simfitpage.py @ 2a399ca

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalcmagnetic_scattrelease-4.2.2ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 2a399ca was a9f9ca4, checked in by butler, 8 years ago
finish fixing all places that needed to point to combined batch instead of constratined/simultaneous fits addressing #597
Property mode set to `100644`
File size: 43.0 KB

Line
1	"""
2	Simultaneous or Batch fit page
3	"""
4	# Note that this is used for both Simultaneous/Constrained fit AND for
5	# combined batch fit. This is done through setting of the batch_on parameter.
6	# There are the a half dozen or so places where an if statement is used as in
7	# if not batch_on:
8	# xxxx
9	# else:
10	# xxxx
11	# This is just wrong but dont have time to fix this go. Proper approach would be
12	# to strip all parts of the code that depend on batch_on and create the top
13	# level class from which a contrained/simultaneous fit page and a combined
14	# batch page inherit.
15	#
16	# 04/09/2017 --PDB
17
18	import sys
19	from collections import namedtuple
20
21	import wx
22	import wx.lib.newevent
23	from wx.lib.scrolledpanel import ScrolledPanel
24
25	from sas.sasgui.guiframe.events import StatusEvent, PanelOnFocusEvent
26	from sas.sasgui.guiframe.panel_base import PanelBase
27	from sas.sasgui.guiframe.utils import IdList
28	from sas.sasgui.guiframe.documentation_window import DocumentationWindow
29
30	# Control panel width
31	if sys.platform.count("darwin") == 0:
32	PANEL_WID = 420
33	FONT_VARIANT = 0
34	else:
35	PANEL_WID = 490
36	FONT_VARIANT = 1
37
38
39	# Each constraint requires five widgets and sizer. Package them in
40	# a named tuple for easy access.
41	ConstraintLine = namedtuple('ConstraintLine',
42	'model_cbox param_cbox egal_txt constraint btRemove sizer')
43
44
45	def get_fittableParam(model):
46	"""
47	return list of fittable parameters from a model
48
49	:param model: the model used
50
51	"""
52	fittable_param = []
53	for item in model.getParamList():
54	if not item in model.getDispParamList():
55	if not item in model.non_fittable:
56	fittable_param.append(item)
57
58	for item in model.fixed:
59	fittable_param.append(item)
60
61	return fittable_param
62
63
64	class SimultaneousFitPage(ScrolledPanel, PanelBase):
65	"""
66	Simultaneous fitting panel
67	All that needs to be defined are the
68	two data members window_name and window_caption
69	"""
70	# Internal name for the AUI manager
71	window_name = "Simultaneous Fit Page"
72	# Title to appear on top of the window
73	window_caption = "Simultaneous Fit Page"
74	ID_DOC = wx.NewId()
75	ID_SET_ALL = wx.NewId()
76	ID_FIT = wx.NewId()
77	ID_ADD = wx.NewId()
78	_id_pool = IdList()
79
80	def __init__(self, parent, page_finder={}, id=wx.ID_ANY, batch_on=False,
81	args, *kwargs):
82	ScrolledPanel.__init__(self, parent, id=id,
83	style=wx.FULL_REPAINT_ON_RESIZE,
84	args, *kwargs)
85	PanelBase.__init__(self, parent)
86	"""
87	Simultaneous page display
88	"""
89	self._ids = iter(self._id_pool)
90	self.SetupScrolling()
91	# Font size
92	self.SetWindowVariant(variant=FONT_VARIANT)
93	self.uid = wx.NewId()
94	self.parent = parent
95	self.batch_on = batch_on
96	# store page_finder
97	self.page_finder = page_finder
98	# list containing info to set constraint
99	# look like self.constraint_dict[page_id]= page
100	self.constraint_dict = {}
101	# item list
102	# self.constraints_list=[combobox1, combobox2,=,textcrtl, button ]
103	self.constraints_list = []
104	# list of current model
105	self.model_list = []
106	# selected model to fit
107	self.model_to_fit = []
108	# Control the fit state
109	self.fit_started = False
110	# number of constraint
111	self.nb_constraint = 0
112	self.state = SimFitPageState()
113	self.model_cbox_left = None
114	self.model_cbox_right = None
115	# draw page
116	self.define_page_structure()
117	self.draw_page()
118	self._set_save_flag(False)
119
120	def define_page_structure(self):
121	"""
122	Create empty sizers, their hierarchy and set the sizer for the panel
123	"""
124	self.vbox = wx.BoxSizer(wx.VERTICAL)
125	self.data_selection_sizer = wx.BoxSizer(wx.VERTICAL)
126	self.constraints_sizer = wx.BoxSizer(wx.VERTICAL)
127	self.run_fit_sizer = wx.BoxSizer(wx.VERTICAL)
128
129	self.data_selection_sizer.SetMinSize((PANEL_WID, -1))
130	self.constraints_sizer.SetMinSize((PANEL_WID, -1))
131	self.run_fit_sizer.SetMinSize((PANEL_WID, -1))
132	self.vbox.Add(self.data_selection_sizer)
133	self.vbox.Add(self.constraints_sizer)
134	self.vbox.Add(self.run_fit_sizer)
135	self.SetSizer(self.vbox)
136	self.Centre()
137
138	def set_state(self):
139	"""
140	Define a set of state parameters for saving simultaneous fits.
141	"""
142	self._set_constraint()
143	self.state.fit_page_no = self.uid
144	self.state.select_all = self.cb1.GetValue()
145	self.state.model_list = self.model_list
146	self.state.model_to_fit = self.model_to_fit
147	self.state.no_constraint = self.nb_constraint
148	self.state.constraint_dict = self.constraint_dict
149	self.state.constraints_list = self.constraints_list
150	return self.get_state()
151
152	def get_state(self):
153	"""
154	Return the state of the current page
155	:return: self.state
156	"""
157	return self.state
158
159	def draw_page(self):
160	"""
161	Construct the Simultaneous/Constrained fit page. fills the first
162	region (sizer1) with the list of available fit page pairs of data
163	and models. Then fills sizer2 with the checkbox for adding
164	constraints, and finally fills sizer3 with the fit button and
165	instructions.
166	"""
167
168	# create blank list of constraints
169	self.model_list = []
170	self.model_to_fit = []
171	self.constraints_list = []
172	self.constraint_dict = {}
173	self.nb_constraint = 0
174	self.model_cbox_left = None
175	self.model_cbox_right = None
176
177	if len(self.model_list) > 0:
178	for item in self.model_list:
179	item[0].SetValue(False)
180	self.manager.schedule_for_fit(value=0, uid=item[2])
181
182	#-------------------------------------------------------
183	# setup sizer1 (which fitpages to include)
184	self.data_selection_sizer.Clear(True)
185	box_description = wx.StaticBox(self, wx.ID_ANY, "Fit Combinations")
186	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
187	sizer_title = wx.BoxSizer(wx.HORIZONTAL)
188	sizer_couples = wx.GridBagSizer(5, 5)
189
190	# The wx GUI has a flag to enable a menu item, but can still be
191	# reached via scripting. There is no guearantee future GUI
192	# implementations force this check, either.
193	# IMHO, this if statement should stay -- JRK 2016-OCT-05
194	if len(self.page_finder) == 0:
195	msg = " No fit combinations are found! \n\n"
196	msg += " Please load data and set up "
197	msg += "at least one fit panels first..."
198	sizer_title.Add(wx.StaticText(self, wx.ID_ANY, msg))
199	else:
200	# store model
201	self._store_model()
202
203	self.cb1 = wx.CheckBox(self, wx.ID_ANY, 'Select all')
204	self.cb1.SetValue(False)
205	wx.EVT_CHECKBOX(self, self.cb1.GetId(), self.check_all_model_name)
206
207	sizer_title.Add((10, 10), 0,
208	wx.TOP \| wx.BOTTOM \| wx.EXPAND \| wx.ADJUST_MINSIZE, border=5)
209	sizer_title.Add(self.cb1, 0,
210	wx.TOP \| wx.BOTTOM \| wx.LEFT \| wx.EXPAND \| wx.ADJUST_MINSIZE,
211	border=5)
212
213	# draw list of model and data names
214	self._fill_sizer_model_list(sizer_couples)
215
216	boxsizer1.Add(sizer_title, flag=wx.TOP \| wx.BOTTOM, border=5)
217	boxsizer1.Add(sizer_couples, 1, flag=wx.TOP \| wx.BOTTOM, border=5)
218	self.data_selection_sizer.Add(boxsizer1, 1, wx.EXPAND \| wx.ALL, 10)
219	# self.sizer1.Layout()
220
221	#--------------------------------------------------------
222	# set up the other 2 sizers: the constraints list and the
223	# buttons (fit, help etc) sizer at the bottom of the page.
224	# Note: the if statement should be removed along with the above
225	# if statement as soon as it can be properly tested.
226	# Nov. 22 2015 --PDB
227	# As above, this page can be accessed through other means than the
228	# base SasView GUI.
229	# Oct. 5, 2016 --JRK
230	if len(self.page_finder) > 0:
231	# draw the sizer containing constraint info
232	if not self.batch_on:
233	self._fill_sizer_constraint()
234	# draw fit button sizer
235	self._fill_sizer_fit()
236
237	def _fill_sizer_model_list(self, sizer):
238	"""
239	Receive a dictionary containing information to display model name
240	"""
241	ix = 0
242	iy = 0
243	sizer.Clear(True)
244
245	new_name = wx.StaticText(self, wx.ID_ANY, ' Model Title ',
246	style=wx.ALIGN_CENTER)
247	new_name.SetBackgroundColour('orange')
248	new_name.SetForegroundColour(wx.WHITE)
249	sizer.Add(new_name, (iy, ix), (1, 1),
250	wx.LEFT \| wx.EXPAND \| wx.ADJUST_MINSIZE, 15)
251	ix += 2
252	model_type = wx.StaticText(self, wx.ID_ANY, ' Model ')
253	model_type.SetBackgroundColour('grey')
254	model_type.SetForegroundColour(wx.WHITE)
255	sizer.Add(model_type, (iy, ix), (1, 1),
256	wx.EXPAND \| wx.ADJUST_MINSIZE, 0)
257	ix += 1
258	data_used = wx.StaticText(self, wx.ID_ANY, ' Data ')
259	data_used.SetBackgroundColour('grey')
260	data_used.SetForegroundColour(wx.WHITE)
261	sizer.Add(data_used, (iy, ix), (1, 1),
262	wx.EXPAND \| wx.ADJUST_MINSIZE, 0)
263	ix += 1
264	tab_used = wx.StaticText(self, wx.ID_ANY, ' FitPage ')
265	tab_used.SetBackgroundColour('grey')
266	tab_used.SetForegroundColour(wx.WHITE)
267	sizer.Add(tab_used, (iy, ix), (1, 1),
