#
# ChangeLog for / in sasmodels
#
# Generated by Trac 1.0.1
# May 23, 2024 10:54:09 AM

Tue, 25 Oct 2016 23:20:46 GMT Paul Kienzle <pkienzle@…> [0890871]
	* sasmodels/rst2html.py (modified)

	display stand alone rst file in html


Tue, 25 Oct 2016 00:42:26 GMT Paul Kienzle <pkienzle@…> [999c87f]
	* sasmodels/convert.py (modified)

	code formatting


Tue, 25 Oct 2016 00:17:19 GMT Paul Kienzle <pkienzle@…> [aea515c]
	* sasmodels/conversion_table.py (modified)
	* sasmodels/convert.py (modified)

	convert model parameters from SasView 3.1 to sasmodels


Thu, 20 Oct 2016 21:58:39 GMT Paul Kienzle <pkienzle@…> [97f9b46]
	* sasmodels/models/lib/sas_gamma.c (modified)

	tgamma: better handling of gamma(x) for x<0


Thu, 20 Oct 2016 20:55:35 GMT Paul Kienzle <pkienzle@…> [ca9e54e]
	* sasmodels/compare.py (modified)

	sascomp: allow interactive comparison of different model sets


Thu, 20 Oct 2016 20:54:06 GMT Paul Kienzle <pkienzle@…> [bbc2b34]
	* sasmodels/modelinfo.py (modified)

	lint cleanup


Thu, 20 Oct 2016 20:52:31 GMT Paul Kienzle <pkienzle@…> [f8f0991]
	* sasmodels/models/hollow_cylinder.c (modified)

	hollow_cylinder: note limiting cases in comments, but do not
	implement


Thu, 20 Oct 2016 20:50:48 GMT Paul Kienzle <pkienzle@…> [5c94f41]
	* sasmodels/models/surface_fractal.py (modified)

	surface_fractal: remove reference to volume fraction from description
	of ...


Thu, 20 Oct 2016 20:48:48 GMT Paul Kienzle <pkienzle@…> [217590b]
	* sasmodels/models/fractal.c (modified)
	* sasmodels/models/fractal.py (modified)
	* sasmodels/models/fractal_core_shell.c (modified)
	* sasmodels/models/fractal_core_shell.py (modified)
	* sasmodels/models/lib/fractal_sq.c (added)
	* sasmodels/models/lib/sas_gamma.c (modified)

	fractal, fractal_core_shell: support fractal_dim as low as 0.


Wed, 19 Oct 2016 11:35:32 GMT Paul Kienzle <pkienzle@…> [b829b16]
	* sasmodels/models/core_shell_bicelle.py (modified)
	* sasmodels/models/cylinder.c (modified)

	merge


Wed, 19 Oct 2016 04:54:57 GMT Paul Kienzle <pkienzle@…> [f0afad2]
	* sasmodels/models/poly_gauss_coil.py (modified)

	poly_gauss_coil: improved accuracy


Wed, 19 Oct 2016 02:32:18 GMT Paul Kienzle <pkienzle@…> [6d96b66]
	* sasmodels/models/fractal.c (modified)
	* sasmodels/models/fractal.py (modified)
	* sasmodels/models/fractal_core_shell.c (modified)
	* sasmodels/models/fractal_core_shell.py (modified)
	* sasmodels/models/mass_fractal.c (modified)
	* sasmodels/models/mass_fractal.py (modified)
	* sasmodels/models/mass_surface_fractal.c (modified)
	* sasmodels/models/mass_surface_fractal.py (modified)

	fractal models: handle limits of q=0 and dim=1


Wed, 19 Oct 2016 02:31:22 GMT Paul Kienzle <pkienzle@…> [3e8ea5d]
	* sasmodels/compare.py (modified)

	constrain pearls to be bigger than string


Wed, 19 Oct 2016 01:09:23 GMT Paul Kienzle <pkienzle@…> [c3ebc71]
	* sasmodels/models/polymer_micelle.c (modified)

	polymer_micelle: minor code cleanup


Tue, 18 Oct 2016 15:45:37 GMT Paul Kienzle <pkienzle@…> [ed23abe]
	* sasmodels/models/hollow_cylinder.c (modified)

	hollow_cylinder: fix errors introduced by code cleanup


Tue, 18 Oct 2016 15:34:18 GMT Paul Kienzle <pkienzle@…> [6f676fb]
	* sasmodels/models/hollow_rectangular_prism.c (modified)

	hollow_rectangular_prism: code cleanup, and 2x faster with
	precomputed ...


Tue, 18 Oct 2016 15:10:48 GMT Paul Kienzle <pkienzle@…> [251f54b]
	* sasmodels/models/elliptical_cylinder.c (modified)

	elliptical_cylinder: remove unused _kernel function


Tue, 18 Oct 2016 15:08:53 GMT Paul Kienzle <pkienzle@…> [0a3d9b2]
	* sasmodels/models/core_shell_ellipsoid.c (modified)

	code cleanup


Tue, 18 Oct 2016 14:32:55 GMT Paul Kienzle <pkienzle@…> [3ac4e1b]
	* sasmodels/models/stacked_disks.c (modified)

	stacked_disks: code tidying


Tue, 18 Oct 2016 14:28:25 GMT Paul Kienzle <pkienzle@…> [158cee4]
	* sasmodels/compare.py (modified)

	sascomp: apply constraints on random parameters before evaluating ...


Tue, 18 Oct 2016 02:35:02 GMT Paul Kienzle <pkienzle@…> [b6f10d8]
	* sasmodels/compare.py (modified)

	sascomp: default to pd_n=35 if pd given on command line


Tue, 18 Oct 2016 02:06:32 GMT Paul Kienzle <pkienzle@…> [0b040de]
	* sasmodels/compare.py (modified)

	nicer formatting for magnetic parameters in parameter summary table


Mon, 17 Oct 2016 17:53:08 GMT Paul Kienzle <pkienzle@…> [73e08ae]
	* sasmodels/models/core_shell_ellipsoid.py (modified)
	* sasmodels/models/cylinder.c (modified)
	* sasmodels/models/ellipsoid.c (modified)

	core_shell_ellipsoid, cylinder, ellipsoid: code cleanup


Mon, 17 Oct 2016 17:49:41 GMT Paul Kienzle <pkienzle@…> [92ce163]
	* sasmodels/models/flexible_cylinder_elliptical.c (modified)
	* sasmodels/models/lib/wrc_cyl.c (modified)

	fix error introduced with conversion to Horner's method; code cleanup


Mon, 17 Oct 2016 17:46:14 GMT Paul Kienzle <pkienzle@…> [9aa4881]
	* sasmodels/models/core_shell_cylinder.c (modified)

	fix error introduced with sas_J1c() usage 'correction'; accidentally ...


Mon, 17 Oct 2016 17:42:01 GMT Paul Kienzle <pkienzle@…> [f719764]
	* sasmodels/models/lib/Si.c (modified)

	fix error introduced when converting to SINCOS macro and Horner's
	method ...


Mon, 17 Oct 2016 17:38:58 GMT Paul Kienzle <pkienzle@…> [2126131]
	* sasmodels/models/pearl_necklace.c (modified)
	* sasmodels/models/pearl_necklace.py (modified)

	pearl necklace: code cleanup; use sph_j1c; force num_pearls to
	integer ...


Mon, 17 Oct 2016 17:27:27 GMT Paul Kienzle <pkienzle@…> [9762341]
	* sasmodels/models/onion.c (modified)
	* sasmodels/models/onion.py (modified)

	onion: update variables to match parameter names


Mon, 17 Oct 2016 17:24:43 GMT Paul Kienzle <pkienzle@…> [8393c74]
	* sasmodels/models/teubner_strey.py (modified)

	teubner-strey: code cleanup


Mon, 17 Oct 2016 17:20:39 GMT Paul Kienzle <pkienzle@…> [1b49bf8]
	* sasmodels/conversion_table.py (modified)
	* sasmodels/convert.py (modified)

	update conversion tables corresponding to the great parameter shift


Mon, 17 Oct 2016 15:11:17 GMT Paul Kienzle <pkienzle@…> [218cdbc]
	* sasmodels/kernel_header.c (modified)

	use SasView 3.x definition of angles for now


Mon, 17 Oct 2016 15:10:07 GMT Paul Kienzle <pkienzle@…> [52e9a45]
	* sasmodels/core.py (modified)

	type hinting


Mon, 17 Oct 2016 15:09:44 GMT Paul Kienzle <pkienzle@…> [248561a]
	* sasmodels/compare.py (modified)

	allow math functions such as sqrt and atan in parameter expressions


Sun, 16 Oct 2016 20:38:03 GMT Paul Kienzle <pkienzle@…> [7fcdc9f]
	* sasmodels/generate.py (modified)
	* sasmodels/kernelcl.py (modified)

	OpenCL: use checksum to distinguish between kernels with the same
	name


Sun, 16 Oct 2016 20:14:15 GMT Paul Kienzle <pkienzle@…> [ff1fff5]
	* sasmodels/compare.py (modified)
	* README.rst (modified)
	* sasmodels/conversion_table.py (modified)
	* sasmodels/kernel_header.c (modified)
	* sasmodels/models/barbell.c (modified)
	* sasmodels/models/bcc_paracrystal.c (modified)
	* sasmodels/models/binary_hard_sphere.c (modified)
	* sasmodels/models/capped_cylinder.c (modified)
	* sasmodels/models/core_shell_bicelle.c (modified)
	* sasmodels/models/core_shell_cylinder.c (modified)
	* sasmodels/models/core_shell_ellipsoid.c (modified)
	* sasmodels/models/core_shell_parallelepiped.c (modified)
	* sasmodels/models/core_shell_parallelepiped.py (modified)
	* sasmodels/models/core_shell_sphere.c (modified)
	* sasmodels/models/core_shell_sphere.py (modified)
	* sasmodels/models/cylinder.c (modified)
	* sasmodels/models/dab.py (modified)
	* sasmodels/models/ellipsoid.c (modified)
	* sasmodels/models/elliptical_cylinder.c (modified)
	* sasmodels/models/fcc_paracrystal.c (modified)
	* sasmodels/models/flexible_cylinder_elliptical.c (modified)
	* sasmodels/models/fractal_core_shell.c (modified)
	* sasmodels/models/fractal_core_shell.py (modified)
	* sasmodels/models/fuzzy_sphere.py (modified)
	* sasmodels/models/hayter_msa.c (modified)
	* sasmodels/models/hollow_cylinder.c (modified)
	* sasmodels/models/hollow_rectangular_prism.c (modified)
	* sasmodels/models/hollow_rectangular_prism.py (modified)
	* sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified)
	* sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified)
	* sasmodels/models/lamellar_stack_paracrystal.c (modified)
	* sasmodels/models/lib/Si.c (modified)
	* sasmodels/models/lib/core_shell.c (modified)
	* sasmodels/models/lib/gfn.c (modified)
	* sasmodels/models/lib/wrc_cyl.c (modified)
	* sasmodels/models/linear_pearls.c (modified)
	* sasmodels/models/linear_pearls.py (modified)
	* sasmodels/models/mass_fractal.c (modified)
	* sasmodels/models/mass_surface_fractal.c (modified)
	* sasmodels/models/multilayer_vesicle.c (modified)
	* sasmodels/models/parallelepiped.c (modified)
	* sasmodels/models/parallelepiped.py (modified)
	* sasmodels/models/pearl_necklace.c (modified)
	* sasmodels/models/pearl_necklace.py (modified)
	* sasmodels/models/porod.py (modified)
	* sasmodels/models/rectangular_prism.c (modified)
	* sasmodels/models/rectangular_prism.py (modified)
	* sasmodels/models/sc_paracrystal.c (modified)
	* sasmodels/models/stacked_disks.c (modified)
	* sasmodels/models/star_polymer.c (modified)
	* sasmodels/models/surface_fractal.c (modified)
	* sasmodels/models/surface_fractal.py (modified)
	* sasmodels/models/teubner_strey.py (modified)
	* sasmodels/models/triaxial_ellipsoid.c (modified)
	* sasmodels/models/vesicle.c (modified)
	* sasmodels/models/vesicle.py (modified)

	allow comparison of different models, such as 'sascomp
	sphere:ellipsoid ...


Sun, 16 Oct 2016 16:25:50 GMT Paul Kienzle <pkienzle@…> [4f79d94]
	* sasmodels/models/binary_hard_sphere.c (modified)

	binary_hard_sphere: remove commented-out code for sph_j1c


Sun, 16 Oct 2016 04:33:26 GMT Paul Kienzle <pkienzle@…> [68425bf]
	* sasmodels/conversion_table.py (modified)
	* sasmodels/models/elliptical_cylinder.c (modified)

	elliptical_cylinder: use ORIENT macros and simplify code


Sat, 15 Oct 2016 22:39:55 GMT Paul Kienzle <pkienzle@…> [e30d645]
	* README.rst (modified)

	remove out of date magnetism note from README


Sat, 15 Oct 2016 21:49:53 GMT Paul Kienzle <pkienzle@…> [ab2aea8]
	* sasmodels/models/hollow_rectangular_prism.c (modified)
	* sasmodels/models/hollow_rectangular_prism.py (modified)
	* sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified)
	* sasmodels/models/hollow_rectangular_prism_thin_walls.py (modified)
	* sasmodels/models/rectangular_prism.c (modified)
	* sasmodels/models/rectangular_prism.py (modified)

	code cleanup for rectangular prism models


Sat, 15 Oct 2016 21:21:48 GMT Paul Kienzle <pkienzle@…> [ed0827a]
	* sasmodels/models/parallelepiped.py (modified)

	parallelepiped: scale demo sld parameters by 1e6


Sat, 15 Oct 2016 18:17:44 GMT Paul Kienzle <pkienzle@…> [2941abf]
	* sasmodels/models/rectangular_prism.py (modified)

	rectangular prism: clean up equation formatting


Sat, 15 Oct 2016 16:37:09 GMT Paul Kienzle <pkienzle@…> [14838a3]
	* sasmodels/conversion_table.py (modified)
	* sasmodels/models/core_shell_parallelepiped.c (modified)
	* sasmodels/models/core_shell_parallelepiped.py (modified)
	* sasmodels/models/parallelepiped.c (modified)

	update parallelepiped and core_shell_parallelepiped to use ORIENT
	macros


Fri, 14 Oct 2016 22:49:58 GMT Paul Kienzle <pkienzle@…> [4962519]
	* sasmodels/models/bcc_paracrystal.c (modified)
	* sasmodels/models/core_shell_sphere.py (modified)
	* sasmodels/models/dab.py (modified)
	* sasmodels/models/fcc_paracrystal.c (modified)
	* sasmodels/models/flexible_cylinder_elliptical.c (modified)
	* sasmodels/models/fractal_core_shell.py (modified)
	* sasmodels/models/hayter_msa.c (modified)
	* sasmodels/models/lamellar_stack_paracrystal.c (modified)
	* sasmodels/models/lib/wrc_cyl.c (modified)
	* sasmodels/models/linear_pearls.c (modified)
	* sasmodels/models/linear_pearls.py (modified)
	* sasmodels/models/pearl_necklace.py (modified)
	* sasmodels/models/porod.py (modified)
	* sasmodels/models/sc_paracrystal.c (modified)
	* sasmodels/models/teubner_strey.py (modified)

	use square and cube instead of pow()


Fri, 14 Oct 2016 22:07:28 GMT Paul Kienzle <pkienzle@…> [a5b6997]
	* sasmodels/models/lib/Si.c (modified)

	Si: Use Horner's method when computing the Sine integral


Fri, 14 Oct 2016 21:23:40 GMT Paul Kienzle <pkienzle@…> [3a48772]
	* sasmodels/models/barbell.c (modified)
	* sasmodels/models/binary_hard_sphere.c (modified)
	* sasmodels/models/capped_cylinder.c (modified)
	* sasmodels/models/core_shell_parallelepiped.c (modified)
	* sasmodels/models/core_shell_sphere.c (modified)
	* sasmodels/models/flexible_cylinder_elliptical.c (modified)
	* sasmodels/models/fractal_core_shell.c (modified)
	* sasmodels/models/fuzzy_sphere.py (modified)
	* sasmodels/models/hayter_msa.c (modified)
	* sasmodels/models/hollow_rectangular_prism.c (modified)
	* sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified)
	* sasmodels/models/lib/core_shell.c (modified)
	* sasmodels/models/lib/gfn.c (modified)
	* sasmodels/models/linear_pearls.c (modified)
	* sasmodels/models/mass_fractal.c (modified)
	* sasmodels/models/mass_surface_fractal.c (modified)
	* sasmodels/models/multilayer_vesicle.c (modified)
	* sasmodels/models/parallelepiped.c (modified)
	* sasmodels/models/pearl_necklace.c (modified)
	* sasmodels/models/rectangular_prism.c (modified)
	* sasmodels/models/sc_paracrystal.c (modified)
	* sasmodels/models/star_polymer.c (modified)
	* sasmodels/models/triaxial_ellipsoid.c (modified)
	* sasmodels/models/vesicle.c (modified)
	* sasmodels/models/vesicle.py (modified)

	use predefined constants for fractions of pi


Fri, 14 Oct 2016 21:20:17 GMT Paul Kienzle <pkienzle@…> [b716cc6]
	* sasmodels/models/surface_fractal.c (modified)
	* sasmodels/models/surface_fractal.py (modified)

	surface_fractal: document usable q range; suppress negative values ...


Fri, 14 Oct 2016 21:18:34 GMT Paul Kienzle <pkienzle@…> [6831fa0]
	* sasmodels/compare.py (modified)
	* sasmodels/conversion_table.py (modified)
	* sasmodels/models/stacked_disks.c (modified)

	stacked_disks: enable 2D modeling for stacked disks


Fri, 14 Oct 2016 20:12:22 GMT Paul Kienzle <pkienzle@…> [87bc707]
	* sasmodels/models/binary_hard_sphere.c (modified)
	* sasmodels/models/flexible_cylinder_elliptical.c (modified)
	* sasmodels/models/hollow_rectangular_prism.c (modified)
	* sasmodels/models/hollow_rectangular_prism_thin_walls.c (modified)
	* sasmodels/models/rectangular_prism.c (modified)

	remove trivial Iqxy() functions; let generate.py create them ...


Fri, 14 Oct 2016 20:09:58 GMT Paul Kienzle <pkienzle@…> [9068f4c]
	* sasmodels/compare.py (modified)

	fix -hist option on sascomp


Fri, 14 Oct 2016 20:05:39 GMT Paul Kienzle <pkienzle@…> [5bddd89]
	* sasmodels/models/capped_cylinder.c (modified)
	* sasmodels/models/core_shell_bicelle.c (modified)
	* sasmodels/models/core_shell_cylinder.c (modified)
	* sasmodels/models/core_shell_ellipsoid.c (modified)
	* sasmodels/models/ellipsoid.c (modified)
	* sasmodels/models/hollow_cylinder.c (modified)

	use ORIENT macro for remaining symmetric models


Fri, 14 Oct 2016 16:53:59 GMT Paul Kienzle <pkienzle@…> [0b717c5]
	* sasmodels/models/bcc_paracrystal.c (modified)
	* sasmodels/models/fcc_paracrystal.c (modified)
	* sasmodels/models/sc_paracrystal.c (modified)

	bcc/fcc/sc: slightly slower but more robust calculation of Zq


Fri, 14 Oct 2016 13:56:55 GMT Paul Kienzle <pkienzle@…> [ec9d329]
	* sasmodels/models/fcc_paracrystal.c (modified)

	one more factor of 2.0 for fcc, and now it matches


Fri, 14 Oct 2016 12:03:06 GMT Paul Kienzle <pkienzle@…> [5abbad7]
	* sasmodels/models/fcc_paracrystal.c (modified)

	use sasview 3.1 formula for 2d fcc


Fri, 14 Oct 2016 07:18:32 GMT Paul Kienzle <pkienzle@…> [a0d75ce]
	* sasmodels/compare.py (modified)

	add title option to sascomp to provide more details on the graph


Fri, 14 Oct 2016 07:13:55 GMT Paul Kienzle <pkienzle@…> [11ca2ab]
	* sasmodels/kernel_header.c (modified)
	* sasmodels/models/barbell.c (modified)
	* sasmodels/models/bcc_paracrystal.c (modified)
	* sasmodels/models/cylinder.c (modified)
	* sasmodels/models/fcc_paracrystal.c (modified)
	* sasmodels/models/sc_paracrystal.c (modified)
	* sasmodels/models/triaxial_ellipsoid.c (modified)

	add macros for theta-phi-psi orientation


Thu, 13 Oct 2016 04:35:53 GMT Paul Kienzle <pkienzle@…> [a80e64c]
	* sasmodels/sasview_model.py (modified)

	add sasview compatible MultiplicationModel interface to product model


Thu, 13 Oct 2016 04:35:20 GMT Paul Kienzle <pkienzle@…> [9951a86]
	* sasmodels/product.py (modified)

	fix product model for structure factors with parameters


Tue, 11 Oct 2016 20:36:42 GMT Paul Kienzle <pkienzle@…> [12eb36b]
	* explore/angular_pd.py (added)

	app to explore angular dispersity mesh


Tue, 11 Oct 2016 18:06:46 GMT dirk [ef5a314]
	* sasmodels/models/core_shell_ellipsoid.py (modified)
	* sasmodels/models/img/cylinder_angle_definition.jpg (modified)
	* sasmodels/models/stacked_disks.py (modified)

	After rewriting angles to spherical coordinates unit test fails


Tue, 11 Oct 2016 17:42:26 GMT dirk [1fdb555]
	* sasmodels/models/core_shell_bicelle.py (modified)
	* sasmodels/models/multilayer_vesicle.py (modified)
	* sasmodels/sasview_model.py (modified)
	* sasmodels/kernel_template.c (modified)
	* sasmodels/kernelpy.py (modified)
	* sasmodels/models/barbell.c (modified)
	* sasmodels/models/barbell.py (modified)
	* sasmodels/models/capped_cylinder.c (modified)
	* sasmodels/models/capped_cylinder.py (modified)
	* sasmodels/models/core_shell_bicelle.c (modified)
	* sasmodels/models/core_shell_cylinder.c (modified)
	* sasmodels/models/core_shell_ellipsoid.c (modified)
	* sasmodels/models/cylinder.c (modified)
	* sasmodels/models/cylinder.py (modified)
	* sasmodels/models/ellipsoid.c (modified)
	* sasmodels/models/ellipsoid.py (modified)
	* sasmodels/models/hollow_cylinder.c (modified)
	* sasmodels/models/img/cylinder_angle_definition.jpg (modified)
	* sasmodels/models/stacked_disks.c (modified)
	* sasmodels/models/stacked_disks.py (modified)

	Merge branch 'master' of https://github.com/SasView/sasmodels


Tue, 11 Oct 2016 17:42:00 GMT dirk [0d6e865]
	* sasmodels/kernel_template.c (modified)
	* sasmodels/kernelpy.py (modified)
	* sasmodels/models/barbell.c (modified)
	* sasmodels/models/barbell.py (modified)
	* sasmodels/models/capped_cylinder.c (modified)
	* sasmodels/models/capped_cylinder.py (modified)
	* sasmodels/models/core_shell_bicelle.c (modified)
	* sasmodels/models/core_shell_bicelle.py (modified)
	* sasmodels/models/core_shell_cylinder.c (modified)
	* sasmodels/models/core_shell_ellipsoid.c (modified)
	* sasmodels/models/cylinder.c (modified)
	* sasmodels/models/cylinder.py (modified)
	* sasmodels/models/ellipsoid.c (modified)
	* sasmodels/models/ellipsoid.py (modified)
	* sasmodels/models/hollow_cylinder.c (modified)
	* sasmodels/models/img/cylinder_angle_definition.jpg (modified)
	* sasmodels/models/stacked_disks.c (modified)
	* sasmodels/models/stacked_disks.py (modified)

	Rewriting selected models in spherical coordinates. This fixes ticket ...


Tue, 11 Oct 2016 15:06:46 GMT richardh [483a022]
	* sasmodels/sasview_model.py (modified)
	* sasmodels/models/core_shell_bicelle.py (modified)
	* sasmodels/models/multilayer_vesicle.py (modified)

	Merge branch 'master' of https://github.com/sasview/sasmodels


Tue, 11 Oct 2016 15:06:38 GMT richardh [041bc75]
	* sasmodels/models/core_shell_bicelle.py (modified)
	* sasmodels/models/multilayer_vesicle.py (modified)

	better equations in multilayer_vesicle and typo sorted in ...


Tue, 11 Oct 2016 14:57:58 GMT mathieu [64f0a1c]
	* sasmodels/sasview_model.py (modified)

	Make sure Sum|Multi models are not loaded a second time as _user. Re ...


Mon, 10 Oct 2016 22:08:15 GMT richardh [19e7ca7]
	* sasmodels/models/multilayer_vesicle.py (modified)

	another change to multilayer_vesicle docu


Mon, 10 Oct 2016 20:50:44 GMT richardh [3b681fa]
	* sasmodels/models/multilayer_vesicle.py (modified)

	another edit to multilayer_vesicle docu


Mon, 10 Oct 2016 19:57:25 GMT mathieu [e4bf271]
	* sasmodels/sasview_model.py (modified)

	Make sure plug-ins work with multiplication model. Re #751


Mon, 10 Oct 2016 18:56:16 GMT Paul Kienzle <pkienzle@…> [234c532]
	* sasmodels/compare.py (modified)
	* sasmodels/generate.py (modified)

	add -html option to sascomp to show the model help


Mon, 10 Oct 2016 18:51:17 GMT wojciech [689b7c4]
	* sasmodels/custom/__init__.py (modified)
	* sasmodels/model_test.py (modified)
	* sasmodels/models/multilayer_vesicle.py (modified)
	* sasmodels/models/vesicle.py (modified)
	* sasmodels/sasview_model.py (modified)

	Removing try/except clause that wasn't properly handled


Mon, 10 Oct 2016 18:50:06 GMT wojciech [9f37726]
	* sasmodels/sasview_model.py (modified)

	Removing try/except clause that wasn't properly handled


Mon, 10 Oct 2016 18:14:26 GMT mathieu [20a70bc]
	* sasmodels/sasview_model.py (modified)

	Make sure old-style v3 models load, and reload. Fixes #751


Mon, 10 Oct 2016 17:13:49 GMT richardh [5a22548]
	* sasmodels/sasview_model.py (modified)
	* sasmodels/models/multilayer_vesicle.py (modified)
	* sasmodels/models/vesicle.py (modified)

	Merge branch 'master' of https://github.com/sasview/sasmodels


Mon, 10 Oct 2016 17:13:44 GMT richardh [e77872e]
	* sasmodels/models/multilayer_vesicle.py (modified)
	* sasmodels/models/vesicle.py (modified)

	revised docs for multilayer_vesicle, fixed typo in docs for vesicle


Mon, 10 Oct 2016 16:56:09 GMT mathieu [2f2c70c]
	* sasmodels/sasview_model.py (modified)

	Fix problem with reloading. Re #673


Mon, 10 Oct 2016 16:36:59 GMT Paul Kienzle <pkienzle@…> [8f93522]
	* sasmodels/sasview_model.py (modified)

	hide structure factor background/scale from sasview gui.  Fixes #657.


Mon, 10 Oct 2016 15:17:15 GMT Paul Kienzle <pkienzle@…> [479d0f3]
	* sasmodels/model_test.py (modified)

	run_one() uses dll if OpenCL is not available.  Fixes #706.


Mon, 10 Oct 2016 13:30:02 GMT Paul Kienzle <pkienzle@…> [3c852d4]
	* sasmodels/custom/__init__.py (modified)
	* sasmodels/model_test.py (modified)

	use public api to access test suite (refs #706)


Sun, 09 Oct 2016 14:35:59 GMT mathieu [ed10b57]
	* sasmodels/sasview_model.py (modified)

	Allow loading of custom model of the same name as a std model (append ...


Sun, 09 Oct 2016 14:26:22 GMT smk78 [3f5a566]
	* doc/ref/gpu/gpu_computations.rst (modified)

	Tweak to text to keep Richard happy.


Sat, 08 Oct 2016 16:36:46 GMT richardh [59994557]
	* doc/ref/gpu/gpu_computations.rst (modified)
	* doc/ref/gpu/opencl_installation.rst (modified)
	* sasmodels/models/polymer_micelle.py (modified)
	* sasmodels/models/spinodal.py (modified)

	Merge branch 'master' of https://github.com/sasview/sasmodels


Sat, 08 Oct 2016 16:35:29 GMT richardh [bba9361]
	* sasmodels/models/polymer_micelle.py (modified)
	* sasmodels/models/spinodal.py (modified)

	expanded docu in polymer_micelle, docu bugs in spinodal fixed


Sat, 08 Oct 2016 15:47:03 GMT smk78 [ec8b9a3]
	* doc/ref/gpu/opencl_installation.rst (modified)

	Tweaks to text, including a warning about OpenCL drivers and a link
	to ...


Sat, 08 Oct 2016 15:44:56 GMT smk78 [711f17e]
	* doc/ref/gpu/gpu_computations.rst (modified)

	Tweaks to text. Operation of python shell device test verified. Refs ...


Sat, 08 Oct 2016 14:03:09 GMT smk78 [066f296]
	* doc/ref/gpu/gpu_computations.rst (modified)

	Changed anchor "models-complitation" to "models-computation"


Sat, 08 Oct 2016 02:48:08 GMT dirk [43fe34b]
	* sasmodels/models/broad_peak.py (modified)
	* sasmodels/models/spinodal.py (added)

	closed: #723


Sat, 08 Oct 2016 01:20:13 GMT butler [462a115]
	* sasmodels/generate.py (modified)

	update generate.py to fix units conversion to ReST in some models


Sat, 08 Oct 2016 01:07:26 GMT butler [5df888c]
	* sasmodels/models/be_polyelectrolyte.py (modified)

	added defintions, fixed units and gnerally cleaned up ...


Fri, 07 Oct 2016 19:51:36 GMT richardh [416f5c7]
	* sasmodels/models/core_shell_bicelle.py (modified)
	* sasmodels/models/core_shell_ellipsoid.py (modified)
	* sasmodels/models/cylinder.py (modified)
	* sasmodels/models/ellipsoid.py (modified)
	* sasmodels/models/img/core_shell_ellipsoid_geometry.png (modified)
	* sasmodels/models/parallelepiped.py (modified)
	* sasmodels/models/triaxial_ellipsoid.py (modified)

	fixes for numref warnings in docu, new equations core_shell_bicelle ...


Fri, 07 Oct 2016 17:17:17 GMT smk78 [8749c1c4]
	* doc/ref/sesans/SESANSinSASVIEW.pdf (added)

	Add SESANSinSASVIEW.pdf to sasmodels/doc/ref/sesans for good measure.


Fri, 07 Oct 2016 17:09:45 GMT smk78 [100a694]
	* sasmodels/models/ref/NIST_IGOR_SANS_Model_Docs_v4.10.pdf (added)

	Keep a reference copy of the IGOR model documentation.


Fri, 07 Oct 2016 15:55:39 GMT smk78 [a655e27]
	* doc/ref/sesans/sesans_fitting.rst (modified)

	Oops! Used \ instead of / in ..image::


Fri, 07 Oct 2016 15:29:17 GMT smk78 [c34a31f]
	* doc/ref/index.rst (modified)
	* doc/ref/sesans/sesans_fitting.rst (added)
	* doc/ref/sesans/sesans_img/HardSphereLineFitSasView.png (added)
	* doc/ref/sesans/sesans_img/SphereLineFitSasView.png (added)

	Added SESANS fitting instructions to sasmodels. Refs #720


Fri, 07 Oct 2016 15:24:06 GMT mathieu [2b3a1bd]
	* sasmodels/resolution.py (modified)

	Fix typo


Fri, 07 Oct 2016 13:47:36 GMT ajj [6ae7957]
	* doc/ref/gpu/gpu_computations.rst (moved)
	* doc/ref/gpu/opencl_installation.rst (moved)
	* doc/ref/index.rst (modified)

	Modifying doc arrangement to make sasview build work better.


Fri, 07 Oct 2016 01:27:44 GMT richardh [9272cbd]
	* sasmodels/models/core_shell_ellipsoid.py (modified)
	* sasmodels/models/img/core_shell_ellipsoid_geometry.png (modified)

	new figure and documentation edit for core_shell_ellipsoid


Thu, 06 Oct 2016 22:49:29 GMT dirk [b3f2a24]
	* sasmodels/models/teubner_strey.py (modified)
	* sasmodels/models/unified_power_Rg.py (modified)

	update help for Teubner-Stray model


Thu, 06 Oct 2016 22:12:24 GMT butler [adc753d]
	* sasmodels/models/core_shell_bicelle.py (modified)

	bicelle model documentation standardized, ref to original derivation
	and ...


Thu, 06 Oct 2016 21:59:19 GMT smk78 [a86b9f4]
	* doc/ref/sesans/sans_to_sesans.rst (modified)

	Added a tag so document can be referenced from elsewhere in the help.


Thu, 06 Oct 2016 21:25:20 GMT GitHub <noreply@…> [6abf703]
	* example/sesans_sphere_2micron.py (added)
	* example/spheres2micron.ses (added)

	Add files via upload

	Clear example of monodisperse dilute spheres ...


Thu, 06 Oct 2016 20:20:06 GMT wojciech [5b37fd6]
	* sasmodels/sasview_model.py (modified)

	Needed to try except clause, otherwise was failing when trying
	disatch ...