source: sasview/guiframe/local_perspectives/plotting/SectorSlicer.py @ 247cb58

#TODO: the line slicer should listen to all 2DREFRESH events, get the data and slice it
#      before pushing a new 1D data update.

#
#TODO: NEED MAJOR REFACTOR
#


# Debug printout
import math
import wx
from copy import deepcopy

from BaseInteractor import _BaseInteractor
from sans.guicomm.events import NewPlotEvent, StatusEvent
from sans.guicomm.events import SlicerParameterEvent,EVT_SLICER_PARS

from sans.guiframe.dataFitting import Data1D

class SectorInteractor(_BaseInteractor):
    """
         Draw a sector slicer.Allow to performQ averaging on data 2D
    """
    def __init__(self,base,axes,color='black', zorder=3):
        
        _BaseInteractor.__init__(self, base, axes, color=color)
        ## Class initialization
        self.markers = []
        self.axes = axes   
        ## connect the plot to event 
        self.connect = self.base.connect
        
        ## compute qmax limit to reset the graph     
        x = math.pow(max(self.base.data2D.xmax,math.fabs(self.base.data2D.xmin)),2)
        y = math.pow(max(self.base.data2D.ymax,math.fabs(self.base.data2D.ymin)),2)
        self.qmax= math.sqrt(x + y)
        ## Number of points on the plot
        self.nbins = 20
        ## Angle of the middle line
        self.theta2= math.pi/3
        ## Absolute value of the Angle between the middle line and any side line
        self.phi=math.pi/12
        
        ## Middle line
        self.main_line = LineInteractor(self, self.base.subplot,color='blue', zorder=zorder, r=self.qmax,
                                           theta= self.theta2)
        self.main_line.qmax = self.qmax
        ## Right Side line
        self.right_line= SideInteractor(self, self.base.subplot,color='black', zorder=zorder,
                                     r=self.qmax,
                                           phi= -1*self.phi,
                                           theta2=self.theta2)
        self.right_line.qmax = self.qmax
        ## Left Side line 
        self.left_line= SideInteractor(self, self.base.subplot,color='black', zorder=zorder,
                                     r=self.qmax,
                                           phi= self.phi,
                                           theta2=self.theta2)
        self.left_line.qmax = self.qmax
        ## draw the sector               
        self.update()
        self._post_data()

        ## Bind to slice parameter events
        self.base.Bind(EVT_SLICER_PARS, self._onEVT_SLICER_PARS)


    def _onEVT_SLICER_PARS(self, event):
        """
            receive an event containing parameters values to reset the slicer
            @param event: event of type SlicerParameterEvent with params as 
            attribute
        """
        wx.PostEvent(self.base.parent, StatusEvent(status="SectorSlicer._onEVT_SLICER_PARS"))
        event.Skip()
        if event.type == self.__class__.__name__:
            self.set_params(event.params)
            self.base.update()


    def set_layer(self, n):
        """
             Allow adding plot to the same panel
             @param n: the number of layer
        """
        self.layernum = n
        self.update()
        
        
    def clear(self):
        """
            Clear the slicer and all connected events related to this slicer
        """
        self.clear_markers()
        self.main_line.clear()
        self.left_line.clear()
        self.right_line.clear()
        self.base.connect.clearall()
        self.base.Unbind(EVT_SLICER_PARS)
        
        
    def update(self):
        """
            Respond to changes in the model by recalculating the profiles and
            resetting the widgets.
        """
        # Update locations  
        ## Check if the middle line was dragged and update the picture accordingly     
        if self.main_line.has_move:
            self.main_line.update()
            self.right_line.update( delta= -self.left_line.phi/2,
                                    mline= self.main_line.theta )
            self.left_line.update( delta = self.left_line.phi/2,
                                   mline= self.main_line.theta )
        ## Check if the left side has moved and update the slicer accordingly  
        if self.left_line.has_move:
            self.main_line.update()
            self.left_line.update( phi=None, delta=None, mline=self.main_line ,
                                  side=True, left=True )
            self.right_line.update( phi= self.left_line.phi, delta= None,
                                     mline= self.main_line, side= True,
                                     left=False, right= True )
        ## Check if the right side line has moved and update the slicer accordingly
        if self.right_line.has_move:
            self.main_line.update()
            self.right_line.update( phi=None, delta=None, mline=self.main_line,
                                   side=True, left=False, right=True )
            self.left_line.update( phi=self.right_line.phi, delta=None,
                                    mline=self.main_line, side=True, left=False )


    def save(self, ev):
        """
        Remember the roughness for this layer and the next so that we
        can restore on Esc.
        """
        self.base.freeze_axes()
        self.main_line.save(ev)
        self.right_line.save(ev)
        self.left_line.save(ev)

    def _post_data(self, nbins=None):
        """
            compute sector averaging of data2D into data1D
            @param nbins: the number of point to plot for the average 1D data
        """
        ## get the data2D to average
        data = self.base.data2D
        # If we have no data, just return
        if data == None:
            return
        ## Averaging
        from DataLoader.manipulations import SectorQ
        radius = self.qmax 
        phimin =  -self.left_line.phi + self.main_line.theta
        phimax = self.left_line.phi + self.main_line.theta
       
        if nbins==None:
            nbins = 20
        sect = SectorQ(r_min= 0.0, r_max= radius ,
                        phi_min= phimin + math.pi,
                        phi_max= phimax + math.pi, nbins=nbins)
     
        sector = sect(self.base.data2D)
        ##Create 1D data resulting from average
       
        if hasattr(sector,"dxl"):
            dxl= sector.dxl
        else:
            dxl= None
        if hasattr(sector,"dxw"):
            dxw= sector.dxw
        else:
            dxw= None
       
        new_plot = Data1D(x=sector.x,y=sector.y,dy=sector.dy)
        new_plot.dxl = dxl
        new_plot.dxw = dxw
        new_plot.name = "SectorQ" +"("+ self.base.data2D.name+")"
        
        new_plot.source=self.base.data2D.source
        #new_plot.info=self.base.data2D.info
        new_plot.interactive = True
        new_plot.detector =self.base.data2D.detector
        # If the data file does not tell us what the axes are, just assume...
        new_plot.xaxis("\\rm{Q}", 'A^{-1}')
        new_plot.yaxis("\\rm{Intensity} ","cm^{-1}")
        new_plot.group_id = "SectorQ"+self.base.data2D.name
        new_plot.id = "SectorQ"+self.base.data2D.name
        new_plot.is_data= True
        wx.PostEvent(self.base.parent, NewPlotEvent(plot=new_plot,
                                                 title="SectorQ"+self.base.data2D.name ))
        
         
        
    def moveend(self, ev):
        """
            Called a dragging motion ends.Get slicer event 
        """
        self.base.thaw_axes()
        ## Post parameters
        event = SlicerParameterEvent()
        event.type = self.__class__.__name__
        event.params = self.get_params()
        ## Send slicer paramers to plotter2D
        wx.PostEvent(self.base, event)
        #self._post_data()
            
            
    def restore(self):
        """
        Restore the roughness for this layer.
        """
        self.main_line.restore()
        self.left_line.restore()
        self.right_line.restore()

    def move(self, x, y, ev):
        """
        Process move to a new position, making sure that the move is allowed.
        """
        pass
        
        
    def set_cursor(self, x, y):
        pass
        
        
    def get_params(self):
        """
            Store a copy of values of parameters of the slicer into a dictionary.
            @return params: the dictionary created
        """
        params = {}
        ## Always make sure that the left and the right line are at phi 
        ## angle of the middle line
        if math.fabs(self.left_line.phi) != math.fabs(self.right_line.phi):
            raise ValueError,"Phi left and phi right are different %f, %f"%(self.left_line.phi, self.right_line.phi)
        
        params["Phi"] = self.main_line.theta
        params["Delta_Phi"] = math.fabs(self.left_line.phi)
        params["nbins"] = self.nbins
        return params
    
    
    def set_params(self, params):
        """
            Receive a dictionary and reset the slicer with values contained 
            in the values of the dictionary.
            @param params: a dictionary containing name of slicer parameters and 
            values the user assigned to the slicer.
        """
        main = params["Phi"] 
        phi = math.fabs(params["Delta_Phi"] )
        self.nbins = int(params["nbins"])
        self.main_line.theta= main
        ## Reset the slicer parameters
        self.main_line.update()
        self.right_line.update( phi=phi,delta=None, mline=self.main_line,
                               side=True, right=True )
        self.left_line.update( phi=phi, delta=None, mline=self.main_line, side=True )
        ## post the new corresponding data
        self._post_data(nbins=self.nbins)
        
        
    def freeze_axes(self):
        self.base.freeze_axes()
        
        
    def thaw_axes(self):
        self.base.thaw_axes()


    def draw(self):
        self.base.draw()

        
class SideInteractor(_BaseInteractor):
    """
        Draw an oblique line
        @param phi: the phase between the middle line and one side line
        @param theta2: the angle between the middle line and x- axis
    """
    def __init__(self,base,axes,color='black', zorder=5, r=1.0,phi=math.pi/4, theta2= math.pi/3):
        
        _BaseInteractor.__init__(self, base, axes, color=color)
        ## Initialize the class
        self.markers = []
        self.axes = axes
        ## compute the value of the angle between the current line and
        ## the x-axis  
        self.save_theta = theta2 + phi
        self.theta= theta2 + phi
        ## the value of the middle line angle with respect to the x-axis
        self.theta2 = theta2
        ## Radius to find polar coordinates this line's endpoints
        self.radius = r
        ## phi is the phase between the current line and the middle line
        self.phi = phi
        
        ## End points polar coordinates
        x1= self.radius*math.cos(self.theta)
        y1= self.radius*math.sin(self.theta)
        x2= -1*self.radius*math.cos(self.theta)
        y2= -1*self.radius*math.sin(self.theta)
        ## defining a new marker 
        try:
            self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
                                          marker='s', markersize=10,
                                          color=self.color, alpha=0.6,
                                          pickradius=5, label="pick", 
                                          zorder=zorder, # Prefer this to other lines
                                          visible=True)[0]
        except:
            self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
                                          marker='s', markersize=10,
                                          color=self.color, alpha=0.6,
                                          label="pick", 
                                          visible=True)[0]
            message  = "\nTHIS PROTOTYPE NEEDS THE LATEST VERSION OF MATPLOTLIB\n"
            message += "Get the SVN version that is at least as recent as June 1, 2007"
            owner=self.base.base.parent
            wx.PostEvent(owner, StatusEvent(status="sectorSlicer: %s"%message))
        
        ## Defining the current line
        self.line = self.axes.plot([x1,x2],[y1,y2],
                                      linestyle='-', marker='',
                                      color=self.color,
                                      visible=True)[0]
        ## Flag to differentiate the left line from the right line motion
        self.left_moving=False
        ## Flag to define a motion
        self.has_move=False
        ## connecting markers and draw the picture
        self.connect_markers([self.inner_marker, self.line])
       

    def set_layer(self, n):
        """
             Allow adding plot to the same panel
             @param n: the number of layer
        """
        self.layernum = n
        self.update()
        
    def clear(self):
        """
            Clear the slicer and all connected events related to this slicer
        """
        self.clear_markers()
        try:
            self.line.remove()
            self.inner_marker.remove()
        except:
            # Old version of matplotlib
            for item in range(len(self.axes.lines)):
                del self.axes.lines[0]
        
        
    def update(self, phi=None, delta=None, mline=None,
               side=False, left= False, right=False):
        """
            Draw oblique line
            @param phi: the phase between the middle line and the current line
            @param delta: phi/2 applied only when the mline was moved
        """
        #print "update left or right ", self.has_move
        self.left_moving=left
        theta3=0
        if phi !=None:
            self.phi= phi
        if delta==None:
            delta = 0

        if  right:
            self.phi = -1*math.fabs(self.phi)
            #delta=-delta
        else:
            self.phi =math.fabs(self.phi)
        if side:
            self.theta=  mline.theta + self.phi
                    
        if mline!=None :
            if delta!=0:
                self.theta2 = mline+delta
            else:
                self.theta2 = mline.theta
        if delta==0:
            theta3=self.theta+delta
        else:
            theta3=self.theta2+delta
        
      
        x1= self.radius*math.cos(theta3)
        y1= self.radius*math.sin(theta3)
        x2= -1*self.radius*math.cos(theta3)
        y2= -1*self.radius*math.sin(theta3)
       
        self.inner_marker.set(xdata=[x1/2.5],ydata=[y1/2.5])
        self.line.set(xdata=[x1,x2], ydata=[y1,y2])  
        
       
        
        
    def save(self, ev):
        """
        Remember the roughness for this layer and the next so that we
        can restore on Esc.
        """
        self.save_theta= self.theta
        self.base.freeze_axes()

    def moveend(self, ev):
        
        self.has_move=False
        self.base.moveend(ev)
            
    def restore(self):
        """
        Restore the roughness for this layer.
        """
        self.theta = self.save_theta

    def move(self, x, y, ev):
        """
        Process move to a new position, making sure that the move is allowed.
        """
        
        self.theta= math.atan2(y,x)
        self.has_move=True
        #ToDo: Simplify below
        if not self.left_moving:
            if  self.theta2-self.theta <= 0 and self.theta2>0:#>= self.theta2:
                #print "my theta", self.theta
                self.restore()
                return 
            elif self.theta2 < 0 and self.theta < 0 and self.theta-self.theta2 >= 0:
                self.restore()
                return                             
            elif  self.theta2 < 0 and self.theta > 0 and self.theta2+2*math.pi-self.theta >=math.pi/2:
                #print "my theta", self.theta
                self.restore()
                return 
            elif  self.theta2 < 0 and self.theta < 0 and self.theta2-self.theta >=math.pi/2:
                #print "my theta", self.theta
                self.restore()
                return 
            elif self.theta2>0 and (self.theta2-self.theta >= math.pi/2 or (self.theta2-self.theta >= math.pi/2)):#<= self.theta2 -math.pi/2:
                #print "self theta encore"
                self.restore()
                return 
        else:
            #print "left move"
            if  self.theta < 0 and self.theta+math.pi*2-self.theta2 <= 0:
                self.restore()
                return 
            elif self.theta2 < 0 and self.theta-self.theta2 <= 0:
                self.restore()
                return                             
            elif  self.theta > 0 and self.theta-self.theta2 <=0:
                #print "my theta", self.theta
                self.restore()
                return 
            elif self.theta-self.theta2 >= math.pi/2 or  (self.theta+math.pi*2-self.theta2 >= math.pi/2 and self.theta<0 and self.theta2>0):
                #print "self theta encore"
                self.restore()
                return 
            
        self.phi= math.fabs(self.theta2 - self.theta)
        if self.phi>math.pi:
            self.phi= 2*math.pi-math.fabs(self.theta2 - self.theta)
        
        #print "move , self.phi, self.theta,", self.theta*180/math.pi,self.theta2*180/math.pi,self.phi*180/math.pi
       
            
        
        self.base.base.update()
        
    def set_cursor(self, x, y):
        self.move(x, y, None)
        self.update()
        
        
    def get_params(self):
        params = {}
        params["radius"] = self.radius
        params["theta"] = self.theta
        return params
    
    def set_params(self, params):

        x = params["radius"] 
        self.set_cursor(x, self._inner_mouse_y)
        
 
        
class LineInteractor(_BaseInteractor):
    """
         Select an annulus through a 2D plot
    """
    def __init__(self,base,axes,color='black', zorder=5, r=1.0,theta=math.pi/4):
        
        _BaseInteractor.__init__(self, base, axes, color=color)
        self.markers = []
        self.axes = axes
        
        self.save_theta = theta 
        self.theta= theta
        
        self.radius = r
      
        self.scale = 10.0
      
        #raise "Version error", message
            
        # Inner circle
        x1= self.radius*math.cos(self.theta)
        y1= self.radius*math.sin(self.theta)
        x2= -1*self.radius*math.cos(self.theta)
        y2= -1*self.radius*math.sin(self.theta)
        try:
            # Inner circle marker
            self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
                                          marker='s', markersize=10,
                                          color=self.color, alpha=0.6,
                                          pickradius=5, label="pick", 
                                          zorder=zorder, # Prefer this to other lines
                                          visible=True)[0]
        except:
            self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
                                          marker='s', markersize=10,
                                          color=self.color, alpha=0.6,
                                          label="pick", 
                                          visible=True)[0]
            message  = "\nTHIS PROTOTYPE NEEDS THE LATEST VERSION OF MATPLOTLIB\n"
            message += "Get the SVN version that is at least as recent as June 1, 2007"
            
       
        self.line = self.axes.plot([x1,x2],[y1,y2],
                                      linestyle='-', marker='',
                                      color=self.color,
                                      visible=True)[0]
      
        self.npts = 20
        self.has_move=False
        self.connect_markers([self.inner_marker, self.line])
        self.update()

    def set_layer(self, n):
        self.layernum = n
        self.update()
        
    def clear(self):
        self.clear_markers()
        try:
            self.inner_marker.remove()
            self.line.remove()
        except:
            # Old version of matplotlib
            for item in range(len(self.axes.lines)):
                del self.axes.lines[0]
  
  
    def update(self, theta=None):
        """
        Draw the new roughness on the graph.
        """
       
        if theta !=None:
            self.theta= theta
        x1= self.radius*math.cos(self.theta)
        y1= self.radius*math.sin(self.theta)
        x2= -1*self.radius*math.cos(self.theta)
        y2= -1*self.radius*math.sin(self.theta)
        
        self.inner_marker.set(xdata=[x1/2.5],ydata=[y1/2.5])
        self.line.set(xdata=[x1,x2], ydata=[y1,y2])  
     
        
        
    def save(self, ev):
        """
        Remember the roughness for this layer and the next so that we
        can restore on Esc.
        """
        self.save_theta= self.theta
        self.base.freeze_axes()

    def moveend(self, ev):
        
        self.has_move=False
        self.base.moveend(ev)
            
    def restore(self):
        """
        Restore the roughness for this layer.
        """
        self.theta = self.save_theta

    def move(self, x, y, ev):
        """
        Process move to a new position, making sure that the move is allowed.
        """
        
        self.theta= math.atan2(y,x)
        #print "main_line previous theta --- next theta ",math.degrees(self.save_theta),math.degrees(self.theta)
        
        self.has_move=True
        
        self.base.base.update()
        
    def set_cursor(self, x, y):
        self.move(x, y, None)
        self.update()
        
        
    def get_params(self):
        params = {}
        params["radius"] = self.radius
        params["theta"] = self.theta
        return params
    
    def set_params(self, params):

        x = params["radius"] 
        self.set_cursor(x, self._inner_mouse_y)