268	wx.EXPAND \| wx.ADJUST_MINSIZE, 0)
269	for id, value in self.page_finder.iteritems():
270	if id not in self.parent.opened_pages:
271	continue
272
273	if self.batch_on != self.parent.get_page_by_id(id).batch_on:
274	continue
275
276	data_list = []
277	model_list = []
278	# get data name and model objetta
279	for fitproblem in value.get_fit_problem():
280
281	data = fitproblem.get_fit_data()
282	if not data.is_data:
283	continue
284	name = '-'
285	if data is not None and data.is_data:
286	name = str(data.name)
287	data_list.append(name)
288
289	model = fitproblem.get_model()
290	if model is None:
291	continue
292	model_list.append(model)
293
294	if len(model_list) == 0:
295	continue
296	# Draw sizer
297	ix = 0
298	iy += 1
299	model = model_list[0]
300	name = '_'
301	if model is not None:
302	name = str(model.name)
303	cb = wx.CheckBox(self, wx.ID_ANY, name)
304	cb.SetValue(False)
305	cb.Enable(model is not None and data.is_data)
306	sizer.Add(cb, (iy, ix), (1, 1),
307	wx.LEFT \| wx.EXPAND \| wx.ADJUST_MINSIZE, 15)
308	wx.EVT_CHECKBOX(self, cb.GetId(), self.check_model_name)
309	ix += 2
310	model_type = wx.StaticText(self, wx.ID_ANY,
311	model.__class__.__name__)
312	sizer.Add(model_type, (iy, ix), (1, 1),
313	wx.EXPAND \| wx.ADJUST_MINSIZE, 0)
314	if self.batch_on:
315	data_used = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY)
316	data_used.AppendItems(data_list)
317	data_used.SetSelection(0)
318	else:
319	data_used = wx.StaticText(self, wx.ID_ANY, data_list[0])
320
321	ix += 1
322	sizer.Add(data_used, (iy, ix), (1, 1),
323	wx.EXPAND \| wx.ADJUST_MINSIZE, 0)
324	ix += 1
325	caption = value.get_fit_tab_caption()
326	tab_caption_used = wx.StaticText(self, wx.ID_ANY, str(caption))
327	sizer.Add(tab_caption_used, (iy, ix), (1, 1),
328	wx.EXPAND \| wx.ADJUST_MINSIZE, 0)
329
330	self.model_list.append([cb, value, id, model])
331
332	iy += 1
333	sizer.Add((20, 20), (iy, ix), (1, 1),
334	wx.LEFT \| wx.EXPAND \| wx.ADJUST_MINSIZE, 15)
335
336	def _fill_sizer_constraint(self):
337	"""
338	Fill sizer containing constraint info
339	"""
340	msg = "Select at least 1 model to add constraint "
341	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
342
343	self.constraints_sizer.Clear(True)
344	if self.batch_on:
345	if self.constraints_sizer.IsShown():
346	self.constraints_sizer.Show(False)
347	return
348	box_description = wx.StaticBox(self, wx.ID_ANY, "Fit Constraints")
349	box_sizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
350	sizer_title = wx.BoxSizer(wx.HORIZONTAL)
351	self.sizer_all_constraints = wx.BoxSizer(wx.HORIZONTAL)
352	self.sizer_constraints = wx.BoxSizer(wx.VERTICAL)
353	sizer_button = wx.BoxSizer(wx.HORIZONTAL)
354
355	self.hide_constraint = wx.RadioButton(self, wx.ID_ANY, 'No', (10, 10),
356	style=wx.RB_GROUP)
357	self.show_constraint = wx.RadioButton(self, wx.ID_ANY, 'Yes', (10, 30))
358	self.Bind(wx.EVT_RADIOBUTTON, self._display_constraint,
359	id=self.hide_constraint.GetId())
360	self.Bind(wx.EVT_RADIOBUTTON, self._display_constraint,
361	id=self.show_constraint.GetId())
362	if self.batch_on:
363	self.hide_constraint.Enable(False)
364	self.show_constraint.Enable(False)
365	self.hide_constraint.SetValue(True)
366	self.show_constraint.SetValue(False)
367
368	sizer_title.Add(wx.StaticText(self, wx.ID_ANY, " Model"))
369	sizer_title.Add((10, 10))
370	sizer_title.Add(wx.StaticText(self, wx.ID_ANY, " Parameter"))
371	sizer_title.Add((10, 10))
372	sizer_title.Add(wx.StaticText(self, wx.ID_ANY, " Add Constraint?"))
373	sizer_title.Add((10, 10))
374	sizer_title.Add(self.show_constraint)
375	sizer_title.Add(self.hide_constraint)
376	sizer_title.Add((10, 10))
377
378	self.btAdd = wx.Button(self, self.ID_ADD, 'Add')
379	self.btAdd.Bind(wx.EVT_BUTTON, self._on_add_constraint,
380	id=self.btAdd.GetId())
381	self.btAdd.SetToolTipString("Add another constraint?")
