# # ChangeLog for sasmodels/models/triaxial_ellipsoid.py in sasmodels # # Generated by Trac 1.0.1 # Apr 26, 2024 2:10:25 AM Mon, 25 Mar 2019 18:04:23 GMT smk78 [0507e09] * sasmodels/models/_spherepy.py (modified) * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/correlation_length.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/peak_lorentz.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/porod.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/spinodal.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/two_power_law.py (modified) * sasmodels/models/unified_power_Rg.py (modified) * sasmodels/models/vesicle.py (modified) Added link to source code to each model. Closes #883 Wed, 20 Mar 2019 23:03:50 GMT Paul Kienzle [b297ba9] * extra/pylint.rc (modified) * sasmodels/bumps_model.py (modified) * sasmodels/compare.py (modified) * sasmodels/convert.py (modified) * sasmodels/core.py (modified) * sasmodels/data.py (modified) * sasmodels/details.py (modified) * sasmodels/direct_model.py (modified) * sasmodels/generate.py (modified) * sasmodels/gengauss.py (modified) * sasmodels/guyou.py (modified) * sasmodels/jitter.py (modified) * sasmodels/kernel.py (modified) * sasmodels/kernelcl.py (modified) * sasmodels/kernelcuda.py (modified) * sasmodels/kerneldll.py (modified) * sasmodels/kernelpy.py (modified) * sasmodels/list_pars.py (modified) * sasmodels/mixture.py (modified) * sasmodels/model_test.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/_spherepy.py (modified) * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/peak_lorentz.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/porod.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/spinodal.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/two_power_law.py (modified) * sasmodels/models/unified_power_Rg.py (modified) * sasmodels/models/vesicle.py (modified) * sasmodels/multiscat.py (modified) * sasmodels/product.py (modified) * sasmodels/rst2html.py (modified) * sasmodels/sasview_model.py (modified) * sasmodels/sesans.py (modified) * sasmodels/special.py (modified) * sasmodels/weights.py (modified) lint Tue, 06 Nov 2018 21:10:43 GMT grethevj [99658f6] * sasmodels/models/barbell.c (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/pearl_necklace.c (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/pringle.c (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/product.py (modified) updated ER functions including cylinder excluded volume, to match 4.x Mon, 10 Sep 2018 20:16:46 GMT Paul Kienzle [ee60aa7] * explore/precision.py (modified) * sasmodels/core.py (modified) * sasmodels/kernel.py (modified) * sasmodels/models/barbell.c (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.c (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.c (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fuzzy_sphere.c (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/mono_gauss_coil.c (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.c (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.c (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/pringle.c (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.c (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/sphere.c (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/vesicle.c (modified) * sasmodels/models/vesicle.py (modified) clean up effective radius functions; improve mono_gauss_coil accuracy; ... Fri, 07 Sep 2018 09:29:38 GMT grethevj [d277229] * sasmodels/models/barbell.c (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.c (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.c (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fuzzy_sphere.c (added) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/mono_gauss_coil.c (added) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.c (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.c (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/pringle.c (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.c (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/sphere.c (added) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/vesicle.c (modified) * sasmodels/models/vesicle.py (modified) Models updated to include choices for effective interaction radii Tue, 14 Aug 2018 16:09:34 GMT Paul Kienzle [71b751d] * sasmodels/core.py (modified) * sasmodels/models/barbell.c (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/binary_hard_sphere.c (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.c (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.c (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.c (modified) * sasmodels/models/flexible_cylinder.c (modified) * sasmodels/models/flexible_cylinder_elliptical.c (modified) * sasmodels/models/fractal.c (modified) * sasmodels/models/fractal_core_shell.c (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar_hg_stack_caille.c (modified) * sasmodels/models/lamellar_stack_caille.c (modified) * sasmodels/models/lamellar_stack_paracrystal.c (modified) * sasmodels/models/lib/core_shell.c (modified) * sasmodels/models/linear_pearls.c (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/multilayer_vesicle.c (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.c (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/raspberry.c (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.c (modified) * sasmodels/models/sc_paracrystal.c (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/spinodal.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/vesicle.c (modified) * sasmodels/models/vesicle.py (modified) update remaining form factors to use Fq interface Thu, 30 Nov 2017 12:42:55 GMT Paul Kienzle [37f08d2] * sasmodels/models/triaxial_ellipsoid.py (modified) lint Wed, 29 Nov 2017 18:13:23 GMT Paul Kienzle [2d81cfe] * extra/pylint.rc (modified) * sasmodels/bumps_model.py (modified) * sasmodels/compare.py (modified) * sasmodels/compare_many.py (modified) * sasmodels/convert.py (modified) * sasmodels/core.py (modified) * sasmodels/data.py (modified) * sasmodels/details.py (modified) * sasmodels/direct_model.py (modified) * sasmodels/generate.py (modified) * sasmodels/kernel.py (modified) * sasmodels/kernelcl.py (modified) * sasmodels/kerneldll.py (modified) * sasmodels/kernelpy.py (modified) * sasmodels/list_pars.py (modified) * sasmodels/mixture.py (modified) * sasmodels/model_test.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/__init__.py (modified) * sasmodels/models/_spherepy.py (modified) * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/peak_lorentz.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/porod.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/spinodal.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/two_power_law.py (modified) * sasmodels/models/unified_power_Rg.py (modified) * sasmodels/models/vesicle.py (modified) * sasmodels/product.py (modified) * sasmodels/resolution.py (modified) * sasmodels/resolution2d.py (modified) * sasmodels/rst2html.py (modified) * sasmodels/sasview_model.py (modified) * sasmodels/weights.py (modified) lint Tue, 01 Aug 2017 20:38:47 GMT Paul Kienzle [31df0c9] * sasmodels/compare.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) tuned random model generation for more models Tue, 11 Apr 2017 10:11:36 GMT richardh [34a9e4e] * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) more docs fixes Mon, 10 Apr 2017 17:09:14 GMT richardh [e645373] * sasmodels/models/triaxial_ellipsoid.py (modified) add 2d unit test to triaxial_ellipsoid, check opencl later Mon, 10 Apr 2017 15:56:55 GMT richardh [9802ab3] * sasmodels/models/barbell.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/img/cylinder_angle_definition.jpg (deleted) * sasmodels/models/img/cylinder_angle_definition.png (added) * sasmodels/models/img/elliptical_cylinder_angle_definition.png (modified) * sasmodels/models/img/parallelepiped_angle_definition.png (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) changes to docs, anticipating new orientation angle integrals Sat, 08 Apr 2017 12:41:56 GMT richardh [3401a7a] * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) two more docs fixes Sat, 08 Apr 2017 11:51:51 GMT richardh [48438f9] * explore/jitter.py (moved) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/hollow_cylinder.py (modified) more docs change for new rotation angles Sat, 08 Apr 2017 11:48:49 GMT richardh [9b79f29] * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) more docs change for new rotation angles Sat, 08 Apr 2017 09:33:25 GMT Paul Kienzle [0881f4e] * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) clean up merge droppings Sat, 08 Apr 2017 09:29:21 GMT Paul Kienzle [18d732c] * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/img/bcc_angle_definition.png (deleted) * sasmodels/models/img/sc_crystal_angle_definition.jpg (deleted) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/parallelepiped.py (modified) Merge branch 'ticket-890' of github.com:sasview/sasmodels into ... Sat, 08 Apr 2017 09:21:45 GMT richardh [737679d] * .gitattributes (modified) * .travis.yml (modified) * doc/ref/sesans/sans_to_sesans.rst (modified) * doc/ref/sesans/sesans_fitting.rst (modified) * example/sesans_sphere_2micron.py (modified) * sasmodels/bumps_model.py (modified) * sasmodels/list_pars.py (modified) * sasmodels/model_test.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/img/bcc_angle_definition.png (deleted) * sasmodels/models/img/sc_crystal_angle_definition.jpg (deleted) docs edits for bcc_ fc_ sc_paracrystal Sat, 08 Apr 2017 09:16:13 GMT richardh [1f65db5] * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/img/bcc_angle_definition.png (deleted) * sasmodels/models/img/sc_crystal_angle_definition.jpg (deleted) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) docs edits for bcc_ fc_ sc_paracrystal Sat, 08 Apr 2017 09:15:43 GMT Paul Kienzle [afd4692] * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) fix line lengths Sat, 08 Apr 2017 08:32:39 GMT Paul Kienzle [3fd0499] * .gitattributes (modified) * .travis.yml (modified) * doc/ref/sesans/sans_to_sesans.rst (modified) * doc/ref/sesans/sesans_fitting.rst (modified) * example/sesans_sphere_2micron.py (modified) * sasmodels/bumps_model.py (modified) * sasmodels/list_pars.py (modified) * sasmodels/model_test.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * explore/angular_pd.py (modified) * explore/shimmy.py (added) * sasmodels/compare.py (modified) * sasmodels/kernel_header.c (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.c (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.c (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/img/cylinder_angle_projection.jpg (deleted) * sasmodels/models/img/cylinder_angle_projection.png (added) * sasmodels/models/img/elliptical_cylinder_angle_definition.jpg (deleted) * sasmodels/models/img/elliptical_cylinder_angle_definition.png (added) * sasmodels/models/img/elliptical_cylinder_angle_projection.png (added) * sasmodels/models/img/parallelepiped_angle_definition.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_definition.png (added) * sasmodels/models/img/parallelepiped_angle_projection.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_projection.png (added) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.jpg (deleted) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.png (added) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/sc_paracrystal.c (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) Merge branch 'master' into ticket-890 Fri, 07 Apr 2017 15:29:52 GMT ajj [3330bb4] * doc/ref/sesans/sans_to_sesans.rst (modified) * doc/ref/sesans/sesans_fitting.rst (modified) * example/sesans_sphere_2micron.py (modified) * sasmodels/bumps_model.py (modified) * sasmodels/list_pars.py (modified) * sasmodels/model_test.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) Normalise line endings Fri, 07 Apr 2017 14:59:30 GMT Paul Kienzle [16a8c63] * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/img/cylinder_angle_projection.jpg (deleted) * sasmodels/models/img/cylinder_angle_projection.png (added) * sasmodels/models/img/elliptical_cylinder_angle_definition.jpg (deleted) * sasmodels/models/img/elliptical_cylinder_angle_definition.png (added) * sasmodels/models/img/elliptical_cylinder_angle_projection.png (added) * sasmodels/models/img/parallelepiped_angle_definition.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_definition.png (added) * sasmodels/models/img/parallelepiped_angle_projection.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_projection.png (added) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.jpg (deleted) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.png (added) * sasmodels/models/parallelepiped.py (modified) Merge branch 'ticket-852-unit-tests' into ticket-890 Thu, 06 Apr 2017 17:20:47 GMT richardh [15a90c1] * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/img/cylinder_angle_projection.jpg (deleted) * sasmodels/models/img/cylinder_angle_projection.png (added) * sasmodels/models/img/elliptical_cylinder_angle_definition.jpg (deleted) * sasmodels/models/img/elliptical_cylinder_angle_definition.png (added) * sasmodels/models/img/elliptical_cylinder_angle_projection.png (added) * sasmodels/models/img/parallelepiped_angle_definition.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_definition.png (added) * sasmodels/models/img/parallelepiped_angle_projection.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_projection.png (added) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.jpg (deleted) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.png (added) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) more changes for new axes, and a bug in cylinder.py docs Thu, 06 Apr 2017 10:11:41 GMT Paul Kienzle [4aaf89a] * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) triaxial ellipsoid/parallelepiped: choose the pair of lengths that are ... Thu, 06 Apr 2017 10:01:42 GMT richardh [0b56f38] * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) unit tests added, needs opencl testing Wed, 05 Apr 2017 13:36:50 GMT richardh [4b0a294] * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) docu improvements re #890 Thu, 23 Mar 2017 05:35:09 GMT Paul Kienzle [28d3067] * sasmodels/models/triaxial_ellipsoid.py (modified) triaxial ellipsoid: remove note regarding relative size of Ra, Rb and Rc ... Thu, 23 Mar 2017 02:43:16 GMT Paul Kienzle [67595af] * sasmodels/models/triaxial_ellipsoid.py (modified) triaxial ellipsoid: update equations in the docs. Wed, 11 Jan 2017 13:27:54 GMT wojciech [925ad6e] * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/binary_hard_sphere.c (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/core_multi_shell.c (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/fractal.c (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/lib/core_shell.c (modified) * sasmodels/models/lib/gfn.c (modified) * sasmodels/models/lib/sphere_form.c (modified) * sasmodels/models/linear_pearls.c (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/mass_fractal.c (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/multilayer_vesicle.c (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.c (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/pearl_necklace.c (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/polymer_micelle.c (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/raspberry.c (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/surface_fractal.c (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/vesicle.c (modified) * sasmodels/models/vesicle.py (modified) sph_j1c translated to sas_3j1x_x Fri, 07 Oct 2016 19:51:36 GMT richardh [416f5c7] * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/img/core_shell_ellipsoid_geometry.png (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) fixes for numref warnings in docu, new equations core_shell_bicelle ... Sat, 01 Oct 2016 04:42:06 GMT butler [a807206] * sasmodels/models/correlation_length.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fractal_core_shell.c (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.c (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.c (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/mass_fractal.c (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.c (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/pearl_necklace.c (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_micelle.c (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/stacked_disks.c (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/surface_fractal.c (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) updating more parameter names addressing #649 Thu, 21 Jul 2016 06:09:17 GMT Paul Kienzle [42356c8] * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid_xt.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/unified_power_Rg.py (modified) * sasmodels/models/vesicle.py (modified) label all sld parameters Mon, 04 Apr 2016 22:45:36 GMT Paul Kienzle [ec45c4f] * sasmodels/convert.json (modified) * sasmodels/models/_spherepy.py (modified) * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_ellipsoid_xt.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/correlation_length.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/peak_lorentz.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/porod.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/two_power_law.py (modified) * sasmodels/models/vesicle.py (modified) remove oldname/oldpars from new models Mon, 21 Mar 2016 09:53:21 GMT richardh [49da079] * sasmodels/models/_spherepy.py (moved) * sasmodels/models/sphere.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) sld name changes, hide experimental spherepy.py from docs by rename to ... Sun, 20 Mar 2016 10:43:57 GMT smk78 [6ef4293] * sasmodels/models/cylinder.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) Changed wording of :numref: link to resolve a Sphinx formatting error ... Sun, 20 Mar 2016 09:46:30 GMT smk78 [5933c7f] * sasmodels/models/cylinder.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) Fixed undefined figure labels Sun, 20 Mar 2016 08:48:58 GMT smk78 [2f63032] * CylinderModel.py (deleted) * doc/Makefile (modified) * sasmodels/models/bessel.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/img/ellipsoid_comparison_2d.jpg (added) * sasmodels/models/img/squarewell.png (added) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/porod.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/resolution.py (modified) Changes to improve doc build Sat, 19 Mar 2016 20:34:39 GMT wojciech [43b7eea] * sasmodels/models/bcc.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc.py (modified) * sasmodels/models/flexible_cylinder.c (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_ex.c (modified) * sasmodels/models/flexible_cylinder_ex.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_infinitely_thin_walls.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/stacked_disks.c (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) Initial clean-up of Bessel functions Thu, 17 Mar 2016 13:07:04 GMT gonzalezm [aa2edb2] * doc/genmodel.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/correlation_length.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_ex.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_infinitely_thin_walls.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellarCaille.py (modified) * sasmodels/models/lamellarCailleHG.py (modified) * sasmodels/models/lamellarFFHG.py (modified) * sasmodels/models/lamellarPC.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/peak_lorentz.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherepy.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/two_power_law.py (modified) * sasmodels/models/vesicle.py (modified) Removing hardcoded figures to be replaced by autogenerated ones Wed, 16 Mar 2016 19:07:15 GMT Paul Kienzle [2f0c07d] * sasmodels/generate.py (modified) * sasmodels/models/_onion.py (modified) * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_ellipsoid_xt.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/img/bcc_angle_definition.png (moved) * sasmodels/models/img/bcc_geometry.jpg (moved) * sasmodels/models/img/core_shell_ellipsoid_angle_projection.jpg (moved) * sasmodels/models/img/core_shell_ellipsoid_geometry.gif (moved) * sasmodels/models/img/core_shell_parallelepiped_geometry.jpg (moved) * sasmodels/models/img/cylinder_angle_definition.jpg (moved) * sasmodels/models/img/cylinder_angle_projection.jpg (moved) * sasmodels/models/img/ellipsoid_angle_projection.jpg (moved) * sasmodels/models/img/elliptical_cylinder_angle_definition.jpg (moved) * sasmodels/models/img/fcc_geometry.jpg (moved) * sasmodels/models/img/linear_pearls_geometry.jpg (moved) * sasmodels/models/img/multi_shell_geometry.jpg (moved) * sasmodels/models/img/onion_geometry.gif (moved) * sasmodels/models/img/parallelepiped_angle_definition.jpg (moved) * sasmodels/models/img/parallelepiped_angle_projection.jpg (added) * sasmodels/models/img/parallelepiped_geometry.jpg (moved) * sasmodels/models/img/pearl_necklace_geometry.jpg (moved) * sasmodels/models/img/sc_crystal_2d.jpg (moved) * sasmodels/models/img/sc_crystal_angle_definition.jpg (moved) * sasmodels/models/img/sc_crystal_geometry.jpg (moved) * sasmodels/models/img/stacked_disks_angle_definition.jpg (moved) * sasmodels/models/img/stacked_disks_angle_projection.jpg (moved) * sasmodels/models/img/stacked_disks_fig3.jpg (deleted) * sasmodels/models/img/stacked_disks_geometry.gif (moved) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.jpg (moved) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/multi_shell.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/sc_crystal.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) make figure names regular (geometry, angle_definition, angle_projection) Thu, 18 Feb 2016 18:03:52 GMT mathieu [469e763] * sasmodels/models/triaxial_ellipsoid.py (modified) Fix pylint Thu, 18 Feb 2016 18:02:24 GMT mathieu [ef822dc] * sasmodels/models/triaxial_ellipsoid.py (modified) Fix pylint Thu, 21 Jan 2016 07:47:17 GMT piotr [9c461c7] * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/lib/J1c.c (deleted) * sasmodels/models/lib/sph_j1c.c (added) * sasmodels/models/mass_fractal.c (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/surface_fractal.c (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) 1. Code review from PK: renamed J1c to sph_j1c 2. Fixed mass_fractal Wed, 20 Jan 2016 09:50:50 GMT piotr [513efc5] * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/lib/J1c.c (added) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/surface_fractal.c (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) Code review issues from PK addressed. Added Taylor expansion utility ... Tue, 01 Dec 2015 02:18:41 GMT Paul Kienzle [eb69cce] * sasmodels/generate.py (modified) * sasmodels/models/HayterMSAsq.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/fcc.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/img/crystal_orientation.gif (deleted) * sasmodels/models/img/crystal_orientation.png (added) * sasmodels/models/img/parallelepiped_compare.gif (deleted) * sasmodels/models/img/parallelepiped_compare.png (added) * sasmodels/models/img/stickyhardsphere_1d.jpg (moved) * sasmodels/models/img/stickyhardsphere_228.PNG (deleted) * sasmodels/models/img/stickyhardsphere_229.PNG (deleted) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellarCaille.py (modified) * sasmodels/models/lamellarCailleHG.py (modified) * sasmodels/models/lamellarFFHG.py (modified) * sasmodels/models/lamellarPC.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherepy.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) make model docs more consistent; build pdf docs Mon, 09 Mar 2015 19:14:03 GMT Doucet, Mathieu [3e428ec] * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/fcc.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellarCaille.py (modified) * sasmodels/models/lamellarCailleHG.py (modified) * sasmodels/models/lamellarFFHG.py (modified) * sasmodels/models/lamellarPC.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherepy.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) Cleaning up Thu, 05 Mar 2015 05:55:38 GMT Paul Kienzle [3c56da87] * extra/pylint.rc (modified) * extra/pylint_numpy.py (added) * extra/pylint_pyopencl.py (added) * extra/run-pylint.py (modified) * sasmodels/alignment.py (modified) * sasmodels/bumps_model.py (modified) * sasmodels/convert.py (modified) * sasmodels/core.py (modified) * sasmodels/generate.py (modified) * sasmodels/kernelcl.py (modified) * sasmodels/kerneldll.py (modified) * sasmodels/kernelpy.py (modified) * sasmodels/model_test.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/fcc.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellarCaille.py (modified) * sasmodels/models/lamellarCailleHG.py (modified) * sasmodels/models/lamellarFFHG.py (modified) * sasmodels/models/lamellarPC.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherepy.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/sasview_model.py (modified) * sasmodels/sesans.py (modified) * sasmodels/weights.py (modified) lint cleanup Fri, 27 Feb 2015 18:16:23 GMT Paul Kienzle [a5d0d00] * sasmodels/generate.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/fcc.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/img/barbell_geometry.jpg (added) * sasmodels/models/img/bcc_1d.jpg (added) * sasmodels/models/img/bcc_2d.jpg (added) * sasmodels/models/img/bcc_lattice.jpg (added) * sasmodels/models/img/bcc_orientation.gif (added) * sasmodels/models/img/lamellarCaille_134.jpg (deleted) * sasmodels/models/img/lamellarCaille_139.PNG (deleted) * sasmodels/models/img/lamellarCaille_140.PNG (deleted) * sasmodels/models/img/lamellarCaille_1d.jpg (moved) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellarCaille.py (modified) * sasmodels/models/lamellarCailleHG.py (modified) * sasmodels/models/lamellarFFHG.py (modified) * sasmodels/models/lamellarPC.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherepy.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) doc fixups: add doc category to model def, convert equations to latex ... Tue, 17 Feb 2015 00:41:55 GMT pkienzle [a503bfd] * compare.py (modified) * sasmodels/convert.py (modified) * sasmodels/generate.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherepy.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) move sasview->sasmodels conversion info to model definition Tue, 17 Feb 2015 00:06:30 GMT pkienzle [d547f16] * compare.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherepy.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) move demo parameters for compare.py into individual models Wed, 03 Sep 2014 07:16:10 GMT Paul Kienzle [19dcb933] * README.rst (moved) * doc/Makefile (added) * doc/README.txt (added) * doc/_extensions/dollarmath.py (added) * doc/_extensions/numfig.py (added) * doc/conf.py (added) * doc/genapi.py (added) * doc/genmodel.py (added) * doc/guide/index.rst (added) * doc/index.rst (added) * doc/make.bat (added) * doc/models/cylinders.rst (added) * doc/models/ellipsoids.rst (added) * doc/models/index.rst (added) * doc/models/intro.rst (added) * doc/models/lamellae.rst (added) * doc/models/models.rst (added) * doc/models/refs.rst (added) * doc/models/shapes.rst (added) * doc/models/spheres.rst (added) * doc/rst_prolog (added) * sasmodels/__init__.py (modified) * sasmodels/gen.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/cylinder_clone.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) build docs for models Tue, 02 Sep 2014 05:24:38 GMT Paul Kienzle [5d4777d] * compare-new.py (modified) * sasmodels/bumps_model.py (modified) * sasmodels/convert.py (added) * sasmodels/dll.py (modified) * sasmodels/gen.py (modified) * sasmodels/gpu.py (modified) * sasmodels/models/README.rst (modified) * sasmodels/models/capped_cylinder.c (added) * sasmodels/models/capped_cylinder.py (added) * sasmodels/models/core_shell_cylinder.c (added) * sasmodels/models/core_shell_cylinder.py (added) * sasmodels/models/cylinder.c (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/cylinder_clone.c (modified) * sasmodels/models/cylinder_clone.py (modified) * sasmodels/models/cylinder_onefile.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (added) * sasmodels/models/lamellar.py (added) * sasmodels/models/lib/cylkernel.c (deleted) * sasmodels/models/sphere.py (added) * sasmodels/models/triaxial_ellipsoid.c (added) * sasmodels/models/triaxial_ellipsoid.py (added) * sasmodels/sasview_model.py (modified) * sasmodels/weights.py (modified) reorganize, check and update models