# # ChangeLog for doc/guide in sasmodels # # Generated by Trac 1.0.1 # Dec 26, 2024 11:32:47 PM Thu, 25 Oct 2018 22:16:04 GMT Paul Kienzle [81751c2] * doc/guide/plugin.rst (modified) * sasmodels/model_test.py (modified) * sasmodels/models/sphere.py (modified) allow structure factor tests in model file. Refs #822. Thu, 25 Oct 2018 21:35:06 GMT Paul Kienzle [304c775] * doc/guide/plugin.rst (modified) * sasmodels/direct_model.py (modified) * sasmodels/model_test.py (modified) * sasmodels/models/_spherepy.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/vesicle.py (modified) provide method for testing Fq results. Refs #1202. Thu, 25 Oct 2018 19:43:01 GMT Paul Kienzle [07646b6] * doc/guide/gpu_setup.rst (modified) * doc/guide/magnetism/magnetism.rst (modified) * sasmodels/compare.py (modified) * sasmodels/core.py (modified) * sasmodels/kernel_header.c (modified) * sasmodels/kernel_iq.c (modified) * sasmodels/kernelcl.py (modified) * sasmodels/kernelcuda.py (added) * sasmodels/model_test.py (modified) * sasmodels/models/lib/gauss76.c (modified) * sasmodels/models/lib/polevl.c (modified) * sasmodels/models/lib/sas_J1.c (modified) * sasmodels/models/spinodal.py (modified) * setup.py (modified) * doc/guide/plugin.rst (modified) * explore/beta/HSS_SQ.m (added) * explore/beta/data_files/richard_test.txt (added) * explore/beta/data_files/richard_test2.txt (added) * explore/beta/data_files/richard_test3.txt (added) * explore/beta/data_files/richard_test4.txt (added) * explore/beta/data_files/richard_test5.txt (added) * explore/beta/data_files/richard_test6.txt (added) * explore/beta/data_files/sasfit_comparison.xlsx (added) * explore/beta/data_files/sasfit_ellipsoid_IQD.txt (added) * explore/beta/data_files/sasfit_ellipsoid_IQD2.txt (added) * explore/beta/data_files/sasfit_ellipsoid_IQD3.txt (added) * explore/beta/data_files/sasfit_ellipsoid_IQD4.txt (added) * explore/beta/data_files/sasfit_ellipsoid_IQD5.txt (added) * explore/beta/data_files/sasfit_ellipsoid_IQD6.txt (added) * explore/beta/data_files/sasfit_ellipsoid_IQM.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq2.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq3.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq4.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq5.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq6.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq7.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq8.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sq9.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff2.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff3.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff4.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff5.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff6.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff7.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff8.txt (added) * explore/beta/data_files/sasfit_polydisperse_ellipsoid_sqeff9.txt (added) * explore/beta/data_files/sasfit_polydisperse_sphere_sq.txt (added) * explore/beta/data_files/sasfit_polydisperse_sphere_sqeff.txt (added) * explore/beta/data_files/sasfit_sphere_IQBD.txt (added) * explore/beta/data_files/sasfit_sphere_IQD.txt (added) * explore/beta/data_files/sasfit_sphere_IQSD.txt (added) * explore/beta/data_files/testPolydisperseGaussianSphere.dat (added) * explore/beta/data_files/testPolydisperseGaussianSphere2.dat (added) * explore/beta/data_files/yun_ellipsoid.dat (added) * explore/beta/sasfit_compare.py (added) * explore/beta/sasfit_compare_new.py (added) * explore/beta/sphereFormFactor.m (added) * explore/beta/testPolyDiseperseSphricalBeta.m (added) * explore/precision.py (modified) * sasmodels/data.py (modified) * sasmodels/generate.py (modified) * sasmodels/kernel.py (modified) * sasmodels/kerneldll.py (modified) * sasmodels/kernelpy.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/barbell.c (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/binary_hard_sphere.c (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.c (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.c (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.c (modified) * sasmodels/models/flexible_cylinder.c (modified) * sasmodels/models/flexible_cylinder_elliptical.c (modified) * sasmodels/models/fractal.c (modified) * sasmodels/models/fractal_core_shell.c (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.c (added) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/lamellar_hg_stack_caille.c (modified) * sasmodels/models/lamellar_stack_caille.c (modified) * sasmodels/models/lamellar_stack_paracrystal.c (modified) * sasmodels/models/lib/core_shell.c (modified) * sasmodels/models/lib/sphere_form.c (modified) * sasmodels/models/linear_pearls.c (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.c (added) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.c (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.c (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/pringle.c (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.c (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.c (modified) * sasmodels/models/sc_paracrystal.c (modified) * sasmodels/models/sphere.c (added) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/vesicle.c (modified) * sasmodels/models/vesicle.py (modified) * sasmodels/product.py (modified) * sasmodels/sasview_model.py (modified) Merge branch 'cuda-test' into beta_approx Thu, 25 Oct 2018 18:20:45 GMT Paul Kienzle [d5ce7fa] * doc/guide/magnetism/magnetism.rst (modified) * sasmodels/kernelcl.py (modified) * sasmodels/models/spinodal.py (modified) * setup.py (modified) * doc/guide/gpu_setup.rst (modified) * sasmodels/compare.py (modified) * sasmodels/core.py (modified) * sasmodels/kernel_header.c (modified) * sasmodels/kernel_iq.c (modified) * sasmodels/kernelcuda.py (added) * sasmodels/model_test.py (modified) * sasmodels/models/lib/gauss76.c (modified) * sasmodels/models/lib/polevl.c (modified) * sasmodels/models/lib/sas_J1.c (modified) Merge branch 'ticket-1015-gpu-mem-error' into cuda-test Thu, 25 Oct 2018 15:52:19 GMT smk78 [df87acf] * doc/guide/magnetism/magnetism.rst (modified) Replaced : in parameter names with _ in magnetism.rst Mon, 22 Oct 2018 16:54:14 GMT Paul Kienzle [31fc4ad] * doc/guide/plugin.rst (modified) and notes about shell_volume and Fq to the user guide Mon, 15 Oct 2018 17:27:14 GMT pkienzle [8b31efa] * doc/guide/gpu_setup.rst (modified) * sasmodels/kernelcl.py (modified) * sasmodels/kernelcuda.py (modified) document cuda device selection; fix cuda speed issue Tue, 18 Sep 2018 09:40:20 GMT smk78 [2015f02] * doc/guide/plugin.rst (modified) Added definition of def random() to plugin.rst Mon, 20 Aug 2018 20:15:02 GMT Paul Kienzle [bd7630d] * doc/guide/scripting.rst (modified) * sasmodels/compare.py (modified) * sasmodels/data.py (modified) update scripting docs. Refs #1141 Fri, 10 Aug 2018 09:07:45 GMT smk78 [d089a00] * doc/guide/pd/polydispersity.rst (modified) Minor formatting changes in polydispersity.rst Fri, 10 Aug 2018 09:01:42 GMT smk78 [86bb5df] * doc/guide/pd/polydispersity.rst (modified) Added warning about the default distribution & reformatted a latex eqn Thu, 09 Aug 2018 14:17:24 GMT smk78 [97d172c] * doc/guide/pd/polydispersity.rst (modified) Overhaul of polydispersity.rst Intro and DLS sections Fri, 20 Jul 2018 13:56:08 GMT smk78 [63602b1] * doc/guide/gpu_setup.rst (modified) Corrected multiple instances of SASCOMPILER to SAS_COMPILER Thu, 05 Jul 2018 14:24:26 GMT smk78 [bc1dac6] * .travis.yml (modified) * doc/guide/magnetism/magnetism.rst (modified) * doc/guide/plugin.rst (modified) * sasmodels/compare.py (modified) * sasmodels/data.py (modified) * sasmodels/details.py (modified) * sasmodels/jitter.py (modified) * sasmodels/kernel_iq.c (modified) * sasmodels/kerneldll.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/resolution.py (modified) * sasmodels/rst2html.py (modified) * sasmodels/sasview_model.py (modified) * setup_py2exe.py (deleted) * doc/guide/pd/polydispersity.rst (modified) Merge branch 'master' of https://github.com/SasView/sasmodels.git Thu, 07 Jun 2018 09:20:53 GMT GitHub [f796469] * doc/guide/plugin.rst (modified) Fixing broken link to sas_Si.c as per bug noted by J Wuttke From ... Sat, 02 Jun 2018 12:49:34 GMT awashington [befe905] * doc/guide/magnetism/magnetism.rst (modified) Update magnetism docs Thu, 05 Apr 2018 08:06:06 GMT smk78 [d712a0f] * doc/guide/pd/polydispersity.rst (modified) Further tweaks to polydispersity.rst Wed, 04 Apr 2018 11:03:51 GMT smk78 [29afc50] * doc/guide/pd/polydispersity.rst (modified) More tweaks to polydispersity.rst Mon, 26 Mar 2018 15:05:02 GMT Paul Kienzle [f4ae8c4] * doc/guide/pd/polydispersity.rst (modified) doc: remove extra indentation on dispersion distribution descriptions Mon, 26 Mar 2018 14:43:35 GMT Paul Kienzle [ed5b109] * doc/guide/pd/polydispersity.rst (modified) docs: reformat dispersity docs to 80 columns Tue, 20 Mar 2018 15:19:43 GMT smk78 [5026e05] * doc/guide/pd/polydispersity.rst (modified) Overhaul of polydispersity help for content, readability and accuracy. Mon, 05 Feb 2018 02:40:01 GMT GitHub [e526a9d] * doc/guide/pd/pd_boltzmann.jpg (added) * doc/guide/pd/pd_uniform.jpg (added) * doc/guide/pd/polydispersity.rst (modified) * sasmodels/weights.py (modified) * appveyor.yml (modified) * doc/developer/overview.rst (modified) * doc/genapi.py (modified) * doc/guide/orientation/orientation.rst (modified) * explore/multiscat.py (added) * explore/realspace.py (modified) * sasmodels/core.py (modified) * sasmodels/guyou.py (moved) * sasmodels/jitter.py (moved) * sasmodels/mixture.py (modified) * sasmodels/modelinfo.py (modified) Merge pull request #59 from SasView/boltzmann add BoltzmannDistribution ... Wed, 24 Jan 2018 21:41:26 GMT Paul Kienzle [0d5a655] * doc/developer/overview.rst (modified) * doc/genapi.py (modified) * doc/guide/orientation/orientation.rst (modified) * sasmodels/guyou.py (moved) * sasmodels/jitter.py (moved) make jitter explorer available from sasview app Wed, 17 Jan 2018 21:14:03 GMT Paul Kienzle [72e41a0] * .gitignore (modified) * .travis.yml (modified) * appveyor.yml (modified) * deploy.sh (modified) * doc/developer/overview.rst (modified) * doc/guide/orientation/orientation.rst (modified) * doc/guide/plugin.rst (modified) * explore/asymint.py (modified) * explore/jitter.py (modified) * explore/precision.py (modified) * explore/realspace.py (added) * sasmodels/compare.py (modified) * sasmodels/details.py (modified) * sasmodels/generate.py (modified) * sasmodels/gengauss.py (added) * sasmodels/kernel_header.c (modified) * sasmodels/kernel_iq.c (modified) * sasmodels/kernelpy.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/_spherepy.py (modified) * sasmodels/models/barbell.c (modified) * sasmodels/models/bcc_paracrystal.c (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.c (modified) * sasmodels/models/flexible_cylinder_elliptical.c (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified) * sasmodels/models/lib/gauss150.c (modified) * sasmodels/models/lib/gauss20.c (modified) * sasmodels/models/lib/gauss76.c (modified) * sasmodels/models/line.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/pringle.c (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/sc_paracrystal.c (modified) * sasmodels/models/stacked_disks.c (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/special.py (modified) * doc/guide/pd/pd_boltzmann.jpg (added) * doc/guide/pd/pd_uniform.jpg (added) * doc/guide/pd/polydispersity.rst (modified) * sasmodels/weights.py (modified) Merge branch 'master' into boltzmann Tue, 16 Jan 2018 09:31:23 GMT dirk [92d330fd] * doc/guide/pd/polydispersity.rst (modified) undo typo in polydispersity docs Fri, 12 Jan 2018 15:57:34 GMT dirk [3d58247] * doc/guide/pd/pd_uniform.jpg (modified) * doc/guide/pd/polydispersity.rst (modified) * sasmodels/weights.py (modified) uniform distribution ignores nsigma Tue, 09 Jan 2018 19:14:12 GMT Paul Kienzle [22279a4] * doc/guide/pd/polydispersity.rst (modified) doc tweak: don't need to give the number of distributions in the list Thu, 21 Dec 2017 13:01:39 GMT Paul Kienzle [5fb0634] * doc/guide/orientation/orientation.rst (modified) update orientation docs Wed, 20 Dec 2017 21:16:27 GMT Paul Kienzle [8cfb486] * doc/guide/orientation/orientation.rst (modified) * explore/jitter.py (modified) update orientation docs Wed, 20 Dec 2017 19:41:35 GMT Paul Kienzle [06ee63c] * doc/guide/orientation/orientation.rst (modified) update orientation docs Wed, 20 Dec 2017 19:33:39 GMT Paul Kienzle [7e6bc45e] * doc/guide/orientation/orientation.rst (modified) * doc/guide/plugin.rst (modified) update orientation docs Fri, 15 Dec 2017 11:39:24 GMT GitHub [c654160] * doc/guide/plugin.rst (modified) Corrected typo in plugin.rst Thu, 14 Dec 2017 23:16:05 GMT Paul Kienzle [b85227d] * doc/guide/plugin.rst (modified) improve latex for 1-D integration equations Thu, 14 Dec 2017 21:07:26 GMT Paul Kienzle [ef85a09] * doc/guide/plugin.rst (modified) document the new c_code='...' model definition option Thu, 14 Dec 2017 20:08:45 GMT Paul Kienzle [108e70e] * doc/guide/plugin.rst (modified) * sasmodels/details.py (modified) * sasmodels/generate.py (modified) * sasmodels/kernel_header.c (modified) * sasmodels/kernel_iq.c (modified) * sasmodels/kernelpy.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/_spherepy.py (modified) * sasmodels/models/barbell.c (modified) * sasmodels/models/bcc_paracrystal.c (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (modified) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/fcc_paracrystal.c (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_rectangular_prism.c (modified) * sasmodels/models/line.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/rectangular_prism.c (modified) * sasmodels/models/sc_paracrystal.c (modified) * sasmodels/models/stacked_disks.c (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) use Iqac/Iqabc for the new orientation interface but Iqxy for the old Mon, 04 Dec 2017 13:29:04 GMT Paul Kienzle [d0dc9a3] * doc/guide/plugin.rst (modified) * sasmodels/special.py (modified) document GAUSS_N, GAUSS_Z, GAUSS_W and simplify use from ... Thu, 30 Nov 2017 05:30:08 GMT Paul Kienzle [a66b004] * LICENSE.txt (modified) * doc/_extensions/dollarmath.py (modified) * doc/developer/calculator.rst (modified) * doc/developer/overview.rst (modified) * doc/genapi.py (modified) * doc/guide/index.rst (modified) * doc/guide/magnetism/magnetism.rst (modified) * doc/guide/orientation/orient_img/elliptical_cylinder_angle_definition.png (added) * doc/guide/orientation/orient_img/elliptical_cylinder_angle_projection.png (added) * doc/guide/orientation/orientation.rst (added) * doc/guide/pd/polydispersity.rst (modified) * doc/guide/resolution.rst (modified) * example/sesans_parameters_sphere.py (modified) * example/sesans_sphere_2micron.py (modified) * example/sesansfit.py (modified) * example/spheres2micron.ses (modified) * explore/angles.py (added) * explore/asymint.py (added) * explore/check1d.py (added) * explore/guyou.py (added) * explore/jitter.py (modified) * explore/precision.py (modified) * explore/sc.c (added) * explore/sc.py (added) * explore/symint.py (added) * explore/transform_angles.py (added) * extra/pylint.rc (modified) * extra/pylint_sas.py (added) * sasmodels/__init__.py (modified) * sasmodels/bumps_model.py (modified) * sasmodels/compare.py (modified) * sasmodels/compare_many.py (modified) * sasmodels/conversion_table.py (modified) * sasmodels/convert.py (modified) * sasmodels/core.py (modified) * sasmodels/data.py (modified) * sasmodels/details.py (modified) * sasmodels/direct_model.py (modified) * sasmodels/generate.py (modified) * sasmodels/kernel.py (modified) * sasmodels/kernel_header.c (modified) * sasmodels/kernel_iq.c (modified) * sasmodels/kernel_iq.cl (deleted) * sasmodels/kernelcl.py (modified) * sasmodels/kerneldll.py (modified) * sasmodels/kernelpy.py (modified) * sasmodels/list_pars.py (modified) * sasmodels/mixture.py (modified) * sasmodels/model_test.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/__init__.py (modified) * sasmodels/models/_spherepy.py (modified) * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.c (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.c (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.c (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (added) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.py (added) * sasmodels/models/core_shell_cylinder.c (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.c (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.c (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.c (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.c (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/img/core_shell_bicelle_belt_geometry.png (added) * sasmodels/models/img/core_shell_bicelle_belt_parameters.png (added) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/line.py (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/peak_lorentz.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/porod.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/rpa.py (modified) * sasmodels/models/sc_paracrystal.c (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/spinodal.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/stacked_disks.c (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/two_power_law.py (modified) * sasmodels/models/unified_power_Rg.py (modified) * sasmodels/models/vesicle.py (modified) * sasmodels/product.py (modified) * sasmodels/resolution.py (modified) * sasmodels/resolution2d.py (modified) * sasmodels/rst2html.py (modified) * sasmodels/sasview_model.py (modified) * sasmodels/sesans.py (modified) * sasmodels/special.py (added) * sasmodels/weights.py (modified) * doc/guide/pd/pd_boltzmann.jpg (added) * doc/guide/pd/pd_uniform.jpg (added) Merge branch 'master' into boltzmann Wed, 15 Nov 2017 23:12:11 GMT Paul Kienzle [4f5afc9] * doc/guide/magnetism/magnetism.rst (modified) magnetism: add docs about spin state weighting in final calc Mon, 06 Nov 2017 18:12:33 GMT richardh [82592da] * doc/guide/orientation/orientation.rst (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical_belt_rough.c (modified) * sasmodels/models/elliptical_cylinder.c (modified) swapped 2d qa with qb in three elliptical particles, edits to ... Sun, 29 Oct 2017 12:42:16 GMT dirk [a70959a] * doc/guide/pd/pd_boltzmann.jpg (modified) * doc/guide/pd/pd_uniform.jpg (modified) correct typos in pd_boltzmann and pd_uniform images Sun, 29 Oct 2017 01:33:21 GMT Paul Kienzle [0db85af] * doc/guide/resolution.rst (modified) * explore/jitter.py (modified) * sasmodels/rst2html.py (modified) * sasmodels/weights.py (modified) Now allowed '-' before and after '$', such as 1-$\sigma$ or $x$-$y$-$z$ Sun, 29 Oct 2017 01:28:22 GMT Paul Kienzle [3d40839] * doc/_extensions/dollarmath.py (modified) * doc/developer/overview.rst (modified) * doc/guide/orientation/orientation.rst (modified) update orientation docs Sun, 29 Oct 2017 01:11:13 GMT Paul Kienzle [e964ab1] * doc/developer/overview.rst (modified) * doc/guide/orientation/orientation.rst (modified) reformat orientation docs to 80 columns Sat, 28 Oct 2017 13:31:28 GMT dirk [75e4319] * doc/guide/pd/pd_uniform.jpg (added) * doc/guide/pd/polydispersity.rst (modified) * sasmodels/weights.py (modified) create uniform distribution and docs ticket addresses #764 Sat, 28 Oct 2017 10:42:15 GMT richardh [eda8b30] * doc/developer/overview.rst (modified) * doc/guide/orientation/orientation.rst (modified) * doc/guide/pd/polydispersity.rst (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/stacked_disks.py (modified) further changes to model docs for orientation calcs Sat, 28 Oct 2017 08:02:56 GMT dirk [a5a12ca] * doc/guide/pd/pd_boltzmann.jpg (added) * doc/guide/pd/polydispersity.rst (modified) * sasmodels/weights.py (modified) implementation of Boltzmann distribution refs #1018 Fri, 27 Oct 2017 16:11:24 GMT richardh [da5536f] * doc/developer/overview.rst (modified) * doc/guide/index.rst (modified) * doc/guide/orientation/orient_img/elliptical_cylinder_angle_definition.png (added) * doc/guide/orientation/orient_img/elliptical_cylinder_angle_projection.png (added) * doc/guide/orientation/orientation.rst (added) new chapters in main user and developed docs for Orientation Thu, 19 Oct 2017 18:58:57 GMT Paul Kienzle [2c108a3] * doc/developer/calculator.rst (modified) * doc/guide/magnetism/magnetism.rst (modified) * sasmodels/generate.py (modified) * sasmodels/kernel_iq.c (modified) simplify magnetism code Fri, 29 Sep 2017 13:11:13 GMT Paul Kienzle [1f058ea] * doc/guide/magnetism/magnetism.rst (modified) * doc/guide/pd/polydispersity.rst (modified) * doc/guide/resolution.rst (modified) resolve minor differences between the updated docs sasview and the ... Thu, 28 Sep 2017 21:50:19 GMT Paul Kienzle [4aa5dce] * doc/guide/scripting.rst (modified) note how to run sasmodels scripts from the sasview executable on windows Thu, 28 Sep 2017 18:38:48 GMT Paul Kienzle [59485a4] * doc/guide/gpu_setup.rst (modified) * doc/guide/magnetism/magnetism.rst (modified) doc tweaks Thu, 28 Sep 2017 11:58:47 GMT Paul Kienzle [3048ec6] * doc/guide/plugin.rst (modified) doc updates: note that model/parameter names can't start with numbers Wed, 27 Sep 2017 20:29:00 GMT Paul Kienzle [c0d7ab3] * doc/guide/gpu_setup.rst (added) * doc/guide/index.rst (modified) * doc/guide/install.rst (modified) split gpu setup from sasmodels installation Wed, 27 Sep 2017 16:44:40 GMT Paul Kienzle [9844c3a] * doc/guide/plugin.rst (modified) add note to the model writer about integer parameters Tue, 05 Sep 2017 18:39:41 GMT Paul Kienzle [30b60d2] * doc/conf.py (modified) * doc/guide/magnetism/mag_img/mag_vector.png (moved) * doc/guide/plugin.rst (modified) * doc/guide/resolution.rst (modified) * doc/guide/resolution_2d_rotation.gif (deleted) * doc/guide/resolution_2d_rotation.png (added) * doc/rst_prolog (modified) * sasmodels/generate.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/rpa.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/surface_fractal.py (modified) allow build of both latex and html Tue, 05 Sep 2017 15:40:09 GMT Paul Kienzle [64eecf7] * .gitattributes (added) * .gitignore (modified) * .travis.yml (modified) * LICENSE.txt (modified) * appveyor.yml (added) * doc/conf.py (modified) * doc/developer/calculator.rst (modified) * doc/developer/index.rst (modified) * doc/developer/overview.rst (added) * doc/genapi.py (modified) * doc/gentoc.py (modified) * doc/guide/index.rst (modified) * doc/guide/install.rst (added) * doc/guide/intro.rst (added) * doc/guide/magnetism/mag_img/M_angles_pic.png (moved) * doc/guide/magnetism/magnetism.rst (moved) * doc/guide/pd/pd_gaussian.jpg (added) * doc/guide/pd/pd_lognormal.jpg (added) * doc/guide/pd/pd_rectangular.jpg (added) * doc/guide/pd/pd_schulz.jpg (added) * doc/guide/pd/polydispersity.rst (added) * doc/guide/plugin.rst (added) * doc/guide/refs.rst (moved) * doc/guide/resolution.rst (added) * doc/guide/resolution_2d_rotation.gif (added) * doc/guide/scripting.rst (added) * doc/guide/sesans/SESANSinSASVIEW.pdf (moved) * doc/guide/sesans/sans_to_sesans.rst (added) * doc/guide/sesans/sesans_fitting.rst (moved) * doc/guide/sesans/sesans_img/HardSphereLineFitSasView.png (moved) * doc/guide/sesans/sesans_img/SphereLineFitSasView.png (moved) * doc/index.rst (modified) * doc/ref/gpu/gpu_computations.rst (deleted) * doc/ref/gpu/opencl_installation.rst (deleted) * doc/ref/index.rst (deleted) * doc/ref/intro.rst (deleted) * doc/ref/sesans/sans_to_sesans.rst (deleted) * example/093191_201.dat (added) * example/093192_202.dat (added) * example/093193_203.dat (added) * example/093194_204.dat (added) * example/093195_205.dat (added) * example/batch_fit.py (added) * example/cylinder_eval.py (added) * example/latex_smeared_out_0.txt (added) * example/latex_smeared_out_1.txt (added) * example/model.py (modified) * example/model_ellipsoid_hayter_msa.py (added) * example/oriented_usans.py (modified) * example/sesans_sphere_2micron.py (modified) * example/simul_fit.py (added) * explore/J1.py (deleted) * explore/J1c.py (deleted) * explore/angular_pd.py (modified) * explore/cyl.py (deleted) * explore/jitter.py (added) * explore/lgamma.py (deleted) * explore/log_gamma.py (deleted) * explore/precision.py (added) * explore/sinc.py (deleted) * explore/sph_j1c.py (deleted) * sasmodels/__init__.py (modified) * sasmodels/alignment.py (modified) * sasmodels/bumps_model.py (modified) * sasmodels/compare.py (modified) * sasmodels/core.py (modified) * sasmodels/data.py (modified) * sasmodels/direct_model.py (modified) * sasmodels/generate.py (modified) * sasmodels/kernel_header.c (modified) * sasmodels/kernelcl.py (modified) * sasmodels/kerneldll.py (modified) * sasmodels/kernelpy.py (modified) * sasmodels/list_pars.py (modified) * sasmodels/model_test.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/adsorbed_layer.py (modified) * sasmodels/models/barbell.py (modified) * sasmodels/models/bcc_paracrystal.c (modified) * sasmodels/models/bcc_paracrystal.py (modified) * sasmodels/models/be_polyelectrolyte.py (modified) * sasmodels/models/binary_hard_sphere.py (modified) * sasmodels/models/broad_peak.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_multi_shell.py (modified) * sasmodels/models/core_shell_bicelle.c (modified) * sasmodels/models/core_shell_bicelle.py (modified) * sasmodels/models/core_shell_bicelle_elliptical.c (modified) * sasmodels/models/core_shell_bicelle_elliptical.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/core_shell_ellipsoid.py (modified) * sasmodels/models/core_shell_parallelepiped.c (modified) * sasmodels/models/core_shell_parallelepiped.py (modified) * sasmodels/models/core_shell_sphere.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/dab.py (modified) * sasmodels/models/ellipsoid.c (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/elliptical_cylinder.c (modified) * sasmodels/models/elliptical_cylinder.py (modified) * sasmodels/models/fcc_paracrystal.c (modified) * sasmodels/models/fcc_paracrystal.py (modified) * sasmodels/models/flexible_cylinder.py (modified) * sasmodels/models/flexible_cylinder_elliptical.py (modified) * sasmodels/models/fractal.py (modified) * sasmodels/models/fractal_core_shell.py (modified) * sasmodels/models/fuzzy_sphere.py (modified) * sasmodels/models/gauss_lorentz_gel.py (modified) * sasmodels/models/gaussian_peak.py (modified) * sasmodels/models/gel_fit.c (modified) * sasmodels/models/gel_fit.py (modified) * sasmodels/models/guinier.py (modified) * sasmodels/models/guinier_porod.py (modified) * sasmodels/models/hardsphere.py (modified) * sasmodels/models/hayter_msa.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/hollow_rectangular_prism.py (modified) * sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified) * sasmodels/models/img/bcc_angle_definition.png (deleted) * sasmodels/models/img/cylinder_angle_definition.jpg (deleted) * sasmodels/models/img/cylinder_angle_definition.png (added) * sasmodels/models/img/cylinder_angle_projection.jpg (deleted) * sasmodels/models/img/cylinder_angle_projection.png (added) * sasmodels/models/img/elliptical_cylinder_angle_definition.jpg (deleted) * sasmodels/models/img/elliptical_cylinder_angle_definition.png (added) * sasmodels/models/img/elliptical_cylinder_angle_projection.png (added) * sasmodels/models/img/parallelepiped_angle_definition.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_definition.png (added) * sasmodels/models/img/parallelepiped_angle_projection.jpg (deleted) * sasmodels/models/img/parallelepiped_angle_projection.png (added) * sasmodels/models/img/sc_crystal_angle_definition.jpg (deleted) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.jpg (deleted) * sasmodels/models/img/triaxial_ellipsoid_angle_projection.png (added) * sasmodels/models/lamellar.py (modified) * sasmodels/models/lamellar_hg.py (modified) * sasmodels/models/lamellar_hg_stack_caille.py (modified) * sasmodels/models/lamellar_stack_caille.py (modified) * sasmodels/models/lamellar_stack_paracrystal.py (modified) * sasmodels/models/lib/sas_3j1x_x.c (modified) * sasmodels/models/lib/sas_J0.c (modified) * sasmodels/models/lib/sas_J1.c (modified) * sasmodels/models/lib/sas_erf.c (modified) * sasmodels/models/line.py (modified) * sasmodels/models/linear_pearls.py (modified) * sasmodels/models/lorentz.py (modified) * sasmodels/models/mass_fractal.py (modified) * sasmodels/models/mass_surface_fractal.py (modified) * sasmodels/models/mono_gauss_coil.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/models/onion.py (modified) * sasmodels/models/parallelepiped.c (modified) * sasmodels/models/parallelepiped.py (modified) * sasmodels/models/peak_lorentz.py (modified) * sasmodels/models/pearl_necklace.py (modified) * sasmodels/models/poly_gauss_coil.py (modified) * sasmodels/models/polymer_excl_volume.py (modified) * sasmodels/models/polymer_micelle.py (modified) * sasmodels/models/porod.py (modified) * sasmodels/models/power_law.py (modified) * sasmodels/models/pringle.py (modified) * sasmodels/models/raspberry.py (modified) * sasmodels/models/rectangular_prism.py (modified) * sasmodels/models/sc_paracrystal.c (modified) * sasmodels/models/sc_paracrystal.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/spherical_sld.c (modified) * sasmodels/models/spherical_sld.py (modified) * sasmodels/models/spinodal.py (modified) * sasmodels/models/squarewell.py (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/star_polymer.py (modified) * sasmodels/models/stickyhardsphere.py (modified) * sasmodels/models/surface_fractal.py (modified) * sasmodels/models/teubner_strey.py (modified) * sasmodels/models/triaxial_ellipsoid.c (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) * sasmodels/models/two_lorentzian.py (modified) * sasmodels/models/two_power_law.py (modified) * sasmodels/models/unified_power_Rg.py (modified) * sasmodels/models/vesicle.py (modified) * sasmodels/product.py (modified) * sasmodels/resolution.py (modified) * sasmodels/rst2html.py (modified) * sasmodels/sasview_model.py (modified) * sasmodels/sesans.py (modified) * doc/guide/magnetism/mag_img/M_angles_pic.bmp (deleted) * doc/guide/magnetism/mag_img/mag_vector.bmp (deleted) * doc/ref/magnetism/mag_img/mag_vector.png (added) * doc/rst_prolog (modified) Merge branch 'master' into ticket-510 Thu, 17 Aug 2017 09:18:59 GMT wojciech [f8a2baa] * doc/guide/install.rst (modified) * doc/guide/pd/polydispersity.rst (modified) * doc/guide/resolution.rst (modified) Minor edits to rst files Thu, 17 Aug 2017 08:59:19 GMT GitHub [f0fc507] * doc/guide/sesans/sans_to_sesans.rst (modified) Clarification of the Hankel transform I've tried to tidy up the ... Tue, 08 Aug 2017 22:18:53 GMT Paul Kienzle [870a2f4] * doc/developer/calculator.rst (modified) * doc/developer/overview.rst (modified) * doc/guide/gpu/gpu_computations.rst (deleted) * doc/guide/gpu/opencl_installation.rst (deleted) * doc/guide/plugin.rst (modified) * sasmodels/alignment.py (modified) * sasmodels/models/multilayer_vesicle.py (modified) * sasmodels/rst2html.py (modified) fix doc builds Fri, 16 Jun 2017 14:01:31 GMT Paul Kienzle [b52e00f] * doc/guide/gpu/gpu_computations.rst (modified) * explore/J1.py (deleted) * explore/J1c.py (deleted) * explore/cyl.py (deleted) * explore/lgamma.py (deleted) * explore/log_gamma.py (deleted) * explore/precision.py (added) * explore/sinc.py (deleted) * explore/sph_j1c.py (deleted) * sasmodels/generate.py (modified) * sasmodels/kernel_header.c (modified) * sasmodels/kernelcl.py (modified) * sasmodels/model_test.py (modified) * sasmodels/modelinfo.py (modified) * sasmodels/models/hollow_cylinder.py (modified) * sasmodels/models/lib/sas_3j1x_x.c (modified) * sasmodels/models/lib/sas_J0.c (modified) * sasmodels/models/lib/sas_J1.c (modified) * sasmodels/models/lib/sas_erf.c (modified) * sasmodels/models/stacked_disks.py (modified) * sasmodels/models/two_power_law.py (modified) * .gitignore (modified) * doc/conf.py (modified) * doc/developer/calculator.rst (modified) * doc/developer/index.rst (modified) * doc/developer/overview.rst (added) * doc/genapi.py (modified) * doc/gentoc.py (modified) * doc/guide/gpu/opencl_installation.rst (moved) * doc/guide/index.rst (modified) * doc/guide/install.rst (added) * doc/guide/intro.rst (added) * doc/guide/magnetism/mag_img/M_angles_pic.bmp (moved) * doc/guide/magnetism/mag_img/mag_vector.bmp (moved) * doc/guide/magnetism/magnetism.rst (moved) * doc/guide/pd/pd_gaussian.jpg (added) * doc/guide/pd/pd_lognormal.jpg (added) * doc/guide/pd/pd_rectangular.jpg (added) * doc/guide/pd/pd_schulz.jpg (added) * doc/guide/pd/polydispersity.rst (added) * doc/guide/plugin.rst (added) * doc/guide/refs.rst (moved) * doc/guide/resolution.rst (added) * doc/guide/resolution_2d_rotation.gif (added) * doc/guide/scripting.rst (added) * doc/guide/sesans/SESANSinSASVIEW.pdf (moved) * doc/guide/sesans/sans_to_sesans.rst (added) * doc/guide/sesans/sesans_fitting.rst (moved) * doc/guide/sesans/sesans_img/HardSphereLineFitSasView.png (moved) * doc/guide/sesans/sesans_img/SphereLineFitSasView.png (moved) * doc/index.rst (modified) * doc/ref/index.rst (deleted) * doc/ref/intro.rst (deleted) * doc/ref/sesans/sans_to_sesans.rst (deleted) * example/cylinder_eval.py (added) * example/model.py (modified) * sasmodels/core.py (modified) * sasmodels/resolution.py (modified) * sasmodels/rst2html.py (modified) Merge branch 'master' into doc_update Mon, 08 May 2017 06:16:09 GMT Paul Kienzle [2e66ef5] * doc/developer/calculator.rst (modified) * doc/developer/index.rst (modified) * doc/developer/overview.rst (added) * doc/genapi.py (modified) * doc/guide/index.rst (modified) * doc/guide/scripting.rst (added) * example/cylinder_eval.py (added) * example/model.py (modified) * sasmodels/core.py (modified) add a short scripting guide; start in on developer docs Mon, 08 May 2017 03:20:44 GMT Paul Kienzle [990d8df] * doc/gentoc.py (modified) * doc/guide/gpu/opencl_installation.rst (modified) * doc/guide/index.rst (modified) * doc/guide/install.rst (added) * doc/guide/magnetism/magnetism.rst (modified) * doc/guide/pd/pd_gaussian.jpg (added) * doc/guide/pd/pd_lognormal.jpg (added) * doc/guide/pd/pd_rectangular.jpg (added) * doc/guide/pd/pd_schulz.jpg (added) * doc/guide/pd/polydispersity.rst (added) * doc/guide/plugin.rst (added) * doc/guide/resolution.rst (added) * doc/guide/resolution_2d_rotation.gif (added) * sasmodels/resolution.py (modified) * sasmodels/rst2html.py (modified) move polydispersity and resolution docs into sasmodels; write ... Sun, 07 May 2017 20:24:16 GMT Paul Kienzle [8ae8532] * .gitignore (modified) * doc/conf.py (modified) * doc/genapi.py (modified) * doc/gentoc.py (modified) * doc/guide/gpu/gpu_computations.rst (moved) * doc/guide/gpu/opencl_installation.rst (moved) * doc/guide/index.rst (modified) * doc/guide/intro.rst (added) * doc/guide/magnetism/mag_img/M_angles_pic.bmp (moved) * doc/guide/magnetism/mag_img/mag_vector.bmp (moved) * doc/guide/magnetism/magnetism.rst (moved) * doc/guide/refs.rst (moved) * doc/guide/sesans/SESANSinSASVIEW.pdf (moved) * doc/guide/sesans/sans_to_sesans.rst (added) * doc/guide/sesans/sesans_fitting.rst (moved) * doc/guide/sesans/sesans_img/HardSphereLineFitSasView.png (moved) * doc/guide/sesans/sesans_img/SphereLineFitSasView.png (moved) * doc/index.rst (modified) * doc/ref/index.rst (deleted) * doc/ref/intro.rst (deleted) * doc/ref/sesans/sans_to_sesans.rst (deleted) * sasmodels/rst2html.py (modified) doc reorg Thu, 04 Feb 2016 17:39:22 GMT Paul Kienzle [bb6f0f3] * doc/guide/index.rst (modified) docs Wed, 03 Sep 2014 07:16:10 GMT Paul Kienzle [19dcb933] * README.rst (moved) * doc/Makefile (added) * doc/README.txt (added) * doc/_extensions/dollarmath.py (added) * doc/_extensions/numfig.py (added) * doc/conf.py (added) * doc/genapi.py (added) * doc/genmodel.py (added) * doc/guide/index.rst (added) * doc/index.rst (added) * doc/make.bat (added) * doc/models/cylinders.rst (added) * doc/models/ellipsoids.rst (added) * doc/models/index.rst (added) * doc/models/intro.rst (added) * doc/models/lamellae.rst (added) * doc/models/models.rst (added) * doc/models/refs.rst (added) * doc/models/shapes.rst (added) * doc/models/spheres.rst (added) * doc/rst_prolog (added) * sasmodels/__init__.py (modified) * sasmodels/gen.py (modified) * sasmodels/models/capped_cylinder.py (modified) * sasmodels/models/core_shell_cylinder.py (modified) * sasmodels/models/cylinder.py (modified) * sasmodels/models/cylinder_clone.py (modified) * sasmodels/models/ellipsoid.py (modified) * sasmodels/models/lamellar.py (modified) * sasmodels/models/sphere.py (modified) * sasmodels/models/triaxial_ellipsoid.py (modified) build docs for models