382	self.btAdd.Hide()
383
384	text_hint = wx.StaticText(self, wx.ID_ANY,
385	"Example: [M0][parameter] = M1.parameter")
386	sizer_button.Add(text_hint, 0,
387	wx.LEFT \| wx.EXPAND \| wx.ADJUST_MINSIZE, 10)
388	sizer_button.Add(self.btAdd, 0,
389	wx.LEFT \| wx.EXPAND \| wx.ADJUST_MINSIZE, 10)
390
391	box_sizer1.Add(sizer_title, flag=wx.TOP \| wx.BOTTOM, border=10)
392	box_sizer1.Add(self.sizer_all_constraints, flag=wx.TOP \| wx.BOTTOM,
393	border=10)
394	box_sizer1.Add(self.sizer_constraints, flag=wx.TOP \| wx.BOTTOM,
395	border=10)
396	box_sizer1.Add(sizer_button, flag=wx.TOP \| wx.BOTTOM, border=10)
397
398	self.constraints_sizer.Add(box_sizer1, 0, wx.EXPAND \| wx.ALL, 10)
399
400	def _fill_sizer_fit(self):
401	"""
402	Draw fit button
403	"""
404	self.run_fit_sizer.Clear(True)
405	box_description = wx.StaticBox(self, wx.ID_ANY, "Fit ")
406	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
407	sizer_button = wx.BoxSizer(wx.HORIZONTAL)
408
409	# Fit button
410	self.btFit = wx.Button(self, self.ID_FIT, 'Fit', size=wx.DefaultSize)
411	self.btFit.Bind(wx.EVT_BUTTON, self.on_fit, id=self.btFit.GetId())
412	self.btFit.SetToolTipString("Perform fit.")
413
414	# General Help button
415	self.btHelp = wx.Button(self, wx.ID_HELP, 'HELP')
416	if self.batch_on:
417	self.btHelp.SetToolTipString("Combined Batch Fitting help.")
418	else:
419	self.btHelp.SetToolTipString("Simultaneous/Constrained Fitting help.")
420	self.btHelp.Bind(wx.EVT_BUTTON, self._on_help)
421
422	# hint text on button line
423	if self.batch_on:
424	text = " Fit in Parallel all Data sets\n"
425	text += "and model selected."
426	else:
427	text = " At least one set of model and data\n"
428	text += " must be selected for fitting."
429	text_hint = wx.StaticText(self, wx.ID_ANY, text)
430
431	sizer_button.Add(text_hint)
432	sizer_button.Add(self.btFit, 0, wx.LEFT \| wx.ADJUST_MINSIZE, 10)
433	sizer_button.Add(self.btHelp, 0, wx.LEFT \| wx.ADJUST_MINSIZE, 10)
434
435	boxsizer1.Add(sizer_button, flag=wx.TOP \| wx.BOTTOM, border=10)
436	self.run_fit_sizer.Add(boxsizer1, 0, wx.EXPAND \| wx.ALL, 10)
437
438	def on_remove(self, event):
439	"""
440	Remove constraint fields
441	"""
442	if len(self.constraints_list) == 1:
443	self.hide_constraint.SetValue(True)
444	self._hide_constraint()
445	return
446	if len(self.constraints_list) == 0:
447	return
448	wx.CallAfter(self._remove_after, event.GetId())
449	# self._onAdd_constraint(None)
450
451	def _remove_after(self, id):
452	for item in self.constraints_list:
453	if id == item.btRemove.GetId():
454	self.sizer_constraints.Hide(item.sizer)
455	item.sizer.Clear(True)
456	self.sizer_constraints.Remove(item.sizer)
457	self.constraints_list.remove(item)
458	self.nb_constraint -= 1
459	self.constraints_sizer.Layout()
460	self.FitInside()
461	break
462
463	def on_fit(self, event):
464	"""
465	signal for fitting
466
467	"""
468	if self.fit_started:
469	self._stop_fit()
470	self.fit_started = False
471	return
472
473	flag = False
474	# check if the current page a simultaneous fit page or a batch page
475	if self == self._manager.sim_page:
476	flag = (self._manager.sim_page.uid == self.uid)
477
478	# making sure all parameters content a constraint
479	if not self.batch_on and self.show_constraint.GetValue():
480	if not self._set_constraint():
481	return
482	# model was actually selected from this page to be fit
483	if len(self.model_to_fit) >= 1:
484	self.manager._reset_schedule_problem(value=0)
485	for item in self.model_list:
486	if item[0].GetValue():
487	self.manager.schedule_for_fit(value=1, uid=item[2])
488	try:
489	self.fit_started = True
490	wx.CallAfter(self.set_fitbutton)
491	if not self.manager.onFit(uid=self.uid):
492	return
493	except:
494	msg = "Select at least one parameter to fit in the FitPages."
495	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
496	else:
497	msg = "Select at least one model check box to fit "
498	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
499	self.set_state()
500
501	def _on_fit_complete(self):
502	"""
503	Set the completion flag and display the updated fit button label.
504	"""
505	self.fit_started = False
506	self.set_fitbutton()
507
508	def _stop_fit(self, event=None):
509	"""
510	Attempt to stop the fitting thread
511
512	:param event: Event handler when stop fit is clicked
513	"""
514	if event is not None:
515	event.Skip()
516	self.manager.stop_fit(self.uid)
517	self.manager._reset_schedule_problem(value=0)
518	self._on_fit_complete()
519
520	def set_fitbutton(self):
521	"""
522	Set fit button label depending on the fit_started
523	"""
524	label = "Stop" if self.fit_started else "Fit"
525	color = "red" if self.fit_started else "black"
526
527	self.btFit.SetLabel(label)
528	self.btFit.SetForegroundColour(color)
529	self.btFit.Enable(True)
530
531	def _on_help(self, event):
532	"""
533	Bring up the simultaneous Fitting Documentation whenever the HELP
534	button is clicked.
535
536	Calls DocumentationWindow with the path of the location within the
537	documentation tree (after /doc/ ....". Note that when using old
538	versions of Wx (before 2.9) and thus not the release version of
539	installers, the help comes up at the top level of the file as
540	web browser does not pass anything past the # to the browser when it is
541	running "file:///...."
