| 1 | """ |
|---|
| 2 | Simultaneous or Batch fit page |
|---|
| 3 | """ |
|---|
| 4 | # Note that this is used for both Simultaneous/Constrained fit AND for |
|---|
| 5 | # combined batch fit. This is done through setting of the batch_on parameter. |
|---|
| 6 | # There are the a half dozen or so places where an if statement is used as in |
|---|
| 7 | # if not batch_on: |
|---|
| 8 | # xxxx |
|---|
| 9 | # else: |
|---|
| 10 | # xxxx |
|---|
| 11 | # This is just wrong but dont have time to fix this go. Proper approach would be |
|---|
| 12 | # to strip all parts of the code that depend on batch_on and create the top |
|---|
| 13 | # level class from which a contrained/simultaneous fit page and a combined |
|---|
| 14 | # batch page inherit. |
|---|
| 15 | # |
|---|
| 16 | # 04/09/2017 --PDB |
|---|
| 17 | |
|---|
| 18 | import sys |
|---|
| 19 | from collections import namedtuple |
|---|
| 20 | |
|---|
| 21 | import wx |
|---|
| 22 | import wx.lib.newevent |
|---|
| 23 | from wx.lib.scrolledpanel import ScrolledPanel |
|---|
| 24 | |
|---|
| 25 | from sas.sascalc.fit.pagestate import SimFitPageState |
|---|
| 26 | from sas.sasgui.guiframe.events import StatusEvent, PanelOnFocusEvent |
|---|
| 27 | from sas.sasgui.guiframe.panel_base import PanelBase |
|---|
| 28 | from sas.sasgui.guiframe.utils import IdList |
|---|
| 29 | from sas.sasgui.guiframe.documentation_window import DocumentationWindow |
|---|
| 30 | |
|---|
| 31 | # Control panel width |
|---|
| 32 | if sys.platform.count("darwin") == 0: |
|---|
| 33 | PANEL_WID = 420 |
|---|
| 34 | FONT_VARIANT = 0 |
|---|
| 35 | else: |
|---|
| 36 | PANEL_WID = 490 |
|---|
| 37 | FONT_VARIANT = 1 |
|---|
| 38 | |
|---|
| 39 | |
|---|
| 40 | # Each constraint requires five widgets and sizer. Package them in |
|---|
| 41 | # a named tuple for easy access. |
|---|
| 42 | ConstraintLine = namedtuple('ConstraintLine', |
|---|
| 43 | 'model_cbox param_cbox egal_txt constraint btRemove sizer') |
|---|
| 44 | |
|---|
| 45 | |
|---|
| 46 | def get_fittableParam(model): |
|---|
| 47 | """ |
|---|
| 48 | return list of fittable parameters from a model |
|---|
| 49 | |
|---|
| 50 | :param model: the model used |
|---|
| 51 | |
|---|
| 52 | """ |
|---|
| 53 | fittable_param = [] |
|---|
| 54 | for item in model.getParamList(): |
|---|
| 55 | if not item in model.getDispParamList(): |
|---|
| 56 | if not item in model.non_fittable: |
|---|
| 57 | fittable_param.append(item) |
|---|
| 58 | |
|---|
| 59 | for item in model.fixed: |
|---|
| 60 | fittable_param.append(item) |
|---|
| 61 | |
|---|
| 62 | return fittable_param |
|---|
| 63 | |
|---|
| 64 | class SimultaneousFitPage(ScrolledPanel, PanelBase): |
|---|
| 65 | """ |
|---|
| 66 | Simultaneous fitting panel |
|---|
| 67 | All that needs to be defined are the |
|---|
| 68 | two data members window_name and window_caption |
|---|
| 69 | """ |
|---|
| 70 | # Internal name for the AUI manager |
|---|
| 71 | window_name = "Simultaneous Fit Page" |
|---|
| 72 | # Title to appear on top of the window |
|---|
| 73 | window_caption = "Simultaneous Fit Page" |
|---|
| 74 | ID_DOC = wx.NewId() |
|---|
| 75 | ID_SET_ALL = wx.NewId() |
|---|
| 76 | ID_FIT = wx.NewId() |
|---|
| 77 | ID_ADD = wx.NewId() |
|---|
| 78 | _id_pool = IdList() |
|---|
| 79 | |
|---|
| 80 | def __init__(self, parent, page_finder={}, id=wx.ID_ANY, batch_on=False, |
|---|
| 81 | *args, **kwargs): |
|---|
| 82 | ScrolledPanel.__init__(self, parent, id=id, |
|---|
| 83 | style=wx.FULL_REPAINT_ON_RESIZE, |
|---|
| 84 | *args, **kwargs) |
|---|
| 85 | PanelBase.__init__(self, parent) |
|---|
| 86 | """ |
|---|
| 87 | Simultaneous page display |
|---|
| 88 | """ |
|---|
| 89 | self._ids = iter(self._id_pool) |
|---|
| 90 | self.SetupScrolling() |
|---|
| 91 | # Font size |
|---|
| 92 | self.SetWindowVariant(variant=FONT_VARIANT) |
|---|
| 93 | self.uid = wx.NewId() |
|---|
| 94 | self.parent = parent |
|---|
| 95 | self.batch_on = batch_on |
|---|
| 96 | # store page_finder |
|---|
| 97 | self.page_finder = page_finder |
|---|
| 98 | # list containing info to set constraint |
|---|
| 99 | # look like self.constraint_dict[page_id]= page |
|---|
| 100 | self.constraint_dict = {} |
|---|
| 101 | # item list |
|---|
| 102 | # self.constraints_list=[combobox1, combobox2,=,textcrtl, button ] |
|---|
| 103 | self.constraints_list = [] |
|---|
| 104 | # list of current model |
|---|
| 105 | self.model_list = [] |
|---|
| 106 | # selected model to fit |
|---|
| 107 | self.model_to_fit = [] |
|---|
| 108 | # Control the fit state |
|---|
| 109 | self.fit_started = False |
|---|
| 110 | # number of constraint |
|---|
| 111 | self.nb_constraint = 0 |
|---|
| 112 | self.state = SimFitPageState() |
|---|
| 113 | self.model_cbox_left = None |
|---|
| 114 | self.model_cbox_right = None |
|---|
| 115 | # draw page |
|---|
| 116 | self.define_page_structure() |
|---|
| 117 | self.draw_page() |
|---|
| 118 | self._set_save_flag(False) |
|---|
| 119 | |
|---|
| 120 | def define_page_structure(self): |
|---|
| 121 | """ |
|---|
| 122 | Create empty sizers, their hierarchy and set the sizer for the panel |
|---|
| 123 | """ |
|---|
| 124 | self.vbox = wx.BoxSizer(wx.VERTICAL) |
|---|
| 125 | self.data_selection_sizer = wx.BoxSizer(wx.VERTICAL) |
|---|
| 126 | self.constraints_sizer = wx.BoxSizer(wx.VERTICAL) |
|---|
| 127 | self.run_fit_sizer = wx.BoxSizer(wx.VERTICAL) |
|---|
| 128 | |
|---|
| 129 | self.data_selection_sizer.SetMinSize((PANEL_WID, -1)) |
|---|
| 130 | self.constraints_sizer.SetMinSize((PANEL_WID, -1)) |
|---|
| 131 | self.run_fit_sizer.SetMinSize((PANEL_WID, -1)) |
|---|
| 132 | self.vbox.Add(self.data_selection_sizer) |
|---|
| 133 | self.vbox.Add(self.constraints_sizer) |
|---|
| 134 | self.vbox.Add(self.run_fit_sizer) |
|---|
| 135 | self.SetSizer(self.vbox) |
|---|
| 136 | self.Centre() |
|---|
| 137 | |
|---|
| 138 | def set_state(self): |
|---|
| 139 | """ |
|---|
| 140 | Define a set of state parameters for saving simultaneous fits. |
|---|
| 141 | """ |
|---|
| 142 | self._set_constraint() |
|---|
| 143 | self.state.fit_page_no = self.uid |
|---|
| 144 | self.state.select_all = self.cb1.GetValue() |
|---|
| 145 | self.state.model_list = self.model_list |
|---|
| 146 | self.state.model_to_fit = self.model_to_fit |
|---|
| 147 | self.state.no_constraint = self.nb_constraint |
|---|
| 148 | self.state.constraint_dict = self.constraint_dict |
|---|
| 149 | self.state.constraints_list = self.constraints_list |
|---|
| 150 | return self.get_state() |
|---|
| 151 | |
|---|
| 152 | def get_state(self): |
|---|
| 153 | """ |
|---|
| 154 | Return the state of the current page |
|---|
| 155 | :return: self.state |
|---|
| 156 | """ |
|---|
| 157 | return self.state |
|---|
| 158 | |
|---|
| 159 | def load_from_save_state(self, sim_state): |
|---|
| 160 | """ |
|---|
| 161 | Load in a simultaneous/constrained fit from a save state |
|---|
| 162 | :param fit: Fitpanel object |
|---|
| 163 | :return: None |
|---|
| 164 | """ |
|---|
| 165 | init_map = {} |
|---|
| 166 | final_map = {} |
|---|
| 167 | # Process each model and associate old M# with new M# |
|---|
| 168 | i = 0 |
|---|
| 169 | for model in self.model_list: |
|---|
| 170 | model_id = self._format_id(model[1].keys()[0]) |
|---|
| 171 | for saved_model in sim_state.model_list: |
|---|
| 172 | save_id = saved_model.pop('name') |
|---|
| 173 | saved_model['name'] = save_id |
|---|
| 174 | save_id = self._format_id(save_id) |
|---|
| 175 | if save_id == model_id: |
|---|
| 176 | model_map[saved_model.pop('fit_page_source')] = \ |
|---|
| 177 | model[3].name |
|---|
| 178 | check = bool(saved_model.pop('checked')) |
|---|
| 179 | self.model_list[i][0].SetValue(check) |
|---|
| 180 | inter_id = str(i)*5 |
|---|
| 181 | init_map[saved_model.pop('fit_page_source')] = inter_id |
|---|
| 182 | final_map[inter_id] = model[3].name |
|---|
| 183 | check = bool(saved_model.pop('checked')) |
|---|
| 184 | self.model_list[i][0].SetValue(check) |
|---|
| 185 | break |
|---|
| 186 | i += 1 |
|---|
| 187 | |
|---|
| 188 | self.check_model_name(None) |
|---|
| 189 | |
|---|
| 190 | if len(sim_state.constraints_list) > 0: |
|---|
| 191 | self.hide_constraint.SetValue(False) |
|---|
| 192 | self.show_constraint.SetValue(True) |
|---|
| 193 | self._display_constraint(None) |
|---|
| 194 | |
|---|
| 195 | for index, item in enumerate(sim_state.constraints_list): |
|---|
| 196 | model_cbox = item.pop('model_cbox') |
|---|
| 197 | if model_cbox != "": |
|---|
| 198 | constraint_value = item.pop('constraint') |
|---|
| 199 | param = item.pop('param_cbox') |
|---|
| 200 | equality = item.pop('egal_txt') |
|---|
| 201 | for key, value in init_map.items(): |
|---|
| 202 | model_cbox = model_cbox.replace(key, value) |
|---|
| 203 | constraint_value = constraint_value.replace(key, value) |
|---|
| 204 | for key, value in final_map.items(): |
|---|
| 205 | model_cbox = model_cbox.replace(key, value) |
|---|
| 206 | constraint_value = constraint_value.replace(key, value) |
|---|
| 207 | |
|---|
| 208 | self.constraints_list[index][0].SetValue(model_cbox) |
|---|
| 209 | self._on_select_model(None) |
|---|
| 210 | self.constraints_list[index][1].SetValue(param) |
|---|
| 211 | self.constraints_list[index][2].SetLabel(equality) |
|---|
| 212 | self.constraints_list[index][3].SetValue(constraint_value) |
|---|
| 213 | self._on_add_constraint(None) |
|---|
| 214 | self._manager.sim_page = self |
|---|
| 215 | |
|---|
| 216 | def _format_id(self, original_id): |
|---|
| 217 | original_id = original_id.rstrip('1234567890.') |
|---|
| 218 | new_id_list = original_id.split() |
|---|
| 219 | new_id = ' '.join(new_id_list) |
|---|
| 220 | return new_id |
|---|
| 221 | |
|---|
| 222 | |
|---|
| 223 | |
|---|
| 224 | def draw_page(self): |
|---|
| 225 | """ |
|---|
| 226 | Construct the Simultaneous/Constrained fit page. fills the first |
|---|
| 227 | region (sizer1) with the list of available fit page pairs of data |
|---|
| 228 | and models. Then fills sizer2 with the checkbox for adding |
|---|
| 229 | constraints, and finally fills sizer3 with the fit button and |
|---|
| 230 | instructions. |
|---|
| 231 | """ |
|---|
| 232 | |
|---|
| 233 | # create blank list of constraints |
|---|
| 234 | self.model_list = [] |
|---|
| 235 | self.model_to_fit = [] |
|---|
| 236 | self.constraints_list = [] |
|---|
| 237 | self.constraint_dict = {} |
|---|
| 238 | self.nb_constraint = 0 |
|---|
| 239 | self.model_cbox_left = None |
|---|
| 240 | self.model_cbox_right = None |
|---|
| 241 | |
|---|
| 242 | if len(self.model_list) > 0: |
|---|
| 243 | for item in self.model_list: |
|---|
| 244 | item[0].SetValue(False) |
|---|
| 245 | self.manager.schedule_for_fit(value=0, uid=item[2]) |
|---|
| 246 | |
|---|
| 247 | #------------------------------------------------------- |
|---|
| 248 | # setup sizer1 (which fitpages to include) |
|---|
| 249 | self.data_selection_sizer.Clear(True) |
|---|
| 250 | box_description = wx.StaticBox(self, wx.ID_ANY, "Fit Combinations") |
|---|
| 251 | boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL) |
|---|
| 252 | sizer_title = wx.BoxSizer(wx.HORIZONTAL) |
|---|
| 253 | sizer_couples = wx.GridBagSizer(5, 5) |
|---|
| 254 | |
|---|
| 255 | # The wx GUI has a flag to enable a menu item, but can still be |
|---|
| 256 | # reached via scripting. There is no guearantee future GUI |
|---|
| 257 | # implementations force this check, either. |
|---|
| 258 | # IMHO, this if statement should stay -- JRK 2016-OCT-05 |
|---|
| 259 | if len(self.page_finder) == 0: |
|---|
| 260 | msg = " No fit combinations are found! \n\n" |
|---|
| 261 | msg += " Please load data and set up " |
|---|
| 262 | msg += "at least one fit panels first..." |
|---|
| 263 | sizer_title.Add(wx.StaticText(self, wx.ID_ANY, msg)) |
|---|
| 264 | else: |
|---|
| 265 | # store model |
|---|
| 266 | self._store_model() |
|---|
| 267 | |
|---|
| 268 | self.cb1 = wx.CheckBox(self, wx.ID_ANY, 'Select all') |
|---|
| 269 | self.cb1.SetValue(False) |
|---|
| 270 | wx.EVT_CHECKBOX(self, self.cb1.GetId(), self.check_all_model_name) |
|---|
| 271 | |
|---|
| 272 | sizer_title.Add((10, 10), 0, |
|---|
| 273 | wx.TOP | wx.BOTTOM | wx.EXPAND | wx.ADJUST_MINSIZE, border=5) |
|---|
| 274 | sizer_title.Add(self.cb1, 0, |
|---|
| 275 | wx.TOP | wx.BOTTOM | wx.LEFT | wx.EXPAND | wx.ADJUST_MINSIZE, |
|---|
| 276 | border=5) |
|---|
| 277 | |
|---|
| 278 | # draw list of model and data names |
|---|
| 279 | self._fill_sizer_model_list(sizer_couples) |
|---|
| 280 | |
|---|
| 281 | boxsizer1.Add(sizer_title, flag=wx.TOP | wx.BOTTOM, border=5) |
|---|
| 282 | boxsizer1.Add(sizer_couples, 1, flag=wx.TOP | wx.BOTTOM, border=5) |
