cansas_reader.py @ e56f335

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalcmagnetic_scattrelease-4.2.2ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since e56f335 was c54c965, checked in by krzywon, 7 years ago
Modify base file reader class and cansas reader to properly load save states.
Property mode set to `100644`
File size: 63.7 KB

Line
1	import logging
2	import numpy as np
3	import os
4	import sys
5	import datetime
6	import inspect
7	# For saving individual sections of data
8	from sas.sascalc.dataloader.data_info import Data1D, Data2D, DataInfo, \
9	plottable_1D, plottable_2D
10	from sas.sascalc.dataloader.data_info import Collimation, TransmissionSpectrum, \
11	Detector, Process, Aperture
12	from sas.sascalc.dataloader.data_info import \
13	combine_data_info_with_plottable as combine_data
14	import sas.sascalc.dataloader.readers.xml_reader as xml_reader
15	from sas.sascalc.dataloader.readers.xml_reader import XMLreader
16	from sas.sascalc.dataloader.readers.cansas_constants import CansasConstants, CurrentLevel
17	from sas.sascalc.dataloader.loader_exceptions import FileContentsException, \
18	DefaultReaderException, DataReaderException
19
20	# The following 2 imports ARE used. Do not remove either.
21	import xml.dom.minidom
22	from xml.dom.minidom import parseString
23
24	from lxml import etree
25
26	logger = logging.getLogger(__name__)
27
28	PREPROCESS = "xmlpreprocess"
29	ENCODING = "encoding"
30	RUN_NAME_DEFAULT = "None"
31	INVALID_SCHEMA_PATH_1_1 = "{0}/sas/sascalc/dataloader/readers/schema/cansas1d_invalid_v1_1.xsd"
32	INVALID_SCHEMA_PATH_1_0 = "{0}/sas/sascalc/dataloader/readers/schema/cansas1d_invalid_v1_0.xsd"
33	INVALID_XML = "\n\nThe loaded xml file, {0} does not fully meet the CanSAS v1.x specification. SasView loaded " + \
34	"as much of the data as possible.\n\n"
35	HAS_CONVERTER = True
36	try:
37	from sas.sascalc.data_util.nxsunit import Converter
38	except ImportError:
39	HAS_CONVERTER = False
40
41	CONSTANTS = CansasConstants()
42	CANSAS_FORMAT = CONSTANTS.format
43	CANSAS_NS = CONSTANTS.names
44	ALLOW_ALL = True
45
46	class Reader(XMLreader):
47	cansas_version = "1.0"
48	base_ns = "{cansas1d/1.0}"
49	cansas_defaults = None
50	type_name = "canSAS"
51	invalid = True
52	frm = ""
53	# Log messages and errors
54	logging = None
55	errors = set()
56	# Namespace hierarchy for current xml_file object
57	names = None
58	ns_list = None
59	# Temporary storage location for loading multiple data sets in a single file
60	current_data1d = None
61	data = None
62	# Wildcards
63	type = ["XML files (.xml)\|.xml", "SasView Save Files (.svs)\|.svs"]
64	# List of allowed extensions
65	ext = ['.xml', '.XML', '.svs', '.SVS']
66	# Flag to bypass extension check
67	allow_all = True
68
69	def reset_state(self):
70	"""
71	Resets the class state to a base case when loading a new data file so previous
72	data files do not appear a second time
73	"""
74	self.current_datainfo = None
75	self.current_dataset = None
76	self.current_data1d = None
77	self.data = []
78	self.process = Process()
79	self.transspectrum = TransmissionSpectrum()
80	self.aperture = Aperture()
81	self.collimation = Collimation()
82	self.detector = Detector()
83	self.names = []
84	self.cansas_defaults = {}
85	self.output = []
86	self.ns_list = None
87	self.logging = []
88	self.encoding = None
89
90	def read(self, xml_file, schema_path="", invalid=True):
91	if schema_path != "" or invalid != True:
92	# read has been called from self.get_file_contents because xml file doens't conform to schema
93	_, self.extension = os.path.splitext(os.path.basename(xml_file))
94	return self.get_file_contents(xml_file=xml_file, schema_path=schema_path, invalid=invalid)
95
96	# Otherwise, read has been called by the data loader - file_reader_base_class handles this
97	return super(XMLreader, self).read(xml_file)
98
99	def get_file_contents(self, xml_file=None, schema_path="", invalid=True):
100	# Reset everything since we're loading a new file
101	self.reset_state()
102	self.invalid = invalid
103	if xml_file is None:
104	xml_file = self.f_open.name
105	# We don't sure f_open since lxml handles opnening/closing files
106	if not self.f_open.closed:
107	self.f_open.close()
108
109	basename, _ = os.path.splitext(os.path.basename(xml_file))
110
111	try:
112	# Raises FileContentsException
113	self.load_file_and_schema(xml_file, schema_path)
114	self.current_datainfo = DataInfo()
115	# Raises FileContentsException if file doesn't meet CanSAS schema
116	self.is_cansas(self.extension)
117	self.invalid = False # If we reach this point then file must be valid CanSAS
118
119	# Parse each SASentry
120	entry_list = self.xmlroot.xpath('/ns:SASroot/ns:SASentry', namespaces={
121	'ns': self.cansas_defaults.get("ns")
122	})
123	# Look for a SASentry
124	self.names.append("SASentry")
125	self.set_processing_instructions()
126
127	for entry in entry_list:
128	self.current_datainfo.filename = basename + self.extension
129	self.current_datainfo.meta_data["loader"] = "CanSAS XML 1D"
130	self.current_datainfo.meta_data[PREPROCESS] = self.processing_instructions
131	self._parse_entry(entry)
132	self.data_cleanup()
133	except FileContentsException as fc_exc:
134	# File doesn't meet schema - try loading with a less strict schema
135	base_name = xml_reader.__file__
136	base_name = base_name.replace("\\", "/")
137	base = base_name.split("/sas/")[0]
138	if self.cansas_version == "1.1":
139	invalid_schema = INVALID_SCHEMA_PATH_1_1.format(base, self.cansas_defaults.get("schema"))
140	else:
141	invalid_schema = INVALID_SCHEMA_PATH_1_0.format(base, self.cansas_defaults.get("schema"))
142	self.set_schema(invalid_schema)
143	if self.invalid:
144	try:
145	# Load data with less strict schema
146	self.read(xml_file, invalid_schema, False)
147
148	# File can still be read but doesn't match schema, so raise exception
149	self.load_file_and_schema(xml_file) # Reload strict schema so we can find where error are in file
150	invalid_xml = self.find_invalid_xml()
151	if invalid_xml != "":
152	invalid_xml = INVALID_XML.format(basename + self.extension) + invalid_xml
153	raise DataReaderException(invalid_xml) # Handled by base class
154	except FileContentsException as fc_exc:
155	msg = "CanSAS Reader could not load the file {}".format(xml_file)
156	if fc_exc.message is not None: # Propagate error messages from earlier
157	msg = fc_exc.message
158	if not self.extension in self.ext: # If the file has no associated loader
159	raise DefaultReaderException(msg)
160	raise FileContentsException(msg)
161	pass
162	else:
163	raise fc_exc
164	except Exception as e: # Convert all other exceptions to FileContentsExceptions
165	raise FileContentsException(e.message)
166
167
168	def load_file_and_schema(self, xml_file, schema_path=""):
169	base_name = xml_reader.__file__
170	base_name = base_name.replace("\\", "/")
171	base = base_name.split("/sas/")[0]
172
173	# Try and parse the XML file
174	try:
175	self.set_xml_file(xml_file)
176	except etree.XMLSyntaxError: # File isn't valid XML so can't be loaded
177	msg = "SasView cannot load {}.\nInvalid XML syntax".format(xml_file)
178	raise FileContentsException(msg)
179
180	self.cansas_version = self.xmlroot.get("version", "1.0")
181	self.cansas_defaults = CANSAS_NS.get(self.cansas_version, "1.0")
182
183	if schema_path == "":
184	schema_path = "{}/sas/sascalc/dataloader/readers/schema/{}".format(
185	base, self.cansas_defaults.get("schema").replace("\\", "/")
186	)
187	self.set_schema(schema_path)
188
189	def is_cansas(self, ext="xml"):
190	"""
191	Checks to see if the XML file is a CanSAS file
192
193	:param ext: The file extension of the data file
194	:raises FileContentsException: Raised if XML file isn't valid CanSAS
195	"""
196	if self.validate_xml(): # Check file is valid XML
197	name = "{http://www.w3.org/2001/XMLSchema-instance}schemaLocation"
198	value = self.xmlroot.get(name)
199	# Check schema CanSAS version matches file CanSAS version
200	if CANSAS_NS.get(self.cansas_version).get("ns") == value.rsplit(" ")[0]:
201	return True
202	if ext == "svs":
203	return True # Why is this required?
204	# If we get to this point then file isn't valid CanSAS
205	logger.warning("File doesn't meet CanSAS schema. Trying to load anyway.")
206	raise FileContentsException("The file is not valid CanSAS")
207
208	def _parse_entry(self, dom, recurse=False):
209	if not self._is_call_local() and not recurse:
210	self.reset_state()
211	self.data = []
212	self.current_datainfo = DataInfo()
213	self.names.append("SASentry")
214	self.parent_class = "SASentry"
215	# Create an empty dataset if no data has been passed to the reader
216	if self.current_dataset is None:
217	self.current_dataset = plottable_1D(np.empty(0), np.empty(0),
218	np.empty(0), np.empty(0))
219	self.base_ns = "{" + CANSAS_NS.get(self.cansas_version).get("ns") + "}"
220
221	# Loop through each child in the parent element
222	for node in dom:
223	attr = node.attrib
224	name = attr.get("name", "")
225	type = attr.get("type", "")
226	# Get the element name and set the current names level
227	tagname = node.tag.replace(self.base_ns, "")
228	tagname_original = tagname
229	# Skip this iteration when loading in save state information
230	if tagname == "fitting_plug_in" or tagname == "pr_inversion" or tagname == "invariant":
231	continue
232	# Get where to store content
233	self.names.append(tagname_original)
234	self.ns_list = CONSTANTS.iterate_namespace(self.names)
235	# If the element is a child element, recurse
236	if len(node.getchildren()) > 0:
237	self.parent_class = tagname_original
238	if tagname == 'SASdata':
239	self._initialize_new_data_set(node)
240	if isinstance(self.current_dataset, plottable_2D):
241	x_bins = attr.get("x_bins", "")
242	y_bins = attr.get("y_bins", "")
243	if x_bins is not "" and y_bins is not "":
244	self.current_dataset.shape = (x_bins, y_bins)
245	else:
246	self.current_dataset.shape = ()
247	# Recurse to access data within the group
248	self._parse_entry(node, recurse=True)
249	if tagname == "SASsample":
250	self.current_datainfo.sample.name = name
251	elif tagname == "beam_size":
252	self.current_datainfo.source.beam_size_name = name
253	elif tagname == "SAScollimation":
254	self.collimation.name = name
255	elif tagname == "aperture":
256	self.aperture.name = name
257	self.aperture.type = type
258	self._add_intermediate()
259	else:
260	if isinstance(self.current_dataset, plottable_2D):
261	data_point = node.text
262	unit = attr.get('unit', '')
263	else:
264	data_point, unit = self._get_node_value(node, tagname)
265
266	# If this is a dataset, store the data appropriately
267	if tagname == 'Run':
268	self.current_datainfo.run_name[data_point] = name
269	self.current_datainfo.run.append(data_point)
270	elif tagname == 'Title':
271	self.current_datainfo.title = data_point
272	elif tagname == 'SASnote':
273	self.current_datainfo.notes.append(data_point)
274
275	# I and Q points
276	elif tagname == 'I' and isinstance(self.current_dataset, plottable_1D):
277	self.current_dataset.yaxis("Intensity", unit)
278	self.current_dataset.y = np.append(self.current_dataset.y, data_point)
279	elif tagname == 'Idev' and isinstance(self.current_dataset, plottable_1D):
280	self.current_dataset.dy = np.append(self.current_dataset.dy, data_point)
281	elif tagname == 'Q':
282	self.current_dataset.xaxis("Q", unit)
283	self.current_dataset.x = np.append(self.current_dataset.x, data_point)
284	elif tagname == 'Qdev':
285	self.current_dataset.dx = np.append(self.current_dataset.dx, data_point)
286	elif tagname == 'dQw':
287	if self.current_dataset.dxw is None:
288	self.current_dataset.dxw = np.empty(0)
289	self.current_dataset.dxw = np.append(self.current_dataset.dxw, data_point)
290	elif tagname == 'dQl':
291	if self.current_dataset.dxl is None:
292	self.current_dataset.dxl = np.empty(0)
293	self.current_dataset.dxl = np.append(self.current_dataset.dxl, data_point)
294	elif tagname == 'Qmean':
295	pass
296	elif tagname == 'Shadowfactor':
297	pass
298	elif tagname == 'Sesans':
299	self.current_datainfo.isSesans = bool(data_point)
300	self.current_dataset.xaxis(attr.get('x_axis'),
301	attr.get('x_unit'))
302	self.current_dataset.yaxis(attr.get('y_axis'),
303	attr.get('y_unit'))
304	elif tagname == 'yacceptance':
305	self.current_datainfo.sample.yacceptance = (data_point, unit)
306	elif tagname == 'zacceptance':
307	self.current_datainfo.sample.zacceptance = (data_point, unit)
308
309	# I and Qx, Qy - 2D data
310	elif tagname == 'I' and isinstance(self.current_dataset, plottable_2D):
311	self.current_dataset.yaxis("Intensity", unit)
312	self.current_dataset.data = np.fromstring(data_point, dtype=float, sep=",")
313	elif tagname == 'Idev' and isinstance(self.current_dataset, plottable_2D):
314	self.current_dataset.err_data = np.fromstring(data_point, dtype=float, sep=",")
315	elif tagname == 'Qx':
316	self.current_dataset.xaxis("Qx", unit)
317	self.current_dataset.qx_data = np.fromstring(data_point, dtype=float, sep=",")
318	elif tagname == 'Qy':
319	self.current_dataset.yaxis("Qy", unit)
320	self.current_dataset.qy_data = np.fromstring(data_point, dtype=float, sep=",")
321	elif tagname == 'Qxdev':
322	self.current_dataset.xaxis("Qxdev", unit)
323	self.current_dataset.dqx_data = np.fromstring(data_point, dtype=float, sep=",")
324	elif tagname == 'Qydev':
325	self.current_dataset.yaxis("Qydev", unit)
326	self.current_dataset.dqy_data = np.fromstring(data_point, dtype=float, sep=",")
327	elif tagname == 'Mask':
328	inter = [item == "1" for item in data_point.split(",")]
329	self.current_dataset.mask = np.asarray(inter, dtype=bool)
330
331	# Sample Information
332	elif tagname == 'ID' and self.parent_class == 'SASsample':
333	self.current_datainfo.sample.ID = data_point
334	elif tagname == 'Title' and self.parent_class == 'SASsample':
335	self.current_datainfo.sample.name = data_point
336	elif tagname == 'thickness' and self.parent_class == 'SASsample':
337	self.current_datainfo.sample.thickness = data_point
338	self.current_datainfo.sample.thickness_unit = unit
339	elif tagname == 'transmission' and self.parent_class == 'SASsample':
340	self.current_datainfo.sample.transmission = data_point
341	elif tagname == 'temperature' and self.parent_class == 'SASsample':
342	self.current_datainfo.sample.temperature = data_point
343	self.current_datainfo.sample.temperature_unit = unit
344	elif tagname == 'details' and self.parent_class == 'SASsample':
345	self.current_datainfo.sample.details.append(data_point)
346	elif tagname == 'x' and self.parent_class == 'position':
347	self.current_datainfo.sample.position.x = data_point