542
543	:param event: Triggers on clicking the help button
544	"""
545	_TreeLocation = "user/sasgui/perspectives/fitting/fitting_help.html"
546	if not self.batch_on:
547	_PageAnchor = "#simultaneous-fit-mode"
548	_doc_viewer = DocumentationWindow(self, self.ID_DOC, _TreeLocation,
549	_PageAnchor,
550	"Simultaneous/Constrained Fitting Help")
551	else:
552	_PageAnchor = "#combined-batch-fit-mode"
553	_doc_viewer = DocumentationWindow(self, self.ID_DOC, _TreeLocation,
554	_PageAnchor,
555	"Combined Batch Fit Help")
556
557	def set_manager(self, manager):
558	"""
559	set panel manager
560
561	:param manager: instance of plugin fitting
562	"""
563	self.manager = manager
564
565	def check_all_model_name(self, event=None):
566	"""
567	check all models names
568	"""
569	self.model_to_fit = []
570	if self.cb1.GetValue():
571	for item in self.model_list:
572	if item[0].IsEnabled():
573	item[0].SetValue(True)
574	self.model_to_fit.append(item)
575
576	# constraint info
577	self._store_model()
578	if not self.batch_on:
579	# display constraint fields
580	if (self.show_constraint.GetValue() and
581	len(self.constraints_list) == 0):
582	self._show_all_constraint()
583	self._show_constraint()
584	else:
585	for item in self.model_list:
586	item[0].SetValue(False)
587
588	if not self.batch_on:
589	# constraint info
590	self._hide_constraint()
591
592	self._update_easy_setup_cb()
593	self.FitInside()
594
595	def check_model_name(self, event):
596	"""
597	Save information related to checkbox and their states
598	"""
599	self.model_to_fit = []
600	for item in self.model_list:
601	if item[0].GetValue():
602	self.model_to_fit.append(item)
603	else:
604	if item in self.model_to_fit:
605	self.model_to_fit.remove(item)
606	self.cb1.SetValue(False)
607
608	# display constraint fields
609	if len(self.model_to_fit) >= 1:
610	self._store_model()
611	if not self.batch_on and self.show_constraint.GetValue() and\
612	len(self.constraints_list) == 0:
613	self._show_all_constraint()
614	self._show_constraint()
615
616	elif len(self.model_to_fit) < 1:
617	# constraint info
618	self._hide_constraint()
619
620	self._update_easy_setup_cb()
621	# set the value of the main check button
622	if len(self.model_list) == len(self.model_to_fit):
623	self.cb1.SetValue(True)
624	self.FitInside()
625	return
626	else:
627	self.cb1.SetValue(False)
628	self.FitInside()
629
630	def _update_easy_setup_cb(self):
631	"""
632	Update easy setup combobox on selecting a model
633	"""
634	if self.model_cbox_left is None or self.model_cbox_right is None:
635	return
636
637	models = [(item[3].name, item[3]) for item in self.model_to_fit]
638	setComboBoxItems(self.model_cbox_left, models)
639	setComboBoxItems(self.model_cbox_right, models)
640	for item in self.constraints_list:
641	setComboBoxItems(item[0], models)
642	if self.model_cbox_left.GetSelection() == wx.NOT_FOUND:
643	self.model_cbox_left.SetSelection(0)
644	self.constraints_sizer.Layout()
645
646	def _store_model(self):
647	"""
648	Store selected model
649	"""
650	if len(self.model_to_fit) < 1:
651	return
652	for item in self.model_to_fit:
653	model = item[3]
654	page_id = item[2]
655	self.constraint_dict[page_id] = model
656
657	def _display_constraint(self, event):
658	"""
659	Show fields to add constraint
660	"""
661	if len(self.model_to_fit) < 1:
662	msg = "Select at least 1 model to add constraint "
663	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
664	# hide button
665	self._hide_constraint()
666	return
667	if self.show_constraint.GetValue():
668	self._show_all_constraint()
669	self._show_constraint()
670	self.FitInside()
671	return
672	else:
673	self._hide_constraint()
674	return
675
676	def _show_all_constraint(self):
677	"""
678	Show constraint fields
679	"""
680	box_description = wx.StaticBox(self, wx.ID_ANY, "Easy Setup ")
681	box_sizer = wx.StaticBoxSizer(box_description, wx.HORIZONTAL)
682	sizer_constraint = wx.BoxSizer(wx.HORIZONTAL)
683	self.model_cbox_left = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY)
684	self.model_cbox_left.Clear()
685	self.model_cbox_right = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY)
686	self.model_cbox_right.Clear()
687	wx.EVT_COMBOBOX(self.model_cbox_left, wx.ID_ANY, self._on_select_modelcb)
688	wx.EVT_COMBOBOX(self.model_cbox_right, wx.ID_ANY, self._on_select_modelcb)
689	egal_txt = wx.StaticText(self, wx.ID_ANY, " = ")
690	self.set_button = wx.Button(self, self.ID_SET_ALL, 'Set All')
691	self.set_button.Bind(wx.EVT_BUTTON, self._on_set_all_equal,
692	id=self.set_button.GetId())
693	set_tip = "Add constraints for all the adjustable parameters "
694	set_tip += "(checked in FitPages) if exist."
695	self.set_button.SetToolTipString(set_tip)
696	self.set_button.Disable()
697
698	for id, model in self.constraint_dict.iteritems():
699	# check if all parameters have been selected for constraint
700	# then do not allow add constraint on parameters
701	self.model_cbox_left.Append(str(model.name), model)
702	self.model_cbox_left.Select(0)
703	for id, model in self.constraint_dict.iteritems():
704	# check if all parameters have been selected for constraint
705	# then do not allow add constraint on parameters
706	self.model_cbox_right.Append(str(model.name), model)
707	box_sizer.Add(self.model_cbox_left,
708	flag=wx.RIGHT \| wx.EXPAND, border=10)
709	# box_sizer.Add(wx.StaticText(self, wx.ID_ANY, ".parameters"),
710	# flag=wx.RIGHT \| wx.EXPAND, border=5)
711	box_sizer.Add(egal_txt, flag=wx.RIGHT \| wx.EXPAND, border=5)
712	box_sizer.Add(self.model_cbox_right,
713	flag=wx.RIGHT \| wx.EXPAND, border=10)
714	# box_sizer.Add(wx.StaticText(self, wx.ID_ANY, ".parameters"),
715	# flag=wx.RIGHT \| wx.EXPAND, border=5)
716	box_sizer.Add((20, -1))
717	box_sizer.Add(self.set_button, flag=wx.RIGHT \| wx.EXPAND, border=5)
718	sizer_constraint.Add(box_sizer, flag=wx.RIGHT \| wx.EXPAND, border=5)
719	self.sizer_all_constraints.Insert(before=0,
720	item=sizer_constraint,
721	flag=wx.TOP \| wx.BOTTOM \| wx.EXPAND, border=5)
722	self.FitInside()
723
724	def _on_select_modelcb(self, event):
725	"""
726	On select model left or right combobox
727	"""
728	event.Skip()
729	flag = True
730	if self.model_cbox_left.GetValue().strip() == '':
731	flag = False
732	if self.model_cbox_right.GetValue().strip() == '':
733	flag = False
734	if (self.model_cbox_left.GetValue() ==
735	self.model_cbox_right.GetValue()):
736	flag = False
737	self.set_button.Enable(flag)
738
739	def _on_set_all_equal(self, event):
740	"""
741	On set button
742	"""
743	event.Skip()
744	length = len(self.constraints_list)
745	if length < 1:
746	return
747	param_list = []
748	param_list_b = []
749	selection = self.model_cbox_left.GetCurrentSelection()
750	model_left = self.model_cbox_left.GetValue()
751	model = self.model_cbox_left.GetClientData(selection)
752	selection_b = self.model_cbox_right.GetCurrentSelection()
753	model_right = self.model_cbox_right.GetValue()
754	model_b = self.model_cbox_right.GetClientData(selection_b)
755	for id, dic_model in self.constraint_dict.iteritems():
756	if model == dic_model:
757	param_list = self.page_finder[id].get_param2fit()
758	if model_b == dic_model:
759	param_list_b = self.page_finder[id].get_param2fit()
760	if len(param_list) > 0 and len(param_list_b) > 0:
761	break
762	num_cbox = 0
763	has_param = False
764	for param in param_list:
765	num_cbox += 1
766	if param in param_list_b:
767	item = self.constraints_list[-1]
768	item.model_cbox.SetStringSelection(model_left)
769	self._on_select_model(None)
770	item.param_cbox.Clear()
771	item.param_cbox.Append(str(param), model)
772	item.param_cbox.SetStringSelection(str(param))
773	item.constraint.SetValue(str(model_right + "." + str(param)))
774	has_param = True
775	if num_cbox == (len(param_list) + 1):
776	break
777	self._show_constraint()
778
779	self.FitInside()
780	if not has_param:
781	msg = " There is no adjustable parameter (checked to fit)"
782	msg += " either one of the models."
783	wx.PostEvent(self.parent.parent, StatusEvent(info="warning",
784	status=msg))
785	else:
786	msg = " The constraints are added."
787	wx.PostEvent(self.parent.parent, StatusEvent(info="info",
788	status=msg))
789
790	def _show_constraint(self):
791	"""
792	Show constraint fields
793	:param dict: dictionary mapping constraint values
794	"""
795	self.btAdd.Show(True)
796	if len(self.constraints_list) != 0:
797	nb_fit_param = 0
798	for id, model in self.constraint_dict.iteritems():
799	nb_fit_param += len(self.page_finder[id].get_param2fit())
800	# Don't add anymore
801	if len(self.constraints_list) == nb_fit_param:
802	msg = "Cannot add another constraint. Maximum of number "
803	msg += "Parameters name reached %s" % str(nb_fit_param)
804	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
805	self.sizer_constraints.Layout()
806	self.constraints_sizer.Layout()
807	return
808	if len(self.model_to_fit) < 1:
809	msg = "Select at least 1 model to add constraint "
810	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
811	self.sizer_constraints.Layout()
812	self.constraints_sizer.Layout()
813	return
814
815	sizer_constraint = wx.BoxSizer(wx.HORIZONTAL)
816
817	# Model list
818	model_cbox = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY)
819	model_cbox.Clear()
820	for id, model in self.constraint_dict.iteritems():
821	# check if all parameters have been selected for constraint
822	# then do not allow add constraint on parameters
823	model_cbox.Append(str(model.name), model)
824	wx.EVT_COMBOBOX(model_cbox, wx.ID_ANY, self._on_select_model)
825
826	# Parameters in model
827	param_cbox = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY,
828	size=(100, -1))
829	param_cbox.Hide()
830	wx.EVT_COMBOBOX(param_cbox, wx.ID_ANY, self._on_select_param)
831
832	egal_txt = wx.StaticText(self, wx.ID_ANY, " = ")
833
834	# Parameter constraint
835	constraint = wx.TextCtrl(self, wx.ID_ANY)
836
837	# Remove button
838	#btRemove = wx.Button(self, self.ID_REMOVE, 'Remove')
839	bt_remove = wx.Button(self, self._ids.next(), 'Remove')
840	bt_remove.Bind(wx.EVT_BUTTON, self.on_remove,
841	id=bt_remove.GetId())
842	bt_remove.SetToolTipString("Remove constraint.")
843	bt_remove.Hide()
844
845	# Hid the add button, if it exists
846	if hasattr(self, "btAdd"):
847	self.btAdd.Hide()
848
849	sizer_constraint.Add((5, -1))
850	sizer_constraint.Add(model_cbox, flag=wx.RIGHT \| wx.EXPAND, border=10)
851	sizer_constraint.Add(param_cbox, flag=wx.RIGHT \| wx.EXPAND, border=5)
852	sizer_constraint.Add(egal_txt, flag=wx.RIGHT \| wx.EXPAND, border=5)
853	sizer_constraint.Add(constraint, flag=wx.RIGHT \| wx.EXPAND, border=10)
854	sizer_constraint.Add(bt_remove, flag=wx.RIGHT \| wx.EXPAND, border=10)
855
856	self.sizer_constraints.Insert(before=self.nb_constraint,
857	item=sizer_constraint, flag=wx.TOP \| wx.BOTTOM \| wx.EXPAND,
858	border=5)
859	c = ConstraintLine(model_cbox, param_cbox, egal_txt,
860	constraint, bt_remove, sizer_constraint)
861	self.constraints_list.append(c)
862
863	self.nb_constraint += 1
864	self.sizer_constraints.Layout()
865	self.constraints_sizer.Layout()
866	self.Layout()
867
868	def _hide_constraint(self):
869	"""
870	hide buttons related constraint
871	"""
872	for id in self.page_finder.iterkeys():
873	self.page_finder[id].clear_model_param()
874
875	self.nb_constraint = 0
876	self.constraint_dict = {}
877	if hasattr(self, "btAdd"):
878	self.btAdd.Hide()
879	self._store_model()
880	if self.model_cbox_left is not None:
881	self.model_cbox_left.Clear()
882	self.model_cbox_left = None
883	if self.model_cbox_right is not None:
884	self.model_cbox_right.Clear()
885	self.model_cbox_right = None
886	self.constraints_list = []
887	self.sizer_all_constraints.Clear(True)
888	self.sizer_all_constraints.Layout()
889	self.sizer_constraints.Clear(True)
890	self.sizer_constraints.Layout()
891	self.constraints_sizer.Layout()
892	self.Layout()
893	self.FitInside()
894
895	def _on_select_model(self, event):
896	"""
897	fill combo box with list of parameters
898	"""
899	if not self.constraints_list:
900	return
901
902	# This way PC/MAC both work, instead of using event.GetClientData().
903	model_cbox = self.constraints_list[-1].model_cbox
904	n = model_cbox.GetCurrentSelection()
905	if n == wx.NOT_FOUND:
906	return
907
908	model = model_cbox.GetClientData(n)
909	param_list = []
910	for id, dic_model in self.constraint_dict.iteritems():
911	if model == dic_model:
912	param_list = self.page_finder[id].get_param2fit()
913	break
914
915	param_cbox = self.constraints_list[-1].param_cbox
916	param_cbox.Clear()
917	# insert only fittable paramaters
918	for param in param_list:
919	param_cbox.Append(str(param), model)
920	param_cbox.Show(True)
921
922	bt_remove = self.constraints_list[-1].btRemove
923	bt_remove.Show(True)
924	self.btAdd.Show(True)
925	# self.Layout()
926	self.FitInside()
927
928	def _on_select_param(self, event):
929	"""
930	Store the appropriate constraint in the page_finder
931	"""
932	# This way PC/MAC both work, instead of using event.GetClientData().
933	# n = self.param_cbox.GetCurrentSelection()
934	# model = self.param_cbox.GetClientData(n)
935	# param = event.GetString()
936
937	if self.constraints_list:
938	self.constraints_list[-1].egal_txt.Show(True)
939	self.constraints_list[-1].constraint.Show(True)
940
941	def _on_add_constraint(self, event):
942	"""
943	Add another line for constraint
944	"""
945	if not self.show_constraint.GetValue():
946	msg = " Select Yes to add Constraint "
947	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
948	return
949	# check that a constraint is added
950	# before allow to add another constraint
951	for item in self.constraints_list:
952	if item.model_cbox.GetString(0) == "":
953	msg = " Select a model Name! "
954	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
955	return
956	if item.param_cbox.GetString(0) == "":
957	msg = " Select a parameter Name! "
958	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
959	return
960	if item.constraint.GetValue().lstrip().rstrip() == "":
961	model = item.param_cbox.GetClientData(
962	item.param_cbox.GetCurrentSelection())
963	if model is not None:
964	msg = " Enter a constraint for %s.%s! " % (model.name,
965	item.param_cbox.GetString(0))
966	else:
967	msg = " Enter a constraint"
968	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
969	return
970	# some model or parameters can be constrained
971	self._show_constraint()
972	self.FitInside()
973
974	def _set_constraint(self):
975	"""
976	get values from the constraint textcrtl ,parses them into model name
977	parameter name and parameters values.