|---|
| 283 | self.data_selection_sizer.Add(boxsizer1, 1, wx.EXPAND | wx.ALL, 10) |
|---|
| 284 | # self.sizer1.Layout() |
|---|
| 285 | |
|---|
| 286 | #-------------------------------------------------------- |
|---|
| 287 | # set up the other 2 sizers: the constraints list and the |
|---|
| 288 | # buttons (fit, help etc) sizer at the bottom of the page. |
|---|
| 289 | # Note: the if statement should be removed along with the above |
|---|
| 290 | # if statement as soon as it can be properly tested. |
|---|
| 291 | # Nov. 22 2015 --PDB |
|---|
| 292 | # As above, this page can be accessed through other means than the |
|---|
| 293 | # base SasView GUI. |
|---|
| 294 | # Oct. 5, 2016 --JRK |
|---|
| 295 | if len(self.page_finder) > 0: |
|---|
| 296 | # draw the sizer containing constraint info |
|---|
| 297 | if not self.batch_on: |
|---|
| 298 | self._fill_sizer_constraint() |
|---|
| 299 | # draw fit button sizer |
|---|
| 300 | self._fill_sizer_fit() |
|---|
| 301 | |
|---|
| 302 | def _fill_sizer_model_list(self, sizer): |
|---|
| 303 | """ |
|---|
| 304 | Receive a dictionary containing information to display model name |
|---|
| 305 | """ |
|---|
| 306 | ix = 0 |
|---|
| 307 | iy = 0 |
|---|
| 308 | sizer.Clear(True) |
|---|
| 309 | |
|---|
| 310 | new_name = wx.StaticText(self, wx.ID_ANY, ' Model Title ', |
|---|
| 311 | style=wx.ALIGN_CENTER) |
|---|
| 312 | new_name.SetBackgroundColour('orange') |
|---|
| 313 | new_name.SetForegroundColour(wx.WHITE) |
|---|
| 314 | sizer.Add(new_name, (iy, ix), (1, 1), |
|---|
| 315 | wx.LEFT | wx.EXPAND | wx.ADJUST_MINSIZE, 15) |
|---|
| 316 | ix += 2 |
|---|
| 317 | model_type = wx.StaticText(self, wx.ID_ANY, ' Model ') |
|---|
| 318 | model_type.SetBackgroundColour('grey') |
|---|
| 319 | model_type.SetForegroundColour(wx.WHITE) |
|---|
| 320 | sizer.Add(model_type, (iy, ix), (1, 1), |
|---|
| 321 | wx.EXPAND | wx.ADJUST_MINSIZE, 0) |
|---|
| 322 | ix += 1 |
|---|
| 323 | data_used = wx.StaticText(self, wx.ID_ANY, ' Data ') |
|---|
| 324 | data_used.SetBackgroundColour('grey') |
|---|
| 325 | data_used.SetForegroundColour(wx.WHITE) |
|---|
| 326 | sizer.Add(data_used, (iy, ix), (1, 1), |
|---|
| 327 | wx.EXPAND | wx.ADJUST_MINSIZE, 0) |
|---|
| 328 | ix += 1 |
|---|
| 329 | tab_used = wx.StaticText(self, wx.ID_ANY, ' FitPage ') |
|---|
| 330 | tab_used.SetBackgroundColour('grey') |
|---|
| 331 | tab_used.SetForegroundColour(wx.WHITE) |
|---|
| 332 | sizer.Add(tab_used, (iy, ix), (1, 1), |
|---|
| 333 | wx.EXPAND | wx.ADJUST_MINSIZE, 0) |
|---|
| 334 | for id, value in self.page_finder.iteritems(): |
|---|
| 335 | if id not in self.parent.opened_pages: |
|---|
| 336 | continue |
|---|
| 337 | |
|---|
| 338 | if self.batch_on != self.parent.get_page_by_id(id).batch_on: |
|---|
| 339 | continue |
|---|
| 340 | |
|---|
| 341 | data_list = [] |
|---|
| 342 | model_list = [] |
|---|
| 343 | # get data name and model objetta |
|---|
| 344 | for fitproblem in value.get_fit_problem(): |
|---|
| 345 | |
|---|
| 346 | data = fitproblem.get_fit_data() |
|---|
| 347 | if not data.is_data: |
|---|
| 348 | continue |
|---|
| 349 | name = '-' |
|---|
| 350 | if data is not None and data.is_data: |
|---|
| 351 | name = str(data.name) |
|---|
| 352 | data_list.append(name) |
|---|
| 353 | |
|---|
| 354 | model = fitproblem.get_model() |
|---|
| 355 | if model is None: |
|---|
| 356 | continue |
|---|
| 357 | model_list.append(model) |
|---|
| 358 | |
|---|
| 359 | if len(model_list) == 0: |
|---|
| 360 | continue |
|---|
| 361 | # Draw sizer |
|---|
| 362 | ix = 0 |
|---|
| 363 | iy += 1 |
|---|
| 364 | model = model_list[0] |
|---|
| 365 | name = '_' |
|---|
| 366 | if model is not None: |
|---|
| 367 | name = str(model.name) |
|---|
| 368 | cb = wx.CheckBox(self, wx.ID_ANY, name) |
|---|
| 369 | cb.SetValue(False) |
|---|
| 370 | cb.Enable(model is not None and data.is_data) |
|---|
| 371 | sizer.Add(cb, (iy, ix), (1, 1), |
|---|
| 372 | wx.LEFT | wx.EXPAND | wx.ADJUST_MINSIZE, 15) |
|---|
| 373 | wx.EVT_CHECKBOX(self, cb.GetId(), self.check_model_name) |
|---|
| 374 | ix += 2 |
|---|
| 375 | model_type = wx.StaticText(self, wx.ID_ANY, |
|---|
| 376 | model.__class__.__name__) |
|---|
| 377 | sizer.Add(model_type, (iy, ix), (1, 1), |
|---|
| 378 | wx.EXPAND | wx.ADJUST_MINSIZE, 0) |
|---|
| 379 | if self.batch_on: |
|---|
| 380 | data_used = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY) |
|---|
| 381 | data_used.AppendItems(data_list) |
|---|
| 382 | data_used.SetSelection(0) |
|---|
| 383 | else: |
|---|
| 384 | data_used = wx.StaticText(self, wx.ID_ANY, data_list[0]) |
|---|
| 385 | |
|---|
| 386 | ix += 1 |
|---|
| 387 | sizer.Add(data_used, (iy, ix), (1, 1), |
|---|
| 388 | wx.EXPAND | wx.ADJUST_MINSIZE, 0) |
|---|
| 389 | ix += 1 |
|---|
| 390 | caption = value.get_fit_tab_caption() |
|---|
| 391 | tab_caption_used = wx.StaticText(self, wx.ID_ANY, str(caption)) |
|---|
| 392 | sizer.Add(tab_caption_used, (iy, ix), (1, 1), |
|---|
| 393 | wx.EXPAND | wx.ADJUST_MINSIZE, 0) |
|---|
| 394 | |
|---|
| 395 | self.model_list.append([cb, value, id, model]) |
|---|
| 396 | |
|---|
| 397 | iy += 1 |
|---|
| 398 | sizer.Add((20, 20), (iy, ix), (1, 1), |
|---|
| 399 | wx.LEFT | wx.EXPAND | wx.ADJUST_MINSIZE, 15) |
|---|
| 400 | |
|---|
| 401 | def _fill_sizer_constraint(self): |
|---|
| 402 | """ |
|---|
| 403 | Fill sizer containing constraint info |
|---|
| 404 | """ |
|---|
| 405 | msg = "Select at least 1 model to add constraint " |
|---|
| 406 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 407 | |
|---|
| 408 | self.constraints_sizer.Clear(True) |
|---|
| 409 | if self.batch_on: |
|---|
| 410 | if self.constraints_sizer.IsShown(): |
|---|
| 411 | self.constraints_sizer.Show(False) |
|---|
| 412 | return |
|---|
| 413 | box_description = wx.StaticBox(self, wx.ID_ANY, "Fit Constraints") |
|---|
| 414 | box_sizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL) |
|---|
| 415 | sizer_title = wx.BoxSizer(wx.HORIZONTAL) |
|---|
| 416 | self.sizer_all_constraints = wx.BoxSizer(wx.HORIZONTAL) |
|---|
| 417 | self.sizer_constraints = wx.BoxSizer(wx.VERTICAL) |
|---|
| 418 | sizer_button = wx.BoxSizer(wx.HORIZONTAL) |
|---|
| 419 | |
|---|
| 420 | self.hide_constraint = wx.RadioButton(self, wx.ID_ANY, 'No', (10, 10), |
|---|
| 421 | style=wx.RB_GROUP) |
|---|
| 422 | self.show_constraint = wx.RadioButton(self, wx.ID_ANY, 'Yes', (10, 30)) |
|---|
| 423 | self.Bind(wx.EVT_RADIOBUTTON, self._display_constraint, |
|---|
| 424 | id=self.hide_constraint.GetId()) |
|---|
| 425 | self.Bind(wx.EVT_RADIOBUTTON, self._display_constraint, |
|---|
| 426 | id=self.show_constraint.GetId()) |
|---|
| 427 | if self.batch_on: |
|---|
| 428 | self.hide_constraint.Enable(False) |
|---|
| 429 | self.show_constraint.Enable(False) |
|---|
| 430 | self.hide_constraint.SetValue(True) |
|---|
| 431 | self.show_constraint.SetValue(False) |
|---|
| 432 | |
|---|
| 433 | sizer_title.Add(wx.StaticText(self, wx.ID_ANY, " Model")) |
|---|
| 434 | sizer_title.Add((10, 10)) |
|---|
| 435 | sizer_title.Add(wx.StaticText(self, wx.ID_ANY, " Parameter")) |
|---|
| 436 | sizer_title.Add((10, 10)) |
|---|
| 437 | sizer_title.Add(wx.StaticText(self, wx.ID_ANY, " Add Constraint?")) |
|---|
| 438 | sizer_title.Add((10, 10)) |
|---|
| 439 | sizer_title.Add(self.show_constraint) |
|---|
| 440 | sizer_title.Add(self.hide_constraint) |
|---|
| 441 | sizer_title.Add((10, 10)) |
|---|
| 442 | |
|---|
| 443 | self.btAdd = wx.Button(self, self.ID_ADD, 'Add') |
|---|
| 444 | self.btAdd.Bind(wx.EVT_BUTTON, self._on_add_constraint, |
|---|
| 445 | id=self.btAdd.GetId()) |
|---|
| 446 | self.btAdd.SetToolTipString("Add another constraint?") |
|---|
| 447 | self.btAdd.Hide() |
|---|
| 448 | |
|---|
| 449 | text_hint = wx.StaticText(self, wx.ID_ANY, |
|---|
| 450 | "Example: [M0][parameter] = M1.parameter") |
|---|
| 451 | sizer_button.Add(text_hint, 0, |
|---|
| 452 | wx.LEFT | wx.EXPAND | wx.ADJUST_MINSIZE, 10) |
|---|
| 453 | sizer_button.Add(self.btAdd, 0, |
|---|
| 454 | wx.LEFT | wx.EXPAND | wx.ADJUST_MINSIZE, 10) |
|---|
| 455 | |
|---|
| 456 | box_sizer1.Add(sizer_title, flag=wx.TOP | wx.BOTTOM, border=10) |
|---|
| 457 | box_sizer1.Add(self.sizer_all_constraints, flag=wx.TOP | wx.BOTTOM, |
|---|
| 458 | border=10) |
|---|
| 459 | box_sizer1.Add(self.sizer_constraints, flag=wx.TOP | wx.BOTTOM, |
|---|
| 460 | border=10) |
|---|
| 461 | box_sizer1.Add(sizer_button, flag=wx.TOP | wx.BOTTOM, border=10) |
|---|
| 462 | |
|---|
| 463 | self.constraints_sizer.Add(box_sizer1, 0, wx.EXPAND | wx.ALL, 10) |
|---|
| 464 | |
|---|
| 465 | def _fill_sizer_fit(self): |
|---|
| 466 | """ |
|---|
| 467 | Draw fit button |
|---|
| 468 | """ |
|---|
| 469 | self.run_fit_sizer.Clear(True) |
|---|
| 470 | box_description = wx.StaticBox(self, wx.ID_ANY, "Fit ") |
|---|
| 471 | boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL) |
|---|
| 472 | sizer_button = wx.BoxSizer(wx.HORIZONTAL) |
|---|
| 473 | |
|---|
| 474 | # Fit button |
|---|
| 475 | self.btFit = wx.Button(self, self.ID_FIT, 'Fit', size=wx.DefaultSize) |
|---|
| 476 | self.btFit.Bind(wx.EVT_BUTTON, self.on_fit, id=self.btFit.GetId()) |
|---|
| 477 | self.btFit.SetToolTipString("Perform fit.") |
|---|
| 478 | |
|---|
| 479 | # General Help button |
|---|
| 480 | self.btHelp = wx.Button(self, wx.ID_HELP, 'HELP') |
|---|
| 481 | if self.batch_on: |
|---|
| 482 | self.btHelp.SetToolTipString("Combined Batch Fitting help.") |
|---|
| 483 | else: |
|---|
| 484 | self.btHelp.SetToolTipString("Simultaneous/Constrained Fitting help.") |
|---|
| 485 | self.btHelp.Bind(wx.EVT_BUTTON, self._on_help) |
|---|
| 486 | |
|---|
| 487 | # hint text on button line |
|---|
| 488 | if self.batch_on: |
|---|
| 489 | text = " Fit in Parallel all Data sets\n" |
|---|
| 490 | text += "and model selected." |
|---|
| 491 | else: |
|---|
| 492 | text = " At least one set of model and data\n" |
|---|
| 493 | text += " must be selected for fitting." |
|---|
| 494 | text_hint = wx.StaticText(self, wx.ID_ANY, text) |
|---|
| 495 | |
|---|
| 496 | sizer_button.Add(text_hint) |
|---|
| 497 | sizer_button.Add(self.btFit, 0, wx.LEFT | wx.ADJUST_MINSIZE, 10) |
|---|
| 498 | sizer_button.Add(self.btHelp, 0, wx.LEFT | wx.ADJUST_MINSIZE, 10) |
|---|
| 499 | |
|---|
| 500 | boxsizer1.Add(sizer_button, flag=wx.TOP | wx.BOTTOM, border=10) |
|---|
| 501 | self.run_fit_sizer.Add(boxsizer1, 0, wx.EXPAND | wx.ALL, 10) |
|---|
| 502 | |
|---|
| 503 | def on_remove(self, event): |
|---|
| 504 | """ |
|---|
| 505 | Remove constraint fields |
|---|
| 506 | """ |
|---|
| 507 | if len(self.constraints_list) == 1: |
|---|
| 508 | self.hide_constraint.SetValue(True) |
|---|
| 509 | self._hide_constraint() |
|---|
| 510 | return |
|---|
| 511 | if len(self.constraints_list) == 0: |
|---|
| 512 | return |
|---|
| 513 | wx.CallAfter(self._remove_after, event.GetId()) |
|---|
| 514 | # self._onAdd_constraint(None) |
|---|
| 515 | |
|---|
| 516 | def _remove_after(self, id): |
|---|
| 517 | for item in self.constraints_list: |
|---|
| 518 | if id == item.btRemove.GetId(): |
|---|
| 519 | self.sizer_constraints.Hide(item.sizer) |
|---|
| 520 | item.sizer.Clear(True) |
|---|
| 521 | self.sizer_constraints.Remove(item.sizer) |
|---|
| 522 | self.constraints_list.remove(item) |
|---|
| 523 | self.nb_constraint -= 1 |
|---|
| 524 | self.constraints_sizer.Layout() |
|---|
| 525 | self.FitInside() |
|---|
| 526 | break |
|---|
| 527 | |
|---|
| 528 | def on_fit(self, event): |
|---|
| 529 | """ |
|---|
| 530 | signal for fitting |
|---|
| 531 | |
|---|
| 532 | """ |
|---|
| 533 | if self.fit_started: |
|---|
| 534 | self._stop_fit() |
|---|
| 535 | self.fit_started = False |
|---|
| 536 | return |
|---|
| 537 | |
|---|
| 538 | flag = False |
|---|
| 539 | # check if the current page a simultaneous fit page or a batch page |
|---|
| 540 | if self == self._manager.sim_page: |
|---|
| 541 | flag = (self._manager.sim_page.uid == self.uid) |
|---|
| 542 | |
|---|
| 543 | # making sure all parameters content a constraint |
|---|
| 544 | if not self.batch_on and self.show_constraint.GetValue(): |
|---|
| 545 | if not self._set_constraint(): |
|---|
| 546 | return |
|---|
| 547 | # model was actually selected from this page to be fit |
|---|
| 548 | if len(self.model_to_fit) >= 1: |
|---|
| 549 | self.manager._reset_schedule_problem(value=0) |
|---|
| 550 | for item in self.model_list: |
|---|
| 551 | if item[0].GetValue(): |
|---|
| 552 | self.manager.schedule_for_fit(value=1, uid=item[2]) |
|---|
| 553 | try: |
|---|
| 554 | self.fit_started = True |
|---|
| 555 | wx.CallAfter(self.set_fitbutton) |
|---|
| 556 | if not self.manager.onFit(uid=self.uid): |
|---|
| 557 | return |
|---|
| 558 | except: |
|---|
| 559 | msg = "Select at least one parameter to fit in the FitPages." |
|---|
| 560 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 561 | else: |
|---|
| 562 | msg = "Select at least one model check box to fit " |
|---|
| 563 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 564 | self.set_state() |
|---|
| 565 | |
|---|
| 566 | def _on_fit_complete(self): |
|---|
| 567 | """ |
|---|
| 568 | Set the completion flag and display the updated fit button label. |
|---|
| 569 | """ |
|---|
| 570 | self.fit_started = False |
|---|
| 571 | self.set_fitbutton() |
|---|
| 572 | |
|---|
| 573 | def _stop_fit(self, event=None): |
|---|
| 574 | """ |
|---|
| 575 | Attempt to stop the fitting thread |
|---|
| 576 | |
|---|
| 577 | :param event: Event handler when stop fit is clicked |
|---|
| 578 | """ |
|---|
| 579 | if event is not None: |
|---|
| 580 | event.Skip() |
|---|
| 581 | self.manager.stop_fit(self.uid) |
|---|
| 582 | self.manager._reset_schedule_problem(value=0) |
|---|
| 583 | self._on_fit_complete() |
|---|
| 584 | |
|---|
| 585 | def set_fitbutton(self): |
|---|
| 586 | """ |
|---|
| 587 | Set fit button label depending on the fit_started |
|---|
| 588 | """ |
|---|
| 589 | label = "Stop" if self.fit_started else "Fit" |
|---|
| 590 | color = "red" if self.fit_started else "black" |
|---|
| 591 | |
|---|
| 592 | self.btFit.SetLabel(label) |
|---|
| 593 | self.btFit.SetForegroundColour(color) |
|---|
| 594 | self.btFit.Enable(True) |
|---|
| 595 | |
|---|
| 596 | def _on_help(self, event): |
|---|
| 597 | """ |
|---|
| 598 | Bring up the simultaneous Fitting Documentation whenever the HELP |
|---|
| 599 | button is clicked. |
|---|
| 600 | |
|---|
| 601 | Calls DocumentationWindow with the path of the location within the |
|---|
| 602 | documentation tree (after /doc/ ....". Note that when using old |
|---|
| 603 | versions of Wx (before 2.9) and thus not the release version of |
|---|
| 604 | installers, the help comes up at the top level of the file as |
|---|
| 605 | web browser does not pass anything past the # to the browser when it is |
|---|
| 606 | running "file:///...." |
|---|
| 607 | |
|---|
| 608 | :param event: Triggers on clicking the help button |
|---|
| 609 | """ |
|---|
| 610 | _TreeLocation = "user/sasgui/perspectives/fitting/fitting_help.html" |
|---|
| 611 | if not self.batch_on: |
|---|
| 612 | _PageAnchor = "#simultaneous-fit-mode" |
|---|
| 613 | _doc_viewer = DocumentationWindow(self, self.ID_DOC, _TreeLocation, |
|---|
| 614 | _PageAnchor, |
|---|
| 615 | "Simultaneous/Constrained Fitting Help") |
|---|
| 616 | else: |
|---|
| 617 | _PageAnchor = "#combined-batch-fit-mode" |
|---|
| 618 | _doc_viewer = DocumentationWindow(self, self.ID_DOC, _TreeLocation, |
|---|
| 619 | _PageAnchor, |
|---|
| 620 | "Combined Batch Fit Help") |
|---|
| 621 | |
|---|
| 622 | def set_manager(self, manager): |
|---|
| 623 | """ |
|---|
| 624 | set panel manager |
|---|
| 625 | |
|---|
| 626 | :param manager: instance of plugin fitting |
|---|
| 627 | """ |
|---|
| 628 | self.manager = manager |
|---|
| 629 | |
|---|
| 630 | def check_all_model_name(self, event=None): |
|---|
| 631 | """ |
|---|
| 632 | check all models names |
|---|
| 633 | """ |
|---|
| 634 | self.model_to_fit = [] |
|---|
| 635 | if self.cb1.GetValue(): |
|---|
| 636 | for item in self.model_list: |
|---|
| 637 | if item[0].IsEnabled(): |
|---|
| 638 | item[0].SetValue(True) |
|---|
| 639 | self.model_to_fit.append(item) |
|---|
| 640 | |
|---|
| 641 | # constraint info |
|---|
| 642 | self._store_model() |
|---|
| 643 | if not self.batch_on: |
|---|
| 644 | # display constraint fields |
|---|
| 645 | if (self.show_constraint.GetValue() and |
|---|
| 646 | len(self.constraints_list) == 0): |
|---|
| 647 | self._show_all_constraint() |
|---|
| 648 | self._show_constraint() |
|---|
| 649 | else: |
|---|
| 650 | for item in self.model_list: |
|---|
| 651 | item[0].SetValue(False) |
|---|
| 652 | |
|---|
| 653 | if not self.batch_on: |
|---|
| 654 | # constraint info |
|---|
| 655 | self._hide_constraint() |
|---|
| 656 | |
|---|
| 657 | self._update_easy_setup_cb() |
|---|
| 658 | self.FitInside() |
|---|
| 659 | |
|---|
| 660 | def check_model_name(self, event): |
|---|
| 661 | """ |
|---|
| 662 | Save information related to checkbox and their states |
|---|
| 663 | """ |
|---|
| 664 | self.model_to_fit = [] |
|---|
| 665 | for item in self.model_list: |
|---|
| 666 | if item[0].GetValue(): |
|---|
| 667 | self.model_to_fit.append(item) |
|---|
| 668 | else: |
|---|
| 669 | if item in self.model_to_fit: |
|---|
| 670 | self.model_to_fit.remove(item) |
|---|
| 671 | self.cb1.SetValue(False) |
|---|
| 672 | |
|---|
| 673 | # display constraint fields |
|---|
| 674 | if len(self.model_to_fit) >= 1: |
|---|
| 675 | self._store_model() |
|---|
| 676 | if not self.batch_on and self.show_constraint.GetValue() and\ |
|---|
| 677 | len(self.constraints_list) == 0: |
|---|
| 678 | self._show_all_constraint() |
|---|
| 679 | self._show_constraint() |
|---|
| 680 | |
|---|
| 681 | elif len(self.model_to_fit) < 1: |
|---|
| 682 | # constraint info |
|---|
| 683 | self._hide_constraint() |
|---|
| 684 | |
|---|
| 685 | self._update_easy_setup_cb() |
|---|
| 686 | # set the value of the main check button |
|---|
| 687 | if len(self.model_list) == len(self.model_to_fit): |
|---|
| 688 | self.cb1.SetValue(True) |
|---|
| 689 | self.FitInside() |
|---|
| 690 | return |
|---|
| 691 | else: |
|---|
| 692 | self.cb1.SetValue(False) |
|---|
| 693 | self.FitInside() |
|---|
| 694 | |
|---|
| 695 | def _update_easy_setup_cb(self): |
|---|
| 696 | """ |
|---|
| 697 | Update easy setup combobox on selecting a model |
|---|
| 698 | """ |
|---|
| 699 | if self.model_cbox_left is None or self.model_cbox_right is None: |
|---|
| 700 | return |
|---|
| 701 | |
|---|
| 702 | models = [(item[3].name, item[3]) for item in self.model_to_fit] |
|---|
| 703 | setComboBoxItems(self.model_cbox_left, models) |
|---|
| 704 | setComboBoxItems(self.model_cbox_right, models) |
|---|
| 705 | for item in self.constraints_list: |
|---|
| 706 | setComboBoxItems(item[0], models) |
|---|
| 707 | if self.model_cbox_left.GetSelection() == wx.NOT_FOUND: |
|---|
| 708 | self.model_cbox_left.SetSelection(0) |
|---|
| 709 | self.constraints_sizer.Layout() |
|---|
| 710 | |
|---|
| 711 | def _store_model(self): |
|---|
| 712 | """ |
|---|
| 713 | Store selected model |
|---|
| 714 | """ |
|---|
| 715 | if len(self.model_to_fit) < 1: |
|---|
| 716 | return |
|---|
| 717 | for item in self.model_to_fit: |
|---|
| 718 | model = item[3] |
|---|
| 719 | page_id = item[2] |
|---|
| 720 | self.constraint_dict[page_id] = model |
|---|
| 721 | |
|---|
| 722 | def _display_constraint(self, event): |
|---|
| 723 | """ |
|---|
| 724 | Show fields to add constraint |
|---|
| 725 | """ |
|---|
| 726 | if len(self.model_to_fit) < 1: |
|---|
| 727 | msg = "Select at least 1 model to add constraint " |
|---|
| 728 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 729 | # hide button |
|---|
| 730 | self._hide_constraint() |
|---|
| 731 | return |
|---|
| 732 | if self.show_constraint.GetValue(): |
|---|
| 733 | self._show_all_constraint() |
|---|
| 734 | self._show_constraint() |
|---|
| 735 | self.FitInside() |
|---|
| 736 | return |
|---|
| 737 | else: |
|---|
| 738 | self._hide_constraint() |
|---|
| 739 | return |
|---|
| 740 | |
|---|
| 741 | def _show_all_constraint(self): |
|---|
| 742 | """ |
|---|
| 743 | Show constraint fields |
|---|
| 744 | """ |
|---|
| 745 | box_description = wx.StaticBox(self, wx.ID_ANY, "Easy Setup ") |
|---|
| 746 | box_sizer = wx.StaticBoxSizer(box_description, wx.HORIZONTAL) |
|---|
| 747 | sizer_constraint = wx.BoxSizer(wx.HORIZONTAL) |
|---|
| 748 | self.model_cbox_left = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY) |
|---|
| 749 | self.model_cbox_left.Clear() |
|---|
| 750 | self.model_cbox_right = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY) |
|---|
| 751 | self.model_cbox_right.Clear() |
|---|
| 752 | wx.EVT_COMBOBOX(self.model_cbox_left, wx.ID_ANY, self._on_select_modelcb) |
|---|
| 753 | wx.EVT_COMBOBOX(self.model_cbox_right, wx.ID_ANY, self._on_select_modelcb) |
|---|
| 754 | egal_txt = wx.StaticText(self, wx.ID_ANY, " = ") |
|---|
| 755 | self.set_button = wx.Button(self, self.ID_SET_ALL, 'Set All') |
|---|
| 756 | self.set_button.Bind(wx.EVT_BUTTON, self._on_set_all_equal, |
|---|
| 757 | id=self.set_button.GetId()) |
|---|
| 758 | set_tip = "Add constraints for all the adjustable parameters " |
|---|
| 759 | set_tip += "(checked in FitPages) if exist." |
|---|
| 760 | self.set_button.SetToolTipString(set_tip) |
|---|
| 761 | self.set_button.Disable() |
|---|
| 762 | |
|---|
| 763 | for id, model in self.constraint_dict.iteritems(): |
|---|
| 764 | # check if all parameters have been selected for constraint |
|---|
| 765 | # then do not allow add constraint on parameters |
|---|
| 766 | self.model_cbox_left.Append(str(model.name), model) |
|---|
| 767 | self.model_cbox_left.Select(0) |
|---|
| 768 | for id, model in self.constraint_dict.iteritems(): |
|---|
| 769 | # check if all parameters have been selected for constraint |
|---|
| 770 | # then do not allow add constraint on parameters |
|---|
| 771 | self.model_cbox_right.Append(str(model.name), model) |
|---|
| 772 | box_sizer.Add(self.model_cbox_left, |
|---|
| 773 | flag=wx.RIGHT | wx.EXPAND, border=10) |
|---|
| 774 | # box_sizer.Add(wx.StaticText(self, wx.ID_ANY, ".parameters"), |
|---|
| 775 | # flag=wx.RIGHT | wx.EXPAND, border=5) |
|---|
| 776 | box_sizer.Add(egal_txt, flag=wx.RIGHT | wx.EXPAND, border=5) |
|---|
| 777 | box_sizer.Add(self.model_cbox_right, |
|---|
| 778 | flag=wx.RIGHT | wx.EXPAND, border=10) |
|---|
| 779 | # box_sizer.Add(wx.StaticText(self, wx.ID_ANY, ".parameters"), |
|---|
| 780 | # flag=wx.RIGHT | wx.EXPAND, border=5) |
|---|
| 781 | box_sizer.Add((20, -1)) |
|---|
| 782 | box_sizer.Add(self.set_button, flag=wx.RIGHT | wx.EXPAND, border=5) |
|---|
| 783 | sizer_constraint.Add(box_sizer, flag=wx.RIGHT | wx.EXPAND, border=5) |
|---|
| 784 | self.sizer_all_constraints.Insert(before=0, |
|---|
| 785 | item=sizer_constraint, |
|---|
| 786 | flag=wx.TOP | wx.BOTTOM | wx.EXPAND, border=5) |
|---|
| 787 | self.FitInside() |
|---|
| 788 | |
|---|
| 789 | def _on_select_modelcb(self, event): |
|---|
| 790 | """ |
|---|
| 791 | On select model left or right combobox |
|---|
| 792 | """ |
|---|
| 793 | event.Skip() |
|---|
| 794 | flag = True |
|---|
| 795 | if self.model_cbox_left.GetValue().strip() == '': |
|---|
| 796 | flag = False |
|---|
| 797 | if self.model_cbox_right.GetValue().strip() == '': |
|---|
| 798 | flag = False |
|---|
| 799 | if (self.model_cbox_left.GetValue() == |
|---|
| 800 | self.model_cbox_right.GetValue()): |
|---|
| 801 | flag = False |
|---|
| 802 | self.set_button.Enable(flag) |
|---|
| 803 | |
|---|
| 804 | def _on_set_all_equal(self, event): |
|---|
| 805 | """ |
|---|
| 806 | On set button |
|---|
| 807 | """ |
|---|
| 808 | event.Skip() |
|---|
| 809 | length = len(self.constraints_list) |
|---|
| 810 | if length < 1: |
|---|
| 811 | return |
|---|
| 812 | param_list = [] |
|---|
| 813 | param_list_b = [] |
|---|
| 814 | selection = self.model_cbox_left.GetCurrentSelection() |
|---|
| 815 | model_left = self.model_cbox_left.GetValue() |
|---|
| 816 | model = self.model_cbox_left.GetClientData(selection) |
|---|
| 817 | selection_b = self.model_cbox_right.GetCurrentSelection() |
|---|
| 818 | model_right = self.model_cbox_right.GetValue() |
|---|
| 819 | model_b = self.model_cbox_right.GetClientData(selection_b) |
|---|
| 820 | for id, dic_model in self.constraint_dict.iteritems(): |
|---|
| 821 | if model == dic_model: |
|---|
| 822 | param_list = self.page_finder[id].get_param2fit() |
|---|
| 823 | if model_b == dic_model: |
|---|
| 824 | param_list_b = self.page_finder[id].get_param2fit() |
|---|
| 825 | if len(param_list) > 0 and len(param_list_b) > 0: |
|---|
| 826 | break |
|---|
| 827 | num_cbox = 0 |
|---|
| 828 | has_param = False |
|---|
| 829 | for param in param_list: |
|---|
| 830 | num_cbox += 1 |
|---|
| 831 | if param in param_list_b: |
|---|
| 832 | item = self.constraints_list[-1] |
|---|
| 833 | item.model_cbox.SetStringSelection(model_left) |
|---|
| 834 | self._on_select_model(None) |
|---|
| 835 | item.param_cbox.Clear() |
|---|
| 836 | item.param_cbox.Append(str(param), model) |
|---|
| 837 | item.param_cbox.SetStringSelection(str(param)) |
|---|
| 838 | item.constraint.SetValue(str(model_right + "." + str(param))) |
|---|
| 839 | has_param = True |
|---|
| 840 | if num_cbox == (len(param_list) + 1): |
|---|
| 841 | break |
|---|
| 842 | self._show_constraint() |
|---|
| 843 | |
|---|
| 844 | self.FitInside() |
|---|
| 845 | if not has_param: |
|---|
| 846 | msg = " There is no adjustable parameter (checked to fit)" |
|---|
| 847 | msg += " either one of the models." |
|---|
| 848 | wx.PostEvent(self.parent.parent, StatusEvent(info="warning", |
|---|
| 849 | status=msg)) |
|---|
| 850 | else: |
|---|
| 851 | msg = " The constraints are added." |
|---|
| 852 | wx.PostEvent(self.parent.parent, StatusEvent(info="info", |
|---|
| 853 | status=msg)) |
|---|
| 854 | |
|---|
| 855 | def _show_constraint(self): |
|---|
| 856 | """ |
|---|
| 857 | Show constraint fields |
|---|
| 858 | :param dict: dictionary mapping constraint values |
|---|
| 859 | """ |
|---|
| 860 | self.btAdd.Show(True) |
|---|
| 861 | if len(self.constraints_list) != 0: |
|---|
| 862 | nb_fit_param = 0 |
|---|
| 863 | for id, model in self.constraint_dict.iteritems(): |
|---|
| 864 | nb_fit_param += len(self.page_finder[id].get_param2fit()) |
|---|
| 865 | # Don't add anymore |
|---|
| 866 | if len(self.constraints_list) == nb_fit_param: |
|---|
| 867 | msg = "Cannot add another constraint. Maximum of number " |
|---|
| 868 | msg += "Parameters name reached %s" % str(nb_fit_param) |
|---|
| 869 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 870 | self.sizer_constraints.Layout() |
|---|
| 871 | self.constraints_sizer.Layout() |
|---|
| 872 | return |
|---|
| 873 | if len(self.model_to_fit) < 1: |
|---|
| 874 | msg = "Select at least 1 model to add constraint " |
|---|
| 875 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 876 | self.sizer_constraints.Layout() |
|---|
| 877 | self.constraints_sizer.Layout() |
|---|
| 878 | return |
|---|
| 879 | |
|---|
| 880 | sizer_constraint = wx.BoxSizer(wx.HORIZONTAL) |
|---|
| 881 | |
|---|
| 882 | # Model list |
|---|
| 883 | model_cbox = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY) |
|---|
| 884 | model_cbox.Clear() |
|---|
| 885 | for id, model in self.constraint_dict.iteritems(): |
|---|
| 886 | # check if all parameters have been selected for constraint |
|---|
| 887 | # then do not allow add constraint on parameters |
|---|
| 888 | model_cbox.Append(str(model.name), model) |
|---|
| 889 | wx.EVT_COMBOBOX(model_cbox, wx.ID_ANY, self._on_select_model) |
|---|
| 890 | |
|---|
| 891 | # Parameters in model |
|---|
| 892 | param_cbox = wx.ComboBox(self, wx.ID_ANY, style=wx.CB_READONLY, |
|---|
| 893 | size=(100, -1)) |
|---|
| 894 | param_cbox.Hide() |
|---|
| 895 | wx.EVT_COMBOBOX(param_cbox, wx.ID_ANY, self._on_select_param) |
|---|
| 896 | |
|---|
| 897 | egal_txt = wx.StaticText(self, wx.ID_ANY, " = ") |
|---|
| 898 | |
|---|
| 899 | # Parameter constraint |
|---|
| 900 | constraint = wx.TextCtrl(self, wx.ID_ANY) |
|---|
| 901 | |
|---|
| 902 | # Remove button |
|---|
| 903 | #btRemove = wx.Button(self, self.ID_REMOVE, 'Remove') |
|---|
| 904 | bt_remove = wx.Button(self, self._ids.next(), 'Remove') |
|---|
| 905 | bt_remove.Bind(wx.EVT_BUTTON, self.on_remove, |
|---|
| 906 | id=bt_remove.GetId()) |
|---|
| 907 | bt_remove.SetToolTipString("Remove constraint.") |
|---|
| 908 | bt_remove.Hide() |
|---|
| 909 | |
|---|
| 910 | # Hid the add button, if it exists |
|---|
| 911 | if hasattr(self, "btAdd"): |
|---|
| 912 | self.btAdd.Hide() |
|---|
| 913 | |
|---|
| 914 | sizer_constraint.Add((5, -1)) |
|---|
| 915 | sizer_constraint.Add(model_cbox, flag=wx.RIGHT | wx.EXPAND, border=10) |
|---|
| 916 | sizer_constraint.Add(param_cbox, flag=wx.RIGHT | wx.EXPAND, border=5) |
|---|
| 917 | sizer_constraint.Add(egal_txt, flag=wx.RIGHT | wx.EXPAND, border=5) |
|---|
| 918 | sizer_constraint.Add(constraint, flag=wx.RIGHT | wx.EXPAND, border=10) |
|---|
| 919 | sizer_constraint.Add(bt_remove, flag=wx.RIGHT | wx.EXPAND, border=10) |
|---|
| 920 | |
|---|
| 921 | self.sizer_constraints.Insert(before=self.nb_constraint, |
|---|
| 922 | item=sizer_constraint, flag=wx.TOP | wx.BOTTOM | wx.EXPAND, |
|---|
| 923 | border=5) |
|---|
| 924 | c = ConstraintLine(model_cbox, param_cbox, egal_txt, |
|---|
| 925 | constraint, bt_remove, sizer_constraint) |
|---|
| 926 | self.constraints_list.append(c) |
|---|
| 927 | |
|---|
| 928 | self.nb_constraint += 1 |
|---|
| 929 | self.sizer_constraints.Layout() |
|---|
| 930 | self.constraints_sizer.Layout() |
|---|
| 931 | self.Layout() |
|---|
| 932 | |
|---|
| 933 | def _hide_constraint(self): |
|---|
| 934 | """ |
|---|
| 935 | hide buttons related constraint |
|---|
| 936 | """ |
|---|
| 937 | for id in self.page_finder.iterkeys(): |
|---|
| 938 | self.page_finder[id].clear_model_param() |
|---|
| 939 | |
|---|
| 940 | self.nb_constraint = 0 |
|---|
| 941 | self.constraint_dict = {} |
|---|
| 942 | if hasattr(self, "btAdd"): |
|---|
| 943 | self.btAdd.Hide() |
|---|
| 944 | self._store_model() |
|---|
| 945 | if self.model_cbox_left is not None: |
|---|
| 946 | self.model_cbox_left.Clear() |
|---|
| 947 | self.model_cbox_left = None |
|---|
| 948 | if self.model_cbox_right is not None: |
|---|
| 949 | self.model_cbox_right.Clear() |
|---|
| 950 | self.model_cbox_right = None |
|---|
| 951 | self.constraints_list = [] |
|---|
| 952 | self.sizer_all_constraints.Clear(True) |
|---|
| 953 | self.sizer_all_constraints.Layout() |
|---|
| 954 | self.sizer_constraints.Clear(True) |
|---|
| 955 | self.sizer_constraints.Layout() |
|---|
| 956 | self.constraints_sizer.Layout() |
|---|
| 957 | self.Layout() |
|---|
| 958 | self.FitInside() |
|---|
| 959 | |
|---|
| 960 | def _on_select_model(self, event): |
|---|
| 961 | """ |
|---|
| 962 | fill combo box with list of parameters |
|---|
| 963 | """ |
|---|
| 964 | if not self.constraints_list: |
|---|
| 965 | return |
|---|
| 966 | |
|---|
| 967 | # This way PC/MAC both work, instead of using event.GetClientData(). |
|---|
| 968 | model_cbox = self.constraints_list[-1].model_cbox |
|---|
| 969 | n = model_cbox.GetCurrentSelection() |
|---|
| 970 | if n == wx.NOT_FOUND: |
|---|
| 971 | return |
|---|
| 972 | |
|---|
| 973 | model = model_cbox.GetClientData(n) |
|---|
| 974 | param_list = [] |
|---|
| 975 | for id, dic_model in self.constraint_dict.iteritems(): |
|---|
| 976 | if model == dic_model: |
|---|
| 977 | param_list = self.page_finder[id].get_param2fit() |
|---|
| 978 | break |
|---|
| 979 | |
|---|
| 980 | param_cbox = self.constraints_list[-1].param_cbox |
|---|
| 981 | param_cbox.Clear() |
|---|
| 982 | # insert only fittable paramaters |
|---|
| 983 | for param in param_list: |
|---|
| 984 | param_cbox.Append(str(param), model) |
|---|
| 985 | param_cbox.Show(True) |
|---|
| 986 | |
|---|
| 987 | bt_remove = self.constraints_list[-1].btRemove |
|---|
| 988 | bt_remove.Show(True) |
|---|
| 989 | self.btAdd.Show(True) |
|---|
| 990 | # self.Layout() |
|---|
| 991 | self.FitInside() |
|---|
| 992 | |
|---|
| 993 | def _on_select_param(self, event): |
|---|
| 994 | """ |
|---|
| 995 | Store the appropriate constraint in the page_finder |
|---|
| 996 | """ |
|---|
| 997 | # This way PC/MAC both work, instead of using event.GetClientData(). |
|---|
| 998 | # n = self.param_cbox.GetCurrentSelection() |
|---|
| 999 | # model = self.param_cbox.GetClientData(n) |
|---|
| 1000 | # param = event.GetString() |
|---|
| 1001 | |
|---|
| 1002 | if self.constraints_list: |
|---|
| 1003 | self.constraints_list[-1].egal_txt.Show(True) |
|---|
| 1004 | self.constraints_list[-1].constraint.Show(True) |
|---|
| 1005 | |
|---|
| 1006 | def _on_add_constraint(self, event): |
|---|
| 1007 | """ |
|---|
| 1008 | Add another line for constraint |
|---|
| 1009 | """ |
|---|
| 1010 | if not self.show_constraint.GetValue(): |
|---|
| 1011 | msg = " Select Yes to add Constraint " |
|---|
| 1012 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 1013 | return |
|---|
| 1014 | # check that a constraint is added |
|---|
| 1015 | # before allow to add another constraint |
|---|
| 1016 | for item in self.constraints_list: |
|---|
| 1017 | if item.model_cbox.GetString(0) == "": |
|---|
| 1018 | msg = " Select a model Name! " |
|---|
| 1019 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 1020 | return |
|---|
| 1021 | if item.param_cbox.GetString(0) == "": |
|---|
| 1022 | msg = " Select a parameter Name! " |
|---|
| 1023 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 1024 | return |
|---|
| 1025 | if item.constraint.GetValue().lstrip().rstrip() == "": |
|---|
| 1026 | model = item.param_cbox.GetClientData( |
|---|
| 1027 | item.param_cbox.GetCurrentSelection()) |
|---|
| 1028 | if model is not None: |
|---|
| 1029 | msg = " Enter a constraint for %s.%s! " % (model.name, |
|---|
| 1030 | item.param_cbox.GetString(0)) |
|---|
| 1031 | else: |
|---|
| 1032 | msg = " Enter a constraint" |
|---|
| 1033 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 1034 | return |
|---|
| 1035 | # some model or parameters can be constrained |
|---|
| 1036 | self._show_constraint() |
|---|
| 1037 | self.FitInside() |
|---|
| 1038 | |
|---|
| 1039 | def _set_constraint(self): |
|---|
| 1040 | """ |
|---|
| 1041 | get values from the constraint textcrtl ,parses them into model name |
|---|
| 1042 | parameter name and parameters values. |
|---|
| 1043 | store them in a list self.params .when when params is not empty |
|---|
| 1044 | set_model uses it to reset the appropriate model |
|---|
| 1045 | and its appropriates parameters |
|---|
| 1046 | """ |
|---|
| 1047 | for item in self.constraints_list: |
|---|
| 1048 | select0 = item.model_cbox.GetSelection() |
|---|
| 1049 | if select0 == wx.NOT_FOUND: |
|---|
| 1050 | continue |
|---|
| 1051 | model = item.model_cbox.GetClientData(select0) |
|---|
| 1052 | select1 = item.param_cbox.GetSelection() |
|---|
| 1053 | if select1 == wx.NOT_FOUND: |
|---|
| 1054 | continue |
|---|
| 1055 | param = item.param_cbox.GetString(select1) |
|---|
| 1056 | constraint = item.constraint.GetValue().lstrip().rstrip() |
|---|
| 1057 | if param.lstrip().rstrip() == "": |
|---|
| 1058 | param = None |
|---|
| 1059 | msg = " Constraint will be ignored!. missing parameters" |
|---|
| 1060 | msg += " in combobox to set constraint! " |
|---|
| 1061 | wx.PostEvent(self.parent.parent, StatusEvent(status=msg)) |
|---|
| 1062 | for id, value in self.constraint_dict.iteritems(): |
|---|
| 1063 | if model == value: |
|---|
| 1064 | if constraint == "": |
|---|
| 1065 | msg = " Constraint will be ignored!. missing value" |
|---|
| 1066 | msg += " in textcrtl to set constraint! " |
|---|
| 1067 | wx.PostEvent(self.parent.parent, |
|---|
| 1068 | StatusEvent(status=msg)) |
|---|
| 1069 | constraint = None |
|---|
| 1070 | if str(param) in self.page_finder[id].get_param2fit(): |
|---|
| 1071 | msg = " Checking constraint for parameter: %s ", param |
|---|
| 1072 | wx.PostEvent(self.parent.parent, |
|---|
| 1073 | StatusEvent(info="info", status=msg)) |
|---|
| 1074 | else: |
|---|
| 1075 | model_name = item[0].GetLabel() |
|---|
| 1076 | fitpage = self.page_finder[id].get_fit_tab_caption() |
|---|
| 1077 | msg = "All constrainted parameters must be set " |
|---|
| 1078 | msg += " adjustable: '%s.%s' " % (model_name, param) |
|---|
| 1079 | msg += "is NOT checked in '%s'. " % fitpage |
|---|
| 1080 | msg += " Please check it to fit or" |
|---|
| 1081 | msg += " remove the line of the constraint." |
|---|
| 1082 | wx.PostEvent(self.parent.parent, |
|---|
| 1083 | StatusEvent(info="error", status=msg)) |
|---|
| 1084 | return False |
|---|
| 1085 | |
|---|
| 1086 | for fid in self.page_finder[id].iterkeys(): |
|---|
| 1087 | # wrap in param/constraint in str() to remove unicode |
|---|
| 1088 | self.page_finder[id].set_model_param(str(param), |
|---|
| 1089 | str(constraint), fid=fid) |
|---|
| 1090 | break |
|---|
| 1091 | return True |
|---|
| 1092 | |
|---|
| 1093 | def on_set_focus(self, event=None): |
|---|
| 1094 | """ |
|---|
| 1095 | The derivative class is on focus if implemented |
|---|
| 1096 | """ |
|---|
| 1097 | if self.parent is not None: |
|---|
| 1098 | if self.parent.parent is not None: |
|---|
| 1099 | wx.PostEvent(self.parent.parent, PanelOnFocusEvent(panel=self)) |
|---|
| 1100 | self.page_finder = self.parent._manager.get_page_finder() |
|---|
| 1101 | |
|---|
| 1102 | |
|---|
| 1103 | def setComboBoxItems(cbox, items): |
|---|
| 1104 | assert isinstance(cbox, wx.ComboBox) |
|---|
| 1105 | selected = cbox.GetStringSelection() |
|---|
| 1106 | cbox.Clear() |
|---|
| 1107 | for k, (name, value) in enumerate(items): |
|---|
| 1108 | cbox.Append(name, value) |
|---|
| 1109 | cbox.SetStringSelection(selected) |
|---|
