source: sasview/src/sas/sascalc/calculator/c_extensions/libfunc.c @ 1e13b53

// by jcho

#include <math.h>

#include "libfunc.h"

#include <stdio.h>



//used in Si func

int factorial(int i) {

        int k, j;
        if (i<2){
                return 1;
        }

        k=1;

        for(j=1;j<i;j++) {
                k=k*(j+1);
        }

        return k;

}



// Used in pearl nec model

// Sine integral function: approximated within 1%!!!

// integral of sin(x)/x up to namx term nmax=6 looks the best.

double Si(double x)

{
        int i;
        int nmax=6;
        double out;
        long double power;
        double pi = 4.0*atan(1.0);

        if (x >= pi*6.2/4.0){
                double out_sin = 0.0;
                double out_cos = 0.0;
                out = pi/2.0;

                for (i=0; i<nmax-2; i+=1) {
                        out_cos += pow(-1.0, i) * (double)factorial(2*i) / pow(x, 2*i+1);
                        out_sin += pow(-1.0, i) * (double)factorial(2*i+1) / pow(x, 2*i+2);
                }

                out -= cos(x) * out_cos;
                out -= sin(x) * out_sin;
                return out;
        }

        out = 0.0;

        for (i=0; i<nmax; i+=1) {
                if (i==0) {
                        out += x;
                        continue;
                }

                power = pow(x,(2 * i + 1));
                out += (double)pow(-1, i) * power / ((2.0 * (double)i + 1.0) * (double)factorial(2 * i + 1));

                //printf ("Si=%g %g %d\n", x, out, i);
        }

        return out;
}



double sinc(double x)
{
  if (x==0.0){
    return 1.0;
  }
  return sin(x)/x;
}

// calculate magnetic sld and return total sld
// bn : contrast (not just sld of the layer)
// m0: max mag of M; mtheta: angle from x-z plane;
// mphi: angle (anti-clock-wise)of x-z projection(M) from x axis
// spinfraci: the fraction of UP among UP+Down (before sample)
// spinfracf: the fraction of UP among UP+Down (after sample and before detector)
// spintheta: angle (anti-clock-wise) between neutron spin(up) and x axis
// Note: all angles are in degrees.
polar_sld cal_msld(int isangle, double qx, double qy, double bn,
                                double m01, double mtheta1, double mphi1,
                                double spinfraci, double spinfracf, double spintheta)
{
        //locals
        double q_x = qx;
        double q_y = qy;
        double sld = bn;
        int is_angle = isangle;
        double pi = 4.0*atan(1.0);
        double s_theta = spintheta * pi/180.0;
        double m_max = m01;
        double m_phi = mphi1;
        double m_theta = mtheta1;
        double in_spin = spinfraci;
        double out_spin = spinfracf;

        double m_perp = 0.0;
        double m_perp_z = 0.0;
        double m_perp_y = 0.0;
        double m_perp_x = 0.0;
        double m_sigma_x = 0.0;
        double m_sigma_z = 0.0;
        double m_sigma_y = 0.0;
        //double b_m = 0.0;
        double q_angle = 0.0;
        double mx = 0.0;
        double my = 0.0;
        double mz = 0.0;
        polar_sld p_sld;
        p_sld.uu = sld;
        p_sld.dd = sld;
        p_sld.re_ud = 0.0;
        p_sld.im_ud = 0.0;
        p_sld.re_du = 0.0;
        p_sld.im_du = 0.0;

        //No mag means no further calculation
        if (isangle>0){
                if (m_max < 1.0e-32){
                        p_sld.uu = sqrt(sqrt(in_spin * out_spin)) * p_sld.uu;
                        p_sld.dd = sqrt(sqrt((1.0 - in_spin) * (1.0 - out_spin))) * p_sld.dd;
                        return p_sld;
                }
        }
        else{
                if (fabs(m_max)< 1.0e-32 && fabs(m_phi)< 1.0e-32 && fabs(m_theta)< 1.0e-32){
                        p_sld.uu = sqrt(sqrt(in_spin * out_spin)) * p_sld.uu;
                        p_sld.dd = sqrt(sqrt((1.0 - in_spin) * (1.0 - out_spin))) * p_sld.dd;
                        return p_sld;
                }
        }

        //These are needed because of the precision of inputs
        if (in_spin < 0.0) in_spin = 0.0;
        if (in_spin > 1.0) in_spin = 1.0;
        if (out_spin < 0.0) out_spin = 0.0;
        if (out_spin > 1.0) out_spin = 1.0;

        if (q_x == 0.0) q_angle = pi / 2.0;
        else q_angle = atan(q_y/q_x);
        if (q_y < 0.0 && q_x < 0.0) q_angle -= pi;
        else if (q_y > 0.0 && q_x < 0.0) q_angle += pi;

        q_angle = pi/2.0 - q_angle;
        if (q_angle > pi) q_angle -= 2.0 * pi;
        else if (q_angle < -pi) q_angle += 2.0 * pi;

        if (fabs(q_x) < 1.0e-16 && fabs(q_y) < 1.0e-16){
                m_perp = 0.0;
                }
        else {
                m_perp = m_max;
                }
        if (is_angle > 0){
                m_phi *= pi/180.0;
                m_theta *= pi/180.0;
                mx = m_perp * cos(m_theta) * cos(m_phi);
                my = m_perp * sin(m_theta);
                mz = -(m_perp * cos(m_theta) * sin(m_phi));
        }
        else{
                mx = m_perp;
                my = m_phi;
                mz = m_theta;
        }
        //ToDo: simplify these steps
        // m_perp1 -m_perp2
        m_perp_x = (mx) *  cos(q_angle);
        m_perp_x -= (my) * sin(q_angle);
        m_perp_y = m_perp_x;
        m_perp_x *= cos(-q_angle);
        m_perp_y *= sin(-q_angle);
        m_perp_z = mz;

        m_sigma_x = (m_perp_x * cos(-s_theta) - m_perp_y * sin(-s_theta));
        m_sigma_y = (m_perp_x * sin(-s_theta) + m_perp_y * cos(-s_theta));
        m_sigma_z = (m_perp_z);

        //Find b
        p_sld.uu -= m_sigma_x;
        p_sld.dd += m_sigma_x;
        p_sld.re_ud = m_sigma_y;
        p_sld.re_du = m_sigma_y;
        p_sld.im_ud = m_sigma_z;
        p_sld.im_du = -m_sigma_z;

        p_sld.uu = sqrt(sqrt(in_spin * out_spin)) * p_sld.uu;
        p_sld.dd = sqrt(sqrt((1.0 - in_spin) * (1.0 - out_spin))) * p_sld.dd;

        p_sld.re_ud = sqrt(sqrt(in_spin * (1.0 - out_spin))) * p_sld.re_ud;
        p_sld.im_ud = sqrt(sqrt(in_spin * (1.0 - out_spin))) * p_sld.im_ud;
        p_sld.re_du = sqrt(sqrt((1.0 - in_spin) * out_spin)) * p_sld.re_du;
        p_sld.im_du = sqrt(sqrt((1.0 - in_spin) * out_spin)) * p_sld.im_du;

        return p_sld;
}


/** Modifications below by kieranrcampbell@gmail.com
    Institut Laue-Langevin, July 2012
**/

/**
Wojtek's comment Mar 22 2016: The remaing code can mostly likely be deleated
Keeping it in order to check if it is not breaking anything
**/

/*
#define ITMAX 100
#define EPS 3.0e-7
#define FPMIN 1.0e-30

void gser(float *gamser, float a, float x, float *gln) {
  int n;
  float sum,del,ap;

  *gln = lgamma(a);
  if(x <= 0.0) {
    if (x < 0.0) printf("Error: x less than 0 in routine gser");
    *gamser = 0.0;
    return;
  } else {
    ap = a;
    del = sum = 1.0/a;

    for(n=1;n<=ITMAX;n++) {
      ++ap;
      del *= x/ap;
      sum += del;
      if(fabs(del) < fabs(sum)*EPS) {
        *gamser = sum * exp(-x + a * log(x) - (*gln));
        return;
      }
    }
    printf("a too large, ITMAX too small in routine gser");
    return;

  }

}
*/
/**
   Implements the incomplete gamma function Q(a,x) evaluated by its continued fraction
   representation
**/
/*
void gcf(float *gammcf, float a, float x, float *gln) {
  int i;
  float an,b,c,d,del,h;

  *gln = lgamma(a);
  b = x+1.0-a;
  c = 1.0/FPMIN;
  d = 1.0/b;
  h=d;
  for (i=1;i <= ITMAX; i++) {
    an = -i*(i-a);
    b += 2.0;
    d = an*d + b;
    if (fabs(d) < FPMIN) d = FPMIN;
    c = b+an/c;
    if (fabs(c) < FPMIN) c = FPMIN;
    d = 1.0/d;
    del = d*c;
    h += del;
    if (fabs(del-1.0) < EPS) break;
  }
  if (i > ITMAX) printf("a too large, ITMAX too small in gcf");
  *gammcf = exp(-x+a*log(x)-(*gln))*h;
  return;
}
*/
/**
   Represents incomplete error function, P(a,x)
**/
/*
float gammp(float a, float x) {
  float gamser,gammcf,gln;
  if(x < 0.0 || a <= 0.0) printf("Invalid arguments in routine gammp");
  if (x < (a+1.0)) {
    gser(&gamser,a,x,&gln);
    return gamser;
  } else {
    gcf(&gammcf,a,x,&gln);
    return 1.0 - gammcf;
  }
}
*/
/**
    Implementation of the error function, erf(x)
**/
/*
float erff(float x) {
  return x < 0.0 ? -gammp(0.5,x*x) : gammp(0.5,x*x);
}
*/