fitpage.py @ 2fc9243

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2release_4.0.1ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 2fc9243 was 64017a8, checked in by Jae Cho <jhjcho@…>, 14 years ago
fixed the bug: Errors on theory panel when changing # of points w/ 2D plot
Property mode set to `100644`
File size: 90.5 KB

Line
1
2
3	import sys
4	import wx
5	import wx.lib.newevent
6	import numpy
7	import copy
8	import math
9	import time
10	from sans.models.dispersion_models import ArrayDispersion, GaussianDispersion
11	from DataLoader.data_info import Data1D
12	from sans.guicomm.events import StatusEvent
13	from sans.guiframe.utils import format_number,check_float
14
15	## event to post model to fit to fitting plugins
16	(ModelEventbox, EVT_MODEL_BOX) = wx.lib.newevent.NewEvent()
17
18	## event to know the selected fit engine
19	(FitterTypeEvent, EVT_FITTER_TYPE) = wx.lib.newevent.NewEvent()
20	(FitStopEvent, EVT_FIT_STOP) = wx.lib.newevent.NewEvent()
21	_BOX_WIDTH = 76
22	_DATA_BOX_WIDTH = 300
23	SMEAR_SIZE_L = 0.005
24	SMEAR_SIZE_H = 0.01
25
26	import basepage
27	from basepage import BasicPage
28	from basepage import PageInfoEvent
29	from DataLoader.qsmearing import smear_selection
30
31	class FitPage(BasicPage):
32	"""
33	FitPanel class contains fields allowing to display results when
34	fitting a model and one data
35	@note: For Fit to be performed the user should check at least one parameter
36	on fit Panel window.
37
38	"""
39
40	def __init__(self,parent, page_info):
41	BasicPage.__init__(self, parent, page_info)
42
43	"""
44	Initialization of the Panel
45	"""
46	## fit page does not content npts txtcrtl
47	self.npts=None
48	## thread for compute Chisqr
49	self.calc_Chisqr=None
50	## default fitengine type
51	self.engine_type = None
52	## smear default
53	self.smearer = None
54	self.current_smearer = None
55	self.dxl = None
56	self.dxw = None
57	self.dx_min = None
58	self.dx_max = None
59
60	## draw sizer
61	self._fill_datainfo_sizer()
62
63	# get smear info from data
64	self._get_smear_info()
65
66	self._fill_model_sizer( self.sizer1)
67
68	self._get_defult_custom_smear()
69
70	self._fill_range_sizer()
71
72	if self.data is None:
73	self.formfactorbox.Disable()
74	self.structurebox.Disable()
75	else:
76	self.smearer = smear_selection( self.data )
77	if self.smearer ==None:
78	self.enable_smearer.Disable()
79	#self.disable_smearer.Disable()
80
81	self.disp_cb_dict = {}
82	## to update the panel according to the fit engine type selected
83	self.Bind(EVT_FITTER_TYPE,self._on_engine_change)
84	self.Bind(EVT_FIT_STOP,self._on_fit_complete)
85
86
87	def _on_fit_complete(self, event):
88	"""
89	When fit is complete ,reset the fit button label.
90	"""
91	#self.btFit.SetLabel("Fit")
92	#self.btFit.Unbind(event=wx.EVT_BUTTON, id=self.btFit.GetId())
93	#self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._onFit,id=self.btFit.GetId())
94	pass
95
96
97	def _on_engine_change(self, event):
98	"""
99	get an event containing the current name of the fit engine type
100	@param event: FitterTypeEvent containing the name of the current engine
101	"""
102	self.engine_type = event.type
103	if len(self.parameters)==0:
104	self.Layout()
105	return
106	if event.type =="park":
107	self.btFit.SetLabel("Fit")
108
109	for item in self.parameters:
110	if event.type =="scipy" :
111	item[5].SetValue("")
112	item[5].Hide()
113	item[6].SetValue("")
114	item[6].Hide()
115	self.text2_min.Hide()
116	self.text2_max.Hide()
117
118	else:
119	item[5].Show(True)
120	item[6].Show(True)
121	self.text2_min.Show(True)
122	self.text2_max.Show(True)
123	for item in self.fittable_param:
124	if item[5]!=None and item[6]!=None and not item in self.orientation_params_disp:
125	if event.type =="scipy" and not item in self.orientation_params:
126	item[5].SetValue("")
127	item[5].Hide()
128	item[6].SetValue("")
129	item[6].Hide()
130	self.text2_min.Hide()
131	self.text2_max.Hide()
132	self.text_disp_min.Hide()
133	self.text_disp_max.Hide()
134	else:
135	item[5].Show(True)
136	item[6].Show(True)
137	self.text2_min.Show(True)
138	self.text2_max.Show(True)
139	self.text_disp_min.Show(True)
140	self.text_disp_max.Show(True)
141
142	for item in self.orientation_params:
143	if item[5]!=None and item[6]!=None:
144	if event.type =="scipy" or self.data.__class__.__name__ !="Data2D":
145	item[5].SetValue("")
146	item[5].Hide()
147	item[6].SetValue("")
148	item[6].Hide()
149	else:
150	item[5].Show(True)
151	item[6].Show(True)
152
153	for item in self.orientation_params_disp:
154	if item[5]!=None and item[6]!=None:
155	if event.type =="scipy" or self.data.__class__.__name__ !="Data2D":
156	item[5].SetValue("")
157	item[5].Hide()
158	item[6].SetValue("")
159	item[6].Hide()
160	else:
161	item[5].Show(True)
162	item[6].Show(True)
163	self.Layout()
164	self.Refresh()
165
166	def _fill_range_sizer(self):
167	"""
168	Fill the sizer containing the plotting range
169	add access to npts
170	"""
171	title = "Fitting"
172	#smear messages & titles
173	smear_message_none = "No smearing is selected..."
174	smear_message_dqdata = "The dQ data is being used for smearing..."
175	smear_message_2d = "No smearing is supported for 2D model fitting..."
176	smear_message_new_ssmear = "Please enter only the value of interest to customize smearing..."
177	smear_message_new_psmear = "Please enter both; the dQ will be generated by interpolation..."
178	smear_message_pinhole_min_title = "dQ_min[1/A]:"
179	smear_message_pinhole_max_title = "dQ_max[1/A]:"
180	smear_message_slit_height_title = "Slit height[1/A]:"
181	smear_message_slit_width_title = "Slit width[1/A]:"
182
183	self._get_smear_info()
184
185	box_description_range = wx.StaticBox(self, -1,str(title))
186	boxsizer_range = wx.StaticBoxSizer(box_description_range, wx.VERTICAL)
187
188	sizer_fit = wx.GridSizer(1, 1,0, 0)
189
190	self.btFit = wx.Button(self,wx.NewId(),'Fit', size=(80,23))
191	self.btFit.Bind(wx.EVT_BUTTON, self._onFit,id= self.btFit.GetId())
192	self.btFit.SetToolTipString("Perform fit.")
193
194
195
196	self.sizer_set_smearer = wx.BoxSizer(wx.VERTICAL)
197	sizer_smearer = wx.BoxSizer(wx.HORIZONTAL)
198	self.sizer_new_smear= wx.BoxSizer(wx.HORIZONTAL)
199	self.sizer_set_masking = wx.BoxSizer(wx.HORIZONTAL)
200	sizer_chi2 = wx.BoxSizer(wx.VERTICAL)
201	smear_set_box= wx.StaticBox(self, -1,'Set Instrumental Smearing')
202	sizer_smearer_box = wx.StaticBoxSizer(smear_set_box, wx.HORIZONTAL)
203	sizer_smearer_box.SetMinSize((_DATA_BOX_WIDTH,85))
204
205	#textcntrl for new resolution
206	self.smear_pinhole_max = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-20,20),style=wx.TE_PROCESS_ENTER,
207	text_enter_callback = self.onPinholeSmear)
208	self.smear_pinhole_min = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-20,20),style=wx.TE_PROCESS_ENTER,
209	text_enter_callback = self.onPinholeSmear)
210	self.smear_slit_height= self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-20,20),style=wx.TE_PROCESS_ENTER,
211	text_enter_callback = self.onSlitSmear)
212	self.smear_slit_width = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-20,20),style=wx.TE_PROCESS_ENTER,
213	text_enter_callback = self.onSlitSmear)
214	self.smear_data_left= BGTextCtrl(self, -1, size=(_BOX_WIDTH-20,20), style=0)
215	self.smear_data_left.SetValue(str(self.dq_l))
216	self.smear_data_right = BGTextCtrl(self, -1, size=(_BOX_WIDTH-20,20), style=0)
217	self.smear_data_right.SetValue(str(self.dq_r))
218
219	#set default values
220	self.smear_pinhole_max.SetValue(str(self.dx_max))
221	self.smear_pinhole_min.SetValue(str(self.dx_min))
222	self.smear_slit_height.SetValue(str(self.dxl))
223	self.smear_slit_width.SetValue(str(self.dxw))
224
225	#Filling the sizer containing instruments smearing info.
226	self.disable_smearer = wx.RadioButton(self, -1, 'None', style=wx.RB_GROUP)
227	self.enable_smearer = wx.RadioButton(self, -1, 'Use dQ Data')
228	#self.enable_smearer.SetToolTipString("Click to use the loaded dQ data for smearing.")
229	self.pinhole_smearer = wx.RadioButton(self, -1, 'Custom Pinhole Smear')
230	#self.pinhole_smearer.SetToolTipString("Click to input custom resolution for pinhole smearing.")
231	self.slit_smearer = wx.RadioButton(self, -1, 'Custom Slit Smear')
232	#self.slit_smearer.SetToolTipString("Click to input custom resolution for slit smearing.")
233	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.disable_smearer.GetId())
234	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.enable_smearer.GetId())
235	self.Bind(wx.EVT_RADIOBUTTON, self.onPinholeSmear, id=self.pinhole_smearer.GetId())
236	self.Bind(wx.EVT_RADIOBUTTON, self.onSlitSmear, id=self.slit_smearer.GetId())
237	self.disable_smearer.SetValue(True)
238
239	# add 4 types of smearing to the sizer
240	sizer_smearer.Add( self.disable_smearer,0, wx.LEFT, 10)
241	sizer_smearer.Add((10,10))
242	sizer_smearer.Add( self.enable_smearer)
243	sizer_smearer.Add((10,10))
244	sizer_smearer.Add( self.pinhole_smearer )
245	sizer_smearer.Add((10,10))
246	sizer_smearer.Add( self.slit_smearer )
247	sizer_smearer.Add((10,10))
248
249	# static box for chi2
250	box_description= wx.StaticBox(self, -1,'Chi2/dof')
251	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
252	boxsizer1.SetMinSize((70,40))
253
254
255
256	# StaticText for chi2 and smear
257	self.tcChi = wx.StaticText(self, -1, "-", style=wx.ALIGN_LEFT)
258	self.smear_description_none = wx.StaticText(self, -1, smear_message_none , style=wx.ALIGN_LEFT)
259	self.smear_description_dqdata = wx.StaticText(self, -1, smear_message_dqdata , style=wx.ALIGN_LEFT)
260	self.smear_description_type = wx.StaticText(self, -1, "Type:" , style=wx.ALIGN_LEFT)
261	self.smear_description_smear_type = BGTextCtrl(self, -1, size=(45,20), style=0)
262	self.smear_description_smear_type.SetValue(str(self.dq_l))
263	self.SetBackgroundColour(self.GetParent().GetBackgroundColour())
264	self.smear_description_2d = wx.StaticText(self, -1, smear_message_2d , style=wx.ALIGN_LEFT)
265	self.smear_message_new_s = wx.StaticText(self, -1, smear_message_new_ssmear , style=wx.ALIGN_LEFT)
266	self.smear_message_new_p = wx.StaticText(self, -1, smear_message_new_psmear , style=wx.ALIGN_LEFT)
267	self.smear_description_pin_min = wx.StaticText(self, -1, smear_message_pinhole_min_title , style=wx.ALIGN_LEFT)
268	self.smear_description_pin_max = wx.StaticText(self, -1, smear_message_pinhole_max_title , style=wx.ALIGN_LEFT)
269	self.smear_description_slit_height = wx.StaticText(self, -1, smear_message_slit_height_title , style=wx.ALIGN_LEFT)
270	self.smear_description_slit_width = wx.StaticText(self, -1, smear_message_slit_width_title , style=wx.ALIGN_LEFT)
271
272	#arrange sizers
273	boxsizer1.Add( self.tcChi )
274	self.sizer_set_smearer.Add(sizer_smearer )
275	self.sizer_set_smearer.Add((10,10))
276	self.sizer_set_smearer.Add( self.smear_description_none,0, wx.CENTER, 10 )
277	self.sizer_set_smearer.Add( self.smear_description_dqdata,0, wx.CENTER, 10 )
278	self.sizer_set_smearer.Add( self.smear_description_2d,0, wx.CENTER, 10 )
279	self.sizer_new_smear.Add( self.smear_description_type,0, wx.CENTER, 10 )
280	self.sizer_new_smear.Add( self.smear_description_smear_type,0, wx.CENTER, 10 )
281	self.sizer_new_smear.Add((15,-1))
282	self.sizer_new_smear.Add( self.smear_description_pin_min,0, wx.CENTER, 10 )
283	self.sizer_new_smear.Add( self.smear_description_slit_height,0, wx.CENTER, 10 )
284	self.sizer_new_smear.Add( self.smear_pinhole_min,0, wx.CENTER, 10 )
285	self.sizer_new_smear.Add( self.smear_slit_height,0, wx.CENTER, 10 )
286	self.sizer_new_smear.Add( self.smear_data_left,0, wx.CENTER, 10 )
287	self.sizer_new_smear.Add((20,-1))
288	self.sizer_new_smear.Add( self.smear_description_pin_max,0, wx.CENTER, 10 )
289	self.sizer_new_smear.Add( self.smear_description_slit_width,0, wx.CENTER, 10 )
290	self.sizer_new_smear.Add( self.smear_pinhole_max,0, wx.CENTER, 10 )
291	self.sizer_new_smear.Add( self.smear_slit_width,0, wx.CENTER, 10 )
292	self.sizer_new_smear.Add( self.smear_data_right,0, wx.CENTER, 10 )
293
294	self.sizer_set_smearer.Add( self.smear_message_new_s,0, wx.CENTER, 10)
295	self.sizer_set_smearer.Add( self.smear_message_new_p,0, wx.CENTER, 10)
296	self.sizer_set_smearer.Add((5,2))
297	self.sizer_set_smearer.Add( self.sizer_new_smear,0, wx.CENTER, 10 )
298
299	# add all to chi2 sizer
300
301	sizer_smearer_box.Add(self.sizer_set_smearer)
302
303	sizer_chi2.Add(sizer_smearer_box)
304	sizer_chi2.Add((-1,5))
305	self.sizer_set_masking.Add((305,-1))
306	#self.sizer_set_masking.Add(boxsizer1,0, wx.RIGHT, 10)
307	sizer_chi2.Add(self.sizer_set_masking )
308
309	sizer_fit.Add(boxsizer1,0, wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 63)
310	#sizer_fit.Add((-1,1),0, wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 1)
311	sizer_fit.Add(self.btFit,0, wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 63)
312	sizer_fit.Layout()
313	#sizer_smearer_box.Add(sizer_chi2)
314	# hide all smear messages and textctrl
315	self._hide_all_smear_info()
316
317	# get smear_selection
318	self.current_smearer= smear_selection( self.data )
319
320	# Show only the relevant smear messages, etc
321	if self.current_smearer == None:
322	if self.data.__class__.__name__ != 'Data2D':
323	self.smear_description_none.Show(True)
324	self.enable_smearer.Disable()
325	else:
326	self.smear_description_2d.Show(True)
327	self.pinhole_smearer.Disable()
328	self.slit_smearer.Disable()
329	self.enable_smearer.Disable()
330	else: self._show_smear_sizer()
331
332
333	#Set sizer for Fitting section
334	self._set_range_sizer( title=title,box_sizer=boxsizer_range, object1=sizer_chi2, object= sizer_fit)
335
336	def _fill_datainfo_sizer(self):
337	"""
338	fill sizer 0 with data info
339	"""
340	## no loaded data , don't fill the sizer
341	if self.data is None:
342	data_min = ""
343	data_max = ""
344	data_name = ""
345	else:
346	data_name = self.data.name
347	#set maximum range for x in linear scale
348	if not hasattr(self.data,"data"): #Display only for 1D data fit
349	# Minimum value of data
350	data_min = min(self.data.x)
351	# Maximum value of data
352	data_max = max(self.data.x)
353	else:
354	## Minimum value of data
355	data_min = 0
356	x = max(math.fabs(self.data.xmin), math.fabs(self.data.xmax))
357	y = max(math.fabs(self.data.ymin), math.fabs(self.data.ymax))
358	## Maximum value of data
359	data_max = math.sqrt(xx + yy)
360
361	box_description= wx.StaticBox(self, -1, 'Data')
362	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
363	#----------------------------------------------------------
364	sizer_data = wx.BoxSizer(wx.HORIZONTAL)
365	#Filling the sizer containing data related fields
366	#self.dataSource = wx.StaticText(self, -1,str(self.data.name))
367	self.dataSource = BGTextCtrl(self, -1)
368	self.dataSource.SetValue(str(data_name))
369	#self.dataSource.SetEditable(False)
370	self.dataSource.SetMinSize((_DATA_BOX_WIDTH, -1))
371	sizer_data.Add(wx.StaticText(self, -1, 'Source Name : '))
372	sizer_data.Add(self.dataSource )
373	sizer_data.Add( (0,5) )
374
375	#---------sizer 2 draw--------------------------------
376	text4_3 = wx.StaticText(self, -1, 'Total Q Range (1/A)',
377	style=wx.ALIGN_LEFT)
378	sizer_range = wx.BoxSizer(wx.HORIZONTAL)
379	sizer_range.Add( text4_3 ,0, wx.RIGHT, 10)
380	self.minimum_q = BGTextCtrl(self, -1, size=(_BOX_WIDTH,20))
381	self.minimum_q.SetValue(str(data_min))
382	#self.minimum_q.SetEditable(False)
383	self.maximum_q = BGTextCtrl(self, -1,size=(_BOX_WIDTH,20))
384	self.maximum_q.SetValue(str(data_max))
385	#self.maximum_q.SetEditable(False)
386	sizer_range.Add(wx.StaticText(self, -1, "Min: "),0, wx.LEFT, 10)
387	sizer_range.Add(self.minimum_q,0, wx.LEFT, 10)
388	sizer_range.Add(wx.StaticText(self, -1, "Max: "),0, wx.LEFT, 10)
389	sizer_range.Add(self.maximum_q,0, wx.LEFT, 10)
390
391	## set q range to plot
392	self.qmin_x = data_min
393	self.qmax_x = data_max
394
395	boxsizer1.Add(sizer_data,0, wx.ALL, 10)
396	boxsizer1.Add(sizer_range, 0 , wx.LEFT, 10)
397	#------------------------------------------------------------
398	self.sizer0.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
399	self.sizer0.Layout()
400
401	def _fill_model_sizer(self, sizer):
402	"""
403	fill sizer containing model info
404	"""
405	##Add model function Details button in fitpanel.
406	##The following 3 lines are for Mac. Let JHC know before modifying...
407	title = "Model"
408	box_description= wx.StaticBox(self, -1,str(title))
409	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
410
411	id = wx.NewId()
412	self.model_help =wx.Button(self,id,'Details', size=(80,23))
413	self.model_help.Bind(wx.EVT_BUTTON, self.on_model_help_clicked,id=id)
414	self.model_help.SetToolTipString("Model Function Help")
415
416	## class base method to add view 2d button
417	self._set_model_sizer(sizer=sizer, box_sizer=boxsizer1, title="Model",object=self.model_help )
418
419
420	def _set_sizer_dispersion(self, dispersity):
421	"""
422	draw sizer with gaussian dispersity parameters
423	"""
424	self.fittable_param=[]
425	self.fixed_param=[]
426	self.orientation_params_disp=[]
427
428	self.sizer4_4.Clear(True)
429	if self.model==None:
430	##no model is selected
431	return
432	if not self.enable_disp.GetValue():
433	## the user didn't select dispersity display
434	return
435
436	self._reset_dispersity()
437
438	# Create the dispersion objects
439	for item in self.model.dispersion.keys():
440	#disp_model = GaussianDispersion()
441	disp_model = dispersity()
442	self._disp_obj_dict[item] = disp_model
443	self.model.set_dispersion(item, disp_model)
444	self.state._disp_obj_dict[item]= disp_model
445
446
447	ix=0
448	iy=1
449	disp = wx.StaticText(self, -1, 'Names')
450	self.sizer4_4.Add(disp,( iy, ix),(1,1),
451	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
452	ix += 1
453	values = wx.StaticText(self, -1, 'Sigmas (STD)')
454	self.sizer4_4.Add(values,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
455	ix +=2
456	self.text_disp_1 = wx.StaticText(self, -1, '')
457	self.sizer4_4.Add( self.text_disp_1,(iy, ix),(1,1),\
458	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
459	self.text_disp_1.Hide()
460
461
462	ix +=1
463	self.text_disp_min = wx.StaticText(self, -1, 'Min')
464	self.sizer4_4.Add(self.text_disp_min,(iy, ix),(1,1),\
465	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
466	self.text_disp_min.Hide()
467	ix +=1
468	self.text_disp_max = wx.StaticText(self, -1, 'Max')
469	self.sizer4_4.Add(self.text_disp_max,(iy, ix),(1,1),\
470	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
471	self.text_disp_max.Hide()
472
473
474	ix += 1
475	npts = wx.StaticText(self, -1, 'Npts')
476	self.sizer4_4.Add(npts,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
477	ix += 1
478	nsigmas = wx.StaticText(self, -1, 'Nsigmas')
479	self.sizer4_4.Add(nsigmas,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
480
481	if self.engine_type=="park":
482	self.text_disp_max.Show(True)
483	self.text_disp_min.Show(True)
484
485	for item in self.model.dispersion.keys():
486	if not item in self.model.orientation_params:
487	if not self.disp_cb_dict.has_key(item):
488	self.disp_cb_dict[item]= None
489	name1=item+".width"
490	name2=item+".npts"
491	name3=item+".nsigmas"
492	if not self.model.details.has_key(name1):
493	self.model.details [name1] = ["",None,None]
494
495	iy += 1
496	for p in self.model.dispersion[item].keys():
497
498	if p=="width":
499	ix = 0
500	cb = wx.CheckBox(self, -1, name1, (10, 10))
501	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
502	self.sizer4_4.Add( cb,( iy, ix),(1,1),
503	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
504	ix = 1
505	value= self.model.getParam(name1)
506	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
507	style=wx.TE_PROCESS_ENTER)
508	ctl1.SetValue(str (format_number(value)))
509	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
510	## text to show error sign
511	ix = 2
512	text2=wx.StaticText(self, -1, '+/-')
513	self.sizer4_4.Add(text2,(iy, ix),(1,1),
514	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
515	text2.Hide()
516
517	ix = 3
518	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
519
520	self.sizer4_4.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
521
522	ctl2.Hide()
523
524	ix = 4
525	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
526	text_enter_callback = self._onparamRangeEnter)
527
528	self.sizer4_4.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
529	ctl3.Hide()
530
531	ix = 5
532	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
533	text_enter_callback = self._onparamRangeEnter)
534	self.sizer4_4.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
535
536	ctl4.Hide()
537
538	if self.engine_type=="park":
539	ctl3.Show(True)
540	ctl4.Show(True)
541
542	self.fittable_param.append([cb,name1,ctl1,text2,
543	ctl2, ctl3, ctl4,None])
544
545	elif p=="npts":
546	ix = 6
547	value= self.model.getParam(name2)
548	Tctl = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
549	style=wx.TE_PROCESS_ENTER)
550
551	Tctl.SetValue(str (format_number(value)))
552	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
553	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
554	self.fixed_param.append([None,name2, Tctl,None,None,
555	None, None,None])
556	elif p=="nsigmas":
557	ix = 7
558	value= self.model.getParam(name3)
559	Tct2 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
560	style=wx.TE_PROCESS_ENTER)
561	Tct2.SetValue(str (format_number(value)))
562	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
563	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
564	ix +=1
565	self.sizer4_4.Add((20,20), (iy,ix),(1,1),
566	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
567
568	self.fixed_param.append([None,name3, Tct2
569	,None,None,None, None,None])
570
571	ix =0
572	iy +=1
573	self.sizer4_4.Add((20,20),(iy,ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
574	for item in self.model.dispersion.keys():
575	if item in self.model.orientation_params:
576	if not self.disp_cb_dict.has_key(item):
577	self.disp_cb_dict[item]= None
578	name1=item+".width"
579	name2=item+".npts"
580	name3=item+".nsigmas"
581	if not self.model.details.has_key(name1):
582	self.model.details [name1] = ["",None,None]
583
584
585	iy += 1
586	for p in self.model.dispersion[item].keys():
587
588	if p=="width":
589	ix = 0
590	cb = wx.CheckBox(self, -1, name1, (10, 10))
591	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
592	self.sizer4_4.Add( cb,( iy, ix),(1,1),
593	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
594	if self.data.__class__.__name__ =="Data2D":
595	cb.Show(True)
596	elif cb.IsShown():
597	cb.Hide()
598	ix = 1
599	value= self.model.getParam(name1)
600	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
601	style=wx.TE_PROCESS_ENTER)
602	ctl1.SetValue(str (format_number(value)))
603	if self.data.__class__.__name__ =="Data2D":
604	ctl1.Show(True)
605	elif ctl1.IsShown():
606	ctl1.Hide()
607	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
608	## text to show error sign
609	ix = 2
610	text2=wx.StaticText(self, -1, '+/-')
611	self.sizer4_4.Add(text2,(iy, ix),(1,1),
612	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
613	text2.Hide()
614
615	ix = 3
616	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
617
618	self.sizer4_4.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
619	ctl2.Hide()
620
621	ix = 4
622	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
623	text_enter_callback = self._onparamRangeEnter)
624
625	self.sizer4_4.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
626
627	ctl3.Hide()
628
629	ix = 5
630	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
631	text_enter_callback = self._onparamRangeEnter)
632	self.sizer4_4.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
633	ctl4.Hide()
634	#if self.data.__class__.__name__ =="Data2D":
635	#ctl4.Enable(True)
636	#elif ctl4.Shown():
637	#ctl4.Hide()
638
639	if self.engine_type=="park" and self.data.__class__.__name__ =="Data2D":
640	ctl3.Show(True)
641	ctl4.Show(True)
642
643
644
645
646	self.fittable_param.append([cb,name1,ctl1,text2,
647	ctl2, ctl3, ctl4,None])
648	self.orientation_params_disp.append([cb,name1,ctl1,text2,
649	ctl2, ctl3, ctl4,None])
650	elif p=="npts":
651	ix = 6
652	value= self.model.getParam(name2)
653	Tctl = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
654	style=wx.TE_PROCESS_ENTER)
655
656	Tctl.SetValue(str (format_number(value)))
657	if self.data.__class__.__name__ =="Data2D":
658	Tctl.Show(True)
659	else:
660	Tctl.Hide()
661	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
662	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
663	self.fixed_param.append([None,name2, Tctl,None,None,
664	None, None,None])
665	self.orientation_params_disp.append([None,name2, Tctl,None,None,
666	None, None,None])
667	elif p=="nsigmas":
668	ix = 7
669	value= self.model.getParam(name3)
670	Tct2 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
671	style=wx.TE_PROCESS_ENTER)
672	Tct2.SetValue(str (format_number(value)))
673	if self.data.__class__.__name__ =="Data2D":
674	Tct2.Show(True)
675	else:
676	Tct2.Hide()
677	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
678	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
679	ix +=1
680
681	self.fixed_param.append([None,name3, Tct2
682	,None,None, None, None,None])
683
684	self.orientation_params_disp.append([None,name3, Tct2
685	,None,None, None, None,None])
686
687
688	self.state.disp_cb_dict = copy.deepcopy(self.disp_cb_dict)
689
690	self.state.model = self.model.clone()
691	## save state into
692	self.state.cb1 = self.cb1.GetValue()
693	self._copy_parameters_state(self.parameters, self.state.parameters)
694	self._copy_parameters_state(self.orientation_params_disp,
695	self.state.orientation_params_disp)
696	self._copy_parameters_state(self.fittable_param, self.state.fittable_param)
697	self._copy_parameters_state(self.fixed_param, self.state.fixed_param)
698
699
700	wx.PostEvent(self.parent, StatusEvent(status=\
701	" Selected Distribution: Gaussian"))
702	#Fill the list of fittable parameters
703	self.select_all_param(event=None)
704
705	self.Layout()
706
707
708	def _onFit(self, event):
709	"""
710	Allow to fit
711	"""
712	#make sure all parameter values are updated.
713	if self.check_invalid_panel():
714	return
715	flag = self._update_paramv_on_fit()
716
717	if not flag:
718	msg= "Fitting range or parameters are invalid"
719	wx.PostEvent(self.parent.parent, StatusEvent(status= msg ))
720	return
721
722	if len(self.param_toFit) <= 0:
723	msg= "Select at least one parameter to fit"
724	wx.PostEvent(self.parent.parent, StatusEvent(status= msg ))
725	return
726
727
728	self.select_param(event =None)
729
730	#Clear errors if exist from previous fitting
731	#self._clear_Err_on_Fit()
732
733	# Remove or do not allow fitting on the Q=0 point, especially when y(q=0)=None at x[0].
734	self.qmin_x = float(self.qmin.GetValue())
735	self.qmax_x = float( self.qmax.GetValue())
736	self.manager._reset_schedule_problem( value=0)
737	self.manager.schedule_for_fit( value=1,page=self,fitproblem =None)
738	self.manager.set_fit_range(page= self,qmin= self.qmin_x, qmax= self.qmax_x)
739
740	#single fit
741	self.manager.onFit()
742	## allow stopping the fit
743	#if self.engine_type=="scipy":
744	# self.btFit.SetLabel("Stop")
745	# self.btFit.Unbind(event=wx.EVT_BUTTON, id= self.btFit.GetId())
746	# self.btFit.Bind(event= wx.EVT_BUTTON, handler=self._StopFit, id=self.btFit.GetId())
747	#else:
748	# self.btFit.SetLabel("Fit")
749	# self.btFit.Bind(event= wx.EVT_BUTTON, handler=self._onFit, id=self.btFit.GetId())
750
751
752
753	def _StopFit(self, event):
754	"""
755	Stop fit
756	"""
757	self.btFit.SetLabel("Fit")
758	if self.engine_type=="scipy":
759	self.manager.stop_fit()
760	self.btFit.Unbind(event=wx.EVT_BUTTON, id=self.btFit.GetId())
761	self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._onFit,id=self.btFit.GetId())
762
763
764	def _on_select_model(self, event):
765	"""
766	call back for model selection
767	"""
768	self._on_select_model_helper()
769	self.set_model_param_sizer(self.model)
770
771	self.enable_disp.SetValue(False)
772	self.disable_disp.SetValue(True)
773	try:
774	self.set_dispers_sizer()
775	except:
776	pass
777	if self.model != None:
778	try:
779	temp_smear= None
780	if self.enable_smearer.GetValue():
781	temp_smear= self.smearer
782	self.compute_chisqr(temp_smear)
783	except:
784	## error occured on chisqr computation
785	pass
786	if self.data is not None and self.data.__class__.__name__ !="Data2D":
787	## set smearing value whether or not the data contain the smearing info
788	self.manager.set_smearer(smearer=temp_smear, qmin= float(self.qmin_x),
789	qmax= float(self.qmax_x))
790
791	evt = ModelEventbox(model=self.model)
792	wx.PostEvent(self.event_owner, evt)
793
794	self.btFit.SetFocus()
795	self.state.enable_disp = self.enable_disp.GetValue()
796	self.state.disable_disp = self.disable_disp.GetValue()
797	self.state.pinhole_smearer = self.pinhole_smearer.GetValue()
798	self.state.slit_smearer = self.slit_smearer.GetValue()
799
800	self.state.structurecombobox = self.structurebox.GetCurrentSelection()
801	self.state.formfactorcombobox = self.formfactorbox.GetCurrentSelection()
802
803
804	if event !=None:
805	#self._undo.Enable(True)
806	## post state to fit panel
807	event = PageInfoEvent(page = self)
808	wx.PostEvent(self.parent, event)
809
810
811	def _onparamEnter(self,event):
812	"""
813	when enter value on panel redraw model according to changed
814	"""
815	flag = False
816	tcrtl= event.GetEventObject()
817
818	#Clear msg if previously shown.
819	msg= ""
820	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
821
822	if check_float(tcrtl):
823	flag = self._onparamEnter_helper()
824	temp_smearer = None
825	if not self.disable_smearer.GetValue():
826	temp_smearer= self.current_smearer
827	## set smearing value whether or not the data contain the smearing info
828	if self.slit_smearer.GetValue():
829	flag1 = self.update_slit_smear()
830	flag = flag or flag1
831	elif self.pinhole_smearer.GetValue():
832	flag1 = self.update_pinhole_smear()
833	flag = flag or flag1
834	elif self.data.__class__.__name__ !="Data2D":
835	self.manager.set_smearer(smearer=temp_smearer, qmin= float(self.qmin_x),
836	qmax= float(self.qmax_x))
837	if flag:
838	self.compute_chisqr(smearer= temp_smearer)
839
840	## new state posted
841	if self.state_change:
842	#self._undo.Enable(True)
843	event = PageInfoEvent(page = self)
844	wx.PostEvent(self.parent, event)
845	self.state_change= False
846	else:
847	self.save_current_state()
848	msg= "Cannot Plot :Must enter a number!!! "
849	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
850
851	self.save_current_state()
852	return
853
854	def _onparamRangeEnter(self, event):
855	"""
856	Check validity of value enter in the parameters range field
857	"""
858	if self.check_invalid_panel():
859	return
860	tcrtl= event.GetEventObject()
861	#Clear msg if previously shown.
862	msg= ""
863	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
864	# Flag to register when a parameter has changed.
865	is_modified = False
866	if tcrtl.GetValue().lstrip().rstrip()!="":
867	try:
868	value = float(tcrtl.GetValue())
869	tcrtl.SetBackgroundColour(wx.WHITE)
870	self._check_value_enter(self.fittable_param ,is_modified)
871	self._check_value_enter(self.parameters ,is_modified)
872	except:
873	tcrtl.SetBackgroundColour("pink")
874	msg= "Model Error:wrong value entered : %s"% sys.exc_value
875	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
876	return
877	else:
878	tcrtl.SetBackgroundColour(wx.WHITE)
879
880	#self._undo.Enable(True)
881	self.save_current_state()
882	event = PageInfoEvent(page = self)
883	wx.PostEvent(self.parent, event)
884	self.state_change= False
885
886
887	def _onQrangeEnter(self, event):
888	"""
889	Check validity of value enter in the Q range field
890	"""
891	if self.check_invalid_panel():
892	return
893	tcrtl= event.GetEventObject()
894	#Clear msg if previously shown.
895	msg= ""
896	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
897	# Flag to register when a parameter has changed.
898	is_modified = False
899	if tcrtl.GetValue().lstrip().rstrip()!="":
900	try:
901	value = float(tcrtl.GetValue())
902	tcrtl.SetBackgroundColour(wx.WHITE)
903
904	# If qmin and qmax have been modified, update qmin and qmax
905	if self._validate_qrange( self.qmin, self.qmax):
906	tempmin = float(self.qmin.GetValue())
907	if tempmin != self.qmin_x:
908	self.qmin_x = tempmin
909	tempmax = float(self.qmax.GetValue())
910	if tempmax != self.qmax_x:
911	self.qmax_x = tempmax
912	else:
913	tcrtl.SetBackgroundColour("pink")
914	msg= "Model Error:wrong value entered : %s"% sys.exc_value
915	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
916	return
917
918	except:
919	tcrtl.SetBackgroundColour("pink")
920	msg= "Model Error:wrong value entered : %s"% sys.exc_value
921	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
922	return
923	#Check if # of points for theory model are valid(>0).
924	if self.npts != None:
925	if check_float(self.npts):
926	temp_npts = float(self.npts.GetValue())
927	if temp_npts != self.num_points:
928	self.num_points = temp_npts
929	is_modified = True
930	else:
931	msg= "Cannot Plot :No npts in that Qrange!!! "
932	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
933
934	else:
935	tcrtl.SetBackgroundColour("pink")
936	msg= "Model Error:wrong value entered!!!"
937	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
938
939	self.compute_chisqr()
940	#self._undo.Enable(True)
941	self.save_current_state()
942	event = PageInfoEvent(page = self)
943	wx.PostEvent(self.parent, event)
944	self.state_change= False
945	self._draw_model()
946
947	def _clear_Err_on_Fit(self):
948	"""
949	hide the error text control shown
950	after fitting
951	"""
952
953	if hasattr(self,"text2_3"):
954	self.text2_3.Hide()
955
956	if len(self.parameters)>0:
957	for item in self.parameters:
958	#Skip t ifhe angle parameters if 1D data
959	if self.data.__class__.__name__ !="Data2D":
960	if item in self.orientation_params:
961	continue
962	if item in self.param_toFit:
963	continue
964	## hide statictext +/-
965	if item[3]!=None and item[3].IsShown():
966	item[3].Hide()
967	## hide textcrtl for error after fit
968	if item[4]!=None and item[4].IsShown():
969	item[4].Hide()
970
971	if len(self.fittable_param)>0:
972	for item in self.fittable_param:
973	#Skip t ifhe angle parameters if 1D data
974	if self.data.__class__.__name__ !="Data2D":
975	if item in self.orientation_params:
976	continue
977	if item in self.param_toFit:
978	continue
979	## hide statictext +/-
980	if item[3]!=None and item[3].IsShown():
981	item[3].Hide()
982	## hide textcrtl for error after fit
983	if item[4]!=None and item[4].IsShown():
984	item[4].Hide()
985	return
986
987	def _get_defult_custom_smear(self):
988	"""
989	Get the defult values for custum smearing.
990	"""
991
992	# get the default values
993	if self.dxl == None: self.dxl = 0.0
994	if self.dxw == None: self.dxw = ""
995	if self.dx_min == None: self.dx_min = SMEAR_SIZE_L
996	if self.dx_max == None: self.dx_max = SMEAR_SIZE_H
997
998	def _get_smear_info(self):
999	"""
1000	Get the smear info from data.
1001	@return: self.smear_type, self.dq_l and self.dq_r,
1002	respectively the type of the smear, dq_min and dq_max for pinhole smear data
1003	while dxl and dxw for slit smear
1004	"""
1005
1006	# default
1007	self.smear_type = None
1008	self.dq_l = None
1009	self.dq_r = None
1010
1011	if self.data is None or\
1012	self.data.__class__.__name__ == 'Data2D':
1013	return
1014
1015	data = self.data
1016
1017	# check if it is pinhole smear and get min max if it is.
1018	if data.dx != None and all(data.dx !=0):
1019	self.smear_type = "Pinhole"
1020	self.dq_l = numpy.min(data.dx)
1021	self.dq_r = numpy.max(data.dx)
1022
1023	# check if it is slit smear and get min max if it is.
1024	elif data.dxl != None or data.dxw != None:
1025	self.smear_type = "Slit"
1026	if data.dxl != None and all(data.dxl !=0):
1027	self.dq_l = data.dxl[0]
1028	if data.dxw != None and all(data.dxw !=0):
1029	self.dq_r = data.dxw[0]
1030
1031	#return self.smear_type,self.dq_l,self.dq_r
1032
1033	def _show_smear_sizer(self):
1034	"""
1035	Show only the sizers depending on smear selection
1036	"""
1037	if self.disable_smearer.GetValue():
1038	self.smear_description_none.Show(True)
1039	elif self.enable_smearer.GetValue():
1040	self.smear_description_dqdata.Show(True)
1041	if self.smear_type != None:
1042	self.smear_description_type.Show(True)
1043	self.smear_description_smear_type.Show(True)
1044	if self.smear_type == 'Slit':
1045	self.smear_description_slit_height.Show(True)
1046	self.smear_description_slit_width.Show(True)
1047	elif self.smear_type == 'Pinhole':
1048	self.smear_description_pin_min.Show(True)
1049	self.smear_description_pin_max.Show(True)
1050	self.smear_data_left.Show(True)
1051	self.smear_data_right.Show(True)
1052	elif self.pinhole_smearer.GetValue():
1053	self.smear_message_new_p.Show(True)
1054	self.smear_description_pin_min.Show(True)
1055	self.smear_pinhole_min.Show(True)
1056	self.smear_description_pin_max.Show(True)
1057	self.smear_pinhole_max.Show(True)
1058	elif self.slit_smearer.GetValue():
1059	self.smear_message_new_s.Show(True)
1060	self.smear_description_slit_height.Show(True)
1061	self.smear_slit_height.Show(True)
1062	self.smear_description_slit_width.Show(True)
1063	self.smear_slit_width.Show(True)
1064
1065	def _hide_all_smear_info(self):
1066	"""
1067	Hide all smearing messages in the set_smearer sizer
1068	"""
1069	self.smear_description_none.Hide()
1070	self.smear_description_dqdata.Hide()
1071	self.smear_description_type.Hide()
1072	self.smear_description_smear_type.Hide()
1073	self.smear_description_2d.Hide()
1074	self.smear_data_left.Hide()
1075	self.smear_data_right.Hide()
1076	self.smear_description_pin_min.Hide()
1077	self.smear_pinhole_min.Hide()
1078	self.smear_description_pin_max.Hide()
1079	self.smear_pinhole_max.Hide()
1080	self.smear_description_slit_height.Hide()
1081	self.smear_slit_height.Hide()
1082	self.smear_description_slit_width.Hide()
1083	self.smear_slit_width.Hide()
1084	self.smear_message_new_p.Hide()
1085	self.smear_message_new_s.Hide()
1086
1087
1088	def set_data(self, data):
1089	"""
1090	reset the current data
1091	"""
1092	self.data = data
1093	if self.data is None:
1094	data_min = ""
1095	data_max = ""
1096	data_name = ""
1097	self.formfactorbox.Disable()
1098	self.structurebox.Disable()
1099	else:
1100	self.smearer = smear_selection( self.data )
1101	self.disable_smearer.SetValue(True)
1102	if self.smearer == None:
1103	self.enable_smearer.Disable()
1104	else:
1105	self.enable_smearer.Enable()
1106
1107	# more disables for 2D
1108	if self.data.__class__.__name__ =="Data2D":
1109	if self.model != None:
1110	self.smear_description_2d.Show(True)
1111	self.smear_description_none.Hide()
1112	self.pinhole_smearer.Disable()
1113	self.slit_smearer.Disable()
1114
1115
1116	self.formfactorbox.Enable()
1117	self.structurebox.Enable()
1118	data_name = self.data.name
1119	#set maximum range for x in linear scale
1120	if not hasattr(self.data,"data"): #Display only for 1D data fit
1121	# Minimum value of data
1122	data_min = min(self.data.x)
1123	# Maximum value of data
1124	data_max = max(self.data.x)
1125	else:
1126	## Minimum value of data
1127	data_min = 0
1128	x = max(math.fabs(self.data.xmin), math.fabs(self.data.xmax))
1129	y = max(math.fabs(self.data.ymin), math.fabs(self.data.ymax))
1130	## Maximum value of data
1131	data_max = math.sqrt(xx + yy)
1132
1133	self.dataSource.SetValue(data_name)
1134	self.qmin_x = data_min
1135	self.qmax_x = data_max
1136	self.minimum_q.SetValue(str(data_min))
1137	self.maximum_q.SetValue(str(data_max))
1138	self.qmin.SetValue(str(data_min))
1139	self.qmax.SetValue(str(data_max))
1140	self.qmin.SetBackgroundColour("white")
1141	self.qmax.SetBackgroundColour("white")
1142	self.state.data = data
1143	self.state.qmin = self.qmin_x
1144	self.state.qmax = self.qmax_x
1145
1146
1147	def reset_page(self, state,first=False):
1148	"""
1149	reset the state
1150	"""
1151	self.reset_page_helper(state)
1152	import sans.guiframe.gui_manager
1153	evt = ModelEventbox(model=state.model)
1154	wx.PostEvent(self.event_owner, evt)
1155
1156	if self.engine_type != None:
1157	self.manager._on_change_engine(engine=self.engine_type)
1158
1159	self.select_param(event = None)
1160	#Save state_fit
1161	self.save_current_state_fit()
1162	self._lay_out()
1163	self.Refresh()
1164
1165	def get_range(self):
1166	"""
1167	return the fitting range
1168	"""
1169	return float(self.qmin_x) , float(self.qmax_x)
1170
1171	def get_npts2fit(self):
1172	"""
1173	return numbers of data points within qrange
1174	Note: This is for Park where chi2 is not normalized by Npts of fit
1175	"""
1176	npts2fit = 0
1177	qmin,qmax = self.get_range()
1178	if self.data.__class__.__name__ =="Data2D":
1179	npts2fit = len(self.data.data[self.mask])
1180	else:
1181	for qx in self.data.x:
1182	if qx >= qmin and qx <= qmax:
1183	npts2fit += 1
1184	return npts2fit
1185
1186
1187	def get_chi2(self):
1188	"""
1189	return the current chi2
1190	"""
1191	return self.tcChi.GetLabel()
1192
1193	def get_param_list(self):
1194	"""
1195	@return self.param_toFit: list containing references to TextCtrl
1196	checked.Theses TextCtrl will allow reference to parameters to fit.
1197	@raise: if return an empty list of parameter fit will nnote work
1198	properly so raise ValueError,"missing parameter to fit"
1199	"""
1200	if self.param_toFit !=[]:
1201	return self.param_toFit
1202	else:
1203	raise ValueError,"missing parameter to fit"
1204
1205	def onsetValues(self,chisqr,p_name, out,cov):
1206	"""
1207	Build the panel from the fit result
1208	@param chisqr:Value of the goodness of fit metric
1209	@p_name: the name of parameters
1210	@param out:list of parameter with the best value found during fitting
1211	@param cov:Covariance matrix
1212
1213	"""
1214	if out == None or not numpy.isfinite(chisqr):
1215	raise ValueError,"Fit error occured..."
1216
1217	is_modified = False
1218	has_error = False
1219
1220	#Hide textctrl boxes of errors.
1221	self._clear_Err_on_Fit()
1222
1223	#Check if chi2 is finite
1224	if chisqr != None or numpy.isfinite(chisqr):
1225	#format chi2
1226	if self.engine_type == "park":
1227	npt_fit = float(self.get_npts2fit())
1228	if npt_fit > 0:
1229	chisqr =chisqr/npt_fit
1230	chi2 = format_number(chisqr)
1231	self.tcChi.SetLabel(chi2)
1232	self.tcChi.Refresh()
1233	else:
1234	self.tcChi.SetLabel("-")
1235
1236	#Hide error title
1237	if self.text2_3.IsShown():
1238	self.text2_3.Hide()
1239
1240	try:
1241	n = self.disp_box.GetCurrentSelection()
1242	dispersity= self.disp_box.GetClientData(n)
1243	if dispersity !=None and self.enable_disp.GetValue():
1244	name= dispersity.__name__
1245	if name == "GaussianDispersion":
1246	if hasattr(self,"text_disp_1" ):
1247	if self.text_disp_1 !=None:
1248	self.text_disp_1.Hide()
1249	except:
1250	dispersty = None
1251	pass
1252	#set the panel when fit result are float not list
1253	if out.__class__== numpy.float64:
1254	self.param_toFit[0][2].SetValue(format_number(out))
1255
1256	if self.param_toFit[0][4].IsShown:
1257	self.param_toFit[0][4].Hide()
1258	if cov !=None :
1259	self.text2_3.Show(True)
1260	try:
1261	if dispersity !=None:
1262	name= dispersity.__name__
1263	if name == "GaussianDispersion" and self.enable_disp.GetValue():
1264	if hasattr(self,"text_disp_1" ):
1265	if self.text_disp_1 !=None:
1266	self.text_disp_1.Show(True)
1267	except:
1268	pass
1269
1270	if cov[0]==None or not numpy.isfinite(cov[0]):
1271	if self.param_toFit[0][3].IsShown:
1272	self.param_toFit[0][3].Hide()
1273	else:
1274	self.param_toFit[0][3].Show(True)
1275	self.param_toFit[0][4].Show(True)
1276	self.param_toFit[0][4].SetValue(format_number(cov[0]))
1277	has_error = True
1278	else:
1279
1280	i = 0
1281	#Set the panel when fit result are list
1282	for item in self.param_toFit:
1283	if len(item)>5 and item != None:
1284	## reset error value to initial state
1285	item[3].Hide()
1286	item[4].Hide()
1287
1288	for ind in range(len(out)):
1289
1290	if item[1] == p_name[ind]:
1291	break
1292	if len(out)<=len(self.param_toFit) and out[ind] !=None:
1293	val_out = format_number(out[ind])
1294	item[2].SetValue(val_out)
1295
1296	if(cov !=None):
1297
1298	try:
1299	if dispersity !=None:
1300	name= dispersity.__name__
1301	if name == "GaussianDispersion" and self.enable_disp.GetValue():
1302	if hasattr(self,"text_disp_1" ):
1303	if self.text_disp_1!=None:
1304	if not self.text_disp_1.IsShown():
1305	self.text_disp_1.Show(True)
1306	except:
1307	pass
1308
1309	if cov[ind]!=None :
1310	if numpy.isfinite(float(cov[ind])):
1311	val_err = format_number(cov[ind])
1312	item[3].Show(True)
1313	item[4].Show(True)
1314	item[4].SetValue(val_err)
1315
1316	has_error = True
1317	i += 1
1318	#Show error title when any errors displayed
1319	if has_error:
1320	if not self.text2_3.IsShown():
1321	self.text2_3.Show(True)
1322
1323	## save current state
1324	self.save_current_state()
1325	#plot model
1326	self._draw_model()
1327	self._lay_out()
1328	#PostStatusEvent
1329	msg = "Fit completed! "
1330	wx.PostEvent(self.manager.parent, StatusEvent(status=msg))
1331
1332	def onPinholeSmear(self, event):
1333	"""
1334	Create a custom pinhole smear object that will change the way residuals
1335	are compute when fitting
1336	"""
1337
1338	if self.check_invalid_panel():
1339	return
1340	if self.model ==None:
1341	msg="Need model and data to smear plot"
1342	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1343	"Smear: %s"%msg))
1344	return
1345
1346	# msg default
1347	msg = None
1348	if event != None:
1349	tcrtl= event.GetEventObject()
1350	# event case of radio button
1351	if tcrtl.GetValue()== True:
1352	self.dx_min = 0.0
1353	self.dx_max = 0.0
1354	is_new_pinhole = True
1355	else:
1356	is_new_pinhole = self._is_changed_pinhole()
1357	else:
1358	is_new_pinhole = self._is_changed_pinhole()
1359	# if any value is changed
1360	if is_new_pinhole:
1361	msg = self._set_pinhole_smear()
1362	# hide all silt sizer
1363	self._hide_all_smear_info()
1364
1365	##Calculate chi2
1366	self.compute_chisqr(smearer= self.current_smearer)
1367	# show relevant slit sizers
1368	self._show_smear_sizer()
1369	self.sizer_set_smearer.Layout()
1370	self.Layout()
1371
1372	if event != None:
1373	event.Skip()
1374	#self._undo.Enable(True)
1375	self.save_current_state()
1376	event = PageInfoEvent(page = self)
1377	wx.PostEvent(self.parent, event)
1378
1379	def _is_changed_pinhole(self):
1380	"""
1381	check if any of pinhole smear is changed
1382	return: True or False
1383	"""
1384	# get the values
1385	pin_min = self.smear_pinhole_min.GetValue()
1386	pin_max = self.smear_pinhole_max.GetValue()
1387
1388	# Check changes in slit width
1389	try:
1390	dx_min = float(pin_min)
1391	except:
1392	return True
1393	if self.dx_min != dx_min:
1394	return True
1395
1396	# Check changes in slit heigth
1397	try:
1398	dx_max = float(pin_max)
1399	except:
1400	return True
1401	if self.dx_max != dx_max:
1402	return True
1403	return False
1404
1405	def _set_pinhole_smear(self):
1406	"""
1407	Set custom pinhole smear
1408	return: msg
1409	"""
1410	# copy data
1411	data = copy.deepcopy(self.data)
1412	data_len = len(data.x)
1413	data.dx = None
1414	data.dxl = None
1415	data.dxw = None
1416	msg = None
1417
1418	# make sure once more if it is smearer
1419	data = copy.deepcopy(self.data)
1420	len_data = len(data.x)
1421	data.dx = numpy.zeros(len_data)
1422	get_pin_min = self.smear_pinhole_min
1423	get_pin_max = self.smear_pinhole_max
1424
1425	if self._validate_qrange(get_pin_min, get_pin_max ):
1426	if len_data < 2: len_data = 2
1427	self.dx_min = float(get_pin_min.GetValue())
1428	self.dx_max = float(get_pin_max.GetValue())
1429	if self.dx_min != None and self.dx_max != None:
1430	if self.dx_min == self.dx_max:
1431	data.dx[data.dx==0] = self.dx_min
1432	else:
1433	step = math.fabs(self.dx_max - self.dx_min)/(len_data-1)
1434	data.dx = numpy.arange(self.dx_min,self.dx_max+step/1.1,step)
1435	elif self.dx_min != None:
1436	data.dx[data.dx==0] = self.dx_min
1437	elif self.dx_max != None:
1438	data.dx[data.dx==0] = self.dx_max
1439	self.current_smearer = smear_selection(data)
1440
1441	else:
1442	get_pin_min.SetBackgroundColour("pink")
1443	get_pin_max.SetBackgroundColour("pink")
1444	msg= "Model Error:wrong value entered!!!"
1445	wx.PostEvent(self.manager.parent, StatusEvent(status = msg ))
1446	## set smearing value whether or not the data contain the smearing info
1447	self.manager.set_smearer(smearer=self.current_smearer, qmin= float(self.qmin_x),qmax= float(self.qmax_x))
1448
1449	return msg
1450
1451	def update_pinhole_smear(self):
1452	"""
1453	called by kill_focus on pinhole TextCntrl
1454	to update the changes
1455	return: msg: False when wrong value was entered
1456	"""
1457	# msg default
1458	msg = None
1459	# check if any value is changed
1460	if self._is_changed_pinhole():
1461	msg = self._set_pinhole_smear()
1462	#self._undo.Enable(True)
1463	self.save_current_state()
1464
1465	if msg != None:
1466	return False
1467	else:
1468	return True
1469
1470	def onSlitSmear(self, event):
1471	"""
1472	Create a custom slit smear object that will change the way residuals
1473	are compute when fitting
1474	"""
1475
1476
1477	if self.check_invalid_panel():
1478	return
1479	if self.model ==None:
1480	msg="Need model and data to smear plot"
1481	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1482	"Smear: %s"%msg))
1483	return
1484	# msg default
1485	msg = None
1486	# for event given
1487	if event != None:
1488	tcrtl= event.GetEventObject()
1489	# event case of radio button
1490	if tcrtl.GetValue():
1491	self.dxl = 0.0
1492	self.dxw = 0.0
1493	is_new_slit = True
1494	else:
1495	is_new_slit = self._is_changed_slit()
1496	else:
1497	is_new_slit = self._is_changed_slit()
1498
1499	# if any value is changed
1500	if is_new_slit:
1501	msg = self._set_slit_smear()
1502	# hide all silt sizer
1503	self._hide_all_smear_info()
1504	##Calculate chi2
1505	self.compute_chisqr(smearer= self.current_smearer)
1506	# show relevant slit sizers
1507	self._show_smear_sizer()
1508	self.sizer_set_smearer.Layout()
1509	self.Layout()
1510
1511	if event != None:
1512	event.Skip()
1513	#self._undo.Enable(True)
1514	self.save_current_state()
1515	event = PageInfoEvent(page = self)
1516	wx.PostEvent(self.parent, event)
1517	if msg != None:
1518	wx.PostEvent(self.manager.parent, StatusEvent(status = msg))
1519
1520
1521	def _is_changed_slit(self):
1522	"""
1523	check if any of slit lengths is changed
1524	return: True or False
1525	"""
1526	# get the values
1527	width = self.smear_slit_width.GetValue()
1528	height = self.smear_slit_height.GetValue()
1529
1530	# check and change the box bg color if it was pink but it should be white now
1531	# because this is the case that _set_slit_smear() will not handle
1532	if height.lstrip().rstrip()=="":
1533	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
1534	if width.lstrip().rstrip()=="":
1535	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
1536
1537	# Check changes in slit width
1538	if width == "":
1539	dxw = 0.0
1540	else:
1541	try:
1542	dxw = float(width)
1543	except:
1544	return True
1545	if self.dxw != dxw:
1546	return True
1547
1548	# Check changes in slit heigth
1549	if height == "":
1550	dxl = 0.0
1551	else:
1552	try:
1553	dxl = float(height)
1554	except:
1555	return True
1556	if self.dxl != dxl:
1557	return True
1558	return False
1559
1560	def _set_slit_smear(self):
1561	"""
1562	Set custom slit smear
1563	return: msg
1564	"""
1565	temp_smearer = None
1566	# make sure once more if it is smearer
1567	data = copy.deepcopy(self.data)
1568	data_len = len(data.x)
1569	data.dx = None
1570	data.dxl = None
1571	data.dxw = None
1572	msg = None
1573
1574	try:
1575	self.dxl = float(self.smear_slit_height.GetValue())
1576	data.dxl = self.dxl* numpy.ones(data_len)
1577	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
1578	except:
1579	data.dxl = numpy.zeros(data_len)
1580	if self.smear_slit_height.GetValue().lstrip().rstrip()!="":
1581	self.smear_slit_height.SetBackgroundColour("pink")
1582	msg = "Wrong value entered... "
1583	else:
1584	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
1585	try:
1586	self.dxw = float(self.smear_slit_width.GetValue())
1587	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
1588	data.dxw = self.dxw* numpy.ones(data_len)
1589	except:
1590	data.dxw = numpy.zeros(data_len)
1591	if self.smear_slit_width.GetValue().lstrip().rstrip()!="":
1592	self.smear_slit_width.SetBackgroundColour("pink")
1593	msg = "Wrong Fit value entered... "
1594	else:
1595	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
1596
1597	self.current_smearer = smear_selection(data)
1598	#temp_smearer = self.current_smearer
1599	## set smearing value whether or not the data contain the smearing info
1600	self.manager.set_smearer(smearer=self.current_smearer, qmin= float(self.qmin_x), qmax= float(self.qmax_x))
1601
1602	return msg
1603
1604
1605	def update_slit_smear(self):
1606	"""
1607	called by kill_focus on pinhole TextCntrl
1608	to update the changes
1609	return: msg: False when wrong value was entered
1610	"""
1611	# msg default
1612	msg = None
1613	# check if any value is changed
1614	if self._is_changed_slit():
1615	msg = self._set_slit_smear()
1616	#self._undo.Enable(True)
1617	self.save_current_state()
1618
1619	if msg != None:
1620	return False
1621	else:
1622	return True
1623
1624
1625	def onSmear(self, event):
1626	"""
1627	Create a smear object that will change the way residuals
1628	are compute when fitting
1629	"""
1630	if self.check_invalid_panel():
1631	return
1632	if self.model ==None:
1633	msg="Need model and data to smear plot"
1634	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1635	"Smear: %s"%msg))
1636	return
1637	temp_smearer = None
1638	self._get_smear_info()
1639
1640	#renew smear sizer
1641	if self.smear_type != None:
1642	self.smear_description_smear_type.SetValue(str(self.smear_type))
1643	self.smear_data_left.SetValue(str(self.dq_l))
1644	self.smear_data_right.SetValue(str(self.dq_r))
1645
1646	self._hide_all_smear_info()
1647
1648	data = copy.deepcopy(self.data)
1649	# make sure once more if it is smearer
1650	self.current_smearer = smear_selection(data)
1651
1652	if self.enable_smearer.GetValue():
1653	temp_smearer= self.current_smearer
1654	if hasattr(self.data,"dxl"):
1655
1656	msg= ": Resolution smearing parameters"
1657	if hasattr(self.data,"dxw"):
1658	msg= ": Slit smearing parameters"
1659	if self.smearer ==None:
1660	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1661	"Data contains no smearing information"))
1662	else:
1663	wx.PostEvent(self.manager.parent, StatusEvent(status=\
1664	"Data contains smearing information %s"%msg))
1665	self.smear_description_dqdata.Show(True)
1666	self.smear_data_left.Show(True)
1667	self.smear_data_right.Show(True)
1668	elif self.disable_smearer.GetValue():
1669	self.smear_description_none.Show(True)
1670
1671	self._show_smear_sizer()
1672	self.sizer_set_smearer.Layout()
1673	self.Layout()
1674	## set smearing value whether or not the data contain the smearing info
1675	self.manager.set_smearer(smearer=temp_smearer, qmin= float(self.qmin_x),
1676	qmax= float(self.qmax_x))
1677	##Calculate chi2
1678	self.compute_chisqr(smearer= temp_smearer)
1679
1680	self.state.enable_smearer= self.enable_smearer.GetValue()
1681	self.state.disable_smearer=self.disable_smearer.GetValue()
1682	self.state.pinhole_smearer = self.pinhole_smearer.GetValue()
1683	self.state.slit_smearer = self.slit_smearer.GetValue()
1684
1685	def complete_chisqr(self, output, elapsed=None):
1686	"""
1687	print result chisqr
1688	"""
1689	try:
1690	if output ==None:
1691	output= "-"
1692
1693	self.tcChi.SetLabel(str(format_number(output)))
1694
1695	self.state.tcChi =self.tcChi
1696
1697	except:
1698	pass
1699
1700
1701	def compute_chisqr1D(self, smearer=None):
1702	"""
1703	Compute chisqr for 1D
1704	"""
1705	try:
1706	self.qmin_x = float(self.qmin.GetValue())
1707	self.qmax_x = float(self.qmax.GetValue())
1708	##return residuals within self.qmin_x and self.qmax_x
1709	from gui_thread import CalcChisqr1D
1710	## If a thread is already started, stop it
1711	if self.calc_Chisqr!= None and self.calc_Chisqr.isrunning():
1712	self.calc_Chisqr.stop()
1713
1714	self.calc_Chisqr= CalcChisqr1D( data1d= self.data,
1715	model= self.model,
1716	smearer=smearer,
1717	qmin=self.qmin_x,
1718	qmax=self.qmax_x,
1719	completefn = self.complete_chisqr,
1720	updatefn = None)
1721
1722	self.calc_Chisqr.queue()
1723
1724	except:
1725	raise ValueError," Could not compute Chisqr for %s Model 2D: "%self.model.name
1726
1727
1728
1729
1730
1731	def compute_chisqr2D(self):
1732	"""
1733	compute chi square given a model and data 2D and set the value
1734	to the tcChi txtcrl
1735	"""
1736	try:
1737	self.qmin_x = float(self.qmin.GetValue())
1738	self.qmax_x = float(self.qmax.GetValue())
1739
1740	##return residuals within self.qmin_x and self.qmax_x
1741	from gui_thread import CalcChisqr2D
1742	## If a thread is already started, stop it
1743	if self.calc_Chisqr!= None and self.calc_Chisqr.isrunning():
1744	self.calc_Chisqr.stop()
1745
1746	self.calc_Chisqr= CalcChisqr2D( data2d= self.data,
1747	model= self.model,
1748	qmin= self.qmin_x,
1749	qmax = self.qmax_x,
1750	completefn = self.complete_chisqr,
1751	updatefn = None)
1752
1753	self.calc_Chisqr.queue()
1754
1755	except:
1756	raise
1757
1758
1759	def compute_chisqr(self , smearer=None):
1760	"""
1761	compute chi square given a model and data 1D and set the value
1762	to the tcChi txtcrl
1763	"""
1764	flag = self._validate_qrange( self.qmin, self.qmax)
1765	if flag== True:
1766	try:
1767	if hasattr(self.data,"data"):
1768	self.compute_chisqr2D()
1769	return
1770	else:
1771	self.compute_chisqr1D(smearer=smearer)
1772	return
1773	except:
1774	wx.PostEvent(self.parent.parent, StatusEvent(status=\
1775	"Chisqr Error: %s"% sys.exc_value))
1776	return
1777
1778
1779	def select_all_param(self,event):
1780	"""
1781	set to true or false all checkBox given the main checkbox value cb1
1782	"""
1783
1784	self.param_toFit=[]
1785	if self.parameters !=[]:
1786	if self.cb1.GetValue():
1787	for item in self.parameters:
1788	## for data2D select all to fit
1789	if self.data.__class__.__name__=="Data2D":
1790	item[0].SetValue(True)
1791	self.param_toFit.append(item )
1792	else:
1793	## for 1D all parameters except orientation
1794	if not item in self.orientation_params:
1795	item[0].SetValue(True)
1796	self.param_toFit.append(item )
1797	#if len(self.fittable_param)>0:
1798	for item in self.fittable_param:
1799	if self.data.__class__.__name__=="Data2D":
1800	item[0].SetValue(True)
1801	self.param_toFit.append(item )
1802	else:
1803	## for 1D all parameters except orientation
1804	if not item in self.orientation_params_disp:
1805	item[0].SetValue(True)
1806	self.param_toFit.append(item )
1807	else:
1808	for item in self.parameters:
1809	item[0].SetValue(False)
1810	for item in self.fittable_param:
1811	item[0].SetValue(False)
1812	self.param_toFit=[]
1813
1814	self.save_current_state_fit()
1815
1816	if event !=None:
1817	#self._undo.Enable(True)
1818	## post state to fit panel
1819	event = PageInfoEvent(page = self)
1820	wx.PostEvent(self.parent, event)
1821
1822
1823
1824	def select_param(self,event):
1825	"""
1826	Select TextCtrl checked for fitting purpose and stores them
1827	in self.param_toFit=[] list
1828	"""
1829	self.param_toFit=[]
1830	for item in self.parameters:
1831	#Skip t ifhe angle parameters if 1D data
1832	if self.data.__class__.__name__ !="Data2D":
1833	if item in self.orientation_params:
1834	continue
1835	#Select parameters to fit for list of primary parameters
1836	if item[0].GetValue():
1837	if not (item in self.param_toFit):
1838	self.param_toFit.append(item )
1839	else:
1840	#remove parameters from the fitting list
1841	if item in self.param_toFit:
1842	self.param_toFit.remove(item)
1843
1844	#Select parameters to fit for list of fittable parameters with dispersion
1845	for item in self.fittable_param:
1846	#Skip t ifhe angle parameters if 1D data
1847	if self.data.__class__.__name__ !="Data2D":
1848	if item in self.orientation_params:
1849	continue
1850	if item[0].GetValue():
1851	if not (item in self.param_toFit):
1852	self.param_toFit.append(item)
1853	else:
1854	#remove parameters from the fitting list
1855	if item in self.param_toFit:
1856	self.param_toFit.remove(item)
1857
1858	#Calculate num. of angle parameters
1859	if self.data.__class__.__name__ =="Data2D":
1860	len_orient_para = 0
1861	else:
1862	len_orient_para = len(self.orientation_params) #assume even len
1863	#Total num. of angle parameters
1864	if len(self.fittable_param) > 0:
1865	len_orient_para *= 2
1866	#Set the value of checkbox that selected every checkbox or not
1867	if len(self.parameters)+len(self.fittable_param)-len_orient_para ==len(self.param_toFit):
1868	self.cb1.SetValue(True)
1869	else:
1870	self.cb1.SetValue(False)
1871	self.save_current_state_fit()
1872	if event !=None:
1873	#self._undo.Enable(True)
1874	## post state to fit panel
1875	event = PageInfoEvent(page = self)
1876	wx.PostEvent(self.parent, event)
1877
1878
1879
1880	def set_model_param_sizer(self, model):
1881	"""
1882	Build the panel from the model content
1883	@param model: the model selected in combo box for fitting purpose
1884	"""
1885	self.sizer3.Clear(True)
1886	self.parameters = []
1887	self.param_toFit=[]
1888	self.fittable_param=[]
1889	self.fixed_param=[]
1890	self.orientation_params=[]
1891	self.orientation_params_disp=[]
1892
1893	if model ==None:
1894	self.sizer3.Layout()
1895	self.SetScrollbars(20,20,25,65)
1896	return
1897	## the panel is drawn using the current value of the fit engine
1898	if self.engine_type==None and self.manager !=None:
1899	self.engine_type= self.manager._return_engine_type()
1900
1901
1902	box_description= wx.StaticBox(self, -1,str("Model Parameters"))
1903	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
1904	sizer = wx.GridBagSizer(5,5)
1905	## save the current model
1906	self.model = model
1907
1908	keys = self.model.getParamList()
1909	#list of dispersion paramaters
1910	self.disp_list=self.model.getDispParamList()
1911
1912	keys.sort()
1913
1914	iy = 0
1915	ix = 0
1916	select_text = "Uncheck all to fix"
1917	self.cb1 = wx.CheckBox(self, -1,str(select_text), (10, 10))
1918	wx.EVT_CHECKBOX(self, self.cb1.GetId(), self.select_all_param)
1919	self.cb1.SetValue(True)
1920
1921	sizer.Add(self.cb1,(iy, ix),(1,1),\
1922	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
1923	ix +=1
1924	self.text2_2 = wx.StaticText(self, -1, 'Values')
1925	sizer.Add(self.text2_2,(iy, ix),(1,1),\
1926	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1927	ix +=2
1928	self.text2_3 = wx.StaticText(self, -1, 'Errors')
1929	sizer.Add(self.text2_3,(iy, ix),(1,1),\
1930	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1931	self.text2_3.Hide()
1932	ix +=1
1933	self.text2_min = wx.StaticText(self, -1, 'Min')
1934	sizer.Add(self.text2_min,(iy, ix),(1,1),\
1935	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1936	self.text2_min.Hide()
1937	ix +=1
1938	self.text2_max = wx.StaticText(self, -1, 'Max')
1939	sizer.Add(self.text2_max,(iy, ix),(1,1),\
1940	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1941	self.text2_max.Hide()
1942	ix += 1
1943	self.text2_4 = wx.StaticText(self, -1, '[Units]')
1944	sizer.Add(self.text2_4,(iy, ix),(1,1),\
1945	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1946	self.text2_4.Hide()
1947	if self.engine_type=="park":
1948	self.text2_max.Show(True)
1949	self.text2_min.Show(True)
1950
1951	for item in keys:
1952	if not item in self.disp_list and not item in self.model.orientation_params:
1953
1954	##prepare a spot to store errors
1955	if not self.model.details.has_key(item):
1956	self.model.details [item] = ["",None,None]
1957
1958	iy += 1
1959	ix = 0
1960	## add parameters name with checkbox for selecting to fit
1961	cb = wx.CheckBox(self, -1, item )
1962	cb.SetValue(True)
1963	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
1964	sizer.Add( cb,( iy, ix),(1,1),
1965	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
1966
1967	## add parameter value
1968	ix += 1
1969	value= self.model.getParam(item)
1970	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
1971	style=wx.TE_PROCESS_ENTER)
1972
1973	ctl1.SetValue(format_number(value))
1974	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
1975	## text to show error sign
1976	ix += 1
1977	text2=wx.StaticText(self, -1, '+/-')
1978	sizer.Add(text2,(iy, ix),(1,1),\
1979	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1980	text2.Hide()
1981	ix += 1
1982	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
1983	sizer.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1984	ctl2.Hide()
1985
1986	ix += 1
1987	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
1988	text_enter_callback = self._onparamRangeEnter)
1989
1990	sizer.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1991	ctl3.Hide()
1992
1993	ix += 1
1994	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
1995	text_enter_callback = self._onparamRangeEnter)
1996	sizer.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
1997
1998	ctl4.Hide()
1999
2000	if self.engine_type=="park":
2001	ctl3.Show(True)
2002	ctl4.Show(True)
2003	ix +=1
2004	# Units
2005	if self.model.details.has_key(item):
2006	units = wx.StaticText(self, -1, self.model.details[item][0], style=wx.ALIGN_LEFT)
2007	else:
2008	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
2009	sizer.Add(units, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2010
2011	##[cb state, name, value, "+/-", error of fit, min, max , units]
2012	self.parameters.append([cb,item, ctl1,
2013	text2,ctl2, ctl3, ctl4,units])
2014
2015	iy+=1
2016	sizer.Add((10,10),(iy,ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
2017
2018	# type can be either Guassian or Array
2019	if len(self.model.dispersion.values())>0:
2020	type= self.model.dispersion.values()[0]["type"]
2021	else:
2022	type = "Gaussian"
2023
2024	iy += 1
2025	ix = 0
2026	#Add tile for orientational angle
2027	for item in keys:
2028	if item in self.model.orientation_params:
2029	orient_angle = wx.StaticText(self, -1, '[For 2D only]:')
2030	sizer.Add(orient_angle,(iy, ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
2031	if not self.data.__class__.__name__ =="Data2D":
2032	orient_angle.Hide()
2033	else:
2034	orient_angle.Show(True)
2035	break
2036
2037	#For Gaussian only
2038	if type.lower() != "array":
2039	for item in self.model.orientation_params:
2040	if not item in self.disp_list:
2041	##prepare a spot to store min max
2042	if not self.model.details.has_key(item):
2043	self.model.details [item] = ["",None,None]
2044
2045	iy += 1
2046	ix = 0
2047	## add parameters name with checkbox for selecting to fit
2048	cb = wx.CheckBox(self, -1, item )
2049	cb.SetValue(False)
2050	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
2051	if self.data.__class__.__name__ =="Data2D":
2052	cb.Show(True)
2053	else:
2054	cb.Hide()
2055	sizer.Add( cb,( iy, ix),(1,1),
2056	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
2057
2058	## add parameter value
2059	ix += 1
2060	value= self.model.getParam(item)
2061	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
2062	style=wx.TE_PROCESS_ENTER)
2063
2064	ctl1.SetValue(format_number(value))
2065	if self.data.__class__.__name__ =="Data2D":
2066	ctl1.Show(True)
2067	else:
2068	ctl1.Hide()
2069	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
2070	## text to show error sign
2071	ix += 1
2072	text2=wx.StaticText(self, -1, '+/-')
2073	sizer.Add(text2,(iy, ix),(1,1),\
2074	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2075	text2.Hide()
2076	ix += 1
2077	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
2078
2079	sizer.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2080	ctl2.Hide()
2081
2082
2083	ix += 1
2084	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
2085	text_enter_callback = self._onparamRangeEnter)
2086
2087	sizer.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2088	ctl3.Hide()
2089
2090	ix += 1
2091	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
2092	text_enter_callback = self._onparamRangeEnter)
2093	sizer.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2094
2095	ctl4.Hide()
2096
2097	if self.engine_type =="park" and self.data.__class__.__name__ =="Data2D":
2098	ctl3.Show(True)
2099	ctl4.Show(True)
2100
2101	ix +=1
2102	# Units
2103	if self.model.details.has_key(item):
2104	units = wx.StaticText(self, -1, self.model.details[item][0], style=wx.ALIGN_LEFT)
2105	else:
2106	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
2107	if self.data.__class__.__name__ =="Data2D":
2108	units.Show(True)
2109
2110	else:
2111	units.Hide()
2112
2113	sizer.Add(units, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
2114
2115	##[cb state, name, value, "+/-", error of fit, min, max , units]
2116	self.parameters.append([cb,item, ctl1,
2117	text2,ctl2, ctl3, ctl4,units])
2118	self.orientation_params.append([cb,item, ctl1,
2119	text2,ctl2, ctl3, ctl4,units])
2120
2121	iy+=1
2122
2123	#Display units text on panel
2124	for item in keys:
2125	if self.model.details.has_key(item):
2126	self.text2_4.Show()
2127	#Fill the list of fittable parameters
2128	self.select_all_param(event=None)
2129
2130	self.save_current_state_fit()
2131	boxsizer1.Add(sizer)
2132	self.sizer3.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
2133	self.sizer3.Layout()
2134	self.Layout()
2135	self.Refresh()
2136	self.SetScrollbars(20,20,25,65)
2137
2138	class BGTextCtrl(wx.TextCtrl):
2139	"""
2140	Text control used to display outputs.
2141	No editing allowed. The background is
2142	grayed out. User can't select text.
2143	"""
2144	def __init__(self, args, *kwds):
2145	wx.TextCtrl.__init__(self, args, *kwds)
2146	self.SetEditable(False)
2147	self.SetBackgroundColour(self.GetParent().GetBackgroundColour())
2148
2149	# Bind to mouse event to avoid text highlighting
2150	# The event will be skipped once the call-back
2151	# is called.
2152	self.Bind(wx.EVT_MOUSE_EVENTS, self._click)
2153
2154	def _click(self, event):
2155	"""
2156	Prevent further handling of the mouse event
2157	by not calling Skip().
2158	"""
2159	pass
2160
2161	class HelpWindow(wx.Frame):
2162	def __init__(self, parent, id, title):
2163	wx.Frame.__init__(self, parent, id, title, size=(570, 400))
2164
2165	from sans.models.CylinderModel import CylinderModel
2166	model = CylinderModel()
2167
2168	from danse.common.plottools.plottables import Data1D
2169	data= Data1D(x=[1,2], y=[3,4], dy=[0.1, 0,1])
2170
2171	from fitpanel import PageInfo
2172	myinfo = PageInfo(self, model, data=data )
2173
2174	## add data
2175
2176	from models import ModelList
2177	mylist= ModelList()
2178
2179	from sans.models.SphereModel import SphereModel
2180	from sans.models.SquareWellStructure import SquareWellStructure
2181	from sans.models.DebyeModel import DebyeModel
2182	from sans.models.LineModel import LineModel
2183	name= "shapes"
2184	list1= [SphereModel]
2185	mylist.set_list( name, list1)
2186
2187	name= "Shape-independent"
2188	list1= [DebyeModel]
2189	mylist.set_list( name, list1)
2190
2191	name= "Structure Factors"
2192	list1= [SquareWellStructure]
2193	mylist.set_list( name, list1)
2194
2195	name= "Added models"
2196	list1= [LineModel]
2197	mylist.set_list( name, list1)
2198
2199	myinfo.model_list_box = mylist.get_list()
2200
2201	self.page = FitPage(self, myinfo)
2202
2203	self.Centre()
2204	self.Show(True)
2205
2206	if __name__=="__main__":
2207	app = wx.App()
2208	HelpWindow(None, -1, 'HelpWindow')
2209	app.MainLoop()
2210

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/sansview/perspectives/fitting/fitpage.py @ 2fc9243

Download in other formats: