Changes in / [b204004:845144e] in sasview


Ignore:
Files:
5 added
2 deleted
19 edited

Legend:

Unmodified
Added
Removed

  • LICENSE.TXT

    r0347c89 rb01252e  
    1111 
    1212THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
     13 
     14Also see https://github.com/SasView/sasview/blob/master/installers/license.txt 

  • docs/sphinx-docs/source/index.rst

    r5a73356a r912e645  
    1010   :maxdepth: 1 
    1111 
    12    User Documentation <user/user> 
     12   USER DOCUMENTATION <user/user> 
    1313 
    14    Developer Documentation <dev/dev> 
     14   DEVELOPER DOCUMENTATION <dev/dev> 
     15    
     16   Release Notes <user/RELEASE> 
     17    

  • docs/sphinx-docs/source/user/tutorial.rst

    re873408 rbe460ce  
    88.. note:: In Windows use [Alt]-[Cursor left] to return to the previous page 
    99 
     10The following tutorial was written for Version 2.x but is still a useful overview of  
     11much of the analysis capability in SasView (but disregard Appendix XIII if using  
     12Version 4.2 or later) 
     13 
     14:download:`Old Tutorial <sasview/Tutorial.pdf>` 
     15 
     16The following tutorials have been written for Version 4.x 
     17 
    1018:download:`Getting Started with Sasview <sasview/getting_started_with_sasview.pdf>` 
    1119 
    … …  
    1422:download:`Simultaneous 1D Fitting in Sasview <sasview/simultaneous_1d_fitting_in_sasview_v3x_4x.pdf>` 
    1523 
    16 :download:`Old Tutorial <sasview/Tutorial.pdf>` 
     24:download:`Correlation Function Analysis in SasView <sasview/correlation_function_analysis_in_sasview_v4x.pdf>` 

  • installers/license.txt

    rd3114cc rc6a4d143  
    88Participating facilities include (in alphabetical order):  
    99the Australian National Science & Technology Centre for Neutron  
    10 Scattering, the Diamond Light Source, the European Spallation Source,  
    11 the Institut Laue Langevin, the ISIS Pulsed Neutron & Muon Source,  
    12 the National Institute of Standards & Technology Center for Neutron  
    13 Research, the Oak Ridge National Laboratory Neutron Sciences  
    14 Directorate, and the Technical University Delft Reactor Institute. 
     10Scattering, the Bundesanstalt fur Materialforschung und prufung, the  
     11Diamond Light Source, the European Spallation Source, the Institut  
     12Laue Langevin, the ISIS Pulsed Neutron & Muon Source, the National  
     13Institute of Standards & Technology Center for Neutron Research,  
     14the Oak Ridge National Laboratory Neutron Sciences Directorate,  
     15and the Technical University Delft Reactor Institute. 
    1516 
    1617SasView is distributed under a 'Three-clause' BSD licence which you  
    … …  
    1920SasView is free to download and use, including for commercial purposes. 
    2021 
    21 © 2009-2018 UMD, UTK, NIST, ORNL, ISIS, ESS, ANSTO, ILL, TUD, DLS  
     22© 2009-2018 UMD, UTK, NIST, ORNL, ISIS, ESS, ANSTO, ILL, TUD, DLS, BAM  
    2223 
    2324 

  • src/sas/sascalc/fit/pagestate.py

    r59873e1 r863ac2c  
    640640                if len(value.strip()) == 0: 
    641641                    continue 
    642                 title = value + " [" + repo_time + "]" 
     642                title = (value + " [" + repo_time + "] [SasView v" + 
     643                         SASVIEW_VERSION + "]") 
    643644                title_name = HEADER % title 
    644645            elif name == "data": 

  • src/sas/sasgui/guiframe/aboutbox.py

    rb963b20 r1b4cb41  
    108108        self.bitmap_button_tudelft = wx.BitmapButton(self, -1, wx.NullBitmap) 
    109109        self.bitmap_button_dls = wx.BitmapButton(self, -1, wx.NullBitmap) 
     110        self.bitmap_button_bam = wx.BitmapButton(self, -1, wx.NullBitmap) 
    110111 
    111112        self.static_line_3 = wx.StaticLine(self, -1) 
    … …  
    128129        self.Bind(wx.EVT_BUTTON, self.onTudelftLogo, self.bitmap_button_tudelft) 
    129130        self.Bind(wx.EVT_BUTTON, self.onDlsLogo, self.bitmap_button_dls) 
     131        self.Bind(wx.EVT_BUTTON, self.onBamLogo, self.bitmap_button_bam) 
    130132        # end wxGlade 
    131133        # fill in acknowledgements 
    … …  
    226228        logo = wx.Bitmap(image) 
    227229        self.bitmap_button_dls.SetBitmapLabel(logo) 
     230 
     231        image = file_dir + "/images/bam_logo.png" 
     232        if os.path.isfile(config._bam_logo): 
     233            image = config._bam_logo 
     234        logo = wx.Bitmap(image) 
     235        self.bitmap_button_bam.SetBitmapLabel(logo) 
    228236 
    229237        # resize dialog window to fit version number nicely 
    … …  
    258266        self.bitmap_button_tudelft.SetSize(self.bitmap_button_tudelft.GetBestSize()) 
    259267        self.bitmap_button_dls.SetSize(self.bitmap_button_dls.GetBestSize()) 
     268        self.bitmap_button_bam.SetSize(self.bitmap_button_bam.GetBestSize()) 
    260269        # end wxGlade 
    261270 
    … …  
    325334        sizer_logos.Add(self.bitmap_button_dls, 0, 
    326335                        wx.LEFT|wx.ADJUST_MINSIZE, 2) 
     336        sizer_logos.Add(self.bitmap_button_bam, 0, 
     337                        wx.LEFT|wx.ADJUST_MINSIZE, 2) 
    327338 
    328339        sizer_logos.Add((10, 50), 0, wx.ADJUST_MINSIZE, 0) 
    … …  
    430441        event.Skip() 
    431442 
     443    def onBamLogo(self, event): 
     444        """ 
     445        """ 
     446        # wxGlade: DialogAbout.<event_handler> 
     447        launchBrowser(config._bam_url) 
     448        event.Skip() 
     449 
    432450# end of class DialogAbout 
    433451 

  • src/sas/sasgui/guiframe/config.py

    r1efbc190 r1b4cb41  
    3333_do_aboutbox = True 
    3434_do_acknowledge = True 
     35_do_release = True 
    3536_do_tutorial = True 
    3637_acknowledgement_preamble =\ 
    … …  
    4950_acknowledgement_citation = \ 
    5051'''M. Doucet et al. SasView Version 4.1.2, Zenodo, 10.5281/zenodo.825675''' 
    51  
    5252_acknowledgement =  \ 
    53 '''This work was originally developed as part of the DANSE project funded by the US NSF under Award DMR-0520547,\n but is currently maintained by a collaboration between UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, DLS, and the scattering community.\n\n SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project (Grant No 654000).\nA list of individual contributors can be found at: http://www.sasview.org/contact.html 
     53'''This work was originally developed as part of the DANSE project funded by the US NSF under Award DMR-0520547,\n but is currently maintained by a collaboration between UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, DLS, BAM and the scattering community.\n\n SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project (Grant No 654000).\nA list of individual contributors can be found at: http://www.sasview.org/contact.html 
    5454''' 
    5555 
    … …  
    9090_tudelft_url = "http://www.tnw.tudelft.nl/en/cooperation/facilities/reactor-instituut-delft/" 
    9191_dls_url = "http://www.diamond.ac.uk/" 
     92_bam_url = "http://www.bam.de/" 
    9293_danse_url = "http://www.cacr.caltech.edu/projects/danse/release/index.html" 
    9394_inst_url = "http://www.utk.edu" 
    9495_corner_image = os.path.join(icon_path, "angles_flat.png") 
    9596_welcome_image = os.path.join(icon_path, "SVwelcome.png") 
    96 _copyright = "(c) 2009 - 2017, UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, and DLS" 
     97_copyright = "(c) 2009 - 2018, UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, DLS and BAM" 
    9798marketplace_url = "http://marketplace.sasview.org/" 
    9899 

  • src/sas/sasgui/guiframe/gui_manager.py

    rb1ec23d rb1ec23d  
    12771277 
    12781278        wx_id = wx.NewId() 
    1279         self._help_menu.Append(wx_id, '&Documentation', '') 
     1279        self._help_menu.Append(wx_id, '&Documentation', 'Help documentation for SasView') 
    12801280        wx.EVT_MENU(self, wx_id, self._onSphinxDocs) 
    12811281 
    12821282        if config._do_tutorial and (IS_WIN or sys.platform == 'darwin'): 
    12831283            wx_id = wx.NewId() 
    1284             self._help_menu.Append(wx_id, '&Tutorial', 'Software tutorial') 
     1284            # Pluralised both occurences of 'Tutorial' in the line below 
     1285            # S King, Sep 2018 
     1286            self._help_menu.Append(wx_id, '&Tutorials', 'Tutorials on how to use SasView') 
    12851287            wx.EVT_MENU(self, wx_id, self._onTutorial) 
     1288 
     1289        if config.marketplace_url: 
     1290            wx_id = wx.NewId() 
     1291            self._help_menu.Append(wx_id, '&Model marketplace', 'Plug-in fitting models for SasView') 
     1292            wx.EVT_MENU(self, wx_id, self._on_marketplace_click) 
     1293 
     1294        if config._do_release: 
     1295            wx_id = wx.NewId() 
     1296            self._help_menu.Append(wx_id, '&Release notes', 
     1297                                   'SasView release notes and known issues') 
     1298            wx.EVT_MENU(self, wx_id, self._onRelease) 
    12861299 
    12871300        if config._do_acknowledge: 
    … …  
    12941307            logger.info("Doing help menu") 
    12951308            wx_id = wx.NewId() 
    1296             self._help_menu.Append(wx_id, '&About', 'Software information') 
     1309            self._help_menu.Append(wx_id, '&About', 'Information about SasView') 
    12971310            wx.EVT_MENU(self, wx_id, self._onAbout) 
    1298  
    1299         if config.marketplace_url: 
    1300             wx_id = wx.NewId() 
    1301             self._help_menu.Append(wx_id, '&Model marketplace', '') 
    1302             wx.EVT_MENU(self, wx_id, self._on_marketplace_click) 
    13031311 
    13041312        # Checking for updates 
    … …  
    21382146            dialog.ShowModal() 
    21392147 
     2148    def _onRelease(self, evt): 
     2149        """ 
     2150        Pop up the release notes 
     2151 
     2152        :param evt: menu event 
     2153 
     2154        """ 
     2155        # S King, Sep 2018 
     2156 
     2157        from documentation_window import DocumentationWindow 
     2158        _TreeLocation = "user/release.html" 
     2159        DocumentationWindow(self, -1, _TreeLocation, "", 
     2160                            "SasView Documentation") 
     2161 
    21402162    def _onTutorial(self, evt): 
    21412163        """ 
    … …  
    21452167 
    21462168        """ 
    2147         if config._do_tutorial: 
    2148             path = config.TUTORIAL_PATH 
    2149             if IS_WIN: 
    2150                 try: 
    2151                     from sas.sasgui.guiframe.pdfview import PDFFrame 
    2152                     dialog = PDFFrame(None, -1, "Tutorial", path) 
    2153                     # put icon 
    2154                     self.put_icon(dialog) 
    2155                     dialog.Show(True) 
    2156                 except: 
    2157                     logger.error("Error in _onTutorial: %s" % sys.exc_value) 
    2158                     try: 
    2159                         # Try an alternate method 
    2160                         logger.error( 
    2161                             "Could not open the tutorial pdf, trying xhtml2pdf") 
    2162                         from xhtml2pdf import pisa 
    2163                         pisa.startViewer(path) 
    2164                     except: 
    2165                         logger.error( 
    2166                             "Could not open the tutorial pdf with xhtml2pdf") 
    2167                         msg = "This feature requires 'PDF Viewer'\n" 
    2168                         wx.MessageBox(msg, 'Error') 
    2169             else: 
    2170                 try: 
    2171                     command = "open '%s'" % path 
    2172                     os.system(command) 
    2173                 except: 
    2174                     try: 
    2175                         # Try an alternate method 
    2176                         logger.error( 
    2177                             "Could not open the tutorial pdf, trying xhtml2pdf") 
    2178                         from xhtml2pdf import pisa 
    2179                         pisa.startViewer(path) 
    2180                     except: 
    2181                         logger.error( 
    2182                             "Could not open the tutorial pdf with xhtml2pdf") 
    2183                         msg = "This feature requires the Preview application\n" 
    2184                         wx.MessageBox(msg, 'Error') 
     2169        # Action changed from that in 2.x/3.x/4.0.x/4.1.x 
     2170        # Help >> Tutorial used to bring up a pdf of the 
     2171        # original 2.x tutorial. 
     2172        # Code below, implemented from 4.2.0, redirects 
     2173        # action to the Tutorials page of the help  
     2174        # documentation to give access to all available 
     2175        # tutorials 
     2176        # S King, Sep 2018 
     2177 
     2178        from documentation_window import DocumentationWindow 
     2179        _TreeLocation = "user/tutorial.html" 
     2180        DocumentationWindow(self, -1, _TreeLocation, "", 
     2181                            "SasView Documentation") 
    21852182 
    21862183    def _onSphinxDocs(self, evt): 

  • src/sas/sasgui/perspectives/corfunc/corfunc_panel.py

    r2a399ca r5652efc  
    2020 
    2121OUTPUT_STRINGS = { 
    22     'max': "Long Period / 2 (A): ", 
     22    'max': "Long Period (A): ", 
    2323    'Lc': "Average Hard Block Thickness (A): ", 
    2424    'dtr': "Average Interface Thickness (A): ", 

  • src/sas/sasgui/perspectives/corfunc/corfunc_state.py

    r1fa4f736 r5652efc  
    2828# List of output parameters, used by __str__ 
    2929output_list = [ 
    30     ['max', "Long Period / 2 (A): "], 
     30    ['max', "Long Period (A): "], 
    3131    ['Lc', "Average Hard Block Thickness (A): "], 
    3232    ['dtr', "Average Interface Thickness (A): "], 

  • src/sas/sasgui/perspectives/corfunc/media/corfunc_help.rst

    r501712f r490f790  
    3333Both analyses are performed in 3 stages: 
    3434 
    35 *  Extrapolation of the scattering curve to :math:`Q = 0` and toward  
    36    :math:`Q = \infty` 
     35*  Extrapolation of the scattering curve to :math:`q = 0` and toward  
     36   :math:`q = \infty` 
    3737*  Smoothed merging of the two extrapolations into the original data 
    3838*  Fourier / Hilbert Transform of the smoothed data to give the correlation 
    … …  
    4747------------- 
    4848 
    49 To :math:`Q = 0` 
     49To :math:`q = 0` 
    5050................ 
    5151 
    … …  
    6767the impact on any extrapolated parameters will be least significant. 
    6868 
    69 To :math:`Q = \infty` 
     69To :math:`q = \infty` 
    7070..................... 
    7171 
    … …  
    145145        - do they smoothly curve onto the ordinate at x = 0? (if not check the value  
    146146          of :math:`\sigma` is sensible) 
    147         - are there ripples at x values corresponding to (2 :math:`pi` over) the two  
     147        - are there ripples at x values corresponding to (2 :math:`\pi` over) the two  
    148148          q values at which the extrapolated and experimental data are merged? 
    149         - are there any artefacts at x values corresponding to 2 :math:`pi` / q\ :sub:`max` in  
     149        - are there any artefacts at x values corresponding to 2 :math:`\pi` / q\ :sub:`max` in  
    150150          the experimental data?  
    151151        - and lastly, do the significant features/peaks in the correlation functions  
    … …  
    158158    -q^{4} I(q) 
    159159 
    160 The IDF is proportional to the second derivative of Γ\ :sub:`1`\ (x). 
     160The IDF is proportional to the second derivative of Γ\ :sub:`1`\ (x) and represents a  
     161superposition of thickness distributions from all the contributing lamellae.  
    161162 
    162163Hilbert 
    … …  
    192193*   Local Crystallinity :math:`= L_c/L_p` 
    193194 
     195.. warning:: If the sample does not possess lamellar morphology then "Compute  
     196    Parameters" will return garbage! 
     197         
     198 
    194199Volume Fraction Profile 
    195200....................... 
    … …  
    213218 
    214219The reader is directed to the references for information on these parameters. 
     220 
    215221 
    216222References 
    … …  
    263269Once the Q ranges have been set, click the "Calculate Bg" button to determine the  
    264270background level. Alternatively, enter your own value into the box. If the box turns  
    265 yellow this indicates that background subtraction has created some negative intensities. 
     271yellow this indicates that background subtraction has created some negative intensities.  
     272This may still be fine provided the peak intensity is very much greater than the  
     273background level. The important point is that the extrapolated dataset must approach  
     274zero at high-q. 
    266275 
    267276Now click the "Extrapolate" button to extrapolate the data. The graph window will update  
    … …  
    296305 
    297306.. note:: 
    298     This help document was last changed by Steve King, 26Sep2017 
     307    This help document was last changed by Steve King, 28Sep2017 

  • src/sas/sasgui/perspectives/corfunc/media/fdr-pdfs.rst

    r959eb01 r577460c  
    77 
    88:download:`Fibre_Diffraction_Review_1994_3_25-29.pdf <Fibre_Diffraction_Review_1994_3_25-29.pdf>` 
     9 
    910:download:`Fibre_Diffraction_Review_2004_12_24.pdf <Fibre_Diffraction_Review_2004_12_24.pdf>` 
     11 
    1012:download:`Fibre_Diffraction_Review_2005_13_19-22.pdf <Fibre_Diffraction_Review_2005_13_19-22.pdf>` 

  • src/sas/sasgui/perspectives/fitting/basepage.py

    rb4398819 r5323490  
    28842884            self.magnetic_on = True 
    28852885            button.SetLabel("Magnetic OFF") 
    2886             m_value = 1.0e-06 
     2886            m_value = 1 
    28872887            for key in self.model.magnetic_params: 
    28882888                if key.count('M0') > 0: 
    28892889                    self.model.setParam(key, m_value) 
    2890                     m_value += 0.5e-06 
     2890                    m_value += 0.5 
    28912891        else: 
    28922892            self.magnetic_on = False 

  • src/sas/sasgui/perspectives/fitting/fitpage.py

    rdabcaf7 rba1c145  
    33    fitting  a model and one data 
    44""" 
     5from __future__ import print_function 
     6 
    57import sys 
    68import wx 
    … …  
    12551257        if saved_pars: 
    12561258            self.get_paste_params(saved_pars) 
     1259 
     1260        # Make sure the model parameters correspond to the fit parameters 
     1261        self._update_paramv_on_fit() 
    12571262 
    12581263        if event is not None: 

  • src/sas/sasgui/perspectives/fitting/fitting.py

    raf7d2e5 raba4559  
    339339        Update custom model list in the fitpage combo box 
    340340        """ 
    341         custom_model = 'Plugin Models' 
    342341        try: 
    343342            # Update edit menus 
    … …  
    347346            if not new_pmodel_list: 
    348347                return 
    349             # Set the new plugin model list for all fit pages 
     348 
     349            # Redraws to a page not in focus are showing up as if they are 
     350            # in the current page tab. 
     351            current_page_index = self.fit_panel.GetSelection() 
     352            current_page = self.fit_panel.GetCurrentPage() 
     353            last_drawn_page = current_page 
     354 
     355            # Set the new plugin model list for all fit pages; anticipating 
     356            # categories, the updated plugin may be in either the form factor 
     357            # or the structure factor combo boxes 
    350358            for uid, page in self.fit_panel.opened_pages.iteritems(): 
    351                 if hasattr(page, "formfactorbox"): 
    352                     page.model_list_box = new_pmodel_list 
    353                     mod_cat = page.categorybox.GetStringSelection() 
    354                     if mod_cat == custom_model: 
    355                         box = page.formfactorbox 
    356                         model_name = box.GetValue() 
    357                         model = (box.GetClientData(box.GetCurrentSelection()) 
    358                                  if model_name else None) 
    359                         page._show_combox_helper() 
    360                         new_index = box.FindString(model_name) 
    361                         new_model = (box.GetClientData(new_index) 
    362                                      if new_index >= 0 else None) 
    363                         if new_index >= 0: 
    364                             box.SetStringSelection(model_name) 
    365                         else: 
    366                             box.SetStringSelection('') 
    367                         if model and new_model != model: 
    368                             page._on_select_model(keep_pars=True) 
    369                     if hasattr(page, "structurebox"): 
    370                         selected_name = page.structurebox.GetStringSelection() 
    371  
    372                         page.structurebox.Clear() 
    373                         page.initialize_combox() 
    374  
    375                         index = page.structurebox.FindString(selected_name) 
    376                         if index == -1: 
    377                             index = 0 
    378                         page.structurebox.SetSelection(index) 
    379                         page._on_select_model() 
     359                pbox = getattr(page, "formfactorbox", None) 
     360                sbox = getattr(page, "structurebox", None) 
     361                if pbox is None: 
     362                    continue 
     363 
     364                # Set the new model list for the page 
     365                page.model_list_box = new_pmodel_list 
     366 
     367                # Grab names of the P and S models from the page.  Need to do 
     368                # this before resetting the form factor box since that clears 
     369                # the structure factor box. 
     370                old_struct = old_form = None 
     371                form_name = pbox.GetValue() 
     372                struct_name = sbox.GetStringSelection() 
     373                if form_name: 
     374                    old_form = pbox.GetClientData(pbox.GetCurrentSelection()) 
     375                if struct_name: 
     376                    old_struct = sbox.GetClientData(sbox.GetCurrentSelection()) 
     377 
     378                # Reset form factor combo box.  We are doing this for all 
     379                # categories not just plugins since eventually the category 
     380                # manager will allow plugin models to be anywhere. 
     381                page._show_combox_helper() 
     382                form_index = pbox.FindString(form_name) 
     383                pbox.SetSelection(form_index) 
     384                new_form = (pbox.GetClientData(form_index) 
     385                            if form_index != wx.NOT_FOUND else None) 
     386                #print("form: %r"%form_name, old_form, new_form) 
     387 
     388                # Reset structure factor combo box; even if the model list 
     389                # hasn't changed, the model may have.  Show the structure 
     390                # factor combobox if the selected model is a form factor. 
     391                sbox.Clear() 
     392                page.initialize_combox() 
     393                if new_form is not None and getattr(new_form, 'is_form_factor', False): 
     394                    sbox.Show() 
     395                    sbox.Enable() 
     396                    page.text2.Show() 
     397                    page.text2.Enable() 
     398                struct_index = sbox.FindString(struct_name) 
     399                sbox.SetSelection(struct_index) 
     400                new_struct = (sbox.GetClientData(struct_index) 
     401                              if struct_index != wx.NOT_FOUND else None) 
     402                #print("struct: %r"%struct_name, old_struct, new_struct) 
     403 
     404                # Update the page if P or S has changed 
     405                if old_form != new_form or old_struct != new_struct: 
     406                    #print("triggering model update") 
     407                    page._on_select_model(keep_pars=True) 
     408                    last_drawn_page = page 
     409 
     410            # If last drawn is not the current, then switch the current to the 
     411            # last drawn then switch back.  Very ugly. 
     412            if last_drawn_page != current_page: 
     413                for page_index in range(self.fit_panel.PageCount): 
     414                    if self.fit_panel.GetPage(page_index) == last_drawn_page: 
     415                        self.fit_panel.SetSelection(page_index) 
     416                        break 
     417                self.fit_panel.SetSelection(current_page_index) 
     418 
    380419        except Exception: 
    381420            logger.error("update_custom_combo: %s", sys.exc_value) 

  • src/sas/sasgui/perspectives/invariant/invariant_state.py

    rfa412df re9920cd  
    130130        my_time, date = self.timestamp 
    131131        file_name = self.file 
     132        from sas.sasview.__init__ import __version__ as sasview_version 
    132133 
    133134        state_num = int(self.saved_state['state_num']) 
    134135        state = "\n[Invariant computation for %s: " % file_name 
    135         state += "performed at %s on %s] \n" % (my_time, date) 
     136        state += "performed at %s on %s] " % (my_time, date) 
     137        state += "[SasView v%s]\n" % (sasview_version) 
    136138        state += "State No.: %d \n" % state_num 
    137139        state += "\n=== Inputs ===\n" 

  • src/sas/sasview/local_config.py

    rb229a3b r1b4cb41  
    3333_do_aboutbox = True 
    3434_do_acknowledge = True 
     35_do_release = True 
    3536_do_tutorial = True 
    3637_acknowledgement_preamble =\ 
    … …  
    4950_acknowledgement_citation = \ 
    5051'''M. Doucet et al. SasView Version 4.2, Zenodo, 10.5281/zenodo.1412041''' 
    51  
    5252_acknowledgement =  \ 
    53 '''This work was originally developed as part of the DANSE project funded by the US NSF under Award DMR-0520547,\n but is currently maintained by a collaboration between UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, DLS, and the scattering community.\n\n SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project (Grant No 654000).\nA list of individual contributors can be found at: http://www.sasview.org/contact.html 
     53'''This work was originally developed as part of the DANSE project funded by the US NSF under Award DMR-0520547,\n but is currently maintained by a collaboration between UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, DLS, BAM and the scattering community.\n\n SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project (Grant No 654000).\nA list of individual contributors can be found at: http://www.sasview.org/contact.html 
    5454''' 
    5555 
    … …  
    7676_tudelft_logo = os.path.join(icon_path, "tudelft_logo.png") 
    7777_dls_logo = os.path.join(icon_path, "dls_logo.png") 
     78_bam_logo = os.path.join(icon_path, "bam_logo.png") 
    7879_nsf_logo = os.path.join(icon_path, "nsf_logo.png") 
    7980_danse_logo = os.path.join(icon_path, "danse_logo.png") 
    … …  
    9495_corner_image = os.path.join(icon_path, "angles_flat.png") 
    9596_welcome_image = os.path.join(icon_path, "SVwelcome.png") 
    96 _copyright = "(c) 2009 - 2017, UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, and DLS" 
     97_copyright = "(c) 2009 - 2018, UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO, TU Delft, DLS and BAM" 
    9798marketplace_url = "http://marketplace.sasview.org/" 
    9899 
Note: See TracChangeset for help on using the changeset viewer.