| 1 | |
|---|
| 2 | |
|---|
| 3 | import time |
|---|
| 4 | from data_util.calcthread import CalcThread |
|---|
| 5 | import sys |
|---|
| 6 | import numpy,math |
|---|
| 7 | from sans.models.smearing_2d import Smearer2D |
|---|
| 8 | |
|---|
| 9 | class Calc2D(CalcThread): |
|---|
| 10 | """ |
|---|
| 11 | Compute 2D model |
|---|
| 12 | This calculation assumes a 2-fold symmetry of the model |
|---|
| 13 | where points are computed for one half of the detector |
|---|
| 14 | and I(qx, qy) = I(-qx, -qy) is assumed. |
|---|
| 15 | """ |
|---|
| 16 | def __init__(self, x, y, data,model,smearer,qmin, qmax,qstep, |
|---|
| 17 | page_id , |
|---|
| 18 | state=None, |
|---|
| 19 | toggle_mode_on=False, |
|---|
| 20 | completefn = None, |
|---|
| 21 | updatefn = None, |
|---|
| 22 | yieldtime = 0.01, |
|---|
| 23 | worktime = 0.01 |
|---|
| 24 | ): |
|---|
| 25 | CalcThread.__init__(self,completefn, |
|---|
| 26 | updatefn, |
|---|
| 27 | yieldtime, |
|---|
| 28 | worktime) |
|---|
| 29 | self.qmin= qmin |
|---|
| 30 | self.qmax= qmax |
|---|
| 31 | self.qstep= qstep |
|---|
| 32 | self.toggle_mode_on = toggle_mode_on |
|---|
| 33 | self.x = x |
|---|
| 34 | self.y = y |
|---|
| 35 | self.data= data |
|---|
| 36 | self.page_id = page_id |
|---|
| 37 | self.state = None |
|---|
| 38 | # the model on to calculate |
|---|
| 39 | self.model = model |
|---|
| 40 | self.smearer = smearer#(data=self.data,model=self.model) |
|---|
| 41 | self.starttime = 0 |
|---|
| 42 | |
|---|
| 43 | def compute(self): |
|---|
| 44 | """ |
|---|
| 45 | Compute the data given a model function |
|---|
| 46 | """ |
|---|
| 47 | self.starttime = time.time() |
|---|
| 48 | # Determine appropriate q range |
|---|
| 49 | if self.qmin==None: |
|---|
| 50 | self.qmin = 0 |
|---|
| 51 | if self.qmax== None: |
|---|
| 52 | if self.data !=None: |
|---|
| 53 | newx= math.pow(max(math.fabs(self.data.xmax),math.fabs(self.data.xmin)),2) |
|---|
| 54 | newy= math.pow(max(math.fabs(self.data.ymax),math.fabs(self.data.ymin)),2) |
|---|
| 55 | self.qmax=math.sqrt( newx + newy ) |
|---|
| 56 | |
|---|
| 57 | if self.data != None: |
|---|
| 58 | self.I_data = self.data.data |
|---|
| 59 | self.qx_data = self.data.qx_data |
|---|
| 60 | self.qy_data = self.data.qy_data |
|---|
| 61 | self.dqx_data = self.data.dqx_data |
|---|
| 62 | self.dqy_data = self.data.dqy_data |
|---|
| 63 | self.mask = self.data.mask |
|---|
| 64 | else: |
|---|
| 65 | xbin = numpy.linspace(start= -1*self.qmax, |
|---|
| 66 | stop= self.qmax, |
|---|
| 67 | num= self.qstep, |
|---|
| 68 | endpoint=True ) |
|---|
| 69 | ybin = numpy.linspace(start= -1*self.qmax, |
|---|
| 70 | stop= self.qmax, |
|---|
| 71 | num= self.qstep, |
|---|
| 72 | endpoint=True ) |
|---|
| 73 | |
|---|
| 74 | new_xbin = numpy.tile(xbin, (len(ybin),1)) |
|---|
| 75 | new_ybin = numpy.tile(ybin, (len(xbin),1)) |
|---|
| 76 | new_ybin = new_ybin.swapaxes(0,1) |
|---|
| 77 | new_xbin = new_xbin.flatten() |
|---|
| 78 | new_ybin = new_ybin.flatten() |
|---|
| 79 | self.qy_data = new_ybin |
|---|
| 80 | self.qx_data = new_xbin |
|---|
| 81 | # fake data |
|---|