978	store them in a list self.params .when when params is not empty
979	set_model uses it to reset the appropriate model
980	and its appropriates parameters
981	"""
982	for item in self.constraints_list:
983	select0 = item.model_cbox.GetSelection()
984	if select0 == wx.NOT_FOUND:
985	continue
986	model = item.model_cbox.GetClientData(select0)
987	select1 = item.param_cbox.GetSelection()
988	if select1 == wx.NOT_FOUND:
989	continue
990	param = item.param_cbox.GetString(select1)
991	constraint = item.constraint.GetValue().lstrip().rstrip()
992	if param.lstrip().rstrip() == "":
993	param = None
994	msg = " Constraint will be ignored!. missing parameters"
995	msg += " in combobox to set constraint! "
996	wx.PostEvent(self.parent.parent, StatusEvent(status=msg))
997	for id, value in self.constraint_dict.iteritems():
998	if model == value:
999	if constraint == "":
1000	msg = " Constraint will be ignored!. missing value"
1001	msg += " in textcrtl to set constraint! "
1002	wx.PostEvent(self.parent.parent,
1003	StatusEvent(status=msg))
1004	constraint = None
1005	if str(param) in self.page_finder[id].get_param2fit():
1006	msg = " Checking constraint for parameter: %s ", param
1007	wx.PostEvent(self.parent.parent,
1008	StatusEvent(info="info", status=msg))
1009	else:
1010	model_name = item[0].GetLabel()
1011	fitpage = self.page_finder[id].get_fit_tab_caption()
1012	msg = "All constrainted parameters must be set "
1013	msg += " adjustable: '%s.%s' " % (model_name, param)
1014	msg += "is NOT checked in '%s'. " % fitpage
1015	msg += " Please check it to fit or"
1016	msg += " remove the line of the constraint."
1017	wx.PostEvent(self.parent.parent,
1018	StatusEvent(info="error", status=msg))
1019	return False
1020
1021	for fid in self.page_finder[id].iterkeys():
1022	# wrap in param/constraint in str() to remove unicode
1023	self.page_finder[id].set_model_param(str(param),
1024	str(constraint), fid=fid)
1025	break
1026	return True
1027
1028	def on_set_focus(self, event=None):
1029	"""
1030	The derivative class is on focus if implemented
1031	"""
1032	if self.parent is not None:
1033	if self.parent.parent is not None:
1034	wx.PostEvent(self.parent.parent, PanelOnFocusEvent(panel=self))
1035	self.page_finder = self.parent._manager.get_page_finder()
1036
1037
1038	def setComboBoxItems(cbox, items):
1039	assert isinstance(cbox, wx.ComboBox)
1040	selected = cbox.GetStringSelection()
1041	cbox.Clear()
1042	for k, (name, value) in enumerate(items):
1043	cbox.Append(name, value)
1044	cbox.SetStringSelection(selected)
1045
1046
1047	class SimFitPageState:
1048	"""
1049	State of the simultaneous fit page for saving purposes
1050	"""
1051
1052	def __init__(self):
1053	# Sim Fit Page Number
1054	self.fit_page_no = None
1055	# Select all data
1056	self.select_all = False
1057	# Data sets sent to fit page
1058	self.model_list = []
1059	# Data sets to be fit
1060	self.model_to_fit = []
1061	# Number of constraints
1062	self.no_constraint = 0
1063	# Dictionary of constraints
1064	self.constraint_dict = {}
1065	# List of constraints
1066	self.constraints_list = []
1067
1068	def load_from_save_state(self, fit):
1069	"""
1070	Load in a simultaneous/constrained fit from a save state
1071	:param fit: Fitpanel object
1072	:return: None
1073	"""
1074
1075	model_map = {}
1076	if fit.fit_panel.sim_page is None:
1077	fit.fit_panel.add_sim_page()
1078	sim_page = fit.fit_panel.sim_page
1079
1080	# Process each model and associate old M# with new M#
1081	i = 0
1082	for model in sim_page.model_list:
1083	model_id = self._format_id(model[1].keys()[0])
1084	for saved_model in self.model_list:
1085	save_id = saved_model.pop('name')
1086	saved_model['name'] = save_id
1087	save_id = self._format_id(save_id)
1088	if save_id == model_id:
1089	model_map[saved_model.pop('fit_page_source')] = \
1090	model[3].name
1091	check = bool(saved_model.pop('checked'))
1092	sim_page.model_list[i][0].SetValue(check)
1093	break
1094	i += 1
1095	sim_page.check_model_name(None)
1096
1097	if len(self.constraints_list) > 0:
1098	sim_page.hide_constraint.SetValue(False)
1099	sim_page.show_constraint.SetValue(True)
1100	sim_page._display_constraint(None)
1101
1102	for index, item in enumerate(self.constraints_list):
1103	model_cbox = item.pop('model_cbox')
1104	if model_cbox != "":
1105	constraint_value = item.pop('constraint')
1106	param = item.pop('param_cbox')
1107	equality = item.pop('egal_txt')
1108	for key, value in model_map.iteritems():
1109	model_cbox.replace(key, value)
1110	constraint_value.replace(key, value)
1111
1112	sim_page.constraints_list[index][0].SetValue(model_cbox)
1113	sim_page._on_select_model(None)
1114	sim_page.constraints_list[index][1].SetValue(param)
1115	sim_page.constraints_list[index][2].SetLabel(equality)
1116	sim_page.constraints_list[index][3].SetValue(constraint_value)
1117	sim_page._on_add_constraint(None)
1118	sim_page._manager.sim_page = sim_page
1119
1120	def _format_id(self, original_id):
1121	original_id = original_id.rstrip('1234567890.')
1122	new_id_list = original_id.split()
1123	new_id = ' '.join(new_id_list)
1124	return new_id

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/src/sas/sasgui/perspectives/fitting/simfitpage.py @ 2a399ca

Download in other formats: