Changes in / [36d69e1:ba22344] in sasview


Ignore:
Files:
11 edited

Legend:

Unmodified
Added
Removed

  • sasview/README.txt

    r220b1e7 r311d00a  
    441- Features 
    55=========== 
     6    - New in Version 4.1.0 
     7      ------------------ 
     8      This incremental release brings a series of new features and improvements, 
     9      and a host of bug fixes. Of particular note are: 
     10       
     11      - Correlation Function Analysis (Corfunc) 
     12        This performs a correlation function analysis of one-dimensional SAXS/SANS data,  
     13        or generates a model-independent volume fraction profile from the SANS from an  
     14        adsorbed polymer/surfactant layer. 
     15 
     16        A correlation function may be interpreted in terms of an imaginary rod moving  
     17        through the structure of the material. Γ1D(R) is the probability that a rod of  
     18        length R moving through the material has equal electron/neutron scattering  
     19        length density at either end. Hence a frequently occurring spacing within a  
     20        structure manifests itself as a peak. 
     21 
     22        A volume fraction profile \Phi(z) describes how the density of polymer  
     23        segments/surfactant molecules varies with distance from an (assumed locally flat) 
     24        interface. 
     25 
     26      - Fitting of SESANS Data 
     27        Data from Spin-Echo SANS measurements can now be loaded and fitted. The data will  
     28        be plotted against the correct axes and models will automatically perform a Hankel  
     29        transform in order to calculate SESANS from a SANS model. 
     30 
     31      - Documentation 
     32        The documentation has undergone significant checking and updating. 
     33 
     34      - Improvements 
     35        - Correlation function (corfunc) analysis of 1D SAS data added from CCP13 
     36        - File converter tool for multi-file single column data sets 
     37        - SESANS data loading and direct fitting using the Hankel transformation 
     38        - Saving and loading of simultaneous and constrained fits now supported 
     39        - Save states from SasView v3.x.y now loaded using sasmodel model names 
     40        - Saving and loading of projects with 2D fits now supported 
     41        - Loading a project removes all existing data, fits, and plots 
     42        - Structure factor and form factor can be plotted independently 
     43        - OpenCL is disabled by default and can be enabled through a fit menu 
     44        - Data and theory fields are now independently expandable 
     45      - Bug Fixes 
     46        - Fixes #667: Models computed multiple times on parameters changes 
     47        - Fixes #673: Custom models override built in models of same name 
     48        - Fixes #678: Hard crash when running complex models on GPU 
     49        - Fixes $774: Old style plugin models unloadable 
     50        - Fixes #789: stacked disk scale doesn't match cylinder model 
     51        - Fixes #792: core_shell_fractal uses wrong effective radius 
     52        - Fixes #800: Plot range reset on plot redraws 
     53        - Fixes #811 and #825: 2D smearing broken 
     54        - Fixes #815: Integer model parameter handling 
     55        - Fixes #824: Cannot apply sector averaging when no detector data present 
     56        - Fixes #830: Cansas HDF5 reader fully compliant with NXCanSAS v1.0 format 
     57        - Fixes #835: Fractal model breaks with negative Q values 
     58        - Fixes #843: Multilayer vesicle does not define effective radius 
     59        - Fixes #858: Hayter MSA S(Q) returns errors 
     60        - Numerous grammatical and contexual errors in documention 
     61 
     62 
    663    - New in Version 4.0.1 
    764      ------------------ 
    … …  
    426483=============== 
    427484 
     485 
     486   4.1- All systems: 
     487      The conversion to sasmodels infrastructure is ongoing and should be 
     488      completed in the next release. In the meantime this leads to a few known 
     489      issues: 
     490        - The way that orientation is defined is being refactored to address 
     491        long standing issues and comments.  In release 4.1 however only models 
     492        with symmetry (e.g. a=b) have been converted to the new definitions. 
     493        The rest (a <> b <> c - e.g. parellelepiped) maintain the same 
     494        definition as before and will be converted in 4.2.  Note that 
     495        orientational distribution also makes much more sense in the new 
     496        framework.  The documentation should indicate which definition is being 
     497        used for a given model. 
     498        - The infrastructure currently handles internal conversion of old style 
     499        models so that user created models in previous versions should continue 
     500        to work for now. At some point in the future such support will go away. 
     501        Everyone is encouraged to convert to the new structure which should be 
     502        relatively straight forward and provides a number of benefits.  
     503        - In that vein, the distributed models and those generated by the new 
     504        plugin model editor are in the new format, however those generated by 
     505        sum|multiply models are the old style sum|multiply models. This should 
     506        also disappear in the near future  
     507        - The on the fly discovery of plugin models and changes thereto behave 
     508        inconsistently.  If a change to a plugin model does not seem to 
     509        register, the Load Plugin Models (under fitting -> Plugin Model 
     510        Operations) can be used.  However, after calling Load Plugin Models, the 
     511        active plugin will no longer be loaded (even though the GUI looks like 
     512        it is) unless it is a sum|multiply model which works properly.  All 
     513        others will need to be recalled from the model dropdown menu to reload 
     514        the model into the calculation engine.  While it might be annoying it 
     515        does not appear to prevent SasView from working.. 
     516        - The model code and documentation review is ongoing. At this time the 
     517        core shell parellelepiped is known to have the C shell effectively fixed 
     518        at 0 (noted in documentation) while the triaxial ellipsoid does not seem 
     519        to reproduce the limit of the oblate or prolate ellipsoid. If errors are 
     520        found and corrected, corrected versions will be uploaded to the 
     521        marketplace.  
     522    
    428523   3.1- All systems: 
    429524        - The documentation window may take a few seconds to load the first time 

  • sasview/local_config.py

    r73cbeec rf9d1f60  
    3333''' remember to:''' 
    3434_acknowledgement_preamble_bullet1 =\ 
    35 '''Acknowledge its use in your publications as suggested below;''' 
     35'''Acknowledge its use in your publications as :''' 
    3636_acknowledgement_preamble_bullet2 =\ 
    37 '''Reference SasView as : M. Doucet, et al. SasView Version 4.0, Zenodo''' +\ 
    38 ''', http://doi.org/10.5281/zenodo.159083;''' 
     37'''Reference SasView as:''' 
    3938_acknowledgement_preamble_bullet3 =\ 
    40 '''Reference the model you used if appropriate (see documentation for refs);''' 
     39'''Reference the model you used if appropriate (see documentation for refs)''' 
    4140_acknowledgement_preamble_bullet4 =\ 
    4241'''Send us your reference for our records: developers@sasview.org''' 
    4342_acknowledgement_publications = \ 
    44 '''This work benefited from the use of the SasView application, originally developed under NSF Award  
    45 DMR-0520547. SasView also contains code developed with funding from the EU Horizon 2020 programme  
    46 under the SINE2020 project Grant No 654000, and by Patrick O'Brien & Adam Washington.''' 
     43'''This work benefited from the use of the SasView application, originally developed under NSF Award DMR-0520547. SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project Grant No 654000.''' 
     44_acknowledgement_citation = \ 
     45'''M. Doucet et al. SasView Version 4.1, Zenodo, 10.5281/zenodo.438138''' 
    4746 
    4847_acknowledgement =  \ 
    49 '''This work was originally developed as part of the DANSE project funded by the US NSF under Award DMR-0520547, but is currently maintained  
    50 by a collaboration between UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO and TU Delft. SasView also contains code developed with funding from the  
    51 EU Horizon 2020 programme under the SINE2020 project (Grant No 654000), and by Patrick O'Brien (pycrust) and Adam Washington (corfunc-py).''' 
     48'''This work was originally developed as part of the DANSE project funded by the US NSF under Award DMR-0520547,\n but is currently maintained by a collaboration between UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO and TU Delft and the scattering community.\n\n SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project (Grant No 654000).\nA list of individual contributors can be found at: https://github.com/orgs/SasView/people 
     49''' 
    5250 
    5351_homepage = "http://www.sasview.org" 
    … …  
    8987_corner_image = os.path.join(icon_path, "angles_flat.png") 
    9088_welcome_image = os.path.join(icon_path, "SVwelcome.png") 
    91 _copyright = "(c) 2009 - 2016, UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO and TU Delft" 
     89_copyright = "(c) 2009 - 2017, UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO and TU Delft" 
    9290marketplace_url = "http://marketplace.sasview.org/" 
    9391 

  • setup.py

    r1e13b53 r27109e5  
    315315                               'test/1d_data/*', 
    316316                               'test/2d_data/*', 
     317                               'test/convertible_files/*', 
     318                               'test/coordinate_data/*', 
     319                               'test/image_data/*', 
     320                               'test/media/*', 
     321                               'test/other_files/*', 
    317322                               'test/save_states/*', 
    318                                'test/upcoming_formats/*', 
    319                                  'default_categories.json'] 
     323                               'test/sesans_data/*' 
     324                               ] 
    320325packages.append("sas.sasview") 
    321326 

  • src/sas/sascalc/calculator/slit_length_calculator.py

    rb699768 rbfba720  
    1616        # y data 
    1717        self.y = None 
    18         #default slit length 
     18        # default slit length 
    1919        self.slit_length = 0.0 
    2020 
    … …  
    4242        """ 
    4343        # None data do nothing 
    44         if self.y == None or self.x == None: 
     44        if self.y is None or self.x is None: 
    4545            return 
    4646        # set local variable 
    … …  
    5454        y_sum = 0.0 
    5555        y_max = 0.0 
    56         ind = 0.0 
     56        ind = 0 
    5757 
    5858        # sum 10 or more y values until getting max_y, 
    … …  
    7070        # defaults 
    7171        y_half_d = 0.0 
    72         ind = 0.0 
     72        ind = 0 
    7373        # find indices where it crosses y = y_half. 
    7474        while True: 
    … …  
    8181 
    8282        # y value and ind just before passed the spot of the half height 
    83         y_half_u = y[ind-1] 
     83        y_half_u = y[ind - 1] 
    8484 
    8585        # get corresponding x values 
    8686        x_half_d = x[ind] 
    87         x_half_u = x[ind-1] 
     87        x_half_u = x[ind - 1] 
    8888 
    8989        # calculate x at y = y_half using linear interpolation 
    … …  
    9191            x_half = (x_half_d + x_half_u)/2.0 
    9292        else: 
    93             x_half = (x_half_u * (y_half - y_half_d)  \ 
    94                        + x_half_d * (y_half_u - y_half)) \ 
    95                         / (y_half_u - y_half_d) 
     93            x_half = ((x_half_u * (y_half - y_half_d) 
     94                       + x_half_d * (y_half_u - y_half)) 
     95                       / (y_half_u - y_half_d)) 
    9696 
    9797        # Our slit length is half width, so just give half beam value 

  • src/sas/sascalc/dataloader/readers/cansas_reader.py

    rc221349 r8434365  
    930930            self._write_data(datainfo, entry_node) 
    931931        # Transmission Spectrum Info 
    932         self._write_trans_spectrum(datainfo, entry_node) 
     932        # TODO: fix the writer to linearize all data, including T_spectrum 
     933        # self._write_trans_spectrum(datainfo, entry_node) 
    933934        # Sample info 
    934935        self._write_sample_info(datainfo, entry_node) 

  • src/sas/sascalc/fit/BumpsFitting.py

    r345e7e4 r1a30720  
    352352    except Exception as exc: 
    353353        best, fbest = None, numpy.NaN 
    354         errors = [str(exc), traceback.traceback.format_exc()] 
     354        errors = [str(exc), traceback.format_exc()] 
    355355    finally: 
    356356        mapper.stop_mapper(fitdriver.mapper) 

  • src/sas/sasgui/guiframe/acknowledgebox.py

    rc1fdf84 r74c8cd0  
    1111import wx.richtext 
    1212import wx.lib.hyperlink 
     13from wx.lib.expando import ExpandoTextCtrl 
    1314import random 
    1415import os.path 
    … …  
    3637    Shows the current method for acknowledging SasView in 
    3738    scholarly publications. 
    38  
    3939    """ 
    4040 
    … …  
    4444        wx.Dialog.__init__(self, *args, **kwds) 
    4545 
    46         self.ack = wx.TextCtrl(self, style=wx.TE_LEFT|wx.TE_MULTILINE|wx.TE_BESTWRAP|wx.TE_READONLY|wx.TE_NO_VSCROLL) 
     46        self.ack = ExpandoTextCtrl(self, style=wx.TE_LEFT|wx.TE_MULTILINE|wx.TE_BESTWRAP|wx.TE_READONLY|wx.TE_NO_VSCROLL) 
    4747        self.ack.SetValue(config._acknowledgement_publications) 
    48         self.ack.SetMinSize((-1, 55)) 
     48        #self.ack.SetMinSize((-1, 55)) 
     49        self.citation = ExpandoTextCtrl(self, style=wx.TE_LEFT|wx.TE_MULTILINE|wx.TE_BESTWRAP|wx.TE_READONLY|wx.TE_NO_VSCROLL) 
     50        self.citation.SetValue(config._acknowledgement_citation) 
    4951        self.preamble = wx.StaticText(self, -1, config._acknowledgement_preamble) 
    5052        items = [config._acknowledgement_preamble_bullet1, 
    … …  
    5254                 config._acknowledgement_preamble_bullet3, 
    5355                 config._acknowledgement_preamble_bullet4] 
    54         self.list1 = wx.StaticText(self, -1, "\t(1) " + items[0]) 
    55         self.list2 = wx.StaticText(self, -1, "\t(2) " + items[1]) 
    56         self.list3 = wx.StaticText(self, -1, "\t(3) " + items[2]) 
    57         self.list4 = wx.StaticText(self, -1, "\t(4) " + items[3]) 
     56        self.list1 = wx.StaticText(self, -1, "(1) " + items[0]) 
     57        self.list2 = wx.StaticText(self, -1, "(2) " + items[1]) 
     58        self.list3 = wx.StaticText(self, -1, "(3) " + items[2]) 
     59        self.list4 = wx.StaticText(self, -1, "(4) " + items[3]) 
    5860        self.static_line = wx.StaticLine(self, 0) 
    5961        self.__set_properties() 
    … …  
    6971        self.SetTitle("Acknowledging SasView") 
    7072        #Increased size of box from (525, 225), SMK, 04/10/16 
    71         self.SetSize((600, 300)) 
     73        self.SetClientSize((600, 320)) 
    7274        # end wxGlade 
    7375 
    … …  
    8183        sizer_titles.Add(self.preamble, 0, wx.ALL|wx.EXPAND, 5) 
    8284        sizer_titles.Add(self.list1, 0, wx.ALL|wx.EXPAND, 5) 
     85        sizer_titles.Add(self.ack, 0, wx.ALL|wx.EXPAND, 5) 
    8386        sizer_titles.Add(self.list2, 0, wx.ALL|wx.EXPAND, 5) 
     87        sizer_titles.Add(self.citation, 0, wx.ALL|wx.EXPAND, 5) 
    8488        sizer_titles.Add(self.list3, 0, wx.ALL|wx.EXPAND, 5) 
     89        #sizer_titles.Add(self.static_line, 0, wx.ALL|wx.EXPAND, 0) 
    8590        sizer_titles.Add(self.list4, 0, wx.ALL|wx.EXPAND, 5) 
    86         sizer_titles.Add(self.static_line, 0, wx.ALL|wx.EXPAND, 0) 
    87         sizer_titles.Add(self.ack, 0, wx.ALL|wx.EXPAND, 5) 
    8891        sizer_main.Add(sizer_titles, -1, wx.ALL|wx.EXPAND, 5) 
    8992        self.SetAutoLayout(True) 
    … …  
    9194        self.Layout() 
    9295        self.Centre() 
     96        #self.SetClientSize(sizer_main.GetSize()) 
    9397        # end wxGlade 
    9498 

  • src/sas/sasgui/guiframe/config.py

    rd85c194 rf9d1f60  
    11""" 
    2 Application settings 
     2    Application settings 
    33""" 
     4import time 
    45import os 
    5 import time 
    66from sas.sasgui.guiframe.gui_style import GUIFRAME 
     7import sas.sasview 
     8import logging 
     9 
    710# Version of the application 
    8 __appname__ = "DummyView" 
    9 __version__ = '0.0.0' 
    10 __build__ = '1' 
     11__appname__ = "SasView" 
     12__version__ = sas.sasview.__version__ 
     13__build__ = sas.sasview.__build__ 
    1114__download_page__ = 'https://github.com/SasView/sasview/releases' 
    1215__update_URL__ = 'http://www.sasview.org/latestversion.json' 
    1316 
    14  
    1517# Debug message flag 
    16 __EVT_DEBUG__ = True 
     18__EVT_DEBUG__ = False 
    1719 
    1820# Flag for automated testing 
    … …  
    2931_acknowledgement_preamble =\ 
    3032'''To ensure the long term support and development of this software please''' +\ 
    31 ''' remember to do the following.''' 
     33''' remember to:''' 
    3234_acknowledgement_preamble_bullet1 =\ 
    33 '''Acknowledge its use in your publications as suggested below''' 
     35'''Acknowledge its use in your publications as :''' 
    3436_acknowledgement_preamble_bullet2 =\ 
    35 '''Reference the following website: http://www.sasview.org''' 
     37'''Reference SasView as:''' 
    3638_acknowledgement_preamble_bullet3 =\ 
    3739'''Reference the model you used if appropriate (see documentation for refs)''' 
    … …  
    3941'''Send us your reference for our records: developers@sasview.org''' 
    4042_acknowledgement_publications = \ 
    41 '''This work benefited from the use of the SasView application, originally 
    42 developed under NSF award DMR-0520547. 
     43'''This work benefited from the use of the SasView application, originally developed under NSF Award DMR-0520547. SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project Grant No 654000.''' 
     44_acknowledgement_citation = \ 
     45'''M. Doucet et al. SasView Version 4.1, Zenodo, 10.5281/zenodo.438138''' 
     46 
     47_acknowledgement =  \ 
     48'''This work was originally developed as part of the DANSE project funded by the US NSF under Award DMR-0520547,\n but is currently maintained by a collaboration between UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO and TU Delft and the scattering community.\n\n SasView also contains code developed with funding from the EU Horizon 2020 programme under the SINE2020 project (Grant No 654000).\nA list of individual contributors can be found at: https://github.com/orgs/SasView/people 
    4349''' 
    44 _acknowledgement =  \ 
    45 '''This work originally developed as part of the DANSE project funded by the NSF 
    46 under grant DMR-0520547, and currently maintained by NIST, UMD, ORNL, ISIS, ESS 
    47 and ILL. 
    4850 
    49 ''' 
    5051_homepage = "http://www.sasview.org" 
    51 _download = "http://sourceforge.net/projects/sasview/files/" 
     52_download = __download_page__ 
    5253_authors = [] 
    5354_paper = "http://sourceforge.net/p/sasview/tickets/" 
    5455_license = "mailto:help@sasview.org" 
    55 _nsf_logo = "images/nsf_logo.png" 
    56 _danse_logo = "images/danse_logo.png" 
    57 _inst_logo = "images/utlogo.gif" 
    58 _nist_logo = "images/nist_logo.png" 
    59 _umd_logo = "images/umd_logo.png" 
    60 _sns_logo = "images/sns_logo.png" 
    61 _isis_logo = "images/isis_logo.png" 
    62 _ess_logo = "images/ess_logo.png" 
    63 _ill_logo = "images/ill_logo.png" 
     56 
     57 
     58icon_path = os.path.abspath(os.path.join(os.path.dirname(__file__), "images")) 
     59logging.info("icon path: %s" % icon_path) 
     60media_path = os.path.abspath(os.path.join(os.path.dirname(__file__), "media")) 
     61test_path = os.path.abspath(os.path.join(os.path.dirname(__file__), "test")) 
     62 
     63_nist_logo = os.path.join(icon_path, "nist_logo.png") 
     64_umd_logo = os.path.join(icon_path, "umd_logo.png") 
     65_sns_logo = os.path.join(icon_path, "sns_logo.png") 
     66_ornl_logo = os.path.join(icon_path, "ornl_logo.png") 
     67_isis_logo = os.path.join(icon_path, "isis_logo.png") 
     68_ess_logo = os.path.join(icon_path, "ess_logo.png") 
     69_ill_logo = os.path.join(icon_path, "ill_logo.png") 
     70_ansto_logo = os.path.join(icon_path, "ansto_logo.png") 
     71_tudelft_logo = os.path.join(icon_path, "tudelft_logo.png") 
     72_nsf_logo = os.path.join(icon_path, "nsf_logo.png") 
     73_danse_logo = os.path.join(icon_path, "danse_logo.png") 
     74_inst_logo = os.path.join(icon_path, "utlogo.gif") 
    6475_nist_url = "http://www.nist.gov/" 
    6576_umd_url = "http://www.umd.edu/" 
    6677_sns_url = "http://neutrons.ornl.gov/" 
     78_ornl_url = "http://neutrons.ornl.gov/" 
    6779_nsf_url = "http://www.nsf.gov" 
    68 _danse_url = "http://www.cacr.caltech.edu/projects/danse/release/index.html" 
    69 _inst_url = "http://www.utk.edu" 
    7080_isis_url = "http://www.isis.stfc.ac.uk/" 
    7181_ess_url = "http://ess-scandinavia.eu/" 
    7282_ill_url = "http://www.ill.eu/" 
    73 _corner_image = "images/angles_flat.png" 
    74 _welcome_image = "images/SVwelcome.png" 
    75 _copyright = "(c) 2008, University of Tennessee" 
    76 #edit the lists below of file state your plugin can read 
    77 #for sasview this how you can edit these lists 
    78 #PLUGIN_STATE_EXTENSIONS = ['.prv','.fitv', '.inv'] 
    79 #APPLICATION_STATE_EXTENSION = '.svs' 
    80 #PLUGINS_WLIST = ['P(r) files (*.prv)|*.prv', 
    81 #                  'Fitting files (*.fitv)|*.fitv', 
    82 #                  'Invariant files (*.inv)|*.inv'] 
    83 #APPLICATION_WLIST = 'SasView files (*.svs)|*.svs' 
    84 APPLICATION_WLIST = '' 
    85 APPLICATION_STATE_EXTENSION = None 
    86 PLUGINS_WLIST = [] 
    87 PLUGIN_STATE_EXTENSIONS = [] 
    88 SPLASH_SCREEN_PATH = "images/danse_logo.png" 
    89 DEFAULT_STYLE = GUIFRAME.SINGLE_APPLICATION 
    90 SPLASH_SCREEN_WIDTH = 500 
    91 SPLASH_SCREEN_HEIGHT = 300 
    92 WELCOME_PANEL_ON = False 
    93 TUTORIAL_PATH = None 
    94 SS_MAX_DISPLAY_TIME = 1500 
    95 PLOPANEL_WIDTH = 350 
    96 PLOPANEL_HEIGTH = 350 
    97 GUIFRAME_WIDTH = 1000 
    98 GUIFRAME_HEIGHT = 800 
    99 CONTROL_WIDTH = -1 
    100 CONTROL_HEIGHT = -1 
    101 SetupIconFile_win = os.path.join("images", "ball.ico") 
    102 SetupIconFile_mac = os.path.join("images", "ball.icns") 
    103 DefaultGroupName = "DANSE" 
    104 OutputBaseFilename = "setupGuiFrame" 
     83_ansto_url = "http://www.ansto.gov.au/" 
     84_tudelft_url = "http://www.tnw.tudelft.nl/en/cooperation/facilities/reactor-instituut-delft/" 
     85_danse_url = "http://www.cacr.caltech.edu/projects/danse/release/index.html" 
     86_inst_url = "http://www.utk.edu" 
     87_corner_image = os.path.join(icon_path, "angles_flat.png") 
     88_welcome_image = os.path.join(icon_path, "SVwelcome.png") 
     89_copyright = "(c) 2009 - 2017, UTK, UMD, NIST, ORNL, ISIS, ESS, ILL, ANSTO and TU Delft" 
     90marketplace_url = "http://marketplace.sasview.org/" 
     91 
     92#edit the list of file state your plugin can read 
     93APPLICATION_WLIST = 'SasView files (*.svs)|*.svs' 
     94APPLICATION_STATE_EXTENSION = '.svs' 
     95GUIFRAME_WIDTH = 1150 
     96GUIFRAME_HEIGHT = 840 
     97PLUGIN_STATE_EXTENSIONS = ['.fitv', '.inv', '.prv', '.crf'] 
     98PLUGINS_WLIST = ['Fitting files (*.fitv)|*.fitv', 
     99                 'Invariant files (*.inv)|*.inv', 
     100                 'P(r) files (*.prv)|*.prv', 
     101                 'Corfunc files (*.crf)|*.crf'] 
     102PLOPANEL_WIDTH = 415 
     103PLOPANEL_HEIGTH = 370 
    105104DATAPANEL_WIDTH = 235 
    106105DATAPANEL_HEIGHT = 700 
     106SPLASH_SCREEN_PATH = os.path.join(icon_path, "SVwelcome_mini.png") 
     107TUTORIAL_PATH = os.path.join(media_path, "Tutorial.pdf") 
     108DEFAULT_STYLE = GUIFRAME.MULTIPLE_APPLICATIONS|GUIFRAME.MANAGER_ON\ 
     109                    |GUIFRAME.CALCULATOR_ON|GUIFRAME.TOOLBAR_ON 
     110SPLASH_SCREEN_WIDTH = 512 
     111SPLASH_SCREEN_HEIGHT = 366 
     112SS_MAX_DISPLAY_TIME = 2000 
     113WELCOME_PANEL_ON = True 
     114WELCOME_PANEL_SHOW = False 
     115CLEANUP_PLOT = False 
     116# OPEN and SAVE project menu 
     117OPEN_SAVE_PROJECT_MENU = True 
     118#VIEW MENU 
     119VIEW_MENU = True 
     120#EDIT MENU 
     121EDIT_MENU = True 
     122 
     123SetupIconFile_win = os.path.join(icon_path, "ball.ico") 
     124SetupIconFile_mac = os.path.join(icon_path, "ball.icns") 
     125DefaultGroupName = "." 
     126OutputBaseFilename = "setupSasView" 
     127 
    107128FIXED_PANEL = True 
    108129DATALOADER_SHOW = True 
    … …  
    113134# set a default perspective 
    114135DEFAULT_PERSPECTIVE = 'None' 
    115 # OPEN and SAVE project menu 
    116 OPEN_SAVE_PROJECT_MENU = True 
    117 CLEANUP_PLOT = False 
    118 # OPEN and SAVE project menu 
    119 OPEN_SAVE_PROJECT_MENU = False 
    120 #VIEW MENU 
    121 VIEW_MENU = False 
    122 #EDIT MENU 
    123 EDIT_MENU = False 
    124 import wx.lib.newevent 
    125 (StatusBarEvent, EVT_STATUS) = wx.lib.newevent.NewEvent() 
     136 
     137# Time out for updating sasview 
     138UPDATE_TIMEOUT = 2 
     139 
     140#OpenCL option 
     141SAS_OPENCL = None 
    126142 
    127143def printEVT(message): 
    128     """ 
    129     :TODO - need method documentation 
    130     """ 
    131144    if __EVT_DEBUG__: 
     145        """ 
     146        :TODO - Need method doc string 
     147        """ 
    132148        print "%g:  %s" % (time.clock(), message) 
    133      
     149 
    134150        if __EVT_DEBUG_2_FILE__: 
    135151            out = open(__EVT_DEBUG_FILENAME__, 'a') 
    136152            out.write("%10g:  %s\n" % (time.clock(), message)) 
    137153            out.close() 
    138              

  • src/sas/sasgui/perspectives/fitting/fitting.py

    rddbac66 r4c5098c  
    17551755                                          data_id="Data  " + data.name + " unsmeared", 
    17561756                                          dy=unsmeared_error) 
    1757                  
    1758             if sq_model is not None and pq_model is not None: 
    1759                 self.create_theory_1D(x, sq_model, page_id, model, data, state, 
    1760                                       data_description=model.name + " S(q)", 
    1761                                       data_id=str(page_id) + " " + data.name + " S(q)") 
    1762                 self.create_theory_1D(x, pq_model, page_id, model, data, state, 
    1763                                       data_description=model.name + " P(q)", 
    1764                                       data_id=str(page_id) + " " + data.name + " P(q)") 
    1765  
     1757            # Comment this out until we can get P*S models with correctly populated parameters 
     1758            #if sq_model is not None and pq_model is not None: 
     1759            #    self.create_theory_1D(x, sq_model, page_id, model, data, state, 
     1760            #                          data_description=model.name + " S(q)", 
     1761            #                          data_id=str(page_id) + " " + data.name + " S(q)") 
     1762            #    self.create_theory_1D(x, pq_model, page_id, model, data, state, 
     1763            #                          data_description=model.name + " P(q)", 
     1764            #                          data_id=str(page_id) + " " + data.name + " P(q)") 
    17661765 
    17671766            current_pg = self.fit_panel.get_page_by_id(page_id) 

  • src/sas/sasgui/perspectives/fitting/pagestate.py

    rd5aff7f r27109e5  
    819819 
    820820        attr = newdoc.createAttribute("version") 
    821         import sasview 
     821        from sas import sasview 
    822822        attr.nodeValue = sasview.__version__ 
    823823        # attr.nodeValue = '1.0' 

  • test/corfunc/test/utest_corfunc.py

    racefa2b r253eb6c6  
    88from sas.sascalc.corfunc.corfunc_calculator import CorfuncCalculator 
    99from sas.sascalc.dataloader.data_info import Data1D 
    10 import matplotlib.pyplot as plt 
     10 
    1111 
    1212class TestCalculator(unittest.TestCase): 
    … …  
    6969        self.assertLess(abs(params['max']-75), 2.5) # L_p ~= 75 
    7070 
    71  
    7271    # Ensure tests are ran in correct order; 
    7372    # Each test depends on the one before it 
Note: See TracChangeset for help on using the changeset viewer.