fitpage.py @ 6d48919

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2release_4.0.1ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 6d48919 was 20905a0, checked in by Jae Cho <jhjcho@…>, 14 years ago
fixed small problem of custom order
Property mode set to `100644`
File size: 99.9 KB

Line
1
2
3	import sys
4	import wx
5	import wx.lib.newevent
6	import numpy
7	import copy
8	import math
9	import time
10	from sans.models.dispersion_models import ArrayDispersion, GaussianDispersion
11	from DataLoader.data_info import Data1D
12	from sans.guicomm.events import StatusEvent
13	from sans.guiframe.utils import format_number,check_float
14
15
16
17	## event to know the selected fit engine
18	(FitterTypeEvent, EVT_FITTER_TYPE) = wx.lib.newevent.NewEvent()
19	(FitStopEvent, EVT_FIT_STOP) = wx.lib.newevent.NewEvent()
20	(Chi2UpdateEvent, EVT_CHI2_UPDATE) = wx.lib.newevent.NewEvent()
21	_BOX_WIDTH = 76
22	_DATA_BOX_WIDTH = 300
23	SMEAR_SIZE_L = 0.005
24	SMEAR_SIZE_H = 0.006
25
26	import basepage
27	from basepage import BasicPage
28	from basepage import PageInfoEvent
29	from DataLoader.qsmearing import smear_selection
30
31	class FitPage(BasicPage):
32	"""
33	FitPanel class contains fields allowing to display results when
34	fitting a model and one data
35
36	:note: For Fit to be performed the user should check at least one parameter
37	on fit Panel window.
38	"""
39
40	def __init__(self,parent, page_info):
41	"""
42	Initialization of the Panel
43	"""
44	BasicPage.__init__(self, parent, page_info)
45
46	## draw sizer
47	self._fill_datainfo_sizer()
48	# get smear info from data
49	self._get_smear_info()
50	self._fill_model_sizer( self.sizer1)
51	self._get_defult_custom_smear()
52	self._fill_range_sizer()
53
54	if self.data is None:
55	self.formfactorbox.Disable()
56	self.structurebox.Disable()
57	else:
58	self.smearer = smear_selection(self.data)
59	if self.smearer ==None:
60	self.enable_smearer.Disable()
61	## to update the panel according to the fit engine type selected
62	self.Bind(EVT_FITTER_TYPE,self._on_engine_change)
63	self.Bind(EVT_FIT_STOP,self._on_fit_complete)
64	self.Bind(EVT_CHI2_UPDATE, self.on_complete_chisqr)
65
66	def _on_fit_complete(self, event):
67	"""
68	When fit is complete ,reset the fit button label.
69	"""
70	#self.btFit.SetLabel("Fit")
71	#self.btFit.Unbind(event=wx.EVT_BUTTON, id=self.btFit.GetId())
72	#self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._onFit,id=self.btFit.GetId())
73	pass
74
75	def _is_2D(self):
76	"""
77	Check if data_name is Data2D
78
79	:return: True or False
80
81	"""
82
83	if self.data.__class__.__name__ =="Data2D":
84	return True
85	return False
86
87	def _on_engine_change(self, event):
88	"""
89	get an event containing the current name of the fit engine type
90
91	:param event: FitterTypeEvent containing the name of the current engine
92
93	"""
94	self.engine_type = event.type
95	self.state.engine_type = self.engine_type
96	if len(self.parameters)==0:
97	self.Layout()
98	return
99	if event.type =="park":
100	self.btFit.SetLabel("Fit")
101
102	for item in self.parameters:
103	if event.type =="scipy" :
104	item[5].SetValue("")
105	item[5].Hide()
106	item[6].SetValue("")
107	item[6].Hide()
108	self.text2_min.Hide()
109	self.text2_max.Hide()
110
111	else:
112	item[5].Show(True)
113	item[6].Show(True)
114	self.text2_min.Show(True)
115	self.text2_max.Show(True)
116	for item in self.fittable_param:
117	if item[5]!=None and item[6]!=None and not item in self.orientation_params_disp:
118	if event.type =="scipy" and not item in self.orientation_params:
119	item[5].SetValue("")
120	item[5].Hide()
121	item[6].SetValue("")
122	item[6].Hide()
123	self.text2_min.Hide()
124	self.text2_max.Hide()
125	self.text_disp_min.Hide()
126	self.text_disp_max.Hide()
127	else:
128	item[5].Show(True)
129	item[6].Show(True)
130	self.text2_min.Show(True)
131	self.text2_max.Show(True)
132	self.text_disp_min.Show(True)
133	self.text_disp_max.Show(True)
134
135	for item in self.orientation_params:
136	if item[5]!=None and item[6]!=None:
137	if event.type =="scipy" or self.data.__class__.__name__ !="Data2D":
138	item[5].SetValue("")
139	item[5].Hide()
140	item[6].SetValue("")
141	item[6].Hide()
142	else:
143	item[5].Show(True)
144	item[6].Show(True)
145
146	for item in self.orientation_params_disp:
147	if item[5]!=None and item[6]!=None:
148	if event.type =="scipy" or self.data.__class__.__name__ !="Data2D":
149	item[5].SetValue("")
150	item[5].Hide()
151	item[6].SetValue("")
152	item[6].Hide()
153	else:
154	item[5].Show(True)
155	item[6].Show(True)
156	self.Layout()
157	self.Refresh()
158
159	def _fill_range_sizer(self):
160	"""
161	Fill the sizer containing the plotting range
162	add access to npts
163	"""
164	is_2Ddata = False
165
166	# Check if data is 2D
167	if self.data.__class__.__name__ == 'Data2D':
168	is_2Ddata = True
169
170	title = "Fitting"
171	#smear messages & titles
172	smear_message_none = "No smearing is selected..."
173	smear_message_dqdata = "The dQ data is being used for smearing..."
174	smear_message_2d = "Higher accuracy is very time-expensive. Use it with care..."
175	smear_message_new_ssmear = "Please enter only the value of interest to customize smearing..."
176	smear_message_new_psmear = "Please enter both; the dQ will be generated by interpolation..."
177	smear_message_2d_x_title = "<dQx>[1/A]:"
178	smear_message_2d_y_title = "<dQy>[1/A]:"
179	smear_message_pinhole_min_title = "dQ_low[1/A]:"
180	smear_message_pinhole_max_title = "dQ_high[1/A]:"
181	smear_message_slit_height_title = "Slit height[1/A]:"
182	smear_message_slit_width_title = "Slit width[1/A]:"
183
184	self._get_smear_info()
185
186	#Sizers
187	box_description_range = wx.StaticBox(self, -1,str(title))
188	boxsizer_range = wx.StaticBoxSizer(box_description_range, wx.VERTICAL)
189	self.sizer_set_smearer = wx.BoxSizer(wx.VERTICAL)
190	sizer_smearer = wx.BoxSizer(wx.HORIZONTAL)
191	self.sizer_new_smear= wx.BoxSizer(wx.HORIZONTAL)
192	self.sizer_set_masking = wx.BoxSizer(wx.HORIZONTAL)
193	sizer_chi2 = wx.BoxSizer(wx.VERTICAL)
194	smear_set_box= wx.StaticBox(self, -1,'Set Instrumental Smearing')
195	sizer_smearer_box = wx.StaticBoxSizer(smear_set_box, wx.HORIZONTAL)
196	sizer_smearer_box.SetMinSize((_DATA_BOX_WIDTH,85))
197	sizer_fit = wx.GridSizer(2, 4,2,6)
198
199	# combobox for smear2d accuracy selection
200	self.smear_accuracy = wx.ComboBox(self, -1,size=(50,-1),style=wx.CB_READONLY)
201	self._set_accuracy_list()
202	self.smear_accuracy.SetValue(self.smear2d_accuracy)
203	self.smear_accuracy.SetSelection(0)
204	self.smear_accuracy.SetToolTipString("'Higher' uses more Gaussian points for smearing computation.")
205
206	wx.EVT_COMBOBOX(self.smear_accuracy,-1, self._on_select_accuracy)
207
208	#Fit button
209	self.btFit = wx.Button(self,wx.NewId(),'Fit', size=(88,25))
210	self.btFit.Bind(wx.EVT_BUTTON, self._onFit,id= self.btFit.GetId())
211	self.btFit.SetToolTipString("Start fitting.")
212
213	#textcntrl for custom resolution
214	self.smear_pinhole_max = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
215	text_enter_callback = self.onPinholeSmear)
216	self.smear_pinhole_min = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
217	text_enter_callback = self.onPinholeSmear)
218	self.smear_slit_height= self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
219	text_enter_callback = self.onSlitSmear)
220	self.smear_slit_width = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
221	text_enter_callback = self.onSlitSmear)
222
223	## smear
224	self.smear_data_left= BGTextCtrl(self, -1, size=(_BOX_WIDTH-25,20), style=0)
225	self.smear_data_left.SetValue(str(self.dq_l))
226	self.smear_data_right = BGTextCtrl(self, -1, size=(_BOX_WIDTH-25,20), style=0)
227	self.smear_data_right.SetValue(str(self.dq_r))
228
229	#set default values for smear
230	self.smear_pinhole_max.SetValue(str(self.dx_max))
231	self.smear_pinhole_min.SetValue(str(self.dx_min))
232	self.smear_slit_height.SetValue(str(self.dxl))
233	self.smear_slit_width.SetValue(str(self.dxw))
234
235	#Filling the sizer containing instruments smearing info.
236	self.disable_smearer = wx.RadioButton(self, -1, 'None', style=wx.RB_GROUP)
237	self.enable_smearer = wx.RadioButton(self, -1, 'Use dQ Data')
238	#self.enable_smearer.SetToolTipString("Click to use the loaded dQ data for smearing.")
239	self.pinhole_smearer = wx.RadioButton(self, -1, 'Custom Pinhole Smear')
240	#self.pinhole_smearer.SetToolTipString("Click to input custom resolution for pinhole smearing.")
241	self.slit_smearer = wx.RadioButton(self, -1, 'Custom Slit Smear')
242	#self.slit_smearer.SetToolTipString("Click to input custom resolution for slit smearing.")
243	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.disable_smearer.GetId())
244	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.enable_smearer.GetId())
245	self.Bind(wx.EVT_RADIOBUTTON, self.onPinholeSmear, id=self.pinhole_smearer.GetId())
246	self.Bind(wx.EVT_RADIOBUTTON, self.onSlitSmear, id=self.slit_smearer.GetId())
247	self.disable_smearer.SetValue(True)
248
249	# add 4 types of smearing to the sizer
250	sizer_smearer.Add( self.disable_smearer,0, wx.LEFT, 10)
251	sizer_smearer.Add((10,10))
252	sizer_smearer.Add( self.enable_smearer)
253	sizer_smearer.Add((10,10))
254	sizer_smearer.Add( self.pinhole_smearer )
255	sizer_smearer.Add((10,10))
256	sizer_smearer.Add( self.slit_smearer )
257	sizer_smearer.Add((10,10))
258
259	# StaticText for chi2, N(for fitting), Npts
260	self.tcChi = BGTextCtrl(self, -1, "-", size=(75,20), style=0)
261	self.tcChi.SetToolTipString("Chi2/Npts")
262	self.Npts_fit = BGTextCtrl(self, -1, "-", size=(75,20), style=0)
263	self.Npts_fit.SetToolTipString(" Npts : number of points selected for fitting")
264	self.Npts_total = BGTextCtrl(self, -1, "-", size=(75,20), style=0)
265	self.Npts_total.SetToolTipString(" Total Npts : total number of data points")
266	box_description_1= wx.StaticText(self, -1,' Chi2/Npts')
267	box_description_2= wx.StaticText(self, -1,' Npts')
268	box_description_3= wx.StaticText(self, -1,' Total Npts')
269	box_description_4= wx.StaticText(self, -1,' ')
270
271
272	sizer_fit.Add(box_description_1,0,0)
273	sizer_fit.Add(box_description_2,0,0)
274	sizer_fit.Add(box_description_3,0,0)
275	sizer_fit.Add(box_description_4,0,0)
276	sizer_fit.Add(self.tcChi,0,0)
277	sizer_fit.Add(self.Npts_fit ,0,0)
278	sizer_fit.Add(self.Npts_total,0,0)
279	sizer_fit.Add(self.btFit,0,0)
280
281	# StaticText for smear
282	#self.tcChi = wx.StaticText(self, -1, "-", style=wx.ALIGN_LEFT)
283	self.smear_description_none = wx.StaticText(self, -1, smear_message_none , style=wx.ALIGN_LEFT)
284	self.smear_description_dqdata = wx.StaticText(self, -1, smear_message_dqdata , style=wx.ALIGN_LEFT)
285	self.smear_description_type = wx.StaticText(self, -1, "Type:" , style=wx.ALIGN_LEFT)
286	self.smear_description_accuracy_type = wx.StaticText(self, -1, "Accuracy:" , style=wx.ALIGN_LEFT)
287	self.smear_description_smear_type = BGTextCtrl(self, -1, size=(57,20), style=0)
288	self.smear_description_smear_type.SetValue(str(self.dq_l))
289	self.SetBackgroundColour(self.GetParent().GetBackgroundColour())
290	self.smear_description_2d = wx.StaticText(self, -1, smear_message_2d , style=wx.ALIGN_LEFT)
291	self.smear_message_new_s = wx.StaticText(self, -1, smear_message_new_ssmear , style=wx.ALIGN_LEFT)
292	self.smear_message_new_p = wx.StaticText(self, -1, smear_message_new_psmear , style=wx.ALIGN_LEFT)
293	self.smear_description_2d_x = wx.StaticText(self, -1, smear_message_2d_x_title , style=wx.ALIGN_LEFT)
294	self.smear_description_2d_y = wx.StaticText(self, -1, smear_message_2d_y_title , style=wx.ALIGN_LEFT)
295	self.smear_description_pin_min = wx.StaticText(self, -1, smear_message_pinhole_min_title , style=wx.ALIGN_LEFT)
296	self.smear_description_pin_max = wx.StaticText(self, -1, smear_message_pinhole_max_title , style=wx.ALIGN_LEFT)
297	self.smear_description_slit_height = wx.StaticText(self, -1, smear_message_slit_height_title , style=wx.ALIGN_LEFT)
298	self.smear_description_slit_width = wx.StaticText(self, -1, smear_message_slit_width_title , style=wx.ALIGN_LEFT)
299
300	#arrange sizers
301	#boxsizer1.Add( self.tcChi )
302	self.sizer_set_smearer.Add(sizer_smearer )
303	self.sizer_set_smearer.Add((10,10))
304	self.sizer_set_smearer.Add( self.smear_description_none,0, wx.CENTER, 10 )
305	self.sizer_set_smearer.Add( self.smear_description_dqdata,0, wx.CENTER, 10 )
306	self.sizer_set_smearer.Add( self.smear_description_2d,0, wx.CENTER, 10 )
307	self.sizer_new_smear.Add( self.smear_description_type,0, wx.CENTER, 10 )
308	self.sizer_new_smear.Add( self.smear_description_accuracy_type,0, wx.CENTER, 10 )
309	self.sizer_new_smear.Add( self.smear_accuracy )
310	self.sizer_new_smear.Add( self.smear_description_smear_type,0, wx.CENTER, 10 )
311	self.sizer_new_smear.Add((15,-1))
312	self.sizer_new_smear.Add( self.smear_description_2d_x,0, wx.CENTER, 10 )
313	self.sizer_new_smear.Add( self.smear_description_pin_min,0, wx.CENTER, 10 )
314	self.sizer_new_smear.Add( self.smear_description_slit_height,0, wx.CENTER, 10 )
315
316	self.sizer_new_smear.Add( self.smear_pinhole_min,0, wx.CENTER, 10 )
317	self.sizer_new_smear.Add( self.smear_slit_height,0, wx.CENTER, 10 )
318	self.sizer_new_smear.Add( self.smear_data_left,0, wx.CENTER, 10 )
319	self.sizer_new_smear.Add((20,-1))
320	self.sizer_new_smear.Add( self.smear_description_2d_y,0, wx.CENTER, 10 )
321	self.sizer_new_smear.Add( self.smear_description_pin_max,0, wx.CENTER, 10 )
322	self.sizer_new_smear.Add( self.smear_description_slit_width,0, wx.CENTER, 10 )
323
324	self.sizer_new_smear.Add( self.smear_pinhole_max,0, wx.CENTER, 10 )
325	self.sizer_new_smear.Add( self.smear_slit_width,0, wx.CENTER, 10 )
326	self.sizer_new_smear.Add( self.smear_data_right,0, wx.CENTER, 10 )
327
328	self.sizer_set_smearer.Add( self.smear_message_new_s,0, wx.CENTER, 10)
329	self.sizer_set_smearer.Add( self.smear_message_new_p,0, wx.CENTER, 10)
330	self.sizer_set_smearer.Add((5,2))
331	self.sizer_set_smearer.Add( self.sizer_new_smear,0, wx.CENTER, 10 )
332
333	# add all to chi2 sizer
334	sizer_smearer_box.Add(self.sizer_set_smearer)
335	sizer_chi2.Add(sizer_smearer_box)
336	sizer_chi2.Add((-1,5))
337
338	# hide all smear messages and textctrl
339	self._hide_all_smear_info()
340
341	# get smear_selection
342	self.current_smearer= smear_selection( self.data )
343
344	# Show only the relevant smear messages, etc
345	if self.current_smearer == None:
346	if not is_2Ddata:
347	self.smear_description_none.Show(True)
348	self.enable_smearer.Disable()
349	else:
350	self.smear_description_none.Show(True)
351	#self.smear_description_2d.Show(True)
352	#self.pinhole_smearer.Disable()
353	self.slit_smearer.Disable()
354	#self.enable_smearer.Disable()
355	else: self._show_smear_sizer()
356	boxsizer_range.Add(self.sizer_set_masking)
357
358	#Set sizer for Fitting section
359	self._set_range_sizer( title=title,box_sizer=boxsizer_range, object1=sizer_chi2, object= sizer_fit)
360
361	def _fill_datainfo_sizer(self):
362	"""
363	fill sizer 0 with data info
364	"""
365	## no loaded data , don't fill the sizer
366	if self.data is None:
367	data_min = ""
368	data_max = ""
369	data_name = ""
370	else:
371	data_name = self.data.name
372	#set maximum range for x in linear scale
373	if not hasattr(self.data,"data"): #Display only for 1D data fit
374	# Minimum value of data
375	data_min = min(self.data.x)
376	# Maximum value of data
377	data_max = max(self.data.x)
378	else:
379	## Minimum value of data
380	data_min = 0
381	x = max(math.fabs(self.data.xmin), math.fabs(self.data.xmax))
382	y = max(math.fabs(self.data.ymin), math.fabs(self.data.ymax))
383	## Maximum value of data
384	data_max = math.sqrt(xx + yy)
385
386	box_description= wx.StaticBox(self, -1, 'Data')
387	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
388	#----------------------------------------------------------
389	sizer_data = wx.BoxSizer(wx.HORIZONTAL)
390	#Filling the sizer containing data related fields
391	#self.dataSource = wx.StaticText(self, -1,str(self.data.name))
392	self.dataSource = BGTextCtrl(self, -1)
393	self.dataSource.SetValue(str(data_name))
394	#self.dataSource.SetEditable(False)
395	self.dataSource.SetMinSize((_DATA_BOX_WIDTH, -1))
396	sizer_data.Add(wx.StaticText(self, -1, 'Source Name : '))
397	sizer_data.Add(self.dataSource )
398	sizer_data.Add( (0,5) )
399
400	#---------sizer 2 draw--------------------------------
401	text4_3 = wx.StaticText(self, -1, 'Total Q Range (1/A)',
402	style=wx.ALIGN_LEFT)
403	sizer_range = wx.BoxSizer(wx.HORIZONTAL)
404	sizer_range.Add( text4_3 ,0, wx.RIGHT, 10)
405	self.minimum_q = BGTextCtrl(self, -1, size=(_BOX_WIDTH,20))
406	self.minimum_q.SetValue(str(data_min))
407	#self.minimum_q.SetEditable(False)
408	self.maximum_q = BGTextCtrl(self, -1,size=(_BOX_WIDTH,20))
409	self.maximum_q.SetValue(str(data_max))
410	#self.maximum_q.SetEditable(False)
411	sizer_range.Add(wx.StaticText(self, -1, "Min: "),0, wx.LEFT, 10)
412	sizer_range.Add(self.minimum_q,0, wx.LEFT, 10)
413	sizer_range.Add(wx.StaticText(self, -1, "Max: "),0, wx.LEFT, 10)
414	sizer_range.Add(self.maximum_q,0, wx.LEFT, 10)
415
416	## set q range to plot
417	self.qmin_x = data_min
418	self.qmax_x = data_max
419
420	boxsizer1.Add(sizer_data,0, wx.ALL, 10)
421	boxsizer1.Add(sizer_range, 0 , wx.LEFT, 10)
422	#------------------------------------------------------------
423	self.sizer0.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
424	self.sizer0.Layout()
425
426	def _fill_model_sizer(self, sizer):
427	"""
428	fill sizer containing model info
429	"""
430	##Add model function Details button in fitpanel.
431	##The following 3 lines are for Mac. Let JHC know before modifying...
432	title = "Model"
433	box_description= wx.StaticBox(self, -1,str(title))
434	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
435
436	id = wx.NewId()
437	self.model_help =wx.Button(self,id,'Details', size=(80,23))
438	self.model_help.Bind(wx.EVT_BUTTON, self.on_model_help_clicked,id=id)
439	self.model_help.SetToolTipString("Model Function Help")
440
441	## class base method to add view 2d button
442	self._set_model_sizer(sizer=sizer, box_sizer=boxsizer1, title="Model",object=self.model_help )
443
444	def _set_sizer_dispersion(self, dispersity):
445	"""
446	draw sizer with gaussian dispersity parameters
447	"""
448	self.fittable_param=[]
449	self.fixed_param=[]
450	self.orientation_params_disp=[]
451
452	self.sizer4_4.Clear(True)
453	if self.model==None:
454	##no model is selected
455	return
456	if not self.enable_disp.GetValue():
457	## the user didn't select dispersity display
458	return
459
460	self._reset_dispersity()
461
462	# Create the dispersion objects
463	for item in self.model.dispersion.keys():
464	#disp_model = GaussianDispersion()
465	disp_model = dispersity()
466	self._disp_obj_dict[item] = disp_model
467	self.model.set_dispersion(item, disp_model)
468	self.state._disp_obj_dict[item]= disp_model
469
470
471	ix=0
472	iy=1
473	disp = wx.StaticText(self, -1, ' ')
474	self.sizer4_4.Add(disp,( iy, ix),(1,1),
475	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
476	ix += 1
477	values = wx.StaticText(self, -1, 'Sigma (STD)')
478	values.SetToolTipString("Polydispersity multiplied by the value of the original parameter.")
479	self.sizer4_4.Add(values,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
480	ix +=2
481	self.text_disp_1 = wx.StaticText(self, -1, '')
482	self.sizer4_4.Add( self.text_disp_1,(iy, ix),(1,1),\
483	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
484	self.text_disp_1.Hide()
485
486
487	ix +=1
488	self.text_disp_min = wx.StaticText(self, -1, 'Min')
489	self.sizer4_4.Add(self.text_disp_min,(iy, ix),(1,1),\
490	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
491	self.text_disp_min.Hide()
492	ix +=1
493	self.text_disp_max = wx.StaticText(self, -1, 'Max')
494	self.sizer4_4.Add(self.text_disp_max,(iy, ix),(1,1),\
495	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
496	self.text_disp_max.Hide()
497
498
499	ix += 1
500	npts = wx.StaticText(self, -1, 'Npts')
501	npts.SetToolTipString("Number of points for weighting.")
502	self.sizer4_4.Add(npts,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
503	ix += 1
504	nsigmas = wx.StaticText(self, -1, 'Nsigmas')
505	nsigmas.SetToolTipString("Number of sigmas between which the range of the distribution function will be used for weighting. The value '3' covers 99.5% for Gaussian distribution function.")
506	self.sizer4_4.Add(nsigmas,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
507
508	if self.engine_type=="park":
509	self.text_disp_max.Show(True)
510	self.text_disp_min.Show(True)
511
512	for item in self.model.dispersion.keys():
513	if not item in self.model.orientation_params:
514	if not self.disp_cb_dict.has_key(item):
515	self.disp_cb_dict[item]= None
516	name1=item+".width"
517	name2=item+".npts"
518	name3=item+".nsigmas"
519	if not self.model.details.has_key(name1):
520	self.model.details [name1] = ["",None,None]
521
522	iy += 1
523	for p in self.model.dispersion[item].keys():
524
525	if p=="width":
526	ix = 0
527	cb = wx.CheckBox(self, -1, name1, (10, 10))
528	cb.SetToolTipString("Check for fitting")
529	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
530	self.sizer4_4.Add( cb,( iy, ix),(1,1),
531	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
532	ix = 1
533	value= self.model.getParam(name1)
534	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
535	style=wx.TE_PROCESS_ENTER)
536	ctl1.SetToolTipString("Polydispersity multiplied by the value of '%s'."%item)
537	ctl1.SetValue(str (format_number(value)))
538	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
539	## text to show error sign
540	ix = 2
541	text2=wx.StaticText(self, -1, '+/-')
542	self.sizer4_4.Add(text2,(iy, ix),(1,1),
543	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
544	text2.Hide()
545
546	ix = 3
547	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
548
549	self.sizer4_4.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
550
551	ctl2.Hide()
552
553	ix = 4
554	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
555	text_enter_callback = self._onparamRangeEnter)
556
557	self.sizer4_4.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
558	ctl3.Hide()
559
560	ix = 5
561	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
562	text_enter_callback = self._onparamRangeEnter)
563
564	self.sizer4_4.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
565
566	ctl4.Hide()
567
568	if self.engine_type=="park":
569	ctl3.Show(True)
570	ctl4.Show(True)
571
572	self.fittable_param.append([cb,name1,ctl1,text2,
573	ctl2, ctl3, ctl4,None])
574
575	elif p=="npts":
576	ix = 6
577	value= self.model.getParam(name2)
578	Tctl = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
579	style=wx.TE_PROCESS_ENTER)
580
581	Tctl.SetValue(str (format_number(value)))
582	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
583	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
584	self.fixed_param.append([None,name2, Tctl,None,None,
585	None, None,None])
586	elif p=="nsigmas":
587	ix = 7
588	value= self.model.getParam(name3)
589	Tct2 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
590	style=wx.TE_PROCESS_ENTER)
591
592	Tct2.SetValue(str (format_number(value)))
593	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
594	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
595	ix +=1
596	self.sizer4_4.Add((20,20), (iy,ix),(1,1),
597	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
598
599	self.fixed_param.append([None,name3, Tct2
600	,None,None,None, None,None])
601
602	ix =0
603	iy +=1
604	self.sizer4_4.Add((20,20),(iy,ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
605	for item in self.model.dispersion.keys():
606	if item in self.model.orientation_params:
607	if not self.disp_cb_dict.has_key(item):
608	self.disp_cb_dict[item]= None
609	name1=item+".width"
610	name2=item+".npts"
611	name3=item+".nsigmas"
612	if not self.model.details.has_key(name1):
613	self.model.details [name1] = ["",None,None]
614
615
616	iy += 1
617	for p in self.model.dispersion[item].keys():
618
619	if p=="width":
620	ix = 0
621	cb = wx.CheckBox(self, -1, name1, (10, 10))
622	cb.SetToolTipString("Check for fitting")
623	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
624	self.sizer4_4.Add( cb,( iy, ix),(1,1),
625	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
626	if self.data.__class__.__name__ =="Data2D":
627	cb.Show(True)
628	elif cb.IsShown():
629	cb.Hide()
630	ix = 1
631	value= self.model.getParam(name1)
632	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
633	style=wx.TE_PROCESS_ENTER)
634	ctl1.SetToolTipString("Polydispersity multiplied by the value of '%s'."%item)
635	ctl1.SetValue(str (format_number(value)))
636	if self.data.__class__.__name__ =="Data2D":
637	ctl1.Show(True)
638	elif ctl1.IsShown():
639	ctl1.Hide()
640	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
641	## text to show error sign
642	ix = 2
643	text2=wx.StaticText(self, -1, '+/-')
644	self.sizer4_4.Add(text2,(iy, ix),(1,1),
645	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
646	text2.Hide()
647
648	ix = 3
649	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
650
651	self.sizer4_4.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
652	ctl2.Hide()
653
654	ix = 4
655	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
656	text_enter_callback = self._onparamRangeEnter)
657
658	self.sizer4_4.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
659
660	ctl3.Hide()
661
662	ix = 5
663	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
664	text_enter_callback = self._onparamRangeEnter)
665	self.sizer4_4.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
666	ctl4.Hide()
667	#if self.data.__class__.__name__ =="Data2D":
668	#ctl4.Enable(True)
669	#elif ctl4.Shown():
670	#ctl4.Hide()
671
672	if self.engine_type=="park" and self.data.__class__.__name__ =="Data2D":
673	ctl3.Show(True)
674	ctl4.Show(True)
675
676
677
678
679	self.fittable_param.append([cb,name1,ctl1,text2,
680	ctl2, ctl3, ctl4,None])
681	self.orientation_params_disp.append([cb,name1,ctl1,text2,
682	ctl2, ctl3, ctl4,None])
683	elif p=="npts":
684	ix = 6
685	value= self.model.getParam(name2)
686	Tctl = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
687	style=wx.TE_PROCESS_ENTER)
688
689	Tctl.SetValue(str (format_number(value)))
690	if self.data.__class__.__name__ =="Data2D":
691	Tctl.Show(True)
692	else:
693	Tctl.Hide()
694	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
695	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
696	self.fixed_param.append([None,name2, Tctl,None,None,
697	None, None,None])
698	self.orientation_params_disp.append([None,name2, Tctl,None,None,
699	None, None,None])
700	elif p=="nsigmas":
701	ix = 7
702	value= self.model.getParam(name3)
703	Tct2 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
704	style=wx.TE_PROCESS_ENTER)
705
706	Tct2.SetValue(str (format_number(value)))
707	if self.data.__class__.__name__ =="Data2D":
708	Tct2.Show(True)
709	else:
710	Tct2.Hide()
711	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
712	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
713	ix +=1
714
715	self.fixed_param.append([None,name3, Tct2
716	,None,None, None, None,None])
717
718	self.orientation_params_disp.append([None,name3, Tct2
719	,None,None, None, None,None])
720
721	self.state.disp_cb_dict = copy.deepcopy(self.disp_cb_dict)
722
723	self.state.model = self.model.clone()
724	## save state into
725	self.state.cb1 = self.cb1.GetValue()
726	self._copy_parameters_state(self.parameters, self.state.parameters)
727	self._copy_parameters_state(self.orientation_params_disp,
728	self.state.orientation_params_disp)
729	self._copy_parameters_state(self.fittable_param, self.state.fittable_param)
730	self._copy_parameters_state(self.fixed_param, self.state.fixed_param)
731
732
733	wx.PostEvent(self.parent, StatusEvent(status=\
734	" Selected Distribution: Gaussian"))
735	#Fill the list of fittable parameters
736	self.select_all_param(event=None)
737
738	self.Layout()
739
740	def _onFit(self, event):
741	"""
742	Allow to fit
743	"""
744	#make sure all parameter values are updated.
745	if self.check_invalid_panel():
746	return
747	if self.model ==None:
748	msg="Please select a Model first..."
749	wx.MessageBox(msg, 'Info')
750	wx.PostEvent(self.manager.parent, StatusEvent(status=\
751	"Fit: %s"%msg))
752	return
753
754	flag = self._update_paramv_on_fit()
755
756	if not flag:
757	msg= "Fitting range or parameters are invalid"
758	wx.PostEvent(self.parent.parent, StatusEvent(status= msg ))
759	return
760
761	if len(self.param_toFit) <= 0:
762	msg= "Select at least one parameter to fit"
763	wx.PostEvent(self.parent.parent, StatusEvent(status= msg ))
764	return
765
766	self.select_param(event =None)
767
768	#Clear errors if exist from previous fitting
769	#self._clear_Err_on_Fit()
770
771	# Remove or do not allow fitting on the Q=0 point, especially when y(q=0)=None at x[0].
772	self.qmin_x = float(self.qmin.GetValue())
773	self.qmax_x = float( self.qmax.GetValue())
774	self.manager._reset_schedule_problem( value=0)
775	self.manager.schedule_for_fit( value=1,page=self,fitproblem =None)
776	self.manager.set_fit_range(page= self,qmin= self.qmin_x, qmax= self.qmax_x)
777
778	#single fit
779	self.manager.onFit()
780	## allow stopping the fit
781	#if self.engine_type=="scipy":
782	# self.btFit.SetLabel("Stop")
783	# self.btFit.Unbind(event=wx.EVT_BUTTON, id= self.btFit.GetId())
784	# self.btFit.Bind(event= wx.EVT_BUTTON, handler=self._StopFit, id=self.btFit.GetId())
785	#else:
786	# self.btFit.SetLabel("Fit")
787	# self.btFit.Bind(event= wx.EVT_BUTTON, handler=self._onFit, id=self.btFit.GetId())
788
789	def _StopFit(self, event):
790	"""
791	Stop fit
792	"""
793	self.btFit.SetLabel("Fit")
794	if self.engine_type=="scipy":
795	self.manager.stop_fit()
796	self.btFit.Unbind(event=wx.EVT_BUTTON, id=self.btFit.GetId())
797	self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._onFit,id=self.btFit.GetId())
798
799
800	def _on_select_model(self, event=None):
801	"""
802	call back for model selection
803	"""
804	self._on_select_model_helper()
805	self.set_model_param_sizer(self.model)
806
807	self.enable_disp.SetValue(False)
808	self.disable_disp.SetValue(True)
809	try:
810	self.set_dispers_sizer()
811	except:
812	pass
813	self.btFit.SetFocus()
814	self.state.enable_disp = self.enable_disp.GetValue()
815	self.state.disable_disp = self.disable_disp.GetValue()
816	self.state.pinhole_smearer = self.pinhole_smearer.GetValue()
817	self.state.slit_smearer = self.slit_smearer.GetValue()
818
819	self.state.structurecombobox = self.structurebox.GetCurrentSelection()
820	self.state.formfactorcombobox = self.formfactorbox.GetCurrentSelection()
821
822	if self.model != None:
823	try:
824	temp_smear= None
825	if self.enable_smearer.GetValue():
826	temp_smear= self.smearer
827	#self.compute_chisqr(temp_smear)
828	except:
829	## error occured on chisqr computation
830	pass
831	## event to post model to fit to fitting plugins
832	(ModelEventbox, EVT_MODEL_BOX) = wx.lib.newevent.NewEvent()
833	if self.data is not None and self.data.__class__.__name__ !="Data2D":
834	## set smearing value whether or not the data contain the smearing info
835	evt = ModelEventbox(model=self.model,
836	smearer=temp_smear,
837	qmin= float(self.qmin_x),
838	qmax= float(self.qmax_x))
839	else:
840	evt = ModelEventbox(model=self.model)
841
842	self.manager._on_model_panel(evt=evt)
843	self.state.model = self.model.clone()
844	self.state.model.name = self.model.name
845	if event is not None:
846	self._draw_model()
847	if event !=None:
848	#self._undo.Enable(True)
849	## post state to fit panel
850	event = PageInfoEvent(page = self)
851	wx.PostEvent(self.parent, event)
852
853
854	def _onparamEnter(self,event):
855	"""
856	when enter value on panel redraw model according to changed
857	"""
858	if self.model ==None:
859	msg="Please select a Model first..."
860	wx.MessageBox(msg, 'Info')
861	#wx.PostEvent(self.manager.parent, StatusEvent(status=\
862	# "Parameters: %s"%msg))
863	return
864
865	#default flag
866	flag = False
867	self.fitrange = True
868	#get event object
869	tcrtl= event.GetEventObject()
870	wx.PostEvent(self.manager.parent, StatusEvent(status=" \
871	updating ... ",type="update"))
872	#Clear msg if previously shown.
873	msg= ""
874	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
875
876	if check_float(tcrtl):
877	flag = self._onparamEnter_helper()
878	self.set_npts2fit()
879	if self.fitrange:
880	temp_smearer = None
881	if not self.disable_smearer.GetValue():
882	temp_smearer= self.current_smearer
883	## set smearing value whether or not the data contain the smearing info
884	if self.slit_smearer.GetValue():
885	flag1 = self.update_slit_smear()
886	flag = flag or flag1
887	elif self.pinhole_smearer.GetValue():
888	flag1 = self.update_pinhole_smear()
889	flag = flag or flag1
890	elif self.data.__class__.__name__ !="Data2D":
891	self.manager.set_smearer(smearer=temp_smearer, qmin= float(self.qmin_x),
892	qmax= float(self.qmax_x))
893	if flag:
894	#self.compute_chisqr(smearer= temp_smearer)
895
896	## new state posted
897	if self.state_change:
898	#self._undo.Enable(True)
899	event = PageInfoEvent(page = self)
900	wx.PostEvent(self.parent, event)
901	self.state_change= False
902	else:
903	return # invalid fit range: do nothing here: msg already displayed in validate
904	else:
905	self.save_current_state()
906	msg= "Cannot Plot :Must enter a number!!! "
907	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
908
909	self.save_current_state()
910	return
911
912	def _onparamRangeEnter(self, event):
913	"""
914	Check validity of value enter in the parameters range field
915	"""
916	if self.check_invalid_panel():
917	return
918	tcrtl= event.GetEventObject()
919	#Clear msg if previously shown.
920	msg= ""
921	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
922	# Flag to register when a parameter has changed.
923	is_modified = False
924	if tcrtl.GetValue().lstrip().rstrip()!="":
925	try:
926	value = float(tcrtl.GetValue())
927	tcrtl.SetBackgroundColour(wx.WHITE)
928	self._check_value_enter(self.fittable_param ,is_modified)
929	self._check_value_enter(self.parameters ,is_modified)
930	except:
931	tcrtl.SetBackgroundColour("pink")
932	msg= "Model Error:wrong value entered : %s"% sys.exc_value
933	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
934	return
935	else:
936	tcrtl.SetBackgroundColour(wx.WHITE)
937
938	#self._undo.Enable(True)
939	self.save_current_state()
940	event = PageInfoEvent(page = self)
941	wx.PostEvent(self.parent, event)
942	self.state_change= False
943
944
945	def _onQrangeEnter(self, event):
946	"""
947	Check validity of value enter in the Q range field
948	"""
949	if self.check_invalid_panel():
950	return
951	tcrtl= event.GetEventObject()
952	#Clear msg if previously shown.
953	msg= ""
954	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
955	# Flag to register when a parameter has changed.
956	is_modified = False
957	if tcrtl.GetValue().lstrip().rstrip()!="":
958	try:
959	value = float(tcrtl.GetValue())
960	tcrtl.SetBackgroundColour(wx.WHITE)
961
962	# If qmin and qmax have been modified, update qmin and qmax
963	if self._validate_qrange( self.qmin, self.qmax):
964	tempmin = float(self.qmin.GetValue())
965	if tempmin != self.qmin_x:
966	self.qmin_x = tempmin
967	tempmax = float(self.qmax.GetValue())
968	if tempmax != self.qmax_x:
969	self.qmax_x = tempmax
970	else:
971	tcrtl.SetBackgroundColour("pink")
972	msg= "Model Error:wrong value entered : %s"% sys.exc_value
973	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
974	return
975
976	except:
977	tcrtl.SetBackgroundColour("pink")
978	msg= "Model Error:wrong value entered : %s"% sys.exc_value
979	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
980	return
981	#Check if # of points for theory model are valid(>0).
982	# check for 2d
983	if self.data.__class__.__name__ =="Data2D":
984	# set mask
985	radius= numpy.sqrt( self.data.qx_dataself.data.qx_data + self.data.qy_dataself.data.qy_data )
986	index_data = ((self.qmin <= radius)&(radius<= self.qmax))
987	index_data = (index_data)&(self.data.mask)
988	index_data = (index_data)&(numpy.isfinite(self.data.data))
989	if len(index_data[index_data]) < 10:
990	msg= "Cannot Plot :No or too little npts in that data range!!! "
991	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
992	return
993	else:
994	self.data.mask = index_data
995	self.Npts_fit.Setvalue(str(len(self.data.mask)))
996	else:
997	index_data = ((self.qmin <= self.data.x)&(self.data.x <= self.qmax))
998	self.Npts_fit.SetValue(str(len(self.data.x[index_data])))
999
1000	else:
1001	tcrtl.SetBackgroundColour("pink")
1002	msg= "Model Error:wrong value entered!!!"
1003	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
1004
1005	self._draw_model()
1006	##update chi2
1007	#self.compute_chisqr(smearer= temp_smearer)
1008	#self._undo.Enable(True)
1009	self.save_current_state()
1010	event = PageInfoEvent(page = self)
1011	wx.PostEvent(self.parent, event)
1012	self.state_change= False
1013	return
1014
1015	def _clear_Err_on_Fit(self):
1016	"""
1017	hide the error text control shown
1018	after fitting
1019	"""
1020
1021	if hasattr(self,"text2_3"):
1022	self.text2_3.Hide()
1023
1024	if len(self.parameters)>0:
1025	for item in self.parameters:
1026	#Skip t ifhe angle parameters if 1D data
1027	if self.data.__class__.__name__ !="Data2D":
1028	if item in self.orientation_params:
1029	continue
1030	if item in self.param_toFit:
1031	continue
1032	## hide statictext +/-
1033	if item[3]!=None and item[3].IsShown():
1034	item[3].Hide()
1035	## hide textcrtl for error after fit
1036	if item[4]!=None and item[4].IsShown():
1037	item[4].Hide()
1038
1039	if len(self.fittable_param)>0:
1040	for item in self.fittable_param:
1041	#Skip t ifhe angle parameters if 1D data
1042	if self.data.__class__.__name__ !="Data2D":
1043	if item in self.orientation_params:
1044	continue
1045	if item in self.param_toFit:
1046	continue
1047	## hide statictext +/-
1048	if item[3]!=None and item[3].IsShown():
1049	item[3].Hide()
1050	## hide textcrtl for error after fit
1051	if item[4]!=None and item[4].IsShown():
1052	item[4].Hide()
1053	return
1054
1055	def _get_defult_custom_smear(self):
1056	"""
1057	Get the defult values for custum smearing.
1058	"""
1059	# get the default values
1060	if self.dxl == None: self.dxl = 0.0
1061	if self.dxw == None: self.dxw = ""
1062	if self.dx_min == None: self.dx_min = SMEAR_SIZE_L
1063	if self.dx_max == None: self.dx_max = SMEAR_SIZE_H
1064
1065	def _get_smear_info(self):
1066	"""
1067	Get the smear info from data.
1068
1069	:return: self.smear_type, self.dq_l and self.dq_r,
1070	respectively the type of the smear, dq_min and dq_max for pinhole smear data
1071	while dxl and dxw for slit smear
1072
1073	"""
1074
1075	# default
1076	self.smear_type = None
1077	self.dq_l = None
1078	self.dq_r = None
1079	data = self.data
1080	if self.data is None:
1081	return
1082	elif self.data.__class__.__name__ == 'Data2D':
1083	if data.dqx_data == None or data.dqy_data ==None:
1084	return
1085	elif self.smearer != None and (data.dqx_data.any()!=0) and (data.dqx_data.any()!=0):
1086	self.smear_type = "Pinhole2d"
1087	self.dq_l = format_number(numpy.average(data.dqx_data))
1088	self.dq_r = format_number(numpy.average(data.dqy_data))
1089	return
1090	else:
1091	return
1092	# check if it is pinhole smear and get min max if it is.
1093	if data.dx != None and all(data.dx !=0):
1094	self.smear_type = "Pinhole"
1095	self.dq_l = data.dx[0]
1096	self.dq_r = data.dx[-1]
1097
1098	# check if it is slit smear and get min max if it is.
1099	elif data.dxl != None or data.dxw != None:
1100	self.smear_type = "Slit"
1101	if data.dxl != None and all(data.dxl !=0):
1102	self.dq_l = data.dxl[0]
1103	if data.dxw != None and all(data.dxw !=0):
1104	self.dq_r = data.dxw[0]
1105	#return self.smear_type,self.dq_l,self.dq_r
1106
1107	def _show_smear_sizer(self):
1108	"""
1109	Show only the sizers depending on smear selection
1110	"""
1111	# smear disabled
1112	if self.disable_smearer.GetValue():
1113	self.smear_description_none.Show(True)
1114	# 2Dsmear
1115	elif self._is_2D():
1116	self.smear_description_accuracy_type.Show(True)
1117	self.smear_accuracy.Show(True)
1118	self.smear_description_accuracy_type.Show(True)
1119	self.smear_description_2d.Show(True)
1120	self.smear_description_2d_x.Show(True)
1121	self.smear_description_2d_y.Show(True)
1122	if self.pinhole_smearer.GetValue():
1123	self.smear_pinhole_min.Show(True)
1124	self.smear_pinhole_max.Show(True)
1125	# smear from data
1126	elif self.enable_smearer.GetValue():
1127
1128	self.smear_description_dqdata.Show(True)
1129	if self.smear_type != None:
1130	self.smear_description_smear_type.Show(True)
1131	if self.smear_type == 'Slit':
1132	self.smear_description_slit_height.Show(True)
1133	self.smear_description_slit_width.Show(True)
1134	elif self.smear_type == 'Pinhole':
1135	self.smear_description_pin_min.Show(True)
1136	self.smear_description_pin_max.Show(True)
1137	self.smear_description_smear_type.Show(True)
1138	self.smear_description_type.Show(True)
1139	self.smear_data_left.Show(True)
1140	self.smear_data_right.Show(True)
1141	# custom pinhole smear
1142	elif self.pinhole_smearer.GetValue():
1143	if self.smear_type == 'Pinhole':
1144	self.smear_message_new_p.Show(True)
1145	self.smear_description_pin_min.Show(True)
1146	self.smear_description_pin_max.Show(True)
1147
1148	self.smear_pinhole_min.Show(True)
1149	self.smear_pinhole_max.Show(True)
1150	# custom slit smear
1151	elif self.slit_smearer.GetValue():
1152	self.smear_message_new_s.Show(True)
1153	self.smear_description_slit_height.Show(True)
1154	self.smear_slit_height.Show(True)
1155	self.smear_description_slit_width.Show(True)
1156	self.smear_slit_width.Show(True)
1157
1158	def _hide_all_smear_info(self):
1159	"""
1160	Hide all smearing messages in the set_smearer sizer
1161	"""
1162	self.smear_description_none.Hide()
1163	self.smear_description_dqdata.Hide()
1164	self.smear_description_type.Hide()
1165	self.smear_description_smear_type.Hide()
1166	self.smear_description_accuracy_type.Hide()
1167	self.smear_description_2d_x.Hide()
1168	self.smear_description_2d_y.Hide()
1169	self.smear_description_2d.Hide()
1170
1171	self.smear_accuracy.Hide()
1172	self.smear_data_left.Hide()
1173	self.smear_data_right.Hide()
1174	self.smear_description_pin_min.Hide()
1175	self.smear_pinhole_min.Hide()
1176	self.smear_description_pin_max.Hide()
1177	self.smear_pinhole_max.Hide()
1178	self.smear_description_slit_height.Hide()
1179	self.smear_slit_height.Hide()
1180	self.smear_description_slit_width.Hide()
1181	self.smear_slit_width.Hide()
1182	self.smear_message_new_p.Hide()
1183	self.smear_message_new_s.Hide()
1184
1185	def _set_accuracy_list(self):
1186	"""
1187	Set the list of an accuracy in 2D custum smear: Xhigh, High, Med, or Low
1188	"""
1189	# list of accuracy choices
1190	list = ['Low','Med','High','Xhigh']
1191	for idx in range(len(list)):
1192	self.smear_accuracy.Append(list[idx],idx)
1193
1194	def _on_select_accuracy(self,event):
1195	"""
1196	Select an accuracy in 2D custom smear: Xhigh, High, Med, or Low
1197	"""
1198	#event.Skip()
1199	# Check if the accuracy is same as before
1200	#self.smear2d_accuracy = event.GetEventObject().GetValue()
1201	self.smear2d_accuracy = self.smear_accuracy.GetValue()
1202	if self.pinhole_smearer.GetValue():
1203	self.onPinholeSmear(event=None)
1204	else:
1205	self.onSmear(event=None)
1206	if self.current_smearer != None:
1207	self.current_smearer.set_accuracy(accuracy = self.smear2d_accuracy)
1208	event.Skip()
1209
1210	def _onMask(self, event):
1211	"""
1212	Build a panel to allow to edit Mask
1213	"""
1214
1215	from sans.guiframe.local_perspectives.plotting.masking import MaskPanel as MaskDialog
1216
1217	self.panel = MaskDialog(self, data=self.data,id =-1 )
1218	self.panel.Bind(wx.EVT_CLOSE, self._draw_masked_model)
1219	self.panel.ShowModal()
1220	#wx.PostEvent(self.parent, event)
1221
1222	def _draw_masked_model(self,event):
1223	"""
1224	Draw model image w/mask
1225	"""
1226	event.Skip()
1227
1228	is_valid_qrange = self._update_paramv_on_fit()
1229
1230	if is_valid_qrange:
1231	# try re draw the model plot if it exists
1232	self._draw_model()
1233	self.panel.Destroy() # frame
1234	self.set_npts2fit()
1235	elif self.model == None:
1236	self.panel.Destroy()
1237	self.set_npts2fit()
1238	msg= "No model is found on updating MASK in the model plot... "
1239	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
1240	else:
1241	msg = ' Please consider your Q range, too.'
1242	self.panel.ShowMessage(msg)
1243
1244	def set_data(self, data):
1245	"""
1246	reset the current data
1247	"""
1248	self.data = data
1249	if self.data is None:
1250	data_min = ""
1251	data_max = ""
1252	data_name = ""
1253	self.formfactorbox.Disable()
1254	self.structurebox.Disable()
1255	else:
1256	self.smearer = smear_selection( self.data )
1257	self.disable_smearer.SetValue(True)
1258	if self.smearer == None:
1259	self.enable_smearer.Disable()
1260	else:
1261	self.enable_smearer.Enable()
1262
1263	# more disables for 2D
1264	if self.data.__class__.__name__ =="Data2D":
1265	self.slit_smearer.Disable()
1266	self.default_mask = copy.deepcopy(self.data.mask)
1267
1268	self.formfactorbox.Enable()
1269	self.structurebox.Enable()
1270	data_name = self.data.name
1271	#set maximum range for x in linear scale
1272	if not hasattr(self.data,"data"): #Display only for 1D data fit
1273	# Minimum value of data
1274	data_min = min(self.data.x)
1275	# Maximum value of data
1276	data_max = max(self.data.x)
1277	#number of total data points
1278	self.Npts_total.SetValue(str(len(self.data.x)))
1279	#default:number of data points selected to fit
1280	self.Npts_fit.SetValue(str(len(self.data.x)))
1281	self.btEditMask.Disable()
1282	self.EditMask_title.Disable()
1283	else:
1284	## Minimum value of data
1285	data_min = 0
1286	x = max(math.fabs(self.data.xmin), math.fabs(self.data.xmax))
1287	y = max(math.fabs(self.data.ymin), math.fabs(self.data.ymax))
1288	## Maximum value of data
1289	data_max = math.sqrt(xx + yy)
1290	#number of total data points
1291	self.Npts_total.SetValue(str(len(self.data.data)))
1292	#default:number of data points selected to fit
1293	self.Npts_fit.SetValue(str(len(self.data.data)))
1294	self.btEditMask.Enable()
1295	self.EditMask_title.Enable()
1296	self.dataSource.SetValue(data_name)
1297	self.qmin_x = data_min
1298	self.qmax_x = data_max
1299	self.minimum_q.SetValue(str(data_min))
1300	self.maximum_q.SetValue(str(data_max))
1301	self.qmin.SetValue(str(data_min))
1302	self.qmax.SetValue(str(data_max))
1303	self.qmin.SetBackgroundColour("white")
1304	self.qmax.SetBackgroundColour("white")
1305	self.state.data = data
1306	self.state.qmin = self.qmin_x
1307	self.state.qmax = self.qmax_x
1308
1309	def reset_page(self, state,first=False):
1310	"""
1311	reset the state
1312	"""
1313	self.reset_page_helper(state)
1314	#import sans.guiframe.gui_manager
1315	#evt = ModelEventbox(model=state.model)
1316	#wx.PostEvent(self.event_owner, evt)
1317
1318	if self.engine_type != None:
1319	self.manager._on_change_engine(engine=self.engine_type)
1320
1321	self.select_param(event = None)
1322	#Save state_fit
1323	self.save_current_state_fit()
1324	self._lay_out()
1325	self.Refresh()
1326
1327	def get_range(self):
1328	"""
1329	return the fitting range
1330	"""
1331	return float(self.qmin_x) , float(self.qmax_x)
1332
1333	def get_npts2fit(self):
1334	"""
1335	return numbers of data points within qrange
1336
1337	:Note: This is for Park where chi2 is not normalized by Npts of fit
1338
1339	"""
1340	npts2fit = 0
1341	qmin,qmax = self.get_range()
1342	if self.data.__class__.__name__ =="Data2D":
1343	radius= numpy.sqrt( self.data.qx_dataself.data.qx_data + self.data.qy_dataself.data.qy_data )
1344	index_data = (self.qmin_x <= radius)&(radius<= self.qmax_x)
1345	index_data= (index_data)&(self.data.mask)
1346	index_data = (index_data)&(numpy.isfinite(self.data.data))
1347	npts2fit = len(self.data.data[index_data])
1348	else:
1349	for qx in self.data.x:
1350	if qx >= qmin and qx <= qmax:
1351	npts2fit += 1
1352	return npts2fit
1353
1354	def set_npts2fit(self):
1355	"""
1356	setValue Npts for fitting
1357	"""
1358	self.Npts_fit.SetValue(str(self.get_npts2fit()))
1359
1360	def get_chi2(self):
1361	"""
1362	return the current chi2
1363	"""
1364	return self.tcChi.GetValue()
1365
1366	def get_param_list(self):
1367	"""
1368	:return self.param_toFit: list containing references to TextCtrl
1369	checked.Theses TextCtrl will allow reference to parameters to fit.
1370
1371	:raise: if return an empty list of parameter fit will nnote work
1372	properly so raise ValueError,"missing parameter to fit"
1373	"""
1374	if self.param_toFit !=[]:
1375	return self.param_toFit
1376	else:
1377	raise ValueError,"missing parameter to fit"
1378
1379	def onsetValues(self,chisqr,p_name, out,cov):
1380	"""
1381	Build the panel from the fit result
1382
1383	:param chisqr: Value of the goodness of fit metric
1384	:param p_name: the name of parameters
1385	:param out: list of parameter with the best value found during fitting
1386	:param cov: Covariance matrix
1387
1388	"""
1389	if out == None or not numpy.isfinite(chisqr):
1390	raise ValueError,"Fit error occured..."
1391
1392	is_modified = False
1393	has_error = False
1394
1395	#Hide textctrl boxes of errors.
1396	self._clear_Err_on_Fit()
1397
1398	#Check if chi2 is finite
1399	if chisqr != None or numpy.isfinite(chisqr):
1400	#format chi2
1401	if self.engine_type == "park":
1402	npt_fit = float(self.get_npts2fit())
1403	if npt_fit > 0:
1404	chisqr =chisqr/npt_fit
1405	chi2 = format_number(chisqr)
1406	self.tcChi.SetValue(chi2)
1407	self.tcChi.Refresh()
1408	else:
1409	self.tcChi.SetValue("-")
1410
1411	#Hide error title
1412	if self.text2_3.IsShown():
1413	self.text2_3.Hide()
1414
1415	try:
1416	n = self.disp_box.GetCurrentSelection()
1417	dispersity= self.disp_box.GetClientData(n)
1418	if dispersity !=None and self.enable_disp.GetValue():
1419	name= dispersity.__name__
1420	if name == "GaussianDispersion":
1421	if hasattr(self,"text_disp_1" ):
1422	if self.text_disp_1 !=None:
1423	self.text_disp_1.Hide()
1424	except:
1425	dispersty = None
1426	pass
1427	#set the panel when fit result are float not list
1428	if out.__class__== numpy.float64:
1429	self.param_toFit[0][2].SetValue(format_number(out))
1430
1431	if self.param_toFit[0][4].IsShown:
1432	self.param_toFit[0][4].Hide()
1433	if cov !=None :
1434	self.text2_3.Show(True)
1435	try:
1436	if dispersity !=None:
1437	name= dispersity.__name__
1438	if name == "GaussianDispersion" and self.enable_disp.GetValue():
1439	if hasattr(self,"text_disp_1" ):
1440	if self.text_disp_1 !=None:
1441	self.text_disp_1.Show(True)
1442	except:
1443	pass
1444
1445	if cov[0]==None or not numpy.isfinite(cov[0]):
1446	if self.param_toFit[0][3].IsShown:
1447	self.param_toFit[0][3].Hide()
1448	else:
1449	self.param_toFit[0][3].Show(True)
1450	self.param_toFit[0][4].Show(True)
1451	self.param_toFit[0][4].SetValue(format_number(cov[0]))
1452	has_error = True
1453	else:
1454
1455	i = 0
1456	#Set the panel when fit result are list
1457	for item in self.param_toFit:
1458	if len(item)>5 and item != None:
1459	## reset error value to initial state
1460	item[3].Hide()
1461	item[4].Hide()
1462
1463	for ind in range(len(out)):
1464
1465	if item[1] == p_name[ind]:
1466	break
1467	if len(out)<=len(self.param_toFit) and out[ind] !=None:
1468	val_out = format_number(out[ind])
1469	item[2].SetValue(val_out)
1470
1471	if(cov !=None):
1472
1473	try:
1474	if dispersity !=None:
1475	name= dispersity.__name__
1476	if name == "GaussianDispersion" and self.enable_disp.GetValue():
1477	if hasattr(self,"text_disp_1" ):
1478	if self.text_disp_1!=None:
1479	if not self.text_disp_1.IsShown():
1480	self.text_disp_1.Show(True)
1481	except:
1482	pass
1483
1484	if cov[ind]!=None :
1485	if numpy.isfinite(float(cov[ind])):
1486	val_err = format_number(cov[ind])
1487	item[3].Show(True)
1488	item[4].Show(True)
1489	item[4].SetValue(val_err)
1490
1491	has_error = True
1492	i += 1
1493	#Show error title when any errors displayed
1494	if has_error:
1495	if not self.text2_3.IsShown():
1496	self.text2_3.Show(True)
1497
1498	## save current state
1499	self.save_current_state()
1500	#plot model
1501	self._draw_model()
1502	self._lay_out()
1503	#PostStatusEvent
1504	msg = "Fit completed! "
1505	wx.PostEvent(self.manager.parent, StatusEvent(status=msg))
1506
1507	def onPinholeSmear(self, event):
1508	"""
1509	Create a custom pinhole smear object that will change the way residuals
1510	are compute when fitting
1511
1512	:Note: accuracy is given by strings'High','Med', 'Low' FOR 2d,
1513	None for 1D
1514
1515	"""
1516
1517	if self.check_invalid_panel():
1518	return
1519	if self.model ==None:
1520	self.disable_smearer.SetValue(True)
1521	msg="Please select a Model first..."
1522	wx.MessageBox(msg, 'Info')
1523	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1524	"Smear: %s"%msg))
1525	return
1526
1527	# Need update param values
1528	self._update_paramv_on_fit()
1529
1530	# msg default
1531	msg = None
1532	if event != None:
1533	tcrtl= event.GetEventObject()
1534	# event case of radio button
1535	if tcrtl.GetValue()== True:
1536	self.dx_min = 0.0
1537	self.dx_max = 0.0
1538	is_new_pinhole = True
1539	else:
1540	is_new_pinhole = self._is_changed_pinhole()
1541	else:
1542	is_new_pinhole = True
1543	# if any value is changed
1544	if is_new_pinhole:
1545	msg = self._set_pinhole_smear()
1546	# hide all silt sizer
1547	self._hide_all_smear_info()
1548
1549	##Calculate chi2
1550	temp_smearer = self.current_smearer
1551	#self.compute_chisqr(smearer= temp_smearer)
1552
1553	# show relevant slit sizers
1554	self._show_smear_sizer()
1555
1556	self.sizer_set_smearer.Layout()
1557	self.Layout()
1558
1559	if event != None:
1560	event.Skip()
1561	#self._undo.Enable(True)
1562	self.save_current_state()
1563	event = PageInfoEvent(page = self)
1564	wx.PostEvent(self.parent, event)
1565
1566	def _is_changed_pinhole(self):
1567	"""
1568	check if any of pinhole smear is changed
1569
1570	:return: True or False
1571
1572	"""
1573	# get the values
1574	pin_min = self.smear_pinhole_min.GetValue()
1575	pin_max = self.smear_pinhole_max.GetValue()
1576
1577	# Check changes in slit width
1578	try:
1579	dx_min = float(pin_min)
1580	except:
1581	return True
1582	if self.dx_min != dx_min:
1583	return True
1584
1585	# Check changes in slit heigth
1586	try:
1587	dx_max = float(pin_max)
1588	except:
1589	return True
1590	if self.dx_max != dx_max:
1591	return True
1592	return False
1593
1594	def _set_pinhole_smear(self):
1595	"""
1596	Set custom pinhole smear
1597
1598	:return: msg
1599
1600	"""
1601	# copy data
1602	data = copy.deepcopy(self.data)
1603	if self._is_2D():
1604	self.smear_type = 'Pinhole2d'
1605	len_data = len(data.data)
1606	data.dqx_data = numpy.zeros(len_data)
1607	data.dqy_data = numpy.zeros(len_data)
1608	else:
1609	self.smear_type = 'Pinhole'
1610	len_data = len(data.x)
1611	data.dx = numpy.zeros(len_data)
1612	data.dxl = None
1613	data.dxw = None
1614	msg = None
1615
1616	get_pin_min = self.smear_pinhole_min
1617	get_pin_max = self.smear_pinhole_max
1618
1619	if not check_float(get_pin_min):
1620	get_pin_min.SetBackgroundColour("pink")
1621	msg= "Model Error:wrong value entered!!!"
1622	elif not check_float(get_pin_max ):
1623	get_pin_max.SetBackgroundColour("pink")
1624	msg= "Model Error:wrong value entered!!!"
1625	else:
1626	if len_data < 2: len_data = 2
1627	self.dx_min = float(get_pin_min.GetValue())
1628	self.dx_max = float(get_pin_max.GetValue())
1629	if self.dx_min < 0:
1630	get_pin_min.SetBackgroundColour("pink")
1631	msg= "Model Error:This value can not be negative!!!"
1632	elif self.dx_max <0:
1633	get_pin_max.SetBackgroundColour("pink")
1634	msg= "Model Error:This value can not be negative!!!"
1635	elif self.dx_min != None and self.dx_max != None:
1636	if self._is_2D():
1637	data.dqx_data[data.dqx_data==0] = self.dx_min
1638	data.dqy_data[data.dqy_data==0] = self.dx_max
1639	elif self.dx_min == self.dx_max:
1640	data.dx[data.dx==0] = self.dx_min
1641	else:
1642	step = (self.dx_max - self.dx_min)/(len_data-1)
1643	data.dx = numpy.arange(self.dx_min,self.dx_max+step/1.1,step)
1644	elif self.dx_min != None:
1645	if self._is_2D(): data.dqx_data[data.dqx_data==0] = self.dx_min
1646	else: data.dx[data.dx==0] = self.dx_min
1647	elif self.dx_max != None:
1648	if self._is_2D(): data.dqy_data[data.dqy_data==0] = self.dx_max
1649	else: data.dx[data.dx==0] = self.dx_max
1650	self.current_smearer = smear_selection(data)
1651	# 2D need to set accuracy
1652	if self._is_2D():
1653	self.current_smearer.set_accuracy(accuracy = self.smear2d_accuracy)
1654
1655	if msg != None:
1656	wx.PostEvent(self.manager.parent, StatusEvent(status = msg ))
1657	else:
1658	get_pin_min.SetBackgroundColour("white")
1659	get_pin_max.SetBackgroundColour("white")
1660	## set smearing value whether or not the data contain the smearing info
1661	self.manager.set_smearer(smearer=self.current_smearer, qmin= float(self.qmin_x),qmax= float(self.qmax_x))
1662	return msg
1663
1664	def update_pinhole_smear(self):
1665	"""
1666	called by kill_focus on pinhole TextCntrl
1667	to update the changes
1668
1669	:return: False when wrong value was entered
1670
1671	"""
1672	# msg default
1673	msg = None
1674	# check if any value is changed
1675	if self._is_changed_pinhole():
1676	msg = self._set_pinhole_smear()
1677	#self._undo.Enable(True)
1678	self.save_current_state()
1679
1680	if msg != None:
1681	return False
1682	else:
1683	return True
1684
1685	def onSlitSmear(self, event):
1686	"""
1687	Create a custom slit smear object that will change the way residuals
1688	are compute when fitting
1689	"""
1690
1691	if self.check_invalid_panel():
1692	return
1693
1694	if self.model ==None:
1695	self.disable_smearer.SetValue(True)
1696
1697	msg="Please select a Model first..."
1698	wx.MessageBox(msg, 'Info')
1699	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1700	"Smear: %s"%msg))
1701	return
1702
1703	# Need update param values
1704	self._update_paramv_on_fit()
1705
1706	# msg default
1707	msg = None
1708	# for event given
1709	if event != None:
1710	tcrtl= event.GetEventObject()
1711	# event case of radio button
1712	if tcrtl.GetValue():
1713	self.dxl = 0.0
1714	self.dxw = 0.0
1715	is_new_slit = True
1716	else:
1717	is_new_slit = self._is_changed_slit()
1718	else:
1719	is_new_slit = True
1720
1721	# if any value is changed
1722	if is_new_slit:
1723	msg = self._set_slit_smear()
1724
1725	# hide all silt sizer
1726	self._hide_all_smear_info()
1727	##Calculate chi2
1728	#self.compute_chisqr(smearer= self.current_smearer)
1729	# show relevant slit sizers
1730	self._show_smear_sizer()
1731	self.sizer_set_smearer.Layout()
1732	self.Layout()
1733
1734	if event != None:
1735	event.Skip()
1736	#self._undo.Enable(True)
1737	self.save_current_state()
1738	event = PageInfoEvent(page = self)
1739	wx.PostEvent(self.parent, event)
1740	if msg != None:
1741	wx.PostEvent(self.manager.parent, StatusEvent(status = msg))
1742
1743	def _is_changed_slit(self):
1744	"""
1745	check if any of slit lengths is changed
1746
1747	:return: True or False
1748
1749	"""
1750	# get the values
1751	width = self.smear_slit_width.GetValue()
1752	height = self.smear_slit_height.GetValue()
1753
1754	# check and change the box bg color if it was pink but it should be white now
1755	# because this is the case that _set_slit_smear() will not handle
1756	if height.lstrip().rstrip()=="":
1757	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
1758	if width.lstrip().rstrip()=="":
1759	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
1760
1761	# Check changes in slit width
1762	if width == "":
1763	dxw = 0.0
1764	else:
1765	try:
1766	dxw = float(width)
1767	except:
1768	return True
1769	if self.dxw != dxw:
1770	return True
1771
1772	# Check changes in slit heigth
1773	if height == "":
1774	dxl = 0.0
1775	else:
1776	try:
1777	dxl = float(height)
1778	except:
1779	return True
1780	if self.dxl != dxl:
1781	return True
1782
1783	return False
1784
1785	def _set_slit_smear(self):
1786	"""
1787	Set custom slit smear
1788
1789	:return: message to inform the user about the validity
1790	of the values entered for slit smear
1791	"""
1792	if self.data.__class__.__name__ == "Data2D":
1793	return
1794	temp_smearer = None
1795	# make sure once more if it is smearer
1796	data = copy.deepcopy(self.data)
1797	data_len = len(data.x)
1798	data.dx = None
1799	data.dxl = None
1800	data.dxw = None
1801	msg = None
1802
1803	try:
1804	self.dxl = float(self.smear_slit_height.GetValue())
1805	data.dxl = self.dxl* numpy.ones(data_len)
1806	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
1807	except:
1808	data.dxl = numpy.zeros(data_len)
1809	if self.smear_slit_height.GetValue().lstrip().rstrip()!="":
1810	self.smear_slit_height.SetBackgroundColour("pink")
1811	msg = "Wrong value entered... "
1812	else:
1813	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
1814	try:
1815	self.dxw = float(self.smear_slit_width.GetValue())
1816	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
1817	data.dxw = self.dxw* numpy.ones(data_len)
1818	except:
1819	data.dxw = numpy.zeros(data_len)
1820	if self.smear_slit_width.GetValue().lstrip().rstrip()!="":
1821	self.smear_slit_width.SetBackgroundColour("pink")
1822	msg = "Wrong Fit value entered... "
1823	else:
1824	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
1825
1826	self.current_smearer = smear_selection(data)
1827	#temp_smearer = self.current_smearer
1828	## set smearing value whether or not the data contain the smearing info
1829	self.manager.set_smearer(smearer=self.current_smearer, qmin= float(self.qmin_x), qmax= float(self.qmax_x))
1830	return msg
1831
1832	def update_slit_smear(self):
1833	"""
1834	called by kill_focus on pinhole TextCntrl
1835	to update the changes
1836
1837	:return: False when wrong value was entered
1838
1839	"""
1840	# msg default
1841	msg = None
1842	# check if any value is changed
1843	if self._is_changed_slit():
1844	msg = self._set_slit_smear()
1845	#self._undo.Enable(True)
1846	self.save_current_state()
1847
1848	if msg != None:
1849	return False
1850	else:
1851	return True
1852
1853	def onSmear(self, event):
1854	"""
1855	Create a smear object that will change the way residuals
1856	are compute when fitting
1857	"""
1858	if event != None:
1859	event.Skip()
1860	if self.check_invalid_panel():
1861	return
1862	if self.model ==None:
1863	self.disable_smearer.SetValue(True)
1864	msg="Please select a Model first..."
1865	wx.MessageBox(msg, 'Info')
1866	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1867	"Smear: %s"%msg))
1868	return
1869
1870	# Need update param values
1871	self._update_paramv_on_fit()
1872
1873	temp_smearer = None
1874	self._get_smear_info()
1875
1876	#renew smear sizer
1877	if self.smear_type != None:
1878	self.smear_description_smear_type.SetValue(str(self.smear_type))
1879	self.smear_data_left.SetValue(str(self.dq_l))
1880	self.smear_data_right.SetValue(str(self.dq_r))
1881
1882	self._hide_all_smear_info()
1883
1884	data = copy.deepcopy(self.data)
1885	# make sure once more if it is smearer
1886	self.current_smearer = smear_selection(data)
1887
1888	if self.enable_smearer.GetValue():
1889	if hasattr(self.data,"dxl"):
1890
1891	msg= ": Resolution smearing parameters"
1892	if hasattr(self.data,"dxw"):
1893	msg= ": Slit smearing parameters"
1894	if self.smearer ==None:
1895	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1896	"Data contains no smearing information"))
1897	else:
1898	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1899	"Data contains smearing information"))
1900
1901	#self.smear_description_dqdata.Show(True)
1902	self.smear_data_left.Show(True)
1903	self.smear_data_right.Show(True)
1904	temp_smearer= self.current_smearer
1905	elif self.disable_smearer.GetValue():
1906	self.smear_description_none.Show(True)
1907
1908	self._show_smear_sizer()
1909
1910	self.sizer_set_smearer.Layout()
1911	self.Layout()
1912	## set smearing value whether or not the data contain the smearing info
1913	self.manager.set_smearer(smearer=temp_smearer, qmin= float(self.qmin_x),
1914	qmax= float(self.qmax_x))
1915
1916	##Calculate chi2
1917	#self.compute_chisqr(smearer= temp_smearer)
1918
1919	self.state.enable_smearer= self.enable_smearer.GetValue()
1920	self.state.disable_smearer=self.disable_smearer.GetValue()
1921	self.state.pinhole_smearer = self.pinhole_smearer.GetValue()
1922	self.state.slit_smearer = self.slit_smearer.GetValue()
1923
1924	def on_complete_chisqr(self, event):
1925	"""
1926	print result chisqr
1927
1928	:event: activated by fitting/ complete after draw
1929
1930	"""
1931	try:
1932	if event ==None:
1933	output= "-"
1934	else:
1935	output = event.output
1936	self.tcChi.SetValue(str(format_number(output)))
1937
1938	self.state.tcChi = self.tcChi.GetValue()
1939	except:
1940	pass
1941
1942
1943	def select_all_param(self,event):
1944	"""
1945	set to true or false all checkBox given the main checkbox value cb1
1946	"""
1947	self.param_toFit=[]
1948	if self.parameters !=[]:
1949	if self.cb1.GetValue():
1950	for item in self.parameters:
1951	## for data2D select all to fit
1952	if self.data.__class__.__name__=="Data2D":
1953	item[0].SetValue(True)
1954	self.param_toFit.append(item )
1955	else:
1956	## for 1D all parameters except orientation
1957	if not item in self.orientation_params:
1958	item[0].SetValue(True)
1959	self.param_toFit.append(item )
1960	#if len(self.fittable_param)>0:
1961	for item in self.fittable_param:
1962	if self.data.__class__.__name__=="Data2D":
1963	item[0].SetValue(True)
1964	self.param_toFit.append(item )
1965	else:
1966	## for 1D all parameters except orientation
1967	if not item in self.orientation_params_disp:
1968	item[0].SetValue(True)
1969	self.param_toFit.append(item )
1970	else:
1971	for item in self.parameters:
1972	item[0].SetValue(False)
1973	for item in self.fittable_param:
1974	item[0].SetValue(False)
1975	self.param_toFit=[]
1976
1977	self.save_current_state_fit()
1978
1979	if event !=None:
1980	#self._undo.Enable(True)
1981	## post state to fit panel
1982	event = PageInfoEvent(page = self)
1983	wx.PostEvent(self.parent, event)
1984
1985	def select_param(self,event):
1986	"""
1987	Select TextCtrl checked for fitting purpose and stores them
1988	in self.param_toFit=[] list
1989	"""
1990	self.param_toFit=[]
1991	for item in self.parameters:
1992	#Skip t ifhe angle parameters if 1D data
1993	if self.data.__class__.__name__ !="Data2D":
1994	if item in self.orientation_params:
1995	continue
1996	#Select parameters to fit for list of primary parameters
1997	if item[0].GetValue():
1998	if not (item in self.param_toFit):
1999	self.param_toFit.append(item )
2000	else:
2001	#remove parameters from the fitting list
2002	if item in self.param_toFit:
2003	self.param_toFit.remove(item)
2004
2005	#Select parameters to fit for list of fittable parameters with dispersion
2006	for item in self.fittable_param:
2007	#Skip t ifhe angle parameters if 1D data
2008	if self.data.__class__.__name__ !="Data2D":
2009	if item in self.orientation_params:
2010	continue
2011	if item[0].GetValue():
2012	if not (item in self.param_toFit):
2013	self.param_toFit.append(item)
2014	else:
2015	#remove parameters from the fitting list
2016	if item in self.param_toFit:
2017	self.param_toFit.remove(item)
2018
2019	#Calculate num. of angle parameters
2020	if self.data.__class__.__name__ =="Data2D":
2021	len_orient_para = 0
2022	else:
2023	len_orient_para = len(self.orientation_params) #assume even len
2024	#Total num. of angle parameters
2025	if len(self.fittable_param) > 0:
2026	len_orient_para *= 2
2027	#Set the value of checkbox that selected every checkbox or not
2028	if len(self.parameters)+len(self.fittable_param)-len_orient_para ==len(self.param_toFit):
2029	self.cb1.SetValue(True)
2030	else:
2031	self.cb1.SetValue(False)
2032	self.save_current_state_fit()
2033	if event !=None:
2034	#self._undo.Enable(True)
2035	## post state to fit panel
2036	event = PageInfoEvent(page = self)
2037	wx.PostEvent(self.parent, event)
2038
2039	def set_model_param_sizer(self, model):
2040	"""
2041	Build the panel from the model content
2042
2043	:param model: the model selected in combo box for fitting purpose
2044
2045	"""
2046	self.sizer3.Clear(True)
2047	self.parameters = []
2048	self.param_toFit=[]
2049	self.fittable_param=[]
2050	self.fixed_param=[]
2051	self.orientation_params=[]
2052	self.orientation_params_disp=[]
2053
2054	if model ==None:
2055	self.sizer3.Layout()
2056	self.SetScrollbars(20,20,25,65)
2057	return
2058	## the panel is drawn using the current value of the fit engine
2059	if self.engine_type==None and self.manager !=None:
2060	self.engine_type= self.manager._return_engine_type()
2061
2062	box_description= wx.StaticBox(self, -1,str("Model Parameters"))
2063	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
2064	sizer = wx.GridBagSizer(5,5)
2065	## save the current model
2066	self.model = model
2067
2068	keys = self.model.getParamList()
2069	#list of dispersion paramaters
2070	self.disp_list=self.model.getDispParamList()
2071
2072	def custom_compare(a,b):
2073	"""
2074	Custom compare to order, first by alphabets then second by number.
2075	"""
2076	a_last = a[len(a)-1]
2077	b_last = b[len(b)-1]
2078
2079	num_a = None
2080	num_b = None
2081	# check if it contains a int number(<10)
2082	try:
2083	num_a = int(a_last)
2084	except: pass
2085	try:
2086	num_b = int(b_last)
2087	except: pass
2088	# both have a number
2089	if num_a != None and num_b != None:
2090	if num_a > num_b: return 1
2091	elif num_a == num_b:
2092	return cmp(a.lower(), b.lower())
2093	else: return -1
2094	# one of them has a number
2095	elif num_a != None: return 1
2096	elif num_b != None: return -1
2097	# no nuumbers
2098	else: return cmp(a.lower(), b.lower())
2099
2100	keys.sort(custom_compare)
2101
2102	iy = 0
2103	ix = 0
2104	select_text = "Select All"
2105	self.cb1 = wx.CheckBox(self, -1,str(select_text), (10, 10))
2106	wx.EVT_CHECKBOX(self, self.cb1.GetId(), self.select_all_param)
2107	self.cb1.SetToolTipString("To check/uncheck all the boxes below.")
2108	#self.cb1.SetValue(True)
2109
2110	sizer.Add(self.cb1,(iy, ix),(1,1),\
2111	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
2112	ix +=1
2113	self.text2_2 = wx.StaticText(self, -1, 'Values')
2114	sizer.Add(self.text2_2,(iy, ix),(1,1),\
2115	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2116	ix +=2
2117	self.text2_3 = wx.StaticText(self, -1, 'Errors')
2118	sizer.Add(self.text2_3,(iy, ix),(1,1),\
2119	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2120	self.text2_3.Hide()
2121	ix +=1
2122	self.text2_min = wx.StaticText(self, -1, 'Min')
2123	sizer.Add(self.text2_min,(iy, ix),(1,1),\
2124	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2125	self.text2_min.Hide()
2126	ix +=1
2127	self.text2_max = wx.StaticText(self, -1, 'Max')
2128	sizer.Add(self.text2_max,(iy, ix),(1,1),\
2129	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2130	self.text2_max.Hide()
2131	ix += 1
2132	self.text2_4 = wx.StaticText(self, -1, '[Units]')
2133	sizer.Add(self.text2_4,(iy, ix),(1,1),\
2134	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2135	self.text2_4.Hide()
2136	if self.engine_type=="park":
2137	self.text2_max.Show(True)
2138	self.text2_min.Show(True)
2139
2140	for item in keys:
2141	if not item in self.disp_list and not item in self.model.orientation_params:
2142
2143	##prepare a spot to store errors
2144	if not self.model.details.has_key(item):
2145	self.model.details [item] = ["",None,None]
2146
2147	iy += 1
2148	ix = 0
2149	## add parameters name with checkbox for selecting to fit
2150	cb = wx.CheckBox(self, -1, item )
2151	cb.SetToolTipString(" Check for fitting.")
2152	#cb.SetValue(True)
2153	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
2154
2155	sizer.Add( cb,( iy, ix),(1,1),
2156	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
2157
2158	## add parameter value
2159	ix += 1
2160	value= self.model.getParam(item)
2161	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
2162	style=wx.TE_PROCESS_ENTER)
2163	ctl1.SetToolTipString("Hit 'Enter' after typing.")
2164	ctl1.SetValue(format_number(value))
2165	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
2166	## text to show error sign
2167	ix += 1
2168	text2=wx.StaticText(self, -1, '+/-')
2169	sizer.Add(text2,(iy, ix),(1,1),\
2170	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2171	text2.Hide()
2172	ix += 1
2173	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
2174	sizer.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2175	ctl2.Hide()
2176
2177	ix += 1
2178	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
2179	text_enter_callback = self._onparamRangeEnter)
2180
2181	sizer.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2182	ctl3.Hide()
2183
2184	ix += 1
2185	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
2186	text_enter_callback = self._onparamRangeEnter)
2187	sizer.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2188
2189	ctl4.Hide()
2190
2191	if self.engine_type=="park":
2192	ctl3.Show(True)
2193	ctl4.Show(True)
2194	ix +=1
2195	# Units
2196	if self.model.details.has_key(item):
2197	units = wx.StaticText(self, -1, self.model.details[item][0], style=wx.ALIGN_LEFT)
2198	else:
2199	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
2200	sizer.Add(units, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2201
2202	##[cb state, name, value, "+/-", error of fit, min, max , units]
2203	self.parameters.append([cb,item, ctl1,
2204	text2,ctl2, ctl3, ctl4,units])
2205
2206	iy+=1
2207	sizer.Add((10,10),(iy,ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
2208
2209	# type can be either Guassian or Array
2210	if len(self.model.dispersion.values())>0:
2211	type= self.model.dispersion.values()[0]["type"]
2212	else:
2213	type = "Gaussian"
2214
2215	iy += 1
2216	ix = 0
2217	#Add tile for orientational angle
2218	for item in keys:
2219	if item in self.model.orientation_params:
2220	orient_angle = wx.StaticText(self, -1, '[For 2D only]:')
2221	sizer.Add(orient_angle,(iy, ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
2222	if not self.data.__class__.__name__ =="Data2D":
2223	orient_angle.Hide()
2224	else:
2225	orient_angle.Show(True)
2226	break
2227
2228	#For Gaussian only
2229	if type.lower() != "array":
2230	for item in self.model.orientation_params:
2231	if not item in self.disp_list:
2232	##prepare a spot to store min max
2233	if not self.model.details.has_key(item):
2234	self.model.details [item] = ["",None,None]
2235
2236	iy += 1
2237	ix = 0
2238	## add parameters name with checkbox for selecting to fit
2239	cb = wx.CheckBox(self, -1, item )
2240	cb.SetValue(False)
2241	cb.SetToolTipString("Check for fitting")
2242	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
2243	if self.data.__class__.__name__ =="Data2D":
2244	cb.Show(True)
2245	else:
2246	cb.Hide()
2247	sizer.Add( cb,( iy, ix),(1,1),
2248	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
2249
2250	## add parameter value
2251	ix += 1
2252	value= self.model.getParam(item)
2253	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
2254	style=wx.TE_PROCESS_ENTER)
2255	ctl1.SetToolTipString("Hit 'Enter' after typing.")
2256	ctl1.SetValue(format_number(value))
2257	if self.data.__class__.__name__ =="Data2D":
2258	ctl1.Show(True)
2259	else:
2260	ctl1.Hide()
2261	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
2262	## text to show error sign
2263	ix += 1
2264	text2=wx.StaticText(self, -1, '+/-')
2265	sizer.Add(text2,(iy, ix),(1,1),\
2266	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2267	text2.Hide()
2268	ix += 1
2269	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
2270	sizer.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2271	ctl2.Hide()
2272
2273
2274	ix += 1
2275	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
2276	text_enter_callback = self._onparamRangeEnter)
2277
2278	sizer.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2279	ctl3.Hide()
2280
2281	ix += 1
2282	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
2283	text_enter_callback = self._onparamRangeEnter)
2284	sizer.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2285
2286	ctl4.Hide()
2287
2288	if self.engine_type =="park" and self.data.__class__.__name__ =="Data2D":
2289	ctl3.Show(True)
2290	ctl4.Show(True)
2291
2292	ix +=1
2293	# Units
2294	if self.model.details.has_key(item):
2295	units = wx.StaticText(self, -1, self.model.details[item][0], style=wx.ALIGN_LEFT)
2296	else:
2297	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
2298	if self.data.__class__.__name__ =="Data2D":
2299	units.Show(True)
2300
2301	else:
2302	units.Hide()
2303
2304	sizer.Add(units, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2305
2306	##[cb state, name, value, "+/-", error of fit, min, max , units]
2307	self.parameters.append([cb,item, ctl1,
2308	text2,ctl2, ctl3, ctl4,units])
2309	self.orientation_params.append([cb,item, ctl1,
2310	text2,ctl2, ctl3, ctl4,units])
2311
2312	iy+=1
2313
2314	#Display units text on panel
2315	for item in keys:
2316	if self.model.details.has_key(item):
2317	self.text2_4.Show()
2318	#Fill the list of fittable parameters
2319	self.select_all_param(event=None)
2320
2321	self.save_current_state_fit()
2322	boxsizer1.Add(sizer)
2323	self.sizer3.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
2324	self.sizer3.Layout()
2325	self.Layout()
2326	self.Refresh()
2327	self.SetScrollbars(20,20,25,65)
2328
2329
2330	class BGTextCtrl(wx.TextCtrl):
2331	"""
2332	Text control used to display outputs.
2333	No editing allowed. The background is
2334	grayed out. User can't select text.
2335	"""
2336	def __init__(self, args, *kwds):
2337	wx.TextCtrl.__init__(self, args, *kwds)
2338	self.SetEditable(False)
2339	self.SetBackgroundColour(self.GetParent().GetBackgroundColour())
2340
2341	# Bind to mouse event to avoid text highlighting
2342	# The event will be skipped once the call-back
2343	# is called.
2344	self.Bind(wx.EVT_MOUSE_EVENTS, self._click)
2345
2346	def _click(self, event):
2347	"""
2348	Prevent further handling of the mouse event
2349	by not calling Skip().
2350	"""
2351	pass
2352
2353	"""
2354	Example: ::
2355
2356	class HelpWindow(wx.Frame):
2357	def __init__(self, parent, id, title):
2358	wx.Frame.__init__(self, parent, id, title, size=(570, 400))
2359
2360	from sans.models.CylinderModel import CylinderModel
2361	model = CylinderModel()
2362
2363	from danse.common.plottools.plottables import Data1D
2364	data= Data1D(x=[1,2], y=[3,4], dy=[0.1, 0,1])
2365
2366	from fitpanel import PageInfo
2367	myinfo = PageInfo(self, model, data=data )
2368
2369	## add data
2370
2371	from models import ModelList
2372	mylist= ModelList()
2373
2374	from sans.models.SphereModel import SphereModel
2375	from sans.models.SquareWellStructure import SquareWellStructure
2376	from sans.models.DebyeModel import DebyeModel
2377	from sans.models.LineModel import LineModel
2378	name= "shapes"
2379	list1= [SphereModel]
2380	mylist.set_list( name, list1)
2381
2382	name= "Shape-independent"
2383	list1= [DebyeModel]
2384	mylist.set_list( name, list1)
2385
2386	name= "Structure Factors"
2387	list1= [SquareWellStructure]
2388	mylist.set_list( name, list1)
2389
2390	name= "Added models"
2391	list1= [LineModel]
2392	mylist.set_list( name, list1)
2393
2394	myinfo.model_list_box = mylist.get_list()
2395
2396	self.page = FitPage(self, myinfo)
2397
2398	self.Centre()
2399	self.Show(True)
2400
2401	if __name__=="__main__":
2402	app = wx.App()
2403	HelpWindow(None, -1, 'HelpWindow')
2404	app.MainLoop()
2405	"""
2406

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/sansview/perspectives/fitting/fitpage.py @ 6d48919

Download in other formats: