fitpage.py @ 716da5e

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2release_4.0.1ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 716da5e was 716da5e, checked in by Jae Cho <jhjcho@…>, 13 years ago
Setfocus on btFit after init page
Property mode set to `100644`
File size: 118.9 KB

Rev	Line
[d1e0473]	1
	2
[c77d859]	3	import sys
	4	import wx
	5	import wx.lib.newevent
	6	import numpy
	7	import copy
	8	import math
[7975f2b]	9	import time
[c77d859]	10	from sans.models.dispersion_models import ArrayDispersion, GaussianDispersion
[7609f1a]	11	from DataLoader.data_info import Data1D
[c4397785]	12	from sans.guiframe.events import StatusEvent
[85b3971]	13	from sans.guiframe.utils import format_number,check_float
[7609f1a]	14
[f72333f]	15	(Chi2UpdateEvent, EVT_CHI2_UPDATE) = wx.lib.newevent.NewEvent()
[eda428b]	16	_BOX_WIDTH = 76
[a5701e6]	17	_DATA_BOX_WIDTH = 300
[ba1f0b2]	18	SMEAR_SIZE_L = 0.00
	19	SMEAR_SIZE_H = 0.00
[7609f1a]	20
[c77d859]	21	import basepage
	22	from basepage import BasicPage
[b787e68c]	23	from basepage import PageInfoEvent
[e4957fb]	24	from sans.models.qsmearing import smear_selection
[c77d859]	25
[e030625]	26
[c77d859]	27	class FitPage(BasicPage):
	28	"""
[5062bbf]	29	FitPanel class contains fields allowing to display results when
	30	fitting a model and one data
	31
	32	:note: For Fit to be performed the user should check at least one parameter
[c77d859]	33	on fit Panel window.
	34	"""
[7975f2b]	35
[6bbeacd4]	36	def __init__(self,parent, color='rand'):
[c77d859]	37	"""
[5062bbf]	38	Initialization of the Panel
[c77d859]	39	"""
[6bbeacd4]	40	BasicPage.__init__(self, parent, color=color)
[e030625]	41
[b787e68c]	42	## draw sizer
[c77d859]	43	self._fill_datainfo_sizer()
[2296316]	44	self.is_2D = None
[7609f1a]	45	# get smear info from data
	46	self._get_smear_info()
[c77d859]	47	self._fill_model_sizer( self.sizer1)
[7609f1a]	48	self._get_defult_custom_smear()
[cfc0913]	49	self._fill_range_sizer()
[6bbeacd4]	50	self._set_smear(self.data)
[f72333f]	51	self.Bind(EVT_CHI2_UPDATE, self.on_complete_chisqr)
[2296316]	52	# bind key event
	53	self.Bind(wx.EVT_RIGHT_DOWN, self.on_right_down)
[982e953]	54	self._set_bookmark_flag(False)
	55	self._set_save_flag(False)
[aad74b3]	56	self._set_preview_flag(False)
[716da5e]	57	self.btFit.SetFocus()
[9466f2d6]	58
	59
[66ff250]	60	def _on_fit_complete(self):
[34a0c17]	61	"""
[5062bbf]	62	When fit is complete ,reset the fit button label.
[34a0c17]	63	"""
[66ff250]	64	self.btFit.SetLabel("Fit")
	65	self.bind_fit_button()
[34a0c17]	66
[f72333f]	67	def _is_2D(self):
	68	"""
[5062bbf]	69	Check if data_name is Data2D
	70
	71	:return: True or False
	72
[f72333f]	73	"""
[ba1f0b2]	74	if self.data.__class__.__name__ == "Data2D" or \
	75	self.enable2D:
[f72333f]	76	return True
	77	return False
	78
[66ff250]	79	def _on_engine_change(self, name):
[77e23a2]	80	"""
[66ff250]	81	get the current name of the fit engine type
	82	and update the panel accordingly
[77e23a2]	83	"""
[66ff250]	84
	85	self.engine_type = str(name)
[0b12abb5]	86	self.state.engine_type = self.engine_type
[66ff250]	87	if len(self.parameters) == 0:
[edd166b]	88	self.Layout()
[77e23a2]	89	return
[6d91073]	90	self.Layout()
[7975f2b]	91	self.Refresh()
[66ff250]	92
[6bbeacd4]	93
	94
[c77d859]	95	def _fill_range_sizer(self):
	96	"""
[5062bbf]	97	Fill the sizer containing the plotting range
	98	add access to npts
[c77d859]	99	"""
[51a71a3]	100	is_2Ddata = False
	101
	102	# Check if data is 2D
[ba1f0b2]	103	if self.data.__class__.__name__ == "Data2D" or \
	104	self.enable2D:
[51a71a3]	105	is_2Ddata = True
	106
[ff8f99b]	107	title = "Fitting"
[7609f1a]	108	#smear messages & titles
	109	smear_message_none = "No smearing is selected..."
	110	smear_message_dqdata = "The dQ data is being used for smearing..."
[f72333f]	111	smear_message_2d = "Higher accuracy is very time-expensive. Use it with care..."
[7609f1a]	112	smear_message_new_ssmear = "Please enter only the value of interest to customize smearing..."
	113	smear_message_new_psmear = "Please enter both; the dQ will be generated by interpolation..."
[2296316]	114	smear_message_2d_x_title = "<dQp>[1/A]:"
	115	smear_message_2d_y_title = "<dQs>[1/A]:"
[f72333f]	116	smear_message_pinhole_min_title = "dQ_low[1/A]:"
	117	smear_message_pinhole_max_title = "dQ_high[1/A]:"
[7609f1a]	118	smear_message_slit_height_title = "Slit height[1/A]:"
	119	smear_message_slit_width_title = "Slit width[1/A]:"
	120
	121	self._get_smear_info()
[c77d859]	122
[51a71a3]	123	#Sizers
	124	box_description_range = wx.StaticBox(self, -1,str(title))
	125	boxsizer_range = wx.StaticBoxSizer(box_description_range, wx.VERTICAL)
[7609f1a]	126	self.sizer_set_smearer = wx.BoxSizer(wx.VERTICAL)
[c77d859]	127	sizer_smearer = wx.BoxSizer(wx.HORIZONTAL)
[7609f1a]	128	self.sizer_new_smear= wx.BoxSizer(wx.HORIZONTAL)
	129	self.sizer_set_masking = wx.BoxSizer(wx.HORIZONTAL)
	130	sizer_chi2 = wx.BoxSizer(wx.VERTICAL)
	131	smear_set_box= wx.StaticBox(self, -1,'Set Instrumental Smearing')
	132	sizer_smearer_box = wx.StaticBoxSizer(smear_set_box, wx.HORIZONTAL)
	133	sizer_smearer_box.SetMinSize((_DATA_BOX_WIDTH,85))
[0cf97c5]	134	sizer_fit = wx.GridSizer(2, 4, 2, 6)
[2012eae]	135
[f72333f]	136	# combobox for smear2d accuracy selection
	137	self.smear_accuracy = wx.ComboBox(self, -1,size=(50,-1),style=wx.CB_READONLY)
	138	self._set_accuracy_list()
	139	self.smear_accuracy.SetValue(self.smear2d_accuracy)
	140	self.smear_accuracy.SetSelection(0)
	141	self.smear_accuracy.SetToolTipString("'Higher' uses more Gaussian points for smearing computation.")
	142
	143	wx.EVT_COMBOBOX(self.smear_accuracy,-1, self._on_select_accuracy)
	144
[2012eae]	145	#Fit button
	146	self.btFit = wx.Button(self,wx.NewId(),'Fit', size=(88,25))
[e030625]	147	self.default_bt_colour = self.btFit.GetDefaultAttributes()
[2012eae]	148	self.btFit.Bind(wx.EVT_BUTTON, self._onFit,id= self.btFit.GetId())
	149	self.btFit.SetToolTipString("Start fitting.")
[7609f1a]	150
[f72333f]	151	#textcntrl for custom resolution
	152	self.smear_pinhole_max = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
[7609f1a]	153	text_enter_callback = self.onPinholeSmear)
[f72333f]	154	self.smear_pinhole_min = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
[7609f1a]	155	text_enter_callback = self.onPinholeSmear)
[f72333f]	156	self.smear_slit_height= self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
[7609f1a]	157	text_enter_callback = self.onSlitSmear)
[f72333f]	158	self.smear_slit_width = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH-25,20),style=wx.TE_PROCESS_ENTER,
[7609f1a]	159	text_enter_callback = self.onSlitSmear)
[f72333f]	160
	161	## smear
	162	self.smear_data_left= BGTextCtrl(self, -1, size=(_BOX_WIDTH-25,20), style=0)
[7609f1a]	163	self.smear_data_left.SetValue(str(self.dq_l))
[f72333f]	164	self.smear_data_right = BGTextCtrl(self, -1, size=(_BOX_WIDTH-25,20), style=0)
[7609f1a]	165	self.smear_data_right.SetValue(str(self.dq_r))
	166
[f72333f]	167	#set default values for smear
[7609f1a]	168	self.smear_pinhole_max.SetValue(str(self.dx_max))
	169	self.smear_pinhole_min.SetValue(str(self.dx_min))
	170	self.smear_slit_height.SetValue(str(self.dxl))
	171	self.smear_slit_width.SetValue(str(self.dxw))
	172
[c77d859]	173	#Filling the sizer containing instruments smearing info.
[7609f1a]	174	self.disable_smearer = wx.RadioButton(self, -1, 'None', style=wx.RB_GROUP)
	175	self.enable_smearer = wx.RadioButton(self, -1, 'Use dQ Data')
	176	#self.enable_smearer.SetToolTipString("Click to use the loaded dQ data for smearing.")
	177	self.pinhole_smearer = wx.RadioButton(self, -1, 'Custom Pinhole Smear')
	178	#self.pinhole_smearer.SetToolTipString("Click to input custom resolution for pinhole smearing.")
	179	self.slit_smearer = wx.RadioButton(self, -1, 'Custom Slit Smear')
	180	#self.slit_smearer.SetToolTipString("Click to input custom resolution for slit smearing.")
[c77d859]	181	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.disable_smearer.GetId())
	182	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.enable_smearer.GetId())
[7609f1a]	183	self.Bind(wx.EVT_RADIOBUTTON, self.onPinholeSmear, id=self.pinhole_smearer.GetId())
	184	self.Bind(wx.EVT_RADIOBUTTON, self.onSlitSmear, id=self.slit_smearer.GetId())
[ff8f99b]	185	self.disable_smearer.SetValue(True)
[c77d859]	186
[7609f1a]	187	# add 4 types of smearing to the sizer
	188	sizer_smearer.Add( self.disable_smearer,0, wx.LEFT, 10)
[c77d859]	189	sizer_smearer.Add((10,10))
[7609f1a]	190	sizer_smearer.Add( self.enable_smearer)
	191	sizer_smearer.Add((10,10))
	192	sizer_smearer.Add( self.pinhole_smearer )
	193	sizer_smearer.Add((10,10))
	194	sizer_smearer.Add( self.slit_smearer )
	195	sizer_smearer.Add((10,10))
	196
[51a71a3]	197	# StaticText for chi2, N(for fitting), Npts
	198	self.tcChi = BGTextCtrl(self, -1, "-", size=(75,20), style=0)
[e9875db]	199	self.tcChi.SetToolTipString("Chi2/Npts(Fit)")
[51a71a3]	200	self.Npts_fit = BGTextCtrl(self, -1, "-", size=(75,20), style=0)
[0cf97c5]	201	self.Npts_fit.SetToolTipString(\
	202	" Npts : number of points selected for fitting")
	203	self.Npts_total = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH, 20),
	204	style=wx.TE_PROCESS_ENTER,
	205	text_enter_callback=self._onQrangeEnter)
	206	self.Npts_total.SetValue(format_number(self.npts_x))
	207	self.Npts_total.SetToolTipString(\
	208	" Total Npts : total number of data points")
	209
[2296316]	210	# Update and Draw button
	211	self.draw_button = wx.Button(self,wx.NewId(),'Compute', size=(88,24))
[0cf97c5]	212	self.draw_button.Bind(wx.EVT_BUTTON, \
	213	self._onDraw,id= self.draw_button.GetId())
[2296316]	214	self.draw_button.SetToolTipString("Compute and Draw.")
	215
[51a71a3]	216	box_description_1= wx.StaticText(self, -1,' Chi2/Npts')
[0cf97c5]	217	box_description_2= wx.StaticText(self, -1,'Npts(Fit)')
	218	box_description_3= wx.StaticText(self, -1,'Total Npts')
	219	box_description_3.SetToolTipString( \
	220	" Total Npts : total number of data points")
[2296316]	221	#box_description_4= wx.StaticText(self, -1,' ')
[7609f1a]	222
[2012eae]	223
[51a71a3]	224	sizer_fit.Add(box_description_1,0,0)
	225	sizer_fit.Add(box_description_2,0,0)
	226	sizer_fit.Add(box_description_3,0,0)
[2296316]	227	sizer_fit.Add(self.draw_button,0,0)
[51a71a3]	228	sizer_fit.Add(self.tcChi,0,0)
	229	sizer_fit.Add(self.Npts_fit ,0,0)
	230	sizer_fit.Add(self.Npts_total,0,0)
	231	sizer_fit.Add(self.btFit,0,0)
	232
	233	# StaticText for smear
	234	#self.tcChi = wx.StaticText(self, -1, "-", style=wx.ALIGN_LEFT)
[7609f1a]	235	self.smear_description_none = wx.StaticText(self, -1, smear_message_none , style=wx.ALIGN_LEFT)
	236	self.smear_description_dqdata = wx.StaticText(self, -1, smear_message_dqdata , style=wx.ALIGN_LEFT)
	237	self.smear_description_type = wx.StaticText(self, -1, "Type:" , style=wx.ALIGN_LEFT)
[f72333f]	238	self.smear_description_accuracy_type = wx.StaticText(self, -1, "Accuracy:" , style=wx.ALIGN_LEFT)
	239	self.smear_description_smear_type = BGTextCtrl(self, -1, size=(57,20), style=0)
[7609f1a]	240	self.smear_description_smear_type.SetValue(str(self.dq_l))
	241	self.SetBackgroundColour(self.GetParent().GetBackgroundColour())
	242	self.smear_description_2d = wx.StaticText(self, -1, smear_message_2d , style=wx.ALIGN_LEFT)
	243	self.smear_message_new_s = wx.StaticText(self, -1, smear_message_new_ssmear , style=wx.ALIGN_LEFT)
	244	self.smear_message_new_p = wx.StaticText(self, -1, smear_message_new_psmear , style=wx.ALIGN_LEFT)
[f72333f]	245	self.smear_description_2d_x = wx.StaticText(self, -1, smear_message_2d_x_title , style=wx.ALIGN_LEFT)
[2296316]	246	self.smear_description_2d_x.SetToolTipString(" dQp(parallel) in q_r direction.")
[f72333f]	247	self.smear_description_2d_y = wx.StaticText(self, -1, smear_message_2d_y_title , style=wx.ALIGN_LEFT)
[2296316]	248	self.smear_description_2d_y.SetToolTipString(" dQs(perpendicular) in q_phi direction.")
[7609f1a]	249	self.smear_description_pin_min = wx.StaticText(self, -1, smear_message_pinhole_min_title , style=wx.ALIGN_LEFT)
	250	self.smear_description_pin_max = wx.StaticText(self, -1, smear_message_pinhole_max_title , style=wx.ALIGN_LEFT)
	251	self.smear_description_slit_height = wx.StaticText(self, -1, smear_message_slit_height_title , style=wx.ALIGN_LEFT)
	252	self.smear_description_slit_width = wx.StaticText(self, -1, smear_message_slit_width_title , style=wx.ALIGN_LEFT)
	253
	254	#arrange sizers
[51a71a3]	255	#boxsizer1.Add( self.tcChi )
[7609f1a]	256	self.sizer_set_smearer.Add(sizer_smearer )
	257	self.sizer_set_smearer.Add((10,10))
	258	self.sizer_set_smearer.Add( self.smear_description_none,0, wx.CENTER, 10 )
	259	self.sizer_set_smearer.Add( self.smear_description_dqdata,0, wx.CENTER, 10 )
	260	self.sizer_set_smearer.Add( self.smear_description_2d,0, wx.CENTER, 10 )
	261	self.sizer_new_smear.Add( self.smear_description_type,0, wx.CENTER, 10 )
[f72333f]	262	self.sizer_new_smear.Add( self.smear_description_accuracy_type,0, wx.CENTER, 10 )
	263	self.sizer_new_smear.Add( self.smear_accuracy )
[7609f1a]	264	self.sizer_new_smear.Add( self.smear_description_smear_type,0, wx.CENTER, 10 )
	265	self.sizer_new_smear.Add((15,-1))
[f72333f]	266	self.sizer_new_smear.Add( self.smear_description_2d_x,0, wx.CENTER, 10 )
[7609f1a]	267	self.sizer_new_smear.Add( self.smear_description_pin_min,0, wx.CENTER, 10 )
	268	self.sizer_new_smear.Add( self.smear_description_slit_height,0, wx.CENTER, 10 )
[f72333f]	269
[7609f1a]	270	self.sizer_new_smear.Add( self.smear_pinhole_min,0, wx.CENTER, 10 )
	271	self.sizer_new_smear.Add( self.smear_slit_height,0, wx.CENTER, 10 )
	272	self.sizer_new_smear.Add( self.smear_data_left,0, wx.CENTER, 10 )
	273	self.sizer_new_smear.Add((20,-1))
[f72333f]	274	self.sizer_new_smear.Add( self.smear_description_2d_y,0, wx.CENTER, 10 )
[7609f1a]	275	self.sizer_new_smear.Add( self.smear_description_pin_max,0, wx.CENTER, 10 )
	276	self.sizer_new_smear.Add( self.smear_description_slit_width,0, wx.CENTER, 10 )
[f72333f]	277
[7609f1a]	278	self.sizer_new_smear.Add( self.smear_pinhole_max,0, wx.CENTER, 10 )
	279	self.sizer_new_smear.Add( self.smear_slit_width,0, wx.CENTER, 10 )
	280	self.sizer_new_smear.Add( self.smear_data_right,0, wx.CENTER, 10 )
	281
	282	self.sizer_set_smearer.Add( self.smear_message_new_s,0, wx.CENTER, 10)
	283	self.sizer_set_smearer.Add( self.smear_message_new_p,0, wx.CENTER, 10)
	284	self.sizer_set_smearer.Add((5,2))
	285	self.sizer_set_smearer.Add( self.sizer_new_smear,0, wx.CENTER, 10 )
	286
[51a71a3]	287	# add all to chi2 sizer
	288	sizer_smearer_box.Add(self.sizer_set_smearer)
[7609f1a]	289	sizer_chi2.Add(sizer_smearer_box)
	290	sizer_chi2.Add((-1,5))
[51a71a3]	291
[7609f1a]	292	# hide all smear messages and textctrl
	293	self._hide_all_smear_info()
	294
	295	# get smear_selection
[f867cd9]	296	self.current_smearer= smear_selection( self.data, self.model )
[83ad478]	297
[7609f1a]	298	# Show only the relevant smear messages, etc
	299	if self.current_smearer == None:
[51a71a3]	300	if not is_2Ddata:
[7609f1a]	301	self.smear_description_none.Show(True)
	302	self.enable_smearer.Disable()
	303	else:
[f72333f]	304	self.smear_description_none.Show(True)
	305	#self.smear_description_2d.Show(True)
	306	#self.pinhole_smearer.Disable()
[7609f1a]	307	self.slit_smearer.Disable()
[f72333f]	308	#self.enable_smearer.Disable()
[0f8f831]	309	if self.data == None:
	310	self.slit_smearer.Disable()
	311	self.pinhole_smearer.Disable()
	312	self.enable_smearer.Disable()
[7609f1a]	313	else: self._show_smear_sizer()
[51a71a3]	314	boxsizer_range.Add(self.sizer_set_masking)
[6bbeacd4]	315	#2D data? default
	316	is_2Ddata = False
[7609f1a]	317
[6bbeacd4]	318	#check if it is 2D data
[ba1f0b2]	319	if self.data.__class__.__name__ == "Data2D" or \
	320	self.enable2D:
[6bbeacd4]	321	is_2Ddata = True
	322
	323	self.sizer5.Clear(True)
	324
[f95301b]	325	self.qmin = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH,20),
[6bbeacd4]	326	style=wx.TE_PROCESS_ENTER,
	327	text_enter_callback = self._onQrangeEnter)
[f95301b]	328	self.qmin.SetValue(str(self.qmin_x))
	329	self.qmin.SetToolTipString("Minimun value of Q in linear scale.")
[6bbeacd4]	330
	331	self.qmax = self.ModelTextCtrl(self, -1,size=(_BOX_WIDTH,20),
	332	style=wx.TE_PROCESS_ENTER,
	333	text_enter_callback=self._onQrangeEnter)
	334	self.qmax.SetValue(str(self.qmax_x))
	335	self.qmax.SetToolTipString("Maximum value of Q in linear scale.")
[0cf97c5]	336	"""
[6bbeacd4]	337	self.theory_npts_tcrtl = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH, 20),
	338	style=wx.TE_PROCESS_ENTER,
	339	text_enter_callback=self._onQrangeEnter)
	340	self.theory_npts_tcrtl.SetValue(format_number(self.npts_x))
	341	self.theory_npts_tcrtl.SetToolTipString("Number of point to plot.")
[0cf97c5]	342	"""
[6bbeacd4]	343	id = wx.NewId()
	344	self.reset_qrange =wx.Button(self,id,'Reset',size=(77,20))
	345
	346	self.reset_qrange.Bind(wx.EVT_BUTTON, self.on_reset_clicked,id=id)
	347	self.reset_qrange.SetToolTipString("Reset Q range to the default values")
	348
	349	sizer_horizontal=wx.BoxSizer(wx.HORIZONTAL)
[0cf97c5]	350	sizer= wx.GridSizer(2, 4, 2, 6)
[6bbeacd4]	351
	352	self.btEditMask = wx.Button(self,wx.NewId(),'Editor', size=(88,23))
	353	self.btEditMask.Bind(wx.EVT_BUTTON, self._onMask,id= self.btEditMask.GetId())
	354	self.btEditMask.SetToolTipString("Edit Mask.")
	355	self.EditMask_title = wx.StaticText(self, -1, ' Masking(2D)')
	356
	357	sizer.Add(wx.StaticText(self, -1, 'Q range'))
	358	sizer.Add(wx.StaticText(self, -1, ' Min[1/A]'))
	359	sizer.Add(wx.StaticText(self, -1, ' Max[1/A]'))
	360	sizer.Add(self.EditMask_title)
[0cf97c5]	361	#sizer.Add(wx.StaticText(self, -1, ''))
[6bbeacd4]	362	sizer.Add(self.reset_qrange)
[f95301b]	363	sizer.Add(self.qmin)
[6bbeacd4]	364	sizer.Add(self.qmax)
[0cf97c5]	365	#sizer.Add(self.theory_npts_tcrtl)
[6bbeacd4]	366	sizer.Add(self.btEditMask)
	367	boxsizer_range.Add(sizer_chi2)
	368	boxsizer_range.Add((10,10))
	369	boxsizer_range.Add(sizer)
	370
	371	boxsizer_range.Add((10,15))
	372	boxsizer_range.Add(sizer_fit)
	373	if is_2Ddata:
	374	self.btEditMask.Enable()
	375	self.EditMask_title.Enable()
	376	else:
	377	self.btEditMask.Disable()
	378	self.EditMask_title.Disable()
	379	## save state
	380	self.save_current_state()
	381	self.sizer5.Add(boxsizer_range,0, wx.EXPAND \| wx.ALL, 10)
	382	self.sizer5.Layout()
	383
[c77d859]	384	def _fill_datainfo_sizer(self):
	385	"""
[5062bbf]	386	fill sizer 0 with data info
[c77d859]	387	"""
	388	## no loaded data , don't fill the sizer
[9237df4]	389	if self.data is None:
	390	data_min = ""
	391	data_max = ""
	392	data_name = ""
	393	else:
	394	data_name = self.data.name
	395	#set maximum range for x in linear scale
	396	if not hasattr(self.data,"data"): #Display only for 1D data fit
	397	# Minimum value of data
	398	data_min = min(self.data.x)
	399	# Maximum value of data
	400	data_max = max(self.data.x)
	401	else:
	402	## Minimum value of data
	403	data_min = 0
	404	x = max(math.fabs(self.data.xmin), math.fabs(self.data.xmax))
	405	y = max(math.fabs(self.data.ymin), math.fabs(self.data.ymax))
	406	## Maximum value of data
	407	data_max = math.sqrt(xx + yy)
[6bbeacd4]	408	## set q range to plot
	409	self.qmin_x = data_min
	410	self.qmax_x = data_max
[fa58441]	411	box_description= wx.StaticBox(self, -1, 'Data')
[c77d859]	412	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
	413	#----------------------------------------------------------
[9237df4]	414	sizer_data = wx.BoxSizer(wx.HORIZONTAL)
[c77d859]	415	#Filling the sizer containing data related fields
[9237df4]	416	#self.dataSource = wx.StaticText(self, -1,str(self.data.name))
[7609f1a]	417	self.dataSource = BGTextCtrl(self, -1)
[9237df4]	418	self.dataSource.SetValue(str(data_name))
[7609f1a]	419	#self.dataSource.SetEditable(False)
[9237df4]	420	self.dataSource.SetMinSize((_DATA_BOX_WIDTH, -1))
[fa58441]	421	sizer_data.Add(wx.StaticText(self, -1, 'Source Name : '))
[9237df4]	422	sizer_data.Add(self.dataSource )
[2a5bba7]	423	sizer_data.Add( (0,5) )
[c77d859]	424
	425	#---------sizer 2 draw--------------------------------
[9237df4]	426	text4_3 = wx.StaticText(self, -1, 'Total Q Range (1/A)',
	427	style=wx.ALIGN_LEFT)
	428	sizer_range = wx.BoxSizer(wx.HORIZONTAL)
	429	sizer_range.Add( text4_3 ,0, wx.RIGHT, 10)
[7609f1a]	430	self.minimum_q = BGTextCtrl(self, -1, size=(_BOX_WIDTH,20))
[9237df4]	431	self.minimum_q.SetValue(str(data_min))
[7609f1a]	432	self.maximum_q = BGTextCtrl(self, -1,size=(_BOX_WIDTH,20))
[9237df4]	433	self.maximum_q.SetValue(str(data_max))
	434	sizer_range.Add(wx.StaticText(self, -1, "Min: "),0, wx.LEFT, 10)
	435	sizer_range.Add(self.minimum_q,0, wx.LEFT, 10)
	436	sizer_range.Add(wx.StaticText(self, -1, "Max: "),0, wx.LEFT, 10)
	437	sizer_range.Add(self.maximum_q,0, wx.LEFT, 10)
	438	boxsizer1.Add(sizer_data,0, wx.ALL, 10)
	439	boxsizer1.Add(sizer_range, 0 , wx.LEFT, 10)
[c77d859]	440	#------------------------------------------------------------
	441	self.sizer0.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
	442	self.sizer0.Layout()
[813334e]	443
[c77d859]	444	def _fill_model_sizer(self, sizer):
	445	"""
[5062bbf]	446	fill sizer containing model info
[c77d859]	447	"""
[7ad6ff5]	448	##Add model function Details button in fitpanel.
[ff8f99b]	449	##The following 3 lines are for Mac. Let JHC know before modifying...
	450	title = "Model"
	451	box_description= wx.StaticBox(self, -1,str(title))
	452	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
	453
[7ad6ff5]	454	id = wx.NewId()
[e3a76c8]	455	self.model_help =wx.Button(self,id,'Details', size=(80,23))
[7ad6ff5]	456	self.model_help.Bind(wx.EVT_BUTTON, self.on_model_help_clicked,id=id)
	457	self.model_help.SetToolTipString("Model Function Help")
[a5701e6]	458	id = wx.NewId()
	459	self.model_view = wx.Button(self, id,"Switch to 2D", size=(80, 23))
	460	self.model_view.Bind(wx.EVT_BUTTON, self._onModel2D, id=id)
	461	hint = "toggle view of model from 1D to 2D or 2D from 1D"
	462	self.model_view.SetToolTipString(hint)
	463
	464	self.shape_rbutton = wx.RadioButton(self, -1, 'Shapes', style=wx.RB_GROUP)
	465	self.shape_indep_rbutton = wx.RadioButton(self, -1, "Shape-Independent")
	466	self.struct_rbutton = wx.RadioButton(self, -1, "Structure Factor ")
	467	self.plugin_rbutton = wx.RadioButton(self, -1, "Customized Models")
	468
	469	self.Bind(wx.EVT_RADIOBUTTON, self._show_combox,
	470	id= self.shape_rbutton.GetId())
	471	self.Bind(wx.EVT_RADIOBUTTON, self._show_combox,
	472	id= self.shape_indep_rbutton.GetId())
	473	self.Bind(wx.EVT_RADIOBUTTON, self._show_combox,
	474	id= self.struct_rbutton.GetId())
	475	self.Bind(wx.EVT_RADIOBUTTON, self._show_combox,
	476	id= self.plugin_rbutton.GetId())
	477	#MAC needs SetValue
	478	self.shape_rbutton.SetValue(True)
	479
	480	sizer_radiobutton = wx.GridSizer(2, 3, 5, 5)
	481	sizer_radiobutton.Add(self.shape_rbutton)
	482	sizer_radiobutton.Add(self.shape_indep_rbutton)
	483	#sizer_radiobutton.Add((5, 5))
	484	sizer_radiobutton.Add(self.model_view,1, wx.LEFT, 20)
	485	sizer_radiobutton.Add(self.plugin_rbutton)
	486	sizer_radiobutton.Add(self.struct_rbutton)
	487	#sizer_radiobutton.Add((5, 5))
	488	sizer_radiobutton.Add(self.model_help,1, wx.LEFT, 20)
	489
	490	sizer_selection = wx.BoxSizer(wx.HORIZONTAL)
	491	mutifactor_selection = wx.BoxSizer(wx.HORIZONTAL)
	492
	493	self.text1 = wx.StaticText(self,-1,"" )
	494	self.text2 = wx.StaticText(self,-1,"P(Q)*S(Q)" )
	495	self.mutifactor_text = wx.StaticText( self,-1,"No. of Shells: ")
	496	self.mutifactor_text1 = wx.StaticText( self,-1,"" )
	497	self.show_sld_button = wx.Button( self,-1,"Show SLD Profile" )
	498	self.show_sld_button.Bind(wx.EVT_BUTTON,self._on_show_sld)
	499
	500	self.formfactorbox = wx.ComboBox(self, -1,style=wx.CB_READONLY)
	501	if self.model!= None:
	502	self.formfactorbox.SetValue(self.model.name)
	503	self.structurebox = wx.ComboBox(self, -1, style=wx.CB_READONLY)
	504	self.multifactorbox = wx.ComboBox(self, -1, style=wx.CB_READONLY)
	505	self.initialize_combox()
	506	wx.EVT_COMBOBOX(self.formfactorbox, -1, self._on_select_model)
[9466f2d6]	507
[a5701e6]	508	wx.EVT_COMBOBOX(self.structurebox, -1, self._on_select_model)
	509	wx.EVT_COMBOBOX(self.multifactorbox, -1, self._on_select_model)
	510	## check model type to show sizer
	511	if self.model !=None:
	512	self._set_model_sizer_selection(self.model)
	513
	514	sizer_selection.Add(self.text1)
	515	sizer_selection.Add((5, 5))
	516	sizer_selection.Add(self.formfactorbox)
	517	sizer_selection.Add((5, 5))
	518	sizer_selection.Add(self.text2)
	519	sizer_selection.Add((5, 5))
	520	sizer_selection.Add(self.structurebox)
	521
	522	mutifactor_selection.Add((10,5))
	523	mutifactor_selection.Add(self.mutifactor_text)
	524	mutifactor_selection.Add(self.multifactorbox)
	525	mutifactor_selection.Add((5, 5))
	526	mutifactor_selection.Add(self.mutifactor_text1)
	527	mutifactor_selection.Add((10, 5))
	528	mutifactor_selection.Add(self.show_sld_button)
	529
	530
	531	boxsizer1.Add(sizer_radiobutton)
	532	boxsizer1.Add((10, 10))
	533	boxsizer1.Add(sizer_selection)
	534	boxsizer1.Add((10, 10))
	535	boxsizer1.Add(mutifactor_selection)
	536
	537	self._set_multfactor_combobox()
	538	self.multifactorbox.SetSelection(1)
	539	self.show_sld_button.Hide()
	540	sizer.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
	541	sizer.Layout()
[5062bbf]	542
[2296316]	543	def _set_sizer_dispersion(self):
[c77d859]	544	"""
[5062bbf]	545	draw sizer with gaussian dispersity parameters
[c77d859]	546	"""
	547	self.fittable_param=[]
	548	self.fixed_param=[]
[60132ef]	549	self.orientation_params_disp=[]
[920a6e5]	550
[c77d859]	551	self.sizer4_4.Clear(True)
	552	if self.model==None:
	553	##no model is selected
	554	return
	555	if not self.enable_disp.GetValue():
	556	## the user didn't select dispersity display
	557	return
[b421b1a]	558
[376916c]	559	self._reset_dispersity()
[b421b1a]	560
[2296316]	561	## fill a sizer with the combobox to select dispersion type
	562	#sizer_select_dispers = wx.BoxSizer(wx.HORIZONTAL)
	563	model_disp = wx.StaticText(self, -1, 'Function')
	564
	565	import sans.models.dispersion_models
	566	self.polydisp= sans.models.dispersion_models.models
[b421b1a]	567
[2296316]	568	ix = 0
	569	iy = 0
[52efcc5]	570	disp = wx.StaticText(self, -1, ' ')
[c77d859]	571	self.sizer4_4.Add(disp,( iy, ix),(1,1),
	572	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
	573	ix += 1
[2296316]	574	values = wx.StaticText(self, -1, 'PD[ratio]')
[01b6bd0]	575	polytext = "Polydispersity (= STD/mean); "
	576	polytext += "the standard deviation over the mean value."
	577	values.SetToolTipString(polytext)
[d7b7156]	578
	579	self.sizer4_4.Add(values,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE,
	580	0)
[c77d859]	581	ix +=2
[920a6e5]	582	self.text_disp_1 = wx.StaticText(self, -1, '')
[c77d859]	583	self.sizer4_4.Add( self.text_disp_1,(iy, ix),(1,1),\
	584	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[920a6e5]	585
	586
	587	ix +=1
	588	self.text_disp_min = wx.StaticText(self, -1, 'Min')
	589	self.sizer4_4.Add(self.text_disp_min,(iy, ix),(1,1),\
	590	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[2296316]	591
[920a6e5]	592	ix +=1
	593	self.text_disp_max = wx.StaticText(self, -1, 'Max')
	594	self.sizer4_4.Add(self.text_disp_max,(iy, ix),(1,1),\
	595	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[339b563]	596
[c77d859]	597	ix += 1
	598	npts = wx.StaticText(self, -1, 'Npts')
[d7b7156]	599	npts.SetToolTipString("Number of sampling points for the numerical\n\
	600	integration over the distribution function.")
[c77d859]	601	self.sizer4_4.Add(npts,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	602	ix += 1
[2296316]	603	nsigmas = wx.StaticText(self, -1, 'Nsigs')
[d7b7156]	604	nsigmas.SetToolTipString(" Number of sigmas between which the range\n\
	605	of the distribution function will be used for weighting. \n\
	606	The value '3' covers 99.5% for Gaussian distribution \n\
[01b6bd0]	607	function. Note: Not recommended to change this value.")
[d7b7156]	608	self.sizer4_4.Add(nsigmas,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE,
	609	0)
[2296316]	610	ix +=1
	611	self.sizer4_4.Add(model_disp,(iy, ix),(1,1),\
	612	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[920a6e5]	613
	614	if self.engine_type=="park":
	615	self.text_disp_max.Show(True)
	616	self.text_disp_min.Show(True)
[6dc9ad8]	617
[c77d859]	618	for item in self.model.dispersion.keys():
[780d095]	619	if not item in self.model.orientation_params:
[edd166b]	620	if not self.disp_cb_dict.has_key(item):
	621	self.disp_cb_dict[item]= None
[d7b7156]	622	name0="Distribution of " + item
[780d095]	623	name1=item+".width"
	624	name2=item+".npts"
	625	name3=item+".nsigmas"
[c99a6c5]	626	if not self.model.details.has_key(name1):
[b421b1a]	627	self.model.details [name1] = ["",None,None]
[c99a6c5]	628
[780d095]	629	iy += 1
	630	for p in self.model.dispersion[item].keys():
	631
	632	if p=="width":
	633	ix = 0
[d7b7156]	634	cb = wx.CheckBox(self, -1, name0, (10, 10))
[2296316]	635	cb.SetToolTipString("Check mark to fit")
[780d095]	636	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
	637	self.sizer4_4.Add( cb,( iy, ix),(1,1),
[d7b7156]	638	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE,
[2296316]	639	5)
[780d095]	640	ix = 1
	641	value= self.model.getParam(name1)
[2296316]	642	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/1.3,20)
[d7b7156]	643	,style=wx.TE_PROCESS_ENTER)
[01b6bd0]	644	ctl1.SetLabel('PD[ratio]')
	645	poly_text = "Polydispersity (STD/mean) of %s\n" % item
	646	poly_text += "STD: the standard deviation"
	647	poly_text += " from the mean value."
	648	ctl1.SetToolTipString(poly_text)
[2296316]	649	ctl1.SetValue(str (format_number(value, True)))
[780d095]	650	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
	651	## text to show error sign
	652	ix = 2
	653	text2=wx.StaticText(self, -1, '+/-')
	654	self.sizer4_4.Add(text2,(iy, ix),(1,1),
	655	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	656	text2.Hide()
[b421b1a]	657
[780d095]	658	ix = 3
[2296316]	659	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH/1.3,20),
[d7b7156]	660	style=0)
[eacf1d66]	661
[d7b7156]	662	self.sizer4_4.Add(ctl2, (iy,ix),(1,1),
	663	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[eacf1d66]	664
[b421b1a]	665	ctl2.Hide()
[eacf1d66]	666
[920a6e5]	667	ix = 4
[d7b7156]	668	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,
	669	20), style=wx.TE_PROCESS_ENTER,
	670	text_enter_callback = self._onparamRangeEnter)
[b9405cd]	671
[d7b7156]	672	self.sizer4_4.Add(ctl3, (iy,ix),(1,1),
	673	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[2296316]	674
[920a6e5]	675
	676	ix = 5
[d7b7156]	677	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,
	678	20), style=wx.TE_PROCESS_ENTER,
	679	text_enter_callback = self._onparamRangeEnter)
[b9405cd]	680
[d7b7156]	681	self.sizer4_4.Add(ctl4, (iy,ix),(1,1),
	682	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[eacf1d66]	683
[920a6e5]	684
	685	if self.engine_type=="park":
	686	ctl3.Show(True)
	687	ctl4.Show(True)
[2296316]	688
[780d095]	689	elif p=="npts":
[920a6e5]	690	ix = 6
[780d095]	691	value= self.model.getParam(name2)
[d7b7156]	692	Tctl = self.ModelTextCtrl(self, -1,
[2296316]	693	size=(_BOX_WIDTH/2.2,20),
[780d095]	694	style=wx.TE_PROCESS_ENTER)
[1a94c36]	695
[780d095]	696	Tctl.SetValue(str (format_number(value)))
	697	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
	698	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	699	self.fixed_param.append([None,name2, Tctl,None,None,
	700	None, None,None])
	701	elif p=="nsigmas":
[920a6e5]	702	ix = 7
[780d095]	703	value= self.model.getParam(name3)
[d7b7156]	704	Tct2 = self.ModelTextCtrl(self, -1,
[2296316]	705	size=(_BOX_WIDTH/2.2,20),
[780d095]	706	style=wx.TE_PROCESS_ENTER)
[1a94c36]	707
[c985bef]	708	Tct2.SetValue(str (format_number(value)))
	709	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
[780d095]	710	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[2296316]	711	#ix +=1
	712	#self.sizer4_4.Add((20,20), (iy,ix),(1,1),
	713	# wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[920a6e5]	714
[2296316]	715	self.fixed_param.append([None, name3, Tct2,
	716	None, None, None,
	717	None, None])
	718
	719
	720	ix = 8
	721	disp_box = wx.ComboBox(self, -1,size=(65,-1),
	722	style=wx.CB_READONLY, name = '%s'% name1)
	723	for key, value in self.polydisp.iteritems():
	724	name_disp = str(key)
	725	disp_box.Append(name_disp,value)
	726	disp_box.SetStringSelection("gaussian")
	727	wx.EVT_COMBOBOX(disp_box,-1, self._on_disp_func)
	728	self.sizer4_4.Add(disp_box,(iy,ix),(1,1), wx.EXPAND)
	729	self.fittable_param.append([cb,name1,ctl1,text2,
	730	ctl2, ctl3, ctl4, disp_box])
	731
[780d095]	732	ix =0
	733	iy +=1
[d7b7156]	734	self.sizer4_4.Add((20,20),(iy,ix),(1,1),
	735	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
	736	first_orient = True
[780d095]	737	for item in self.model.dispersion.keys():
	738	if item in self.model.orientation_params:
[edd166b]	739	if not self.disp_cb_dict.has_key(item):
	740	self.disp_cb_dict[item]= None
[d7b7156]	741	name0="Distribution of " + item
[780d095]	742	name1=item+".width"
	743	name2=item+".npts"
	744	name3=item+".nsigmas"
[d7b7156]	745
[c99a6c5]	746	if not self.model.details.has_key(name1):
[b421b1a]	747	self.model.details [name1] = ["",None,None]
	748
	749
[780d095]	750	iy += 1
	751	for p in self.model.dispersion[item].keys():
	752
	753	if p=="width":
	754	ix = 0
[d7b7156]	755	cb = wx.CheckBox(self, -1, name0, (10, 10))
[2296316]	756	cb.SetToolTipString("Check mark to fit")
[780d095]	757	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
	758	self.sizer4_4.Add( cb,( iy, ix),(1,1),
[d7b7156]	759	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE,
[2296316]	760	5)
[ba1f0b2]	761	if self.data.__class__.__name__ == "Data2D" or \
	762	self.enable2D:
[6dc9ad8]	763	cb.Show(True)
[c99a6c5]	764	elif cb.IsShown():
[6dc9ad8]	765	cb.Hide()
[780d095]	766	ix = 1
	767	value= self.model.getParam(name1)
[2296316]	768	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/1.3,
[d7b7156]	769	20),style=wx.TE_PROCESS_ENTER)
[01b6bd0]	770	poly_tip = "Absolute Sigma for %s." % item
	771	ctl1.SetToolTipString(poly_tip)
[2296316]	772	ctl1.SetValue(str (format_number(value, True)))
[ba1f0b2]	773	if self.data.__class__.__name__ == "Data2D" or \
	774	self.enable2D:
[d7b7156]	775	if first_orient:
[01b6bd0]	776	values.SetLabel('PD[ratio], Sig[deg]')
	777	poly_text = "PD(polydispersity for lengths):\n"
	778	poly_text += "It should be a value between"
	779	poly_text += "0 and 1\n"
	780	poly_text += "Sigma for angles: \n"
	781	poly_text += "It is the STD (ratio*mean)"
[2b0f822]	782	poly_text += " of the distribution.\n "
[01b6bd0]	783
	784	values.SetToolTipString(poly_text)
[d7b7156]	785	first_orient = False
[6dc9ad8]	786	ctl1.Show(True)
[c99a6c5]	787	elif ctl1.IsShown():
[6dc9ad8]	788	ctl1.Hide()
[d7b7156]	789
[780d095]	790	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
	791	## text to show error sign
	792	ix = 2
	793	text2=wx.StaticText(self, -1, '+/-')
	794	self.sizer4_4.Add(text2,(iy, ix),(1,1),
	795	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	796	text2.Hide()
[b421b1a]	797
[780d095]	798	ix = 3
[2296316]	799	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH/1.3,20),
[d7b7156]	800	style=0)
[b421b1a]	801
[d7b7156]	802	self.sizer4_4.Add(ctl2, (iy,ix),(1,1),
	803	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[b421b1a]	804	ctl2.Hide()
[920a6e5]	805
	806	ix = 4
[d7b7156]	807	ctl3 = self.ModelTextCtrl(self, -1,
	808	size=(_BOX_WIDTH/2,20),
	809	style=wx.TE_PROCESS_ENTER,
	810	text_enter_callback = self._onparamRangeEnter)
[eacf1d66]	811
[d7b7156]	812	self.sizer4_4.Add(ctl3, (iy,ix),(1,1),
	813	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[c99a6c5]	814
[920a6e5]	815	ctl3.Hide()
	816
	817	ix = 5
[d7b7156]	818	ctl4 = self.ModelTextCtrl(self, -1,
	819	size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
	820	text_enter_callback = self._onparamRangeEnter)
	821	self.sizer4_4.Add(ctl4, (iy,ix),(1,1),
	822	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[920a6e5]	823	ctl4.Hide()
	824
[ba1f0b2]	825	if self.data.__class__.__name__ == "Data2D" or \
	826	self.enable2D:
[920a6e5]	827	ctl3.Show(True)
[c99a6c5]	828	ctl4.Show(True)
[2296316]	829
[780d095]	830	elif p=="npts":
[920a6e5]	831	ix = 6
[780d095]	832	value= self.model.getParam(name2)
[d7b7156]	833	Tctl = self.ModelTextCtrl(self, -1,
[2296316]	834	size=(_BOX_WIDTH/2.2, 20),
[780d095]	835	style=wx.TE_PROCESS_ENTER)
[1a94c36]	836
[780d095]	837	Tctl.SetValue(str (format_number(value)))
[ba1f0b2]	838	if self.data.__class__.__name__ == "Data2D" or \
	839	self.enable2D:
[6dc9ad8]	840	Tctl.Show(True)
[780d095]	841	else:
[6dc9ad8]	842	Tctl.Hide()
[780d095]	843	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
	844	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	845	self.fixed_param.append([None,name2, Tctl,None,None,
	846	None, None,None])
[d7b7156]	847	self.orientation_params_disp.append([None,name2,
	848	Tctl,None,None,
[780d095]	849	None, None,None])
	850	elif p=="nsigmas":
[920a6e5]	851	ix = 7
[780d095]	852	value= self.model.getParam(name3)
[d7b7156]	853	Tct2 = self.ModelTextCtrl(self, -1,
[2296316]	854	size=(_BOX_WIDTH/2.2,20),
[780d095]	855	style=wx.TE_PROCESS_ENTER)
[1a94c36]	856
[c985bef]	857	Tct2.SetValue(str (format_number(value)))
[ba1f0b2]	858	if self.data.__class__.__name__ == "Data2D" or \
	859	self.enable2D:
[c985bef]	860	Tct2.Show(True)
[780d095]	861	else:
[c985bef]	862	Tct2.Hide()
	863	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
[780d095]	864	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[2296316]	865
[7975f2b]	866
[c985bef]	867	self.fixed_param.append([None,name3, Tct2
[d7b7156]	868	,None,None, None, None,None])
[920a6e5]	869
[d7b7156]	870	self.orientation_params_disp.append([None,name3,
	871	Tct2 ,None,None, None, None,None])
	872
[2296316]	873
	874	ix = 8
	875	disp_box = wx.ComboBox(self, -1,size=(65,-1),
	876	style=wx.CB_READONLY, name = '%s'% name1)
	877	for key, value in self.polydisp.iteritems():
	878	name_disp = str(key)
	879	disp_box.Append(name_disp,value)
	880	disp_box.SetStringSelection("gaussian")
	881	wx.EVT_COMBOBOX(disp_box,-1, self._on_disp_func)
	882	self.sizer4_4.Add(disp_box,(iy,ix),(1,1), wx.EXPAND)
	883	self.fittable_param.append([cb,name1,ctl1,text2,
	884	ctl2, ctl3, ctl4, disp_box])
	885	self.orientation_params_disp.append([cb,name1,ctl1,
	886	text2, ctl2, ctl3, ctl4, disp_box])
	887
[ba1f0b2]	888	if self.data.__class__.__name__ == "Data2D" or \
	889	self.enable2D:
[2296316]	890	disp_box.Show(True)
	891	else:
	892	disp_box.Hide()
	893
	894
[b421b1a]	895	self.state.disp_cb_dict = copy.deepcopy(self.disp_cb_dict)
	896
[71f0373]	897	self.state.model = self.model.clone()
[240b9966]	898	## save state into
[4043c96]	899	self.state.cb1 = self.cb1.GetValue()
[920a6e5]	900	self._copy_parameters_state(self.parameters, self.state.parameters)
[240b9966]	901	self._copy_parameters_state(self.orientation_params_disp,
	902	self.state.orientation_params_disp)
[d7b7156]	903	self._copy_parameters_state(self.fittable_param,
	904	self.state.fittable_param)
[240b9966]	905	self._copy_parameters_state(self.fixed_param, self.state.fixed_param)
[d40a9cd]	906
	907
[c77d859]	908	wx.PostEvent(self.parent, StatusEvent(status=\
	909	" Selected Distribution: Gaussian"))
[b324aa9]	910	#Fill the list of fittable parameters
	911	self.select_all_param(event=None)
	912
[71f0373]	913	self.Layout()
[7975f2b]	914
[2296316]	915
	916	def _onDraw(self, event):
	917	"""
	918	Update and Draw the model
	919	"""
	920	if self.model ==None:
	921	msg="Please select a Model first..."
	922	wx.MessageBox(msg, 'Info')
[06aa2eeb]	923
[2296316]	924	return
	925	flag = self._update_paramv_on_fit()
	926	self._onparamEnter_helper()
	927	if not flag:
	928	msg= "The parameters are invalid"
	929	wx.PostEvent(self.parent.parent, StatusEvent(status= msg ))
	930	return
	931
	932
[c77d859]	933	def _onFit(self, event):
	934	"""
[5062bbf]	935	Allow to fit
[c77d859]	936	"""
[504dd9f5]	937	if self.data is None:
[ecfcef6]	938	msg = "Please get Data first..."
[504dd9f5]	939	wx.MessageBox(msg, 'Info')
	940	wx.PostEvent(self._manager.parent, StatusEvent(status=\
	941	"Fit: %s" % msg))
	942	return
	943	if self.model is None:
	944	msg = "Please select a Model first..."
[4470b10]	945	wx.MessageBox(msg, 'Info')
[90a7bbd]	946	wx.PostEvent(self._manager.parent, StatusEvent(status=\
[2296316]	947	"Fit: %s"%msg, type="stop"))
[4470b10]	948	return
[ecfcef6]	949
	950	if len(self.param_toFit) <= 0:
	951	msg= "Select at least one parameter to fit"
	952	wx.MessageBox(msg, 'Info')
	953	wx.PostEvent(self._manager.parent, StatusEvent(status= msg,
	954	type="stop" ))
	955	return
	956
[85b3971]	957	flag = self._update_paramv_on_fit()
[acd0bda3]	958
[c77d859]	959	if not flag:
[7609f1a]	960	msg= "Fitting range or parameters are invalid"
[2296316]	961	wx.PostEvent(self.parent.parent, StatusEvent(status= msg,
	962	type="stop"))
[c77d859]	963	return
[ecfcef6]	964
[7975f2b]	965	self.select_param(event =None)
[acd0bda3]	966
[c99a6c5]	967	#Clear errors if exist from previous fitting
[edd166b]	968	#self._clear_Err_on_Fit()
[d0ce2c30]	969
[d7b7156]	970	# Remove or do not allow fitting on the Q=0 point, especially
	971	# when y(q=0)=None at x[0].
[f95301b]	972	self.qmin_x = float(self.qmin.GetValue())
[c13b8cc]	973	self.qmax_x = float( self.qmax.GetValue())
[66ff250]	974	self._manager._reset_schedule_problem(value=0)
	975	self._manager.schedule_for_fit(uid=self.uid,value=1, fitproblem =None)
	976	self._manager.set_fit_range(uid=self.uid,qmin= self.qmin_x,
[d7b7156]	977	qmax= self.qmax_x)
[ad6dd4c]	978
[c77d859]	979	#single fit
[90a7bbd]	980	self._manager.onFit()
[66ff250]	981	self.btFit.SetLabel("Stop")
	982	self.bind_fit_button()
[7975f2b]	983
[66ff250]	984	def bind_fit_button(self):
	985	"""
	986	bind the fit button to either fit handler or stop fit handler
	987	"""
	988	self.btFit.Unbind(event=wx.EVT_BUTTON, id= self.btFit.GetId())
	989	if self.btFit.GetLabel().lower() == "stop":
[270e240]	990	self.btFit.SetForegroundColour('red')
[66ff250]	991	self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._StopFit,
	992	id=self.btFit.GetId())
	993	elif self.btFit.GetLabel().lower() == "fit":
[e030625]	994	self.btFit.SetDefault()
[270e240]	995	self.btFit.SetForegroundColour('black')
[e030625]	996	#self.btFit.SetBackgroundColour(self.default_bt_colour)
[66ff250]	997	self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._onFit,
	998	id=self.btFit.GetId())
	999	else:
	1000	msg = "FitPage: fit button has unknown label"
	1001	raise ValuerError, msg
	1002	self._manager._reset_schedule_problem(value=0)
	1003
	1004
[ad6dd4c]	1005	def _StopFit(self, event):
	1006	"""
[5062bbf]	1007	Stop fit
[ad6dd4c]	1008	"""
[66ff250]	1009	#if self.engine_type=="scipy":
	1010	self._manager.stop_fit(self.uid)
	1011	self._manager._reset_schedule_problem(value=0)
	1012	self._on_fit_complete()
	1013
[0b12abb5]	1014	def _on_select_model(self, event=None):
[c77d859]	1015	"""
[5062bbf]	1016	call back for model selection
[6747217]	1017	"""
[9466f2d6]	1018
[9a22655]	1019
[59a7f2d]	1020	self._on_select_model_helper()
[70c57ebf]	1021	self.set_model_param_sizer(self.model)
[982e953]	1022	if self.model is None:
	1023	self._set_bookmark_flag(False)
[2657df9]	1024	self._keep.Enable(False)
[982e953]	1025	self._set_save_flag(False)
[3b605bb]	1026	self.enable_disp.SetValue(False)
	1027	self.disable_disp.SetValue(True)
[4043c96]	1028	try:
	1029	self.set_dispers_sizer()
	1030	except:
	1031	pass
[6747217]	1032	self.btFit.SetFocus()
	1033	self.state.enable_disp = self.enable_disp.GetValue()
	1034	self.state.disable_disp = self.disable_disp.GetValue()
	1035	self.state.pinhole_smearer = self.pinhole_smearer.GetValue()
	1036	self.state.slit_smearer = self.slit_smearer.GetValue()
	1037
	1038	self.state.structurecombobox = self.structurebox.GetCurrentSelection()
	1039	self.state.formfactorcombobox = self.formfactorbox.GetCurrentSelection()
	1040
[9237df4]	1041	if self.model != None:
[1258aa3]	1042	if self.data != None:
	1043	self._set_bookmark_flag(True)
[2657df9]	1044	self._keep.Enable(True)
[f932c02]	1045	#self._set_save_flag(True)
[64bda1e]	1046	# Reset smearer, model and data
[6bbeacd4]	1047	self._set_smear(self.data)
[70c57ebf]	1048	try:
[6bbeacd4]	1049	# update smearer sizer
	1050	self.onSmear(None)
[64bda1e]	1051	temp_smear = None
[70c57ebf]	1052	if self.enable_smearer.GetValue():
[64bda1e]	1053	# Set the smearer environments
[6bbeacd4]	1054	temp_smear = self.smearer
[70c57ebf]	1055	except:
[66ff250]	1056	raise
[70c57ebf]	1057	## error occured on chisqr computation
[66ff250]	1058	#pass
[0b12abb5]	1059	## event to post model to fit to fitting plugins
	1060	(ModelEventbox, EVT_MODEL_BOX) = wx.lib.newevent.NewEvent()
[6bbeacd4]	1061
	1062	## set smearing value whether or not
	1063	# the data contain the smearing info
	1064	evt = ModelEventbox(model=self.model,
	1065	smearer=temp_smear,
	1066	qmin=float(self.qmin_x),
[66ff250]	1067	uid=self.uid,
[6bbeacd4]	1068	qmax=float(self.qmax_x))
	1069
	1070	self._manager._on_model_panel(evt=evt)
[0b12abb5]	1071	self.state.model = self.model.clone()
	1072	self.state.model.name = self.model.name
	1073	if event is not None:
[60f8cef]	1074	#self._draw_model()
	1075	self._onDraw(event=None)
[6bbeacd4]	1076	if event != None:
[3595309d]	1077	## post state to fit panel
[e030625]	1078	new_event = PageInfoEvent(page = self)
	1079	wx.PostEvent(self.parent, new_event)
[9466f2d6]	1080	#update list of plugins if new plugin is available
	1081	if self.plugin_rbutton.GetValue():
	1082	temp = self.parent.update_model_list()
	1083	if temp:
	1084	self.model_list_box = temp
	1085	current_val = self.formfactorbox.GetValue()
	1086	pos = self.formfactorbox.GetSelection()
	1087	self._show_combox_helper()
	1088	self.formfactorbox.SetSelection(pos)
	1089	self.formfactorbox.SetValue(current_val)
[36cb4d2f]	1090	self.SetupScrolling()
[9466f2d6]	1091
[0b12abb5]	1092
[dd5949d]	1093	def _onparamEnter(self,event):
	1094	"""
[5062bbf]	1095	when enter value on panel redraw model according to changed
[dd5949d]	1096	"""
[4470b10]	1097	if self.model ==None:
	1098	msg="Please select a Model first..."
	1099	wx.MessageBox(msg, 'Info')
[90a7bbd]	1100	#wx.PostEvent(self._manager.parent, StatusEvent(status=\
[4470b10]	1101	# "Parameters: %s"%msg))
	1102	return
	1103
[51a71a3]	1104	#default flag
[7975f2b]	1105	flag = False
[51a71a3]	1106	self.fitrange = True
	1107	#get event object
[dce84c0]	1108	tcrtl = event.GetEventObject()
	1109
[66ff250]	1110	#wx.PostEvent(self._manager.parent, StatusEvent(status=" \
	1111	# updating ... ",type="update"))
[edd166b]	1112	#Clear msg if previously shown.
	1113	msg= ""
	1114	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
[c99a6c5]	1115
[7975f2b]	1116	if check_float(tcrtl):
[2012eae]	1117	flag = self._onparamEnter_helper()
	1118	self.set_npts2fit()
[51a71a3]	1119	if self.fitrange:
	1120	temp_smearer = None
	1121	if not self.disable_smearer.GetValue():
	1122	temp_smearer= self.current_smearer
[d7b7156]	1123	## set smearing value whether or not
	1124	# the data contain the smearing info
[51a71a3]	1125	if self.slit_smearer.GetValue():
	1126	flag1 = self.update_slit_smear()
	1127	flag = flag or flag1
	1128	elif self.pinhole_smearer.GetValue():
	1129	flag1 = self.update_pinhole_smear()
	1130	flag = flag or flag1
[ba1f0b2]	1131	elif self.data.__class__.__name__ != "Data2D" and \
	1132	not self.enable2D:
[90a7bbd]	1133	self._manager.set_smearer(smearer=temp_smearer,
[ba1f0b2]	1134	enable2D=self.enable2D,
[66ff250]	1135	uid=self.uid,
[d7b7156]	1136	qmin= float(self.qmin_x),
[6bbeacd4]	1137	qmax= float(self.qmax_x),
	1138	draw=True)
[51a71a3]	1139	if flag:
[f72333f]	1140	#self.compute_chisqr(smearer= temp_smearer)
[51a71a3]	1141
	1142	## new state posted
	1143	if self.state_change:
	1144	#self._undo.Enable(True)
	1145	event = PageInfoEvent(page = self)
	1146	wx.PostEvent(self.parent, event)
	1147	self.state_change= False
	1148	else:
[d7b7156]	1149	# invalid fit range: do nothing here:
	1150	# msg already displayed in validate
	1151	return
[69bee6d]	1152	else:
[7975f2b]	1153	self.save_current_state()
[69bee6d]	1154	msg= "Cannot Plot :Must enter a number!!! "
	1155	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
[7609f1a]	1156
	1157	self.save_current_state()
	1158	return
	1159
[e2f7b92]	1160	def _onparamRangeEnter(self, event):
[920a6e5]	1161	"""
[5062bbf]	1162	Check validity of value enter in the parameters range field
[920a6e5]	1163	"""
[6bbeacd4]	1164	#if self.check_invalid_panel():
	1165	# return
[920a6e5]	1166	tcrtl= event.GetEventObject()
[edd166b]	1167	#Clear msg if previously shown.
	1168	msg= ""
	1169	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	1170	# Flag to register when a parameter has changed.
	1171	is_modified = False
[920a6e5]	1172	if tcrtl.GetValue().lstrip().rstrip()!="":
	1173	try:
	1174	value = float(tcrtl.GetValue())
	1175	tcrtl.SetBackgroundColour(wx.WHITE)
[edd166b]	1176	self._check_value_enter(self.fittable_param ,is_modified)
	1177	self._check_value_enter(self.parameters ,is_modified)
[920a6e5]	1178	except:
	1179	tcrtl.SetBackgroundColour("pink")
[edd166b]	1180	msg= "Model Error:wrong value entered : %s"% sys.exc_value
	1181	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	1182	return
[920a6e5]	1183	else:
	1184	tcrtl.SetBackgroundColour(wx.WHITE)
[e2f7b92]	1185
[edd166b]	1186	#self._undo.Enable(True)
	1187	self.save_current_state()
	1188	event = PageInfoEvent(page = self)
	1189	wx.PostEvent(self.parent, event)
	1190	self.state_change= False
[c69b6d5]	1191
[12eac73]	1192
	1193	def _onQrangeEnter(self, event):
	1194	"""
[5062bbf]	1195	Check validity of value enter in the Q range field
[12eac73]	1196	"""
[6bbeacd4]	1197	#if self.check_invalid_panel():
	1198	# return
[12eac73]	1199	tcrtl= event.GetEventObject()
	1200	#Clear msg if previously shown.
	1201	msg= ""
	1202	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	1203	# Flag to register when a parameter has changed.
	1204	is_modified = False
	1205	if tcrtl.GetValue().lstrip().rstrip()!="":
	1206	try:
	1207	value = float(tcrtl.GetValue())
	1208	tcrtl.SetBackgroundColour(wx.WHITE)
	1209
	1210	# If qmin and qmax have been modified, update qmin and qmax
[f95301b]	1211	if self._validate_qrange( self.qmin, self.qmax):
	1212	tempmin = float(self.qmin.GetValue())
[12eac73]	1213	if tempmin != self.qmin_x:
	1214	self.qmin_x = tempmin
	1215	tempmax = float(self.qmax.GetValue())
	1216	if tempmax != self.qmax_x:
	1217	self.qmax_x = tempmax
	1218	else:
	1219	tcrtl.SetBackgroundColour("pink")
	1220	msg= "Model Error:wrong value entered : %s"% sys.exc_value
	1221	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	1222	return
	1223
	1224	except:
	1225	tcrtl.SetBackgroundColour("pink")
	1226	msg= "Model Error:wrong value entered : %s"% sys.exc_value
	1227	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	1228	return
	1229	#Check if # of points for theory model are valid(>0).
[51a71a3]	1230	# check for 2d
[ba64348]	1231	if self.data is not None:
[ba1f0b2]	1232	if self.data.__class__.__name__ == "Data2D" or \
	1233	self.enable2D:
[ba64348]	1234	# set mask
	1235	radius= numpy.sqrt( self.data.qx_data*self.data.qx_data +
	1236	self.data.qy_data*self.data.qy_data )
	1237	index_data = ((self.qmin_x <= radius)& \
	1238	(radius<= self.qmax_x))
	1239	index_data = (index_data)&(self.data.mask)
	1240	index_data = (index_data)&(numpy.isfinite(self.data.data))
	1241	if len(index_data[index_data]) < 10:
	1242	msg = "Cannot Plot :No or too little npts in"
	1243	msg += " that data range!!! "
	1244	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	1245	return
	1246	else:
	1247	self.data.mask = index_data
	1248	#self.Npts_fit.SetValue(str(len(self.data.mask)))
	1249	self.set_npts2fit()
[51a71a3]	1250	else:
[ba64348]	1251	index_data = ((self.qmin_x <= self.data.x)& \
	1252	(self.data.x <= self.qmax_x))
	1253	self.Npts_fit.SetValue(str(len(self.data.x[index_data])))
[0cf97c5]	1254	else:
	1255	self.npts_x = self.Npts_total.GetValue()
	1256	self._save_plotting_range()
	1257
[12eac73]	1258	else:
	1259	tcrtl.SetBackgroundColour("pink")
	1260	msg= "Model Error:wrong value entered!!!"
	1261	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	1262
[f72333f]	1263	self._draw_model()
	1264	##update chi2
	1265	#self.compute_chisqr(smearer= temp_smearer)
[12eac73]	1266	#self._undo.Enable(True)
	1267	self.save_current_state()
	1268	event = PageInfoEvent(page = self)
	1269	wx.PostEvent(self.parent, event)
	1270	self.state_change= False
[51a71a3]	1271	return
[5062bbf]	1272
[edd166b]	1273	def _clear_Err_on_Fit(self):
	1274	"""
[5062bbf]	1275	hide the error text control shown
	1276	after fitting
[edd166b]	1277	"""
	1278
	1279	if hasattr(self,"text2_3"):
	1280	self.text2_3.Hide()
	1281
	1282	if len(self.parameters)>0:
	1283	for item in self.parameters:
	1284	#Skip t ifhe angle parameters if 1D data
[ba1f0b2]	1285	if self.data.__class__.__name__ != "Data2D" and \
	1286	not self.enable2D:
[edd166b]	1287	if item in self.orientation_params:
	1288	continue
	1289	if item in self.param_toFit:
	1290	continue
	1291	## hide statictext +/-
	1292	if item[3]!=None and item[3].IsShown():
	1293	item[3].Hide()
	1294	## hide textcrtl for error after fit
	1295	if item[4]!=None and item[4].IsShown():
	1296	item[4].Hide()
[7975f2b]	1297
[edd166b]	1298	if len(self.fittable_param)>0:
	1299	for item in self.fittable_param:
	1300	#Skip t ifhe angle parameters if 1D data
[ba1f0b2]	1301	if self.data.__class__.__name__ != "Data2D" and \
	1302	not self.enable2D:
[edd166b]	1303	if item in self.orientation_params:
	1304	continue
	1305	if item in self.param_toFit:
	1306	continue
	1307	## hide statictext +/-
	1308	if item[3]!=None and item[3].IsShown():
	1309	item[3].Hide()
	1310	## hide textcrtl for error after fit
	1311	if item[4]!=None and item[4].IsShown():
	1312	item[4].Hide()
	1313	return
[920a6e5]	1314
[7609f1a]	1315	def _get_defult_custom_smear(self):
	1316	"""
[5062bbf]	1317	Get the defult values for custum smearing.
[7609f1a]	1318	"""
	1319	# get the default values
	1320	if self.dxl == None: self.dxl = 0.0
	1321	if self.dxw == None: self.dxw = ""
	1322	if self.dx_min == None: self.dx_min = SMEAR_SIZE_L
	1323	if self.dx_max == None: self.dx_max = SMEAR_SIZE_H
	1324
	1325	def _get_smear_info(self):
	1326	"""
[5062bbf]	1327	Get the smear info from data.
	1328
	1329	:return: self.smear_type, self.dq_l and self.dq_r,
[d7b7156]	1330	respectively the type of the smear, dq_min and
	1331	dq_max for pinhole smear data
[7609f1a]	1332	while dxl and dxw for slit smear
[5062bbf]	1333
[7609f1a]	1334	"""
	1335
	1336	# default
	1337	self.smear_type = None
	1338	self.dq_l = None
	1339	self.dq_r = None
[f72333f]	1340	data = self.data
	1341	if self.data is None:
[7609f1a]	1342	return
[ba1f0b2]	1343	elif self.data.__class__.__name__ == "Data2D" or \
	1344	self.enable2D:
[f72333f]	1345	if data.dqx_data == None or data.dqy_data ==None:
	1346	return
[d7b7156]	1347	elif self.smearer != None and (data.dqx_data.any()!=0) and \
	1348	(data.dqx_data.any()!=0):
[f72333f]	1349	self.smear_type = "Pinhole2d"
	1350	self.dq_l = format_number(numpy.average(data.dqx_data))
	1351	self.dq_r = format_number(numpy.average(data.dqy_data))
	1352	return
	1353	else:
	1354	return
[7609f1a]	1355	# check if it is pinhole smear and get min max if it is.
	1356	if data.dx != None and all(data.dx !=0):
	1357	self.smear_type = "Pinhole"
[f72333f]	1358	self.dq_l = data.dx[0]
	1359	self.dq_r = data.dx[-1]
[7609f1a]	1360
	1361	# check if it is slit smear and get min max if it is.
	1362	elif data.dxl != None or data.dxw != None:
	1363	self.smear_type = "Slit"
	1364	if data.dxl != None and all(data.dxl !=0):
	1365	self.dq_l = data.dxl[0]
	1366	if data.dxw != None and all(data.dxw !=0):
[5062bbf]	1367	self.dq_r = data.dxw[0]
[7609f1a]	1368	#return self.smear_type,self.dq_l,self.dq_r
	1369
	1370	def _show_smear_sizer(self):
	1371	"""
[5062bbf]	1372	Show only the sizers depending on smear selection
[7609f1a]	1373	"""
[f72333f]	1374	# smear disabled
[7609f1a]	1375	if self.disable_smearer.GetValue():
	1376	self.smear_description_none.Show(True)
[f72333f]	1377	# 2Dsmear
	1378	elif self._is_2D():
	1379	self.smear_description_accuracy_type.Show(True)
	1380	self.smear_accuracy.Show(True)
	1381	self.smear_description_accuracy_type.Show(True)
	1382	self.smear_description_2d.Show(True)
	1383	self.smear_description_2d_x.Show(True)
	1384	self.smear_description_2d_y.Show(True)
	1385	if self.pinhole_smearer.GetValue():
	1386	self.smear_pinhole_min.Show(True)
	1387	self.smear_pinhole_max.Show(True)
	1388	# smear from data
[7609f1a]	1389	elif self.enable_smearer.GetValue():
[f72333f]	1390
[7609f1a]	1391	self.smear_description_dqdata.Show(True)
	1392	if self.smear_type != None:
	1393	self.smear_description_smear_type.Show(True)
	1394	if self.smear_type == 'Slit':
	1395	self.smear_description_slit_height.Show(True)
[f72333f]	1396	self.smear_description_slit_width.Show(True)
[7609f1a]	1397	elif self.smear_type == 'Pinhole':
	1398	self.smear_description_pin_min.Show(True)
	1399	self.smear_description_pin_max.Show(True)
[f72333f]	1400	self.smear_description_smear_type.Show(True)
	1401	self.smear_description_type.Show(True)
[7609f1a]	1402	self.smear_data_left.Show(True)
	1403	self.smear_data_right.Show(True)
[f72333f]	1404	# custom pinhole smear
[7609f1a]	1405	elif self.pinhole_smearer.GetValue():
[f72333f]	1406	if self.smear_type == 'Pinhole':
	1407	self.smear_message_new_p.Show(True)
	1408	self.smear_description_pin_min.Show(True)
	1409	self.smear_description_pin_max.Show(True)
	1410
[7609f1a]	1411	self.smear_pinhole_min.Show(True)
	1412	self.smear_pinhole_max.Show(True)
[f72333f]	1413	# custom slit smear
[7609f1a]	1414	elif self.slit_smearer.GetValue():
	1415	self.smear_message_new_s.Show(True)
	1416	self.smear_description_slit_height.Show(True)
	1417	self.smear_slit_height.Show(True)
	1418	self.smear_description_slit_width.Show(True)
	1419	self.smear_slit_width.Show(True)
	1420
	1421	def _hide_all_smear_info(self):
	1422	"""
[5062bbf]	1423	Hide all smearing messages in the set_smearer sizer
[7609f1a]	1424	"""
	1425	self.smear_description_none.Hide()
	1426	self.smear_description_dqdata.Hide()
	1427	self.smear_description_type.Hide()
	1428	self.smear_description_smear_type.Hide()
[f72333f]	1429	self.smear_description_accuracy_type.Hide()
	1430	self.smear_description_2d_x.Hide()
	1431	self.smear_description_2d_y.Hide()
[7609f1a]	1432	self.smear_description_2d.Hide()
[f72333f]	1433
	1434	self.smear_accuracy.Hide()
[7609f1a]	1435	self.smear_data_left.Hide()
	1436	self.smear_data_right.Hide()
	1437	self.smear_description_pin_min.Hide()
	1438	self.smear_pinhole_min.Hide()
	1439	self.smear_description_pin_max.Hide()
	1440	self.smear_pinhole_max.Hide()
	1441	self.smear_description_slit_height.Hide()
	1442	self.smear_slit_height.Hide()
	1443	self.smear_description_slit_width.Hide()
	1444	self.smear_slit_width.Hide()
	1445	self.smear_message_new_p.Hide()
	1446	self.smear_message_new_s.Hide()
	1447
[f72333f]	1448	def _set_accuracy_list(self):
	1449	"""
[5062bbf]	1450	Set the list of an accuracy in 2D custum smear: Xhigh, High, Med, or Low
[f72333f]	1451	"""
	1452	# list of accuracy choices
	1453	list = ['Low','Med','High','Xhigh']
	1454	for idx in range(len(list)):
	1455	self.smear_accuracy.Append(list[idx],idx)
	1456
[fb59ed9]	1457	def _set_fun_box_list(self,fun_box):
	1458	"""
	1459	Set the list of func for multifunctional models
	1460	"""
	1461	# Check if it is multi_functional model
	1462	if self.model.__class__ not in self.model_list_box["Multi-Functions"]:
	1463	return None
	1464	# Get the func name list
	1465	list = self.model.fun_list
	1466	if len(list) == 0:
	1467	return None
	1468	# build function (combo)box
	1469	ind = 0
	1470	while(ind < len(list)):
	1471	for key, val in list.iteritems():
	1472	if (val == ind):
	1473	fun_box.Append(key,val)
	1474	break
	1475	ind += 1
	1476
[f72333f]	1477	def _on_select_accuracy(self,event):
	1478	"""
[5062bbf]	1479	Select an accuracy in 2D custom smear: Xhigh, High, Med, or Low
[f72333f]	1480	"""
	1481	#event.Skip()
[4fbc93e]	1482	# Check if the accuracy is same as before
	1483	#self.smear2d_accuracy = event.GetEventObject().GetValue()
	1484	self.smear2d_accuracy = self.smear_accuracy.GetValue()
[f72333f]	1485	if self.pinhole_smearer.GetValue():
	1486	self.onPinholeSmear(event=None)
[4fbc93e]	1487	else:
	1488	self.onSmear(event=None)
	1489	if self.current_smearer != None:
[d7b7156]	1490	self.current_smearer.set_accuracy(accuracy =
	1491	self.smear2d_accuracy)
[f72333f]	1492	event.Skip()
[fb59ed9]	1493
	1494	def _on_fun_box(self,event):
	1495	"""
	1496	Select an func: Erf,Rparabola,LParabola
	1497	"""
	1498	fun_val = None
	1499	fun_box = event.GetEventObject()
	1500	name = fun_box.Name
	1501	value = fun_box.GetValue()
	1502	if self.model.fun_list.has_key(value):
	1503	fun_val = self.model.fun_list[value]
	1504
	1505	self.model.setParam(name,fun_val)
	1506	# save state
[d7b7156]	1507	self._copy_parameters_state(self.str_parameters,
	1508	self.state.str_parameters)
[fb59ed9]	1509	# update params
	1510	self._update_paramv_on_fit()
	1511	# draw
	1512	self._draw_model()
	1513	self.Refresh()
	1514	# get ready for new event
	1515	event.Skip()
[4fbc93e]	1516
[51a71a3]	1517	def _onMask(self, event):
	1518	"""
[5062bbf]	1519	Build a panel to allow to edit Mask
[51a71a3]	1520	"""
	1521
[d7b7156]	1522	from sans.guiframe.local_perspectives.plotting.masking \
	1523	import MaskPanel as MaskDialog
[51a71a3]	1524
	1525	self.panel = MaskDialog(self, data=self.data,id =-1 )
	1526	self.panel.Bind(wx.EVT_CLOSE, self._draw_masked_model)
	1527	self.panel.ShowModal()
	1528	#wx.PostEvent(self.parent, event)
	1529
	1530	def _draw_masked_model(self,event):
[f72333f]	1531	"""
	1532	Draw model image w/mask
	1533	"""
[51a71a3]	1534	event.Skip()
	1535
	1536	is_valid_qrange = self._update_paramv_on_fit()
[247cb58]	1537
[51a71a3]	1538	if is_valid_qrange:
[247cb58]	1539	# try re draw the model plot if it exists
[51a71a3]	1540	self._draw_model()
	1541	self.panel.Destroy() # frame
	1542	self.set_npts2fit()
[247cb58]	1543	elif self.model == None:
	1544	self.panel.Destroy()
	1545	self.set_npts2fit()
	1546	msg= "No model is found on updating MASK in the model plot... "
	1547	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
[51a71a3]	1548	else:
[247cb58]	1549	msg = ' Please consider your Q range, too.'
[51a71a3]	1550	self.panel.ShowMessage(msg)
[882a912]	1551
[6bbeacd4]	1552	def _set_smear(self, data):
	1553	"""
	1554	"""
	1555	if data is None:
	1556	return
[ba1f0b2]	1557	self.smearer = smear_selection(data, self.model)
[6bbeacd4]	1558	self.disable_smearer.SetValue(True)
	1559	if self.smearer == None:
	1560	self.enable_smearer.Disable()
	1561	else:
	1562	self.enable_smearer.Enable()
	1563
[a5701e6]	1564	def get_view_mode(self):
	1565	"""
	1566	return True if the panel allow 2D or False if 1D
	1567	"""
	1568	return self.enable2D
	1569
[9237df4]	1570	def set_data(self, data):
[882a912]	1571	"""
[5062bbf]	1572	reset the current data
[882a912]	1573	"""
[6bbeacd4]	1574	flag = False
	1575	if self.data is None and data is not None:
	1576	self.window_name = str(data.name)
	1577	## Title to appear on top of the window
	1578	self.window_caption = str(data.name)
	1579	flag = True
[9237df4]	1580	self.data = data
	1581	if self.data is None:
	1582	data_min = ""
	1583	data_max = ""
	1584	data_name = ""
[982e953]	1585	self._set_bookmark_flag(False)
[2657df9]	1586	self._keep.Enable(False)
[982e953]	1587	self._set_save_flag(False)
[9237df4]	1588	else:
[1258aa3]	1589	if self.model != None:
	1590	self._set_bookmark_flag(True)
[2657df9]	1591	self._keep.Enable(True)
[982e953]	1592	self._set_save_flag(True)
[aad74b3]	1593	self._set_preview_flag(True)
[ba1f0b2]	1594
[6bbeacd4]	1595	self._set_smear(data)
[7609f1a]	1596	# more disables for 2D
[ba1f0b2]	1597	if self.data.__class__.__name__ == "Data2D" or \
	1598	self.enable2D:
[7609f1a]	1599	self.slit_smearer.Disable()
[ba1f0b2]	1600	self.pinhole_smearer.Enable(True)
[51a71a3]	1601	self.default_mask = copy.deepcopy(self.data.mask)
[0f8f831]	1602	else:
	1603	self.slit_smearer.Enable(True)
	1604	self.pinhole_smearer.Enable(True)
[e2f0554]	1605
[ffa69b6]	1606	self.formfactorbox.Enable()
	1607	self.structurebox.Enable()
[9237df4]	1608	data_name = self.data.name
	1609	#set maximum range for x in linear scale
	1610	if not hasattr(self.data,"data"): #Display only for 1D data fit
	1611	# Minimum value of data
	1612	data_min = min(self.data.x)
	1613	# Maximum value of data
	1614	data_max = max(self.data.x)
[51a71a3]	1615	#number of total data points
	1616	self.Npts_total.SetValue(str(len(self.data.x)))
	1617	#default:number of data points selected to fit
	1618	self.Npts_fit.SetValue(str(len(self.data.x)))
[19403da]	1619	self.btEditMask.Disable()
	1620	self.EditMask_title.Disable()
[9237df4]	1621	else:
[e2f0554]	1622
[9237df4]	1623	## Minimum value of data
	1624	data_min = 0
	1625	x = max(math.fabs(self.data.xmin), math.fabs(self.data.xmax))
	1626	y = max(math.fabs(self.data.ymin), math.fabs(self.data.ymax))
	1627	## Maximum value of data
	1628	data_max = math.sqrt(xx + yy)
[51a71a3]	1629	#number of total data points
	1630	self.Npts_total.SetValue(str(len(self.data.data)))
	1631	#default:number of data points selected to fit
	1632	self.Npts_fit.SetValue(str(len(self.data.data)))
[19403da]	1633	self.btEditMask.Enable()
	1634	self.EditMask_title.Enable()
[e9875db]	1635	self.Npts_total.SetEditable(False)
	1636	self.Npts_total.SetBackgroundColour(\
	1637	self.GetParent().GetBackgroundColour())
	1638
	1639	self.Npts_total.Bind(wx.EVT_MOUSE_EVENTS, self._npts_click)
	1640	#self.Npts_total.Disable()
[9237df4]	1641	self.dataSource.SetValue(data_name)
	1642	self.qmin_x = data_min
	1643	self.qmax_x = data_max
[ffa69b6]	1644	self.minimum_q.SetValue(str(data_min))
	1645	self.maximum_q.SetValue(str(data_max))
[f95301b]	1646	self.qmin.SetValue(str(data_min))
[ffa69b6]	1647	self.qmax.SetValue(str(data_max))
[f95301b]	1648	self.qmin.SetBackgroundColour("white")
[ffa69b6]	1649	self.qmax.SetBackgroundColour("white")
	1650	self.state.data = data
	1651	self.state.qmin = self.qmin_x
	1652	self.state.qmax = self.qmax_x
[e2f0554]	1653
[6bbeacd4]	1654	#update model plot with new data information
	1655	if flag:
[e2f0554]	1656	#set model view button
	1657	if self.data.__class__.__name__ == "Data2D":
	1658	self.enable2D = True
	1659	self.model_view.SetLabel("2D Mode")
	1660	else:
	1661	self.enable2D = False
	1662	self.model_view.SetLabel("1D Mode")
[fa65e99]	1663
[e2f0554]	1664	self.model_view.Disable()
[6bbeacd4]	1665	self._draw_model()
[e9875db]	1666
	1667	def _npts_click(self, event):
	1668	"""
	1669	Prevent further handling of the mouse event on Npts_total
	1670	by not calling Skip().
	1671	"""
	1672	pass
	1673
[240b9966]	1674	def reset_page(self, state,first=False):
[a074145]	1675	"""
[5062bbf]	1676	reset the state
[a074145]	1677	"""
	1678	self.reset_page_helper(state)
[0b12abb5]	1679	#import sans.guiframe.gui_manager
	1680	#evt = ModelEventbox(model=state.model)
	1681	#wx.PostEvent(self.event_owner, evt)
[edd166b]	1682
	1683	if self.engine_type != None:
[90a7bbd]	1684	self._manager._on_change_engine(engine=self.engine_type)
[7975f2b]	1685
[edd166b]	1686	self.select_param(event = None)
	1687	#Save state_fit
[c985bef]	1688	self.save_current_state_fit()
[7975f2b]	1689	self._lay_out()
[c985bef]	1690	self.Refresh()
[edd166b]	1691
[2140e68]	1692	def get_range(self):
	1693	"""
[5062bbf]	1694	return the fitting range
[2140e68]	1695	"""
[c9a4377]	1696	return float(self.qmin_x) , float(self.qmax_x)
[7975f2b]	1697
	1698	def get_npts2fit(self):
	1699	"""
[5062bbf]	1700	return numbers of data points within qrange
	1701
	1702	:Note: This is for Park where chi2 is not normalized by Npts of fit
	1703
[7975f2b]	1704	"""
[6bbeacd4]	1705	if self.data is None:
	1706	return
[7975f2b]	1707	npts2fit = 0
	1708	qmin,qmax = self.get_range()
[ba1f0b2]	1709	if self.data.__class__.__name__ == "Data2D" or \
	1710	self.enable2D:
[d7b7156]	1711	radius= numpy.sqrt( self.data.qx_data*self.data.qx_data +
	1712	self.data.qy_data*self.data.qy_data )
[51a71a3]	1713	index_data = (self.qmin_x <= radius)&(radius<= self.qmax_x)
	1714	index_data= (index_data)&(self.data.mask)
	1715	index_data = (index_data)&(numpy.isfinite(self.data.data))
	1716	npts2fit = len(self.data.data[index_data])
[7975f2b]	1717	else:
	1718	for qx in self.data.x:
	1719	if qx >= qmin and qx <= qmax:
	1720	npts2fit += 1
	1721	return npts2fit
	1722
[51a71a3]	1723	def set_npts2fit(self):
	1724	"""
[5062bbf]	1725	setValue Npts for fitting
[51a71a3]	1726	"""
	1727	self.Npts_fit.SetValue(str(self.get_npts2fit()))
	1728
[c69b6d5]	1729	def get_chi2(self):
	1730	"""
[5062bbf]	1731	return the current chi2
[c69b6d5]	1732	"""
[2012eae]	1733	return self.tcChi.GetValue()
[c77d859]	1734
	1735	def get_param_list(self):
	1736	"""
[5062bbf]	1737	:return self.param_toFit: list containing references to TextCtrl
[c77d859]	1738	checked.Theses TextCtrl will allow reference to parameters to fit.
[5062bbf]	1739
	1740	:raise: if return an empty list of parameter fit will nnote work
[c77d859]	1741	properly so raise ValueError,"missing parameter to fit"
	1742	"""
	1743	if self.param_toFit !=[]:
	1744	return self.param_toFit
	1745	else:
[ba1f0b2]	1746	msg = "missing parameters to fit"
	1747	wx.MessageBox(msg, 'warning')
	1748	return False
	1749	#raise ValueError,"missing parameters to fit"
[c77d859]	1750
[2296316]	1751	def onsetValues(self, chisqr, p_name, out, cov):
[c77d859]	1752	"""
[5062bbf]	1753	Build the panel from the fit result
	1754
	1755	:param chisqr: Value of the goodness of fit metric
	1756	:param p_name: the name of parameters
	1757	:param out: list of parameter with the best value found during fitting
	1758	:param cov: Covariance matrix
	1759
[c77d859]	1760	"""
[edd166b]	1761	if out == None or not numpy.isfinite(chisqr):
	1762	raise ValueError,"Fit error occured..."
	1763
	1764	is_modified = False
	1765	has_error = False
[7975f2b]	1766
	1767	#Hide textctrl boxes of errors.
[edd166b]	1768	self._clear_Err_on_Fit()
[7975f2b]	1769
	1770	#Check if chi2 is finite
[2296316]	1771	if chisqr != None and numpy.isfinite(chisqr):
[e575db9]	1772	#format chi2
[7609f1a]	1773	if self.engine_type == "park":
[e575db9]	1774	npt_fit = float(self.get_npts2fit())
[7609f1a]	1775	if npt_fit > 0:
	1776	chisqr =chisqr/npt_fit
[2296316]	1777	chi2 = format_number(chisqr, True)
[2012eae]	1778	self.tcChi.SetValue(chi2)
[7975f2b]	1779	self.tcChi.Refresh()
	1780	else:
[2012eae]	1781	self.tcChi.SetValue("-")
[c13b8cc]	1782
[edd166b]	1783	#Hide error title
	1784	if self.text2_3.IsShown():
	1785	self.text2_3.Hide()
	1786
[e473e4f5]	1787	try:
[2296316]	1788	if self.enable_disp.GetValue():
	1789	if hasattr(self,"text_disp_1" ):
	1790	if self.text_disp_1 != None:
	1791	self.text_disp_1.Hide()
[e473e4f5]	1792	except:
[7975f2b]	1793	dispersty = None
[e473e4f5]	1794	pass
[c77d859]	1795	#set the panel when fit result are float not list
[c99a6c5]	1796	if out.__class__== numpy.float64:
[2296316]	1797	self.param_toFit[0][2].SetValue(format_number(out, True))
[0a518e4c]	1798
[c69b6d5]	1799	if self.param_toFit[0][4].IsShown:
	1800	self.param_toFit[0][4].Hide()
[c77d859]	1801	if cov !=None :
	1802	self.text2_3.Show(True)
[e473e4f5]	1803	try:
[2296316]	1804	if self.enable_disp.GetValue():
	1805	if hasattr(self,"text_disp_1" ):
	1806	if self.text_disp_1 !=None:
	1807	self.text_disp_1.Show(True)
[e473e4f5]	1808	except:
	1809	pass
[c99a6c5]	1810
[ad6dd4c]	1811	if cov[0]==None or not numpy.isfinite(cov[0]):
[c69b6d5]	1812	if self.param_toFit[0][3].IsShown:
	1813	self.param_toFit[0][3].Hide()
[7975f2b]	1814	else:
	1815	self.param_toFit[0][3].Show(True)
[69bee6d]	1816	self.param_toFit[0][4].Show(True)
[2296316]	1817	self.param_toFit[0][4].SetValue(format_number(cov[0], True))
[ffb838f]	1818	has_error = True
[c77d859]	1819	else:
[edd166b]	1820
[c69b6d5]	1821	i = 0
[c77d859]	1822	#Set the panel when fit result are list
[7975f2b]	1823	for item in self.param_toFit:
[edd166b]	1824	if len(item)>5 and item != None:
	1825	## reset error value to initial state
[7975f2b]	1826	item[3].Hide()
	1827	item[4].Hide()
	1828
[edd166b]	1829	for ind in range(len(out)):
	1830
	1831	if item[1] == p_name[ind]:
	1832	break
[7975f2b]	1833	if len(out)<=len(self.param_toFit) and out[ind] !=None:
[2296316]	1834	val_out = format_number(out[ind], True)
[7975f2b]	1835	item[2].SetValue(val_out)
[c99a6c5]	1836
[7975f2b]	1837	if(cov !=None):
[edd166b]	1838
	1839	try:
[7975f2b]	1840	if dispersity !=None:
[2296316]	1841	if self.enable_disp.GetValue():
[7975f2b]	1842	if hasattr(self,"text_disp_1" ):
	1843	if self.text_disp_1!=None:
	1844	if not self.text_disp_1.IsShown():
	1845	self.text_disp_1.Show(True)
[edd166b]	1846	except:
	1847	pass
	1848
[7975f2b]	1849	if cov[ind]!=None :
	1850	if numpy.isfinite(float(cov[ind])):
[2296316]	1851	val_err = format_number(cov[ind], True)
[7975f2b]	1852	item[3].Show(True)
	1853	item[4].Show(True)
	1854	item[4].SetValue(val_err)
	1855
	1856	has_error = True
[e575db9]	1857	i += 1
[c99a6c5]	1858	#Show error title when any errors displayed
[b421b1a]	1859	if has_error:
[c99a6c5]	1860	if not self.text2_3.IsShown():
[edd166b]	1861	self.text2_3.Show(True)
[7975f2b]	1862
	1863	## save current state
	1864	self.save_current_state()
[2296316]	1865	#plot model ( when drawing, do not update chisqr value again)
	1866	self._draw_model(update_chisqr=False)
	1867	self._lay_out()
	1868	self.Refresh()
[7975f2b]	1869	#PostStatusEvent
[9237df4]	1870	msg = "Fit completed! "
[90a7bbd]	1871	wx.PostEvent(self._manager.parent, StatusEvent(status=msg))
[c69b6d5]	1872
[7609f1a]	1873	def onPinholeSmear(self, event):
	1874	"""
[5062bbf]	1875	Create a custom pinhole smear object that will change the way residuals
	1876	are compute when fitting
	1877
	1878	:Note: accuracy is given by strings'High','Med', 'Low' FOR 2d,
	1879	None for 1D
	1880
[7609f1a]	1881	"""
	1882
[6bbeacd4]	1883	#if self.check_invalid_panel():
	1884	# return
[7609f1a]	1885	if self.model ==None:
[4470b10]	1886	self.disable_smearer.SetValue(True)
	1887	msg="Please select a Model first..."
	1888	wx.MessageBox(msg, 'Info')
[90a7bbd]	1889	wx.PostEvent(self._manager.parent, StatusEvent(status=\
[7609f1a]	1890	"Smear: %s"%msg))
	1891	return
[4470b10]	1892
[2d409fa]	1893	# Need update param values
[f72333f]	1894	self._update_paramv_on_fit()
	1895
[7609f1a]	1896	# msg default
	1897	msg = None
	1898	if event != None:
	1899	tcrtl= event.GetEventObject()
	1900	# event case of radio button
	1901	if tcrtl.GetValue()== True:
	1902	self.dx_min = 0.0
	1903	self.dx_max = 0.0
	1904	is_new_pinhole = True
	1905	else:
	1906	is_new_pinhole = self._is_changed_pinhole()
[d493f66]	1907	else:
[1da28b8]	1908	is_new_pinhole = True
[7609f1a]	1909	# if any value is changed
	1910	if is_new_pinhole:
	1911	msg = self._set_pinhole_smear()
	1912	# hide all silt sizer
	1913	self._hide_all_smear_info()
[f72333f]	1914
[7609f1a]	1915	##Calculate chi2
[f72333f]	1916	temp_smearer = self.current_smearer
	1917	#self.compute_chisqr(smearer= temp_smearer)
	1918
[7609f1a]	1919	# show relevant slit sizers
	1920	self._show_smear_sizer()
[f72333f]	1921
[7609f1a]	1922	self.sizer_set_smearer.Layout()
	1923	self.Layout()
	1924
	1925	if event != None:
	1926	event.Skip()
	1927	#self._undo.Enable(True)
	1928	self.save_current_state()
	1929	event = PageInfoEvent(page = self)
	1930	wx.PostEvent(self.parent, event)
	1931
	1932	def _is_changed_pinhole(self):
	1933	"""
[5062bbf]	1934	check if any of pinhole smear is changed
	1935
	1936	:return: True or False
	1937
[7609f1a]	1938	"""
	1939	# get the values
	1940	pin_min = self.smear_pinhole_min.GetValue()
	1941	pin_max = self.smear_pinhole_max.GetValue()
	1942
	1943	# Check changes in slit width
	1944	try:
	1945	dx_min = float(pin_min)
	1946	except:
	1947	return True
	1948	if self.dx_min != dx_min:
	1949	return True
	1950
	1951	# Check changes in slit heigth
	1952	try:
	1953	dx_max = float(pin_max)
	1954	except:
	1955	return True
	1956	if self.dx_max != dx_max:
	1957	return True
	1958	return False
	1959
	1960	def _set_pinhole_smear(self):
	1961	"""
[5062bbf]	1962	Set custom pinhole smear
	1963
	1964	:return: msg
	1965
[7609f1a]	1966	"""
	1967	# copy data
	1968	data = copy.deepcopy(self.data)
[f72333f]	1969	if self._is_2D():
	1970	self.smear_type = 'Pinhole2d'
	1971	len_data = len(data.data)
	1972	data.dqx_data = numpy.zeros(len_data)
	1973	data.dqy_data = numpy.zeros(len_data)
	1974	else:
	1975	self.smear_type = 'Pinhole'
	1976	len_data = len(data.x)
	1977	data.dx = numpy.zeros(len_data)
	1978	data.dxl = None
	1979	data.dxw = None
[7609f1a]	1980	msg = None
	1981
	1982	get_pin_min = self.smear_pinhole_min
	1983	get_pin_max = self.smear_pinhole_max
	1984
[f72333f]	1985	if not check_float(get_pin_min):
	1986	get_pin_min.SetBackgroundColour("pink")
	1987	msg= "Model Error:wrong value entered!!!"
	1988	elif not check_float(get_pin_max ):
	1989	get_pin_max.SetBackgroundColour("pink")
	1990	msg= "Model Error:wrong value entered!!!"
	1991	else:
[7609f1a]	1992	if len_data < 2: len_data = 2
	1993	self.dx_min = float(get_pin_min.GetValue())
	1994	self.dx_max = float(get_pin_max.GetValue())
[f72333f]	1995	if self.dx_min < 0:
	1996	get_pin_min.SetBackgroundColour("pink")
	1997	msg= "Model Error:This value can not be negative!!!"
	1998	elif self.dx_max <0:
	1999	get_pin_max.SetBackgroundColour("pink")
	2000	msg= "Model Error:This value can not be negative!!!"
	2001	elif self.dx_min != None and self.dx_max != None:
	2002	if self._is_2D():
	2003	data.dqx_data[data.dqx_data==0] = self.dx_min
	2004	data.dqy_data[data.dqy_data==0] = self.dx_max
	2005	elif self.dx_min == self.dx_max:
[7609f1a]	2006	data.dx[data.dx==0] = self.dx_min
	2007	else:
[f72333f]	2008	step = (self.dx_max - self.dx_min)/(len_data-1)
[d7b7156]	2009	data.dx = numpy.arange(self.dx_min,self.dx_max+step/1.1,
	2010	step)
[7609f1a]	2011	elif self.dx_min != None:
[f72333f]	2012	if self._is_2D(): data.dqx_data[data.dqx_data==0] = self.dx_min
	2013	else: data.dx[data.dx==0] = self.dx_min
[7609f1a]	2014	elif self.dx_max != None:
[f72333f]	2015	if self._is_2D(): data.dqy_data[data.dqy_data==0] = self.dx_max
	2016	else: data.dx[data.dx==0] = self.dx_max
[f867cd9]	2017	self.current_smearer = smear_selection(data, self.model)
[4fbc93e]	2018	# 2D need to set accuracy
	2019	if self._is_2D():
[d7b7156]	2020	self.current_smearer.set_accuracy(accuracy = \
	2021	self.smear2d_accuracy)
[7609f1a]	2022
[f72333f]	2023	if msg != None:
[90a7bbd]	2024	wx.PostEvent(self._manager.parent, StatusEvent(status = msg ))
[f72333f]	2025	else:
	2026	get_pin_min.SetBackgroundColour("white")
	2027	get_pin_max.SetBackgroundColour("white")
[7609f1a]	2028	## set smearing value whether or not the data contain the smearing info
[6bbeacd4]	2029	self._manager.set_smearer(smearer=self.current_smearer,
[ba1f0b2]	2030	enable2D=self.enable2D,
[6bbeacd4]	2031	qmin=float(self.qmin_x),
	2032	qmax= float(self.qmax_x),
[b29e47e]	2033	uid=self.uid)
[7609f1a]	2034	return msg
	2035
	2036	def update_pinhole_smear(self):
	2037	"""
[5062bbf]	2038	called by kill_focus on pinhole TextCntrl
	2039	to update the changes
	2040
	2041	:return: False when wrong value was entered
	2042
[7609f1a]	2043	"""
	2044	# msg default
	2045	msg = None
	2046	# check if any value is changed
	2047	if self._is_changed_pinhole():
	2048	msg = self._set_pinhole_smear()
	2049	#self._undo.Enable(True)
	2050	self.save_current_state()
	2051
	2052	if msg != None:
	2053	return False
	2054	else:
	2055	return True
	2056
	2057	def onSlitSmear(self, event):
	2058	"""
[5062bbf]	2059	Create a custom slit smear object that will change the way residuals
	2060	are compute when fitting
[7609f1a]	2061	"""
[4470b10]	2062
[6bbeacd4]	2063	#if self.check_invalid_panel():
	2064	# return
[4470b10]	2065
[7609f1a]	2066	if self.model ==None:
[4470b10]	2067	self.disable_smearer.SetValue(True)
	2068
	2069	msg="Please select a Model first..."
	2070	wx.MessageBox(msg, 'Info')
[90a7bbd]	2071	wx.PostEvent(self._manager.parent, StatusEvent(status=\
[7609f1a]	2072	"Smear: %s"%msg))
	2073	return
[4470b10]	2074
[2d409fa]	2075	# Need update param values
	2076	self._update_paramv_on_fit()
[f72333f]	2077
[7609f1a]	2078	# msg default
	2079	msg = None
	2080	# for event given
	2081	if event != None:
	2082	tcrtl= event.GetEventObject()
	2083	# event case of radio button
	2084	if tcrtl.GetValue():
	2085	self.dxl = 0.0
	2086	self.dxw = 0.0
	2087	is_new_slit = True
	2088	else:
	2089	is_new_slit = self._is_changed_slit()
[d493f66]	2090	else:
[1da28b8]	2091	is_new_slit = True
[4470b10]	2092
[7609f1a]	2093	# if any value is changed
	2094	if is_new_slit:
	2095	msg = self._set_slit_smear()
[4470b10]	2096
[7609f1a]	2097	# hide all silt sizer
	2098	self._hide_all_smear_info()
	2099	##Calculate chi2
[f72333f]	2100	#self.compute_chisqr(smearer= self.current_smearer)
[7609f1a]	2101	# show relevant slit sizers
	2102	self._show_smear_sizer()
	2103	self.sizer_set_smearer.Layout()
	2104	self.Layout()
[4470b10]	2105
[7609f1a]	2106	if event != None:
	2107	event.Skip()
	2108	#self._undo.Enable(True)
	2109	self.save_current_state()
	2110	event = PageInfoEvent(page = self)
	2111	wx.PostEvent(self.parent, event)
	2112	if msg != None:
[90a7bbd]	2113	wx.PostEvent(self._manager.parent, StatusEvent(status = msg))
[7609f1a]	2114
	2115	def _is_changed_slit(self):
	2116	"""
[5062bbf]	2117	check if any of slit lengths is changed
	2118
	2119	:return: True or False
[4470b10]	2120
[5062bbf]	2121	"""
[7609f1a]	2122	# get the values
	2123	width = self.smear_slit_width.GetValue()
	2124	height = self.smear_slit_height.GetValue()
	2125
[d7b7156]	2126	# check and change the box bg color if it was pink
	2127	# but it should be white now
[7609f1a]	2128	# because this is the case that _set_slit_smear() will not handle
	2129	if height.lstrip().rstrip()=="":
	2130	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
	2131	if width.lstrip().rstrip()=="":
	2132	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
	2133
	2134	# Check changes in slit width
	2135	if width == "":
	2136	dxw = 0.0
	2137	else:
	2138	try:
	2139	dxw = float(width)
	2140	except:
	2141	return True
	2142	if self.dxw != dxw:
	2143	return True
	2144
	2145	# Check changes in slit heigth
	2146	if height == "":
	2147	dxl = 0.0
	2148	else:
	2149	try:
	2150	dxl = float(height)
	2151	except:
	2152	return True
	2153	if self.dxl != dxl:
	2154	return True
[4470b10]	2155
[7609f1a]	2156	return False
	2157
	2158	def _set_slit_smear(self):
	2159	"""
[5062bbf]	2160	Set custom slit smear
	2161
	2162	:return: message to inform the user about the validity
	2163	of the values entered for slit smear
[7609f1a]	2164	"""
[ba1f0b2]	2165	if self.data.__class__.__name__ == "Data2D" or \
	2166	self.enable2D:
[0b12abb5]	2167	return
[7609f1a]	2168	temp_smearer = None
	2169	# make sure once more if it is smearer
	2170	data = copy.deepcopy(self.data)
	2171	data_len = len(data.x)
	2172	data.dx = None
	2173	data.dxl = None
	2174	data.dxw = None
	2175	msg = None
	2176
	2177	try:
	2178	self.dxl = float(self.smear_slit_height.GetValue())
	2179	data.dxl = self.dxl* numpy.ones(data_len)
	2180	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
	2181	except:
	2182	data.dxl = numpy.zeros(data_len)
	2183	if self.smear_slit_height.GetValue().lstrip().rstrip()!="":
	2184	self.smear_slit_height.SetBackgroundColour("pink")
	2185	msg = "Wrong value entered... "
	2186	else:
	2187	self.smear_slit_height.SetBackgroundColour(wx.WHITE)
	2188	try:
	2189	self.dxw = float(self.smear_slit_width.GetValue())
	2190	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
	2191	data.dxw = self.dxw* numpy.ones(data_len)
	2192	except:
	2193	data.dxw = numpy.zeros(data_len)
	2194	if self.smear_slit_width.GetValue().lstrip().rstrip()!="":
	2195	self.smear_slit_width.SetBackgroundColour("pink")
	2196	msg = "Wrong Fit value entered... "
	2197	else:
	2198	self.smear_slit_width.SetBackgroundColour(wx.WHITE)
[4470b10]	2199
[f867cd9]	2200	self.current_smearer = smear_selection(data, self.model)
[7609f1a]	2201	#temp_smearer = self.current_smearer
	2202	## set smearing value whether or not the data contain the smearing info
[6bbeacd4]	2203	self._manager.set_smearer(smearer=self.current_smearer,
[ba1f0b2]	2204	enable2D=self.enable2D,
[6bbeacd4]	2205	qmin=float(self.qmin_x),
	2206	qmax= float(self.qmax_x),
[512bbd0]	2207	uid=self.uid)
[7609f1a]	2208	return msg
	2209
	2210	def update_slit_smear(self):
	2211	"""
[5062bbf]	2212	called by kill_focus on pinhole TextCntrl
	2213	to update the changes
	2214
	2215	:return: False when wrong value was entered
	2216
[7609f1a]	2217	"""
	2218	# msg default
	2219	msg = None
	2220	# check if any value is changed
	2221	if self._is_changed_slit():
	2222	msg = self._set_slit_smear()
	2223	#self._undo.Enable(True)
	2224	self.save_current_state()
	2225
	2226	if msg != None:
	2227	return False
	2228	else:
	2229	return True
	2230
[c77d859]	2231	def onSmear(self, event):
	2232	"""
[5062bbf]	2233	Create a smear object that will change the way residuals
	2234	are compute when fitting
[c77d859]	2235	"""
[f72333f]	2236	if event != None:
	2237	event.Skip()
[6bbeacd4]	2238	if self.data is None:
[ffa69b6]	2239	return
[6bbeacd4]	2240
[64bda1e]	2241	if self.model == None:
[4470b10]	2242	self.disable_smearer.SetValue(True)
	2243	msg="Please select a Model first..."
	2244	wx.MessageBox(msg, 'Info')
[90a7bbd]	2245	wx.PostEvent(self._manager.parent, StatusEvent(status=\
[2a2af47]	2246	"Smear: %s"%msg))
	2247	return
[f72333f]	2248
[2d409fa]	2249	# Need update param values
	2250	self._update_paramv_on_fit()
[6bbeacd4]	2251
[3370922]	2252	temp_smearer = None
[7609f1a]	2253	self._get_smear_info()
	2254
	2255	#renew smear sizer
	2256	if self.smear_type != None:
	2257	self.smear_description_smear_type.SetValue(str(self.smear_type))
	2258	self.smear_data_left.SetValue(str(self.dq_l))
	2259	self.smear_data_right.SetValue(str(self.dq_r))
[f72333f]	2260
[7609f1a]	2261	self._hide_all_smear_info()
	2262
	2263	data = copy.deepcopy(self.data)
	2264	# make sure once more if it is smearer
[f867cd9]	2265	self.current_smearer = smear_selection(data, self.model)
[f72333f]	2266
[c77d859]	2267	if self.enable_smearer.GetValue():
	2268	if hasattr(self.data,"dxl"):
[7609f1a]	2269
[c77d859]	2270	msg= ": Resolution smearing parameters"
	2271	if hasattr(self.data,"dxw"):
	2272	msg= ": Slit smearing parameters"
[997131a]	2273	if self.smearer ==None:
[90a7bbd]	2274	wx.PostEvent(self._manager.parent, StatusEvent(status=\
[c77d859]	2275	"Data contains no smearing information"))
	2276	else:
[90a7bbd]	2277	wx.PostEvent(self._manager.parent, StatusEvent(status=\
[f72333f]	2278	"Data contains smearing information"))
	2279
	2280	#self.smear_description_dqdata.Show(True)
[7609f1a]	2281	self.smear_data_left.Show(True)
	2282	self.smear_data_right.Show(True)
[f72333f]	2283	temp_smearer= self.current_smearer
[7609f1a]	2284	elif self.disable_smearer.GetValue():
	2285	self.smear_description_none.Show(True)
	2286
	2287	self._show_smear_sizer()
[f72333f]	2288
[7609f1a]	2289	self.sizer_set_smearer.Layout()
	2290	self.Layout()
[fb8daaaf]	2291	## set smearing value whether or not the data contain the smearing info
[ba1f0b2]	2292	self._manager.set_smearer(uid=self.uid, smearer=temp_smearer,
	2293	enable2D=self.enable2D,
	2294	qmin= float(self.qmin_x),
[6bbeacd4]	2295	qmax= float(self.qmax_x), draw=True)
	2296
[5582a9f1]	2297	self.state.enable_smearer= self.enable_smearer.GetValue()
	2298	self.state.disable_smearer=self.disable_smearer.GetValue()
[7609f1a]	2299	self.state.pinhole_smearer = self.pinhole_smearer.GetValue()
	2300	self.state.slit_smearer = self.slit_smearer.GetValue()
[f72333f]	2301
	2302	def on_complete_chisqr(self, event):
	2303	"""
[5062bbf]	2304	print result chisqr
	2305
	2306	:event: activated by fitting/ complete after draw
	2307
[f72333f]	2308	"""
	2309	try:
[06aa2eeb]	2310	if event == None:
	2311	output= "-"
	2312	elif not numpy.isfinite(event.output):
[f72333f]	2313	output= "-"
	2314	else:
	2315	output = event.output
[2296316]	2316	self.tcChi.SetValue(str(format_number(output, True)))
[f72333f]	2317
[3c44c66]	2318	self.state.tcChi = self.tcChi.GetValue()
[f72333f]	2319	except:
	2320	pass
[c77d859]	2321
[5062bbf]	2322
[c77d859]	2323	def select_all_param(self,event):
	2324	"""
[5062bbf]	2325	set to true or false all checkBox given the main checkbox value cb1
[d1e0473]	2326	"""
[c77d859]	2327	self.param_toFit=[]
	2328	if self.parameters !=[]:
[998b6b8]	2329	if self.cb1.GetValue():
[c77d859]	2330	for item in self.parameters:
[3fef0a8]	2331	## for data2D select all to fit
[ba1f0b2]	2332	if self.data.__class__.__name__== "Data2D" or \
	2333	self.enable2D:
[c77d859]	2334	item[0].SetValue(True)
	2335	self.param_toFit.append(item )
[3fef0a8]	2336	else:
	2337	## for 1D all parameters except orientation
	2338	if not item in self.orientation_params:
	2339	item[0].SetValue(True)
	2340	self.param_toFit.append(item )
[b324aa9]	2341	#if len(self.fittable_param)>0:
	2342	for item in self.fittable_param:
[ba1f0b2]	2343	if self.data.__class__.__name__== "Data2D" or \
	2344	self.enable2D:
[b324aa9]	2345	item[0].SetValue(True)
	2346	self.param_toFit.append(item )
[2296316]	2347	try:
	2348	if len(self.values[item[1]]) > 0:
	2349	item[0].SetValue(False)
	2350	except:
	2351	pass
	2352
[b324aa9]	2353	else:
	2354	## for 1D all parameters except orientation
	2355	if not item in self.orientation_params_disp:
[3fef0a8]	2356	item[0].SetValue(True)
	2357	self.param_toFit.append(item )
[2296316]	2358	try:
	2359	if len(self.values[item[1]]) > 0:
	2360	item[0].SetValue(False)
	2361	except:
	2362	pass
	2363
[c77d859]	2364	else:
	2365	for item in self.parameters:
	2366	item[0].SetValue(False)
	2367	for item in self.fittable_param:
	2368	item[0].SetValue(False)
	2369	self.param_toFit=[]
[330573d]	2370
[52cac46]	2371	self.save_current_state_fit()
[b324aa9]	2372
[3595309d]	2373	if event !=None:
[3a37fe0]	2374	#self._undo.Enable(True)
[3595309d]	2375	## post state to fit panel
	2376	event = PageInfoEvent(page = self)
	2377	wx.PostEvent(self.parent, event)
	2378
[c77d859]	2379	def select_param(self,event):
	2380	"""
[5062bbf]	2381	Select TextCtrl checked for fitting purpose and stores them
	2382	in self.param_toFit=[] list
[c77d859]	2383	"""
	2384	self.param_toFit=[]
	2385	for item in self.parameters:
[edd166b]	2386	#Skip t ifhe angle parameters if 1D data
[ba1f0b2]	2387	if self.data.__class__.__name__ != "Data2D" and\
	2388	not self.enable2D:
[edd166b]	2389	if item in self.orientation_params:
	2390	continue
[c77d859]	2391	#Select parameters to fit for list of primary parameters
[998b6b8]	2392	if item[0].GetValue():
[c77d859]	2393	if not (item in self.param_toFit):
	2394	self.param_toFit.append(item )
	2395	else:
	2396	#remove parameters from the fitting list
	2397	if item in self.param_toFit:
	2398	self.param_toFit.remove(item)
[edd166b]	2399
[d7b7156]	2400	#Select parameters to fit for list of fittable parameters
	2401	# with dispersion
[c77d859]	2402	for item in self.fittable_param:
[edd166b]	2403	#Skip t ifhe angle parameters if 1D data
[ba1f0b2]	2404	if self.data.__class__.__name__ != "Data2D" and\
	2405	not self.enable2D:
[edd166b]	2406	if item in self.orientation_params:
	2407	continue
[998b6b8]	2408	if item[0].GetValue():
[c77d859]	2409	if not (item in self.param_toFit):
	2410	self.param_toFit.append(item)
	2411	else:
	2412	#remove parameters from the fitting list
	2413	if item in self.param_toFit:
[edd166b]	2414	self.param_toFit.remove(item)
	2415
	2416	#Calculate num. of angle parameters
[ba1f0b2]	2417	if self.data.__class__.__name__ == "Data2D" or \
	2418	self.enable2D:
[edd166b]	2419	len_orient_para = 0
	2420	else:
	2421	len_orient_para = len(self.orientation_params) #assume even len
	2422	#Total num. of angle parameters
	2423	if len(self.fittable_param) > 0:
	2424	len_orient_para *= 2
[c77d859]	2425	#Set the value of checkbox that selected every checkbox or not
[d7b7156]	2426	if len(self.parameters)+len(self.fittable_param)-len_orient_para ==\
	2427	len(self.param_toFit):
[c77d859]	2428	self.cb1.SetValue(True)
	2429	else:
	2430	self.cb1.SetValue(False)
[52cac46]	2431	self.save_current_state_fit()
[3595309d]	2432	if event !=None:
[3a37fe0]	2433	#self._undo.Enable(True)
[3595309d]	2434	## post state to fit panel
	2435	event = PageInfoEvent(page = self)
	2436	wx.PostEvent(self.parent, event)
[c77d859]	2437
[77e23a2]	2438	def set_model_param_sizer(self, model):
[c77d859]	2439	"""
[5062bbf]	2440	Build the panel from the model content
	2441
	2442	:param model: the model selected in combo box for fitting purpose
	2443
[c77d859]	2444	"""
	2445	self.sizer3.Clear(True)
	2446	self.parameters = []
[fb59ed9]	2447	self.str_parameters = []
[c77d859]	2448	self.param_toFit=[]
	2449	self.fittable_param=[]
	2450	self.fixed_param=[]
[780d095]	2451	self.orientation_params=[]
[60132ef]	2452	self.orientation_params_disp=[]
[c77d859]	2453
	2454	if model ==None:
	2455	self.sizer3.Layout()
[015d109]	2456	self.SetupScrolling()
[c77d859]	2457	return
[707436d]	2458	## the panel is drawn using the current value of the fit engine
[90a7bbd]	2459	if self.engine_type==None and self._manager !=None:
	2460	self.engine_type= self._manager._return_engine_type()
[c99a6c5]	2461
[c77d859]	2462	box_description= wx.StaticBox(self, -1,str("Model Parameters"))
	2463	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
	2464	sizer = wx.GridBagSizer(5,5)
	2465	## save the current model
	2466	self.model = model
	2467
	2468	keys = self.model.getParamList()
	2469	#list of dispersion paramaters
	2470	self.disp_list=self.model.getDispParamList()
[b421b1a]	2471
[db08737]	2472	def custom_compare(a,b):
	2473	"""
	2474	Custom compare to order, first by alphabets then second by number.
	2475	"""
[fb59ed9]	2476	# number at the last digit
[db08737]	2477	a_last = a[len(a)-1]
	2478	b_last = b[len(b)-1]
[fb59ed9]	2479	# default
[db08737]	2480	num_a = None
	2481	num_b = None
[fb59ed9]	2482	# split the names
	2483	a2 = a.lower().split('_')
	2484	b2 = b.lower().split('_')
	2485	# check length of a2, b2
	2486	len_a2 = len(a2)
	2487	len_b2 = len(b2)
[db08737]	2488	# check if it contains a int number(<10)
	2489	try:
	2490	num_a = int(a_last)
	2491	except: pass
	2492	try:
	2493	num_b = int(b_last)
	2494	except: pass
[fb59ed9]	2495	# Put 'scale' near the top; happens
	2496	# when numbered param name exists
	2497	if a == 'scale':
	2498	return -1
[db08737]	2499	# both have a number
	2500	if num_a != None and num_b != None:
[fb59ed9]	2501	if num_a > num_b: return -1
	2502	# same number
[db08737]	2503	elif num_a == num_b:
[fb59ed9]	2504	# different last names
	2505	if a2[len_a2-1] != b2[len_b2-1] and num_a != 0:
	2506	return -cmp(a2[len_a2-1], b2[len_b2-1])
	2507	else:
	2508	return cmp(a, b)
	2509	else: return 1
[db08737]	2510	# one of them has a number
[20905a0]	2511	elif num_a != None: return 1
	2512	elif num_b != None: return -1
[fb59ed9]	2513	# no numbers
[20905a0]	2514	else: return cmp(a.lower(), b.lower())
[fb59ed9]	2515
[20905a0]	2516
[db08737]	2517	keys.sort(custom_compare)
[c77d859]	2518
[6dc9ad8]	2519	iy = 0
[c77d859]	2520	ix = 0
[2f6c260]	2521	select_text = "Select All"
[b324aa9]	2522	self.cb1 = wx.CheckBox(self, -1,str(select_text), (10, 10))
[c77d859]	2523	wx.EVT_CHECKBOX(self, self.cb1.GetId(), self.select_all_param)
[2f6c260]	2524	self.cb1.SetToolTipString("To check/uncheck all the boxes below.")
[ecfcef6]	2525	self.cb1.SetValue(True)
[c77d859]	2526
	2527	sizer.Add(self.cb1,(iy, ix),(1,1),\
[eda428b]	2528	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
[c77d859]	2529	ix +=1
	2530	self.text2_2 = wx.StaticText(self, -1, 'Values')
	2531	sizer.Add(self.text2_2,(iy, ix),(1,1),\
	2532	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	2533	ix +=2
	2534	self.text2_3 = wx.StaticText(self, -1, 'Errors')
	2535	sizer.Add(self.text2_3,(iy, ix),(1,1),\
	2536	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	2537	self.text2_3.Hide()
	2538	ix +=1
	2539	self.text2_min = wx.StaticText(self, -1, 'Min')
	2540	sizer.Add(self.text2_min,(iy, ix),(1,1),\
	2541	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[2296316]	2542	#self.text2_min.Hide()
[c77d859]	2543	ix +=1
	2544	self.text2_max = wx.StaticText(self, -1, 'Max')
	2545	sizer.Add(self.text2_max,(iy, ix),(1,1),\
	2546	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[2296316]	2547	#self.text2_max.Hide()
[6fdfc8f]	2548	ix += 1
	2549	self.text2_4 = wx.StaticText(self, -1, '[Units]')
	2550	sizer.Add(self.text2_4,(iy, ix),(1,1),\
	2551	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	2552	self.text2_4.Hide()
[b421b1a]	2553
[c77d859]	2554	for item in keys:
[d7b7156]	2555	if not item in self.disp_list and not item in \
	2556	self.model.orientation_params:
[b421b1a]	2557
	2558	##prepare a spot to store errors
	2559	if not self.model.details.has_key(item):
	2560	self.model.details [item] = ["",None,None]
	2561
[c77d859]	2562	iy += 1
	2563	ix = 0
[d7b7156]	2564	if self.model.__class__ in \
	2565	self.model_list_box["Multi-Functions"] \
[fb59ed9]	2566	and item in self.model.non_fittable:
	2567	non_fittable_name = wx.StaticText(self, -1, item )
	2568	sizer.Add(non_fittable_name,(iy, ix),(1,1),\
	2569	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 21)
	2570	## add parameter value
	2571	ix += 1
	2572	value= self.model.getParam(item)
	2573	if len(self.model.fun_list) > 0:
	2574	num = item.split('_')[1][5:7]
[d7b7156]	2575	fun_box = wx.ComboBox(self, -1,size=(100,-1),
	2576	style=wx.CB_READONLY, name = '%s'% item)
[fb59ed9]	2577	self._set_fun_box_list(fun_box)
	2578	fun_box.SetSelection(0)
[d7b7156]	2579	#self.fun_box.SetToolTipString("A function
	2580	# describing the interface")
[fb59ed9]	2581	wx.EVT_COMBOBOX(fun_box,-1, self._on_fun_box)
	2582	else:
[d7b7156]	2583	fun_box = self.ModelTextCtrl(self, -1,
	2584	size=(_BOX_WIDTH,20),
	2585	style=wx.TE_PROCESS_ENTER, name ='%s'% item)
[fb59ed9]	2586	fun_box.SetToolTipString("Hit 'Enter' after typing.")
[2296316]	2587	fun_box.SetValue(format_number(value, True))
[fb59ed9]	2588	sizer.Add(fun_box, (iy,ix),(1,1), wx.EXPAND)
[d7b7156]	2589	self.str_parameters.append([None,item, fun_box,
[2296316]	2590	None, None, None,
	2591	None, None])
[fb59ed9]	2592
	2593
[7975f2b]	2594	else:
[fb59ed9]	2595	## add parameters name with checkbox for selecting to fit
	2596	cb = wx.CheckBox(self, -1, item )
[2296316]	2597	cb.SetToolTipString(" Check mark to fit.")
[fb59ed9]	2598	#cb.SetValue(True)
	2599	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
[dcf29d7]	2600
[fb59ed9]	2601	sizer.Add( cb,( iy, ix),(1,1),
	2602	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
	2603
	2604	## add parameter value
	2605	ix += 1
	2606	value= self.model.getParam(item)
	2607	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
	2608	style=wx.TE_PROCESS_ENTER)
	2609	ctl1.SetToolTipString("Hit 'Enter' after typing.")
[2296316]	2610	ctl1.SetValue(format_number(value, True))
[fb59ed9]	2611	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
	2612	## text to show error sign
	2613	ix += 1
	2614	text2=wx.StaticText(self, -1, '+/-')
	2615	sizer.Add(text2,(iy, ix),(1,1),\
	2616	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	2617	text2.Hide()
	2618	ix += 1
[2296316]	2619	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH/1.2,20), style=0)
[d7b7156]	2620	sizer.Add(ctl2, (iy,ix),(1,1),
	2621	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[fb59ed9]	2622	ctl2.Hide()
	2623
	2624	ix += 1
[2296316]	2625	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/1.9,20),
[d7b7156]	2626	style=wx.TE_PROCESS_ENTER,
	2627	text_enter_callback = self._onparamRangeEnter)
[fb59ed9]	2628
[d7b7156]	2629	sizer.Add(ctl3, (iy,ix),(1,1),
	2630	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[fb59ed9]	2631
	2632	ix += 1
[2296316]	2633	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/1.9,20),
[d7b7156]	2634	style=wx.TE_PROCESS_ENTER,
	2635	text_enter_callback = self._onparamRangeEnter)
	2636	sizer.Add(ctl4, (iy,ix),(1,1),
[2296316]	2637	wx.EXPAND\|wx.FIXED_MINSIZE, 0)
[fb59ed9]	2638
	2639	ix +=1
	2640	# Units
	2641	if self.model.details.has_key(item):
[d7b7156]	2642	units = wx.StaticText(self, -1,
	2643	self.model.details[item][0], style=wx.ALIGN_LEFT)
[fb59ed9]	2644	else:
	2645	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
[d7b7156]	2646	sizer.Add(units, (iy,ix),(1,1),
	2647	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[fb59ed9]	2648
	2649	##[cb state, name, value, "+/-", error of fit, min, max , units]
	2650	self.parameters.append([cb,item, ctl1,
	2651	text2,ctl2, ctl3, ctl4,units])
	2652
[c77d859]	2653	iy+=1
[d7b7156]	2654	sizer.Add((10,10),(iy,ix),(1,1),
	2655	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
[5af5183]	2656
[f20767b]	2657	# type can be either Guassian or Array
[5b53a5c]	2658	if len(self.model.dispersion.values())>0:
	2659	type= self.model.dispersion.values()[0]["type"]
	2660	else:
	2661	type = "Gaussian"
[6dc9ad8]	2662
	2663	iy += 1
	2664	ix = 0
	2665	#Add tile for orientational angle
	2666	for item in keys:
	2667	if item in self.model.orientation_params:
	2668	orient_angle = wx.StaticText(self, -1, '[For 2D only]:')
[d7b7156]	2669	sizer.Add(orient_angle,(iy, ix),(1,1),
	2670	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
[ba1f0b2]	2671	if not self.data.__class__.__name__ == "Data2D" and \
	2672	not self.enable2D:
[6dc9ad8]	2673	orient_angle.Hide()
	2674	else:
	2675	orient_angle.Show(True)
	2676	break
[5b53a5c]	2677
[f20767b]	2678	#For Gaussian only
	2679	if type.lower() != "array":
	2680	for item in self.model.orientation_params:
	2681	if not item in self.disp_list:
[c13b8cc]	2682	##prepare a spot to store min max
	2683	if not self.model.details.has_key(item):
	2684	self.model.details [item] = ["",None,None]
	2685
[f20767b]	2686	iy += 1
	2687	ix = 0
	2688	## add parameters name with checkbox for selecting to fit
	2689	cb = wx.CheckBox(self, -1, item )
	2690	cb.SetValue(False)
[2296316]	2691	cb.SetToolTipString("Check mark to fit")
[f20767b]	2692	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
[ba1f0b2]	2693	if self.data.__class__.__name__ == "Data2D" or \
	2694	self.enable2D:
[6dc9ad8]	2695	cb.Show(True)
[f20767b]	2696	else:
[6dc9ad8]	2697	cb.Hide()
[f20767b]	2698	sizer.Add( cb,( iy, ix),(1,1),
	2699	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
	2700
	2701	## add parameter value
	2702	ix += 1
	2703	value= self.model.getParam(item)
[7975f2b]	2704	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
[f20767b]	2705	style=wx.TE_PROCESS_ENTER)
[1a94c36]	2706	ctl1.SetToolTipString("Hit 'Enter' after typing.")
[2296316]	2707	ctl1.SetValue(format_number(value, True))
[ba1f0b2]	2708	if self.data.__class__.__name__ == "Data2D" or \
	2709	self.enable2D:
[c5cd3b9]	2710	ctl1.Show(True)
[f20767b]	2711	else:
[c5cd3b9]	2712	ctl1.Hide()
[f20767b]	2713	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
	2714	## text to show error sign
	2715	ix += 1
	2716	text2=wx.StaticText(self, -1, '+/-')
	2717	sizer.Add(text2,(iy, ix),(1,1),\
	2718	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	2719	text2.Hide()
	2720	ix += 1
[2296316]	2721	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH/1.2,20), style=0)
[d7b7156]	2722	sizer.Add(ctl2, (iy,ix),(1,1),
	2723	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[f20767b]	2724	ctl2.Hide()
[e2f7b92]	2725
[c99a6c5]	2726
[f20767b]	2727	ix += 1
[2296316]	2728	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/1.8,20),
[d7b7156]	2729	style=wx.TE_PROCESS_ENTER,
	2730	text_enter_callback = self._onparamRangeEnter)
[b9405cd]	2731
[d7b7156]	2732	sizer.Add(ctl3, (iy,ix),(1,1),
	2733	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[f20767b]	2734	ctl3.Hide()
[b324aa9]	2735
[f20767b]	2736	ix += 1
[2296316]	2737	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/1.8,20),
[d7b7156]	2738	style=wx.TE_PROCESS_ENTER,
	2739	text_enter_callback = self._onparamRangeEnter)
	2740	sizer.Add(ctl4, (iy,ix),(1,1),
	2741	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[eacf1d66]	2742
[f20767b]	2743	ctl4.Hide()
[edd166b]	2744
[ba1f0b2]	2745	if self.data.__class__.__name__ == "Data2D" or \
	2746	self.enable2D:
[f20767b]	2747	ctl3.Show(True)
	2748	ctl4.Show(True)
[c5cd3b9]	2749
[f20767b]	2750	ix +=1
	2751	# Units
[7975f2b]	2752	if self.model.details.has_key(item):
[d7b7156]	2753	units = wx.StaticText(self, -1,
	2754	self.model.details[item][0],
	2755	style=wx.ALIGN_LEFT)
[7975f2b]	2756	else:
[f20767b]	2757	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
[ba1f0b2]	2758	if self.data.__class__.__name__ == "Data2D" or \
	2759	self.enable2D:
[6dc9ad8]	2760	units.Show(True)
[c99a6c5]	2761
[f20767b]	2762	else:
[6dc9ad8]	2763	units.Hide()
[c99a6c5]	2764
[d7b7156]	2765	sizer.Add(units, (iy,ix),(1,1),
	2766	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[7975f2b]	2767
[d7b7156]	2768	##[cb state, name, value, "+/-", error of fit,min,max,units]
[f20767b]	2769	self.parameters.append([cb,item, ctl1,
	2770	text2,ctl2, ctl3, ctl4,units])
	2771	self.orientation_params.append([cb,item, ctl1,
	2772	text2,ctl2, ctl3, ctl4,units])
[780d095]	2773
	2774	iy+=1
[c77d859]	2775
	2776	#Display units text on panel
	2777	for item in keys:
[7975f2b]	2778	if self.model.details.has_key(item):
[c77d859]	2779	self.text2_4.Show()
[b324aa9]	2780	#Fill the list of fittable parameters
	2781	self.select_all_param(event=None)
[7975f2b]	2782
[52cac46]	2783	self.save_current_state_fit()
[240b9966]	2784	boxsizer1.Add(sizer)
[c77d859]	2785	self.sizer3.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
	2786	self.sizer3.Layout()
[330573d]	2787	self.Layout()
	2788	self.Refresh()
[2296316]	2789
	2790	def on_right_down(self, event):
	2791	"""
	2792	Get key stroke event
	2793	"""
	2794	if self.data == None:
	2795	return
	2796	# Figuring out key combo: Cmd for copy, Alt for paste
	2797	if event.AltDown() and event.ShiftDown():
	2798	self._show_ftol_dialog()
	2799	flag = True
[1b1bbf9]	2800	elif event.AltDown() or event.ShiftDown():
[2296316]	2801	flag = False
[1b1bbf9]	2802	else:
	2803	return
[2296316]	2804	# make event free
	2805	event.Skip()
	2806	# messages depending on the flag
	2807	if not flag:
	2808	msg = " Could not open ftol dialog;"
	2809	msg += " Check if the Scipy fit engine is selected in the menubar."
	2810	infor = 'warning'
	2811	# inform msg to wx
	2812	wx.PostEvent( self.parent.parent,
	2813	StatusEvent(status= msg, info=infor))
	2814
	2815
	2816	def _show_ftol_dialog(self):
	2817	"""
	2818	Dialog to select ftol for Scipy
	2819	"""
	2820	from ftol_dialog import ChangeFtol
	2821	panel = ChangeFtol(self)
	2822	panel.ShowModal()
	2823
[8b6f489]	2824	def _onModel2D(self, event):
	2825	"""
	2826	toggle view of model from 1D to 2D or 2D from 1D
	2827	"""
[e2f0554]	2828	if self.model_view.GetLabelText() == "Switch to 2D":
	2829	self.model_view.SetLabel("Switch to 1D")
[8b6f489]	2830	self.enable2D = True
[ba1f0b2]	2831
[8b6f489]	2832	else:
[e2f0554]	2833	self.model_view.SetLabel("Switch to 2D")
[8b6f489]	2834	self.enable2D = False
[52cac46]	2835
[ba1f0b2]	2836	self.set_model_param_sizer(self.model)
	2837	self._set_sizer_dispersion()
	2838	self._draw_model()
	2839
	2840
	2841	self.state.enable2D = copy.deepcopy(self.enable2D)
	2842
[7609f1a]	2843	class BGTextCtrl(wx.TextCtrl):
	2844	"""
[5062bbf]	2845	Text control used to display outputs.
	2846	No editing allowed. The background is
	2847	grayed out. User can't select text.
[7609f1a]	2848	"""
	2849	def __init__(self, args, *kwds):
	2850	wx.TextCtrl.__init__(self, args, *kwds)
	2851	self.SetEditable(False)
[59b8c74]	2852	self.SetBackgroundColour(self.GetParent().parent.GetBackgroundColour())
[7609f1a]	2853
	2854	# Bind to mouse event to avoid text highlighting
	2855	# The event will be skipped once the call-back
	2856	# is called.
	2857	self.Bind(wx.EVT_MOUSE_EVENTS, self._click)
	2858
	2859	def _click(self, event):
	2860	"""
[5062bbf]	2861	Prevent further handling of the mouse event
	2862	by not calling Skip().
[7609f1a]	2863	"""
	2864	pass
[5062bbf]	2865

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/sansview/perspectives/fitting/fitpage.py @ 716da5e

Download in other formats: