This module provide GUI for the neutron scattering length density calculator
Bases: wx._windows.Dialog
See GetAcceleratorTable and SetAcceleratorTable
AcceptsFocus(self) -> bool
Can this window have focus?
AcceptsFocusFromKeyboard(self) -> bool
Can this window be given focus by keyboard navigation? if not, the only way to give it focus (provided it accepts it at all) is to click it.
AddChild(self, Window child)
Adds a child window. This is called automatically by window creation functions so should not be required by the application programmer.
AddPendingEvent(self, Event event)
AdjustForLayoutDirection(self, int x, int width, int widthTotal) -> int
Mirror coordinates for RTL layout if this window uses it and if the mirroring is not done automatically like Win32.
See GetAffirmativeId and SetAffirmativeId
AssociateHandle(self, long handle)
Associate the window with a new native handle
See GetAutoLayout and SetAutoLayout
See GetBackgroundColour and SetBackgroundColour
See GetBackgroundStyle and SetBackgroundStyle
See GetBestSize
See GetBestVirtualSize
Bind an event to an event handler.
| Parameters: |
|
|---|
See GetBorder
CacheBestSize(self, Size size)
Cache the best size so it doesn’t need to be calculated again, (at least until some properties of the window change.)
CanSetTransparent(self) -> bool
Returns True if the platform supports setting the transparency for this window. Note that this method will err on the side of caution, so it is possible that this will return False when it is in fact possible to set the transparency.
NOTE: On X-windows systems the X server must have the composite extension loaded, and there must be a composite manager program (such as xcompmgr) running.
CaptureMouse(self)
Directs all mouse input to this window. Call wx.Window.ReleaseMouse to release the capture.
Note that wxWindows maintains the stack of windows having captured the mouse and when the mouse is released the capture returns to the window which had had captured it previously and it is only really released if there were no previous window. In particular, this means that you must release the mouse as many times as you capture it, unless the window receives the wx.MouseCaptureLostEvent event.
Any application which captures the mouse in the beginning of some operation must handle wx.MouseCaptureLostEvent and cancel this operation when it receives the event. The event handler must not recapture mouse.
See GetCaret and SetCaret
Center(self, int direction=BOTH)
Centers the window. The parameter specifies the direction for centering, and may be wx.HORIZONTAL, wx.VERTICAL or wx.BOTH. It may also include wx.CENTER_ON_SCREEN flag if you want to center the window on the entire screen and not on its parent window. If it is a top-level window and has no parent then it will always be centered relative to the screen.
CenterOnParent(self, int dir=BOTH)
Center with respect to the the parent window
CenterOnScreen(self, int dir=BOTH)
Center the window on screen
Center(self, int direction=BOTH)
Centers the window. The parameter specifies the direction for centering, and may be wx.HORIZONTAL, wx.VERTICAL or wx.BOTH. It may also include wx.CENTER_ON_SCREEN flag if you want to center the window on the entire screen and not on its parent window. If it is a top-level window and has no parent then it will always be centered relative to the screen.
CenterOnParent(self, int dir=BOTH)
Center with respect to the the parent window
CenterOnScreen(self, int dir=BOTH)
Center the window on screen
See GetCharHeight
See GetCharWidth
See GetChildren
See GetClassName
ClearBackground(self)
Clears the window by filling it with the current background colour. Does not cause an erase background event to be generated.
See GetClientAreaOrigin
See GetClientRect and SetClientRect
See GetClientSize and SetClientSize
ClientToScreen(self, Point pt) -> Point
Converts to screen coordinates from coordinates relative to this window.
ClientToScreenXY(int x, int y) -> (x,y)
Converts to screen coordinates from coordinates relative to this window.
ClientToWindowSize(self, Size size) -> Size
Close(self, bool force=False) -> bool
This function simply generates a EVT_CLOSE event whose handler usually tries to close the window. It doesn’t close the window itself, however. If force is False (the default) then the window’s close handler will be allowed to veto the destruction of the window.
Connect(self, int id, int lastId, int eventType, PyObject func)
See GetConstraints and SetConstraints
See GetContainingSizer and SetContainingSizer
ConvertDialogPointToPixels(self, Point pt) -> Point
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
ConvertDialogSizeToPixels(self, Size sz) -> Size
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
ConvertPixelPointToDialog(self, Point pt) -> Point
ConvertPixelSizeToDialog(self, Size sz) -> Size
CreateSeparatedButtonSizer(self, long flags) -> Sizer
CreateStdDialogButtonSizer(self, long flags) -> StdDialogButtonSizer
CreateTextSizer(self, String message) -> Sizer
See GetCursor and SetCursor
DLG_PNT(self, Point pt) -> Point
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
DLG_SZE(self, Size sz) -> Size
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
See GetDefaultAttributes
See GetDefaultItem and SetDefaultItem
Destroy(self) -> bool
Destroys the window safely. Frames and dialogs are not destroyed immediately when this function is called – they are added to a list of windows to be deleted on idle time, when all the window’s events have been processed. This prevents problems with events being sent to non-existent windows.
Returns True if the window has either been successfully deleted, or it has been added to the list of windows pending real deletion.
DestroyChildren(self) -> bool
Destroys all children of a window. Called automatically by the destructor.
Disable(self) -> bool
Disables the window, same as Enable(false).
DissociateHandle(self)
Dissociate the current native handle from the window
DragAcceptFiles(self, bool accept)
Enables or disables eligibility for drop file events, EVT_DROP_FILES.
See GetDropTarget and SetDropTarget
See GetEffectiveMinSize
Enable(self, bool enable=True) -> bool
Enable or disable the window for user input. Note that when a parent window is disabled, all of its children are disabled as well and they are reenabled again when the parent is. Returns true if the window has been enabled or disabled, false if nothing was done, i.e. if the window had already been in the specified state.
EnableCloseButton(self, bool enable) -> bool
See IsEnabled and Enable
EndModal(self, int retCode)
See GetEscapeId and SetEscapeId
See GetEventHandler and SetEventHandler
See GetEvtHandlerEnabled and SetEvtHandlerEnabled
See GetExtraStyle and SetExtraStyle
FindFocus() -> Window
Returns the window or control that currently has the keyboard focus, or None.
FindWindowById(self, long winid) -> Window
Find a child of this window by window ID
FindWindowByLabel(self, String label) -> Window
Find a child of this window by label
FindWindowByName(self, String name) -> Window
Find a child of this window by name
Fit(self)
Sizes the window so that it fits around its subwindows. This function won’t do anything if there are no subwindows and will only really work correctly if sizers are used for the subwindows layout. Also, if the window has exactly one subwindow it is better (faster and the result is more precise as Fit adds some margin to account for fuzziness of its calculations) to call window.SetClientSize(child.GetSize()) instead of calling Fit.
FitInside(self)
Similar to Fit, but sizes the interior (virtual) size of a window. Mainly useful with scrolled windows to reset scrollbars after sizing changes that do not trigger a size event, and/or scrolled windows without an interior sizer. This function similarly won’t do anything if there are no subwindows.
See GetFont and SetFont
See GetForegroundColour and SetForegroundColour
Freeze(self)
Freezes the window or, in other words, prevents any updates from taking place on screen, the window is not redrawn at all. Thaw must be called to reenable window redrawing. Calls to Freeze/Thaw may be nested, with the actual Thaw being delayed until all the nesting has been undone.
This method is useful for visual appearance optimization (for example, it is a good idea to use it before inserting large amount of text into a wxTextCtrl under wxGTK) but is not implemented on all platforms nor for all controls so it is mostly just a hint to wxWindows and not a mandatory directive.
GetAcceleratorTable(self) -> AcceleratorTable
Gets the accelerator table for this window.
Use GetEffectiveMinSize instead.
GetAffirmativeId(self) -> int
GetAutoLayout(self) -> bool
Returns the current autoLayout setting
GetBackgroundColour(self) -> Colour
Returns the background colour of the window.
GetBackgroundStyle(self) -> int
Returns the background style of the window.
| See : | SetBackgroundStyle |
|---|
Use GetEffectiveMinSize instead.
GetBestSize(self) -> Size
This function returns the best acceptable minimal size for the window, if applicable. For example, for a static text control, it will be the minimal size such that the control label is not truncated. For windows containing subwindows (such as wx.Panel), the size returned by this function will be the same as the size the window would have had after calling Fit.
GetBestSizeTuple() -> (width, height)
This function returns the best acceptable minimal size for the window, if applicable. For example, for a static text control, it will be the minimal size such that the control label is not truncated. For windows containing subwindows (such as wx.Panel), the size returned by this function will be the same as the size the window would have had after calling Fit.
GetBestVirtualSize(self) -> Size
Return the largest of ClientSize and BestSize (as determined by a sizer, interior children, or other means)
GetBorder(self, long flags) -> int GetBorder(self) -> int
Get border for the flags of this window
GetCapture() -> Window
Returns the window which currently captures the mouse or None
GetCaret(self) -> Caret
Returns the caret associated with the window.
GetCharHeight(self) -> int
Get the (average) character size for the current font.
GetCharWidth(self) -> int
Get the (average) character size for the current font.
GetChildren(self) -> WindowList
Returns an object containing a list of the window’s children. The object provides a Python sequence-like interface over the internal list maintained by the window..
GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
Get the default attributes for this class. This is useful if you want to use the same font or colour in your own control as in a standard control – which is a much better idea than hard coding specific colours or fonts which might look completely out of place on the user’s system, especially if it uses themes.
The variant parameter is only relevant under Mac currently and is ignore under other platforms. Under Mac, it will change the size of the returned font. See wx.Window.SetWindowVariant for more about this.
GetClassName(self) -> String
Returns the class name of the C++ class using wxRTTI.
GetClientAreaOrigin(self) -> Point
Get the origin of the client area of the window relative to the window’s top left corner (the client area may be shifted because of the borders, scrollbars, other decorations...)
GetClientRect(self) -> Rect
Get the client area position and size as a wx.Rect object.
GetClientSize(self) -> Size
This gets the size of the window’s ‘client area’ in pixels. The client area is the area which may be drawn on by the programmer, excluding title bar, border, scrollbars, etc.
GetClientSizeTuple() -> (width, height)
This gets the size of the window’s ‘client area’ in pixels. The client area is the area which may be drawn on by the programmer, excluding title bar, border, scrollbars, etc.
GetConstraints(self) -> LayoutConstraints
Returns a pointer to the window’s layout constraints, or None if there are none.
GetContainingSizer(self) -> Sizer
Return the sizer that this window is a member of, if any, otherwise None.
GetCursor(self) -> Cursor
Return the cursor associated with this window.
GetDefaultAttributes(self) -> VisualAttributes
Get the default attributes for an instance of this class. This is useful if you want to use the same font or colour in your own control as in a standard control – which is a much better idea than hard coding specific colours or fonts which might look completely out of place on the user’s system, especially if it uses themes.
GetDefaultItem(self) -> Window
Get the default child of this parent, i.e. the one which is activated by pressing <Enter> such as the OK button on a wx.Dialog.
GetDropTarget(self) -> DropTarget
Returns the associated drop target, which may be None.
GetEffectiveMinSize(self) -> Size
This function will merge the window’s best size into the window’s minimum size, giving priority to the min size components, and returns the results.
GetEscapeId(self) -> int
GetEventHandler(self) -> EvtHandler
Returns the event handler for this window. By default, the window is its own event handler.
GetEvtHandlerEnabled(self) -> bool
GetExtraStyle(self) -> long
Returns the extra style bits for the window.
GetFont(self) -> Font
Returns the default font used for this window.
GetForegroundColour(self) -> Colour
Returns the foreground colour of the window. The interpretation of foreground colour is dependent on the window class; it may be the text colour or other colour, or it may not be used at all.
Get the width, height, decent and leading of the text using the current or specified font.
GetGrandParent(self) -> Window
Returns the parent of the parent of this window, or None if there isn’t one.
GetGtkWidget(self) -> long
On wxGTK returns a pointer to the GtkWidget for this window as a long integer. On the other platforms this method returns zero.
GetHandle(self) -> long
Returns the platform-specific handle (as a long integer) of the physical window. On wxMSW this is the win32 window handle, on wxGTK it is the XWindow ID, and on wxMac it is the ControlRef.
GetHelpText(self) -> String
Gets the help text to be used as context-sensitive help for this window. Note that the text is actually stored by the current wx.HelpProvider implementation, and not in the window object itself.
GetHelpTextAtPoint(self, Point pt, wxHelpEvent::Origin origin) -> String
Get the help string associated with the given position in this window.
Notice that pt may be invalid if event origin is keyboard or unknown and this method should return the global window help text then
GetIcon(self) -> Icon
GetId(self) -> int
Returns the identifier of the window. Each window has an integer identifier. If the application has not provided one (or the default Id -1 is used) then an unique identifier with a negative value will be generated.
GetLabel(self) -> String
Generic way of getting a label from any window, for identification purposes. The interpretation of this function differs from class to class. For frames and dialogs, the value returned is the title. For buttons or static text controls, it is the button text. This function can be useful for meta-programs such as testing tools or special-needs access programs)which need to identify windows by name.
GetLayoutDirection(self) -> int
Get the layout direction (LTR or RTL) for this window. Returns wx.Layout_Default if layout direction is not supported.
GetMaxHeight(self) -> int
GetMaxSize(self) -> Size
GetMaxWidth(self) -> int
GetMinHeight(self) -> int
GetMinSize(self) -> Size
GetMinWidth(self) -> int
GetName(self) -> String
Returns the windows name. This name is not guaranteed to be unique; it is up to the programmer to supply an appropriate name in the window constructor or via wx.Window.SetName.
GetNextHandler(self) -> EvtHandler
GetParent(self) -> Window
Returns the parent window of this window, or None if there isn’t one.
GetPosition(self) -> Point
Get the window’s position. Notice that the position is in client coordinates for child windows and screen coordinates for the top level ones, use GetScreenPosition if you need screen coordinates for all kinds of windows.
GetPositionTuple() -> (x,y)
Get the window’s position. Notice that the position is in client coordinates for child windows and screen coordinates for the top level ones, use GetScreenPosition if you need screen coordinates for all kinds of windows.
GetPreviousHandler(self) -> EvtHandler
GetRect(self) -> Rect
Returns the size and position of the window as a wx.Rect object.
GetReturnCode(self) -> int
GetScreenPosition(self) -> Point
Get the position of the window in screen coordinantes.
GetScreenPositionTuple() -> (x,y)
Get the position of the window in screen coordinantes.
GetScreenRect(self) -> Rect
Returns the size and position of the window in screen coordinantes as a wx.Rect object.
GetScrollPos(self, int orientation) -> int
Returns the built-in scrollbar position.
GetScrollRange(self, int orientation) -> int
Returns the built-in scrollbar range.
GetScrollThumb(self, int orientation) -> int
Returns the built-in scrollbar thumb size.
GetSize(self) -> Size
Get the window size.
GetSizeTuple() -> (width, height)
Get the window size.
GetSizer(self) -> Sizer
Return the sizer associated with the window by a previous call to SetSizer or None if there isn’t one.
GetTextExtent(String string) -> (width, height)
Get the width and height of the text using the current font.
GetThemeEnabled(self) -> bool
Return the themeEnabled flag.
GetTitle(self) -> String
GetTmpDefaultItem(self) -> Window
Return the temporary default item, which can be None.
GetToolTip(self) -> ToolTip
get the associated tooltip or None if none
GetTopLevelParent(self) -> Window
Returns the first frame or dialog in this window’s parental hierarchy.
GetUpdateClientRect(self) -> Rect
Get the update rectangle region bounding box in client coords.
GetUpdateRegion(self) -> Region
Returns the region specifying which parts of the window have been damaged. Should only be called within an EVT_PAINT handler.
GetValidator(self) -> Validator
Returns a pointer to the current validator for the window, or None if there is none.
GetVirtualSize(self) -> Size
Get the the virtual size of the window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
GetVirtualSizeTuple() -> (width, height)
Get the the virtual size of the window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
GetWindowBorderSize(self) -> Size
Return the size of the left/right and top/bottom borders.
GetWindowStyleFlag(self) -> long
Gets the window style that was passed to the constructor or Create method.
GetWindowStyleFlag(self) -> long
Gets the window style that was passed to the constructor or Create method.
GetWindowVariant(self) -> int
See GetGrandParent
GetGtkWidget(self) -> long
On wxGTK returns a pointer to the GtkWidget for this window as a long integer. On the other platforms this method returns zero.
See GetHandle
HasCapture(self) -> bool
Returns true if this window has the current mouse capture.
HasFlag(self, int flag) -> bool
Test if the given style is set for this window.
HasMultiplePages(self) -> bool
HasScrollbar(self, int orient) -> bool
Does the window have the scrollbar for this orientation?
HasTransparentBackground(self) -> bool
Returns True if this window’s background is transparent (as, for example, for wx.StaticText) and should show the parent window’s background.
This method is mostly used internally by the library itself and you normally shouldn’t have to call it. You may, however, have to override it in your custom control classes to ensure that background is painted correctly.
See GetHelpText and SetHelpText
Hide(self) -> bool
Equivalent to calling Show(False).
HitTest(self, Point pt) -> int
Test where the given (in client coords) point lies
HitTestXY(self, int x, int y) -> int
Test where the given (in client coords) point lies
See GetIcon and SetIcon
Iconize(self, bool iconize=True)
See GetId and SetId
InheritAttributes(self)
This function is (or should be, in case of custom controls) called during window creation to intelligently set up the window visual attributes, that is the font and the foreground and background colours.
By ‘intelligently’ the following is meant: by default, all windows use their own default attributes. However if some of the parent’s attributes are explicitly changed (that is, using SetFont and not SetOwnFont) and if the corresponding attribute hadn’t been explicitly set for this window itself, then this window takes the same value as used by the parent. In addition, if the window overrides ShouldInheritColours to return false, the colours will not be changed no matter what and only the font might.
This rather complicated logic is necessary in order to accommodate the different usage scenarios. The most common one is when all default attributes are used and in this case, nothing should be inherited as in modern GUIs different controls use different fonts (and colours) than their siblings so they can’t inherit the same value from the parent. However it was also deemed desirable to allow to simply change the attributes of all children at once by just changing the font or colour of their common parent, hence in this case we do inherit the parents attributes.
InheritsBackgroundColour(self) -> bool
InitDialog(self)
Sends an EVT_INIT_DIALOG event, whose handler usually transfers data to the dialog via validators.
InvalidateBestSize(self)
Reset the cached best size value so it will be recalculated the next time it is needed.
IsActive(self) -> bool
IsAlwaysMaximized(self) -> bool
IsBeingDeleted(self) -> bool
Is the window in the process of being deleted?
IsDoubleBuffered(self) -> bool
Returns True if the window contents is double-buffered by the system, i.e. if any drawing done on the window is really done on a temporary backing surface and transferred to the screen all at once later.
IsEnabled(self) -> bool
Returns true if the window is enabled for input, false otherwise.
IsExposed(self, int x, int y, int w=1, int h=1) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsExposedPoint(self, Point pt) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsExposedRect(self, Rect rect) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsFrozen(self) -> bool
Returns True if the window has been frozen and not thawed yet.
| See : | Freeze and Thaw |
|---|
IsFullScreen(self) -> bool
IsIconized(self) -> bool
IsMaximized(self) -> bool
IsModal(self) -> bool
IsRetained(self) -> bool
Returns true if the window is retained, false otherwise. Retained windows are only available on X platforms.
IsSameAs(self, Object p) -> bool
For wx.Objects that use C++ reference counting internally, this method can be used to determine if two objects are referencing the same data object.
IsShown(self) -> bool
Returns true if the window is shown, false if it has been hidden.
IsShownOnScreen(self) -> bool
Returns True if the window is physically visible on the screen, i.e. it is shown and all its parents up to the toplevel window are shown as well.
IsTopLevel(self) -> bool
Returns true if the given window is a top-level one. Currently all frames and dialogs are always considered to be top-level windows (even if they have a parent window).
See GetLabel and SetLabel
Layout(self) -> bool
Invokes the constraint-based layout algorithm or the sizer-based algorithm for this window. See SetAutoLayout: when auto layout is on, this function gets called automatically by the default EVT_SIZE handler when the window is resized.
See GetLayoutDirection and SetLayoutDirection
LineDown(self) -> bool
This is just a wrapper for ScrollLines(1).
LineUp(self) -> bool
This is just a wrapper for ScrollLines(-1).
Lower(self)
Lowers the window to the bottom of the window hierarchy. In current version of wxWidgets this works both for managed and child windows.
MacGetMetalAppearance(self) -> bool
MacGetTopLevelWindowRef(self) -> long
MacGetUnifiedAppearance(self) -> bool
MacSetMetalAppearance(self, bool on)
MakeModal(self, bool modal=True)
Disables all other windows in the application so that the user can only interact with this window. Passing False will reverse this effect.
See GetMaxHeight
See GetMaxSize and SetMaxSize
See GetMaxWidth
Maximize(self, bool maximize=True)
See GetMinHeight
See GetMinSize and SetMinSize
See GetMinWidth
Move(self, Point pt, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
MoveAfterInTabOrder(self, Window win)
Moves this window in the tab navigation order after the specified sibling window. This means that when the user presses the TAB key on that other window, the focus switches to this window.
The default tab order is the same as creation order. This function and MoveBeforeInTabOrder allow to change it after creating all the windows.
MoveBeforeInTabOrder(self, Window win)
Same as MoveAfterInTabOrder except that it inserts this window just before win instead of putting it right after it.
MoveXY(self, int x, int y, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
See GetName and SetName
Navigate(self, int flags=NavigationKeyEvent.IsForward) -> bool
Does keyboard navigation from this window to another, by sending a wx.NavigationKeyEvent.
NewControlId() -> int
Generate a control id for the controls which were not given one.
NextControlId(int winid) -> int
Get the id of the control following the one with the given autogenerated) id
See GetNextHandler and SetNextHandler
OnPaint(self, PaintEvent event)
PageDown(self) -> bool
This is just a wrapper for ScrollPages(1).
PageUp(self) -> bool
This is just a wrapper for ScrollPages(-1).
See GetParent
PopEventHandler(self, bool deleteHandler=False) -> EvtHandler
Removes and returns the top-most event handler on the event handler stack. If deleteHandler is True then the wx.EvtHandler object will be destroyed after it is popped, and None will be returned instead.
PopupMenu(self, Menu menu, Point pos=DefaultPosition) -> bool
Pops up the given menu at the specified coordinates, relative to this window, and returns control when the user has dismissed the menu. If a menu item is selected, the corresponding menu event is generated and will be processed as usual. If the default position is given then the current position of the mouse cursor will be used.
PopupMenuXY(self, Menu menu, int x=-1, int y=-1) -> bool
Pops up the given menu at the specified coordinates, relative to this window, and returns control when the user has dismissed the menu. If a menu item is selected, the corresponding menu event is generated and will be processed as usual. If the default position is given then the current position of the mouse cursor will be used.
See GetPosition and SetPosition
Phase 3 of the 2-phase create <wink!> Call this method after precreating the window with the 2-phase create method.
PrepareDC(self, DC dc)
Call this function to prepare the device context for drawing a scrolled image. It sets the device origin according to the current scroll position.
PrevControlId(int winid) -> int
Get the id of the control preceding the one with the given autogenerated) id
See GetPreviousHandler and SetPreviousHandler
ProcessEvent(self, Event event) -> bool
ProcessPendingEvents(self)
PushEventHandler(self, EvtHandler handler)
Pushes this event handler onto the event handler stack for the window. An event handler is an object that is capable of processing the events sent to a window. (In other words, is able to dispatch the events to a handler function.) By default, the window is its own event handler, but an application may wish to substitute another, for example to allow central implementation of event-handling for a variety of different window classes.
wx.Window.PushEventHandler allows an application to set up a chain of event handlers, where an event not handled by one event handler is handed to the next one in the chain. Use wx.Window.PopEventHandler to remove the event handler. Ownership of the handler is not given to the window, so you should be sure to pop the handler before the window is destroyed and either let PopEventHandler destroy it, or call its Destroy method yourself.
Raise(self)
Raises the window to the top of the window hierarchy. In current version of wxWidgets this works both for managed and child windows.
See GetRect and SetRect
Refresh(self, bool eraseBackground=True, Rect rect=None)
Mark the specified rectangle (or the whole window) as “dirty” so it will be repainted. Causes an EVT_PAINT event to be generated and sent to the window.
RefreshRect(self, Rect rect, bool eraseBackground=True)
Redraws the contents of the given rectangle: the area inside it will be repainted. This is the same as Refresh but has a nicer syntax.
RegisterHotKey(self, int hotkeyId, int modifiers, int keycode) -> bool
Registers a system wide hotkey. Every time the user presses the hotkey registered here, this window will receive a hotkey event. It will receive the event even if the application is in the background and does not have the input focus because the user is working with some other application. To bind an event handler function to this hotkey use EVT_HOTKEY with an id equal to hotkeyId. Returns True if the hotkey was registered successfully.
ReleaseMouse(self)
Releases mouse input captured with wx.Window.CaptureMouse.
RemoveChild(self, Window child)
Removes a child window. This is called automatically by window deletion functions so should not be required by the application programmer.
RemoveEventHandler(self, EvtHandler handler) -> bool
Find the given handler in the event handler chain and remove (but not delete) it from the event handler chain, returns True if it was found and False otherwise (this also results in an assert failure so this function should only be called when the handler is supposed to be there.)
Reparent(self, Window newParent) -> bool
Reparents the window, i.e the window will be removed from its current parent window (e.g. a non-standard toolbar in a wxFrame) and then re-inserted into another. Available on Windows and GTK. Returns True if the parent was changed, False otherwise (error or newParent == oldParent)
RequestUserAttention(self, int flags=USER_ATTENTION_INFO)
Restore(self)
See GetReturnCode and SetReturnCode
See GetScreenPosition
See GetScreenRect
ScreenToClient(self, Point pt) -> Point
Converts from screen to client window coordinates.
ScreenToClientXY(int x, int y) -> (x,y)
Converts from screen to client window coordinates.
ScrollLines(self, int lines) -> bool
If the platform and window class supports it, scrolls the window by the given number of lines down, if lines is positive, or up if lines is negative. Returns True if the window was scrolled, False if it was already on top/bottom and nothing was done.
ScrollPages(self, int pages) -> bool
If the platform and window class supports it, scrolls the window by the given number of pages down, if pages is positive, or up if pages is negative. Returns True if the window was scrolled, False if it was already on top/bottom and nothing was done.
ScrollWindow(self, int dx, int dy, Rect rect=None)
Physically scrolls the pixels in the window and move child windows accordingly. Use this function to optimise your scrolling implementations, to minimise the area that must be redrawn. Note that it is rarely required to call this function from a user program.
SetAcceleratorTable(self, AcceleratorTable accel)
Sets the accelerator table for this window.
SetAffirmativeId(self, int affirmativeId)
SetAutoLayout(self, bool autoLayout)
Determines whether the Layout function will be called automatically when the window is resized. lease note that this only happens for the windows usually used to contain children, namely wx.Panel and wx.TopLevelWindow (and the classes deriving from them).
This method is called implicitly by SetSizer but if you use SetConstraints you should call it manually or otherwise the window layout won’t be correctly updated when its size changes.
SetBackgroundColour(self, Colour colour) -> bool
Sets the background colour of the window. Returns True if the colour was changed. The background colour is usually painted by the default EVT_ERASE_BACKGROUND event handler function under Windows and automatically under GTK. Using wx.NullColour will reset the window to the default background colour.
Note that setting the background colour may not cause an immediate refresh, so you may wish to call ClearBackground or Refresh after calling this function.
Using this function will disable attempts to use themes for this window, if the system supports them. Use with care since usually the themes represent the appearance chosen by the user to be used for all applications on the system.
SetBackgroundStyle(self, int style) -> bool
Returns the background style of the window. The background style indicates how the background of the window is drawn.
wx.BG_STYLE_SYSTEM The background colour or pattern should be determined by the system wx.BG_STYLE_COLOUR The background should be a solid colour wx.BG_STYLE_CUSTOM The background will be implemented by the application.
On GTK+, use of wx.BG_STYLE_CUSTOM allows the flicker-free drawing of a custom background, such as a tiled bitmap. Currently the style has no effect on other platforms.
| See : | GetBackgroundStyle, SetBackgroundColour |
|---|
Use SetInitialSize
SetCaret(self, Caret caret)
Sets the caret associated with the window.
SetClientRect(self, Rect rect)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetClientSize(self, Size size)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetClientSizeWH(self, int width, int height)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetConstraints(self, LayoutConstraints constraints)
Sets the window to have the given layout constraints. If an existing layout constraints object is already owned by the window, it will be deleted. Pass None to disassociate and delete the window’s current constraints.
You must call SetAutoLayout to tell a window to use the constraints automatically in its default EVT_SIZE handler; otherwise, you must handle EVT_SIZE yourself and call Layout() explicitly. When setting both a wx.LayoutConstraints and a wx.Sizer, only the sizer will have effect.
SetContainingSizer(self, Sizer sizer)
This normally does not need to be called by application code. It is called internally when a window is added to a sizer, and is used so the window can remove itself from the sizer when it is destroyed.
SetCursor(self, Cursor cursor) -> bool
Sets the window’s cursor. Notice that the window cursor also sets it for the children of the window implicitly.
The cursor may be wx.NullCursor in which case the window cursor will be reset back to default.
SetDefaultItem(self, Window child) -> Window
Set this child as default, return the old default.
SetDimensions(self, int x, int y, int width, int height, int sizeFlags=SIZE_AUTO)
Sets the position and size of the window in pixels. The sizeFlags parameter indicates the interpretation of the other params if they are equal to -1.
wx.SIZE_AUTO A -1 indicates that a class-specific default should be used. wx.SIZE_USE_EXISTING Existing dimensions should be used if -1 values are supplied. wxSIZE_ALLOW_MINUS_ONE Allow dimensions of -1 and less to be interpreted as real dimensions, not default values.
SetDoubleBuffered(self, bool on)
Put the native window into double buffered or composited mode.
SetDropTarget(self, DropTarget dropTarget)
Associates a drop target with this window. If the window already has a drop target, it is deleted.
SetEscapeId(self, int escapeId)
SetEventHandler(self, EvtHandler handler)
Sets the event handler for this window. An event handler is an object that is capable of processing the events sent to a window. (In other words, is able to dispatch the events to handler function.) By default, the window is its own event handler, but an application may wish to substitute another, for example to allow central implementation of event-handling for a variety of different window classes.
It is usually better to use wx.Window.PushEventHandler since this sets up a chain of event handlers, where an event not handled by one event handler is handed off to the next one in the chain.
SetEvtHandlerEnabled(self, bool enabled)
SetExtraStyle(self, long exStyle)
Sets the extra style bits for the window. Extra styles are the less often used style bits which can’t be set with the constructor or with SetWindowStyleFlag()
SetFocus(self)
Set’s the focus to this window, allowing it to receive keyboard input.
SetFocusFromKbd(self)
Set focus to this window as the result of a keyboard action. Normally only called internally.
SetFont(self, Font font) -> bool
Sets the font for this window.
SetForegroundColour(self, Colour colour) -> bool
Sets the foreground colour of the window. Returns True is the colour was changed. The interpretation of foreground colour is dependent on the window class; it may be the text colour or other colour, or it may not be used at all.
SetHelpText(self, String text)
Sets the help text to be used as context-sensitive help for this window. Note that the text is actually stored by the current wx.HelpProvider implementation, and not in the window object itself.
SetHelpTextForId(self, String text)
Associate this help text with all windows with the same id as this one.
SetIcon(self, Icon icon)
SetIcons(self, wxIconBundle icons)
SetId(self, int winid)
Sets the identifier of the window. Each window has an integer identifier. If the application has not provided one, an identifier will be generated. Normally, the identifier should be provided on creation and should not be modified subsequently.
SetInitialSize(self, Size size=DefaultSize)
A ‘Smart’ SetSize that will fill in default size components with the window’s best size values. Also set’s the minsize for use with sizers.
SetLabel(self, String label)
Set the text which the window shows in its label if applicable.
SetLayoutDirection(self, int dir)
Set the layout direction (LTR or RTL) for this window.
SetMaxSize(self, Size maxSize)
A more convenient method than SetSizeHints for setting just the max size.
SetMinSize(self, Size minSize)
A more convenient method than SetSizeHints for setting just the min size.
SetName(self, String name)
Sets the window’s name. The window name is used for ressource setting in X, it is not the same as the window title/label
SetNextHandler(self, EvtHandler handler)
SetOwnBackgroundColour(self, Colour colour)
SetOwnFont(self, Font font)
SetOwnForegroundColour(self, Colour colour)
Move(self, Point pt, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
SetPreviousHandler(self, EvtHandler handler)
SetRect(self, Rect rect, int sizeFlags=SIZE_AUTO)
Sets the position and size of the window in pixels using a wx.Rect.
SetReturnCode(self, int returnCode)
SetScrollPos(self, int orientation, int pos, bool refresh=True)
Sets the position of one of the built-in scrollbars.
Sets the scrollbar properties of a built-in scrollbar.
SetShape(self, Region region) -> bool
SetSize(self, Size size)
Sets the size of the window in pixels.
Allows specification of minimum and maximum window sizes, and window size increments. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the window outside the given bounds (if it is a top-level window.) Sizers will also inspect the minimum window size and will use that value if set when calculating layout.
The resizing increments are only significant under Motif or Xt.
SetSizeHintsSz(self, Size minSize, Size maxSize=DefaultSize, Size incSize=DefaultSize)
Allows specification of minimum and maximum window sizes, and window size increments. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the window outside the given bounds (if it is a top-level window.) Sizers will also inspect the minimum window size and will use that value if set when calculating layout.
The resizing increments are only significant under Motif or Xt.
SetSizeWH(self, int width, int height)
Sets the size of the window in pixels.
SetSizer(self, Sizer sizer, bool deleteOld=True)
Sets the window to have the given layout sizer. The window will then own the object, and will take care of its deletion. If an existing layout sizer object is already owned by the window, it will be deleted if the deleteOld parameter is true. Note that this function will also call SetAutoLayout implicitly with a True parameter if the sizer is non-None, and False otherwise.
SetSizerAndFit(self, Sizer sizer, bool deleteOld=True)
The same as SetSizer, except it also sets the size hints for the window based on the sizer’s minimum size.
SetThemeEnabled(self, bool enableTheme)
Dialogs, notebook pages and the status bar have this flag set to true by default so that the default look and feel is simulated best.
SetTitle(self, String title)
SetTmpDefaultItem(self, Window win)
Set this child as temporary default
SetToolTip(self, ToolTip tip)
Attach a tooltip to the window.
SetToolTipString(self, String tip)
Attach a tooltip to the window.
SetTransparent(self, byte alpha) -> bool
Attempt to set the transparency of this window to the alpha value, returns True on success. The alpha value is an integer in the range of 0 to 255, where 0 is fully transparent and 255 is fully opaque.
SetValidator(self, Validator validator)
Deletes the current validator (if any) and sets the window validator, having called wx.Validator.Clone to create a new validator of this type.
SetVirtualSize(self, Size size)
Set the the virtual size of a window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
SetVirtualSizeHints(self, int minW, int minH, int maxW=-1, int maxH=-1)
Allows specification of minimum and maximum virtual window sizes. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the virtual area of the window outside the given bounds.
SetVirtualSizeHintsSz(self, Size minSize, Size maxSize=DefaultSize)
Allows specification of minimum and maximum virtual window sizes. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the virtual area of the window outside the given bounds.
SetVirtualSizeWH(self, int w, int h)
Set the the virtual size of a window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
SetWindowStyleFlag(self, long style)
Sets the style of the window. Please note that some styles cannot be changed after the window creation and that Refresh() might need to be called after changing the others for the change to take place immediately.
SetWindowStyleFlag(self, long style)
Sets the style of the window. Please note that some styles cannot be changed after the window creation and that Refresh() might need to be called after changing the others for the change to take place immediately.
SetWindowVariant(self, int variant)
Sets the variant of the window/font size to use for this window, if the platform supports variants, for example, wxMac.
ShouldInheritColours(self) -> bool
Return true from here to allow the colours of this window to be changed by InheritAttributes, returning false forbids inheriting them from the parent window.
The base class version returns false, but this method is overridden in wxControl where it returns true.
Show(self, bool show=True) -> bool
Shows or hides the window. You may need to call Raise for a top level window if you want to bring it to top, although this is not needed if Show is called immediately after the frame creation. Returns True if the window has been shown or hidden or False if nothing was done because it already was in the requested state.
ShowFullScreen(self, bool show, long style=FULLSCREEN_ALL) -> bool
ShowModal(self) -> int
See IsShown and Show
See GetSize and SetSize
See GetSizer and SetSizer
Thaw(self)
Reenables window updating after a previous call to Freeze. Calls to Freeze/Thaw may be nested, so Thaw must be called the same number of times that Freeze was before the window will be updated.
See GetThemeEnabled and SetThemeEnabled
See GetTitle and SetTitle
See GetTmpDefaultItem and SetTmpDefaultItem
ToggleWindowStyle(self, int flag) -> bool
Turn the flag on if it had been turned off before and vice versa, returns True if the flag is turned on by this function call.
See GetToolTip and SetToolTip
See IsTopLevel
See GetTopLevelParent
TransferDataFromWindow(self) -> bool
Transfers values from child controls to data areas specified by their validators. Returns false if a transfer failed. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call TransferDataFromWindow() of all child windows.
TransferDataToWindow(self) -> bool
Transfers values to child controls from data areas specified by their validators. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call TransferDataToWindow() of all child windows.
Disconnects the event handler binding for event from self. Returns True if successful.
UnregisterHotKey(self, int hotkeyId) -> bool
Unregisters a system wide hotkey.
Update(self)
Calling this method immediately repaints the invalidated area of the window instead of waiting for the EVT_PAINT event to happen, (normally this would usually only happen when the flow of control returns to the event loop.) Notice that this function doesn’t refresh the window and does nothing if the window has been already repainted. Use Refresh first if you want to immediately redraw the window (or some portion of it) unconditionally.
See GetUpdateClientRect
See GetUpdateRegion
UpdateWindowUI(self, long flags=UPDATE_UI_NONE)
This function sends EVT_UPDATE_UI events to the window. The particular implementation depends on the window; for example a wx.ToolBar will send an update UI event for each toolbar button, and a wx.Frame will send an update UI event for each menubar menu item. You can call this function from your application to ensure that your UI is up-to-date at a particular point in time (as far as your EVT_UPDATE_UI handlers are concerned). This may be necessary if you have called wx.UpdateUIEvent.SetMode or wx.UpdateUIEvent.SetUpdateInterval to limit the overhead that wxWindows incurs by sending update UI events in idle time.
UseBgCol(self) -> bool
Validate(self) -> bool
Validates the current values of the child controls using their validators. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call Validate() of all child windows. Returns false if any of the validations failed.
See GetValidator and SetValidator
See GetVirtualSize and SetVirtualSize
WarpPointer(self, int x, int y)
Moves the pointer to the given position on the window.
NOTE: This function is not supported under Mac because Apple Human Interface Guidelines forbid moving the mouse cursor programmatically.
See GetWindowStyle and SetWindowStyle
See GetWindowStyleFlag and SetWindowStyleFlag
WindowToClientSize(self, Size size) -> Size
See GetWindowVariant and SetWindowVariant
The membership flag
Bases: wx.lib.scrolledpanel.ScrolledPanel, sans.guiframe.panel_base.PanelBase
Provides the Invariant GUI.
See GetAcceleratorTable and SetAcceleratorTable
AcceptsFocus(self) -> bool
Can this window have focus?
AcceptsFocusFromKeyboard(self) -> bool
Can this window be given focus by keyboard navigation? if not, the only way to give it focus (provided it accepts it at all) is to click it.
AddChild(self, Window child)
Adds a child window. This is called automatically by window creation functions so should not be required by the application programmer.
AddPendingEvent(self, Event event)
AdjustForLayoutDirection(self, int x, int width, int widthTotal) -> int
Mirror coordinates for RTL layout if this window uses it and if the mirroring is not done automatically like Win32.
AdjustScrollbars(self)
AssociateHandle(self, long handle)
Associate the window with a new native handle
See GetAutoLayout and SetAutoLayout
See GetBackgroundColour and SetBackgroundColour
See GetBackgroundStyle and SetBackgroundStyle
See GetBestSize
See GetBestVirtualSize
Bind an event to an event handler.
| Parameters: |
|
|---|
See GetBorder
CacheBestSize(self, Size size)
Cache the best size so it doesn’t need to be calculated again, (at least until some properties of the window change.)
CalcScrollInc(self, ScrollWinEvent event) -> int
CalcScrolledPosition(self, Point pt) -> Point CalcScrolledPosition(int x, int y) -> (sx, sy)
Translate between scrolled and unscrolled coordinates.
CalcUnscrolledPosition(self, Point pt) -> Point CalcUnscrolledPosition(int x, int y) -> (ux, uy)
Translate between scrolled and unscrolled coordinates.
CanSetTransparent(self) -> bool
Returns True if the platform supports setting the transparency for this window. Note that this method will err on the side of caution, so it is possible that this will return False when it is in fact possible to set the transparency.
NOTE: On X-windows systems the X server must have the composite extension loaded, and there must be a composite manager program (such as xcompmgr) running.
CaptureMouse(self)
Directs all mouse input to this window. Call wx.Window.ReleaseMouse to release the capture.
Note that wxWindows maintains the stack of windows having captured the mouse and when the mouse is released the capture returns to the window which had had captured it previously and it is only really released if there were no previous window. In particular, this means that you must release the mouse as many times as you capture it, unless the window receives the wx.MouseCaptureLostEvent event.
Any application which captures the mouse in the beginning of some operation must handle wx.MouseCaptureLostEvent and cancel this operation when it receives the event. The event handler must not recapture mouse.
See GetCaret and SetCaret
Center(self, int direction=BOTH)
Centers the window. The parameter specifies the direction for centering, and may be wx.HORIZONTAL, wx.VERTICAL or wx.BOTH. It may also include wx.CENTER_ON_SCREEN flag if you want to center the window on the entire screen and not on its parent window. If it is a top-level window and has no parent then it will always be centered relative to the screen.
CenterOnParent(self, int dir=BOTH)
Center with respect to the the parent window
Center(self, int direction=BOTH)
Centers the window. The parameter specifies the direction for centering, and may be wx.HORIZONTAL, wx.VERTICAL or wx.BOTH. It may also include wx.CENTER_ON_SCREEN flag if you want to center the window on the entire screen and not on its parent window. If it is a top-level window and has no parent then it will always be centered relative to the screen.
CenterOnParent(self, int dir=BOTH)
Center with respect to the the parent window
See GetCharHeight
See GetCharWidth
See GetChildren
See GetClassName
ClearBackground(self)
Clears the window by filling it with the current background colour. Does not cause an erase background event to be generated.
See GetClientAreaOrigin
See GetClientRect and SetClientRect
See GetClientSize and SetClientSize
ClientToScreen(self, Point pt) -> Point
Converts to screen coordinates from coordinates relative to this window.
ClientToScreenXY(int x, int y) -> (x,y)
Converts to screen coordinates from coordinates relative to this window.
ClientToWindowSize(self, Size size) -> Size
Close(self, bool force=False) -> bool
This function simply generates a EVT_CLOSE event whose handler usually tries to close the window. It doesn’t close the window itself, however. If force is False (the default) then the window’s close handler will be allowed to veto the destruction of the window.
Connect(self, int id, int lastId, int eventType, PyObject func)
See GetConstraints and SetConstraints
See GetContainingSizer and SetContainingSizer
ConvertDialogPointToPixels(self, Point pt) -> Point
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
ConvertDialogSizeToPixels(self, Size sz) -> Size
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
ConvertPixelPointToDialog(self, Point pt) -> Point
ConvertPixelSizeToDialog(self, Size sz) -> Size
Create the GUI part of the Window for 2-phase creation mode.
See GetCursor and SetCursor
DLG_PNT(self, Point pt) -> Point
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
DLG_SZE(self, Size sz) -> Size
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
See GetDefaultAttributes
Destroy(self) -> bool
Destroys the window safely. Frames and dialogs are not destroyed immediately when this function is called – they are added to a list of windows to be deleted on idle time, when all the window’s events have been processed. This prevents problems with events being sent to non-existent windows.
Returns True if the window has either been successfully deleted, or it has been added to the list of windows pending real deletion.
DestroyChildren(self) -> bool
Destroys all children of a window. Called automatically by the destructor.
Disable(self) -> bool
Disables the window, same as Enable(false).
DissociateHandle(self)
Dissociate the current native handle from the window
DoEraseBackground(self, DC dc) -> bool
DoGetBestSize(self) -> Size
DoGetClientSize() -> (width, height)
DoGetPosition() -> (x,y)
DoGetSize() -> (width, height)
DoGetVirtualSize(self) -> Size
DoMoveWindow(self, int x, int y, int width, int height)
DoPrepareDC(self, DC dc)
Normally what is called by PrepareDC.
DoSetClientSize(self, int width, int height)
DoSetSize(self, int x, int y, int width, int height, int sizeFlags=SIZE_AUTO)
DoSetVirtualSize(self, int x, int y)
DragAcceptFiles(self, bool accept)
Enables or disables eligibility for drop file events, EVT_DROP_FILES.
See GetDropTarget and SetDropTarget
See GetEffectiveMinSize
Enable(self, bool enable=True) -> bool
Enable or disable the window for user input. Note that when a parent window is disabled, all of its children are disabled as well and they are reenabled again when the parent is. Returns true if the window has been enabled or disabled, false if nothing was done, i.e. if the window had already been in the specified state.
EnableScrolling(self, bool x_scrolling, bool y_scrolling)
See IsEnabled and Enable
See GetEventHandler and SetEventHandler
See GetEvtHandlerEnabled and SetEvtHandlerEnabled
See GetExtraStyle and SetExtraStyle
FindFocus() -> Window
Returns the window or control that currently has the keyboard focus, or None.
FindWindowById(self, long winid) -> Window
Find a child of this window by window ID
FindWindowByLabel(self, String label) -> Window
Find a child of this window by label
FindWindowByName(self, String name) -> Window
Find a child of this window by name
Fit(self)
Sizes the window so that it fits around its subwindows. This function won’t do anything if there are no subwindows and will only really work correctly if sizers are used for the subwindows layout. Also, if the window has exactly one subwindow it is better (faster and the result is more precise as Fit adds some margin to account for fuzziness of its calculations) to call window.SetClientSize(child.GetSize()) instead of calling Fit.
FitInside(self)
Similar to Fit, but sizes the interior (virtual) size of a window. Mainly useful with scrolled windows to reset scrollbars after sizing changes that do not trigger a size event, and/or scrolled windows without an interior sizer. This function similarly won’t do anything if there are no subwindows.
See GetFont and SetFont
See GetForegroundColour and SetForegroundColour
Freeze(self)
Freezes the window or, in other words, prevents any updates from taking place on screen, the window is not redrawn at all. Thaw must be called to reenable window redrawing. Calls to Freeze/Thaw may be nested, with the actual Thaw being delayed until all the nesting has been undone.
This method is useful for visual appearance optimization (for example, it is a good idea to use it before inserting large amount of text into a wxTextCtrl under wxGTK) but is not implemented on all platforms nor for all controls so it is mostly just a hint to wxWindows and not a mandatory directive.
GetAcceleratorTable(self) -> AcceleratorTable
Gets the accelerator table for this window.
Use GetEffectiveMinSize instead.
GetAutoLayout(self) -> bool
Returns the current autoLayout setting
GetBackgroundColour(self) -> Colour
Returns the background colour of the window.
GetBackgroundStyle(self) -> int
Returns the background style of the window.
| See : | SetBackgroundStyle |
|---|
Use GetEffectiveMinSize instead.
GetBestSize(self) -> Size
This function returns the best acceptable minimal size for the window, if applicable. For example, for a static text control, it will be the minimal size such that the control label is not truncated. For windows containing subwindows (such as wx.Panel), the size returned by this function will be the same as the size the window would have had after calling Fit.
GetBestSizeTuple() -> (width, height)
This function returns the best acceptable minimal size for the window, if applicable. For example, for a static text control, it will be the minimal size such that the control label is not truncated. For windows containing subwindows (such as wx.Panel), the size returned by this function will be the same as the size the window would have had after calling Fit.
GetBestVirtualSize(self) -> Size
Return the largest of ClientSize and BestSize (as determined by a sizer, interior children, or other means)
GetBorder(self, long flags) -> int GetBorder(self) -> int
Get border for the flags of this window
GetCapture() -> Window
Returns the window which currently captures the mouse or None
GetCaret(self) -> Caret
Returns the caret associated with the window.
