source: sasview/installers/README.txt @ d15ce7c6

magnetic_scattrelease-4.2.2ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249unittest-saveload
Last change on this file since d15ce7c6 was d15ce7c6, checked in by smk78, 6 years ago

Copied changes to README-next-release to README

  • Property mode set to 100644
File size: 44.5 KB
Line 
1Release Notes
2=============
3
41- Features
5===========
6    - New in Version 4.2.0
7      --------------------
8      This release heralds many improvements and a host of bug fixes, along with
9      some significant changes from previous versions. Further, as promised, it
10      marks the end of support for 32 bit operating systems and is only
11      available for 64 bit operating systems.
12
13      With this version the change to the new model API and plugins infrastructure
14      begun with 4.0 is essentially complete (though extensions are in the works
15      and more are likely they should remain backwardly compatible with previous
16      versions of SasView).
17
18      NOTE: Old-style plugin models, including old sum|multiply models will continue
19      to be supported (i.e. SasView will be able to run them) in 4.x. However,
20      the expectation is that such support will be removed in 5.0 and everyone
21      is strongly encouraged to convert their custom models to the new API.
22
23      Finally, the changes to orientation angles and orientational distribution
24      definitions are now also complete.
25
26      - Changes
27         - The infrastucture for calculating 2D patterns from 3D orientated objects
28           has been totally re-factored. It is now more accurate and consistent
29           across models.
30         - The way that SasView defines the orientation of anisometric and
31           aligned objects has been completely overhauled. It now differs from
32           previous versions.
33         - Plugin models, including sum|multiply models, have completely migrated
34           to the new infrastructure. NOTE that 3.x type models as well as early,
35           intermediate 4.x type models, including those generated by sum|multiply
36           will continue to be supported in 4.x but will likely no longer be
37           supported after the move to 5.0.  Users are strongly encouraged to
38           migrate any custom models.
39         - The NeXus loader has been removed as it is superseded by the NXcanSAS
40           standard loader and SasView does not support the treatment of raw
41           data.
42      - Improvements
43         - The accuracy/speed of some numerical integrations have been improved.
44         - An orientation viewer tool has been introduced to assist in
45           understanding the new orientation framework.
46         - Problems with the computation of magnetic scattering from some
47           objects have been rectified. Some questions remain however.
48         - The known issue with the core_shell_parallelepiped model is now fixed.
49         - A number of issues and inconsistencies with the creation of
50           sum|multiply models have been rectified.
51         - A Boltzmann distribution has been added for polydispersity/orientational
52           distributions.
53         - Some batch slicing options have been introduced.
54         - Correlation function analysis now computes both the 1D and 3D functions.
55         - There are several data loading improvements.
56         - There are several improvements to Save/Load Project.
57         - There have been numerous other bug fixes.
58      - Documentation
59           Several sections of the help documentation have undergone significant
60           checking and updating, particularly those relating to orientation,
61           magnetic scattering, and polydispersity distributions. Detailed
62           advanced instructions for plugin writing and some scripting
63           instructions have been added.
64      - Other work
65         - A Third-Party initiative has recently succeeded in getting SasView to
66           run on Debian. More details at
67           http://trac.sasview.org/wiki/DevNotes/Projects/Debian
68         - With this release we have started to prepare for the inevitable move
69           to Python 3, which will occur with the release of 5.0
70         - SasView 5.0 is currently in development. The two most significant
71           features of this version will be (i) a move away from the present
72           WxPython GUIs to new, completely rewritten, Qt5 GUIs, and
73           (ii)implementation of the Beta-approximation for S(Q). Subject to
74           resources, some limited access to the latter functionality may be
75           available in a future SasView 4.x release.
76      - Bug Fixes
77         Fixes # 260: Box integration does not update when entering values in dialog
78         Fixes # 446: Saving plot as PGF (not PDF!) format throws error
79         Fixes # 467: Extend batch functionality to slicer
80         Fixes # 489: ABS reader (NIST 1D) does not handle negative dx properly
81                      (USANS slit smearing)
82         Fixes # 499: create sin(x)/x, 2*J1(x)/x and 3*j1(x)/x functions
83         Fixes # 510: Build PDF documentation along with HTML
84         Fixes # 525: Add GUI category defaults to models in sasmodels
85         Fixes # 579: clean up sasview directory
86         Fixes # 597: Need to document Combine Batch Fit
87         Fixes # 645: GUI logic problem in Batch vs single fit mode
88         Fixes # 648: Need to allow user input background value in Pr perspective
89         Fixes # 685: Fix data upload to marketplace
90         Fixes # 695: linear slope in onion model
91         Fixes # 735: Review new Corfunc documentation
92         Fixes # 741: Recalculate P(Q) and S(Q) components on model update.
93         Fixes # 767: Sum/Product Models don't do what they should
94         Fixes # 776: angular dispersity
95         Fixes # 784: Add 3D integral to Correlation Function analysis
96         Fixes # 786: core_shell_parallelepiped 1-D model is incorrect
97         Fixes # 818: "report button" followed by "save" makes an empty pdf file
98         Fixes # 838: Fix model download from marketplace
99         Fixes # 848: can't save analysis when only one fit page
100         Fixes # 849: Load Folder should ignore files starting with "."
101         Fixes # 852: More unit tests, especially for oriented or 2d models
102         Fixes # 854: remove unnecessary sleep() in fitting perspective
103         Fixes # 856: Reading SAS_OPENCL from custom_config sometimes raises an ERROR
104         Fixes # 861: cannot defined a structure factor plugin
105         Fixes # 864: New Model Editor (simple plugin editor) error parsing
106                      parameter line
107         Fixes # 865: Plugin live discovery issues
108         Fixes # 866: inform user when NaN is returned from compute
109         Fixes # 869: fit page computation thread cleanup
110         Fixes # 875: Possible weirdness with 1D NXcanSAS data
111         Fixes # 876: Add check for HDF5 format in dataloader
112         Fixes # 887: reorganize tree, separating the installed source from the
113                      build source
114         Fixes # 889: Refactor dataloader error handling infrastructure
115         Fixes # 890: use new orientation definition for asymmetric shapes
116         Fixes # 891: update docs for oriented shapes with new orientation definition
117         Fixes # 896: equations in core shell parallelepiped docs do not match code
118         Fixes # 898: Image Viewer Tool file selector issue
119         Fixes # 899: Igor Reader q calculation
120         Fixes # 902: IgorReader Q calculation needs fixing/improving
121         Fixes # 903: sasview - all non-gui tests should be converted to run in Python 3
122         Fixes # 906: polydispersity not showing up in tabulated results
123         Fixes # 912: About box points to misleading contributors page on Github
124         Fixes # 915: load project issues
125         Fixes # 916: Proper Logging
126         Fixes # 920: Logarithmic binning option in the slice viewer
127         Fixes # 921: Improve developer communication methods
128         Fixes # 922: Remove support for all data formats that are not in q space
129         Fixes # 923: Add CI and trac integrations to Slack
130         Fixes # 930: fitting help says chisq is normalized to number of points
131         Fixes # 931: Allow admins to edit all models and upload data etc on
132                      marketplace
133         Fixes # 932: Need to fix upload of data files to marketplace
134         Fixes # 934: Slurp tutorial repo for tutorials
135         Fixes # 935: Build new tutorials as PDF
136         Fixes # 943: Deep copy error on setting model after data is selected
137         Fixes # 950: Most of the readers don't close files properly.
138         Fixes # 954: cross check dll/opencl/python polydispersity and
139                      orientation results
140         Fixes # 956: Possible problem with new doc build process
141         Fixes # 961: sasmodels tests should fail if the parameter name does not exist
142         Fixes # 962: star polymer typo in docs
143         Fixes # 967: no uncertainties errors on fitting parameters
144         Fixes # 969: About Box not picking up dls_logo.png
145         Fixes # 970: ASCII loader doesn't handle ISIS 2D ASCII
146         Fixes # 974: blacklist Intel HD 620/630 for double precision
147         Fixes # 978: load project fails for pages which have not been defined
148         Fixes # 983: Remove Nexus Loader
149         Fixes # 984: PDF reports are not being properly generated on Windows
150         Fixes # 985: Saving Project Fails
151         Fixes # 986: Send to fitting overwrites theory page even if blank
152                      FitPage has focus
153         Fixes # 990: utest_sasview.py giving different results than run_one.py
154         Fixes # 993: Windows x64 versions not installing to correct folder
155         Fixes # 994: Error changing fit engine
156         Fixes # 995: OpenCL required on Linux even if turned off in GUI
157         Fixes #1006: multiplicity models don't work with SQ
158         Fixes #1007: spherical_sld model freezes SasView
159         Fixes #1008: plugin model scaling not working? S
160         Fixes #1010: Win64 build script not creating working executable
161         Fixes #1011: sld_test failing on ubuntu
162         Fixes #1013: FileReaderBaseClass output[] not reset - same file loaded
163                      multiple times
164         Fixes #1018: add Boltzmann distribution
165         Fixes #1021: add PDF documentation to website and document in wiki
166                      release process
167         Fixes #1024: Update version numbers in master
168         Fixes #1025: Sum/multiply editor hangs
169         Fixes #1032: convert C++ modules to C
170         Fixes #1035: Order of combining P(Q) and S(Q) in Plugins seems to matter
171         Fixes #1037: data loader crop not working? & all fits crashing
172         Fixes #1043: problem compiling marketplace models
173         Fixes #1050: fix appveyor test for sasmodels win 64 python 3
174         Fixes #1052: Can't use a user-created plugin model in a plugin model
175         Fixes #1057: phi rotation issue for elliptical cylinder
176         Fixes #1060: incorrect default for rectangle dispersion
177         Fixes #1062: win32 build not installing correctly
178         Fixes #1064: Fitting did not converge!!! error with a Sum|Multi plugin model
179         Fixes #1069: GUI problem when using polydispersity/orientation distributions
180         Fixes #1070: Parameter error boxes should not be editable
181         Fixes #1079: Remove save button in report dialog on Mac
182         Fixes #1081: GUI problem with new orientation distribution
183         Fixes #1083: Magnetic models not being computed
184         Fixes #1099: Erratic behaviour of Sum|Multi model in 4.1.2
185         Fixes #1101: Batch results page not displaying polydispersity values
186         Fixes #1131: OpencCl dialog does not open
187         Fixes #1132: Slit Size Calculator Tool not working
188         Fixes #1139: Missing Docs and Help for new Batch Slicing
189         Fixes #1141: Intro to scripting.rst needs improvement
190         Fixes #1142: Plugin framework is broken
191         Fixes #1044: Unable to upload c file to marketplace
192         Fixes #1145: Update models in model marketplace to 4.2 when 4.2 is released.
193         Fixes #1148: Documentation for S(Q) models need updating
194         Fixes #1128: AutoPlot generation for model documentation does not
195                      include background
196
197      It is recommended that all users upgrade to this version, but your
198      attention is drawn to the Changes section above.
199
200
201    - New in Version 4.2.0-Beta
202      -------------------------
203      This is a beta pre-release version of 4.2.0.  A number of fixes and changes
204      have been made in the year since the previous release. Full release notes
205      will be compiled prior to the full release 4.2.0.
206
207      Highlights are:
208        - Infrastucture for calculating 2D patterns from 3D orientated objects
209          has now been totally refactored
210        - Plugins have completely migrated to the new infrastructure now,
211          including sum/multiply models
212        - Some batch slicing options have been introduced
213        - The known issue with the core_shell_parallelepiped is now fixed
214        - Several data loading improvements
215        - Several save Project improvements (though there are more to come)
216        - Numerous bug fixes
217        - Lots of documentation enhancement
218
219      In the meantime please report any bugs or issues found while using this beta
220
221
222    - New in Version 4.1.2
223      --------------------
224      This point release is a bug-fix release addressing:
225
226       - Fixes #984: PDF Reports Generate Empty PDFs
227       - Fixes a path typo
228       - 64 bit and 32 bit Windows executables now available
229
230      It is recommended that all users upgrade to this version
231
232
233    - New in Version 4.1.1
234      --------------------
235      This point release is a bug-fix release addressing:
236
237       - Fixes #948: Mathjax CDN is going away
238       - Fixes #938: Cannot read canSAS1D file output by SasView
239       - Fixes #960: Save project throws error if empty fit page
240       - Fixes #929: Problem deleting data in first fit page
241       - Fixes #918: Test folders not bundled with release
242       - Fixes an issue with the live discovery of plugin models
243       - Fixes an issue with the NXcanSAS data loader
244       - Updated tutorials for SasView 4.x.y
245
246
247    - New in Version 4.1.0
248      ------------------
249      This incremental release brings a series of new features and improvements,
250      and a host of bug fixes. Of particular note are:
251
252      - Correlation Function Analysis (Corfunc)
253        This performs a correlation function analysis of one-dimensional SAXS/SANS data,
254        or generates a model-independent volume fraction profile from the SANS from an
255        adsorbed polymer/surfactant layer.
256
257        A correlation function may be interpreted in terms of an imaginary rod moving
258        through the structure of the material. G1(R) is the probability that a rod of
259        length R moving through the material has equal electron/neutron scattering
260        length density at either end. Hence a frequently occurring spacing within a
261        structure manifests itself as a peak.
262
263        A volume fraction profile \Phi(z) describes how the density of polymer
264        segments/surfactant molecules varies with distance from an (assumed locally flat)
265        interface.
266
267      - Fitting of SESANS Data
268        Data from Spin-Echo SANS measurements can now be loaded and fitted. The data will
269        be plotted against the correct axes and models will automatically perform a Hankel
270        transform in order to calculate SESANS from a SANS model.
271
272      - Documentation
273        The documentation has undergone significant checking and updating.
274
275      - Improvements
276        - Correlation function (corfunc) analysis of 1D SAS data added from CCP13
277        - File converter tool for multi-file single column data sets
278        - SESANS data loading and direct fitting using the Hankel transformation
279        - Saving and loading of simultaneous and constrained fits now supported
280        - Save states from SasView v3.x.y now loaded using sasmodel model names
281        - Saving and loading of projects with 2D fits now supported
282        - Loading a project removes all existing data, fits, and plots
283        - Structure factor and form factor can be plotted independently
284        - OpenCL is disabled by default and can be enabled through a fit menu
285        - Data and theory fields are now independently expandable
286      - Bug Fixes
287        - Fixes #667: Models computed multiple times on parameters changes
288        - Fixes #673: Custom models override built in models of same name
289        - Fixes #678: Hard crash when running complex models on GPU
290        - Fixes $774: Old style plugin models unloadable
291        - Fixes #789: stacked disk scale doesn't match cylinder model
292        - Fixes #792: core_shell_fractal uses wrong effective radius
293        - Fixes #800: Plot range reset on plot redraws
294        - Fixes #811 and #825: 2D smearing broken
295        - Fixes #815: Integer model parameter handling
296        - Fixes #824: Cannot apply sector averaging when no detector data present
297        - Fixes #830: Cansas HDF5 reader fully compliant with NXCanSAS v1.0 format
298        - Fixes #835: Fractal model breaks with negative Q values
299        - Fixes #843: Multilayer vesicle does not define effective radius
300        - Fixes #858: Hayter MSA S(Q) returns errors
301        - Numerous grammatical and contexual errors in documention
302
303
304    - New in Version 4.0.1
305      ------------------
306      This release fixes the critical bug #750 in P(Q)*S(Q).  Most damaging
307      it appears that the background term was being added to S(Q) prior to
308      multiplication by P(Q).
309
310
311    - New in Version 4.0
312      ------------------
313      This release fixes the various bugs found during the alpha and beta testing
314      - Improvements
315        - Support for reading data files from Anton Paar Saxess instruments
316        - Adds documentation on how to write custom models in the new framework
317      - Bug Fixes
318        - Fixes bug #604 Pringle model questions
319        - Fixes bug #472 Reparameterize Teubner-Strey
320        - Fixes bug #530 Numerical instabilities in Teubner Strey model
321        - Fixes bug #658 ASCII reader very broken
322
323
324    - New in Version 4.0 beta 1
325      --------------------
326      This beta adds support for the magnetic and multilevel models of 3.1.2
327      and along with a host of bug fixes found in the alpha.
328
329      - Model package changes and improvements
330         - All 3.1.2 models now available in new interface
331         - Old custom models should now still work
332            - '''NOTE:''' These will be deprecated in a future version. Old
333              custom models should be converted to the new model format which
334              is now the same as the built in models and offers much better
335              support.
336         - Custom model editor now creates new style models
337         - Custom model editor supports better error checking
338      - Documentation improvements
339        - Continued general cleanup
340      - Other improvements/additions
341         - Support for new canSAS 2D data files added
342         - Plot axes range can now be set manually as well as by zooming
343         - Plot annotations can now be moved around after being placed on plot.
344         - The active optimizer is now listed on the top of the fit panel.
345         - Linear fits now update qmin and max when the x scale limits are
346           changed.  Also the plot range no longer resets after a fit.
347      - Bug fixes
348         - Fixes bug #511 Errors in linearized fits and clean up of interface
349           including Kratky representation
350         - Fixes bug #186 Data operation Tool now executes when something is
351           entered in the text box and does not wait for the user to hit enter
352         - Fixes bug #459 plot context menu bug
353         - Fixes bug #559 copy to clipboard in graph menu broken
354         - Fixes bug #466 cannot remove a linear fit from graph
355         - Numerous bugs introduced in the alpha
356
357
358
359    - New in Version 4.0.0-alpha
360      --------------------
361      This alpha release brings a major overhaul of the model system. The new model
362      package allows rapid integration of custom models and access to polydispersity
363      without requiring a compiler.
364
365      - Model package changes and improvements
366         - Model interface moved to independent sasmodels package.
367         - Most models converted to new interface.
368         - Allows rapid integration of user-written models.
369         - OpenCL GPU utilization for faster fitting.
370         - Improved numerical integration of Bessel functions.
371      - SESANS integration and implementation
372         - Scripting interface added for analysis of SESANS data.
373         - Hankel transformation now accepts finite acceptance angles.
374         - 2D cosine transformation added for TOF SESANS analysis.
375      - Documentation improvements
376         - The documentation tree was restructured for a better end user experience.
377         - The documentation for each model was revamped and verified by at least
378           two people following the conversion of the model.
379         - Theoretical 1D (and 2D if applicable) scattering curves are auto-generated
380           and added to the model documentation for each model.
381      - Separation of GUI and calculations for future GUI enhancements
382      - Bug fixes
383         - Fixes bug #411 No stop button on simultaneous fit page
384         - Fixes bug #410 Error with raspberry model
385         - Fixes bug #364 Possible inconsistency in Poly_GausCoil model
386         - Fixes bug #439 Hayter Penfold MSA code needs checking
387         - Fixes bug #484 lammellerPC is precision limited
388         - Fixes bug #498 $HOME/.matplotlib conflicts
389         - Fixes bug #348 Control order in which fit parameters appear in the gui
390         - Fixes bug #456 Provide DREAM Results Panel with something to identify
391           data and age of results
392         - Fixes bug #556 Build script improvements for developers
393
394
395
396   - New in Version 3.1.2
397     --------------------
398     This release is a major stability improvement, having fixed a serious bug
399     that came to light since release 3.1.1. All users should upgrade.
400
401     - Fixes bug #468 broken remove constraint buttons in
402       simultaneous/constrained fitting panel
403     - Fixes bug #474 resulting from changes in 3.1.1 that had
404       introduced an error in the high-Q of slit-smeared models.
405     - Fixes bug #478 which would cause wx to run out of IDs and result
406       in SasView crashing even if left alone.
407     - Fixes bug #479 missing help button on simultaneous/constrained fit page
408     - Fixes bug #480 GUI resizing issues on simultaneous fit page
409     - Fixes bug #486 broken Report Results
410     - Fixes bug #488 redraw issues in fit page
411
412
413
414   - New in Version 3.1.1
415     --------------------
416     - Fixes bug #457 that prevented SasView from starting if the user was not
417       connected to the internet, or was behind a proxy server.
418
419   - New in Version 3.1.0
420     --------------------
421     - The documentation/help has had a complete overhaul including:
422       - A completely new presentation interface (Sphinx).
423       - Proof reading!
424       - Updating for latest features.
425       - A Help (or sometimes ?) button has been added to every panel, and some
426         sub panels if appropriate, linking to the appropriate section in the
427         documentation.
428       - The model help has been split so that the Details button now brings up
429         a very short pop-up giving the equation being used while HELP goes to
430         the section in the full documentation describing the model.
431       - Extensive help has also been added for the new optimizer engine (see
432         below) including rules of thumb on how and when to choose a given
433         optimizer and what the parameters do.
434     - The optimizer engine has been completely replaced. The new optimizer
435       still defaults to the standard Levenberg-Marquardt algorithm. However 4
436       other optimizers are now also available. Each starts with a set of default
437       parameters which can be tuned. The DREAM optimizer takes the longest but
438       is the most powerful and yields rich information including full parameter
439       correlation and uncertainty plots. A results panel has been added to
440       accommodate this.
441       - The five new optimizers are:
442         - A Levenberg-Marquardt optimizer
443         - A Quasi-Newton BFGS optimizer
444         - A Nelder-Mead Simplex optimizer
445         - A Differential Evolution optimizer
446         - A Monte Carlo optimizer (DREAM)
447     - New models were added:
448         - MicelleSphCoreModel (currently residing in the Uncategorized category)
449     - Existing models were updated:
450         - LamellarPS (bug in polydispersity integration fixed)
451         - RectangularPrismModel
452         - RectangularHollowPrismModel
453         - RectangularHollowPrismInfThinWallsModel
454     - Infrastructure to allow SESANS data to be fit with models was added. This
455       will become available in a future release but can currently be used from
456       the command line with some caveats.
457     - A number of bugs were fixed including a thread crashing issue and an
458       incorrect slit smearing resolution calculation.
459     - Implemented much more robust error logging to enable much easier
460       debugging in general but particularly the debugging of issues reported by
461       SasView users.
462     - A number of infrastructure tasks under the hood to enhance maintainability
463     - Upgrade from Wx 2.8 to Wx 3.0.2 which allows several new features but
464       required significant additional rework as well.
465     - Fully implemented Sphinx to the build process to produce both better
466       user documentation and developer documentation.
467     - Restructuring of the code base to more unified nomenclature and structure
468       so that the source installation tree more closely matches the installer
469       version tree.
470     - Code cleanup (an ongoing task) .
471     - Migration of the repository to github simplifying contributions from
472       non-project personnel through pull requests.
473
474   - New in Version 3.0.0
475     --------------------
476     - The GUI look and feel has been refactored to be more familiar for
477       Windows users by using MDI frames. Graph windows are also now free-
478       floating.
479     - Five new models have been added: PringlesModel, CoreShellEllipsoidXTModel,
480       RectangularPrismModel, RectangularHollowPrismModel and
481       RectangularHollowPrismInfThinWallsModel.
482     - The data loader now supports ILL DAT data files and reads the full meta
483       information from canSAS file formats.
484     - Redefined convention for specifying angular parameters for anisotropic
485       models.
486     - A number of minor features have been added such as permitting a log
487       distribution of points when using a model to simulate data, and the
488       addition of a Kratky plot option to the linear plots.
489     - A number of bugs have also been fixed.
490     - Save Project and Save Analysis now work more reliably.
491     - BETA: Magnetic contrast supporting full polarization analysis has been
492       implemented for some spherical and cylindrical models.
493     - BETA: Two new tools have been added:
494       - A generic scattering calculator which takes an atomic, magnetic or
495         SLD distribution in space and generates the appropriate 2D
496         scattering pattern. In some cases the orientationally averaged
497         (powder) 1D scattering can also be computed. Supported formats
498         include: SLD or text, PDB, and OMF magnetic moment distribution
499         file.
500       - An image viewer/converter for data in image format; this reads in
501         an image file and will attempt to convert the image pixels to
502         data. Supported formats include: TIFF, TIF, PNG, BMP, JPG.
503
504   - New in Version 2.2.1
505     --------------------
506     - Minor patch to support CanSAS XML v1.1 file format
507     - Added DataInfo for data in the DataExplorer and plots
508     - Added Maximize/Restore button in the title bar of the graphs
509     - Added a hide button in the toolbar of the graph panel
510     - The 'x' button now deletes a graph
511     - Edit SUM Model from the menubar can now generate and save more than one sum model
512     - Reports can now be saved in pdf format on WIN and MAC
513     - Made significant improvements to the batch/grid panel and fixed several bugs
514     - Fixed a number of other minor bugs
515
516   - New in Version 2.2.0
517     --------------------
518     - Application name changed to SasView
519     - New fully customizable Category Manager added for better management of
520       increasing number of models
521     - Improved the Grid Window functionality in the batch fitting mode
522     - Added a simpler Graph/Plot modification interface
523     - Added a new 'Data Operation' tool for addition, subtraction, multiplication,
524       division, of two data sets.
525     - The 'Sum Model' editor was extended and renamed 'Summation and Multiplication'
526       editor
527     - Added more plot symbols options for 1d plots
528     - Added improved trapping of compiling errors to the 'New model editor'
529     - Added some intelligent outputs (e.g., Rg, background, or rod diameter
530       depending on the choice of axis scale of the plot) to the linear fits
531     - Added more models
532
533   - Feature set from previous versions
534     -----------------------------------
535     - Perspectives Available
536       - Invariant calculator: Calculates the invariant, volume fraction, and
537         specific surface area.
538       - P(r) inversion calculator: Indirect Fourier transformation method.
539       - Fitting: the tool used for modeling and fitting 1D and 2D data to
540         analytical model functions
541       - Tools: provides a number of useful supplementary tools such as SLD
542         calculation
543
544     - Fitting
545       - Includes a large number of model functions, both form factors and structure factors.
546       - Support P(Q)*S(Q) for form factors that flag they can be so multiplied.
547       - Supports Gaussian, lognormal, Shulz, rectangular and custom distribution
548         functions for models that need to include polydispersity or for orientational
549         distributions if appropriate.
550       - Anisotropic shapes and magnetic moment modeling in 2D allow for a non-uniform
551         distribution of orientations of a given axis leading to modeling and fitting
552         capabilities of non azimuthaly symmetric data.
553       - User can choose to weight fits or not. If using weights, the user can choose
554         the error bar on each point if provided in the file, the square root
555         of the intensity or the intensity itself.
556       - Instrumental resolution smearing of model or fits is provided with several
557         options: read the resolution/point fromt he file. Input a pinhole resolution
558         or a slit resolution.
559       - Users can define the Qrange (Qmin and Qmax) for both 1D and 2D data for
560         fitting and modeling, but not graphically.  The range can be reset to the
561         defaults (limits of q in data set for a fit) with the reset button.
562       - A mask can be applied to 2D calculation and fitting.
563       - Normalized residual plots are provided with every fit.
564       - Model function help available through detail button or from the fitting panel.
565       - Simultaneous/(advanced)constrained fitting allows for fitting a single
566         data set or several different sets simultaneously with the application
567         of advanced constraints relating fit parameters to functions of other
568         parameters (including from a different set). For example thickness of
569         shell = sin(30) times the length.
570       - Models that are the sum of two other models can be easily generated through the
571         SUM Model menubar item.
572       - New Python models can be added on the fly by creating an appropriate Python
573         file in the model plugin directory. Two tools are provided to help:
574         An easy to use custom model editor allows the quick generation of new Python
575         models by supplying only the parameters and their default value (box 1)
576         and the mathematical function of the model (box 2) and generating the
577         necessary *.py file.  A separate advanced model editor provides a full Python
578         file editor.  Either way once saved the model becomes immediately available
579         to the application.
580       - A batch fitting capability allows for the analysis of a series of data sets to
581         a single model and provides the results in a tabular form suitable for saving
582         or plotting the evolution of the fit parameters with error bars (from within
583         the application).
584
585     - Tools
586       - A scattering length density calculator,including some X-ray information
587         is provided.
588       - A density to vol. fraction converter is provided
589       - In application access to a Python shell/editor (PyCrust) is provided
590       - An instrument resolution calculator, including possible gravitational and
591         TOF effects is provided
592       - A slit size calculator optimized for Anton Paar Saxess is provided.
593       - A kiessig fringe thickness calculator is provided
594
595     - Plots and plot management
596       - A 3D graphing option (for 2d data/results) is provided with the view
597         controlled by the mouse
598       - 2D plots are shown with an intensity color bar. 2D Color map can be user
599         adjusted.
600       - Supports output of plot to a variety of graphic formats. Supported formats
601         include: png, eps, emf, jpg/jpeg, pdf, ps, tif/tiff, rawRGBbitmap(raw, rgba),
602         and scalable vector graphic (svg/svgz)
603       - Supports ouput of data in plot (1 or 2D) to limited data formats
604       - Multiple data sets can be loaded into a single graph for viewing (but a fit
605         plot can currently only have a single plot).
606       - Extensive context sensitive plot/fitting/manipulation options are available
607         through a right mouse click pop-up menu on plots.
608
609     - Data management
610       - Supports 2 + column 1D ASCII data, NIST 1D and 2D data, and canSAS data
611         via plug-in mechanism which can easily allow other readers as appropriate.
612       - 2D data is expected in Q space but for historical reasons accepts the
613         NIST 2D raw pixel format and will do conversion internally.
614       - The full data and metadata available to SasView is viewable in ASCII via
615         right clicking on a data set and choosing Data Info in the DataExplorer
616         or on the plots
617       - Supports loading a single file, multiple files, or a whole folder
618       - An optional Data Explorer is provided (default) which simplifies managing,
619         plotting, deleting, or setup for computation. Most functions however do
620         not require access to the explorer/manager and can be accessed through
621         right click menus and the toolbar.  The data explorer can be re-started
622         from the menu bar.
623
624     - Data manipulation
625       - Support various 2D averaging methods : Circular, sectors, annular,
626         boxsum, boxQx and boxQy.
627       - A 2D data maks editor is provided
628       - 2D mask can be applied to the circular averaging.
629
630     - Miscellaneous features
631       - limited reports can be generated in pdf format
632       - Provides multiprocessor support(Windows only)
633       - Limited startup customization currently includes default startup
634         data folder and choice of default starting with data manager
635       - Limited support for saving(opening) a SasView project or a SasView analysis
636         (subproject) is provided.
637       - SasView can be launched and loaded with a file of interesty by double-clicking
638         on that file (recognized extension)
639       - A data file or data folder can be passed to SasView when launched from
640         the command line.
641       - Limited bookmarking capability to later recall the results of a fit calculation
642         is provided.
643       - Extensive help is provided through context sensitive mouse roll-over,
644         information bar (at the bottom of the panel), the console menu, and
645         access to the help files in several different ways.
646
647
6482- Downloading and Installing
649=============================
650
651   *** Note 1:  If you have a SasView installer (.EXE or .MSI), you do not need to
652                worry about any of the following.  However, it is highly recommended
653                that any previous versions of SasView are uninstalled prior to
654                installing the new version UNLESS you are installing SasView to
655                versioned folders.
656
657   *** Note 2:  The easiest approach to setting up the proper environment to
658                build from source is to use Conda.  Instructions for setting up
659                and using Conda can be found at:
660                  http://trac.sasview.org/wiki/DevNotes/CondaDevSetup
661                   
662   *** Note 3:  Much more information is available at www.sasview.org under
663                links/downloads. In particular, look in the 'For Developers' section.
664                Also have a look at http://trac.sasview.org/.
665
666   2.1- System Requirements
667        - Python version >= 2.5 and < 3.0 should be running on the system
668        - We currently use Python 2.7
669
670   2.2- Package Dependencies
671        - Ensure the required dependencies are installed
672          - For the latest list of dependencies see the appropriate yml file in
673            the SasView repo at sasview/build_tools/conda/ymls
674
675   2.3- Installing from Source
676        - Get the source code
677          - create a folder to contain the source code; if working with
678            multiple versions you might want to use versioned folder names
679            like 'sasview-x.x.x'
680          - open a command line window in the source code folder
681          - to get the CURRENT DEVELOPMENT VERSION from source control use
682              git clone https://github.com/SasView/sasview.git sasview
683              git clone https://github.com/Sasview/sasmodels.git sasmodels
684              git clone https://github.com/bumps/bumps.git bumps
685          - to get a SPECIFIC RELEASE VERSION from source control go to
686              https://github.com/SasView/sasview/releases
687            and download the required zip or tar.gz file. Unzip/untar it
688            to the source code folder.
689
690   2.4- Building and Installing         
691        - use 'python setup.py build'
692        - use 'python setup.py install'
693        To build the documentation
694          - use'python setup.py docs'
695
696   2.5- Running SasView
697          - use 'python run.py'; this runs from the source directories, so you
698            don't have to rebuild every time you make a change, unless you are
699            changing the C model files.
700          - if using Conda the above command will also build SasView, but you
701            must issue 'activate sasview' first.
702
703
7043- Known Issues
705===============
706
707   4.2.0 - All systems
708      There are currently no major known issues. A full list of known bugs and
709      feature requests by release version that users may wish to be aware of
710      can be viewed at http://trac.sasview.org/report/3
711      NOTE: Any corrections to models that may become known/available will be
712      posted to Marketplace as available (and fixed in the following release)
713
714   4.1- All systems:
715      The conversion to sasmodels infrastructure is ongoing and should be
716      completed in the next release. In the meantime this leads to a few known
717      issues:
718        - The way that orientation is defined is being refactored to address
719          long standing issues and comments.  In release 4.1 however only models
720          with symmetry (e.g. a=b) have been converted to the new definitions.
721          The rest (a <> b <> c - e.g. parellelepiped) maintain the same
722          definition as before and will be converted in 4.2.  Note that
723          orientational distribution also makes much more sense in the new
724          framework.  The documentation should indicate which definition is being
725          used for a given model.
726        - The infrastructure currently handles internal conversion of old style
727          models so that user created models in previous versions should continue
728          to work for now. At some point in the future such support will go away.
729          Everyone is encouraged to convert to the new structure which should be
730          relatively straight forward and provides a number of benefits.
731        - In that vein, the distributed models and those generated by the new
732          plugin model editor are in the new format, however those generated by
733          sum|multiply models are the old style sum|multiply models. This should
734          also disappear in the near future
735        - The on the fly discovery of plugin models and changes thereto behave
736          inconsistently.  If a change to a plugin model does not seem to
737          register, the Load Plugin Models (under fitting -> Plugin Model
738          Operations) can be used.  However, after calling Load Plugin Models, the
739          active plugin will no longer be loaded (even though the GUI looks like
740          it is) unless it is a sum|multiply model which works properly.  All
741          others will need to be recalled from the model dropdown menu to reload
742          the model into the calculation engine.  While it might be annoying it
743          does not appear to prevent SasView from working..
744        - The model code and documentation review is ongoing. At this time the
745          core shell parellelepiped is known to have the C shell effectively fixed
746          at 0 (noted in documentation) while the triaxial ellipsoid does not seem
747          to reproduce the limit of the oblate or prolate ellipsoid. If errors are
748          found and corrected, corrected versions will be uploaded to the
749          marketplace.
750
751   3.1- All systems:
752        - The documentation window may take a few seconds to load the first time
753          it is called. Also, an internet connection is required before
754          equations will render properly. Until then they will show in their
755          original TeX format.
756        - If the documentation window remains stubbornly blank, try installing a
757          different browser and set that as your default browser. Issues have
758          been noted with Internet Explorer 11.
759        - Check for Updates may fail (with the status bar message ' Cannot
760          connect to the application server') if your internet connection uses
761          a proxy server. Tested resolutions for this are described on the
762          website FAQ.
763        - The copy and paste functions (^C, ^V) in the batch mode results grid
764          require two clicks: one to select the cell and a second to select the
765          contents of the cell.
766        - The tutorial has not yet been updated and is somewhat out of date
767        - Very old computers may struggle to run the 3.x and later releases
768        - Polydispersity on multiple parameters included in a simultaneous/
769          constrained fit will likely not be correct
770        - Constrained/simultaneous fit page does not have a stop button
771        - Constrained/simultaneous fit do not accept min/max limits
772        - Save project does not store the state of all the windows
773        - Loading projects can be very slow
774        - Save Project only works once a data set has been associated with
775          a model.  Error is reported on status bar.
776        - There is a numerical precision problem with the multishell model when
777          the iner radius gets large enough (ticket #288)
778        - The angular distribution angles are not clearly defined and may in
779          some cases lead to incorrect calculations(ticket #332)
780
781   3.2- Windows:
782        - If installed to same directory as old version without first removing
783          the old version, the old desktop icon will remain but point to the
784          new exe version. Likewise all the start menu folders and items will
785          have the old name even though pointing to the new version.  Usually
786          safest to uninstall old version prior to installing new version anyway.
787
788   3.3- MAC:
789        - Application normally starts up hidden. Click icon in Dock to view/use
790          application.
791        - Multiprocessing does not currently work on MAC OS
792
793   3.4- Linux:
794        - Not well tested
795
796
7974- SasView website
798==================
799
800   - www.sasview.org.  This main project site is the gateway to all
801     information about the sasview project.  It includes information
802     about the project, a FAQ page and links to all developer and user
803     information, tools and resources.
804
805
8065- Frequently Asked Questions
807=============================
808
809   - www.sasview.org/faq.html
810
811
8126- Installer download website
813=============================
814
815   - Latest release Version
816     - https://github.com/SasView/sasview/releases
817   - Latest developer builds
818     - https://jenkins.esss.dk/sasview/view/Master-Builds/
Note: See TracBrowser for help on using the repository browser.