source:
sasview/src/sas/perspectives/fitting/media/fitting_help.rst
@
1fda506
| Last change on this file since 1fda506 was 1fda506, checked in by smk78, 9 years ago | |
|---|---|
|
|
| File size: 18.1 KB | |
Fitting Perspective
Preparing to fit data
To fit some data you must first load some data, activate one or more data sets, send those data sets to the fitting perspective, and select a model to fit to each data set.
Instructions on how to load and activate data are in the section :ref:`Loading_data`.
SasView can fit data in one of three ways:
- in Single fit mode - individual data sets are fitted independently one-by-one
- in Simultaneous fit mode - multiple data sets are fitted simultaneously to the same model with/without constrained parameters (this might be useful, for example, if you have measured the same sample at different contrasts)
- in Batch fit mode - multiple data sets are fitted sequentially to the same model (this might be useful, for example, if you have performed a kinetic or time-resolved experiment and have lots of data sets!)
Selecting a model
By default, the models in SasView are grouped into five categories
- Shapes - models describing 'objects' (spheres, cylinders, etc)
- Shape-Independent - models describing structure in terms of density correlation functions, fractals, peaks, power laws, etc
- Customized Models - SasView-created (non-library) Python models
- Uncategorised - other models (for reflectivity, etc)
- Structure Factor - S(Q) models
Use the Category drop-down menu to chose a category of model, then select a model from the drop-down menu beneath. A graph of the chosen model, calculated using default parameter values, will appear. The graph will update dynamically as the parameter values are changed.
You can decide your own model categorizations using the :ref:`Category_Manager`.
Once you have selected a model you can read its help documentation by clicking on the Description button to the right.
Show 1D/2D
Models are normally fitted to 1D (ie, I(Q) vs Q) data sets, but some models in SasView can also be fitted to 2D (ie, I(Qx,Qy) vs Qx vs Qy) data sets.
NB: Magnetic scattering can only be fitted in SasView in 2D.
To activate 2D fitting mode, click the Show 2D button on the Fit Page. To return to 1D fitting model, click the same button (which will now say Show 1D).
Category Manager
To change the model categorizations, either choose Category Manager from the View option on the menubar, or click on the Modify button on the Fit Page.
The categorization of all models except the customized models can be reassigned, added to, and removed using Category Manager. Models can also be hidden from view in the drop-down menus.
Changing category
To change category, highlight a model in the list by left-clicking on its entry and then click the Modify button. Use the Change Category panel that appears to make the required changes.
To create a category for the selected model, click the Add button. In order to delete a category, select the category name and click the Remove Selected button. Then click Done.
Showing/hiding models
Use the Enable All/Disable All buttons and the check boxes beside each model to select the models to show/hide. To apply the selection, click Ok. Otherwise click Cancel.
NB: it may be necessary to change to a different category and then back again before any changes take effect.
Model Functions
For a complete list of all the library models available in SasView, see the section :ref:`SasView_model_functions`.
It is also possible to add your own models.
Adding your own models
There are currently two ways to add your own models to SasView:
using the :ref:`Custom_Model_Editor`
NB: Because of the way these options are implemented, it is not possible for them to use the polydispersity algorithms in SasView. Only models in the model library can do this. At the time of writing (Release 3.1.0) work is in hand to make it easier to add new models to the model library.
Custom Model Editor
From the Fitting option in the menu bar, select Edit Custom Model.
and then one of the options
- New - to create a new custom model template
- Sum|Multi(p1,p2) - to create a new model by summing/multiplying existing models in the model library
- Advanced - to edit a new custom model
- Delete - to delete a custom model
New
A model template generated by this option can be viewed and further modified using the :ref:`Advanced` option.
Sum|Multi(p1,p2)
This option creates a custom model of the form
Custom Model = scale_factor * (model1 +/* model2)
In the Easy Sum/Multi Editor give the new custom model a function name and brief description (to appear under the Details button on the Fit Page). Then select two existing models, as p1 and p2, and the required operator, '+' or '*' between them. Finally, click the Apply button to generate the model and then click Close.
NB: Any changes to a custom model generated in this way only become effective after it is re-selected from the model drop-down menu on the Fit Page.
Advanced
Selecting this option shows all the custom models in the plugin model folder
C:Users[username].sasviewplugin_models - (on Windows)
You can edit, modify, and save the Python code in any of these models using the Advanced Custom Model Editor.
NB: Unless you are confident about what you are doing, it is recommended that you only modify lines denoted with the ## <----- comments!
When editing is complete, select Run -> Compile from the Model Editor menu bar. An Info box will appear with the results of the compilation and model unit tests. The model will only be usable if the tests 'pass'.
To use the model, go to the relevant Fit Page, select the Customized Models category and then select the model from the drop-down menu.
NB: Any changes to a custom model generated in this way only become effective after it is re-selected from the model drop-down menu on the Fit Page.
Delete
Simply highlight the custom model to be removed. This operation is final!
NB: Custom models shipped with SasView cannot be removed in this way.
Writing a Plugin
Advanced users can write their own model in Python and save it to the the SasView plugin_models folder
C:Users[username].sasviewplugin_models - (on Windows)
in .py format. The next time SasView is started it will compile the plugin and add it to the list of Customized Models.
It is recommended that existing plugin models be used as templates.
Fitting Options
It is possible to specify which optimiser SasView should use to fit the data, and to modify some of the configurational parameters for each optimiser.
From Fitting in the menu bar select Fit Options, then select one of the following optimisers:
- DREAM
- Levenberg-Marquardt
- Quasi-Newton BFGS
- Differential Evolution
- Nelder-Mead Simplex
These optimisers form the Bumps package written by P Kienzle. For more information on each optimiser, see the :ref:`Fitting Documentation`.
Shortcuts
Copy/Paste Parameters
It is possible to copy the parameters from one Fit Page and to paste them into another Fit Page using the same model.
To copy parameters, either:
- Select Edit -> Copy Params from the menu bar, or
- Use Ctrl(Cmd on Mac) + Left Mouse Click on the Fit Page.
To paste parameters, either:
- Select Edit -> Paste Params from the menu bar, or
- Use Ctrl(Cmd on Mac) + Shift + Left-click on the Fit Page.
If either operation is successful a message will appear in the info line at the bottom of the SasView window.
Bookmark
To Bookmark a Fit Page either:
- Select a Fit Page and then click on Bookmark in the tool bar, or
- Right-click and select the Bookmark in the popup menu.
Status Bar & Console
The status bar is located at the bottom of the SasView window and displays messages, hints, warnings and errors.
At the right-hand side of the status bar is a button marked Console. The Console displays available message history and some run-time traceback information.
During a long task the Console can also be used to monitor the progress.
Single Fit Mode
One of two fit-engines can be chosen from the Fitting menu bar. The Simple Fit- engine uses Scipy's leasqr and the Complex Fit-Engine is a custom optimizer that provides a better chance to find the global minimum of the χ 2 but that requires longer computation time. In order to set a data to a control panel (FitPage), see the "DataLoader Help". Once a data set to the FiPage, select a model from the combo box. The default parameters of the model will be display. Set initial parameters if need. Check and uncheck parameters to fit/fix. Click the 'Fit' button. When the fitting is finished, the resultant parameter values will be displayed with the errors. If a error is missing, it generally means that the corresponding parameter is not very depending on the model. The chisq/Npt_fit and the plot associated with the fit operation will be also updated.
Simultaneous Fit Mode
This fitting option enables to set a number of the constraints between the parameters of fitting(s). It requires one or more FitPages with a data and a model set for the fitting, and performs multiple fittings given by the FitPage(s). The Complex (ParkMC) FitEngine will be used automatically.
Simultaneous Fit without Constraint
Assuming some FitPages are already set up, check the checkboxes of the model_data rows to fit. And click the 'Fit' button. The results will return to each FitPages.
Note that the chi2/Npts returned is the sum of the chi2/Npts of each fits. If one needs the chi2 value only for a page, click the 'Compute' button in the FitPage to recalculate.
Simultaneous Fit with Constraint
Enter constraint in the text control next to constraint fit button. Constraint should be of type model1 parameter name = f(model2 parameter name) for example, M0.radius=2*M1.radius. Many constraints can be entered for a single fit. Each of them should be separated by a newline charater or ";" The easy setup can generate many constraint inputs easily when the selected two models are the same type.
Note that the chi2/Npts returned is the sum of the chi2/Npts of each fits. If one needs the chi2 value only for one fit, click the 'Compute' button in the FitPage to recalculate.
Batch Fit Mode
Batch Fit
Create a Batch Page by selecting the Batch radio button on the DataExplorer (see figure below) and for a new control page select 'New FitPage' in the Fitting menubar.
Figure 1: MenuBar:
Load Data to the DataExplorer if not already loaded.
Select one or more data sets by checking the check boxes, and then make sure that "Fitting" is selected in the dropdown menu next to the "Send To" button. Once ready, click the 'Send To' button to set data to a BatchPage. If already an empty batch page exists, it will be set there. Otherwise it will create a new Batch Page. Set up the model and the parameter values as same as a single fitting (see Single Fit help). Then use 'Fit' button to perform the fitting.
Unlike a single fit, the results of the fittings will not return to the BatchPage'. Instead, a Grid window will be provided once the fitting is completed. The Grid window is also accessible from the 'View' menu (see Figure 2).
Note that only one model is used for all the data. The initial parameter values given in the control page will be used all the data fittings. If one wants the FitEngine to use the initial values from the results of the previous data fitting (if any), choose the 'Chain Fitting' option in the Fitting menubar, which will speed up the fitting especially when you have lots of, and similar, data sets.
Batch Window
Batch Window provides an easy way to view the fit results, i.e., plot data, fits, and residuals. Batch window will be automatically shown after a batch fit is finished.
Once closed, it can be opened anytime from the "View" menubar item (see Figure 2).
Figure 2: Edit Menu:
Edit Grid
Once a batch fit is completed, all fitted and fixed model parameters are displayed to the current sheet of the batch window except the errors of the parameters. To view the errors, click on a given column then under Edit menubar item, and insert the desired parameter by selecting a menu item with the appropriated label. Empty column can be inserted in the same way. A column value can be customized by editing an existing empty column.
To Remove column from the grid, select it, choose edit menu, and click the 'remove' menu item. Any removed column should reinserted whenever needed.
All above options are also available when right clicking on a given column label(see Figure 3).
Note: A column always needs to be selected in order to remove or insert a column in the grid.
Figure 3: Edit Menu:
Save Grid
To save the current page on the batch window, select the 'File' menubar item(see Figure 4), then choose the 'Save as' menu item to save it as a .csv file.
Note: The grid doesn't save the data array, fits, and the array residuals. As a result, the 'View (fit) Results' functionality will be lost when reloading the saved file.
Warning! To ensure accuracy of saved fit results, it is recommended to save the current grid before modifying it .
Open Batch Results
Any csv file can be opened in the grid by selecting the 'Open' under the 'File' menu in the Grid Window(see Figure 4). All columns in the file will be displayed but insertion will not available. Insertion will be available only when at least one column will be removed from the grid.
Figure 4: MenuBar:
Plot
To plot a column versus another, select one column at the time, click the 'Add' button next to the text control of X/Y -axis Selection Range to plot the value of this column on the X/Y axis. Alternatively, all available range can be selected by clicking the column letter (eg. B). Repeat the same procedure the next axis. Finally, click the 'Plot' button. When clicking on Add button, the grid will automatically fill the axis label, but different labels and units can be entered in the correct controls before clicking on the plot button.
X/Y -Axis Selection Range can be edited manually. These text controls allow the following types of expression (operation can be + - * /, or pow)
1) if the current axis label range is a function of 1 or more columns, write this type of expression
constant1 * column_name1 [minimum row index : maximum row index] operator constant2 * column_name2 [minimum row index : maximum row index]
Example: radius [2 : 5] -3 * scale [2 : 5]
2) if only some values of a given column are need but the range between the first row and the last row used is not continuous, write the following expression in the text control
column_name1 [minimum row index1 : maximum row index1] , column_name1 [minimum row index2 : maximum row index2]
Example : radius [2 : 5] , radius [10 : 25]
Note: Both text controls ( X and Y-axis Selection Ranges) need to be filled with valid entries for plotting to work. The dY-bar is optional (see Figure 5).
Figure 5: Plotting
View Column/Cell(s)
Select 1 or more cells from the same column, click the 'View Fits' button to display available curves.
For example, select the cells of the 'Chi2' column, then click the 'View Fits' button. The plots generates will represent the residuals plots.
If you select any cells of the 'Data' column and click the 'View Fits' button. It generates both data and fits in the graph (see Figure 6).
Alternatively, just click the column letter (eg. B) to choose all the available data sets, then simply click the 'View Fits' button to plot the data and fits.
Figure 6: View Fits