GetCharHeight(self) -> int
Get the (average) character size for the current font.
GetCharWidth(self) -> int
Get the (average) character size for the current font.
GetChildren(self) -> WindowList
Returns an object containing a list of the window’s children. The object provides a Python sequence-like interface over the internal list maintained by the window..
GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
Get the default attributes for this class. This is useful if you want to use the same font or colour in your own control as in a standard control – which is a much better idea than hard coding specific colours or fonts which might look completely out of place on the user’s system, especially if it uses themes.
The variant parameter is only relevant under Mac currently and is ignore under other platforms. Under Mac, it will change the size of the returned font. See wx.Window.SetWindowVariant for more about this.
GetClassName(self) -> String
Returns the class name of the C++ class using wxRTTI.
GetClientAreaOrigin(self) -> Point
Get the origin of the client area of the window relative to the window’s top left corner (the client area may be shifted because of the borders, scrollbars, other decorations...)
GetClientRect(self) -> Rect
Get the client area position and size as a wx.Rect object.
GetClientSize(self) -> Size
This gets the size of the window’s ‘client area’ in pixels. The client area is the area which may be drawn on by the programmer, excluding title bar, border, scrollbars, etc.
GetClientSizeTuple() -> (width, height)
This gets the size of the window’s ‘client area’ in pixels. The client area is the area which may be drawn on by the programmer, excluding title bar, border, scrollbars, etc.
GetConstraints(self) -> LayoutConstraints
Returns a pointer to the window’s layout constraints, or None if there are none.
GetContainingSizer(self) -> Sizer
Return the sizer that this window is a member of, if any, otherwise None.
GetCursor(self) -> Cursor
Return the cursor associated with this window.
GetDefaultAttributes(self) -> VisualAttributes
GetDropTarget(self) -> DropTarget
Returns the associated drop target, which may be None.
GetEffectiveMinSize(self) -> Size
This function will merge the window’s best size into the window’s minimum size, giving priority to the min size components, and returns the results.
GetEventHandler(self) -> EvtHandler
Returns the event handler for this window. By default, the window is its own event handler.
GetEvtHandlerEnabled(self) -> bool
GetExtraStyle(self) -> long
Returns the extra style bits for the window.
GetFont(self) -> Font
Returns the default font used for this window.
GetForegroundColour(self) -> Colour
Returns the foreground colour of the window. The interpretation of foreground colour is dependent on the window class; it may be the text colour or other colour, or it may not be used at all.
Get the width, height, decent and leading of the text using the current or specified font.
GetGrandParent(self) -> Window
Returns the parent of the parent of this window, or None if there isn’t one.
GetGtkWidget(self) -> long
On wxGTK returns a pointer to the GtkWidget for this window as a long integer. On the other platforms this method returns zero.
GetHandle(self) -> long
Returns the platform-specific handle (as a long integer) of the physical window. On wxMSW this is the win32 window handle, on wxGTK it is the XWindow ID, and on wxMac it is the ControlRef.
GetHelpText(self) -> String
Gets the help text to be used as context-sensitive help for this window. Note that the text is actually stored by the current wx.HelpProvider implementation, and not in the window object itself.
GetHelpTextAtPoint(self, Point pt, wxHelpEvent::Origin origin) -> String
Get the help string associated with the given position in this window.
Notice that pt may be invalid if event origin is keyboard or unknown and this method should return the global window help text then
GetId(self) -> int
Returns the identifier of the window. Each window has an integer identifier. If the application has not provided one (or the default Id -1 is used) then an unique identifier with a negative value will be generated.
GetLabel(self) -> String
Generic way of getting a label from any window, for identification purposes. The interpretation of this function differs from class to class. For frames and dialogs, the value returned is the title. For buttons or static text controls, it is the button text. This function can be useful for meta-programs such as testing tools or special-needs access programs)which need to identify windows by name.
GetLayoutDirection(self) -> int
Get the layout direction (LTR or RTL) for this window. Returns wx.Layout_Default if layout direction is not supported.
GetMaxHeight(self) -> int
GetMaxSize(self) -> Size
GetMaxWidth(self) -> int
GetMinHeight(self) -> int
GetMinSize(self) -> Size
GetMinWidth(self) -> int
GetName(self) -> String
Returns the windows name. This name is not guaranteed to be unique; it is up to the programmer to supply an appropriate name in the window constructor or via wx.Window.SetName.
GetNextHandler(self) -> EvtHandler
GetParent(self) -> Window
Returns the parent window of this window, or None if there isn’t one.
GetPosition(self) -> Point
Get the window’s position. Notice that the position is in client coordinates for child windows and screen coordinates for the top level ones, use GetScreenPosition if you need screen coordinates for all kinds of windows.
GetPositionTuple() -> (x,y)
Get the window’s position. Notice that the position is in client coordinates for child windows and screen coordinates for the top level ones, use GetScreenPosition if you need screen coordinates for all kinds of windows.
GetPreviousHandler(self) -> EvtHandler
GetRect(self) -> Rect
Returns the size and position of the window as a wx.Rect object.
GetScaleX(self) -> double
GetScaleY(self) -> double
GetScreenPosition(self) -> Point
Get the position of the window in screen coordinantes.
GetScreenPositionTuple() -> (x,y)
Get the position of the window in screen coordinantes.
GetScreenRect(self) -> Rect
Returns the size and position of the window in screen coordinantes as a wx.Rect object.
GetScrollPageSize(self, int orient) -> int
GetScrollPixelsPerUnit() -> (xUnit, yUnit)
Get the size of one logical unit in physical units.
GetScrollPos(self, int orientation) -> int
Returns the built-in scrollbar position.
GetScrollRange(self, int orientation) -> int
Returns the built-in scrollbar range.
GetScrollThumb(self, int orientation) -> int
Returns the built-in scrollbar thumb size.
GetSize(self) -> Size
Get the window size.
GetSizeTuple() -> (width, height)
Get the window size.
GetSizer(self) -> Sizer
Return the sizer associated with the window by a previous call to SetSizer or None if there isn’t one.
GetTargetRect(self) -> Rect
GetTargetWindow(self) -> Window
GetTextExtent(String string) -> (width, height)
Get the width and height of the text using the current font.
GetThemeEnabled(self) -> bool
Return the themeEnabled flag.
GetToolTip(self) -> ToolTip
get the associated tooltip or None if none
GetTopLevelParent(self) -> Window
Returns the first frame or dialog in this window’s parental hierarchy.
GetUpdateClientRect(self) -> Rect
Get the update rectangle region bounding box in client coords.
GetUpdateRegion(self) -> Region
Returns the region specifying which parts of the window have been damaged. Should only be called within an EVT_PAINT handler.
GetValidator(self) -> Validator
Returns a pointer to the current validator for the window, or None if there is none.
GetViewStart() -> (x,y)
Get the view start
GetVirtualSize(self) -> Size
Get the the virtual size of the window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
GetVirtualSizeTuple() -> (width, height)
Get the the virtual size of the window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
GetWindowBorderSize(self) -> Size
Return the size of the left/right and top/bottom borders.
GetWindowStyleFlag(self) -> long
Gets the window style that was passed to the constructor or Create method.
GetWindowStyleFlag(self) -> long
Gets the window style that was passed to the constructor or Create method.
GetWindowVariant(self) -> int
See GetGrandParent
GetGtkWidget(self) -> long
On wxGTK returns a pointer to the GtkWidget for this window as a long integer. On the other platforms this method returns zero.
See GetHandle
HasCapture(self) -> bool
Returns true if this window has the current mouse capture.
HasFlag(self, int flag) -> bool
Test if the given style is set for this window.
HasMultiplePages(self) -> bool
HasScrollbar(self, int orient) -> bool
Does the window have the scrollbar for this orientation?
HasTransparentBackground(self) -> bool
Returns True if this window’s background is transparent (as, for example, for wx.StaticText) and should show the parent window’s background.
This method is mostly used internally by the library itself and you normally shouldn’t have to call it. You may, however, have to override it in your custom control classes to ensure that background is painted correctly.
See GetHelpText and SetHelpText
Hide(self) -> bool
Equivalent to calling Show(False).
HitTest(self, Point pt) -> int
Test where the given (in client coords) point lies
HitTestXY(self, int x, int y) -> int
Test where the given (in client coords) point lies
See GetId and SetId
InheritAttributes(self)
This function is (or should be, in case of custom controls) called during window creation to intelligently set up the window visual attributes, that is the font and the foreground and background colours.
By ‘intelligently’ the following is meant: by default, all windows use their own default attributes. However if some of the parent’s attributes are explicitly changed (that is, using SetFont and not SetOwnFont) and if the corresponding attribute hadn’t been explicitly set for this window itself, then this window takes the same value as used by the parent. In addition, if the window overrides ShouldInheritColours to return false, the colours will not be changed no matter what and only the font might.
This rather complicated logic is necessary in order to accommodate the different usage scenarios. The most common one is when all default attributes are used and in this case, nothing should be inherited as in modern GUIs different controls use different fonts (and colours) than their siblings so they can’t inherit the same value from the parent. However it was also deemed desirable to allow to simply change the attributes of all children at once by just changing the font or colour of their common parent, hence in this case we do inherit the parents attributes.
InheritsBackgroundColour(self) -> bool
InitDialog(self)
Sends an EVT_INIT_DIALOG event, whose handler usually transfers data to the dialog via validators.
InvalidateBestSize(self)
Reset the cached best size value so it will be recalculated the next time it is needed.
IsBeingDeleted(self) -> bool
Is the window in the process of being deleted?
IsDoubleBuffered(self) -> bool
Returns True if the window contents is double-buffered by the system, i.e. if any drawing done on the window is really done on a temporary backing surface and transferred to the screen all at once later.
IsEnabled(self) -> bool
Returns true if the window is enabled for input, false otherwise.
IsExposed(self, int x, int y, int w=1, int h=1) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsExposedPoint(self, Point pt) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsExposedRect(self, Rect rect) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsFrozen(self) -> bool
Returns True if the window has been frozen and not thawed yet.
| See : | Freeze and Thaw |
|---|
IsRetained(self) -> bool
Returns true if the window is retained, false otherwise. Retained windows are only available on X platforms.
IsSameAs(self, Object p) -> bool
For wx.Objects that use C++ reference counting internally, this method can be used to determine if two objects are referencing the same data object.
IsShown(self) -> bool
Returns true if the window is shown, false if it has been hidden.
IsShownOnScreen(self) -> bool
Returns True if the window is physically visible on the screen, i.e. it is shown and all its parents up to the toplevel window are shown as well.
IsTopLevel(self) -> bool
Returns true if the given window is a top-level one. Currently all frames and dialogs are always considered to be top-level windows (even if they have a parent window).
See GetLabel and SetLabel
Layout(self) -> bool
Invokes the constraint-based layout algorithm or the sizer-based algorithm for this window. See SetAutoLayout: when auto layout is on, this function gets called automatically by the default EVT_SIZE handler when the window is resized.
See GetLayoutDirection and SetLayoutDirection
LineDown(self) -> bool
This is just a wrapper for ScrollLines(1).
LineUp(self) -> bool
This is just a wrapper for ScrollLines(-1).
Lower(self)
Lowers the window to the bottom of the window hierarchy. In current version of wxWidgets this works both for managed and child windows.
MakeModal(self, bool modal=True)
Disables all other windows in the application so that the user can only interact with this window. Passing False will reverse this effect.
See GetMaxHeight
See GetMaxSize and SetMaxSize
See GetMaxWidth
See GetMinHeight
See GetMinSize and SetMinSize
See GetMinWidth
Move(self, Point pt, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
MoveAfterInTabOrder(self, Window win)
Moves this window in the tab navigation order after the specified sibling window. This means that when the user presses the TAB key on that other window, the focus switches to this window.
The default tab order is the same as creation order. This function and MoveBeforeInTabOrder allow to change it after creating all the windows.
MoveBeforeInTabOrder(self, Window win)
Same as MoveAfterInTabOrder except that it inserts this window just before win instead of putting it right after it.
MoveXY(self, int x, int y, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
See GetName and SetName
Navigate(self, int flags=NavigationKeyEvent.IsForward) -> bool
Does keyboard navigation from this window to another, by sending a wx.NavigationKeyEvent.
NewControlId() -> int
Generate a control id for the controls which were not given one.
NextControlId(int winid) -> int
Get the id of the control following the one with the given autogenerated) id
See GetNextHandler and SetNextHandler
OnInternalIdle(self)
OnPaint(self, PaintEvent event)
PageDown(self) -> bool
This is just a wrapper for ScrollPages(1).
PageUp(self) -> bool
This is just a wrapper for ScrollPages(-1).
See GetParent
PopEventHandler(self, bool deleteHandler=False) -> EvtHandler
Removes and returns the top-most event handler on the event handler stack. If deleteHandler is True then the wx.EvtHandler object will be destroyed after it is popped, and None will be returned instead.
PopupMenu(self, Menu menu, Point pos=DefaultPosition) -> bool
Pops up the given menu at the specified coordinates, relative to this window, and returns control when the user has dismissed the menu. If a menu item is selected, the corresponding menu event is generated and will be processed as usual. If the default position is given then the current position of the mouse cursor will be used.
PopupMenuXY(self, Menu menu, int x=-1, int y=-1) -> bool
Pops up the given menu at the specified coordinates, relative to this window, and returns control when the user has dismissed the menu. If a menu item is selected, the corresponding menu event is generated and will be processed as usual. If the default position is given then the current position of the mouse cursor will be used.
See GetPosition and SetPosition
Phase 3 of the 2-phase create <wink!> Call this method after precreating the window with the 2-phase create method.
PrepareDC(self, DC dc)
Call this function to prepare the device context for drawing a scrolled image. It sets the device origin according to the current scroll position.
PrevControlId(int winid) -> int
Get the id of the control preceding the one with the given autogenerated) id
See GetPreviousHandler and SetPreviousHandler
ProcessEvent(self, Event event) -> bool
ProcessPendingEvents(self)
PushEventHandler(self, EvtHandler handler)
Pushes this event handler onto the event handler stack for the window. An event handler is an object that is capable of processing the events sent to a window. (In other words, is able to dispatch the events to a handler function.) By default, the window is its own event handler, but an application may wish to substitute another, for example to allow central implementation of event-handling for a variety of different window classes.
wx.Window.PushEventHandler allows an application to set up a chain of event handlers, where an event not handled by one event handler is handed to the next one in the chain. Use wx.Window.PopEventHandler to remove the event handler. Ownership of the handler is not given to the window, so you should be sure to pop the handler before the window is destroyed and either let PopEventHandler destroy it, or call its Destroy method yourself.
Raise(self)
Raises the window to the top of the window hierarchy. In current version of wxWidgets this works both for managed and child windows.
See GetRect and SetRect
Refresh(self, bool eraseBackground=True, Rect rect=None)
Mark the specified rectangle (or the whole window) as “dirty” so it will be repainted. Causes an EVT_PAINT event to be generated and sent to the window.
RefreshRect(self, Rect rect, bool eraseBackground=True)
Redraws the contents of the given rectangle: the area inside it will be repainted. This is the same as Refresh but has a nicer syntax.
RegisterHotKey(self, int hotkeyId, int modifiers, int keycode) -> bool
Registers a system wide hotkey. Every time the user presses the hotkey registered here, this window will receive a hotkey event. It will receive the event even if the application is in the background and does not have the input focus because the user is working with some other application. To bind an event handler function to this hotkey use EVT_HOTKEY with an id equal to hotkeyId. Returns True if the hotkey was registered successfully.
ReleaseMouse(self)
Releases mouse input captured with wx.Window.CaptureMouse.
RemoveChild(self, Window child)
Removes a child window. This is called automatically by window deletion functions so should not be required by the application programmer.
RemoveEventHandler(self, EvtHandler handler) -> bool
Find the given handler in the event handler chain and remove (but not delete) it from the event handler chain, returns True if it was found and False otherwise (this also results in an assert failure so this function should only be called when the handler is supposed to be there.)
Reparent(self, Window newParent) -> bool
Reparents the window, i.e the window will be removed from its current parent window (e.g. a non-standard toolbar in a wxFrame) and then re-inserted into another. Available on Windows and GTK. Returns True if the parent was changed, False otherwise (error or newParent == oldParent)
See GetScaleX
See GetScaleY
See GetScreenPosition
See GetScreenRect
ScreenToClient(self, Point pt) -> Point
Converts from screen to client window coordinates.
ScreenToClientXY(int x, int y) -> (x,y)
Converts from screen to client window coordinates.
Scroll(self, int x, int y)
Scrolls the panel such that the specified child window is in view.
ScrollLines(self, int lines) -> bool
If the platform and window class supports it, scrolls the window by the given number of lines down, if lines is positive, or up if lines is negative. Returns True if the window was scrolled, False if it was already on top/bottom and nothing was done.
ScrollPages(self, int pages) -> bool
If the platform and window class supports it, scrolls the window by the given number of pages down, if pages is positive, or up if pages is negative. Returns True if the window was scrolled, False if it was already on top/bottom and nothing was done.
ScrollWindow(self, int dx, int dy, Rect rect=None)
Physically scrolls the pixels in the window and move child windows accordingly. Use this function to optimise your scrolling implementations, to minimise the area that must be redrawn. Note that it is rarely required to call this function from a user program.
SetAcceleratorTable(self, AcceleratorTable accel)
Sets the accelerator table for this window.
SetAutoLayout(self, bool autoLayout)
Determines whether the Layout function will be called automatically when the window is resized. lease note that this only happens for the windows usually used to contain children, namely wx.Panel and wx.TopLevelWindow (and the classes deriving from them).
This method is called implicitly by SetSizer but if you use SetConstraints you should call it manually or otherwise the window layout won’t be correctly updated when its size changes.
SetBackgroundColour(self, Colour colour) -> bool
Sets the background colour of the window. Returns True if the colour was changed. The background colour is usually painted by the default EVT_ERASE_BACKGROUND event handler function under Windows and automatically under GTK. Using wx.NullColour will reset the window to the default background colour.
Note that setting the background colour may not cause an immediate refresh, so you may wish to call ClearBackground or Refresh after calling this function.
Using this function will disable attempts to use themes for this window, if the system supports them. Use with care since usually the themes represent the appearance chosen by the user to be used for all applications on the system.
SetBackgroundStyle(self, int style) -> bool
Returns the background style of the window. The background style indicates how the background of the window is drawn.
wx.BG_STYLE_SYSTEM The background colour or pattern should be determined by the system wx.BG_STYLE_COLOUR The background should be a solid colour wx.BG_STYLE_CUSTOM The background will be implemented by the application.
On GTK+, use of wx.BG_STYLE_CUSTOM allows the flicker-free drawing of a custom background, such as a tiled bitmap. Currently the style has no effect on other platforms.
| See : | GetBackgroundStyle, SetBackgroundColour |
|---|
Use SetInitialSize
SetInitialSize(self, Size size=DefaultSize)
A ‘Smart’ SetSize that will fill in default size components with the window’s best size values. Also set’s the minsize for use with sizers.
SetCaret(self, Caret caret)
Sets the caret associated with the window.
SetClientRect(self, Rect rect)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetClientSize(self, Size size)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetClientSizeWH(self, int width, int height)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetConstraints(self, LayoutConstraints constraints)
Sets the window to have the given layout constraints. If an existing layout constraints object is already owned by the window, it will be deleted. Pass None to disassociate and delete the window’s current constraints.
You must call SetAutoLayout to tell a window to use the constraints automatically in its default EVT_SIZE handler; otherwise, you must handle EVT_SIZE yourself and call Layout() explicitly. When setting both a wx.LayoutConstraints and a wx.Sizer, only the sizer will have effect.
SetContainingSizer(self, Sizer sizer)
This normally does not need to be called by application code. It is called internally when a window is added to a sizer, and is used so the window can remove itself from the sizer when it is destroyed.
SetCursor(self, Cursor cursor) -> bool
Sets the window’s cursor. Notice that the window cursor also sets it for the children of the window implicitly.
The cursor may be wx.NullCursor in which case the window cursor will be reset back to default.
SetDimensions(self, int x, int y, int width, int height, int sizeFlags=SIZE_AUTO)
Sets the position and size of the window in pixels. The sizeFlags parameter indicates the interpretation of the other params if they are equal to -1.
wx.SIZE_AUTO A -1 indicates that a class-specific default should be used. wx.SIZE_USE_EXISTING Existing dimensions should be used if -1 values are supplied. wxSIZE_ALLOW_MINUS_ONE Allow dimensions of -1 and less to be interpreted as real dimensions, not default values.
SetDoubleBuffered(self, bool on)
Put the native window into double buffered or composited mode.
SetDropTarget(self, DropTarget dropTarget)
Associates a drop target with this window. If the window already has a drop target, it is deleted.
SetEventHandler(self, EvtHandler handler)
Sets the event handler for this window. An event handler is an object that is capable of processing the events sent to a window. (In other words, is able to dispatch the events to handler function.) By default, the window is its own event handler, but an application may wish to substitute another, for example to allow central implementation of event-handling for a variety of different window classes.
It is usually better to use wx.Window.PushEventHandler since this sets up a chain of event handlers, where an event not handled by one event handler is handed off to the next one in the chain.
SetEvtHandlerEnabled(self, bool enabled)
SetExtraStyle(self, long exStyle)
Sets the extra style bits for the window. Extra styles are the less often used style bits which can’t be set with the constructor or with SetWindowStyleFlag()
SetFocus(self)
Set’s the focus to this window, allowing it to receive keyboard input.
SetFocusFromKbd(self)
Set focus to this window as the result of a keyboard action. Normally only called internally.
SetFocusIgnoringChildren(self)
In contrast to SetFocus (see above) this will set the focus to the panel even of there are child windows in the panel. This is only rarely needed.
SetFont(self, Font font) -> bool
Sets the font for this window.
SetForegroundColour(self, Colour colour) -> bool
Sets the foreground colour of the window. Returns True is the colour was changed. The interpretation of foreground colour is dependent on the window class; it may be the text colour or other colour, or it may not be used at all.
SetHelpText(self, String text)
Sets the help text to be used as context-sensitive help for this window. Note that the text is actually stored by the current wx.HelpProvider implementation, and not in the window object itself.
SetHelpTextForId(self, String text)
Associate this help text with all windows with the same id as this one.
SetId(self, int winid)
Sets the identifier of the window. Each window has an integer identifier. If the application has not provided one, an identifier will be generated. Normally, the identifier should be provided on creation and should not be modified subsequently.
SetInitialSize(self, Size size=DefaultSize)
A ‘Smart’ SetSize that will fill in default size components with the window’s best size values. Also set’s the minsize for use with sizers.
SetLabel(self, String label)
Set the text which the window shows in its label if applicable.
SetLayoutDirection(self, int dir)
Set the layout direction (LTR or RTL) for this window.
SetMaxSize(self, Size maxSize)
A more convenient method than SetSizeHints for setting just the max size.
SetMinSize(self, Size minSize)
A more convenient method than SetSizeHints for setting just the min size.
SetName(self, String name)
Sets the window’s name. The window name is used for ressource setting in X, it is not the same as the window title/label
SetNextHandler(self, EvtHandler handler)
SetOwnBackgroundColour(self, Colour colour)
SetOwnFont(self, Font font)
SetOwnForegroundColour(self, Colour colour)
Move(self, Point pt, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
SetPreviousHandler(self, EvtHandler handler)
SetRect(self, Rect rect, int sizeFlags=SIZE_AUTO)
Sets the position and size of the window in pixels using a wx.Rect.
SetScale(self, double xs, double ys)
SetScrollPageSize(self, int orient, int pageSize)
SetScrollPos(self, int orientation, int pos, bool refresh=True)
Sets the position of one of the built-in scrollbars.
SetScrollRate(self, int xstep, int ystep)
Sets the scrollbar properties of a built-in scrollbar.
SetSize(self, Size size)
Sets the size of the window in pixels.
Allows specification of minimum and maximum window sizes, and window size increments. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the window outside the given bounds (if it is a top-level window.) Sizers will also inspect the minimum window size and will use that value if set when calculating layout.
The resizing increments are only significant under Motif or Xt.
SetSizeHintsSz(self, Size minSize, Size maxSize=DefaultSize, Size incSize=DefaultSize)
Allows specification of minimum and maximum window sizes, and window size increments. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the window outside the given bounds (if it is a top-level window.) Sizers will also inspect the minimum window size and will use that value if set when calculating layout.
The resizing increments are only significant under Motif or Xt.
SetSizeWH(self, int width, int height)
Sets the size of the window in pixels.
SetSizer(self, Sizer sizer, bool deleteOld=True)
Sets the window to have the given layout sizer. The window will then own the object, and will take care of its deletion. If an existing layout sizer object is already owned by the window, it will be deleted if the deleteOld parameter is true. Note that this function will also call SetAutoLayout implicitly with a True parameter if the sizer is non-None, and False otherwise.
SetSizerAndFit(self, Sizer sizer, bool deleteOld=True)
The same as SetSizer, except it also sets the size hints for the window based on the sizer’s minimum size.
SetTargetRect(self, Rect rect)
SetTargetWindow(self, Window target)
SetThemeEnabled(self, bool enableTheme)
Dialogs, notebook pages and the status bar have this flag set to true by default so that the default look and feel is simulated best.
SetToolTip(self, ToolTip tip)
Attach a tooltip to the window.
SetToolTipString(self, String tip)
Attach a tooltip to the window.
SetTransparent(self, byte alpha) -> bool
Attempt to set the transparency of this window to the alpha value, returns True on success. The alpha value is an integer in the range of 0 to 255, where 0 is fully transparent and 255 is fully opaque.
SetValidator(self, Validator validator)
Deletes the current validator (if any) and sets the window validator, having called wx.Validator.Clone to create a new validator of this type.
SetVirtualSize(self, Size size)
Set the the virtual size of a window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
SetVirtualSizeHints(self, int minW, int minH, int maxW=-1, int maxH=-1)
Allows specification of minimum and maximum virtual window sizes. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the virtual area of the window outside the given bounds.
SetVirtualSizeHintsSz(self, Size minSize, Size maxSize=DefaultSize)
Allows specification of minimum and maximum virtual window sizes. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the virtual area of the window outside the given bounds.
SetVirtualSizeWH(self, int w, int h)
Set the the virtual size of a window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
SetWindowStyleFlag(self, long style)
Sets the style of the window. Please note that some styles cannot be changed after the window creation and that Refresh() might need to be called after changing the others for the change to take place immediately.
SetWindowStyleFlag(self, long style)
Sets the style of the window. Please note that some styles cannot be changed after the window creation and that Refresh() might need to be called after changing the others for the change to take place immediately.
SetWindowVariant(self, int variant)
Sets the variant of the window/font size to use for this window, if the platform supports variants, for example, wxMac.
This function sets up the event handling necessary to handle scrolling properly. It should be called within the __init__ function of any class that is derived from ScrolledPanel, once the controls on the panel have been constructed and thus the size of the scrolling area can be determined.
ShouldInheritColours(self) -> bool
Return true from here to allow the colours of this window to be changed by InheritAttributes, returning false forbids inheriting them from the parent window.
The base class version returns false, but this method is overridden in wxControl where it returns true.
Show(self, bool show=True) -> bool
Shows or hides the window. You may need to call Raise for a top level window if you want to bring it to top, although this is not needed if Show is called immediately after the frame creation. Returns True if the window has been shown or hidden or False if nothing was done because it already was in the requested state.
See IsShown and Show
See GetSize and SetSize
See GetSizer and SetSizer
See GetTargetWindow and SetTargetWindow
Thaw(self)
Reenables window updating after a previous call to Freeze. Calls to Freeze/Thaw may be nested, so Thaw must be called the same number of times that Freeze was before the window will be updated.
See GetThemeEnabled and SetThemeEnabled
ToggleWindowStyle(self, int flag) -> bool
Turn the flag on if it had been turned off before and vice versa, returns True if the flag is turned on by this function call.
See GetToolTip and SetToolTip
See IsTopLevel
See GetTopLevelParent
TransferDataFromWindow(self) -> bool
Transfers values from child controls to data areas specified by their validators. Returns false if a transfer failed. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call TransferDataFromWindow() of all child windows.
TransferDataToWindow(self) -> bool
Transfers values to child controls from data areas specified by their validators. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call TransferDataToWindow() of all child windows.
Disconnects the event handler binding for event from self. Returns True if successful.
UnregisterHotKey(self, int hotkeyId) -> bool
Unregisters a system wide hotkey.
Update(self)
Calling this method immediately repaints the invalidated area of the window instead of waiting for the EVT_PAINT event to happen, (normally this would usually only happen when the flow of control returns to the event loop.) Notice that this function doesn’t refresh the window and does nothing if the window has been already repainted. Use Refresh first if you want to immediately redraw the window (or some portion of it) unconditionally.
See GetUpdateClientRect
See GetUpdateRegion
UpdateWindowUI(self, long flags=UPDATE_UI_NONE)
This function sends EVT_UPDATE_UI events to the window. The particular implementation depends on the window; for example a wx.ToolBar will send an update UI event for each toolbar button, and a wx.Frame will send an update UI event for each menubar menu item. You can call this function from your application to ensure that your UI is up-to-date at a particular point in time (as far as your EVT_UPDATE_UI handlers are concerned). This may be necessary if you have called wx.UpdateUIEvent.SetMode or wx.UpdateUIEvent.SetUpdateInterval to limit the overhead that wxWindows incurs by sending update UI events in idle time.
UseBgCol(self) -> bool
Validate(self) -> bool
Validates the current values of the child controls using their validators. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call Validate() of all child windows. Returns false if any of the validations failed.
See GetValidator and SetValidator
See GetViewStart
See GetVirtualSize and SetVirtualSize
WarpPointer(self, int x, int y)
Moves the pointer to the given position on the window.
NOTE: This function is not supported under Mac because Apple Human Interface Guidelines forbid moving the mouse cursor programmatically.
See GetWindowStyle and SetWindowStyle
See GetWindowStyleFlag and SetWindowStyleFlag
WindowToClientSize(self, Size size) -> Size
See GetWindowVariant and SetWindowVariant
Please use PyScrolledWindow.AcceptsFocus instead.
Please use PyScrolledWindow.AcceptsFocusFromKeyboard instead.
Please use PyScrolledWindow.AddChild instead.
Please use PyScrolledWindow.DoGetBestSize instead.
Please use PyScrolledWindow.DoGetClientSize instead.
Please use PyScrolledWindow.DoGetPosition instead.
Please use PyScrolledWindow.DoGetSize instead.
Please use PyScrolledWindow.DoGetVirtualSize instead.
Please use PyScrolledWindow.DoMoveWindow instead.
Please use PyScrolledWindow.DoSetClientSize instead.
Please use PyScrolledWindow.DoSetSize instead.
Please use PyScrolledWindow.DoSetVirtualSize instead.
Please use PyScrolledWindow.Enable instead.
Please use PyScrolledWindow.GetDefaultAttributes instead.
Please use PyScrolledWindow.GetMaxSize instead.
Please use PyScrolledWindow.InitDialog instead.
Please use PyScrolledWindow.OnInternalIdle instead.
Please use PyScrolledWindow.RemoveChild instead.
Please use PyScrolledWindow.ShouldInheritColours instead.
Please use PyScrolledWindow.TransferDataFromWindow instead.
Please use PyScrolledWindow.TransferDataToWindow instead.
Please use PyScrolledWindow.Validate instead.
Clear panel to defaults, used by set_state of manager
compute invariant
open another panel for more details on invariant calculation
return the background textcrtl value as a float
Get the bookmark state given by number
: param num: the given bookmark number
Get the bookmark flag to update appropriately the tool bar
return the contrast textcrtl value as a float
Get the copy flag to update appropriately the tool bar
Get the drag flag to update appropriately the tool bar
Get the copy flag to update appropriately the tool bar
return the porod constant textcrtl value as a float
Get the preview flag to update appropriately the tool bar
Get the print flag to update appropriately the tool bar
Get the redo flag to update appropriately the tool bar
Get the reset flag to update appropriately the tool bar
Get the save flag to update appropriately the tool bar
return the scale textcrtl value as a float
Get the state given by number
: param state_num: the given state number
Get the undo flag to update appropriately the tool bar
Get the zoom flag to update appropriately the tool bar
Get the zoom in flag to update appropriately the tool bar
Get the zoom out flag to update appropriately the tool bar
| Parameters: | event – contains parameter enable . when enable is set to True |
|---|
the application is in Batch mode else the application is default mode(single mode)
Save the panel state in memory and add the list on the popup menu on bookmark context menu event
The copy action if possible
The derivative class allows dragging motion if implemented
The derivative class is on unfocus if implemented
The paste action if possible
Invoke report dialog panel
: param event: report button event
Go forward to the previous state
: param event: redo button event
The derivative class state is restored
Save invariant state into a file
The derivative class is on focus if implemented
Go back to the previous state
: param event: undo button event
The derivative class is on zoom mode (using pane) if zoom mode is implemented
The derivative class is on zoom in mode if implemented
The derivative class is on zoom out mode if implemented
set the panel at its initial state.
Set the data
return float value necessary to compute invariant a high q
return float value necessary to compute invariant a low q
set value for the manager
Display warning message if available
set state when loading it from a .inv/.svs file
The membership flag
Bases: wx._windows.Frame
See GetAcceleratorTable and SetAcceleratorTable
AcceptsFocus(self) -> bool
Can this window have focus?
AcceptsFocusFromKeyboard(self) -> bool
Can this window be given focus by keyboard navigation? if not, the only way to give it focus (provided it accepts it at all) is to click it.
AddChild(self, Window child)
Adds a child window. This is called automatically by window creation functions so should not be required by the application programmer.
AddPendingEvent(self, Event event)
AdjustForLayoutDirection(self, int x, int width, int widthTotal) -> int
Mirror coordinates for RTL layout if this window uses it and if the mirroring is not done automatically like Win32.
AssociateHandle(self, long handle)
Associate the window with a new native handle
See GetAutoLayout and SetAutoLayout
See GetBackgroundColour and SetBackgroundColour
See GetBackgroundStyle and SetBackgroundStyle
See GetBestSize
See GetBestVirtualSize
Bind an event to an event handler.
| Parameters: |
|
|---|
See GetBorder
CacheBestSize(self, Size size)
Cache the best size so it doesn’t need to be calculated again, (at least until some properties of the window change.)
CanSetTransparent(self) -> bool
Returns True if the platform supports setting the transparency for this window. Note that this method will err on the side of caution, so it is possible that this will return False when it is in fact possible to set the transparency.
NOTE: On X-windows systems the X server must have the composite extension loaded, and there must be a composite manager program (such as xcompmgr) running.
CaptureMouse(self)
Directs all mouse input to this window. Call wx.Window.ReleaseMouse to release the capture.
Note that wxWindows maintains the stack of windows having captured the mouse and when the mouse is released the capture returns to the window which had had captured it previously and it is only really released if there were no previous window. In particular, this means that you must release the mouse as many times as you capture it, unless the window receives the wx.MouseCaptureLostEvent event.
Any application which captures the mouse in the beginning of some operation must handle wx.MouseCaptureLostEvent and cancel this operation when it receives the event. The event handler must not recapture mouse.
See GetCaret and SetCaret
Center(self, int direction=BOTH)
Centers the window. The parameter specifies the direction for centering, and may be wx.HORIZONTAL, wx.VERTICAL or wx.BOTH. It may also include wx.CENTER_ON_SCREEN flag if you want to center the window on the entire screen and not on its parent window. If it is a top-level window and has no parent then it will always be centered relative to the screen.
CenterOnParent(self, int dir=BOTH)
Center with respect to the the parent window
CenterOnScreen(self, int dir=BOTH)
Center the window on screen
Center(self, int direction=BOTH)
Centers the window. The parameter specifies the direction for centering, and may be wx.HORIZONTAL, wx.VERTICAL or wx.BOTH. It may also include wx.CENTER_ON_SCREEN flag if you want to center the window on the entire screen and not on its parent window. If it is a top-level window and has no parent then it will always be centered relative to the screen.
CenterOnParent(self, int dir=BOTH)
Center with respect to the the parent window
CenterOnScreen(self, int dir=BOTH)
Center the window on screen
See GetCharHeight
See GetCharWidth
See GetChildren
See GetClassName
ClearBackground(self)
Clears the window by filling it with the current background colour. Does not cause an erase background event to be generated.
See GetClientAreaOrigin
See GetClientRect and SetClientRect
See GetClientSize and SetClientSize
ClientToScreen(self, Point pt) -> Point
Converts to screen coordinates from coordinates relative to this window.
ClientToScreenXY(int x, int y) -> (x,y)
Converts to screen coordinates from coordinates relative to this window.
ClientToWindowSize(self, Size size) -> Size
Close(self, bool force=False) -> bool
This function simply generates a EVT_CLOSE event whose handler usually tries to close the window. It doesn’t close the window itself, however. If force is False (the default) then the window’s close handler will be allowed to veto the destruction of the window.
ProcessCommand(self, int winid) -> bool
Connect(self, int id, int lastId, int eventType, PyObject func)
See GetConstraints and SetConstraints
See GetContainingSizer and SetContainingSizer
ConvertDialogPointToPixels(self, Point pt) -> Point
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
ConvertDialogSizeToPixels(self, Size sz) -> Size
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
ConvertPixelPointToDialog(self, Point pt) -> Point
ConvertPixelSizeToDialog(self, Size sz) -> Size
CreateToolBar(self, long style=-1, int winid=-1, String name=ToolBarNameStr) -> wxToolBar
See GetCursor and SetCursor
DLG_PNT(self, Point pt) -> Point
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
DLG_SZE(self, Size sz) -> Size
Converts a point or size from dialog units to pixels. Dialog units are used for maintaining a dialog’s proportions even if the font changes. For the x dimension, the dialog units are multiplied by the average character width and then divided by 4. For the y dimension, the dialog units are multiplied by the average character height and then divided by 8.
See GetDefaultAttributes
See GetDefaultItem and SetDefaultItem
Destroy(self) -> bool
Destroys the window safely. Frames and dialogs are not destroyed immediately when this function is called – they are added to a list of windows to be deleted on idle time, when all the window’s events have been processed. This prevents problems with events being sent to non-existent windows.
Returns True if the window has either been successfully deleted, or it has been added to the list of windows pending real deletion.
DestroyChildren(self) -> bool
Destroys all children of a window. Called automatically by the destructor.
Disable(self) -> bool
Disables the window, same as Enable(false).
DissociateHandle(self)
Dissociate the current native handle from the window
DoGiveHelp(self, String text, bool show)
DoMenuUpdates(self, Menu menu=None)
DragAcceptFiles(self, bool accept)
Enables or disables eligibility for drop file events, EVT_DROP_FILES.
See GetDropTarget and SetDropTarget
See GetEffectiveMinSize
Enable(self, bool enable=True) -> bool
Enable or disable the window for user input. Note that when a parent window is disabled, all of its children are disabled as well and they are reenabled again when the parent is. Returns true if the window has been enabled or disabled, false if nothing was done, i.e. if the window had already been in the specified state.
EnableCloseButton(self, bool enable) -> bool
See IsEnabled and Enable
See GetEventHandler and SetEventHandler
See GetEvtHandlerEnabled and SetEvtHandlerEnabled
See GetExtraStyle and SetExtraStyle
FindFocus() -> Window
Returns the window or control that currently has the keyboard focus, or None.
FindWindowById(self, long winid) -> Window
Find a child of this window by window ID
FindWindowByLabel(self, String label) -> Window
Find a child of this window by label
FindWindowByName(self, String name) -> Window
Find a child of this window by name
Fit(self)
Sizes the window so that it fits around its subwindows. This function won’t do anything if there are no subwindows and will only really work correctly if sizers are used for the subwindows layout. Also, if the window has exactly one subwindow it is better (faster and the result is more precise as Fit adds some margin to account for fuzziness of its calculations) to call window.SetClientSize(child.GetSize()) instead of calling Fit.
FitInside(self)
Similar to Fit, but sizes the interior (virtual) size of a window. Mainly useful with scrolled windows to reset scrollbars after sizing changes that do not trigger a size event, and/or scrolled windows without an interior sizer. This function similarly won’t do anything if there are no subwindows.
See GetFont and SetFont
See GetForegroundColour and SetForegroundColour
Freeze(self)
Freezes the window or, in other words, prevents any updates from taking place on screen, the window is not redrawn at all. Thaw must be called to reenable window redrawing. Calls to Freeze/Thaw may be nested, with the actual Thaw being delayed until all the nesting has been undone.
This method is useful for visual appearance optimization (for example, it is a good idea to use it before inserting large amount of text into a wxTextCtrl under wxGTK) but is not implemented on all platforms nor for all controls so it is mostly just a hint to wxWindows and not a mandatory directive.
GetAcceleratorTable(self) -> AcceleratorTable
Gets the accelerator table for this window.
Use GetEffectiveMinSize instead.
GetAutoLayout(self) -> bool
Returns the current autoLayout setting
GetBackgroundColour(self) -> Colour
Returns the background colour of the window.
GetBackgroundStyle(self) -> int
Returns the background style of the window.
| See : | SetBackgroundStyle |
|---|
Use GetEffectiveMinSize instead.
GetBestSize(self) -> Size
This function returns the best acceptable minimal size for the window, if applicable. For example, for a static text control, it will be the minimal size such that the control label is not truncated. For windows containing subwindows (such as wx.Panel), the size returned by this function will be the same as the size the window would have had after calling Fit.
GetBestSizeTuple() -> (width, height)
This function returns the best acceptable minimal size for the window, if applicable. For example, for a static text control, it will be the minimal size such that the control label is not truncated. For windows containing subwindows (such as wx.Panel), the size returned by this function will be the same as the size the window would have had after calling Fit.
GetBestVirtualSize(self) -> Size
Return the largest of ClientSize and BestSize (as determined by a sizer, interior children, or other means)
GetBorder(self, long flags) -> int GetBorder(self) -> int
Get border for the flags of this window
GetCapture() -> Window
Returns the window which currently captures the mouse or None
GetCaret(self) -> Caret
Returns the caret associated with the window.
GetCharHeight(self) -> int
Get the (average) character size for the current font.
GetCharWidth(self) -> int
Get the (average) character size for the current font.
GetChildren(self) -> WindowList
Returns an object containing a list of the window’s children. The object provides a Python sequence-like interface over the internal list maintained by the window..
GetClassDefaultAttributes(int variant=WINDOW_VARIANT_NORMAL) -> VisualAttributes
Get the default attributes for this class. This is useful if you want to use the same font or colour in your own control as in a standard control – which is a much better idea than hard coding specific colours or fonts which might look completely out of place on the user’s system, especially if it uses themes.
The variant parameter is only relevant under Mac currently and is ignore under other platforms. Under Mac, it will change the size of the returned font. See wx.Window.SetWindowVariant for more about this.
GetClassName(self) -> String
Returns the class name of the C++ class using wxRTTI.
GetClientAreaOrigin(self) -> Point
Get the origin of the client area of the window relative to the window’s top left corner (the client area may be shifted because of the borders, scrollbars, other decorations...)
GetClientRect(self) -> Rect
Get the client area position and size as a wx.Rect object.
GetClientSize(self) -> Size
This gets the size of the window’s ‘client area’ in pixels. The client area is the area which may be drawn on by the programmer, excluding title bar, border, scrollbars, etc.
GetClientSizeTuple() -> (width, height)
This gets the size of the window’s ‘client area’ in pixels. The client area is the area which may be drawn on by the programmer, excluding title bar, border, scrollbars, etc.
GetConstraints(self) -> LayoutConstraints
Returns a pointer to the window’s layout constraints, or None if there are none.
GetContainingSizer(self) -> Sizer
Return the sizer that this window is a member of, if any, otherwise None.
GetCursor(self) -> Cursor
Return the cursor associated with this window.
GetDefaultAttributes(self) -> VisualAttributes
Get the default attributes for an instance of this class. This is useful if you want to use the same font or colour in your own control as in a standard control – which is a much better idea than hard coding specific colours or fonts which might look completely out of place on the user’s system, especially if it uses themes.
GetDefaultItem(self) -> Window
Get the default child of this parent, i.e. the one which is activated by pressing <Enter> such as the OK button on a wx.Dialog.
GetDropTarget(self) -> DropTarget
Returns the associated drop target, which may be None.
GetEffectiveMinSize(self) -> Size
This function will merge the window’s best size into the window’s minimum size, giving priority to the min size components, and returns the results.
GetEventHandler(self) -> EvtHandler
Returns the event handler for this window. By default, the window is its own event handler.
GetEvtHandlerEnabled(self) -> bool
GetExtraStyle(self) -> long
Returns the extra style bits for the window.
GetFont(self) -> Font
Returns the default font used for this window.
GetForegroundColour(self) -> Colour
Returns the foreground colour of the window. The interpretation of foreground colour is dependent on the window class; it may be the text colour or other colour, or it may not be used at all.
Get the width, height, decent and leading of the text using the current or specified font.
GetGrandParent(self) -> Window
Returns the parent of the parent of this window, or None if there isn’t one.
GetGtkWidget(self) -> long
On wxGTK returns a pointer to the GtkWidget for this window as a long integer. On the other platforms this method returns zero.
GetHandle(self) -> long
Returns the platform-specific handle (as a long integer) of the physical window. On wxMSW this is the win32 window handle, on wxGTK it is the XWindow ID, and on wxMac it is the ControlRef.
GetHelpText(self) -> String
Gets the help text to be used as context-sensitive help for this window. Note that the text is actually stored by the current wx.HelpProvider implementation, and not in the window object itself.
GetHelpTextAtPoint(self, Point pt, wxHelpEvent::Origin origin) -> String
Get the help string associated with the given position in this window.
Notice that pt may be invalid if event origin is keyboard or unknown and this method should return the global window help text then
GetIcon(self) -> Icon
GetId(self) -> int
Returns the identifier of the window. Each window has an integer identifier. If the application has not provided one (or the default Id -1 is used) then an unique identifier with a negative value will be generated.
GetLabel(self) -> String
Generic way of getting a label from any window, for identification purposes. The interpretation of this function differs from class to class. For frames and dialogs, the value returned is the title. For buttons or static text controls, it is the button text. This function can be useful for meta-programs such as testing tools or special-needs access programs)which need to identify windows by name.
GetLayoutDirection(self) -> int
Get the layout direction (LTR or RTL) for this window. Returns wx.Layout_Default if layout direction is not supported.
GetMaxHeight(self) -> int
GetMaxSize(self) -> Size
GetMaxWidth(self) -> int
GetMenuBar(self) -> MenuBar
GetMinHeight(self) -> int
GetMinSize(self) -> Size
GetMinWidth(self) -> int
GetName(self) -> String
Returns the windows name. This name is not guaranteed to be unique; it is up to the programmer to supply an appropriate name in the window constructor or via wx.Window.SetName.
GetNextHandler(self) -> EvtHandler
GetParent(self) -> Window
Returns the parent window of this window, or None if there isn’t one.
GetPosition(self) -> Point
Get the window’s position. Notice that the position is in client coordinates for child windows and screen coordinates for the top level ones, use GetScreenPosition if you need screen coordinates for all kinds of windows.
GetPositionTuple() -> (x,y)
Get the window’s position. Notice that the position is in client coordinates for child windows and screen coordinates for the top level ones, use GetScreenPosition if you need screen coordinates for all kinds of windows.
GetPreviousHandler(self) -> EvtHandler
GetRect(self) -> Rect
Returns the size and position of the window as a wx.Rect object.
GetScreenPosition(self) -> Point
Get the position of the window in screen coordinantes.
GetScreenPositionTuple() -> (x,y)
Get the position of the window in screen coordinantes.
GetScreenRect(self) -> Rect
Returns the size and position of the window in screen coordinantes as a wx.Rect object.
GetScrollPos(self, int orientation) -> int
Returns the built-in scrollbar position.
GetScrollRange(self, int orientation) -> int
Returns the built-in scrollbar range.
GetScrollThumb(self, int orientation) -> int
Returns the built-in scrollbar thumb size.
GetSize(self) -> Size
Get the window size.
GetSizeTuple() -> (width, height)
Get the window size.
GetSizer(self) -> Sizer
Return the sizer associated with the window by a previous call to SetSizer or None if there isn’t one.
GetStatusBar(self) -> StatusBar
GetStatusBarPane(self) -> int
GetTextExtent(String string) -> (width, height)
Get the width and height of the text using the current font.
GetThemeEnabled(self) -> bool
Return the themeEnabled flag.
GetTitle(self) -> String
GetTmpDefaultItem(self) -> Window
Return the temporary default item, which can be None.
GetToolBar(self) -> wxToolBar
GetToolTip(self) -> ToolTip
get the associated tooltip or None if none
GetTopLevelParent(self) -> Window
Returns the first frame or dialog in this window’s parental hierarchy.
GetUpdateClientRect(self) -> Rect
Get the update rectangle region bounding box in client coords.
GetUpdateRegion(self) -> Region
Returns the region specifying which parts of the window have been damaged. Should only be called within an EVT_PAINT handler.
GetValidator(self) -> Validator
Returns a pointer to the current validator for the window, or None if there is none.
GetVirtualSize(self) -> Size
Get the the virtual size of the window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
GetVirtualSizeTuple() -> (width, height)
Get the the virtual size of the window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
GetWindowBorderSize(self) -> Size
Return the size of the left/right and top/bottom borders.
GetWindowStyleFlag(self) -> long
Gets the window style that was passed to the constructor or Create method.
GetWindowStyleFlag(self) -> long
Gets the window style that was passed to the constructor or Create method.
GetWindowVariant(self) -> int
See GetGrandParent
GetGtkWidget(self) -> long
On wxGTK returns a pointer to the GtkWidget for this window as a long integer. On the other platforms this method returns zero.
See GetHandle
HasCapture(self) -> bool
Returns true if this window has the current mouse capture.
HasFlag(self, int flag) -> bool
Test if the given style is set for this window.
HasMultiplePages(self) -> bool
HasScrollbar(self, int orient) -> bool
Does the window have the scrollbar for this orientation?
HasTransparentBackground(self) -> bool
Returns True if this window’s background is transparent (as, for example, for wx.StaticText) and should show the parent window’s background.
This method is mostly used internally by the library itself and you normally shouldn’t have to call it. You may, however, have to override it in your custom control classes to ensure that background is painted correctly.
See GetHelpText and SetHelpText
Hide(self) -> bool
Equivalent to calling Show(False).
HitTest(self, Point pt) -> int
Test where the given (in client coords) point lies
HitTestXY(self, int x, int y) -> int
Test where the given (in client coords) point lies
See GetIcon and SetIcon
Iconize(self, bool iconize=True)
See GetId and SetId
InheritAttributes(self)
This function is (or should be, in case of custom controls) called during window creation to intelligently set up the window visual attributes, that is the font and the foreground and background colours.
By ‘intelligently’ the following is meant: by default, all windows use their own default attributes. However if some of the parent’s attributes are explicitly changed (that is, using SetFont and not SetOwnFont) and if the corresponding attribute hadn’t been explicitly set for this window itself, then this window takes the same value as used by the parent. In addition, if the window overrides ShouldInheritColours to return false, the colours will not be changed no matter what and only the font might.
This rather complicated logic is necessary in order to accommodate the different usage scenarios. The most common one is when all default attributes are used and in this case, nothing should be inherited as in modern GUIs different controls use different fonts (and colours) than their siblings so they can’t inherit the same value from the parent. However it was also deemed desirable to allow to simply change the attributes of all children at once by just changing the font or colour of their common parent, hence in this case we do inherit the parents attributes.
InheritsBackgroundColour(self) -> bool
InitDialog(self)
Sends an EVT_INIT_DIALOG event, whose handler usually transfers data to the dialog via validators.
InvalidateBestSize(self)
Reset the cached best size value so it will be recalculated the next time it is needed.
IsActive(self) -> bool
IsAlwaysMaximized(self) -> bool
IsBeingDeleted(self) -> bool
Is the window in the process of being deleted?
IsDoubleBuffered(self) -> bool
Returns True if the window contents is double-buffered by the system, i.e. if any drawing done on the window is really done on a temporary backing surface and transferred to the screen all at once later.
IsEnabled(self) -> bool
Returns true if the window is enabled for input, false otherwise.
IsExposed(self, int x, int y, int w=1, int h=1) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsExposedPoint(self, Point pt) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsExposedRect(self, Rect rect) -> bool
Returns true if the given point or rectangle area has been exposed since the last repaint. Call this in an paint event handler to optimize redrawing by only redrawing those areas, which have been exposed.
IsFrozen(self) -> bool
Returns True if the window has been frozen and not thawed yet.
| See : | Freeze and Thaw |
|---|
IsFullScreen(self) -> bool
IsIconized(self) -> bool
IsMaximized(self) -> bool
IsRetained(self) -> bool
Returns true if the window is retained, false otherwise. Retained windows are only available on X platforms.
IsSameAs(self, Object p) -> bool
For wx.Objects that use C++ reference counting internally, this method can be used to determine if two objects are referencing the same data object.
IsShown(self) -> bool
Returns true if the window is shown, false if it has been hidden.
IsShownOnScreen(self) -> bool
Returns True if the window is physically visible on the screen, i.e. it is shown and all its parents up to the toplevel window are shown as well.
IsTopLevel(self) -> bool
Returns true if the given window is a top-level one. Currently all frames and dialogs are always considered to be top-level windows (even if they have a parent window).
See GetLabel and SetLabel
Layout(self) -> bool
Invokes the constraint-based layout algorithm or the sizer-based algorithm for this window. See SetAutoLayout: when auto layout is on, this function gets called automatically by the default EVT_SIZE handler when the window is resized.
See GetLayoutDirection and SetLayoutDirection
LineDown(self) -> bool
This is just a wrapper for ScrollLines(1).
LineUp(self) -> bool
This is just a wrapper for ScrollLines(-1).
Lower(self)
Lowers the window to the bottom of the window hierarchy. In current version of wxWidgets this works both for managed and child windows.
MacGetMetalAppearance(self) -> bool
MacGetTopLevelWindowRef(self) -> long
MacGetUnifiedAppearance(self) -> bool
MacSetMetalAppearance(self, bool on)
MakeModal(self, bool modal=True)
Disables all other windows in the application so that the user can only interact with this window. Passing False will reverse this effect.
See GetMaxHeight
See GetMaxSize and SetMaxSize
See GetMaxWidth
Maximize(self, bool maximize=True)
See GetMenuBar and SetMenuBar
See GetMinHeight
See GetMinSize and SetMinSize
See GetMinWidth
Move(self, Point pt, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
MoveAfterInTabOrder(self, Window win)
Moves this window in the tab navigation order after the specified sibling window. This means that when the user presses the TAB key on that other window, the focus switches to this window.
The default tab order is the same as creation order. This function and MoveBeforeInTabOrder allow to change it after creating all the windows.
MoveBeforeInTabOrder(self, Window win)
Same as MoveAfterInTabOrder except that it inserts this window just before win instead of putting it right after it.
MoveXY(self, int x, int y, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
See GetName and SetName
Navigate(self, int flags=NavigationKeyEvent.IsForward) -> bool
Does keyboard navigation from this window to another, by sending a wx.NavigationKeyEvent.
NewControlId() -> int
Generate a control id for the controls which were not given one.
NextControlId(int winid) -> int
Get the id of the control following the one with the given autogenerated) id
See GetNextHandler and SetNextHandler
OnPaint(self, PaintEvent event)
PageDown(self) -> bool
This is just a wrapper for ScrollPages(1).
PageUp(self) -> bool
This is just a wrapper for ScrollPages(-1).
See GetParent
PopEventHandler(self, bool deleteHandler=False) -> EvtHandler
Removes and returns the top-most event handler on the event handler stack. If deleteHandler is True then the wx.EvtHandler object will be destroyed after it is popped, and None will be returned instead.
PopStatusText(self, int number=0)
PopupMenu(self, Menu menu, Point pos=DefaultPosition) -> bool
Pops up the given menu at the specified coordinates, relative to this window, and returns control when the user has dismissed the menu. If a menu item is selected, the corresponding menu event is generated and will be processed as usual. If the default position is given then the current position of the mouse cursor will be used.
PopupMenuXY(self, Menu menu, int x=-1, int y=-1) -> bool
Pops up the given menu at the specified coordinates, relative to this window, and returns control when the user has dismissed the menu. If a menu item is selected, the corresponding menu event is generated and will be processed as usual. If the default position is given then the current position of the mouse cursor will be used.
See GetPosition and SetPosition
Phase 3 of the 2-phase create <wink!> Call this method after precreating the window with the 2-phase create method.
PrepareDC(self, DC dc)
Call this function to prepare the device context for drawing a scrolled image. It sets the device origin according to the current scroll position.
PrevControlId(int winid) -> int
Get the id of the control preceding the one with the given autogenerated) id
See GetPreviousHandler and SetPreviousHandler
ProcessCommand(self, int winid) -> bool
ProcessEvent(self, Event event) -> bool
ProcessPendingEvents(self)
PushEventHandler(self, EvtHandler handler)
Pushes this event handler onto the event handler stack for the window. An event handler is an object that is capable of processing the events sent to a window. (In other words, is able to dispatch the events to a handler function.) By default, the window is its own event handler, but an application may wish to substitute another, for example to allow central implementation of event-handling for a variety of different window classes.
wx.Window.PushEventHandler allows an application to set up a chain of event handlers, where an event not handled by one event handler is handed to the next one in the chain. Use wx.Window.PopEventHandler to remove the event handler. Ownership of the handler is not given to the window, so you should be sure to pop the handler before the window is destroyed and either let PopEventHandler destroy it, or call its Destroy method yourself.
PushStatusText(self, String text, int number=0)
Raise(self)
Raises the window to the top of the window hierarchy. In current version of wxWidgets this works both for managed and child windows.
See GetRect and SetRect
Refresh(self, bool eraseBackground=True, Rect rect=None)
Mark the specified rectangle (or the whole window) as “dirty” so it will be repainted. Causes an EVT_PAINT event to be generated and sent to the window.
RefreshRect(self, Rect rect, bool eraseBackground=True)
Redraws the contents of the given rectangle: the area inside it will be repainted. This is the same as Refresh but has a nicer syntax.
RegisterHotKey(self, int hotkeyId, int modifiers, int keycode) -> bool
Registers a system wide hotkey. Every time the user presses the hotkey registered here, this window will receive a hotkey event. It will receive the event even if the application is in the background and does not have the input focus because the user is working with some other application. To bind an event handler function to this hotkey use EVT_HOTKEY with an id equal to hotkeyId. Returns True if the hotkey was registered successfully.
ReleaseMouse(self)
Releases mouse input captured with wx.Window.CaptureMouse.
RemoveChild(self, Window child)
Removes a child window. This is called automatically by window deletion functions so should not be required by the application programmer.
RemoveEventHandler(self, EvtHandler handler) -> bool
Find the given handler in the event handler chain and remove (but not delete) it from the event handler chain, returns True if it was found and False otherwise (this also results in an assert failure so this function should only be called when the handler is supposed to be there.)
Reparent(self, Window newParent) -> bool
Reparents the window, i.e the window will be removed from its current parent window (e.g. a non-standard toolbar in a wxFrame) and then re-inserted into another. Available on Windows and GTK. Returns True if the parent was changed, False otherwise (error or newParent == oldParent)
RequestUserAttention(self, int flags=USER_ATTENTION_INFO)
Restore(self)
See GetScreenPosition
See GetScreenRect
ScreenToClient(self, Point pt) -> Point
Converts from screen to client window coordinates.
ScreenToClientXY(int x, int y) -> (x,y)
Converts from screen to client window coordinates.
ScrollLines(self, int lines) -> bool
If the platform and window class supports it, scrolls the window by the given number of lines down, if lines is positive, or up if lines is negative. Returns True if the window was scrolled, False if it was already on top/bottom and nothing was done.
ScrollPages(self, int pages) -> bool
If the platform and window class supports it, scrolls the window by the given number of pages down, if pages is positive, or up if pages is negative. Returns True if the window was scrolled, False if it was already on top/bottom and nothing was done.
ScrollWindow(self, int dx, int dy, Rect rect=None)
Physically scrolls the pixels in the window and move child windows accordingly. Use this function to optimise your scrolling implementations, to minimise the area that must be redrawn. Note that it is rarely required to call this function from a user program.
SendSizeEvent(self)
SetAcceleratorTable(self, AcceleratorTable accel)
Sets the accelerator table for this window.
SetAutoLayout(self, bool autoLayout)
Determines whether the Layout function will be called automatically when the window is resized. lease note that this only happens for the windows usually used to contain children, namely wx.Panel and wx.TopLevelWindow (and the classes deriving from them).
This method is called implicitly by SetSizer but if you use SetConstraints you should call it manually or otherwise the window layout won’t be correctly updated when its size changes.
SetBackgroundColour(self, Colour colour) -> bool
Sets the background colour of the window. Returns True if the colour was changed. The background colour is usually painted by the default EVT_ERASE_BACKGROUND event handler function under Windows and automatically under GTK. Using wx.NullColour will reset the window to the default background colour.
Note that setting the background colour may not cause an immediate refresh, so you may wish to call ClearBackground or Refresh after calling this function.
Using this function will disable attempts to use themes for this window, if the system supports them. Use with care since usually the themes represent the appearance chosen by the user to be used for all applications on the system.
SetBackgroundStyle(self, int style) -> bool
Returns the background style of the window. The background style indicates how the background of the window is drawn.
wx.BG_STYLE_SYSTEM The background colour or pattern should be determined by the system wx.BG_STYLE_COLOUR The background should be a solid colour wx.BG_STYLE_CUSTOM The background will be implemented by the application.
On GTK+, use of wx.BG_STYLE_CUSTOM allows the flicker-free drawing of a custom background, such as a tiled bitmap. Currently the style has no effect on other platforms.
| See : | GetBackgroundStyle, SetBackgroundColour |
|---|
Use SetInitialSize
SetCaret(self, Caret caret)
Sets the caret associated with the window.
SetClientRect(self, Rect rect)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetClientSize(self, Size size)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetClientSizeWH(self, int width, int height)
This sets the size of the window client area in pixels. Using this function to size a window tends to be more device-independent than wx.Window.SetSize, since the application need not worry about what dimensions the border or title bar have when trying to fit the window around panel items, for example.
SetConstraints(self, LayoutConstraints constraints)
Sets the window to have the given layout constraints. If an existing layout constraints object is already owned by the window, it will be deleted. Pass None to disassociate and delete the window’s current constraints.
You must call SetAutoLayout to tell a window to use the constraints automatically in its default EVT_SIZE handler; otherwise, you must handle EVT_SIZE yourself and call Layout() explicitly. When setting both a wx.LayoutConstraints and a wx.Sizer, only the sizer will have effect.
SetContainingSizer(self, Sizer sizer)
This normally does not need to be called by application code. It is called internally when a window is added to a sizer, and is used so the window can remove itself from the sizer when it is destroyed.
SetCursor(self, Cursor cursor) -> bool
Sets the window’s cursor. Notice that the window cursor also sets it for the children of the window implicitly.
The cursor may be wx.NullCursor in which case the window cursor will be reset back to default.
SetDefaultItem(self, Window child) -> Window
Set this child as default, return the old default.
SetDimensions(self, int x, int y, int width, int height, int sizeFlags=SIZE_AUTO)
Sets the position and size of the window in pixels. The sizeFlags parameter indicates the interpretation of the other params if they are equal to -1.
wx.SIZE_AUTO A -1 indicates that a class-specific default should be used. wx.SIZE_USE_EXISTING Existing dimensions should be used if -1 values are supplied. wxSIZE_ALLOW_MINUS_ONE Allow dimensions of -1 and less to be interpreted as real dimensions, not default values.
SetDoubleBuffered(self, bool on)
Put the native window into double buffered or composited mode.
SetDropTarget(self, DropTarget dropTarget)
Associates a drop target with this window. If the window already has a drop target, it is deleted.
SetEventHandler(self, EvtHandler handler)
Sets the event handler for this window. An event handler is an object that is capable of processing the events sent to a window. (In other words, is able to dispatch the events to handler function.) By default, the window is its own event handler, but an application may wish to substitute another, for example to allow central implementation of event-handling for a variety of different window classes.
It is usually better to use wx.Window.PushEventHandler since this sets up a chain of event handlers, where an event not handled by one event handler is handed off to the next one in the chain.
SetEvtHandlerEnabled(self, bool enabled)
SetExtraStyle(self, long exStyle)
Sets the extra style bits for the window. Extra styles are the less often used style bits which can’t be set with the constructor or with SetWindowStyleFlag()
SetFocus(self)
Set’s the focus to this window, allowing it to receive keyboard input.
SetFocusFromKbd(self)
Set focus to this window as the result of a keyboard action. Normally only called internally.
SetFont(self, Font font) -> bool
Sets the font for this window.
SetForegroundColour(self, Colour colour) -> bool
Sets the foreground colour of the window. Returns True is the colour was changed. The interpretation of foreground colour is dependent on the window class; it may be the text colour or other colour, or it may not be used at all.
SetHelpText(self, String text)
Sets the help text to be used as context-sensitive help for this window. Note that the text is actually stored by the current wx.HelpProvider implementation, and not in the window object itself.
SetHelpTextForId(self, String text)
Associate this help text with all windows with the same id as this one.
SetIcon(self, Icon icon)
SetIcons(self, wxIconBundle icons)
SetId(self, int winid)
Sets the identifier of the window. Each window has an integer identifier. If the application has not provided one, an identifier will be generated. Normally, the identifier should be provided on creation and should not be modified subsequently.
SetInitialSize(self, Size size=DefaultSize)
A ‘Smart’ SetSize that will fill in default size components with the window’s best size values. Also set’s the minsize for use with sizers.
SetLabel(self, String label)
Set the text which the window shows in its label if applicable.
SetLayoutDirection(self, int dir)
Set the layout direction (LTR or RTL) for this window.
SetMaxSize(self, Size maxSize)
A more convenient method than SetSizeHints for setting just the max size.
SetMenuBar(self, MenuBar menubar)
SetMinSize(self, Size minSize)
A more convenient method than SetSizeHints for setting just the min size.
SetName(self, String name)
Sets the window’s name. The window name is used for ressource setting in X, it is not the same as the window title/label
SetNextHandler(self, EvtHandler handler)
SetOwnBackgroundColour(self, Colour colour)
SetOwnFont(self, Font font)
SetOwnForegroundColour(self, Colour colour)
Move(self, Point pt, int flags=SIZE_USE_EXISTING)
Moves the window to the given position.
SetPreviousHandler(self, EvtHandler handler)
SetRect(self, Rect rect, int sizeFlags=SIZE_AUTO)
Sets the position and size of the window in pixels using a wx.Rect.
SetScrollPos(self, int orientation, int pos, bool refresh=True)
Sets the position of one of the built-in scrollbars.
Sets the scrollbar properties of a built-in scrollbar.
SetShape(self, Region region) -> bool
SetSize(self, Size size)
Sets the size of the window in pixels.
Allows specification of minimum and maximum window sizes, and window size increments. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the window outside the given bounds (if it is a top-level window.) Sizers will also inspect the minimum window size and will use that value if set when calculating layout.
The resizing increments are only significant under Motif or Xt.
SetSizeHintsSz(self, Size minSize, Size maxSize=DefaultSize, Size incSize=DefaultSize)
Allows specification of minimum and maximum window sizes, and window size increments. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the window outside the given bounds (if it is a top-level window.) Sizers will also inspect the minimum window size and will use that value if set when calculating layout.
The resizing increments are only significant under Motif or Xt.
SetSizeWH(self, int width, int height)
Sets the size of the window in pixels.
SetSizer(self, Sizer sizer, bool deleteOld=True)
Sets the window to have the given layout sizer. The window will then own the object, and will take care of its deletion. If an existing layout sizer object is already owned by the window, it will be deleted if the deleteOld parameter is true. Note that this function will also call SetAutoLayout implicitly with a True parameter if the sizer is non-None, and False otherwise.
SetSizerAndFit(self, Sizer sizer, bool deleteOld=True)
The same as SetSizer, except it also sets the size hints for the window based on the sizer’s minimum size.
SetStatusBar(self, StatusBar statBar)
SetStatusBarPane(self, int n)
SetStatusText(self, String text, int number=0)
SetStatusWidths(self, int widths)
SetThemeEnabled(self, bool enableTheme)
Dialogs, notebook pages and the status bar have this flag set to true by default so that the default look and feel is simulated best.
SetTitle(self, String title)
SetTmpDefaultItem(self, Window win)
Set this child as temporary default
SetToolBar(self, wxToolBar toolbar)
SetToolTip(self, ToolTip tip)
Attach a tooltip to the window.
SetToolTipString(self, String tip)
Attach a tooltip to the window.
SetTransparent(self, byte alpha) -> bool
Attempt to set the transparency of this window to the alpha value, returns True on success. The alpha value is an integer in the range of 0 to 255, where 0 is fully transparent and 255 is fully opaque.
SetValidator(self, Validator validator)
Deletes the current validator (if any) and sets the window validator, having called wx.Validator.Clone to create a new validator of this type.
SetVirtualSize(self, Size size)
Set the the virtual size of a window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
SetVirtualSizeHints(self, int minW, int minH, int maxW=-1, int maxH=-1)
Allows specification of minimum and maximum virtual window sizes. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the virtual area of the window outside the given bounds.
SetVirtualSizeHintsSz(self, Size minSize, Size maxSize=DefaultSize)
Allows specification of minimum and maximum virtual window sizes. If a pair of values is not set (or set to -1), the default values will be used. If this function is called, the user will not be able to size the virtual area of the window outside the given bounds.
SetVirtualSizeWH(self, int w, int h)
Set the the virtual size of a window in pixels. For most windows this is just the client area of the window, but for some like scrolled windows it is more or less independent of the screen window size.
SetWindowStyleFlag(self, long style)
Sets the style of the window. Please note that some styles cannot be changed after the window creation and that Refresh() might need to be called after changing the others for the change to take place immediately.
SetWindowStyleFlag(self, long style)
Sets the style of the window. Please note that some styles cannot be changed after the window creation and that Refresh() might need to be called after changing the others for the change to take place immediately.
SetWindowVariant(self, int variant)
Sets the variant of the window/font size to use for this window, if the platform supports variants, for example, wxMac.
ShouldInheritColours(self) -> bool
Return true from here to allow the colours of this window to be changed by InheritAttributes, returning false forbids inheriting them from the parent window.
The base class version returns false, but this method is overridden in wxControl where it returns true.
Show(self, bool show=True) -> bool
Shows or hides the window. You may need to call Raise for a top level window if you want to bring it to top, although this is not needed if Show is called immediately after the frame creation. Returns True if the window has been shown or hidden or False if nothing was done because it already was in the requested state.
ShowFullScreen(self, bool show, long style=FULLSCREEN_ALL) -> bool
See IsShown and Show
See GetSize and SetSize
See GetSizer and SetSizer
See GetStatusBar and SetStatusBar
See GetStatusBarPane and SetStatusBarPane
Thaw(self)
Reenables window updating after a previous call to Freeze. Calls to Freeze/Thaw may be nested, so Thaw must be called the same number of times that Freeze was before the window will be updated.
See GetThemeEnabled and SetThemeEnabled
See GetTitle and SetTitle
See GetTmpDefaultItem and SetTmpDefaultItem
ToggleWindowStyle(self, int flag) -> bool
Turn the flag on if it had been turned off before and vice versa, returns True if the flag is turned on by this function call.
See GetToolBar and SetToolBar
See GetToolTip and SetToolTip
See IsTopLevel
See GetTopLevelParent
TransferDataFromWindow(self) -> bool
Transfers values from child controls to data areas specified by their validators. Returns false if a transfer failed. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call TransferDataFromWindow() of all child windows.
TransferDataToWindow(self) -> bool
Transfers values to child controls from data areas specified by their validators. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call TransferDataToWindow() of all child windows.
Disconnects the event handler binding for event from self. Returns True if successful.
UnregisterHotKey(self, int hotkeyId) -> bool
Unregisters a system wide hotkey.
Update(self)
Calling this method immediately repaints the invalidated area of the window instead of waiting for the EVT_PAINT event to happen, (normally this would usually only happen when the flow of control returns to the event loop.) Notice that this function doesn’t refresh the window and does nothing if the window has been already repainted. Use Refresh first if you want to immediately redraw the window (or some portion of it) unconditionally.
See GetUpdateClientRect
See GetUpdateRegion
UpdateWindowUI(self, long flags=UPDATE_UI_NONE)
This function sends EVT_UPDATE_UI events to the window. The particular implementation depends on the window; for example a wx.ToolBar will send an update UI event for each toolbar button, and a wx.Frame will send an update UI event for each menubar menu item. You can call this function from your application to ensure that your UI is up-to-date at a particular point in time (as far as your EVT_UPDATE_UI handlers are concerned). This may be necessary if you have called wx.UpdateUIEvent.SetMode or wx.UpdateUIEvent.SetUpdateInterval to limit the overhead that wxWindows incurs by sending update UI events in idle time.
UseBgCol(self) -> bool
Validate(self) -> bool
Validates the current values of the child controls using their validators. If the window has wx.WS_EX_VALIDATE_RECURSIVELY extra style flag set, the method will also call Validate() of all child windows. Returns false if any of the validations failed.
See GetValidator and SetValidator
See GetVirtualSize and SetVirtualSize
WarpPointer(self, int x, int y)
Moves the pointer to the given position on the window.
NOTE: This function is not supported under Mac because Apple Human Interface Guidelines forbid moving the mouse cursor programmatically.
See GetWindowStyle and SetWindowStyle
See GetWindowStyleFlag and SetWindowStyleFlag
WindowToClientSize(self, Size size) -> Size
See GetWindowVariant and SetWindowVariant
The membership flag
Bases: wx._core.App
IsActive(self) -> bool
Return True if our app has focus.
AddPendingEvent(self, Event event)
See GetAppName and SetAppName
See GetAssertMode and SetAssertMode
Bind an event to an event handler.
| Parameters: |
|
|---|
See GetClassName and SetClassName
Connect(self, int id, int lastId, int eventType, PyObject func)
Dispatch(self) -> bool
Process the first event in the event queue (blocks until an event appears if there are none currently)
See GetEvtHandlerEnabled and SetEvtHandlerEnabled
Exit(self)
Exit the main loop thus terminating the application. :see: wx.Exit
ExitMainLoop(self)
Exit the main GUI loop during the next iteration of the main loop, (i.e. it does not stop the program immediately!)
See GetExitOnFrameDelete and SetExitOnFrameDelete
FilterEvent(self, Event event) -> int
Filters all events. SetCallFilterEvent controls whether or not your override is called.
GetAppName(self) -> String
Get the application name.
GetAssertMode(self) -> int
Get the current OnAssert behaviour setting.
GetCallFilterEvent(self) -> bool
Returns the state of the Call FilterEvent flag.
GetClassName(self) -> String
Get the application’s class name.
GetComCtl32Version() -> int
Returns 400, 470, 471, etc. for comctl32.dll 4.00, 4.70, 4.71 or 0 if it wasn’t found at all. Raises an exception on non-Windows platforms.
GetEvtHandlerEnabled(self) -> bool
GetExitOnFrameDelete(self) -> bool
Get the current exit behaviour setting.
GetLayoutDirection(self) -> int
Return the layout direction for the current locale.
GetMacAboutMenuItemId() -> long
GetMacExitMenuItemId() -> long
GetMacHelpMenuTitleName() -> String
GetMacPreferencesMenuItemId() -> long
GetMacSupportPCMenuShortcuts() -> bool
GetNextHandler(self) -> EvtHandler
GetPreviousHandler(self) -> EvtHandler
GetPrintMode(self) -> int
GetTopWindow(self) -> Window
Return the main top level window (if it hadn’t been set previously with SetTopWindow(), will return just some top level window and, if there not any, will return None)
GetTraits(self) -> wxAppTraits
Return (and create if necessary) the app traits object to which we delegate for everything which either should be configurable by the user (then he can change the default behaviour simply by overriding CreateTraits() and returning his own traits object) or which is GUI/console dependent as then wx.AppTraits allows us to abstract the differences behind the common facade.
| Todo : | Add support for overriding CreateAppTraits in wxPython. |
|---|
GetUseBestVisual(self) -> bool
Get current UseBestVisual setting.
GetVendorName(self) -> String
Get the application’s vendor name.
IsActive(self) -> bool
Return True if our app has focus.
IsDisplayAvailable() -> bool
Tests if it is possible to create a GUI in the current environment. This will mean different things on the different platforms.
- On X Windows systems this function will return False if it is not able to open a connection to the X display, which can happen if $DISPLAY is not set, or is not set correctly.
- On Mac OS X a False return value will mean that wx is not able to access the window manager, which can happen if logged in remotely or if running from the normal version of python instead of the framework version, (i.e., pythonw.)
- On MS Windows...
IsMainLoopRunning() -> bool
Returns True if we’re running the main loop, i.e. if the events can currently be dispatched.
IsSameAs(self, Object p) -> bool
For wx.Objects that use C++ reference counting internally, this method can be used to determine if two objects are referencing the same data object.
See GetLayoutDirection
MacHideApp(self)
Hide all application windows just as the user can do with the system Hide command. Mac only.
MacRequestUserAttention(self, int ?)
Execute the main GUI event loop
See GetNextHandler and SetNextHandler
Things that must be done after _BootstrapApp has done its thing, but would be nice if they were already done by the time that OnInit is called.
Pending(self) -> bool
Returns True if there are unprocessed events in the event queue.
See GetPreviousHandler and SetPreviousHandler
See GetPrintMode and SetPrintMode
ProcessEvent(self, Event event) -> bool
ProcessIdle(self) -> bool
Called from the MainLoop when the application becomes idle (there are no pending events) and sends a wx.IdleEvent to all interested parties. Returns True if more idle events are needed, False if not.
ProcessPendingEvents(self)
Process all events in the Pending Events list – it is necessary to call this function to process posted events. This normally happens during each event loop iteration.
Redirect sys.stdout and sys.stderr to a file or a popup window.
SendIdleEvents(self, Window win, IdleEvent event) -> bool
Send idle event to window and all subwindows. Returns True if more idle time is requested.
SetAppName(self, String name)
Set the application name. This value may be used automatically by wx.Config and such.
SetAssertMode(self, int mode)
Set the OnAssert behaviour for debug and hybrid builds.
SetCallFilterEvent(self, bool callFilterEvent=True)
Set the Call FilterEvent flag. When set your override of FilterEvent will be called. SetCallFilterEvent’s purpose is to avoid any performance penalty when you have overriden FilterEvent, but don’t want it to be called, and also to reduce the runtime overhead when it is not overridden.
SetClassName(self, String name)
Set the application’s class name. This value may be used for X-resources if applicable for the platform
SetEvtHandlerEnabled(self, bool enabled)
SetExitOnFrameDelete(self, bool flag)
Control the exit behaviour: by default, the program will exit the main loop (and so, usually, terminate) when the last top-level program window is deleted. Beware that if you disable this behaviour (with SetExitOnFrameDelete(False)), you’ll have to call ExitMainLoop() explicitly from somewhere.
SetMacAboutMenuItemId(long val)
SetMacExitMenuItemId(long val)
SetMacHelpMenuTitleName(String val)
SetMacPreferencesMenuItemId(long val)
SetMacSupportPCMenuShortcuts(bool val)
SetNextHandler(self, EvtHandler handler)
Set the title, position and/or size of the output window if the stdio has been redirected. This should be called before any output would cause the output window to be created.
SetPreviousHandler(self, EvtHandler handler)
SetPrintMode(self, int mode)
Set the “main” top level window
SetUseBestVisual(self, bool flag, bool forceTrueColour=False)
Set whether the app should try to use the best available visual on systems where more than one is available, (Sun, SGI, XFree86 4, etc.)
SetVendorName(self, String name)
Set the application’s vendor name. This value may be used automatically by wx.Config and such.
See GetTopWindow and SetTopWindow
See GetTraits
Disconnects the event handler binding for event from self. Returns True if successful.
See GetUseBestVisual and SetUseBestVisual
See GetVendorName and SetVendorName
WakeUpIdle(self)
Make sure that idle events are sent again. :see: wx.WakeUpIdle
Yield(self, bool onlyIfNeeded=False) -> bool
Process all currently pending events right now, instead of waiting until return to the event loop. It is an error to call Yield recursively unless the value of onlyIfNeeded is True.
| Warning : | This function is dangerous as it can lead to unexpected reentrancies (i.e. when called from an event handler it may result in calling the same event handler again), use with extreme care or, better, don’t use at all! |
|---|---|
| See : | wx.Yield, wx.YieldIfNeeded, wx.SafeYield |
alias of PyOnDemandOutputWindow
The membership flag