Show 1D/2D

Models are normally fitted to 1D (ie, I(Q) vs Q) data sets, but some models in SasView can also be fitted to 2D (ie, I(Qx,Qy) vs Qx vs Qy) data sets.

NB: Magnetic scattering can only be fitted in SasView in 2D.

To activate 2D fitting mode, click the Show 2D button on the Fit Page. To return to 1D fitting model, click the same button (which will now say Show 1D).

Changing category

To change category, highlight a model in the list by left-clicking on its entry and then click the Modify button. Use the Change Category panel that appears to make the required changes.

To create a category for the selected model, click the Add button. In order to delete a category, select the category name and click the Remove Selected button. Then click Done.

Showing/hiding models

Use the Enable All / Disable All buttons and the check boxes beside each model to select the models to show/hide. To apply the selection, click Ok. Otherwise click Cancel.

NB: It may be necessary to change to a different category and then back again before any changes take effect.

New

A model template generated by this option can be viewed and further modified using the :ref:`Advanced` option.

NB: "Fit Parameters" has been split into two sections, those which can be polydisperse (shape and orientation parameters) and those which are not (scattering length densities, for example).

Sum|Multi(p1,p2)

This option creates a custom model of the form

Custom Model = scale_factor * (model1 +/* model2)

In the Easy Sum/Multi Editor give the new custom model a function name and brief description (to appear under the Details button on the Fit Page). Then select two existing models, as p1 and p2, and the required operator, '+' or '*' between them. Finally, click the Apply button to generate the model and then click Close.

NB: Any changes to a custom model generated in this way only become effective after it is re-selected from the model drop-down menu on the Fit Page.

Advanced

Selecting this option shows all the custom models in the plugin model folder

C:\Users\[username]\.sasview\plugin_models - (on Windows)

You can edit, modify, and save the Python code in any of these models using the Advanced Custom Model Editor.

See :ref:`Writing_a_Plugin` for details on the plugin format.

NB: Sum/Product models are still using the SasView 3.x model format. Unless you are confident about what you are doing, it is recommended that you only modify lines denoted with the ## <----- comments!

When editing is complete, select Run -> Compile from the Model Editor menu bar. An Info box will appear with the results of the compilation and model unit tests. The model will only be usable if the tests 'pass'.

To use the model, go to the relevant Fit Page, select the Customized Models category and then select the model from the drop-down menu.

NB: Any changes to a custom model generated in this way only become effective after it is re-selected from the model drop-down menu on the Fit Page.

Delete

Simply highlight the custom model to be removed. This operation is final!

NB: Custom models shipped with SasView cannot be removed in this way.

Copy/Paste Parameters

It is possible to copy the parameters from one Fit Page and to paste them into another Fit Page using the same model.

To copy parameters, either:

• Select Edit -> Copy Params from the menu bar, or
• Use Ctrl(Cmd on Mac) + Left Mouse Click on the Fit Page.

To paste parameters, either:

• Select Edit -> Paste Params from the menu bar, or
• Use Ctrl(Cmd on Mac) + Shift + Left-click on the Fit Page.

If either operation is successful a message will appear in the info line at the bottom of the SasView window.

Bookmark

To Bookmark a Fit Page either:

• Select a Fit Page and then click on Bookmark in the tool bar, or
• Right-click and select the Bookmark in the popup menu.

Method

Now go to each FitPage in turn and:

Select the required category and model;

Unselect all the model parameters;

Enter some starting guesses for the parameters;

Enter any parameter limits (recommended);

Select which parameters will refine (selecting all is generally a bad idea...);

When done, select Constrained or Simultaneous Fit under Fitting in the menu bar.

In the Const & Simul Fit page that appears, select which data sets are to be simultaneously fitted (this will probably be all of them or you would not have loaded them in the first place!).

To tie parameters between the data sets with constraints, check the 'yes' radio button next to Add Constraint? in the Fit Constraints box.

NB: You can only constrain parameters that are set to refine.

When ready, click the Fit button on the Const & Simul Fit page, NOT the Fit button on the individual FitPage's.

Simultaneous Fits without Constraints

The results of the model-fitting will be returned to each of the individual FitPage's.

Note that the chi2/Npts value returned is the SUM of the chi2/Npts of each fit. To see the chi2/Npts value for a specific FitPage, click the Compute button at the bottom of that FitPage to recalculate. Also see :ref:`Assessing_Fit_Quality`.

Simultaneous Fits with Constraints

Use the Easy Setup drop-down buttons in the Const & Simul Fit page to set up constraints between FitPage's.

Constraints will generally be of the form

Mi Parameter1 = Mj.Parameter1

however the text box after the '=' sign can be used to adjust this relationship; for example

Mi Parameter1 = scalar * Mj.Parameter1

A 'free-form' constraint box is also provided.

Many constraints can be entered for a single fit.

The results of the model-fitting will be returned to each of the individual FitPage's.

Note that the chi2/Npts value returned is the SUM of the chi2/Npts of each fit. To see the chi2/Npts value for a specific FitPage, click the Compute button at the bottom of that FitPage to recalculate. Also see :ref:`Assessing_Fit_Quality`.

Method

Now Select All Data in the Data Explorer, check the Batch Mode radio button at the bottom of that panel and Send To Fitting. A BatchPage will be created.

NB: The Batch Page can also be created by checking the Batch Mode radio button and selecting New Fit Page under Fitting in the menu bar.

Using the drop-down menus in the BatchPage, now set up the same data set with the same model that you just fitted in single fit mode. A quick way to set the model parameter values is to just copy them from the earlier Single Fit. To do this, go back to the Single Fit FitPage, select Copy Params under Edit in the menu bar, then go back to the BatchPage and Paste Params.

When ready, use the Fit button on the BatchPage to perform the fitting, NOT the Fit button on the individual FitPage's.

Unlike in single fit mode, the results of batch fits are not returned to the BatchPage. Instead, a spreadsheet-like :ref:`Grid_Window` will appear.

If you want to visually check a graph of a particular fit, click on the name of a Data set in the Grid Window and then click the View Fits button. The data and the model fit will be displayed. If you select mutliple data sets they will all appear on one graph.

NB: In theory, returning to the BatchPage and changing the name of the I(Q) data source should also work, but at the moment whilst this does change the data set displayed it always superimposes the 'theory' corresponding to the starting parameters.

If you select a 'Chi2' value and click the View Fits button a graph of the residuals for that data set is displayed. Again, if you select multiple 'Chi2' values then all the residuals data will appear on one graph. Also see :ref:`Assessing_Fit_Quality`.

Chain Fitting

By default, the same parameter values copied from the initial single fit into the BatchPage will be used as the starting parameters for all batch fits. It is, however, possible to get SasView to use the results of a fit to a preceding data set as the starting parameters for the next fit in the sequence. This variation of batch fitting is called Chain Fitting, and will considerably speed up model-fitting if you have lots of very similar data sets where a few parameters are gradually changing. Do not use chain fitting on disparate data sets.

To use chain fitting, select Chain Fitting under Fitting in the menu bar. It toggles on/off, so selecting it again will switch back to normal batch fitting.

Grid Window

The Grid Window provides an easy way to view the results from batch fitting. It will be displayed automatically when a batch fit completes, but may be opened at any time by selecting Show Grid Window under View in the menu bar.

Once a batch fit is completed, all model parameters are displayed but not their uncertainties. To view the uncertainties, click on a given column then go to Edit in the menu bar, select Insert Column Before and choose the required data from the list. An empty column can be inserted in the same way.

To remove a column from the grid, click on the column header and choose Remove Column under Edit in the menu bar. The same functionality also allows you to re-order columns.

NB: You cannot insert/remove/re-order the rows in the Grid Window.

All of the above functions are also available by right-clicking on a column label.

NB: If there is an existing Grid Window and another batch fit is performed, an additional 'Table' tab will be added to the Grid Window.

The parameter values in the currently selected table of the Grid Window can be output to a CSV file by choosing Save As under File in the (Grid Window) menu bar. The default filename includes the date and time that the batch fit was performed.

Saved CSV files can be reloaded by choosing Open under File in the Grid Window menu bar. The loaded parameters will appear in a new table tab.

NB: Saving the Grid Window does not save any experimental data, residuals or actual model fits. Consequently if you reload a saved CSV file the ability to View Fits will be lost.

Parameter Plots

Any column of numeric parameter values can be plotted against another using the Grid Window. Simply select one column at the time and click the Add button next to the required X/Y-axis Selection Range text box. When both the X and Y axis boxes have been completed, click the Plot button.

When the Add button is clicked, SasView also automatically completes the X/Y-axis Label text box with the heading from Row 1 of the selected table, but different labels and units can be entered manually.

The X/Y-axis Selection Range can be edited manually. The text control box recognises the operators +, -, *, /, or 'pow', and allows the following types of expression :

1. if an axis label range is a function of 1 or more columns, write this type of expression

   constant1 * column_name1 [minimum row index : maximum row index] operator constant2 * column_name2 [minimum row index : maximum row index]

   Example: radius [2 : 5] -3 * scale [2 : 5]

2. if only some values of a given column are needed but the range between the first row and the last row used is not continuous, write this type of expression

   column_name1 [minimum row index1 : maximum row index1] , column_name1 [minimum row index2 : maximum row index2]

   Example: radius [2 : 5] , radius [10 : 25]