| 82 | self.I_data = numpy.ones(len(self.qx_data)) |
|---|
| 83 | |
|---|
| 84 | self.mask = numpy.ones(len(self.qx_data),dtype=bool) |
|---|
| 85 | |
|---|
| 86 | # Define matrix where data will be plotted |
|---|
| 87 | radius= numpy.sqrt( self.qx_data*self.qx_data + self.qy_data*self.qy_data ) |
|---|
| 88 | index_data= (self.qmin<= radius)&(self.mask) |
|---|
| 89 | |
|---|
| 90 | # For theory, qmax is based on 1d qmax |
|---|
| 91 | # so that must be mulitified by sqrt(2) to get actual max for 2d |
|---|
| 92 | index_model = ((self.qmin <= radius)&(radius<= self.qmax)) |
|---|
| 93 | index_model = (index_model)&(self.mask) |
|---|
| 94 | index_model = (index_model)&(numpy.isfinite(self.I_data)) |
|---|
| 95 | if self.data ==None: |
|---|
| 96 | # Only qmin value will be consider for the detector |
|---|
| 97 | index_model = index_data |
|---|
| 98 | |
|---|
| 99 | if self.smearer != None: |
|---|
| 100 | # Set smearer w/ data, model and index. |
|---|
| 101 | fn = self.smearer |
|---|
| 102 | fn.set_model(self.model) |
|---|
| 103 | fn.set_index(index_model) |
|---|
| 104 | # Get necessary data from self.data and set the data for smearing |
|---|
| 105 | fn.get_data() |
|---|
| 106 | # Calculate smeared Intensity (by Gaussian averaging): DataLoader/smearing2d/Smearer2D() |
|---|
| 107 | value = fn.get_value() |
|---|
| 108 | |
|---|
| 109 | else: |
|---|
| 110 | # calculation w/o smearing |
|---|
| 111 | value = self.model.evalDistribution([self.qx_data[index_model],self.qy_data[index_model]]) |
|---|
| 112 | |
|---|
| 113 | output = numpy.zeros(len(self.qx_data)) |
|---|
| 114 | |
|---|
| 115 | # output default is None |
|---|
| 116 | # This method is to distinguish between masked point(nan) and data point = 0. |
|---|
| 117 | output = output/output |
|---|
| 118 | # set value for self.mask==True, else still None to Plottools |
|---|
| 119 | output[index_model] = value |
|---|
| 120 | |
|---|
| 121 | elapsed = time.time()-self.starttime |
|---|
| 122 | self.complete(image=output, |
|---|
| 123 | data=self.data, |
|---|
| 124 | page_id=self.page_id, |
|---|
| 125 | model=self.model, |
|---|
| 126 | state=self.state, |
|---|
| 127 | toggle_mode_on=self.toggle_mode_on, |
|---|
| 128 | elapsed=elapsed, |
|---|
| 129 | index=index_model, |
|---|
| 130 | qmin=self.qmin, |
|---|
| 131 | qmax=self.qmax, |
|---|
| 132 | qstep=self.qstep) |
|---|
| 133 | |
|---|
| 134 | |
|---|
| 135 | class Calc1D(CalcThread): |
|---|
| 136 | """ |
|---|
| 137 | Compute 1D data |
|---|
| 138 | """ |
|---|
| 139 | def __init__(self, x, model, |
|---|
| 140 | page_id, |
|---|
| 141 | data=None, |
|---|
| 142 | qmin=None, |
|---|
| 143 | qmax=None, |
|---|
| 144 | smearer=None, |
|---|
| 145 | toggle_mode_on=False, |
|---|
| 146 | state=None, |
|---|
| 147 | completefn = None, |
|---|
| 148 | updatefn = None, |
|---|
| 149 | yieldtime = 0.01, |
|---|
| 150 | worktime = 0.01 |
|---|
| 151 | ): |
|---|
| 152 | """ |
|---|
| 153 | """ |
|---|
| 154 | CalcThread.__init__(self,completefn, |
|---|
| 155 | updatefn, |
|---|
| 156 | yieldtime, |
|---|
| 157 | worktime) |
|---|
| 158 | self.x = numpy.array(x) |
|---|
| 159 | self.data = data |
|---|
| 160 | self.qmin = qmin |
|---|
| 161 | self.qmax = qmax |
|---|
| 162 | self.model = model |
|---|
| 163 | self.toggle_mode_on = toggle_mode_on |
|---|
| 164 | self.state = state |
|---|
| 165 | self.page_id = page_id |
|---|
| 166 | self.smearer = smearer |
|---|
| 167 | self.starttime = 0 |
|---|
| 168 | |
|---|
| 169 | def compute(self): |
|---|
| 170 | """ |
|---|
| 171 | Compute model 1d value given qmin , qmax , x value |
|---|
| 172 | """ |
|---|
| 173 | self.starttime = time.time() |
|---|
| 174 | output = numpy.zeros((len(self.x))) |
|---|
| 175 | index= (self.qmin <= self.x)& (self.x <= self.qmax) |
|---|
| 176 | |
|---|
| 177 | ##smearer the ouput of the plot |
|---|
| 178 | if self.smearer!=None: |
|---|
| 179 | first_bin, last_bin = self.smearer.get_bin_range(self.qmin, self.qmax) |
|---|
| 180 | output[first_bin:last_bin] = self.model.evalDistribution(self.x[first_bin:last_bin]) |
|---|
| 181 | output = self.smearer(output, first_bin, last_bin) |
|---|
| 182 | else: |
|---|
| 183 | output[index] = self.model.evalDistribution(self.x[index]) |
|---|
| 184 | |
|---|
| 185 | elapsed = time.time() - self.starttime |
|---|
| 186 | |
|---|
| 187 | self.complete(x=self.x[index], y=output[index], |
|---|
| 188 | page_id=self.page_id, |
|---|
| 189 | state=self.state, |
|---|
| 190 | toggle_mode_on=self.toggle_mode_on, |
|---|
| 191 | elapsed=elapsed,index=index, model=self.model, |
|---|
| 192 | data=self.data) |
|---|
| 193 | |
|---|
| 194 | def results(self): |
|---|
| 195 | """ |
|---|
| 196 | Send resuts of the computation |
|---|
| 197 | """ |
|---|
| 198 | return [self.out, self.index] |
|---|
| 199 | |
|---|
| 200 | """ |
|---|
| 201 | Example: :: |
|---|
| 202 | |
|---|
| 203 | class CalcCommandline: |
|---|
| 204 | def __init__(self, n=20000): |
|---|
| 205 | #print thread.get_ident() |
|---|
| 206 | from sans.models.CylinderModel import CylinderModel |
|---|
| 207 | |
|---|
| 208 | model = CylinderModel() |
|---|
| 209 | |
|---|
| 210 | |
|---|
| 211 | print model.runXY([0.01, 0.02]) |
|---|
| 212 | |
|---|
| 213 | qmax = 0.01 |
|---|
| 214 | qstep = 0.0001 |
|---|
| 215 | self.done = False |
|---|
| 216 | |
|---|
| 217 | x = numpy.arange(-qmax, qmax+qstep*0.01, qstep) |
|---|
| 218 | y = numpy.arange(-qmax, qmax+qstep*0.01, qstep) |
|---|
| 219 | |
|---|
| 220 | |
|---|
| 221 | calc_thread_2D = Calc2D(x, y, None, model.clone(),None, |
|---|
| 222 | -qmax, qmax,qstep, |
|---|
| 223 | completefn=self.complete, |
|---|
| 224 | updatefn=self.update , |
|---|
| 225 | yieldtime=0.0) |
|---|
| 226 | |
|---|
| 227 | calc_thread_2D.queue() |
|---|
| 228 | calc_thread_2D.ready(2.5) |
|---|
| 229 | |
|---|
| 230 | while not self.done: |
|---|
| 231 | time.sleep(1) |
|---|
| 232 | |
|---|
| 233 | def update(self,output): |
|---|
| 234 | print "update" |
|---|
| 235 | |
|---|
| 236 | def complete(self, image, data, model, elapsed, qmin, qmax,index, qstep ): |
|---|
| 237 | print "complete" |
|---|
| 238 | self.done = True |
|---|
| 239 | |
|---|
| 240 | if __name__ == "__main__": |
|---|
| 241 | CalcCommandline() |
|---|
| 242 | """ |
|---|
