Custom Query (157 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:

Results (1 - 100 of 157)

1 2 →
Ticket Summary Status Owner Type Priority Milestone
#350 resolution for SESANS model new enhancement minor SasView Next Release +1
#351 SESANS for anistropic scattering new enhancement minor SasView Next Release +1
#396 allow density from formula in sld calculator new defect minor SasView Next Release +1
#413 entropy calculation requires scikit learn package new defect minor SasView Next Release +1
#437 add correlation coefficient to the correlation plot new enhancement minor SasView 5.1.0
#477 allow user defined models to set there own html markup on units new enhancement minor SasView Next Release +1
#481 support polydispersity for integer parameters (e.g., pearl necklace) new defect minor SasView Next Release +1
#482 better support for integer parameters in fit new defect minor SasView 4.3.0
#495 singular covariance matrices give traceback error for dream/amoeba/newton new defect minor SasView 4.3.0
#560 extend core multi-shell model to support spline functions. new enhancement minor SasView Next Release +1
#562 fix handling of q==0 for various models new defect minor SasView Next Release +1
#563 numerical derivative step size is precision dependent new defect minor SasView Next Release +1
#568 custom models should use Iq(q, ...) and Iqxy(qx, qy, ...) new defect minor SasView Next Release +1
#573 error traceback unreadable new defect minor SasView 5.0.0
#574 make model help available for custom models new enhancement minor SasView Next Release +1
#575 run custom model tests when checking model new enhancement minor SasView Next Release +1
#577 support simultaneous install of different versions new enhancement minor SasView Next Release +1
#578 allow parallel fitting if multiple gpus new defect minor SasView Next Release +1
#584 use embedded svg for saved html reports new enhancement minor SasView 5.0.0
#620 scroll wheel should scroll the fit page new defect minor SasView 5.0.0
#640 model not recalculated when enter pressed in min/max new defect minor SasView 5.0.0
#660 Add GUI triggers for compare, docview and user tests from the plugin editor. new defect minor SasView 5.0.0
#671 use cleaner representation of resolution in save files new enhancement minor SasView 5.0.0
#715 resolution calculation does not check for basis of support between q points new defect minor SasView 4.3.0
#782 Performance tuning for 2D calculations new enhancement minor sasmodels WishList
#783 Performance tuning for 1D calculations new enhancement minor sasmodels WishList
#787 models with the same name in different directories will not be distinguished assigned butler defect minor SasView 4.3.0
#790 provide single and double precision versions of special functions new defect minor SasView Next Release +1
#808 view_html failing in the release bundle new defect minor SasView Next Release +1
#842 allow specification of single and double precision opencl device new defect minor SasView 4.3.0
#857 warn when model is outside valid range of q or parameters new enhancement minor SasView Next Release +1
#860 latex labels in graph menus new defect minor SasView 5.0.0
#867 Use integer number of branches for star polymer new defect minor SasView 4.3.0
#879 default value and limits are ignored for muliplicity/variant models new defect minor SasView 5.0.0
#972 explore -cl-uniform-work-group-size compiler option new defect minor SasView WishList
#973 sticky hard sphere fails for q<epsilon new defect minor SasView 4.3.0
#977 Don't use \text in equations new defect minor SasView 4.3.0
#981 binary_hard_sphere fails for small qr new defect minor SasView 4.3.0
#982 random model generation needed for rpa, spherical_sld and onion new defect minor SasView Next Release +1
#987 elliptical cylinder for axis ratio < 1 new enhancement minor SasView 4.3.0
#997 save points as file from graph loses precision new defect minor SasView 5.0.0
#1001 allow mixtures with some components being P*S new defect minor SasView Next Release +1
#1005 move model-specific conversion code into the model files new enhancement minor SasView 4.3.0
#1031 copy dollar math sphinx extension from sasmodels when building docs new enhancement minor SasView 5.0.0
#1033 add tests for generic scattering calculator new defect minor SasView 5.0.0
#1036 update tests for bcc/fcc paracrystal and core shell parallelepiped new defect minor SasView 4.3.0
#1040 resolution documentation is in two places new enhancement minor sasmodels 1.0
#1041 multiplicity not included in copy/paste parameters new defect minor SasView 5.0.0
#1042 add test for bsl file converter new defect minor SasView 5.0.0
#1051 use same markup language for trac and github new enhancement minor SasView 4.3.0
#1075 speed improvement for 2d fits new enhancement minor SasView 4.3.0
#1077 model name must be a valid C identifier new defect minor sasmodels 1.0
#1088 duplicate parameters in save project files when toggling fit new defect minor SasView 4.3.0
#1089 2D resolution accuracy setting not preserved on save/load project new defect minor SasView 4.3.0
#1090 fit page is missing from SASentry for simultaneous fits to the same file new defect minor SasView 4.3.0
#1097 re-enable enumerated choice parameters for models new defect minor SasView 5.0.0
#1098 rename tinycc repo to pytcc new defect minor SasView 4.3.0
#1100 OpenMP is turned off in unix new defect minor sasmodels Next Release +1
#1138 refactor environment variables new enhancement minor SasView 4.3.0
#1151 Add pivot point to power law model to reduce parameter correlations new enhancement minor SasView Next Release +1
#1159 C compiler ignores environment variables set in python new defect minor SasView 4.3.0
#1177 array distribution not respecting hard limits on parameter new defect minor SasView Next Release +1
#1182 python old buffer interface deprecated in python 3 new defect minor SasView 5.0.0
#1207 don't create .pyc files in ~/.sasview new defect minor SasView 4.3.0
#1216 attribute checking in model definition file new enhancement minor SasView 4.3.0
#1217 simplify models produced by Sum/Multiply new defect minor SasView 4.3.0
#1249 use backslash correctly in strings new defect minor SasView 4.3.0
#238 Data objects should be independent of gui new defect major SasView 5.0.0
#342 analytical models for sesans new enhancement major SasView Next Release +1
#346 SESANS into GUI Design assigned ajj enhancement major SasView Next Release +1
#352 SESANS with finite acceptance angles new enhancement major SasView Next Release +1
#392 use adaptive integration in sasmodels new enhancement major SasView Next Release +1
#425 allow constraints on batch fits new enhancement major SasView Next Release +1
#426 add inequality constraints assigned awashington enhancement major SasView Next Release +1
#523 add list of currently used parameters to the sasmodels developer docs new enhancement major SasView Next Release +1
#527 convert sld2i to opencl new defect major SasView Next Release +1
#558 set reasonable min/max on polydispersity values for fit new defect major SasView 5.0.0
#570 better custom model error diagnostics new defect major SasView Next Release +1
#571 better support for custom model editing new enhancement major SasView 5.1.0
#587 Refactor sum/product model new enhancement major SasView Next Release +1
#608 user defined distribution functions new enhancement major SasView 5.1.0
#609 parameter consistency check new enhancement major SasView Next Release +1
#610 oriented USANS measurements new enhancement major SasView Next Release +1
#611 more typical C code for kernels new enhancement major SasView WishList
#612 interrupt long C model evaluations new enhancement major SasView Next Release +1
#613 fixed parameters in sasmodels new enhancement major SasView 4.3.0
#670 allow multiple array dispersity parameters new defect major sasmodels Next Release +1
#679 Allow kernels to use global working memory new enhancement major SasView Next Release +1
#716 reuse computed I(qx,qy) values when computing 2D resolution new enhancement major sasmodels 1.0
#717 calculate all I(q) values needed for 1D resolution in one call new defect major SasView Next Release +1
#764 redefine rectangular distribution parameters new defect major SasView 4.3.0
#780 let the user set effective radius in P(Q)*S(Q) new enhancement major SasView Next Release +1
#788 cross check different implementations of the same shape new task major SasView 4.3.0
#791 make fractal a structure factor model new enhancement major SasView 4.3.0
#796 Polydispersity limited to 4 dimensions new enhancement major SasView Next Release +1
#799 Warn users if they are asking DREAM for too many samples assigned ajj enhancement major SasView 5.0.0
#805 improve accuracy of fcc/bcc/sc new defect major SasView 4.3.0
#806 clean separation between sasmodels and sasview accepted tim enhancement major SasView 4.3.0
#828 Fix tests for oriented 2D models for new orientation defintion assigned richardh defect major SasView 4.3.0
#846 set theory and data to same vmin/vmax when plotting 2D data new defect major SasView 5.0.0
1 2 →
Note: See TracQuery for help on using queries.