fitpage.py @ 6e0e2d85

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2release_4.0.1ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 6e0e2d85 was 66c488b, checked in by Jae Cho <jhjcho@…>, 15 years ago
Corrected autoupdate of plots after qrange changed
Property mode set to `100644`
File size: 65.2 KB

Rev	Line
[d1e0473]	1
	2
[c77d859]	3	import sys
	4	import wx
	5	import wx.lib.newevent
	6	import numpy
	7	import copy
	8	import math
[7975f2b]	9	import time
[c77d859]	10	from sans.models.dispersion_models import ArrayDispersion, GaussianDispersion
	11
	12	from sans.guicomm.events import StatusEvent
[85b3971]	13	from sans.guiframe.utils import format_number,check_float
[7975f2b]	14
[b787e68c]	15	## event to post model to fit to fitting plugins
[c77d859]	16	(ModelEventbox, EVT_MODEL_BOX) = wx.lib.newevent.NewEvent()
[b787e68c]	17
	18	## event to know the selected fit engine
[77e23a2]	19	(FitterTypeEvent, EVT_FITTER_TYPE) = wx.lib.newevent.NewEvent()
[34a0c17]	20	(FitStopEvent, EVT_FIT_STOP) = wx.lib.newevent.NewEvent()
[eda428b]	21	_BOX_WIDTH = 76
[c77d859]	22
	23	import basepage
	24	from basepage import BasicPage
[b787e68c]	25	from basepage import PageInfoEvent
[997131a]	26	from DataLoader.qsmearing import smear_selection
[c77d859]	27
	28	class FitPage(BasicPage):
	29	"""
	30	FitPanel class contains fields allowing to display results when
	31	fitting a model and one data
	32	@note: For Fit to be performed the user should check at least one parameter
	33	on fit Panel window.
	34
	35	"""
[7975f2b]	36
[cfc0913]	37	def __init__(self,parent, page_info):
	38	BasicPage.__init__(self, parent, page_info)
[7975f2b]	39
[c77d859]	40	"""
	41	Initialization of the Panel
	42	"""
	43	## fit page does not content npts txtcrtl
	44	self.npts=None
[2b63df0]	45	## thread for compute Chisqr
	46	self.calc_Chisqr=None
[dcf29d7]	47	## default fitengine type
[707436d]	48	self.engine_type = None
[edd166b]	49
[b787e68c]	50	## draw sizer
[c77d859]	51	self._fill_datainfo_sizer()
[da26c1a]	52
[c77d859]	53	self._fill_model_sizer( self.sizer1)
[7ad6ff5]	54
[cfc0913]	55	self._fill_range_sizer()
[fbf4bf8]	56	#self._on_select_model(event=None)
[997131a]	57	if self.data !=None:
	58	self.smearer = smear_selection( self.data )
[847091f]	59	if self.smearer ==None:
	60	self.enable_smearer.Disable()
	61	self.disable_smearer.Disable()
[edd166b]	62	self.disp_cb_dict = {}
[cfc0913]	63	## to update the panel according to the fit engine type selected
[77e23a2]	64	self.Bind(EVT_FITTER_TYPE,self._on_engine_change)
[34a0c17]	65	self.Bind(EVT_FIT_STOP,self._on_fit_complete)
[c69b6d5]	66
[34a0c17]	67	def _on_fit_complete(self, event):
	68	"""
	69	When fit is complete ,reset the fit button label.
	70	"""
	71	#self.btFit.SetLabel("Fit")
	72	#self.btFit.Unbind(event=wx.EVT_BUTTON, id=self.btFit.GetId())
	73	#self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._onFit,id=self.btFit.GetId())
	74	pass
	75
	76
[77e23a2]	77	def _on_engine_change(self, event):
	78	"""
	79	get an event containing the current name of the fit engine type
	80	@param event: FitterTypeEvent containing the name of the current engine
	81	"""
[dcf29d7]	82	self.engine_type = event.type
[77e23a2]	83	if len(self.parameters)==0:
[edd166b]	84	self.Layout()
[77e23a2]	85	return
[ad6dd4c]	86	if event.type =="park":
	87	self.btFit.SetLabel("Fit")
[6d91073]	88
[77e23a2]	89	for item in self.parameters:
[920a6e5]	90	if event.type =="scipy" :
[60132ef]	91	item[5].SetValue("")
[77e23a2]	92	item[5].Hide()
[60132ef]	93	item[6].SetValue("")
[77e23a2]	94	item[6].Hide()
	95	self.text2_min.Hide()
	96	self.text2_max.Hide()
[7975f2b]	97
[77e23a2]	98	else:
	99	item[5].Show(True)
	100	item[6].Show(True)
	101	self.text2_min.Show(True)
	102	self.text2_max.Show(True)
[920a6e5]	103	for item in self.fittable_param:
	104	if item[5]!=None and item[6]!=None and not item in self.orientation_params_disp:
	105	if event.type =="scipy" and not item in self.orientation_params:
[c5cd3b9]	106	item[5].SetValue("")
	107	item[5].Hide()
	108	item[6].SetValue("")
	109	item[6].Hide()
	110	self.text2_min.Hide()
	111	self.text2_max.Hide()
[920a6e5]	112	self.text_disp_min.Hide()
	113	self.text_disp_max.Hide()
[c5cd3b9]	114	else:
	115	item[5].Show(True)
	116	item[6].Show(True)
	117	self.text2_min.Show(True)
	118	self.text2_max.Show(True)
[920a6e5]	119	self.text_disp_min.Show(True)
	120	self.text_disp_max.Show(True)
[c5cd3b9]	121
[920a6e5]	122	for item in self.orientation_params:
[c5cd3b9]	123	if item[5]!=None and item[6]!=None:
	124	if event.type =="scipy" or self.data.__class__.__name__ !="Data2D":
	125	item[5].SetValue("")
	126	item[5].Hide()
	127	item[6].SetValue("")
	128	item[6].Hide()
	129	else:
	130	item[5].Show(True)
	131	item[6].Show(True)
[920a6e5]	132
	133	for item in self.orientation_params_disp:
	134	if item[5]!=None and item[6]!=None:
	135	if event.type =="scipy" or self.data.__class__.__name__ !="Data2D":
	136	item[5].SetValue("")
	137	item[5].Hide()
	138	item[6].SetValue("")
	139	item[6].Hide()
	140	else:
	141	item[5].Show(True)
	142	item[6].Show(True)
[6d91073]	143	self.Layout()
[7975f2b]	144	self.Refresh()
	145
[c77d859]	146	def _fill_range_sizer(self):
	147	"""
	148	Fill the sizer containing the plotting range
	149	add access to npts
	150	"""
[ff8f99b]	151	title = "Fitting"
	152	box_description_range = wx.StaticBox(self, -1,str(title))
	153	boxsizer_range = wx.StaticBoxSizer(box_description_range, wx.VERTICAL)
	154
[1ae3fe1]	155	sizer_fit = wx.GridSizer(1, 1,0, 0)
[c77d859]	156
[e3a76c8]	157	self.btFit = wx.Button(self,wx.NewId(),'Fit', size=(80,23))
[c77d859]	158	self.btFit.Bind(wx.EVT_BUTTON, self._onFit,id= self.btFit.GetId())
	159	self.btFit.SetToolTipString("Perform fit.")
[2d5f7a1]	160
[c77d859]	161
	162	sizer_fit.Add((5,5),1, wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
[9170547]	163	sizer_fit.Add(self.btFit,0, wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 35)
[ff8f99b]	164	sizer_fit.Layout()
[c77d859]	165	sizer_smearer = wx.BoxSizer(wx.HORIZONTAL)
	166	#Filling the sizer containing instruments smearing info.
	167	self.disable_smearer = wx.RadioButton(self, -1, 'No', style=wx.RB_GROUP)
	168	self.enable_smearer = wx.RadioButton(self, -1, 'Yes')
	169	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.disable_smearer.GetId())
	170	self.Bind(wx.EVT_RADIOBUTTON, self.onSmear, id=self.enable_smearer.GetId())
[ff8f99b]	171	self.disable_smearer.SetValue(True)
[c77d859]	172
	173	sizer_smearer.Add(wx.StaticText(self,-1,'Instrument Smearing? '))
	174	sizer_smearer.Add((10, 10))
	175	sizer_smearer.Add( self.enable_smearer )
	176	sizer_smearer.Add((10,10))
	177	sizer_smearer.Add( self.disable_smearer )
[7b0fd65]	178	#Display Chi^2/dof
[e3a76c8]	179	sizer_smearer.Add((78,10))
[7b0fd65]	180	box_description= wx.StaticBox(self, -1,'Chi2/dof')
	181	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
[9170547]	182	boxsizer1.SetMinSize((80,-1))
[2b63df0]	183	temp_smearer = None
	184	if self.enable_smearer.GetValue():
	185	temp_smearer= self.smearer
	186
	187	self.tcChi = wx.StaticText(self, -1, "-", style=wx.ALIGN_LEFT)
	188
[7b0fd65]	189	boxsizer1.Add( self.tcChi )
	190	sizer_smearer.Add( boxsizer1 )
	191
	192	#Set sizer for Fitting section
[ff8f99b]	193	self._set_range_sizer( title=title,box_sizer=boxsizer_range, object1=sizer_smearer, object= sizer_fit)
[7975f2b]	194
[c77d859]	195	def _fill_datainfo_sizer(self):
	196	"""
	197	fill sizer 0 with data info
	198	"""
	199	self.sizer0.Clear(True)
	200	## no loaded data , don't fill the sizer
	201	if self.data== None:
	202	self.sizer0.Layout()
	203	return
	204
[fa58441]	205	box_description= wx.StaticBox(self, -1, 'Data')
[c77d859]	206	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
	207	#----------------------------------------------------------
	208	sizer_data = wx.GridSizer(3, 3,5, 5)
	209	#Filling the sizer containing data related fields
	210	DataSource =wx.StaticText(self, -1,str(self.data.name))
	211
[fa58441]	212	sizer_data.Add(wx.StaticText(self, -1, 'Source Name : '))
[c77d859]	213	sizer_data.Add(DataSource )
[2a5bba7]	214	sizer_data.Add( (0,5) )
[c77d859]	215
	216	#---------sizer 2 draw--------------------------------
	217	#set maximum range for x in linear scale
	218	if not hasattr(self.data,"data"): #Display only for 1D data fit
	219	# Minimum value of data
[813334e]	220	data_min = min(self.data.x)
[c77d859]	221	# Maximum value of data
[813334e]	222	data_max = max(self.data.x)
[7b0fd65]	223	text4_3 = wx.StaticText(self, -1, 'Total Q Range (1/A)',
[c77d859]	224	style=wx.ALIGN_LEFT)
	225	sizer_data.Add( text4_3 )
[813334e]	226	sizer_data.Add(wx.StaticText(self, -1, "Min : %s"%str(data_min)))
	227	sizer_data.Add(wx.StaticText(self, -1, "Max : %s"%str(data_max)))
[c77d859]	228
	229	else:
[813334e]	230	## Minimum value of data
	231	data_min= 0
	232	x= max(math.fabs(self.data.xmin), math.fabs(self.data.xmax))
	233	y= max(math.fabs(self.data.ymin), math.fabs(self.data.ymax))
	234	## Maximum value of data
	235	data_max = math.sqrt(xx + yy)
	236
[d2d0cfdf]	237	#For qmin and qmax, do not use format_number
	238	#.(If do, qmin and max could be different from what is in the data.)
[d1e0473]	239	text4_3 = wx.StaticText(self, -1, "Total Q Range (1/A)",
[c77d859]	240	style=wx.ALIGN_LEFT)
	241	sizer_data.Add( text4_3 )
[813334e]	242	sizer_data.Add(wx.StaticText(self, -1, "Min : %s"%str(data_min)))
	243	sizer_data.Add(wx.StaticText(self, -1, "Max : %s"%str(data_max)))
	244	## set q range to plot
	245	self.qmin_x= data_min
	246	self.qmax_x= data_max
	247
[c77d859]	248	boxsizer1.Add(sizer_data)
	249	#------------------------------------------------------------
	250	self.sizer0.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
	251	self.sizer0.Layout()
[813334e]	252
[c77d859]	253	def _fill_model_sizer(self, sizer):
	254	"""
	255	fill sizer containing model info
	256	"""
[7ad6ff5]	257	##Add model function Details button in fitpanel.
[ff8f99b]	258	##The following 3 lines are for Mac. Let JHC know before modifying...
	259	title = "Model"
	260	box_description= wx.StaticBox(self, -1,str(title))
	261	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
	262
[7ad6ff5]	263	id = wx.NewId()
[e3a76c8]	264	self.model_help =wx.Button(self,id,'Details', size=(80,23))
[7ad6ff5]	265	self.model_help.Bind(wx.EVT_BUTTON, self.on_model_help_clicked,id=id)
	266	self.model_help.SetToolTipString("Model Function Help")
[7b0fd65]	267
[7ad6ff5]	268	## class base method to add view 2d button
[ff8f99b]	269	self._set_model_sizer(sizer=sizer, box_sizer=boxsizer1, title="Model",object=self.model_help )
[7ad6ff5]	270
[c77d859]	271
[30d103a]	272	def _set_sizer_dispersion(self, dispersity):
[c77d859]	273	"""
	274	draw sizer with gaussian dispersity parameters
	275	"""
	276	self.fittable_param=[]
	277	self.fixed_param=[]
[60132ef]	278	self.orientation_params_disp=[]
[920a6e5]	279
[c77d859]	280	self.sizer4_4.Clear(True)
	281	if self.model==None:
	282	##no model is selected
	283	return
	284	if not self.enable_disp.GetValue():
	285	## the user didn't select dispersity display
	286	return
[b421b1a]	287
[376916c]	288	self._reset_dispersity()
[b421b1a]	289
[376916c]	290	# Create the dispersion objects
	291	for item in self.model.dispersion.keys():
[30d103a]	292	#disp_model = GaussianDispersion()
	293	disp_model = dispersity()
[376916c]	294	self._disp_obj_dict[item] = disp_model
	295	self.model.set_dispersion(item, disp_model)
[c477b31]	296	self.state._disp_obj_dict[item]= disp_model
[376916c]	297
[b421b1a]	298
[c77d859]	299	ix=0
	300	iy=1
	301	disp = wx.StaticText(self, -1, 'Names')
	302	self.sizer4_4.Add(disp,( iy, ix),(1,1),
	303	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
	304	ix += 1
[a720d1f]	305	values = wx.StaticText(self, -1, 'Sigmas (STD)')
[c77d859]	306	self.sizer4_4.Add(values,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	307	ix +=2
[920a6e5]	308	self.text_disp_1 = wx.StaticText(self, -1, '')
[c77d859]	309	self.sizer4_4.Add( self.text_disp_1,(iy, ix),(1,1),\
	310	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	311	self.text_disp_1.Hide()
[920a6e5]	312
	313
	314	ix +=1
	315	self.text_disp_min = wx.StaticText(self, -1, 'Min')
	316	self.sizer4_4.Add(self.text_disp_min,(iy, ix),(1,1),\
	317	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	318	self.text_disp_min.Hide()
	319	ix +=1
	320	self.text_disp_max = wx.StaticText(self, -1, 'Max')
	321	self.sizer4_4.Add(self.text_disp_max,(iy, ix),(1,1),\
	322	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	323	self.text_disp_max.Hide()
	324
	325
[c77d859]	326	ix += 1
	327	npts = wx.StaticText(self, -1, 'Npts')
	328	self.sizer4_4.Add(npts,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	329	ix += 1
	330	nsigmas = wx.StaticText(self, -1, 'Nsigmas')
	331	self.sizer4_4.Add(nsigmas,( iy, ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[920a6e5]	332
	333	if self.engine_type=="park":
	334	self.text_disp_max.Show(True)
	335	self.text_disp_min.Show(True)
[6dc9ad8]	336
[c77d859]	337	for item in self.model.dispersion.keys():
[780d095]	338	if not item in self.model.orientation_params:
[edd166b]	339	if not self.disp_cb_dict.has_key(item):
	340	self.disp_cb_dict[item]= None
[780d095]	341	name1=item+".width"
	342	name2=item+".npts"
	343	name3=item+".nsigmas"
[c99a6c5]	344	if not self.model.details.has_key(name1):
[b421b1a]	345	self.model.details [name1] = ["",None,None]
[c99a6c5]	346
[780d095]	347	iy += 1
	348	for p in self.model.dispersion[item].keys():
	349
	350	if p=="width":
	351	ix = 0
	352	cb = wx.CheckBox(self, -1, name1, (10, 10))
	353	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
	354	self.sizer4_4.Add( cb,( iy, ix),(1,1),
	355	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
	356	ix = 1
	357	value= self.model.getParam(name1)
[7975f2b]	358	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
[c77d859]	359	style=wx.TE_PROCESS_ENTER)
[780d095]	360	ctl1.SetValue(str (format_number(value)))
	361	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
	362	## text to show error sign
	363	ix = 2
	364	text2=wx.StaticText(self, -1, '+/-')
	365	self.sizer4_4.Add(text2,(iy, ix),(1,1),
	366	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	367	text2.Hide()
[b421b1a]	368
[780d095]	369	ix = 3
[c13b8cc]	370	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
[eacf1d66]	371
[780d095]	372	self.sizer4_4.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[eacf1d66]	373
[b421b1a]	374	ctl2.Hide()
[eacf1d66]	375
[920a6e5]	376	ix = 4
[7975f2b]	377	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[e2f7b92]	378	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	379	text_enter_callback = self._onparamRangeEnter)
[eacf1d66]	380
[920a6e5]	381	self.sizer4_4.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	382	ctl3.Hide()
	383
	384	ix = 5
[7975f2b]	385	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[e2f7b92]	386	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	387	text_enter_callback = self._onparamRangeEnter)
[920a6e5]	388	self.sizer4_4.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[eacf1d66]	389
[920a6e5]	390	ctl4.Hide()
	391
	392	if self.engine_type=="park":
	393	ctl3.Show(True)
	394	ctl4.Show(True)
	395
[780d095]	396	self.fittable_param.append([cb,name1,ctl1,text2,
[c99a6c5]	397	ctl2, ctl3, ctl4,None])
[920a6e5]	398
[780d095]	399	elif p=="npts":
[920a6e5]	400	ix = 6
[780d095]	401	value= self.model.getParam(name2)
[7975f2b]	402	Tctl = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
[780d095]	403	style=wx.TE_PROCESS_ENTER)
	404
	405	Tctl.SetValue(str (format_number(value)))
	406	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
	407	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	408	self.fixed_param.append([None,name2, Tctl,None,None,
	409	None, None,None])
	410	elif p=="nsigmas":
[920a6e5]	411	ix = 7
[780d095]	412	value= self.model.getParam(name3)
[7975f2b]	413	Tct2 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
[780d095]	414	style=wx.TE_PROCESS_ENTER)
[c985bef]	415	Tct2.SetValue(str (format_number(value)))
	416	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
[780d095]	417	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	418	ix +=1
	419	self.sizer4_4.Add((20,20), (iy,ix),(1,1),
	420	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	421
[c985bef]	422	self.fixed_param.append([None,name3, Tct2
[920a6e5]	423	,None,None,None, None,None])
	424
[780d095]	425	ix =0
	426	iy +=1
	427	self.sizer4_4.Add((20,20),(iy,ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
	428	for item in self.model.dispersion.keys():
	429	if item in self.model.orientation_params:
[edd166b]	430	if not self.disp_cb_dict.has_key(item):
	431	self.disp_cb_dict[item]= None
[780d095]	432	name1=item+".width"
	433	name2=item+".npts"
	434	name3=item+".nsigmas"
[c99a6c5]	435	if not self.model.details.has_key(name1):
[b421b1a]	436	self.model.details [name1] = ["",None,None]
	437
	438
[780d095]	439	iy += 1
	440	for p in self.model.dispersion[item].keys():
	441
	442	if p=="width":
	443	ix = 0
	444	cb = wx.CheckBox(self, -1, name1, (10, 10))
	445	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
	446	self.sizer4_4.Add( cb,( iy, ix),(1,1),
	447	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
	448	if self.data.__class__.__name__ =="Data2D":
[6dc9ad8]	449	cb.Show(True)
[c99a6c5]	450	elif cb.IsShown():
[6dc9ad8]	451	cb.Hide()
[780d095]	452	ix = 1
	453	value= self.model.getParam(name1)
[7975f2b]	454	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
[c77d859]	455	style=wx.TE_PROCESS_ENTER)
[780d095]	456	ctl1.SetValue(str (format_number(value)))
	457	if self.data.__class__.__name__ =="Data2D":
[6dc9ad8]	458	ctl1.Show(True)
[c99a6c5]	459	elif ctl1.IsShown():
[6dc9ad8]	460	ctl1.Hide()
[780d095]	461	self.sizer4_4.Add(ctl1, (iy,ix),(1,1),wx.EXPAND)
	462	## text to show error sign
	463	ix = 2
	464	text2=wx.StaticText(self, -1, '+/-')
	465	self.sizer4_4.Add(text2,(iy, ix),(1,1),
	466	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	467	text2.Hide()
[b421b1a]	468
[780d095]	469	ix = 3
[c13b8cc]	470	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
[b421b1a]	471
[780d095]	472	self.sizer4_4.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[b421b1a]	473	ctl2.Hide()
[920a6e5]	474
	475	ix = 4
[7975f2b]	476	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[920a6e5]	477	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	478	text_enter_callback = self._onparamRangeEnter)
[eacf1d66]	479
[920a6e5]	480	self.sizer4_4.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[c99a6c5]	481
[920a6e5]	482	ctl3.Hide()
	483
	484	ix = 5
[7975f2b]	485	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[920a6e5]	486	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	487	text_enter_callback = self._onparamRangeEnter)
[920a6e5]	488	self.sizer4_4.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	489	ctl4.Hide()
[c99a6c5]	490	#if self.data.__class__.__name__ =="Data2D":
	491	#ctl4.Enable(True)
	492	#elif ctl4.Shown():
	493	#ctl4.Hide()
[920a6e5]	494
	495	if self.engine_type=="park" and self.data.__class__.__name__ =="Data2D":
	496	ctl3.Show(True)
[c99a6c5]	497	ctl4.Show(True)
[920a6e5]	498
	499
	500
	501
[780d095]	502	self.fittable_param.append([cb,name1,ctl1,text2,
[920a6e5]	503	ctl2, ctl3, ctl4,None])
[60132ef]	504	self.orientation_params_disp.append([cb,name1,ctl1,text2,
[920a6e5]	505	ctl2, ctl3, ctl4,None])
[780d095]	506	elif p=="npts":
[920a6e5]	507	ix = 6
[780d095]	508	value= self.model.getParam(name2)
[7975f2b]	509	Tctl = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
[780d095]	510	style=wx.TE_PROCESS_ENTER)
	511
	512	Tctl.SetValue(str (format_number(value)))
	513	if self.data.__class__.__name__ =="Data2D":
[6dc9ad8]	514	Tctl.Show(True)
[780d095]	515	else:
[6dc9ad8]	516	Tctl.Hide()
[780d095]	517	self.sizer4_4.Add(Tctl, (iy,ix),(1,1),
	518	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	519	self.fixed_param.append([None,name2, Tctl,None,None,
	520	None, None,None])
[60132ef]	521	self.orientation_params_disp.append([None,name2, Tctl,None,None,
[780d095]	522	None, None,None])
	523	elif p=="nsigmas":
[920a6e5]	524	ix = 7
[780d095]	525	value= self.model.getParam(name3)
[7975f2b]	526	Tct2 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20),
[780d095]	527	style=wx.TE_PROCESS_ENTER)
[c985bef]	528	Tct2.SetValue(str (format_number(value)))
[780d095]	529	if self.data.__class__.__name__ =="Data2D":
[c985bef]	530	Tct2.Show(True)
[780d095]	531	else:
[c985bef]	532	Tct2.Hide()
	533	self.sizer4_4.Add(Tct2, (iy,ix),(1,1),
[780d095]	534	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	535	ix +=1
[7975f2b]	536
[c985bef]	537	self.fixed_param.append([None,name3, Tct2
[780d095]	538	,None,None, None, None,None])
[920a6e5]	539
[c985bef]	540	self.orientation_params_disp.append([None,name3, Tct2
[1c1436d]	541	,None,None, None, None,None])
[edd166b]	542	"""
[c99a6c5]	543	#Display units text on panel
[b421b1a]	544	for item in self.model.dispersion.keys():
	545	name = item +".width"
[edd166b]	546	"""
[b421b1a]	547	self.state.disp_cb_dict = copy.deepcopy(self.disp_cb_dict)
	548
[71f0373]	549	self.state.model = self.model.clone()
[240b9966]	550	## save state into
[4043c96]	551	self.state.cb1 = self.cb1.GetValue()
[920a6e5]	552	self._copy_parameters_state(self.parameters, self.state.parameters)
[240b9966]	553	self._copy_parameters_state(self.orientation_params_disp,
	554	self.state.orientation_params_disp)
	555	self._copy_parameters_state(self.fittable_param, self.state.fittable_param)
	556	self._copy_parameters_state(self.fixed_param, self.state.fixed_param)
[d40a9cd]	557
	558
[c77d859]	559	wx.PostEvent(self.parent, StatusEvent(status=\
	560	" Selected Distribution: Gaussian"))
[c13b8cc]	561	ix =0
[c77d859]	562	iy +=1
[7975f2b]	563
[71f0373]	564	self.Layout()
[7975f2b]	565
	566
[c77d859]	567	def _onFit(self, event):
	568	"""
	569	Allow to fit
	570	"""
[c13b8cc]	571	#make sure all parameter values are updated.
[7975f2b]	572
[85b3971]	573	flag = self._update_paramv_on_fit()
[acd0bda3]	574
[c77d859]	575	if not flag:
	576	msg= "Fitting range invalid"
	577	wx.PostEvent(self.parent.parent, StatusEvent(status= msg ))
	578	return
	579
	580	if len(self.param_toFit) <= 0:
	581	msg= "Select at least one parameter to fit"
	582	wx.PostEvent(self.parent.parent, StatusEvent(status= msg ))
	583	return
[7975f2b]	584
	585
	586	self.select_param(event =None)
[acd0bda3]	587
[c99a6c5]	588	#Clear errors if exist from previous fitting
[edd166b]	589	#self._clear_Err_on_Fit()
[d0ce2c30]	590
[c13b8cc]	591	# Remove or do not allow fitting on the Q=0 point, especially when y(q=0)=None at x[0].
[1c1436d]	592	self.qmin_x = float(self.qmin.GetValue())
[c13b8cc]	593	self.qmax_x = float( self.qmax.GetValue())
[6f023e8]	594	self.manager._reset_schedule_problem( value=0)
[ca7a626]	595	self.manager.schedule_for_fit( value=1,page=self,fitproblem =None)
	596	self.manager.set_fit_range(page= self,qmin= self.qmin_x, qmax= self.qmax_x)
[ad6dd4c]	597
[c77d859]	598	#single fit
[ca7a626]	599	self.manager.onFit()
[ad6dd4c]	600	## allow stopping the fit
[34a0c17]	601	#if self.engine_type=="scipy":
	602	# self.btFit.SetLabel("Stop")
	603	# self.btFit.Unbind(event=wx.EVT_BUTTON, id= self.btFit.GetId())
	604	# self.btFit.Bind(event= wx.EVT_BUTTON, handler=self._StopFit, id=self.btFit.GetId())
	605	#else:
	606	# self.btFit.SetLabel("Fit")
	607	# self.btFit.Bind(event= wx.EVT_BUTTON, handler=self._onFit, id=self.btFit.GetId())
[7975f2b]	608
[5f9a6b1]	609
[c77d859]	610
[ad6dd4c]	611	def _StopFit(self, event):
	612	"""
	613	Stop fit
	614	"""
	615	self.btFit.SetLabel("Fit")
	616	if self.engine_type=="scipy":
	617	self.manager.stop_fit()
[34a0c17]	618	self.btFit.Unbind(event=wx.EVT_BUTTON, id=self.btFit.GetId())
	619	self.btFit.Bind(event=wx.EVT_BUTTON, handler=self._onFit,id=self.btFit.GetId())
[7975f2b]	620
[ad6dd4c]	621
[c77d859]	622	def _on_select_model(self, event):
	623	"""
	624	call back for model selection
	625	"""
[59a7f2d]	626	self._on_select_model_helper()
[70c57ebf]	627	self.set_model_param_sizer(self.model)
[b421b1a]	628
[3b605bb]	629	self.enable_disp.SetValue(False)
	630	self.disable_disp.SetValue(True)
[4043c96]	631	try:
	632	self.set_dispers_sizer()
	633	except:
	634	pass
[70c57ebf]	635	if self.model !=None:
	636	try:
	637	temp_smear= None
	638	if self.enable_smearer.GetValue():
	639	temp_smear= self.smearer
	640	self.compute_chisqr(temp_smear)
	641	except:
	642	## error occured on chisqr computation
	643	pass
[2a2af47]	644	## set smearing value whether or not the data contain the smearing info
	645	self.manager.set_smearer(smearer=temp_smear, qmin= float(self.qmin_x),
	646	qmax= float(self.qmax_x))
[70c57ebf]	647	evt = ModelEventbox(model=self.model)
[c99a6c5]	648	wx.PostEvent(self.event_owner, evt)
[4043c96]	649
[848a2ef]	650	self.btFit.SetFocus()
[240b9966]	651	self.state.enable_disp = self.enable_disp.GetValue()
	652	self.state.disable_disp = self.disable_disp.GetValue()
[4043c96]	653
[3b9e023]	654	self.state.structurecombobox = self.structurebox.GetCurrentSelection()
	655	self.state.formfactorcombobox = self.formfactorbox.GetCurrentSelection()
[077809c]	656
[3b9e023]	657
[3595309d]	658	if event !=None:
[3a37fe0]	659	#self._undo.Enable(True)
[3595309d]	660	## post state to fit panel
	661	event = PageInfoEvent(page = self)
	662	wx.PostEvent(self.parent, event)
[330573d]	663
[e2f7b92]	664
[dd5949d]	665	def _onparamEnter(self,event):
	666	"""
	667	when enter value on panel redraw model according to changed
	668	"""
[7975f2b]	669	flag = False
[69bee6d]	670	tcrtl= event.GetEventObject()
[7975f2b]	671
[edd166b]	672	#Clear msg if previously shown.
	673	msg= ""
	674	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
[c99a6c5]	675
[7975f2b]	676	if check_float(tcrtl):
	677	flag = self._onparamEnter_helper()
	678	if flag:
	679	temp_smearer = None
	680	if self.enable_smearer.GetValue():
	681	temp_smearer= self.smearer
	682	self.compute_chisqr(smearer= temp_smearer)
	683
	684	## new state posted
	685	if self.state_change:
	686	#self._undo.Enable(True)
	687	event = PageInfoEvent(page = self)
	688	wx.PostEvent(self.parent, event)
[77f6a8b]	689	self.state_change= False
[7975f2b]	690	self.save_current_state()
[69bee6d]	691	else:
[7975f2b]	692	self.save_current_state()
[69bee6d]	693	msg= "Cannot Plot :Must enter a number!!! "
	694	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	695	return
[cfc0913]	696
[e2f7b92]	697
	698	def _onparamRangeEnter(self, event):
[920a6e5]	699	"""
	700	Check validity of value enter in the parameters range field
	701	"""
[edd166b]	702
[920a6e5]	703	tcrtl= event.GetEventObject()
[edd166b]	704	#Clear msg if previously shown.
	705	msg= ""
	706	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	707	# Flag to register when a parameter has changed.
	708	is_modified = False
[920a6e5]	709	if tcrtl.GetValue().lstrip().rstrip()!="":
	710	try:
	711	value = float(tcrtl.GetValue())
	712	tcrtl.SetBackgroundColour(wx.WHITE)
[edd166b]	713	self._check_value_enter(self.fittable_param ,is_modified)
	714	self._check_value_enter(self.parameters ,is_modified)
[920a6e5]	715	except:
	716	tcrtl.SetBackgroundColour("pink")
[edd166b]	717	msg= "Model Error:wrong value entered : %s"% sys.exc_value
	718	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	719	return
[920a6e5]	720	else:
	721	tcrtl.SetBackgroundColour(wx.WHITE)
[e2f7b92]	722
[edd166b]	723	#self._undo.Enable(True)
	724	self.save_current_state()
	725	event = PageInfoEvent(page = self)
	726	wx.PostEvent(self.parent, event)
	727	self.state_change= False
[c69b6d5]	728
[12eac73]	729
	730	def _onQrangeEnter(self, event):
	731	"""
	732	Check validity of value enter in the Q range field
	733	"""
	734
	735	tcrtl= event.GetEventObject()
	736	#Clear msg if previously shown.
	737	msg= ""
	738	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	739	# Flag to register when a parameter has changed.
	740	is_modified = False
	741	if tcrtl.GetValue().lstrip().rstrip()!="":
	742	try:
	743	value = float(tcrtl.GetValue())
	744	tcrtl.SetBackgroundColour(wx.WHITE)
	745
	746	# If qmin and qmax have been modified, update qmin and qmax
[85b3971]	747	if self._validate_qrange( self.qmin, self.qmax):
[12eac73]	748	tempmin = float(self.qmin.GetValue())
	749	if tempmin != self.qmin_x:
	750	self.qmin_x = tempmin
	751	tempmax = float(self.qmax.GetValue())
	752	if tempmax != self.qmax_x:
	753	self.qmax_x = tempmax
	754	else:
	755	tcrtl.SetBackgroundColour("pink")
	756	msg= "Model Error:wrong value entered : %s"% sys.exc_value
	757	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	758	return
	759
	760	except:
	761	tcrtl.SetBackgroundColour("pink")
	762	msg= "Model Error:wrong value entered : %s"% sys.exc_value
	763	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	764	return
	765	#Check if # of points for theory model are valid(>0).
	766	if self.npts != None:
	767	if check_float(self.npts):
	768	temp_npts = float(self.npts.GetValue())
	769	if temp_npts != self.num_points:
	770	self.num_points = temp_npts
	771	is_modified = True
	772	else:
	773	msg= "Cannot Plot :No npts in that Qrange!!! "
	774	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	775
	776	else:
	777	tcrtl.SetBackgroundColour("pink")
	778	msg= "Model Error:wrong value entered!!!"
	779	wx.PostEvent(self.parent.parent, StatusEvent(status = msg ))
	780
	781	self.compute_chisqr()
	782	#self._undo.Enable(True)
	783	self.save_current_state()
	784	event = PageInfoEvent(page = self)
	785	wx.PostEvent(self.parent, event)
	786	self.state_change= False
[66c488b]	787	self._draw_model()
	788
[edd166b]	789	def _clear_Err_on_Fit(self):
	790	"""
	791	hide the error text control shown
	792	after fitting
	793	"""
	794
	795	if hasattr(self,"text2_3"):
	796	self.text2_3.Hide()
	797
	798	if len(self.parameters)>0:
	799	for item in self.parameters:
	800	#Skip t ifhe angle parameters if 1D data
	801	if self.data.__class__.__name__ !="Data2D":
	802	if item in self.orientation_params:
	803	continue
	804	if item in self.param_toFit:
	805	continue
	806	## hide statictext +/-
	807	if item[3]!=None and item[3].IsShown():
	808	item[3].Hide()
	809	## hide textcrtl for error after fit
	810	if item[4]!=None and item[4].IsShown():
	811	item[4].Hide()
[7975f2b]	812
[edd166b]	813	if len(self.fittable_param)>0:
	814	for item in self.fittable_param:
	815	#Skip t ifhe angle parameters if 1D data
	816	if self.data.__class__.__name__ !="Data2D":
	817	if item in self.orientation_params:
	818	continue
	819	if item in self.param_toFit:
	820	continue
	821	## hide statictext +/-
	822	if item[3]!=None and item[3].IsShown():
	823	item[3].Hide()
	824	## hide textcrtl for error after fit
	825	if item[4]!=None and item[4].IsShown():
	826	item[4].Hide()
	827	return
[920a6e5]	828
[882a912]	829
	830	def set_data(self, data ):
	831	"""
	832	reset the current data
	833	"""
	834	if data ==None:
	835	return
	836	self.data =data
	837	self.state.data= data
	838	self._fill_datainfo_sizer()
	839
[240b9966]	840	def reset_page(self, state,first=False):
[a074145]	841	"""
	842	reset the state
	843	"""
	844	self.reset_page_helper(state)
[b421b1a]	845	import sans.guiframe.gui_manager
[f20767b]	846	evt = ModelEventbox(model=state.model)
[edd166b]	847	wx.PostEvent(self.event_owner, evt)
	848
	849	if self.engine_type != None:
	850	self.manager._on_change_engine(engine=self.engine_type)
[7975f2b]	851
[edd166b]	852	self.select_param(event = None)
	853	#Save state_fit
[c985bef]	854	self.save_current_state_fit()
[7975f2b]	855	self._lay_out()
[c985bef]	856	self.Refresh()
[edd166b]	857
[2140e68]	858	def get_range(self):
	859	"""
	860	return the fitting range
	861	"""
[c9a4377]	862	return float(self.qmin_x) , float(self.qmax_x)
[7975f2b]	863
	864	def get_npts2fit(self):
	865	"""
	866	return numbers of data points within qrange
	867	Note: This is for Park where chi2 is not normalized by Npts of fit
	868	"""
	869	npts2fit = 0
	870	qmin,qmax = self.get_range()
	871	if self.data.__class__.__name__ =="Data2D":
	872	for qx in self.data.x_bins:
	873	for qy in self.data.y_bins:
	874	if math.sqrt((qxqx)+(qyqy)) >= qmin \
	875	and math.sqrt((qxqx)+(qyqy)) <= qmax:
	876	npts2fit += 1
	877	else:
	878	for qx in self.data.x:
	879	if qx >= qmin and qx <= qmax:
	880	npts2fit += 1
	881	return npts2fit
	882
[c69b6d5]	883
	884	def get_chi2(self):
	885	"""
	886	return the current chi2
	887	"""
	888	return self.tcChi.GetLabel()
[c77d859]	889
	890	def get_param_list(self):
	891	"""
	892	@return self.param_toFit: list containing references to TextCtrl
	893	checked.Theses TextCtrl will allow reference to parameters to fit.
	894	@raise: if return an empty list of parameter fit will nnote work
	895	properly so raise ValueError,"missing parameter to fit"
	896	"""
	897	if self.param_toFit !=[]:
	898	return self.param_toFit
	899	else:
	900	raise ValueError,"missing parameter to fit"
	901
[6d91073]	902	def onsetValues(self,chisqr,p_name, out,cov):
[c77d859]	903	"""
	904	Build the panel from the fit result
	905	@param chisqr:Value of the goodness of fit metric
[6d91073]	906	@p_name: the name of parameters
[c77d859]	907	@param out:list of parameter with the best value found during fitting
	908	@param cov:Covariance matrix
	909
	910	"""
[edd166b]	911	if out == None or not numpy.isfinite(chisqr):
	912	raise ValueError,"Fit error occured..."
	913
	914	is_modified = False
	915	has_error = False
[7975f2b]	916
	917	#Hide textctrl boxes of errors.
[edd166b]	918	self._clear_Err_on_Fit()
[7975f2b]	919
	920	#Check if chi2 is finite
	921	if chisqr != None or numpy.isfinite(chisqr):
[c69b6d5]	922	#format chi2
[7975f2b]	923	npt_fit = float(self.get_npts2fit())
	924	if self.engine_type == "park" and npt_fit > 0:
	925	chisqr =chisqr/npt_fit
	926	chi2 = format_number(chisqr)
	927	self.tcChi.SetLabel(chi2)
	928	self.tcChi.Refresh()
	929	else:
	930	self.tcChi.SetLabel("-")
[c13b8cc]	931
[edd166b]	932	#Hide error title
	933	if self.text2_3.IsShown():
	934	self.text2_3.Hide()
	935
[e473e4f5]	936	try:
	937	n = self.disp_box.GetCurrentSelection()
	938	dispersity= self.disp_box.GetClientData(n)
[7975f2b]	939	if dispersity !=None and self.enable_disp.GetValue():
	940	name= dispersity.__name__
	941	if name == "GaussianDispersion":
	942	if hasattr(self,"text_disp_1" ):
	943	if self.text_disp_1 !=None:
	944	self.text_disp_1.Hide()
[e473e4f5]	945	except:
[7975f2b]	946	dispersty = None
[e473e4f5]	947	pass
[c77d859]	948	#set the panel when fit result are float not list
[c99a6c5]	949	if out.__class__== numpy.float64:
[c77d859]	950	self.param_toFit[0][2].SetValue(format_number(out))
[0a518e4c]	951
[c69b6d5]	952	if self.param_toFit[0][4].IsShown:
	953	self.param_toFit[0][4].Hide()
[c77d859]	954	if cov !=None :
	955	self.text2_3.Show(True)
[e473e4f5]	956	try:
[7975f2b]	957	if dispersity !=None:
	958	name= dispersity.__name__
	959	if name == "GaussianDispersion" and self.enable_disp.GetValue():
	960	if hasattr(self,"text_disp_1" ):
	961	if self.text_disp_1 !=None:
	962	self.text_disp_1.Show(True)
[e473e4f5]	963	except:
	964	pass
[c99a6c5]	965
[ad6dd4c]	966	if cov[0]==None or not numpy.isfinite(cov[0]):
[c69b6d5]	967	if self.param_toFit[0][3].IsShown:
	968	self.param_toFit[0][3].Hide()
[7975f2b]	969	else:
	970	self.param_toFit[0][3].Show(True)
[69bee6d]	971	self.param_toFit[0][4].Show(True)
[c69b6d5]	972	self.param_toFit[0][4].SetValue(format_number(cov[0]))
[ffb838f]	973	has_error = True
[c77d859]	974	else:
[edd166b]	975
[c69b6d5]	976	i = 0
[c77d859]	977	#Set the panel when fit result are list
[7975f2b]	978	for item in self.param_toFit:
[edd166b]	979	if len(item)>5 and item != None:
	980	## reset error value to initial state
[7975f2b]	981	item[3].Hide()
	982	item[4].Hide()
	983
[edd166b]	984	for ind in range(len(out)):
	985
	986	if item[1] == p_name[ind]:
	987	break
[7975f2b]	988	if len(out)<=len(self.param_toFit) and out[ind] !=None:
	989	val_out = format_number(out[ind])
	990	item[2].SetValue(val_out)
[c99a6c5]	991
[7975f2b]	992	if(cov !=None):
[edd166b]	993
	994	try:
[7975f2b]	995	if dispersity !=None:
	996	name= dispersity.__name__
	997	if name == "GaussianDispersion" and self.enable_disp.GetValue():
	998	if hasattr(self,"text_disp_1" ):
	999	if self.text_disp_1!=None:
	1000	if not self.text_disp_1.IsShown():
	1001	self.text_disp_1.Show(True)
[edd166b]	1002	except:
	1003	pass
	1004
[7975f2b]	1005	if cov[ind]!=None :
	1006	if numpy.isfinite(float(cov[ind])):
	1007	val_err = format_number(cov[ind])
	1008	item[3].Show(True)
	1009	item[4].Show(True)
	1010	item[4].SetValue(val_err)
	1011
	1012	has_error = True
[edd166b]	1013	i += 1
[c99a6c5]	1014	#Show error title when any errors displayed
[b421b1a]	1015	if has_error:
[c99a6c5]	1016	if not self.text2_3.IsShown():
[edd166b]	1017	self.text2_3.Show(True)
[7975f2b]	1018
	1019	## save current state
	1020	self.save_current_state()
	1021	#plot model
	1022	self._draw_model()
	1023	self._lay_out()
	1024	#PostStatusEvent
	1025	msg="Fit completed! "
	1026	wx.PostEvent(self.manager.parent, StatusEvent(status=msg))
	1027
[c69b6d5]	1028
[c77d859]	1029	def onSmear(self, event):
	1030	"""
	1031	Create a smear object that will change the way residuals
	1032	are compute when fitting
	1033	"""
[2a2af47]	1034	if self.model ==None:
	1035	msg="Need model and data to smear plot"
	1036	wx.PostEvent(self.manager.parent, StatusEvent(status=\
	1037	"Smear: %s"%msg))
	1038	return
[3370922]	1039	temp_smearer = None
[c77d859]	1040	if self.enable_smearer.GetValue():
[997131a]	1041	temp_smearer= self.smearer
[c77d859]	1042	if hasattr(self.data,"dxl"):
	1043	msg= ": Resolution smearing parameters"
	1044	if hasattr(self.data,"dxw"):
	1045	msg= ": Slit smearing parameters"
[997131a]	1046	if self.smearer ==None:
[c77d859]	1047	wx.PostEvent(self.manager.parent, StatusEvent(status=\
	1048	"Data contains no smearing information"))
	1049	else:
	1050	wx.PostEvent(self.manager.parent, StatusEvent(status=\
	1051	"Data contains smearing information %s"%msg))
[3370922]	1052
[fb8daaaf]	1053	## set smearing value whether or not the data contain the smearing info
[3370922]	1054	self.manager.set_smearer(smearer=temp_smearer, qmin= float(self.qmin_x),
[2b63df0]	1055	qmax= float(self.qmax_x))
[875f1a2]	1056	##Calculate chi2
[997131a]	1057	self.compute_chisqr(smearer= temp_smearer)
[5582a9f1]	1058
	1059	self.state.enable_smearer= self.enable_smearer.GetValue()
	1060	self.state.disable_smearer=self.disable_smearer.GetValue()
[847091f]	1061
[2b63df0]	1062	def complete_chisqr(self, output, elapsed=None):
	1063	"""
	1064	print result chisqr
	1065	"""
	1066	try:
[077809c]	1067	if output ==None:
	1068	output= "-"
[edd166b]	1069
[ba95543]	1070	self.tcChi.SetLabel(str(format_number(output)))
[12eac73]	1071
[edd166b]	1072	self.state.tcChi =self.tcChi
[5582a9f1]	1073
[2b63df0]	1074	except:
[0aeabc6]	1075	pass
[2b63df0]	1076
	1077
	1078	def compute_chisqr1D(self, smearer=None):
	1079	"""
	1080	Compute chisqr for 1D
	1081	"""
	1082	try:
	1083	self.qmin_x = float(self.qmin.GetValue())
	1084	self.qmax_x = float(self.qmax.GetValue())
	1085	##return residuals within self.qmin_x and self.qmax_x
	1086	from gui_thread import CalcChisqr1D
	1087	## If a thread is already started, stop it
	1088	if self.calc_Chisqr!= None and self.calc_Chisqr.isrunning():
	1089	self.calc_Chisqr.stop()
	1090
[077809c]	1091	self.calc_Chisqr= CalcChisqr1D( data1d= self.data,
[2b63df0]	1092	model= self.model,
	1093	smearer=smearer,
	1094	qmin=self.qmin_x,
	1095	qmax=self.qmax_x,
	1096	completefn = self.complete_chisqr,
	1097	updatefn = None)
	1098
	1099	self.calc_Chisqr.queue()
	1100
	1101	except:
	1102	raise ValueError," Could not compute Chisqr for %s Model 2D: "%self.model.name
	1103
	1104
	1105
	1106
[b787e68c]	1107
[c77d859]	1108	def compute_chisqr2D(self):
	1109	"""
	1110	compute chi square given a model and data 2D and set the value
	1111	to the tcChi txtcrl
	1112	"""
[2b63df0]	1113	try:
	1114	self.qmin_x = float(self.qmin.GetValue())
	1115	self.qmax_x = float(self.qmax.GetValue())
	1116
	1117	##return residuals within self.qmin_x and self.qmax_x
	1118	from gui_thread import CalcChisqr2D
	1119	## If a thread is already started, stop it
	1120	if self.calc_Chisqr!= None and self.calc_Chisqr.isrunning():
	1121	self.calc_Chisqr.stop()
[0aeabc6]	1122
[077809c]	1123	self.calc_Chisqr= CalcChisqr2D( data2d= self.data,
[2b63df0]	1124	model= self.model,
	1125	qmin= self.qmin_x,
	1126	qmax = self.qmax_x,
	1127	completefn = self.complete_chisqr,
	1128	updatefn = None)
[c77d859]	1129
[2b63df0]	1130	self.calc_Chisqr.queue()
	1131
	1132	except:
[077809c]	1133	raise
[2b63df0]	1134
[c77d859]	1135
[997131a]	1136	def compute_chisqr(self , smearer=None):
[c77d859]	1137	"""
	1138	compute chi square given a model and data 1D and set the value
	1139	to the tcChi txtcrl
	1140	"""
[85b3971]	1141	flag = self._validate_qrange( self.qmin, self.qmax)
[c77d859]	1142	if flag== True:
	1143	try:
	1144	if hasattr(self.data,"data"):
	1145	self.compute_chisqr2D()
	1146	return
	1147	else:
[2b63df0]	1148	self.compute_chisqr1D(smearer=smearer)
	1149	return
[c77d859]	1150	except:
[077809c]	1151	wx.PostEvent(self.parent.parent, StatusEvent(status=\
[2b63df0]	1152	"Chisqr Error: %s"% sys.exc_value))
[a8088d7]	1153	return
[c77d859]	1154
	1155
	1156	def select_all_param(self,event):
	1157	"""
	1158	set to true or false all checkBox given the main checkbox value cb1
[d1e0473]	1159	"""
	1160
[c77d859]	1161	self.param_toFit=[]
	1162	if self.parameters !=[]:
[998b6b8]	1163	if self.cb1.GetValue():
[c77d859]	1164	for item in self.parameters:
[3fef0a8]	1165	## for data2D select all to fit
	1166	if self.data.__class__.__name__=="Data2D":
[c77d859]	1167	item[0].SetValue(True)
	1168	self.param_toFit.append(item )
[3fef0a8]	1169	else:
	1170	## for 1D all parameters except orientation
	1171	if not item in self.orientation_params:
	1172	item[0].SetValue(True)
	1173	self.param_toFit.append(item )
	1174	if len(self.fittable_param)>0:
	1175	for item in self.fittable_param:
	1176	if self.data.__class__.__name__=="Data2D":
	1177	item[0].SetValue(True)
	1178	self.param_toFit.append(item )
	1179	else:
	1180	## for 1D all parameters except orientation
[513115c]	1181	if not item in self.orientation_params_disp:
[3fef0a8]	1182	item[0].SetValue(True)
	1183	self.param_toFit.append(item )
[c77d859]	1184	else:
	1185	for item in self.parameters:
	1186	item[0].SetValue(False)
	1187	for item in self.fittable_param:
	1188	item[0].SetValue(False)
	1189	self.param_toFit=[]
[330573d]	1190
[52cac46]	1191	self.save_current_state_fit()
[3595309d]	1192	if event !=None:
[3a37fe0]	1193	#self._undo.Enable(True)
[3595309d]	1194	## post state to fit panel
	1195	event = PageInfoEvent(page = self)
	1196	wx.PostEvent(self.parent, event)
	1197
[c77d859]	1198
	1199
	1200	def select_param(self,event):
	1201	"""
	1202	Select TextCtrl checked for fitting purpose and stores them
	1203	in self.param_toFit=[] list
	1204	"""
	1205	self.param_toFit=[]
	1206	for item in self.parameters:
[edd166b]	1207	#Skip t ifhe angle parameters if 1D data
	1208	if self.data.__class__.__name__ !="Data2D":
	1209	if item in self.orientation_params:
	1210	continue
[c77d859]	1211	#Select parameters to fit for list of primary parameters
[998b6b8]	1212	if item[0].GetValue():
[c77d859]	1213	if not (item in self.param_toFit):
	1214	self.param_toFit.append(item )
	1215	else:
	1216	#remove parameters from the fitting list
	1217	if item in self.param_toFit:
	1218	self.param_toFit.remove(item)
[edd166b]	1219
[c77d859]	1220	#Select parameters to fit for list of fittable parameters with dispersion
	1221	for item in self.fittable_param:
[edd166b]	1222	#Skip t ifhe angle parameters if 1D data
	1223	if self.data.__class__.__name__ !="Data2D":
	1224	if item in self.orientation_params:
	1225	continue
[998b6b8]	1226	if item[0].GetValue():
[c77d859]	1227	if not (item in self.param_toFit):
	1228	self.param_toFit.append(item)
	1229	else:
	1230	#remove parameters from the fitting list
	1231	if item in self.param_toFit:
[edd166b]	1232	self.param_toFit.remove(item)
	1233
	1234	#Calculate num. of angle parameters
	1235	if self.data.__class__.__name__ =="Data2D":
	1236	len_orient_para = 0
	1237	else:
	1238	len_orient_para = len(self.orientation_params) #assume even len
	1239	#Total num. of angle parameters
	1240	if len(self.fittable_param) > 0:
	1241	len_orient_para *= 2
[c77d859]	1242	#Set the value of checkbox that selected every checkbox or not
[edd166b]	1243	if len(self.parameters)+len(self.fittable_param)-len_orient_para ==len(self.param_toFit):
[c77d859]	1244	self.cb1.SetValue(True)
	1245	else:
	1246	self.cb1.SetValue(False)
[52cac46]	1247	self.save_current_state_fit()
[3595309d]	1248	if event !=None:
[3a37fe0]	1249	#self._undo.Enable(True)
[3595309d]	1250	## post state to fit panel
	1251	event = PageInfoEvent(page = self)
	1252	wx.PostEvent(self.parent, event)
	1253
[c77d859]	1254
	1255
[77e23a2]	1256	def set_model_param_sizer(self, model):
[c77d859]	1257	"""
	1258	Build the panel from the model content
	1259	@param model: the model selected in combo box for fitting purpose
	1260	"""
	1261	self.sizer3.Clear(True)
	1262	self.parameters = []
	1263	self.param_toFit=[]
	1264	self.fittable_param=[]
	1265	self.fixed_param=[]
[780d095]	1266	self.orientation_params=[]
[60132ef]	1267	self.orientation_params_disp=[]
[c77d859]	1268
	1269	if model ==None:
	1270	self.sizer3.Layout()
[08ba57d]	1271	self.SetScrollbars(20,20,25,65)
[c77d859]	1272	return
[707436d]	1273	## the panel is drawn using the current value of the fit engine
	1274	if self.engine_type==None and self.manager !=None:
	1275	self.engine_type= self.manager._return_engine_type()
[c99a6c5]	1276
[707436d]	1277
[c77d859]	1278	box_description= wx.StaticBox(self, -1,str("Model Parameters"))
	1279	boxsizer1 = wx.StaticBoxSizer(box_description, wx.VERTICAL)
	1280	sizer = wx.GridBagSizer(5,5)
	1281	## save the current model
	1282	self.model = model
	1283
	1284	keys = self.model.getParamList()
	1285	#list of dispersion paramaters
	1286	self.disp_list=self.model.getDispParamList()
[b421b1a]	1287
[c77d859]	1288	keys.sort()
	1289
[6dc9ad8]	1290	iy = 0
[c77d859]	1291	ix = 0
	1292	self.cb1 = wx.CheckBox(self, -1,"Select all", (10, 10))
	1293	wx.EVT_CHECKBOX(self, self.cb1.GetId(), self.select_all_param)
	1294	self.cb1.SetValue(False)
	1295
	1296	sizer.Add(self.cb1,(iy, ix),(1,1),\
[eda428b]	1297	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
[c77d859]	1298	ix +=1
	1299	self.text2_2 = wx.StaticText(self, -1, 'Values')
	1300	sizer.Add(self.text2_2,(iy, ix),(1,1),\
	1301	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1302	ix +=2
	1303	self.text2_3 = wx.StaticText(self, -1, 'Errors')
	1304	sizer.Add(self.text2_3,(iy, ix),(1,1),\
	1305	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1306	self.text2_3.Hide()
	1307	ix +=1
	1308	self.text2_min = wx.StaticText(self, -1, 'Min')
	1309	sizer.Add(self.text2_min,(iy, ix),(1,1),\
	1310	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1311	self.text2_min.Hide()
	1312	ix +=1
	1313	self.text2_max = wx.StaticText(self, -1, 'Max')
	1314	sizer.Add(self.text2_max,(iy, ix),(1,1),\
	1315	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1316	self.text2_max.Hide()
[6fdfc8f]	1317	ix += 1
	1318	self.text2_4 = wx.StaticText(self, -1, '[Units]')
	1319	sizer.Add(self.text2_4,(iy, ix),(1,1),\
	1320	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1321	self.text2_4.Hide()
[dcf29d7]	1322	if self.engine_type=="park":
	1323	self.text2_max.Show(True)
	1324	self.text2_min.Show(True)
[b421b1a]	1325
[c77d859]	1326	for item in keys:
[780d095]	1327	if not item in self.disp_list and not item in self.model.orientation_params:
[b421b1a]	1328
	1329	##prepare a spot to store errors
	1330	if not self.model.details.has_key(item):
	1331	self.model.details [item] = ["",None,None]
	1332
[c77d859]	1333	iy += 1
	1334	ix = 0
	1335	## add parameters name with checkbox for selecting to fit
	1336	cb = wx.CheckBox(self, -1, item )
	1337	cb.SetValue(False)
	1338	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
	1339	sizer.Add( cb,( iy, ix),(1,1),
[eda428b]	1340	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
[d1e0473]	1341
[c77d859]	1342	## add parameter value
	1343	ix += 1
	1344	value= self.model.getParam(item)
[7975f2b]	1345	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
[c77d859]	1346	style=wx.TE_PROCESS_ENTER)
	1347
[77e23a2]	1348	ctl1.SetValue(format_number(value))
[c77d859]	1349	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
	1350	## text to show error sign
	1351	ix += 1
	1352	text2=wx.StaticText(self, -1, '+/-')
	1353	sizer.Add(text2,(iy, ix),(1,1),\
	1354	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1355	text2.Hide()
	1356	ix += 1
[c13b8cc]	1357	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
[c77d859]	1358	sizer.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[b421b1a]	1359	ctl2.Hide()
[c77d859]	1360
	1361	ix += 1
[7975f2b]	1362	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[e2f7b92]	1363	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	1364	text_enter_callback = self._onparamRangeEnter)
[eacf1d66]	1365
[c77d859]	1366	sizer.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1367	ctl3.Hide()
[77e23a2]	1368
[c77d859]	1369	ix += 1
[7975f2b]	1370	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[e2f7b92]	1371	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	1372	text_enter_callback = self._onparamRangeEnter)
[c77d859]	1373	sizer.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[eacf1d66]	1374
[c77d859]	1375	ctl4.Hide()
[edd166b]	1376
[dcf29d7]	1377	if self.engine_type=="park":
	1378	ctl3.Show(True)
	1379	ctl4.Show(True)
[6fdfc8f]	1380	ix +=1
	1381	# Units
[7975f2b]	1382	if self.model.details.has_key(item):
[6fdfc8f]	1383	units = wx.StaticText(self, -1, self.model.details[item][0], style=wx.ALIGN_LEFT)
[7975f2b]	1384	else:
[6fdfc8f]	1385	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
	1386	sizer.Add(units, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[dcf29d7]	1387
[c77d859]	1388	##[cb state, name, value, "+/-", error of fit, min, max , units]
	1389	self.parameters.append([cb,item, ctl1,
[240b9966]	1390	text2,ctl2, ctl3, ctl4,units])
[2d5f7a1]	1391
[c77d859]	1392	iy+=1
[2a5bba7]	1393	sizer.Add((10,10),(iy,ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
[5af5183]	1394
[f20767b]	1395	# type can be either Guassian or Array
[5b53a5c]	1396	if len(self.model.dispersion.values())>0:
	1397	type= self.model.dispersion.values()[0]["type"]
	1398	else:
	1399	type = "Gaussian"
[6dc9ad8]	1400
	1401	iy += 1
	1402	ix = 0
	1403	#Add tile for orientational angle
	1404	for item in keys:
	1405	if item in self.model.orientation_params:
	1406	orient_angle = wx.StaticText(self, -1, '[For 2D only]:')
	1407	sizer.Add(orient_angle,(iy, ix),(1,1), wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 15)
	1408	if not self.data.__class__.__name__ =="Data2D":
	1409	orient_angle.Hide()
	1410	else:
	1411	orient_angle.Show(True)
	1412	break
[5b53a5c]	1413
[f20767b]	1414	#For Gaussian only
	1415	if type.lower() != "array":
	1416	for item in self.model.orientation_params:
	1417	if not item in self.disp_list:
[c13b8cc]	1418	##prepare a spot to store min max
	1419	if not self.model.details.has_key(item):
	1420	self.model.details [item] = ["",None,None]
	1421
[f20767b]	1422	iy += 1
	1423	ix = 0
	1424	## add parameters name with checkbox for selecting to fit
	1425	cb = wx.CheckBox(self, -1, item )
	1426	cb.SetValue(False)
	1427	wx.EVT_CHECKBOX(self, cb.GetId(), self.select_param)
	1428	if self.data.__class__.__name__ =="Data2D":
[6dc9ad8]	1429	cb.Show(True)
[f20767b]	1430	else:
[6dc9ad8]	1431	cb.Hide()
[f20767b]	1432	sizer.Add( cb,( iy, ix),(1,1),
	1433	wx.LEFT\|wx.EXPAND\|wx.ADJUST_MINSIZE, 5)
	1434
	1435	## add parameter value
	1436	ix += 1
	1437	value= self.model.getParam(item)
[7975f2b]	1438	ctl1 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH,20),
[f20767b]	1439	style=wx.TE_PROCESS_ENTER)
[780d095]	1440
[f20767b]	1441	ctl1.SetValue(format_number(value))
	1442	if self.data.__class__.__name__ =="Data2D":
[c5cd3b9]	1443	ctl1.Show(True)
[f20767b]	1444	else:
[c5cd3b9]	1445	ctl1.Hide()
[f20767b]	1446	sizer.Add(ctl1, (iy,ix),(1,1), wx.EXPAND)
	1447	## text to show error sign
	1448	ix += 1
	1449	text2=wx.StaticText(self, -1, '+/-')
	1450	sizer.Add(text2,(iy, ix),(1,1),\
	1451	wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1452	text2.Hide()
	1453	ix += 1
[c13b8cc]	1454	ctl2 = wx.TextCtrl(self, -1, size=(_BOX_WIDTH,20), style=0)
[e2f7b92]	1455
[f20767b]	1456	sizer.Add(ctl2, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1457	ctl2.Hide()
[e2f7b92]	1458
[c99a6c5]	1459
[f20767b]	1460	ix += 1
[7975f2b]	1461	ctl3 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[f20767b]	1462	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	1463	text_enter_callback = self._onparamRangeEnter)
[eacf1d66]	1464
[f20767b]	1465	sizer.Add(ctl3, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
	1466	ctl3.Hide()
[edd166b]	1467	#if self.data.__class__.__name__ =="Data2D":
	1468	# ctl3.Show(True)
[c99a6c5]	1469
[edd166b]	1470	#else:
	1471	# ctl3.Hide()
[c99a6c5]	1472
[f20767b]	1473	ix += 1
[7975f2b]	1474	ctl4 = self.ModelTextCtrl(self, -1, size=(_BOX_WIDTH/2,20), style=wx.TE_PROCESS_ENTER,
[f20767b]	1475	kill_focus_callback = self._onparamRangeEnter,
[7975f2b]	1476	text_enter_callback = self._onparamRangeEnter)
[f20767b]	1477	sizer.Add(ctl4, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[eacf1d66]	1478
[f20767b]	1479	ctl4.Hide()
[edd166b]	1480
	1481	if self.engine_type =="park" and self.data.__class__.__name__ =="Data2D":
[f20767b]	1482	ctl3.Show(True)
	1483	ctl4.Show(True)
[c5cd3b9]	1484
[f20767b]	1485	ix +=1
	1486	# Units
[7975f2b]	1487	if self.model.details.has_key(item):
[f20767b]	1488	units = wx.StaticText(self, -1, self.model.details[item][0], style=wx.ALIGN_LEFT)
[7975f2b]	1489	else:
[f20767b]	1490	units = wx.StaticText(self, -1, "", style=wx.ALIGN_LEFT)
	1491	if self.data.__class__.__name__ =="Data2D":
[6dc9ad8]	1492	units.Show(True)
[c99a6c5]	1493
[f20767b]	1494	else:
[6dc9ad8]	1495	units.Hide()
[c99a6c5]	1496
[f20767b]	1497	sizer.Add(units, (iy,ix),(1,1), wx.EXPAND\|wx.ADJUST_MINSIZE, 0)
[7975f2b]	1498
[f20767b]	1499	##[cb state, name, value, "+/-", error of fit, min, max , units]
	1500	self.parameters.append([cb,item, ctl1,
	1501	text2,ctl2, ctl3, ctl4,units])
	1502	self.orientation_params.append([cb,item, ctl1,
	1503	text2,ctl2, ctl3, ctl4,units])
[780d095]	1504
	1505	iy+=1
[c77d859]	1506
	1507	#Display units text on panel
	1508	for item in keys:
[7975f2b]	1509	if self.model.details.has_key(item):
[c77d859]	1510	self.text2_4.Show()
[7975f2b]	1511
[52cac46]	1512	#self.state.cb1 = self.cb1.GetValue()
	1513	#self._copy_parameters_state(self.orientation_params,
	1514	# self.state.orientation_params)
	1515	#self._copy_parameters_state(self.orientation_params_disp,
	1516	# self.state.orientation_params_disp)
	1517	#self._copy_parameters_state(self.parameters, self.state.parameters)
	1518	#self._copy_parameters_state(self.fittable_param, self.state.fittable_param)
	1519	#self._copy_parameters_state(self.fixed_param, self.state.fixed_param)
[b421b1a]	1520
[52cac46]	1521	self.save_current_state_fit()
[240b9966]	1522	boxsizer1.Add(sizer)
[c77d859]	1523	self.sizer3.Add(boxsizer1,0, wx.EXPAND \| wx.ALL, 10)
	1524	self.sizer3.Layout()
[330573d]	1525	self.Layout()
	1526	self.Refresh()
[08ba57d]	1527	self.SetScrollbars(20,20,25,65)
[52cac46]	1528
	1529
[c77d859]	1530
	1531	class HelpWindow(wx.Frame):
	1532	def __init__(self, parent, id, title):
	1533	wx.Frame.__init__(self, parent, id, title, size=(570, 400))
	1534
	1535	from sans.models.CylinderModel import CylinderModel
	1536	model = CylinderModel()
[2d5f7a1]	1537
[c77d859]	1538	from danse.common.plottools.plottables import Data1D
	1539	data= Data1D(x=[1,2], y=[3,4], dy=[0.1, 0,1])
	1540
[cfc0913]	1541	from fitpanel import PageInfo
[c77d859]	1542	myinfo = PageInfo(self, model, data=data )
	1543
	1544	## add data
	1545
	1546	from models import ModelList
	1547	mylist= ModelList()
	1548
	1549	from sans.models.SphereModel import SphereModel
	1550	from sans.models.SquareWellStructure import SquareWellStructure
	1551	from sans.models.DebyeModel import DebyeModel
	1552	from sans.models.LineModel import LineModel
	1553	name= "shapes"
	1554	list1= [SphereModel]
	1555	mylist.set_list( name, list1)
	1556
	1557	name= "Shape-independent"
	1558	list1= [DebyeModel]
	1559	mylist.set_list( name, list1)
	1560
	1561	name= "Structure Factors"
	1562	list1= [SquareWellStructure]
	1563	mylist.set_list( name, list1)
	1564
	1565	name= "Added models"
	1566	list1= [LineModel]
	1567	mylist.set_list( name, list1)
	1568
	1569	myinfo.model_list_box = mylist.get_list()
	1570
	1571	self.page = FitPage(self, myinfo)
	1572
	1573	self.Centre()
	1574	self.Show(True)
[eacf1d66]	1575
[c77d859]	1576	if __name__=="__main__":
	1577	app = wx.App()
	1578	HelpWindow(None, -1, 'HelpWindow')
	1579	app.MainLoop()
	1580

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/sansview/perspectives/fitting/fitpage.py @ 6e0e2d85

Download in other formats: