source: sasview/src/sas/qtgui/Utilities/UnitTesting/GuiUtilsTest.py @ 36b09e8

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalc
Last change on this file since 36b09e8 was f4a1433, checked in by Piotr Rozyczko <rozyczko@…>, 7 years ago

Merge branch 'master' into ESS_GUI
  • Property mode set to 100644
File size: 15.0 KB
Line 
1import sys
2import unittest
3import webbrowser
4
5from PyQt4 import QtCore
6from PyQt4 import QtGui
7from mock import MagicMock
8
9# set up import paths
10import sas.qtgui.path_prepare
11
12# SV imports
13from sas.sascalc.dataloader.loader import Loader
14from sas.qtgui.MainWindow.DataManager import DataManager
15from sas.qtgui.Plotting.PlotterData import Data1D
16from sas.qtgui.Plotting.PlotterData import Data2D
17
18# Tested module
19from sas.qtgui.Utilities.GuiUtils import *
20
21if not QtGui.QApplication.instance():
22    app = QtGui.QApplication(sys.argv)
23
24class GuiUtilsTest(unittest.TestCase):
25    '''Test the GUI Utilities methods'''
26    def setUp(self):
27        '''Empty'''
28        pass
29
30    def tearDown(self):
31        '''Empty'''
32        pass
33
34    def testDefaults(self):
35        """
36        Test all the global constants defined in the file.
37        """
38        # Should probably test the constants in the file,
39        # but this will done after trimming down GuiUtils
40        # and retaining only necessary variables.
41        pass
42
43    def testGetAppDir(self):
44        """
45        """
46        pass
47
48    def testGetUserDirectory(self):
49        """
50        Simple test of user directory getter
51        """
52        home_dir = os.path.expanduser("~")
53        self.assertIn(home_dir, get_user_directory())
54
55    def testCommunicate(self):
56        """
57        Test the container class with signal definitions
58        """
59        com = Communicate()
60
61        # All defined signals
62        list_of_signals = [
63            'fileReadSignal',
64            'fileDataReceivedSignal',
65            'statusBarUpdateSignal',
66            'updatePerspectiveWithDataSignal',
67            'updateModelFromPerspectiveSignal',
68            'plotRequestedSignal',
69            'progressBarUpdateSignal',
70            'activeGraphName',
71            'sendDataToPanelSignal',
72            'updateModelFromDataOperationPanelSignal'
73        ]
74
75        # Assure all signals are defined.
76        for signal in list_of_signals:
77            self.assertIn(signal, dir(com))
78
79    def testupdateModelItem(self):
80        """
81        Test the generic QModelItem update method
82        """
83        test_item = QtGui.QStandardItem()
84        test_list = ['aa', 4, True, ]
85        name = "Black Sabbath"
86
87        # update the item
88        updateModelItem(test_item, test_list, name)
89
90        # Make sure test_item got all data added
91        self.assertEqual(test_item.child(0).text(), name)
92        list_from_item = test_item.child(0).data().toList()
93        self.assertIsInstance(list_from_item, list)
94        self.assertEqual(list_from_item[0].toPyObject(), test_list[0])
95        self.assertEqual(list_from_item[1].toPyObject(), test_list[1])
96        self.assertEqual(list_from_item[2].toPyObject(), test_list[2])
97
98    def testupdateModelItemWithPlot(self):
99        """
100        Test the QModelItem checkbox update method
101        """
102        test_item = QtGui.QStandardItem()
103        test_list = ['aa','11']
104        update_data = QtCore.QVariant(test_list)
105        name = "Black Sabbath"
106
107        # update the item
108        updateModelItemWithPlot(test_item, update_data, name)
109       
110        # Make sure test_item got all data added
111        self.assertEqual(test_item.child(0).text(), name)
112        self.assertTrue(test_item.child(0).isCheckable())
113        list_from_item = test_item.child(0).child(0).data().toPyObject()
114        self.assertIsInstance(list_from_item, list)
115        self.assertEqual(str(list_from_item[0]), test_list[0])
116        self.assertEqual(str(list_from_item[1]), test_list[1])
117
118
119    def testPlotsFromCheckedItems(self):
120        """
121        Test addition of a plottable to the model
122        """
123
124        # Mockup data
125        test_list0 = "FRIDAY"
126        test_list1 = "SATURDAY"
127        test_list2 = "MONDAY"
128
129        # Main item ("file")
130        checkbox_model = QtGui.QStandardItemModel()
131        checkbox_item = QtGui.QStandardItem(True)
132        checkbox_item.setCheckable(True)
133        checkbox_item.setCheckState(QtCore.Qt.Checked)
134        test_item0 = QtGui.QStandardItem()
135        test_item0.setData(QtCore.QVariant(test_list0))
136
137        # Checked item 1
138        test_item1 = QtGui.QStandardItem(True)
139        test_item1.setCheckable(True)
140        test_item1.setCheckState(QtCore.Qt.Checked)
141        object_item = QtGui.QStandardItem()
142        object_item.setData(QtCore.QVariant(test_list1))
143        test_item1.setChild(0, object_item)
144
145        checkbox_item.setChild(0, test_item0)
146        checkbox_item.appendRow(test_item1)
147
148        # Unchecked item 2
149        test_item2 = QtGui.QStandardItem(True)
150        test_item2.setCheckable(True)
151        test_item2.setCheckState(QtCore.Qt.Unchecked)
152        object_item = QtGui.QStandardItem()
153        object_item.setData(QtCore.QVariant(test_list2))
154        test_item2.setChild(0, object_item)
155        checkbox_item.appendRow(test_item2)
156
157        checkbox_model.appendRow(checkbox_item)
158
159        # Pull out the "plottable" documents
160        plot_list = plotsFromCheckedItems(checkbox_model)
161
162        # Make sure only the checked data is present
163        # FRIDAY IN
164        self.assertIn(test_list0, plot_list[0])
165        # SATURDAY IN
166        self.assertIn(test_list1, plot_list[1])
167        # MONDAY NOT IN
168        self.assertNotIn(test_list2, plot_list[0])
169        self.assertNotIn(test_list2, plot_list[1])
170
171    def testInfoFromData(self):
172        """
173        Test Info element extraction from a plottable object
174        """
175        loader = Loader()
176        manager = DataManager()
177
178        # get Data1D
179        p_file="cyl_400_20.txt"
180        output_object = loader.load(p_file)
181        new_data = manager.create_gui_data(output_object[0], p_file)
182
183        # Extract Info elements into a model item
184        item = infoFromData(new_data)
185
186        # Test the item and its children
187        self.assertIsInstance(item, QtGui.QStandardItem)
188        self.assertEqual(item.rowCount(), 5)
189        self.assertEqual(item.text(), "Info")
190        self.assertIn(p_file,   item.child(0).text())
191        self.assertIn("Run",    item.child(1).text())
192        self.assertIn("Data1D", item.child(2).text())
193        self.assertIn(p_file,   item.child(3).text())
194        self.assertIn("Process",item.child(4).text())
195
196    def testOpenLink(self):
197        """
198        Opening a link in the external browser
199        """
200        good_url1 = r"http://test.test.com"
201        good_url2 = r"mailto:test@mail.com"
202        good_url3 = r"https://127.0.0.1"
203
204        bad_url1 = ""
205        bad_url2 = QtGui.QStandardItem()
206        bad_url3 = r"poop;//**I.am.a.!bad@url"
207
208        webbrowser.open = MagicMock()
209        openLink(good_url1)
210        openLink(good_url2)
211        openLink(good_url3)
212        self.assertEqual(webbrowser.open.call_count, 3)
213
214        with self.assertRaises(AttributeError):
215            openLink(bad_url1)
216        with self.assertRaises(AttributeError):
217            openLink(bad_url2)
218        with self.assertRaises(AttributeError):
219            openLink(bad_url3)
220
221    def testRetrieveData1d(self):
222        """
223        """
224        with self.assertRaises(AttributeError):
225            retrieveData1d("BOOP")
226
227        #data = Data1D()
228        #with self.assertRaises(ValueError):
229        #    retrieveData1d(data)
230
231        data = Data1D(x=[1.0, 2.0, 3.0], y=[10.0, 11.0, 12.0])
232
233        text = retrieveData1d(data)
234
235        self.assertIn("Temperature:", text)
236        self.assertIn("Beam_size:", text)
237        self.assertIn("X_min = 1.0:  X_max = 3.0", text)
238        self.assertIn("3.0 \t12.0 \t0.0 \t0.0", text)
239
240    def testRetrieveData2d(self):
241        """
242        """
243        with self.assertRaises(AttributeError):
244            retrieveData2d("BOOP")
245        data = Data2D(image=[1.0, 2.0, 3.0],
246                      err_image=[0.01, 0.02, 0.03],
247                      qx_data=[0.1, 0.2, 0.3],
248                      qy_data=[0.1, 0.2, 0.3])
249
250        text = retrieveData2d(data)
251
252        self.assertIn("Type:         Data2D", text)
253        self.assertIn("I_min = 1.0", text)
254        self.assertIn("I_max = 3.0", text)
255        self.assertIn("2 \t0.3 \t0.3 \t3.0 \t0.03 \t0.0 \t0.0", text)
256
257    def testOnTXTSave(self):
258        """
259        Test the file writer for saving 1d/2d data
260        """
261        path = "test123"
262        if os.path.isfile(path):
263            os.remove(path)
264
265        # Broken data
266        data = Data1D(x=[1.0, 2.0, 3.0], y=[])
267        # Expect a raise
268        with self.assertRaises(IndexError):
269            onTXTSave(data, path)
270
271        # Good data - no dX/dY
272        data = Data1D(x=[1.0, 2.0, 3.0], y=[10.0, 11.0, 12.0])
273        onTXTSave(data, path)
274
275        self.assertTrue(os.path.isfile(path))
276        with open(path,'r') as out:
277            data_read = out.read()
278            self.assertEqual("<X>   <Y>\n1  10\n2  11\n3  12\n", data_read)
279
280        if os.path.isfile(path):
281            os.remove(path)
282
283        # Good data - with dX/dY
284        data = Data1D(x=[1.0, 2.0, 3.0], y=[10.0, 11.0, 12.0],
285                      dx=[0.1, 0.2, 0.3], dy=[0.1, 0.2, 0.3])
286
287        onTXTSave(data, path)
288        with open(path,'r') as out:
289            data_read = out.read()
290            self.assertIn("<X>   <Y>   <dY>   <dX>\n", data_read)
291            self.assertIn("1  10  0.1  0.1\n", data_read)
292            self.assertIn("2  11  0.2  0.2\n", data_read)
293            self.assertIn("3  12  0.3  0.3\n", data_read)
294
295        if os.path.isfile(path):
296            os.remove(path)
297
298    def testSaveData1D(self):
299        """
300        Test the 1D file save method
301        """
302        data = Data1D(x=[1.0, 2.0, 3.0], y=[10.0, 11.0, 12.0],
303                      dx=[0.1, 0.2, 0.3], dy=[0.1, 0.2, 0.3])
304
305        # Test the .txt format
306        file_name = "test123_out.txt"
307        QtGui.QFileDialog.getSaveFileName = MagicMock(return_value=file_name)
308        data.filename = "test123.txt"
309        saveData1D(data)
310        self.assertTrue(os.path.isfile(file_name))
311        os.remove(file_name)
312
313        # Test the .xml format
314        file_name = "test123_out.xml"
315        QtGui.QFileDialog.getSaveFileName = MagicMock(return_value=file_name)
316        data.filename = "test123.xml"
317        saveData1D(data)
318        self.assertTrue(os.path.isfile(file_name))
319        os.remove(file_name)
320
321        # Test the wrong format
322        file_name = "test123_out.mp3"
323        QtGui.QFileDialog.getSaveFileName = MagicMock(return_value=file_name)
324        data.filename = "test123.mp3"
325        saveData1D(data)
326        self.assertFalse(os.path.isfile(file_name))
327
328    def testSaveData2D(self):
329        """
330        Test the 1D file save method
331        """
332        data = Data2D(image=[1.0, 2.0, 3.0],
333                      err_image=[0.01, 0.02, 0.03],
334                      qx_data=[0.1, 0.2, 0.3],
335                      qy_data=[0.1, 0.2, 0.3])
336
337        # Test the .txt format
338        file_name = "test123_out.dat"
339        QtGui.QFileDialog.getSaveFileName = MagicMock(return_value=file_name)
340        data.filename = "test123.dat"
341        saveData2D(data)
342        self.assertTrue(os.path.isfile(file_name))
343        os.remove(file_name)
344
345        # Test the wrong format
346        file_name = "test123_out.mp3"
347        QtGui.QFileDialog.getSaveFileName = MagicMock(return_value=file_name)
348        data.filename = "test123.mp3"
349        saveData2D(data)
350        self.assertFalse(os.path.isfile(file_name))
351
352    def testXYTransform(self):
353        """ Assure the unit/legend transformation is correct"""
354        data = Data1D(x=[1.0, 2.0, 3.0], y=[10.0, 11.0, 12.0],
355                      dx=[0.1, 0.2, 0.3], dy=[0.1, 0.2, 0.3])
356
357        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x", yLabel="y")
358        self.assertEqual(xLabel, "()")
359        self.assertEqual(xscale, "linear")
360        self.assertEqual(yscale, "linear")
361
362        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x^(2)", yLabel="1/y")
363        self.assertEqual(xLabel, "^{2}(()^{2})")
364        self.assertEqual(yLabel, "1/(()^{-1})")
365        self.assertEqual(xscale, "linear")
366        self.assertEqual(yscale, "linear")
367
368        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x^(4)", yLabel="ln(y)")
369        self.assertEqual(xLabel, "^{4}(()^{4})")
370        self.assertEqual(yLabel, "\\ln{()}()")
371        self.assertEqual(xscale, "linear")
372        self.assertEqual(yscale, "linear")
373
374        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="ln(x)", yLabel="y^(2)")
375        self.assertEqual(xLabel, "\\ln{()}()")
376        self.assertEqual(yLabel, "^{2}(()^{2})")
377        self.assertEqual(xscale, "linear")
378        self.assertEqual(yscale, "linear")
379
380        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="log10(x)", yLabel="y*x^(2)")
381        self.assertEqual(xLabel, "()")
382        self.assertEqual(yLabel, " \\ \\ ^{2}(()^{2})")
383        self.assertEqual(xscale, "log")
384        self.assertEqual(yscale, "linear")
385
386        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="log10(x^(4))", yLabel="y*x^(4)")
387        self.assertEqual(xLabel, "^{4}(()^{4})")
388        self.assertEqual(yLabel, " \\ \\ ^{4}(()^{16})")
389        self.assertEqual(xscale, "log")
390        self.assertEqual(yscale, "linear")
391
392        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x", yLabel="1/sqrt(y)")
393        self.assertEqual(yLabel, "1/\\sqrt{}(()^{-0.5})")
394        self.assertEqual(yscale, "linear")
395
396        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x", yLabel="log10(y)")
397        self.assertEqual(yLabel, "()")
398        self.assertEqual(yscale, "log")
399
400        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x", yLabel="ln(y*x)")
401        self.assertEqual(yLabel, "\\ln{( \\ \\ )}()")
402        self.assertEqual(yscale, "linear")
403
404        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x", yLabel="ln(y*x^(2))")
405        self.assertEqual(yLabel, "\\ln ( \\ \\ ^{2})(()^{2})")
406        self.assertEqual(yscale, "linear")
407
408        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x", yLabel="ln(y*x^(4))")
409        self.assertEqual(yLabel, "\\ln ( \\ \\ ^{4})(()^{4})")
410        self.assertEqual(yscale, "linear")
411
412        xLabel, yLabel, xscale, yscale = xyTransform(data, xLabel="x", yLabel="log10(y*x^(4))")
413        self.assertEqual(yLabel, " \\ \\ ^{4}(()^{4})")
414        self.assertEqual(yscale, "log")
415
416
417class FormulaValidatorTest(unittest.TestCase):
418    """ Test the formula validator """
419    def setUp(self):
420        '''Create the validator'''
421        self.validator = FormulaValidator()
422
423    def tearDown(self):
424        '''Destroy the validator'''
425        self.validator = None
426
427    def testValidateGood(self):
428        """Test a valid Formula """
429        formula_good = "H24O12C4C6N2Pu"
430        self.assertEqual(self.validator.validate(formula_good, 1)[0], QtGui.QValidator.Acceptable)
431
432        formula_good = "(H2O)0.5(D2O)0.5"
433        self.assertEqual(self.validator.validate(formula_good, 1)[0], QtGui.QValidator.Acceptable)
434
435    def testValidateBad(self):
436        """Test a valid Formula """
437        formula_bad = "H24 %%%O12C4C6N2Pu"
438        self.assertRaises(self.validator.validate(formula_bad, 1)[0])
439        self.assertEqual(self.validator.validate(formula_bad, 1)[0], QtGui.QValidator.Intermediate)
440
441        formula_bad = [1]
442        self.assertEqual(self.validator.validate(formula_bad, 1)[0], QtGui.QValidator.Intermediate)
443
444
445if __name__ == "__main__":
446    unittest.main()
447
Note: See TracBrowser for help on using the repository browser.