348	self.current_datainfo.sample.position_unit = unit
349	elif tagname == 'y' and self.parent_class == 'position':
350	self.current_datainfo.sample.position.y = data_point
351	self.current_datainfo.sample.position_unit = unit
352	elif tagname == 'z' and self.parent_class == 'position':
353	self.current_datainfo.sample.position.z = data_point
354	self.current_datainfo.sample.position_unit = unit
355	elif tagname == 'roll' and self.parent_class == 'orientation' and 'SASsample' in self.names:
356	self.current_datainfo.sample.orientation.x = data_point
357	self.current_datainfo.sample.orientation_unit = unit
358	elif tagname == 'pitch' and self.parent_class == 'orientation' and 'SASsample' in self.names:
359	self.current_datainfo.sample.orientation.y = data_point
360	self.current_datainfo.sample.orientation_unit = unit
361	elif tagname == 'yaw' and self.parent_class == 'orientation' and 'SASsample' in self.names:
362	self.current_datainfo.sample.orientation.z = data_point
363	self.current_datainfo.sample.orientation_unit = unit
364
365	# Instrumental Information
366	elif tagname == 'name' and self.parent_class == 'SASinstrument':
367	self.current_datainfo.instrument = data_point
368
369	# Detector Information
370	elif tagname == 'name' and self.parent_class == 'SASdetector':
371	self.detector.name = data_point
372	elif tagname == 'SDD' and self.parent_class == 'SASdetector':
373	self.detector.distance = data_point
374	self.detector.distance_unit = unit
375	elif tagname == 'slit_length' and self.parent_class == 'SASdetector':
376	self.detector.slit_length = data_point
377	self.detector.slit_length_unit = unit
378	elif tagname == 'x' and self.parent_class == 'offset':
379	self.detector.offset.x = data_point
380	self.detector.offset_unit = unit
381	elif tagname == 'y' and self.parent_class == 'offset':
382	self.detector.offset.y = data_point
383	self.detector.offset_unit = unit
384	elif tagname == 'z' and self.parent_class == 'offset':
385	self.detector.offset.z = data_point
386	self.detector.offset_unit = unit
387	elif tagname == 'x' and self.parent_class == 'beam_center':
388	self.detector.beam_center.x = data_point
389	self.detector.beam_center_unit = unit
390	elif tagname == 'y' and self.parent_class == 'beam_center':
391	self.detector.beam_center.y = data_point
392	self.detector.beam_center_unit = unit
393	elif tagname == 'z' and self.parent_class == 'beam_center':
394	self.detector.beam_center.z = data_point
395	self.detector.beam_center_unit = unit
396	elif tagname == 'x' and self.parent_class == 'pixel_size':
397	self.detector.pixel_size.x = data_point
398	self.detector.pixel_size_unit = unit
399	elif tagname == 'y' and self.parent_class == 'pixel_size':
400	self.detector.pixel_size.y = data_point
401	self.detector.pixel_size_unit = unit
402	elif tagname == 'z' and self.parent_class == 'pixel_size':
403	self.detector.pixel_size.z = data_point
404	self.detector.pixel_size_unit = unit
405	elif tagname == 'roll' and self.parent_class == 'orientation' and 'SASdetector' in self.names:
406	self.detector.orientation.x = data_point
407	self.detector.orientation_unit = unit
408	elif tagname == 'pitch' and self.parent_class == 'orientation' and 'SASdetector' in self.names:
409	self.detector.orientation.y = data_point
410	self.detector.orientation_unit = unit
411	elif tagname == 'yaw' and self.parent_class == 'orientation' and 'SASdetector' in self.names:
412	self.detector.orientation.z = data_point
413	self.detector.orientation_unit = unit
414
415	# Collimation and Aperture
416	elif tagname == 'length' and self.parent_class == 'SAScollimation':
417	self.collimation.length = data_point
418	self.collimation.length_unit = unit
419	elif tagname == 'name' and self.parent_class == 'SAScollimation':
420	self.collimation.name = data_point
421	elif tagname == 'distance' and self.parent_class == 'aperture':
422	self.aperture.distance = data_point
423	self.aperture.distance_unit = unit
424	elif tagname == 'x' and self.parent_class == 'size':
425	self.aperture.size.x = data_point
426	self.collimation.size_unit = unit
427	elif tagname == 'y' and self.parent_class == 'size':
428	self.aperture.size.y = data_point
429	self.collimation.size_unit = unit
430	elif tagname == 'z' and self.parent_class == 'size':
431	self.aperture.size.z = data_point
432	self.collimation.size_unit = unit
433
434	# Process Information
435	elif tagname == 'name' and self.parent_class == 'SASprocess':
436	self.process.name = data_point
437	elif tagname == 'description' and self.parent_class == 'SASprocess':
438	self.process.description = data_point
439	elif tagname == 'date' and self.parent_class == 'SASprocess':
440	try:
441	self.process.date = datetime.datetime.fromtimestamp(data_point)
442	except:
443	self.process.date = data_point
444	elif tagname == 'SASprocessnote':
445	self.process.notes.append(data_point)
446	elif tagname == 'term' and self.parent_class == 'SASprocess':
447	unit = attr.get("unit", "")
448	dic = { "name": name, "value": data_point, "unit": unit }
449	self.process.term.append(dic)
450
451	# Transmission Spectrum
452	elif tagname == 'T' and self.parent_class == 'Tdata':
453	self.transspectrum.transmission = np.append(self.transspectrum.transmission, data_point)
454	self.transspectrum.transmission_unit = unit
455	elif tagname == 'Tdev' and self.parent_class == 'Tdata':
456	self.transspectrum.transmission_deviation = np.append(self.transspectrum.transmission_deviation, data_point)
457	self.transspectrum.transmission_deviation_unit = unit
458	elif tagname == 'Lambda' and self.parent_class == 'Tdata':
459	self.transspectrum.wavelength = np.append(self.transspectrum.wavelength, data_point)
460	self.transspectrum.wavelength_unit = unit
461
462	# Source Information
463	elif tagname == 'wavelength' and (self.parent_class == 'SASsource' or self.parent_class == 'SASData'):
464	self.current_datainfo.source.wavelength = data_point
465	self.current_datainfo.source.wavelength_unit = unit
466	elif tagname == 'wavelength_min' and self.parent_class == 'SASsource':
467	self.current_datainfo.source.wavelength_min = data_point
468	self.current_datainfo.source.wavelength_min_unit = unit
469	elif tagname == 'wavelength_max' and self.parent_class == 'SASsource':
470	self.current_datainfo.source.wavelength_max = data_point
471	self.current_datainfo.source.wavelength_max_unit = unit
472	elif tagname == 'wavelength_spread' and self.parent_class == 'SASsource':
473	self.current_datainfo.source.wavelength_spread = data_point
474	self.current_datainfo.source.wavelength_spread_unit = unit
475	elif tagname == 'x' and self.parent_class == 'beam_size':
476	self.current_datainfo.source.beam_size.x = data_point
477	self.current_datainfo.source.beam_size_unit = unit
478	elif tagname == 'y' and self.parent_class == 'beam_size':
479	self.current_datainfo.source.beam_size.y = data_point
480	self.current_datainfo.source.beam_size_unit = unit
481	elif tagname == 'z' and self.parent_class == 'pixel_size':
482	self.current_datainfo.source.data_point.z = data_point
483	self.current_datainfo.source.beam_size_unit = unit
484	elif tagname == 'radiation' and self.parent_class == 'SASsource':
485	self.current_datainfo.source.radiation = data_point
486	elif tagname == 'beam_shape' and self.parent_class == 'SASsource':
487	self.current_datainfo.source.beam_shape = data_point
488
489	# Everything else goes in meta_data
490	else:
491	new_key = self._create_unique_key(self.current_datainfo.meta_data, tagname)
492	self.current_datainfo.meta_data[new_key] = data_point
493
494	self.names.remove(tagname_original)
495	length = 0
496	if len(self.names) > 1:
497	length = len(self.names) - 1
498	self.parent_class = self.names[length]
499	if not self._is_call_local() and not recurse:
500	self.frm = ""
501	self.current_datainfo.errors = set()
502	for error in self.errors:
503	self.current_datainfo.errors.add(error)
504	self.data_cleanup()
505	self.sort_one_d_data()
506	self.sort_two_d_data()
507	self.reset_data_list()
508	empty = None
509	return self.output[0], empty
510
511	def data_cleanup(self):
512	"""
513	Clean up the data sets and refresh everything
514	:return: None
515	"""
516	has_error_dx = self.current_dataset.dx is not None
517	has_error_dy = self.current_dataset.dy is not None
518	self.remove_empty_q_values(has_error_dx=has_error_dx,
519	has_error_dy=has_error_dy)
520	self.send_to_output() # Combine datasets with DataInfo
521	self.current_datainfo = DataInfo() # Reset DataInfo
522
523	def _is_call_local(self):
524	if self.frm == "":
525	inter = inspect.stack()
526	self.frm = inter[2]
527	mod_name = self.frm[1].replace("\\", "/").replace(".pyc", "")
528	mod_name = mod_name.replace(".py", "")
529	mod = mod_name.split("sas/")
530	mod_name = mod[1]
531	if mod_name != "sascalc/dataloader/readers/cansas_reader":
532	return False
533	return True
534
535	def _add_intermediate(self):
536	"""
537	This method stores any intermediate objects within the final data set after fully reading the set.
538	"""
539	if self.parent_class == 'SASprocess':
540	self.current_datainfo.process.append(self.process)
541	self.process = Process()
542	elif self.parent_class == 'SASdetector':
543	self.current_datainfo.detector.append(self.detector)
544	self.detector = Detector()
545	elif self.parent_class == 'SAStransmission_spectrum':
546	self.current_datainfo.trans_spectrum.append(self.transspectrum)
547	self.transspectrum = TransmissionSpectrum()
548	elif self.parent_class == 'SAScollimation':
549	self.current_datainfo.collimation.append(self.collimation)
550	self.collimation = Collimation()
551	elif self.parent_class == 'aperture':
552	self.collimation.aperture.append(self.aperture)
553	self.aperture = Aperture()
554	elif self.parent_class == 'SASdata':
555	self._check_for_empty_resolution()
556	self.data.append(self.current_dataset)
557
558	def _get_node_value(self, node, tagname):
559	"""
560	Get the value of a node and any applicable units
561
562	:param node: The XML node to get the value of
563	:param tagname: The tagname of the node
564	"""
565	#Get the text from the node and convert all whitespace to spaces
566	units = ''
567	node_value = node.text
568	if node_value is not None:
569	node_value = ' '.join(node_value.split())
570	else:
571	node_value = ""
572
573	# If the value is a float, compile with units.
574	if self.ns_list.ns_datatype == "float":
575	# If an empty value is given, set as zero.
576	if node_value is None or node_value.isspace() \
577	or node_value.lower() == "nan":
578	node_value = "0.0"
579	#Convert the value to the base units
580	node_value, units = self._unit_conversion(node, tagname, node_value)
581
582	# If the value is a timestamp, convert to a datetime object
583	elif self.ns_list.ns_datatype == "timestamp":
584	if node_value is None or node_value.isspace():
585	pass
586	else:
587	try:
588	node_value = \
589	datetime.datetime.fromtimestamp(node_value)
590	except ValueError:
591	node_value = None
592	return node_value, units
593
594	def _unit_conversion(self, node, tagname, node_value):
595	"""
596	A unit converter method used to convert the data included in the file
597	to the default units listed in data_info
598
599	:param node: XML node
600	:param tagname: name of the node
601	:param node_value: The value of the current dom node
602	"""
603	attr = node.attrib
604	value_unit = ''
605	err_msg = None
606	default_unit = None
607	if not isinstance(node_value, float):
608	node_value = float(node_value)
609	if 'unit' in attr and attr.get('unit') is not None:
610	try:
611	local_unit = attr['unit']
612	unitname = self.ns_list.current_level.get("unit", "")
613	if "SASdetector" in self.names:
614	save_in = "detector"
615	elif "aperture" in self.names:
616	save_in = "aperture"
617	elif "SAScollimation" in self.names:
618	save_in = "collimation"
619	elif "SAStransmission_spectrum" in self.names:
620	save_in = "transspectrum"
621	elif "SASdata" in self.names:
622	x = np.zeros(1)
623	y = np.zeros(1)
624	self.current_data1d = Data1D(x, y)
625	save_in = "current_data1d"
626	elif "SASsource" in self.names:
627	save_in = "current_datainfo.source"
628	elif "SASsample" in self.names:
629	save_in = "current_datainfo.sample"
630	elif "SASprocess" in self.names:
631	save_in = "process"
632	else:
633	save_in = "current_datainfo"
634	exec "default_unit = self.{0}.{1}".format(save_in, unitname)
635	if local_unit and default_unit and local_unit.lower() != default_unit.lower() \
636	and local_unit.lower() != "none":
637	if HAS_CONVERTER == True:
638	# Check local units - bad units raise KeyError
639	data_conv_q = Converter(local_unit)
640	value_unit = default_unit
641	node_value = data_conv_q(node_value, units=default_unit)
642	else:
643	value_unit = local_unit
644	err_msg = "Unit converter is not available.\n"
645	else:
646	value_unit = local_unit
647	except KeyError:
648	# Do not throw an error for loading Sesans data in cansas xml
649	# This is a temporary fix.
650	if local_unit != "A" and local_unit != 'pol':
651	err_msg = "CanSAS reader: unexpected "
652	err_msg += "\"{0}\" unit [{1}]; "
653	err_msg = err_msg.format(tagname, local_unit)
654	err_msg += "expecting [{0}]".format(default_unit)
655	value_unit = local_unit
656	except:
657	err_msg = "CanSAS reader: unknown error converting "
658	err_msg += "\"{0}\" unit [{1}]"
659	err_msg = err_msg.format(tagname, local_unit)
660	value_unit = local_unit
661	elif 'unit' in attr:
662	value_unit = attr['unit']
663	if err_msg:
664	self.errors.add(err_msg)
665	return node_value, value_unit
666
667	def _check_for_empty_resolution(self):
668	"""
669	a method to check all resolution data sets are the same size as I and q
670	"""
671	dql_exists = False
672	dqw_exists = False
673	dq_exists = False
674	di_exists = False
675	if self.current_dataset.dxl is not None:
676	dql_exists = True
677	if self.current_dataset.dxw is not None:
678	dqw_exists = True
679	if self.current_dataset.dx is not None:
680	dq_exists = True
681	if self.current_dataset.dy is not None:
682	di_exists = True
683	if dqw_exists and not dql_exists:
684	array_size = self.current_dataset.dxw.size - 1
685	self.current_dataset.dxl = np.append(self.current_dataset.dxl,
686	np.zeros([array_size]))
687	elif dql_exists and not dqw_exists:
688	array_size = self.current_dataset.dxl.size - 1
689	self.current_dataset.dxw = np.append(self.current_dataset.dxw,
690	np.zeros([array_size]))
691	elif not dql_exists and not dqw_exists and not dq_exists:
692	array_size = self.current_dataset.x.size - 1
693	self.current_dataset.dx = np.append(self.current_dataset.dx,
694	np.zeros([array_size]))
695	if not di_exists:
696	array_size = self.current_dataset.y.size - 1
697	self.current_dataset.dy = np.append(self.current_dataset.dy,
698	np.zeros([array_size]))
699
700	def _initialize_new_data_set(self, node=None):
701	if node is not None:
702	for child in node:
703	if child.tag.replace(self.base_ns, "") == "Idata":
704	for i_child in child:
705	if i_child.tag.replace(self.base_ns, "") == "Qx":
706	self.current_dataset = plottable_2D()
707	return
708	self.current_dataset = plottable_1D(np.array(0), np.array(0))
709
710	## Writing Methods
711	def write(self, filename, datainfo):
712	"""
713	Write the content of a Data1D as a CanSAS XML file
714
715	:param filename: name of the file to write
716	:param datainfo: Data1D object
717	"""
718	# Create XML document
719	doc, _ = self._to_xml_doc(datainfo)
720	# Write the file
721	file_ref = open(filename, 'w')
722	if self.encoding is None:
723	self.encoding = "UTF-8"
724	doc.write(file_ref, encoding=self.encoding,
725	pretty_print=True, xml_declaration=True)
726	file_ref.close()
727
728	def _to_xml_doc(self, datainfo):
729	"""
730	Create an XML document to contain the content of a Data1D
731
732	:param datainfo: Data1D object
733	"""
734	is_2d = False
735	if issubclass(datainfo.__class__, Data2D):
736	is_2d = True
737
738	# Get PIs and create root element
739	pi_string = self._get_pi_string()
740	# Define namespaces and create SASroot object
741	main_node = self._create_main_node()
742	# Create ElementTree, append SASroot and apply processing instructions
743	base_string = pi_string + self.to_string(main_node)
744	base_element = self.create_element_from_string(base_string)
745	doc = self.create_tree(base_element)
746	# Create SASentry Element
747	entry_node = self.create_element("SASentry")
748	root = doc.getroot()
749	root.append(entry_node)
750
751	# Add Title to SASentry
752	self.write_node(entry_node, "Title", datainfo.title)
753	# Add Run to SASentry
754	self._write_run_names(datainfo, entry_node)
755	# Add Data info to SASEntry
756	if is_2d:
757	self._write_data_2d(datainfo, entry_node)
758	else:
759	self._write_data(datainfo, entry_node)
760	# Transmission Spectrum Info
761	# TODO: fix the writer to linearize all data, including T_spectrum
762	# self._write_trans_spectrum(datainfo, entry_node)
763	# Sample info
764	self._write_sample_info(datainfo, entry_node)
765	# Instrument info
766	instr = self._write_instrument(datainfo, entry_node)
767	# Source
768	self._write_source(datainfo, instr)
769	# Collimation
770	self._write_collimation(datainfo, instr)
771	# Detectors
772	self._write_detectors(datainfo, instr)
773	# Processes info
774	self._write_process_notes(datainfo, entry_node)
775	# Note info
776	self._write_notes(datainfo, entry_node)
777	# Return the document, and the SASentry node associated with
778	# the data we just wrote
779	# If the calling function was not the cansas reader, return a minidom
780	# object rather than an lxml object.
781	self.frm = inspect.stack()[1]
782	doc, entry_node = self._check_origin(entry_node, doc)
783	return doc, entry_node
784
785	def write_node(self, parent, name, value, attr=None):
786	"""
787	:param doc: document DOM
788	:param parent: parent node
789	:param name: tag of the element
790	:param value: value of the child text node
791	:param attr: attribute dictionary
792
793	:return: True if something was appended, otherwise False
794	"""
795	if value is not None:
796	parent = self.ebuilder(parent, name, value, attr)
797	return True
798	return False
799
800	def _get_pi_string(self):
801	"""
802	Creates the processing instructions header for writing to file
803	"""
804	pis = self.return_processing_instructions()
805	if len(pis) > 0:
806	pi_tree = self.create_tree(pis[0])
807	i = 1
808	for i in range(1, len(pis) - 1):
809	pi_tree = self.append(pis[i], pi_tree)
810	pi_string = self.to_string(pi_tree)
811	else:
812	pi_string = ""
813	return pi_string
814
815	def _create_main_node(self):
816	"""
817	Creates the primary xml header used when writing to file
818	"""
819	xsi = "http://www.w3.org/2001/XMLSchema-instance"
820	version = self.cansas_version
821	n_s = CANSAS_NS.get(version).get("ns")
822	if version == "1.1":
823	url = "http://www.cansas.org/formats/1.1/"
824	else:
825	url = "http://svn.smallangles.net/svn/canSAS/1dwg/trunk/"
826	schema_location = "{0} {1}cansas1d.xsd".format(n_s, url)
827	attrib = {"{" + xsi + "}schemaLocation" : schema_location,
828	"version" : version}
829	nsmap = {'xsi' : xsi, None: n_s}
830
831	main_node = self.create_element("{" + n_s + "}SASroot",
832	attrib=attrib, nsmap=nsmap)
833	return main_node
834
835	def _write_run_names(self, datainfo, entry_node):
836	"""
837	Writes the run names to the XML file
838
839	:param datainfo: The Data1D object the information is coming from
840	:param entry_node: lxml node ElementTree object to be appended to
841	"""
842	if datainfo.run is None or datainfo.run == []:
843	datainfo.run.append(RUN_NAME_DEFAULT)
844	datainfo.run_name[RUN_NAME_DEFAULT] = RUN_NAME_DEFAULT
845	for item in datainfo.run:
846	runname = {}
847	if item in datainfo.run_name and \
848	len(str(datainfo.run_name[item])) > 1:
849	runname = {'name': datainfo.run_name[item]}
850	self.write_node(entry_node, "Run", item, runname)
851
852	def _write_data(self, datainfo, entry_node):
853	"""
854	Writes 1D I and Q data to the XML file
855
856	:param datainfo: The Data1D object the information is coming from
857	:param entry_node: lxml node ElementTree object to be appended to
858	"""
859	node = self.create_element("SASdata")
860	self.append(node, entry_node)
861
862	for i in range(len(datainfo.x)):
863	point = self.create_element("Idata")
864	node.append(point)
865	self.write_node(point, "Q", datainfo.x[i],
866	{'unit': datainfo.x_unit})
867	if len(datainfo.y) >= i:
868	self.write_node(point, "I", datainfo.y[i],
869	{'unit': datainfo.y_unit})
870	if datainfo.dy is not None and len(datainfo.dy) > i:
871	self.write_node(point, "Idev", datainfo.dy[i],
872	{'unit': datainfo.y_unit})
873	if datainfo.dx is not None and len(datainfo.dx) > i:
874	self.write_node(point, "Qdev", datainfo.dx[i],
875	{'unit': datainfo.x_unit})
876	if datainfo.dxw is not None and len(datainfo.dxw) > i:
877	self.write_node(point, "dQw", datainfo.dxw[i],
878	{'unit': datainfo.x_unit})
879	if datainfo.dxl is not None and len(datainfo.dxl) > i:
880	self.write_node(point, "dQl", datainfo.dxl[i],
881	{'unit': datainfo.x_unit})
882	if datainfo.isSesans:
883	sesans_attrib = {'x_axis': datainfo._xaxis,
884	'y_axis': datainfo._yaxis,
885	'x_unit': datainfo.x_unit,
886	'y_unit': datainfo.y_unit}
887	sesans = self.create_element("Sesans", attrib=sesans_attrib)
888	sesans.text = str(datainfo.isSesans)
889	entry_node.append(sesans)
890	self.write_node(entry_node, "yacceptance", datainfo.sample.yacceptance[0],
891	{'unit': datainfo.sample.yacceptance[1]})
892	self.write_node(entry_node, "zacceptance", datainfo.sample.zacceptance[0],
893	{'unit': datainfo.sample.zacceptance[1]})
894
895
896	def _write_data_2d(self, datainfo, entry_node):
897	"""
898	Writes 2D data to the XML file
899
900	:param datainfo: The Data2D object the information is coming from
901	:param entry_node: lxml node ElementTree object to be appended to
902	"""
903	attr = {}
904	if datainfo.data.shape:
905	attr["x_bins"] = str(len(datainfo.x_bins))
906	attr["y_bins"] = str(len(datainfo.y_bins))
907	node = self.create_element("SASdata", attr)
908	self.append(node, entry_node)
909
910	point = self.create_element("Idata")
911	node.append(point)
912	qx = ','.join([str(datainfo.qx_data[i]) for i in xrange(len(datainfo.qx_data))])
913	qy = ','.join([str(datainfo.qy_data[i]) for i in xrange(len(datainfo.qy_data))])
914	intensity = ','.join([str(datainfo.data[i]) for i in xrange(len(datainfo.data))])
915
916	self.write_node(point, "Qx", qx,
917	{'unit': datainfo._xunit})
918	self.write_node(point, "Qy", qy,
919	{'unit': datainfo._yunit})
920	self.write_node(point, "I", intensity,
921	{'unit': datainfo._zunit})
922	if datainfo.err_data is not None:
923	err = ','.join([str(datainfo.err_data[i]) for i in
924	xrange(len(datainfo.err_data))])
925	self.write_node(point, "Idev", err,
926	{'unit': datainfo._zunit})
927	if datainfo.dqy_data is not None:
928	dqy = ','.join([str(datainfo.dqy_data[i]) for i in
929	xrange(len(datainfo.dqy_data))])
930	self.write_node(point, "Qydev", dqy,
931	{'unit': datainfo._yunit})
932	if datainfo.dqx_data is not None:
933	dqx = ','.join([str(datainfo.dqx_data[i]) for i in
934	xrange(len(datainfo.dqx_data))])
935	self.write_node(point, "Qxdev", dqx,
936	{'unit': datainfo._xunit})
937	if datainfo.mask is not None:
938	mask = ','.join(
939	["1" if datainfo.mask[i] else "0"
940	for i in xrange(len(datainfo.mask))])
941	self.write_node(point, "Mask", mask)
942
943	def _write_trans_spectrum(self, datainfo, entry_node):
944	"""
945	Writes the transmission spectrum data to the XML file
946
947	:param datainfo: The Data1D object the information is coming from
948	:param entry_node: lxml node ElementTree object to be appended to
949	"""
950	for i in range(len(datainfo.trans_spectrum)):
951	spectrum = datainfo.trans_spectrum[i]
952	node = self.create_element("SAStransmission_spectrum",
953	{"name" : spectrum.name})
954	self.append(node, entry_node)
955	if isinstance(spectrum.timestamp, datetime.datetime):
956	node.setAttribute("timestamp", spectrum.timestamp)
957	for i in range(len(spectrum.wavelength)):
958	point = self.create_element("Tdata")
959	node.append(point)
960	self.write_node(point, "Lambda", spectrum.wavelength[i],
961	{'unit': spectrum.wavelength_unit})
962	self.write_node(point, "T", spectrum.transmission[i],
963	{'unit': spectrum.transmission_unit})
964	if spectrum.transmission_deviation is not None \
965	and len(spectrum.transmission_deviation) >= i:
966	self.write_node(point, "Tdev",
967	spectrum.transmission_deviation[i],
968	{'unit':
969	spectrum.transmission_deviation_unit})
970
971	def _write_sample_info(self, datainfo, entry_node):
972	"""
973	Writes the sample information to the XML file
974
975	:param datainfo: The Data1D object the information is coming from
976	:param entry_node: lxml node ElementTree object to be appended to
977	"""
978	sample = self.create_element("SASsample")
979	if datainfo.sample.name is not None:
980	self.write_attribute(sample, "name",
981	str(datainfo.sample.name))
982	self.append(sample, entry_node)
983	self.write_node(sample, "ID", str(datainfo.sample.ID))
984	self.write_node(sample, "thickness", datainfo.sample.thickness,
985	{"unit": datainfo.sample.thickness_unit})
986	self.write_node(sample, "transmission", datainfo.sample.transmission)
987	self.write_node(sample, "temperature", datainfo.sample.temperature,
988	{"unit": datainfo.sample.temperature_unit})
989
990	pos = self.create_element("position")
991	written = self.write_node(pos,
992	"x",
993	datainfo.sample.position.x,
994	{"unit": datainfo.sample.position_unit})
995	written = written \| self.write_node( \
996	pos, "y", datainfo.sample.position.y,
997	{"unit": datainfo.sample.position_unit})
998	written = written \| self.write_node( \
999	pos, "z", datainfo.sample.position.z,
1000	{"unit": datainfo.sample.position_unit})
1001	if written == True:
1002	self.append(pos, sample)
1003
1004	ori = self.create_element("orientation")
1005	written = self.write_node(ori, "roll",
1006	datainfo.sample.orientation.x,
1007	{"unit": datainfo.sample.orientation_unit})
1008	written = written \| self.write_node( \
1009	ori, "pitch", datainfo.sample.orientation.y,
1010	{"unit": datainfo.sample.orientation_unit})
1011	written = written \| self.write_node( \
1012	ori, "yaw", datainfo.sample.orientation.z,
1013	{"unit": datainfo.sample.orientation_unit})
1014	if written == True:
1015	self.append(ori, sample)
1016
1017	for item in datainfo.sample.details:
1018	self.write_node(sample, "details", item)
1019
1020	def _write_instrument(self, datainfo, entry_node):
1021	"""
1022	Writes the instrumental information to the XML file
1023
1024	:param datainfo: The Data1D object the information is coming from
1025	:param entry_node: lxml node ElementTree object to be appended to
1026	"""
1027	instr = self.create_element("SASinstrument")
1028	self.append(instr, entry_node)
1029	self.write_node(instr, "name", datainfo.instrument)
1030	return instr
1031
1032	def _write_source(self, datainfo, instr):
1033	"""
1034	Writes the source information to the XML file
1035
1036	:param datainfo: The Data1D object the information is coming from
1037	:param instr: instrument node to be appended to
1038	"""
1039	source = self.create_element("SASsource")
1040	if datainfo.source.name is not None:
1041	self.write_attribute(source, "name",
1042	str(datainfo.source.name))
1043	self.append(source, instr)
1044	if datainfo.source.radiation is None or datainfo.source.radiation == '':
1045	datainfo.source.radiation = "neutron"
1046	self.write_node(source, "radiation", datainfo.source.radiation)
1047
1048	size = self.create_element("beam_size")
1049	if datainfo.source.beam_size_name is not None:
1050	self.write_attribute(size, "name",
1051	str(datainfo.source.beam_size_name))
1052	written = self.write_node( \
1053	size, "x", datainfo.source.beam_size.x,
1054	{"unit": datainfo.source.beam_size_unit})
1055	written = written \| self.write_node( \
1056	size, "y", datainfo.source.beam_size.y,
1057	{"unit": datainfo.source.beam_size_unit})
1058	written = written \| self.write_node( \
1059	size, "z", datainfo.source.beam_size.z,
1060	{"unit": datainfo.source.beam_size_unit})
1061	if written == True:
1062	self.append(size, source)
1063
1064	self.write_node(source, "beam_shape", datainfo.source.beam_shape)
1065	self.write_node(source, "wavelength",
1066	datainfo.source.wavelength,
1067	{"unit": datainfo.source.wavelength_unit})
1068	self.write_node(source, "wavelength_min",
1069	datainfo.source.wavelength_min,
1070	{"unit": datainfo.source.wavelength_min_unit})
1071	self.write_node(source, "wavelength_max",
1072	datainfo.source.wavelength_max,
1073	{"unit": datainfo.source.wavelength_max_unit})
1074	self.write_node(source, "wavelength_spread",
1075	datainfo.source.wavelength_spread,
1076	{"unit": datainfo.source.wavelength_spread_unit})
1077
1078	def _write_collimation(self, datainfo, instr):
1079	"""
1080	Writes the collimation information to the XML file
1081
1082	:param datainfo: The Data1D object the information is coming from
1083	:param instr: lxml node ElementTree object to be appended to
1084	"""
1085	if datainfo.collimation == [] or datainfo.collimation is None:
1086	coll = Collimation()
1087	datainfo.collimation.append(coll)
1088	for item in datainfo.collimation:
1089	coll = self.create_element("SAScollimation")
1090	if item.name is not None:
1091	self.write_attribute(coll, "name", str(item.name))
1092	self.append(coll, instr)
1093
1094	self.write_node(coll, "length", item.length,
1095	{"unit": item.length_unit})
1096
1097	for aperture in item.aperture:
1098	apert = self.create_element("aperture")
1099	if aperture.name is not None:
1100	self.write_attribute(apert, "name", str(aperture.name))
1101	if aperture.type is not None:
1102	self.write_attribute(apert, "type", str(aperture.type))
1103	self.append(apert, coll)
1104
1105	size = self.create_element("size")
1106	if aperture.size_name is not None:
1107	self.write_attribute(size, "name",
1108	str(aperture.size_name))
1109	written = self.write_node(size, "x", aperture.size.x,
1110	{"unit": aperture.size_unit})
1111	written = written \| self.write_node( \
1112	size, "y", aperture.size.y,
1113	{"unit": aperture.size_unit})
1114	written = written \| self.write_node( \
1115	size, "z", aperture.size.z,
1116	{"unit": aperture.size_unit})
1117	if written == True:
1118	self.append(size, apert)
1119
1120	self.write_node(apert, "distance", aperture.distance,
1121	{"unit": aperture.distance_unit})
1122
1123	def _write_detectors(self, datainfo, instr):
1124	"""
1125	Writes the detector information to the XML file
1126
1127	:param datainfo: The Data1D object the information is coming from
1128	:param inst: lxml instrument node to be appended to
1129	"""
1130	if datainfo.detector is None or datainfo.detector == []:
1131	det = Detector()
1132	det.name = ""
1133	datainfo.detector.append(det)
1134
1135	for item in datainfo.detector:
1136	det = self.create_element("SASdetector")
1137	written = self.write_node(det, "name", item.name)
1138	written = written \| self.write_node(det, "SDD", item.distance,
1139	{"unit": item.distance_unit})
1140	if written == True:
1141	self.append(det, instr)
1142
1143	off = self.create_element("offset")
1144	written = self.write_node(off, "x", item.offset.x,
1145	{"unit": item.offset_unit})
1146	written = written \| self.write_node(off, "y", item.offset.y,
1147	{"unit": item.offset_unit})
1148	written = written \| self.write_node(off, "z", item.offset.z,
1149	{"unit": item.offset_unit})
1150	if written == True:
1151	self.append(off, det)
1152
1153	ori = self.create_element("orientation")
1154	written = self.write_node(ori, "roll", item.orientation.x,
1155	{"unit": item.orientation_unit})
1156	written = written \| self.write_node(ori, "pitch",
1157	item.orientation.y,
1158	{"unit": item.orientation_unit})
1159	written = written \| self.write_node(ori, "yaw",
1160	item.orientation.z,
1161	{"unit": item.orientation_unit})
1162	if written == True:
1163	self.append(ori, det)
1164
1165	center = self.create_element("beam_center")
1166	written = self.write_node(center, "x", item.beam_center.x,
1167	{"unit": item.beam_center_unit})
1168	written = written \| self.write_node(center, "y",
1169	item.beam_center.y,
1170	{"unit": item.beam_center_unit})
1171	written = written \| self.write_node(center, "z",
1172	item.beam_center.z,
1173	{"unit": item.beam_center_unit})
1174	if written == True:
1175	self.append(center, det)
1176
1177	pix = self.create_element("pixel_size")
1178	written = self.write_node(pix, "x", item.pixel_size.x,
1179	{"unit": item.pixel_size_unit})
1180	written = written \| self.write_node(pix, "y", item.pixel_size.y,
1181	{"unit": item.pixel_size_unit})
1182	written = written \| self.write_node(pix, "z", item.pixel_size.z,
1183	{"unit": item.pixel_size_unit})
1184	if written == True:
1185	self.append(pix, det)
1186	self.write_node(det, "slit_length", item.slit_length,
1187	{"unit": item.slit_length_unit})
1188
1189
1190	def _write_process_notes(self, datainfo, entry_node):
1191	"""
1192	Writes the process notes to the XML file
1193
1194	:param datainfo: The Data1D object the information is coming from
1195	:param entry_node: lxml node ElementTree object to be appended to
1196
1197	"""
1198	for item in datainfo.process:
1199	node = self.create_element("SASprocess")
1200	self.append(node, entry_node)
1201	self.write_node(node, "name", item.name)
1202	self.write_node(node, "date", item.date)
1203	self.write_node(node, "description", item.description)
1204	for term in item.term:
1205	if isinstance(term, list):
1206	value = term['value']
1207	del term['value']
1208	elif isinstance(term, dict):
1209	value = term.get("value")
1210	del term['value']
1211	else:
1212	value = term
1213	self.write_node(node, "term", value, term)
1214	for note in item.notes:
1215	self.write_node(node, "SASprocessnote", note)
1216	if len(item.notes) == 0:
1217	self.write_node(node, "SASprocessnote", "")
1218
1219	def _write_notes(self, datainfo, entry_node):
1220	"""
1221	Writes the notes to the XML file and creates an empty note if none
1222	exist
1223
1224	:param datainfo: The Data1D object the information is coming from
1225	:param entry_node: lxml node ElementTree object to be appended to
1226
1227	"""
1228	if len(datainfo.notes) == 0:
1229	node = self.create_element("SASnote")
1230	self.append(node, entry_node)
1231	else:
1232	for item in datainfo.notes:
1233	node = self.create_element("SASnote")
1234	self.write_text(node, item)
1235	self.append(node, entry_node)
1236
1237	def _check_origin(self, entry_node, doc):
1238	"""
1239	Return the document, and the SASentry node associated with
1240	the data we just wrote.
1241	If the calling function was not the cansas reader, return a minidom
1242	object rather than an lxml object.
1243
1244	:param entry_node: lxml node ElementTree object to be appended to
1245	:param doc: entire xml tree
1246	"""
1247	if not self.frm:
1248	self.frm = inspect.stack()[1]
1249	mod_name = self.frm[1].replace("\\", "/").replace(".pyc", "")
1250	mod_name = mod_name.replace(".py", "")
1251	mod = mod_name.split("sas/")
1252	mod_name = mod[1]
1253	if mod_name != "sascalc/dataloader/readers/cansas_reader":
1254	string = self.to_string(doc, pretty_print=False)
1255	doc = parseString(string)
1256	node_name = entry_node.tag
1257	node_list = doc.getElementsByTagName(node_name)
1258	entry_node = node_list.item(0)
1259	return doc, entry_node
1260
1261	# DO NOT REMOVE - used in saving and loading panel states.
1262	def _store_float(self, location, node, variable, storage, optional=True):
1263	"""
1264	Get the content of a xpath location and store
1265	the result. Check that the units are compatible
1266	with the destination. The value is expected to
1267	be a float.
1268
1269	The xpath location might or might not exist.
1270	If it does not exist, nothing is done
1271
1272	:param location: xpath location to fetch
1273	:param node: node to read the data from
1274	:param variable: name of the data member to store it in [string]
1275	:param storage: data object that has the 'variable' data member
1276	:param optional: if True, no exception will be raised
1277	if unit conversion can't be done
1278
1279	:raise ValueError: raised when the units are not recognized
1280	"""
1281	entry = get_content(location, node)
1282	try:
1283	value = float(entry.text)
1284	except:
1285	value = None
1286
1287	if value is not None:
1288	# If the entry has units, check to see that they are
1289	# compatible with what we currently have in the data object
1290	units = entry.get('unit')
1291	if units is not None:
1292	toks = variable.split('.')
1293	local_unit = None
1294	exec "local_unit = storage.%s_unit" % toks[0]
1295	if local_unit is not None and units.lower() != local_unit.lower():
1296	if HAS_CONVERTER == True:
1297	try:
1298	conv = Converter(units)
1299	exec "storage.%s = %g" % \
1300	(variable, conv(value, units=local_unit))
1301	except:
1302	_, exc_value, _ = sys.exc_info()
1303	err_mess = "CanSAS reader: could not convert"
1304	err_mess += " %s unit [%s]; expecting [%s]\n %s" \
1305	% (variable, units, local_unit, exc_value)
1306	self.errors.add(err_mess)
1307	if optional:
1308	logger.info(err_mess)
1309	else:
1310	raise ValueError, err_mess
1311	else:
1312	err_mess = "CanSAS reader: unrecognized %s unit [%s];"\
1313	% (variable, units)
1314	err_mess += " expecting [%s]" % local_unit
1315	self.errors.add(err_mess)
1316	if optional:
1317	logger.info(err_mess)
1318	else:
1319	raise ValueError, err_mess
1320	else:
1321	exec "storage.%s = value" % variable
1322	else:
1323	exec "storage.%s = value" % variable
1324
1325	# DO NOT REMOVE - used in saving and loading panel states.
1326	def _store_content(self, location, node, variable, storage):
1327	"""
1328	Get the content of a xpath location and store
1329	the result. The value is treated as a string.
1330
1331	The xpath location might or might not exist.
1332	If it does not exist, nothing is done
1333
1334	:param location: xpath location to fetch
1335	:param node: node to read the data from
1336	:param variable: name of the data member to store it in [string]
1337	:param storage: data object that has the 'variable' data member
1338
1339	:return: return a list of errors
1340	"""
1341	entry = get_content(location, node)
1342	if entry is not None and entry.text is not None:
1343	exec "storage.%s = entry.text.strip()" % variable
1344
1345	# DO NOT REMOVE Called by outside packages:
1346	# sas.sasgui.perspectives.invariant.invariant_state
1347	# sas.sasgui.perspectives.fitting.pagestate
1348	def get_content(location, node):
1349	"""
1350	Get the first instance of the content of a xpath location.
1351
1352	:param location: xpath location
1353	:param node: node to start at
1354
1355	:return: Element, or None
1356	"""
1357	nodes = node.xpath(location,
1358	namespaces={'ns': CANSAS_NS.get("1.0").get("ns")})
1359	if len(nodes) > 0:
1360	return nodes[0]
1361	else:
1362	return None
1363
1364	# DO NOT REMOVE Called by outside packages:
1365	# sas.sasgui.perspectives.fitting.pagestate
1366	def write_node(doc, parent, name, value, attr=None):
1367	"""
1368	:param doc: document DOM
1369	:param parent: parent node
1370	:param name: tag of the element
1371	:param value: value of the child text node
1372	:param attr: attribute dictionary
1373
1374	:return: True if something was appended, otherwise False
1375	"""
1376	if attr is None:
1377	attr = {}
1378	if value is not None:
1379	node = doc.createElement(name)
1380	node.appendChild(doc.createTextNode(str(value)))
1381	for item in attr:
1382	node.setAttribute(item, attr[item])
1383	parent.appendChild(node)
1384	return True
1385	return False

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/src/sas/sascalc/dataloader/readers/cansas_reader.py @ e56f335

Download in other formats: