pagestate.py @ 998ca90

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 998ca90 was 998ca90, checked in by krzywon, 8 years ago
#189 #12 Saving and loading project now fully saves and loads a simultaneous fits. Loading a project will reset Sasview state to its base state (with a warning). One error on load to fix before calling this finished.
Property mode set to `100644`
File size: 73.4 KB

Line
1	"""
2	Class that holds a fit page state
3	"""
4	# TODO: Refactor code so we don't need to use getattr/setattr
5	################################################################################
6	# This software was developed by the University of Tennessee as part of the
7	# Distributed Data Analysis of Neutron Scattering Experiments (DANSE)
8	# project funded by the US National Science Foundation.
9	#
10	# See the license text in license.txt
11	#
12	# copyright 2009, University of Tennessee
13	################################################################################
14	import time
15	import os
16	import sys
17	import wx
18	import copy
19	import logging
20	import numpy
21	import traceback
22
23	import xml.dom.minidom
24	from xml.dom.minidom import parseString
25	from lxml import etree
26
27	import sasmodels.weights
28
29	import sas.sascalc.dataloader
30	from sas.sascalc.dataloader.readers.cansas_reader import Reader as CansasReader
31	from sas.sascalc.dataloader.readers.cansas_reader import get_content, write_node
32	from sas.sascalc.dataloader.data_info import Data2D, Collimation, Detector
33	from sas.sascalc.dataloader.data_info import Process, Aperture
34	# Information to read/write state as xml
35	FITTING_NODE_NAME = 'fitting_plug_in'
36	CANSAS_NS = "cansas1d/1.0"
37
38	LIST_OF_DATA_ATTRIBUTES = [["is_data", "is_data", "bool"],
39	["group_id", "data_group_id", "string"],
40	["data_name", "data_name", "string"],
41	["data_id", "data_id", "string"],
42	["name", "name", "string"],
43	["data_name", "data_name", "string"]]
44	LIST_OF_STATE_ATTRIBUTES = [["qmin", "qmin", "float"],
45	["qmax", "qmax", "float"],
46	["npts", "npts", "float"],
47	["categorycombobox", "categorycombobox", "string"],
48	["formfactorcombobox", "formfactorcombobox", "string"],
49	["structurecombobox", "structurecombobox", "string"],
50	["multi_factor", "multi_factor", "float"],
51	["magnetic_on", "magnetic_on", "bool"],
52	["enable_smearer", "enable_smearer", "bool"],
53	["disable_smearer", "disable_smearer", "bool"],
54	["pinhole_smearer", "pinhole_smearer", "bool"],
55	["slit_smearer", "slit_smearer", "bool"],
56	["enable_disp", "enable_disp", "bool"],
57	["disable_disp", "disable_disp", "bool"],
58	["dI_noweight", "dI_noweight", "bool"],
59	["dI_didata", "dI_didata", "bool"],
60	["dI_sqrdata", "dI_sqrdata", "bool"],
61	["dI_idata", "dI_idata", "bool"],
62	["enable2D", "enable2D", "bool"],
63	["cb1", "cb1", "bool"],
64	["tcChi", "tcChi", "float"],
65	["smearer", "smearer", "float"],
66	["smear_type", "smear_type", "string"],
67	["dq_l", "dq_l", "string"],
68	["dq_r", "dq_r", "string"],
69	["dx_max", "dx_max", "float"],
70	["dx_min", "dx_min", "float"],
71	["dxl", "dxl", "float"],
72	["dxw", "dxw", "float"]]
73
74	LIST_OF_MODEL_ATTRIBUTES = [["values", "values"],
75	["weights", "weights"]]
76
77	DISPERSION_LIST = [["disp_obj_dict", "_disp_obj_dict", "string"]]
78
79	LIST_OF_STATE_PARAMETERS = [["parameters", "parameters"],
80	["str_parameters", "str_parameters"],
81	["orientation_parameters", "orientation_params"],
82	["dispersity_parameters", "orientation_params_disp"],
83	["fixed_param", "fixed_param"],
84	["fittable_param", "fittable_param"]]
85	LIST_OF_DATA_2D_ATTR = [["xmin", "xmin", "float"],
86	["xmax", "xmax", "float"],
87	["ymin", "ymin", "float"],
88	["ymax", "ymax", "float"],
89	["_xaxis", "_xaxis", "string"],
90	["_xunit", "_xunit", "string"],
91	["_yaxis", "_yaxis", "string"],
92	["_yunit", "_yunit", "string"],
93	["_zaxis", "_zaxis", "string"],
94	["_zunit", "_zunit", "string"]]
95	LIST_OF_DATA_2D_VALUES = [["qx_data", "qx_data", "float"],
96	["qy_data", "qy_data", "float"],
97	["dqx_data", "dqx_data", "float"],
98	["dqy_data", "dqy_data", "float"],
99	["data", "data", "float"],
100	["q_data", "q_data", "float"],
101	["err_data", "err_data", "float"],
102	["mask", "mask", "bool"]]
103
104
105	def parse_entry_helper(node, item):
106	"""
107	Create a numpy list from value extrated from the node
108
109	:param node: node from each the value is stored
110	:param item: list name of three strings.the two first are name of data
111	attribute and the third one is the type of the value of that
112	attribute. type can be string, float, bool, etc.
113
114	: return: numpy array
115	"""
116	if node is not None:
117	if item[2] == "string":
118	return str(node.get(item[0]).strip())
119	elif item[2] == "bool":
120	try:
121	return node.get(item[0]).strip() == "True"
122	except:
123	return None
124	else:
125	try:
126	return float(node.get(item[0]))
127	except:
128	return None
129
130
131	class PageState(object):
132	"""
133	Contains information to reconstruct a page of the fitpanel.
134	"""
135	def __init__(self, parent=None, model=None, data=None):
136	"""
137	Initialize the current state
138
139	:param model: a selected model within a page
140	:param data:
141
142	"""
143	self.file = None
144	# Time of state creation
145	self.timestamp = time.time()
146	# Data member to store the dispersion object created
147	self._disp_obj_dict = {}
148	# ------------------------
149	# Data used for fitting
150	self.data = data
151	# model data
152	self.theory_data = None
153	# Is 2D
154	self.is_2D = False
155	self.images = None
156
157	# save additional information on data that dataloader.reader
158	# does not read
159	self.is_data = None
160	self.data_name = ""
161
162	if self.data is not None:
163	self.data_name = self.data.name
164	self.data_id = None
165	if self.data is not None and hasattr(self.data, "id"):
166	self.data_id = self.data.id
167	self.data_group_id = None
168	if self.data is not None and hasattr(self.data, "group_id"):
169	self.data_group_id = self.data.group_id
170
171	# reset True change the state of existing button
172	self.reset = False
173
174	# flag to allow data2D plot
175	self.enable2D = False
176	# model on which the fit would be performed
177	self.model = model
178	self.m_name = None
179	# list of process done to model
180	self.process = []
181	# fit page manager
182	self.manager = None
183	# Store the parent of this panel parent
184	# For this application fitpanel is the parent
185	self.parent = parent
186	# Event_owner is the owner of model event
187	self.event_owner = None
188	# page name
189	self.page_name = ""
190	# Contains link between model, all its parameters, and panel organization
191	self.parameters = []
192	# String parameter list that can not be fitted
193	self.str_parameters = []
194	# Contains list of parameters that cannot be fitted and reference to
195	# panel objects
196	self.fixed_param = []
197	# Contains list of parameters with dispersity and reference to
198	# panel objects
199	self.fittable_param = []
200	# orientation parameters
201	self.orientation_params = []
202	# orientation parameters for gaussian dispersity
203	self.orientation_params_disp = []
204	# smearer info
205	self.smearer = None
206	self.smear_type = None
207	self.dq_l = None
208	self.dq_r = None
209	self.dx_max = None
210	self.dx_min = None
211	self.dxl = None
212	self.dxw = None
213	# list of dispersion parameters
214	self.disp_list = []
215	if self.model is not None:
216	self.disp_list = self.model.getDispParamList()
217
218	self.disp_cb_dict = {}
219	self.values = {}
220	self.weights = {}
221
222	# contains link between a model and selected parameters to fit
223	self.param_toFit = []
224	# dictionary of model type and model class
225	self.model_list_box = None
226	# save the state of the context menu
227	self.saved_states = {}
228	# save selection of combobox
229	self.formfactorcombobox = None
230	self.categorycombobox = None
231	self.structurecombobox = None
232
233	# radio box to select type of model
234	# self.shape_rbutton = False
235	# self.shape_indep_rbutton = False
236	# self.struct_rbutton = False
237	# self.plugin_rbutton = False
238	# the indice of the current selection
239	self.disp_box = 0
240	# Qrange
241	# Q range
242	self.qmin = 0.001
243	self.qmax = 0.1
244	# reset data range
245	self.qmax_x = None
246	self.qmin_x = None
247
248	self.npts = None
249	self.name = ""
250	self.multi_factor = None
251	self.magnetic_on = False
252	# enable smearering state
253	self.enable_smearer = False
254	self.disable_smearer = True
255	self.pinhole_smearer = False
256	self.slit_smearer = False
257	# weighting options
258	self.dI_noweight = False
259	self.dI_didata = True
260	self.dI_sqrdata = False
261	self.dI_idata = False
262	# disperity selection
263	self.enable_disp = False
264	self.disable_disp = True
265
266	# state of selected all check button
267	self.cb1 = False
268	# store value of chisqr
269	self.tcChi = None
270
271	def clone(self):
272	"""
273	Create a new copy of the current object
274	"""
275	model = None
276	if self.model is not None:
277	model = self.model.clone()
278	model.name = self.model.name
279	obj = PageState(self.parent, model=model)
280	obj.file = copy.deepcopy(self.file)
281	obj.data = copy.deepcopy(self.data)
282	if self.data is not None:
283	self.data_name = self.data.name
284	obj.data_name = self.data_name
285	obj.is_data = self.is_data
286	obj.model_list_box = copy.deepcopy(self.model_list_box)
287
288	obj.categorycombobox = self.categorycombobox
289	obj.formfactorcombobox = self.formfactorcombobox
290	obj.structurecombobox = self.structurecombobox
291
292	# obj.shape_rbutton = self.shape_rbutton
293	# obj.shape_indep_rbutton = self.shape_indep_rbutton
294	# obj.struct_rbutton = self.struct_rbutton
295	# obj.plugin_rbutton = self.plugin_rbutton
296
297	obj.manager = self.manager
298	obj.event_owner = self.event_owner
299	obj.disp_list = copy.deepcopy(self.disp_list)
300
301	obj.enable2D = copy.deepcopy(self.enable2D)
302	obj.parameters = copy.deepcopy(self.parameters)
303	obj.str_parameters = copy.deepcopy(self.str_parameters)
304	obj.fixed_param = copy.deepcopy(self.fixed_param)
305	obj.fittable_param = copy.deepcopy(self.fittable_param)
306	obj.orientation_params = copy.deepcopy(self.orientation_params)
307	obj.orientation_params_disp = copy.deepcopy(self.orientation_params_disp)
308	obj.enable_disp = copy.deepcopy(self.enable_disp)
309	obj.disable_disp = copy.deepcopy(self.disable_disp)
310	obj.tcChi = self.tcChi
311
312	if len(self._disp_obj_dict) > 0:
313	for k, v in self._disp_obj_dict.iteritems():
314	obj._disp_obj_dict[k] = v
315	if len(self.disp_cb_dict) > 0:
316	for k, v in self.disp_cb_dict.iteritems():
317	obj.disp_cb_dict[k] = v
318	if len(self.values) > 0:
319	for k, v in self.values.iteritems():
320	obj.values[k] = v
321	if len(self.weights) > 0:
322	for k, v in self.weights.iteritems():
323	obj.weights[k] = v
324	obj.enable_smearer = copy.deepcopy(self.enable_smearer)
325	obj.disable_smearer = copy.deepcopy(self.disable_smearer)
326	obj.pinhole_smearer = copy.deepcopy(self.pinhole_smearer)
327	obj.slit_smearer = copy.deepcopy(self.slit_smearer)
328	obj.smear_type = copy.deepcopy(self.smear_type)
329	obj.dI_noweight = copy.deepcopy(self.dI_noweight)
330	obj.dI_didata = copy.deepcopy(self.dI_didata)
331	obj.dI_sqrdata = copy.deepcopy(self.dI_sqrdata)
332	obj.dI_idata = copy.deepcopy(self.dI_idata)
333	obj.dq_l = copy.deepcopy(self.dq_l)
334	obj.dq_r = copy.deepcopy(self.dq_r)
335	obj.dx_max = copy.deepcopy(self.dx_max)
336	obj.dx_min = copy.deepcopy(self.dx_min)
337	obj.dxl = copy.deepcopy(self.dxl)
338	obj.dxw = copy.deepcopy(self.dxw)
339	obj.disp_box = copy.deepcopy(self.disp_box)
340	obj.qmin = copy.deepcopy(self.qmin)
341	obj.qmax = copy.deepcopy(self.qmax)
342	obj.multi_factor = self.multi_factor
343	obj.magnetic_on = self.magnetic_on
344	obj.npts = copy.deepcopy(self.npts)
345	obj.cb1 = copy.deepcopy(self.cb1)
346	obj.smearer = copy.deepcopy(self.smearer)
347
348	for name, state in self.saved_states.iteritems():
349	copy_name = copy.deepcopy(name)
350	copy_state = state.clone()
351	obj.saved_states[copy_name] = copy_state
352	return obj
353
354	def _repr_helper(self, list, rep):
355	"""
356	Helper method to print a state
357	"""
358	for item in list:
359	rep += "parameter name: %s \n" % str(item[1])
360	rep += "value: %s\n" % str(item[2])
361	rep += "selected: %s\n" % str(item[0])
362	rep += "error displayed : %s \n" % str(item[4][0])
363	rep += "error value:%s \n" % str(item[4][1])
364	rep += "minimum displayed : %s \n" % str(item[5][0])
365	rep += "minimum value : %s \n" % str(item[5][1])
366	rep += "maximum displayed : %s \n" % str(item[6][0])
367	rep += "maximum value : %s \n" % str(item[6][1])
368	rep += "parameter unit: %s\n\n" % str(item[7])
369	return rep
370
371	def __repr__(self):
372	"""
373	output string for printing
374	"""
375	rep = "\nState name: %s\n" % self.file
376	t = time.localtime(self.timestamp)
377	time_str = time.strftime("%b %d %Y %H;%M;%S ", t)
378
379	rep += "State created: %s\n" % time_str
380	rep += "State form factor combobox selection: %s\n" % \
381	self.formfactorcombobox
382	rep += "State structure factor combobox selection: %s\n" % \
383	self.structurecombobox
384	rep += "is data : %s\n" % self.is_data
385	rep += "data's name : %s\n" % self.data_name
386	rep += "data's id : %s\n" % self.data_id
387	if self.model is not None:
388	m_name = self.model.__class__.__name__
389	if m_name == 'Model':
390	m_name = self.m_name
391	rep += "model name : %s\n" % m_name
392	else:
393	rep += "model name : None\n"
394	rep += "multi_factor : %s\n" % str(self.multi_factor)
395	rep += "magnetic_on : %s\n" % str(self.magnetic_on)
396	rep += "model type (Category) selected: %s\n" % self.categorycombobox
397	rep += "data : %s\n" % str(self.data)
398	rep += "Plotting Range: min: %s, max: %s, steps: %s\n" % \
399	(str(self.qmin),str(self.qmax), str(self.npts))
400	rep += "Dispersion selection : %s\n" % str(self.disp_box)
401	rep += "Smearing enable : %s\n" % str(self.enable_smearer)
402	rep += "Smearing disable : %s\n" % str(self.disable_smearer)
403	rep += "Pinhole smearer enable : %s\n" % str(self.pinhole_smearer)
404	rep += "Slit smearer enable : %s\n" % str(self.slit_smearer)
405	rep += "Dispersity enable : %s\n" % str(self.enable_disp)
406	rep += "Dispersity disable : %s\n" % str(self.disable_disp)
407	rep += "Slit smearer enable: %s\n" % str(self.slit_smearer)
408
409	rep += "dI_noweight : %s\n" % str(self.dI_noweight)
410	rep += "dI_didata : %s\n" % str(self.dI_didata)
411	rep += "dI_sqrdata : %s\n" % str(self.dI_sqrdata)
412	rep += "dI_idata : %s\n" % str(self.dI_idata)
413
414	rep += "2D enable : %s\n" % str(self.enable2D)
415	rep += "All parameters checkbox selected: %s\n" % str(self.cb1)
416	rep += "Value of Chisqr : %s\n" % str(self.tcChi)
417	rep += "Smear object : %s\n" % str(self.smearer)
418	rep += "Smear type : %s\n" % str(self.smear_type)
419	rep += "dq_l : %s\n" % self.dq_l
420	rep += "dq_r : %s\n" % self.dq_r
421	rep += "dx_max : %s\n" % str(self.dx_max)
422	rep += "dx_min : %s\n" % str(self.dx_min)
423	rep += "dxl : %s\n" % str(self.dxl)
424	rep += "dxw : %s\n" % str(self.dxw)
425	rep += "model : %s\n\n" % str(self.model)
426	temp_parameters = []
427	temp_fittable_param = []
428	if self.data.__class__.__name__ == "Data2D":
429	self.is_2D = True
430	else:
431	self.is_2D = False
432	if self.data is not None:
433	if not self.is_2D:
434	for item in self.parameters:
435	if item not in self.orientation_params:
436	temp_parameters.append(item)
437	for item in self.fittable_param:
438	if item not in self.orientation_params_disp:
439	temp_fittable_param.append(item)
440	else:
441	temp_parameters = self.parameters
442	temp_fittable_param = self.fittable_param
443
444	rep += "number parameters(self.parameters): %s\n" % \
445	len(temp_parameters)
446	rep = self._repr_helper(list=temp_parameters, rep=rep)
447	rep += "number str_parameters(self.str_parameters): %s\n" % \
448	len(self.str_parameters)
449	rep = self._repr_helper(list=self.str_parameters, rep=rep)
450	rep += "number fittable_param(self.fittable_param): %s\n" % \
451	len(temp_fittable_param)
452	rep = self._repr_helper(list=temp_fittable_param, rep=rep)
453	return rep
454
455	def set_report_string(self):
456	"""
457	Get the values (strings) from __str__ for report
458	"""
459	# Dictionary of the report strings
460	repo_time = ""
461	model_name = ""
462	title = ""
463	title_name = ""
464	file_name = ""
465	param_string = ""
466	paramval_string = ""
467	chi2_string = ""
468	q_range = ""
469	strings = self.__repr__()
470	lines = strings.split('\n')
471
472	# get all string values from __str__()
473	for line in lines:
474	value = ""
475	content = line.split(":")
476	name = content[0]
477	try:
478	value = content[1]
479	except Exception:
480	msg = "Report string expected 'name: value' but got %r"%line
481	logging.error(msg)
482	if name.count("State created"):
483	repo_time = "" + value
484	if name.count("parameter name"):
485	val_name = value.split(".")
486	if len(val_name) > 1:
487	if val_name[1].count("width"):
488	param_string += value + ','
489	else:
490	continue
491	else:
492	param_string += value + ','
493	if name == "value":
494	param_string += value + ','
495	if name == "selected":
496	if value == u' False':
497	fixed_parameter = True
498	else:
499	fixed_parameter = False
500	if name == "error value":
501	if fixed_parameter:
502	param_string += '(fixed),'
503	else:
504	param_string += value + ','
505	if name == "parameter unit":
506	param_string += value + ':'
507	if name == "Value of Chisqr ":
508	chi2 = ("Chi2/Npts = " + value)
509	chi2_string = CENTRE % chi2
510	if name == "Title":
511	if len(value.strip()) == 0:
512	continue
513	title = value + " [" + repo_time + "]"
514	title_name = HEADER % title
515	if name == "data ":
516	try:
517	file_value = ("File name:" + content[2])
518	file_name = CENTRE % file_value
519	if len(title) == 0:
520	title = content[2] + " [" + repo_time + "]"
521	title_name = HEADER % title
522	except Exception:
523	msg = "While parsing 'data: ...'\n"
524	logging.error(msg + traceback.format_exc())
525	if name == "model name ":
526	try:
527	modelname = "Model name:" + content[1]
528	except:
529	modelname = "Model name:" + " NAN"
530	model_name = CENTRE % modelname
531
532	if name == "Plotting Range":
533	try:
534	q_range = content[1] + " = " + content[2] \
535	+ " = " + content[3].split(",")[0]
536	q_name = ("Q Range: " + q_range)
537	q_range = CENTRE % q_name
538	except Exception:
539	msg = "While parsing 'Plotting Range: ...'\n"
540	logging.error(msg + traceback.format_exc())
541	paramval = ""
542	for lines in param_string.split(":"):
543	line = lines.split(",")
544	if len(lines) > 0:
545	param = line[0]
546	param += " = " + line[1]
547	if len(line[2].split()) > 0 and not line[2].count("None"):
548	param += " +- " + line[2]
549	if len(line[3].split()) > 0 and not line[3].count("None"):
550	param += " " + line[3]
551	if not paramval.count(param):
552	paramval += param + "\n"
553	paramval_string += CENTRE % param + "\n"
554
555	text_string = "\n\n\n%s\n\n%s\n%s\n%s\n\n%s" % \
556	(title, file, q_name, chi2, paramval)
557
558	title_name = self._check_html_format(title_name)
559	file_name = self._check_html_format(file_name)
560	title = self._check_html_format(title)
561
562	html_string = title_name + "\n" + file_name + \
563	"\n" + model_name + \
564	"\n" + q_range + \
565	"\n" + chi2_string + \
566	"\n" + ELINE + \
567	"\n" + paramval_string + \
568	"\n" + ELINE + \
569	"\n" + FEET_1 % title + \
570	"\n" + FEET_2
571
572	return html_string, text_string, title
573
574	def _check_html_format(self, name):
575	"""
576	Check string '%' for html format
577	"""
578	if name.count('%'):
579	name = name.replace('%', '&#37')
580
581	return name
582
583	def report(self, figs=None, canvases=None):
584	"""
585	Invoke report dialog panel
586
587	: param figs: list of pylab figures [list]
588	"""
589	from sas.sasgui.perspectives.fitting.report_dialog import ReportDialog
590	# get the strings for report
591	html_str, text_str, title = self.set_report_string()
592	# Allow 2 figures to append
593	if len(figs) == 1:
594	add_str = FEET_3
595	elif len(figs) == 2:
596	add_str = ELINE
597	add_str += FEET_2 % ("%s")
598	add_str += ELINE
599	add_str += FEET_3
600	elif len(figs) > 2:
601	add_str = ELINE
602	add_str += FEET_2 % ("%s")
603	add_str += ELINE
604	add_str += FEET_2 % ("%s")
605	add_str += ELINE
606	add_str += FEET_3
607	else:
608	add_str = ""
609
610	# final report html strings
611	report_str = html_str % ("%s") + add_str
612
613	# make plot image
614	images = self.set_plot_state(figs, canvases)
615	report_list = [report_str, text_str, images]
616	dialog = ReportDialog(report_list, None, wx.ID_ANY, "")
617	dialog.Show()
618
619	def _toXML_helper(self, thelist, element, newdoc):
620	"""
621	Helper method to create xml file for saving state
622	"""
623	for item in thelist:
624	sub_element = newdoc.createElement('parameter')
625	sub_element.setAttribute('name', str(item[1]))
626	sub_element.setAttribute('value', str(item[2]))
627	sub_element.setAttribute('selected_to_fit', str(item[0]))
628	sub_element.setAttribute('error_displayed', str(item[4][0]))
629	sub_element.setAttribute('error_value', str(item[4][1]))
630	sub_element.setAttribute('minimum_displayed', str(item[5][0]))
631	sub_element.setAttribute('minimum_value', str(item[5][1]))
632	sub_element.setAttribute('maximum_displayed', str(item[6][0]))
633	sub_element.setAttribute('maximum_value', str(item[6][1]))
634	sub_element.setAttribute('unit', str(item[7]))
635	element.appendChild(sub_element)
636
637	def toXML(self, file="fitting_state.fitv", doc=None,
638	entry_node=None, batch_fit_state=None):
639	"""
640	Writes the state of the fit panel to file, as XML.
641
642	Compatible with standalone writing, or appending to an
643	already existing XML document. In that case, the XML document is
644	required. An optional entry node in the XML document may also be given.
645
646	:param file: file to write to
647	:param doc: XML document object [optional]
648	:param entry_node: XML node within the XML document at which we
649	will append the data [optional]
650	"""
651	from xml.dom.minidom import getDOMImplementation
652
653	# Check whether we have to write a standalone XML file
654	if doc is None:
655	impl = getDOMImplementation()
656	doc_type = impl.createDocumentType(FITTING_NODE_NAME, "1.0", "1.0")
657	newdoc = impl.createDocument(None, FITTING_NODE_NAME, doc_type)
658	top_element = newdoc.documentElement
659	else:
660	# We are appending to an existing document
661	newdoc = doc
662	try:
663	top_element = newdoc.createElement(FITTING_NODE_NAME)
664	except:
665	string = etree.tostring(doc, pretty_print=True)
666	newdoc = parseString(string)
667	top_element = newdoc.createElement(FITTING_NODE_NAME)
668	if entry_node is None:
669	newdoc.documentElement.appendChild(top_element)
670	else:
671	try:
672	entry_node.appendChild(top_element)
673	except:
674	node_name = entry_node.tag
675	node_list = newdoc.getElementsByTagName(node_name)
676	entry_node = node_list.item(0)
677	entry_node.appendChild(top_element)
678
679	attr = newdoc.createAttribute("version")
680	attr.nodeValue = '1.0'
681	top_element.setAttributeNode(attr)
682
683	# File name
684	element = newdoc.createElement("filename")
685	if self.file is not None:
686	element.appendChild(newdoc.createTextNode(str(self.file)))
687	else:
688	element.appendChild(newdoc.createTextNode(str(file)))
689	top_element.appendChild(element)
690
691	element = newdoc.createElement("timestamp")
692	element.appendChild(newdoc.createTextNode(time.ctime(self.timestamp)))
693	attr = newdoc.createAttribute("epoch")
694	attr.nodeValue = str(self.timestamp)
695	element.setAttributeNode(attr)
696	top_element.appendChild(element)
697
698	# Inputs
699	inputs = newdoc.createElement("Attributes")
700	top_element.appendChild(inputs)
701
702	if self.data is not None and hasattr(self.data, "group_id"):
703	self.data_group_id = self.data.group_id
704	if self.data is not None and hasattr(self.data, "is_data"):
705	self.is_data = self.data.is_data
706	if self.data is not None:
707	self.data_name = self.data.name
708	if self.data is not None and hasattr(self.data, "id"):
709	self.data_id = self.data.id
710
711	for item in LIST_OF_DATA_ATTRIBUTES:
712	element = newdoc.createElement(item[0])
713	element.setAttribute(item[0], str(getattr(self, item[1])))
714	inputs.appendChild(element)
715
716	for item in LIST_OF_STATE_ATTRIBUTES:
717	element = newdoc.createElement(item[0])
718	element.setAttribute(item[0], str(getattr(self, item[1])))
719	inputs.appendChild(element)
720
721	# For self.values ={ disp_param_name: [vals,...],...}
722	# and for self.weights ={ disp_param_name: [weights,...],...}
723	for item in LIST_OF_MODEL_ATTRIBUTES:
724	element = newdoc.createElement(item[0])
725	value_list = getattr(self, item[1])
726	for key, value in value_list.iteritems():
727	sub_element = newdoc.createElement(key)
728	sub_element.setAttribute('name', str(key))
729	for val in value:
730	sub_element.appendChild(newdoc.createTextNode(str(val)))
731
732	element.appendChild(sub_element)
733	inputs.appendChild(element)
734
735	# Create doc for the dictionary of self._disp_obj_dic
736	for tagname, varname, tagtype in DISPERSION_LIST:
737	element = newdoc.createElement(tagname)
738	value_list = getattr(self, varname)
739	for key, value in value_list.iteritems():
740	sub_element = newdoc.createElement(key)
741	sub_element.setAttribute('name', str(key))
742	sub_element.setAttribute('value', str(value))
743	element.appendChild(sub_element)
744	inputs.appendChild(element)
745
746	for item in LIST_OF_STATE_PARAMETERS:
747	element = newdoc.createElement(item[0])
748	self._toXML_helper(thelist=getattr(self, item[1]),
749	element=element, newdoc=newdoc)
750	inputs.appendChild(element)
751
752	# Combined and Simultaneous Fit Parameters
753	if batch_fit_state is not None:
754	batch_combo = newdoc.createElement('simultaneous_fit')
755	top_element.appendChild(batch_combo)
756
757	# Simultaneous Fit Number For Linking Later
758	element = newdoc.createElement('sim_fit_number')
759	element.setAttribute('fit_number', str(batch_fit_state.fit_page_no))
760	batch_combo.appendChild(element)
761
762	# Save constraints
763	constraints = newdoc.createElement('constraints')
764	batch_combo.appendChild(constraints)
765	for constraint in batch_fit_state.constraints_list:
766	if constraint.model_cbox.GetValue() != "":
767	# model_cbox, param_cbox, egal_txt, constraint, btRemove, sizer
768	doc_cons = newdoc.createElement('constraint')
769	doc_cons.setAttribute('model_cbox',
770	str(constraint.model_cbox.GetValue()))
771	doc_cons.setAttribute('param_cbox',
772	str(constraint.param_cbox.GetValue()))
773	doc_cons.setAttribute('egal_txt',
774	str(constraint.egal_txt.GetLabel()))
775	doc_cons.setAttribute('constraint',
776	str(constraint.constraint.GetValue()))
777	constraints.appendChild(doc_cons)
778
779	# Save all models
780	models = newdoc.createElement('model_list')
781	batch_combo.appendChild(models)
782	for model in batch_fit_state.model_list:
783	doc_model = newdoc.createElement('model_list_item')
784	doc_model.setAttribute('checked', str(model[0].GetValue()))
785	keys = model[1].keys()
786	doc_model.setAttribute('name', str(keys[0]))
787	values = model[1].get(keys[0])
788	doc_model.setAttribute('fit_number', str(model[2]))
789	doc_model.setAttribute('fit_page_source', str(model[3]))
790	doc_model.setAttribute('model_name', str(values.model.id))
791	models.appendChild(doc_model)
792
793	# Select All Checkbox
794	element = newdoc.createElement('select_all')
795	if batch_fit_state.select_all:
796	element.setAttribute('checked', 'True')
797	else:
798	element.setAttribute('checked', 'False')
799	batch_combo.appendChild(element)
800
801	# Save the file
802	if doc is None:
803	fd = open(file, 'w')
804	fd.write(newdoc.toprettyxml())
805	fd.close()
806	return None
807	else:
808	return newdoc
809
810	def _fromXML_helper(self, node, list):
811	"""
812	Helper function to write state to xml
813	"""
814	for item in node:
815	try:
816	name = item.get('name')
817	except:
818	name = None
819	try:
820	value = item.get('value')
821	except:
822	value = None
823	try:
824	selected_to_fit = (item.get('selected_to_fit') == "True")
825	except:
826	selected_to_fit = None
827	try:
828	error_displayed = (item.get('error_displayed') == "True")
829	except:
830	error_displayed = None
831	try:
832	error_value = item.get('error_value')
833	except:
834	error_value = None
835	try:
836	minimum_displayed = (item.get('minimum_displayed') == "True")
837	except:
838	minimum_displayed = None
839	try:
840	minimum_value = item.get('minimum_value')
841	except:
842	minimum_value = None
843	try:
844	maximum_displayed = (item.get('maximum_displayed') == "True")
845	except:
846	maximum_displayed = None
847	try:
848	maximum_value = item.get('maximum_value')
849	except:
850	maximum_value = None
851	try:
852	unit = item.get('unit')
853	except:
854	unit = None
855	list.append([selected_to_fit, name, value, "+/-",
856	[error_displayed, error_value],
857	[minimum_displayed, minimum_value],
858	[maximum_displayed, maximum_value], unit])
859
860	def fromXML(self, file=None, node=None):
861	"""
862	Load fitting state from a file
863
864	:param file: .fitv file
865	:param node: node of a XML document to read from
866	"""
867	if file is not None:
868	msg = "PageState no longer supports non-CanSAS"
869	msg += " format for fitting files"
870	raise RuntimeError, msg
871
872	if node.get('version') and node.get('version') == '1.0':
873
874	# Get file name
875	entry = get_content('ns:filename', node)
876	if entry is not None:
877	self.file = entry.text.strip()
878
879	# Get time stamp
880	entry = get_content('ns:timestamp', node)
881	if entry is not None and entry.get('epoch'):
882	try:
883	self.timestamp = float(entry.get('epoch'))
884	except:
885	msg = "PageState.fromXML: Could not"
886	msg += " read timestamp\n %s" % sys.exc_value
887	logging.error(msg)
888
889	# Parse fitting attributes
890	entry = get_content('ns:Attributes', node)
891	for item in LIST_OF_DATA_ATTRIBUTES:
892	node = get_content('ns:%s' % item[0], entry)
893	setattr(self, item[0], parse_entry_helper(node, item))
894
895	if entry is not None:
896	for item in LIST_OF_STATE_ATTRIBUTES:
897	node = get_content('ns:%s' % item[0], entry)
898	setattr(self, item[0], parse_entry_helper(node, item))
899
900	for item in LIST_OF_STATE_PARAMETERS:
901	node = get_content("ns:%s" % item[0], entry)
902	self._fromXML_helper(node=node, list=getattr(self, item[1]))
903
904	# Recover _disp_obj_dict from xml file
905	self._disp_obj_dict = {}
906	for tagname, varname, tagtype in DISPERSION_LIST:
907	node = get_content("ns:%s" % tagname, entry)
908	for attr in node:
909	parameter = str(attr.get('name'))
910	value = attr.get('value')
911	if value.startswith("<"):
912	try:
913	# <path.to.NamedDistribution object/instance...>
914	cls_name = value[1:].split()[0].split('.')[-1]
915	cls = getattr(sasmodels.weights, cls_name)
916	value = cls.type
917	except Exception:
918	base = "unable to load distribution %r for %s"
919	logging.error(base % (value, parameter))
920	continue
921	_disp_obj_dict = getattr(self, varname)
922	_disp_obj_dict[parameter] = value
923
924	# get self.values and self.weights dic. if exists
925	for tagname, varname in LIST_OF_MODEL_ATTRIBUTES:
926	node = get_content("ns:%s" % tagname, entry)
927	dic = {}
928	value_list = []
929	for par in node:
930	name = par.get('name')
931	values = par.text.split()
932	# Get lines only with numbers
933	for line in values:
934	try:
935	val = float(line)
936	value_list.append(val)
937	except Exception:
938	# pass if line is empty (it happens)
939	msg = ("Error reading %r from %s %s\n"
940	% (line, tagname, name))
941	logging.error(msg + traceback.format_exc())
942	dic[name] = numpy.array(value_list)
943	setattr(self, varname, dic)
944
945	def set_plot_state(self, figs, canvases):
946	"""
947	Build image state that wx.html understand
948	by plotting, putting it into wx.FileSystem image object
949
950	"""
951	images = []
952	# some imports
953	import wx
954
955	# Reset memory
956	self.imgRAM = None
957	wx.MemoryFSHandler()
958
959	# For no figures in the list, prepare empty plot
960	if figs == None or len(figs) == 0:
961	figs = [None]
962
963	# Loop over the list of figures
964	# use wx.MemoryFSHandler
965	self.imgRAM = wx.MemoryFSHandler()
966	for fig in figs:
967	if figs != None:
968	ind = figs.index(fig)
969	canvas = canvases[ind]
970
971	#store the image in wx.FileSystem Object
972	wx.FileSystem.AddHandler(wx.MemoryFSHandler())
973
974	# index of the fig
975	ind = figs.index(fig)
976
977	#AddFile, image can be retrieved with 'memory:filename'
978	self.imgRAM.AddFile('img_fit%s.png' % ind,
979	canvas.bitmap, wx.BITMAP_TYPE_PNG)
980
981	#append figs
982	images.append(fig)
983
984	return images
985
986
987	class Reader(CansasReader):
988	"""
989	Class to load a .fitv fitting file
990	"""
991	## File type
992	type_name = "Fitting"
993
994	## Wildcards
995	type = ["Fitting files (.fitv)\|.fitv"
996	"SASView file (.svs)\|.svs"]
997	## List of allowed extensions
998	ext = ['.fitv', '.FITV', '.svs', 'SVS']
999
1000	def __init__(self, call_back=None, cansas=True):
1001	CansasReader.__init__(self)
1002	"""
1003	Initialize the call-back method to be called
1004	after we load a file
1005
1006	:param call_back: call-back method
1007	:param cansas: True = files will be written/read in CanSAS format
1008	False = write CanSAS format
1009
1010	"""
1011	## Call back method to be executed after a file is read
1012	self.call_back = call_back
1013	## CanSAS format flag
1014	self.cansas = cansas
1015	self.state = None
1016	# batch fitting params for saving
1017	self.batchfit_params = []
1018
1019	def get_state(self):
1020	return self.state
1021
1022	def read(self, path):
1023	"""
1024	Load a new P(r) inversion state from file
1025
1026	:param path: file path
1027
1028	"""
1029	if self.cansas == True:
1030	return self._read_cansas(path)
1031
1032	def _data2d_to_xml_doc(self, datainfo):
1033	"""
1034	Create an XML document to contain the content of a Data2D
1035
1036	:param datainfo: Data2D object
1037
1038	"""
1039	if not issubclass(datainfo.__class__, Data2D):
1040	raise RuntimeError, "The cansas writer expects a Data2D instance"
1041
1042	title = "cansas1d/%s" % self.version
1043	title += "http://svn.smallangles.net/svn/canSAS/1dwg/trunk/cansas1d.xsd"
1044	doc = xml.dom.minidom.Document()
1045	main_node = doc.createElement("SASroot")
1046	main_node.setAttribute("version", self.version)
1047	main_node.setAttribute("xmlns", "cansas1d/%s" % self.version)
1048	main_node.setAttribute("xmlns:xsi",
1049	"http://www.w3.org/2001/XMLSchema-instance")
1050	main_node.setAttribute("xsi:schemaLocation", title)
1051
1052	doc.appendChild(main_node)
1053
1054	entry_node = doc.createElement("SASentry")
1055	main_node.appendChild(entry_node)
1056
1057	write_node(doc, entry_node, "Title", datainfo.title)
1058	if datainfo is not None:
1059	write_node(doc, entry_node, "data_class",
1060	datainfo.__class__.__name__)
1061	for item in datainfo.run:
1062	runname = {}
1063	if datainfo.run_name.has_key(item) and \
1064	len(str(datainfo.run_name[item])) > 1:
1065	runname = {'name': datainfo.run_name[item]}
1066	write_node(doc, entry_node, "Run", item, runname)
1067	# Data info
1068	new_node = doc.createElement("SASdata")
1069	entry_node.appendChild(new_node)
1070	for item in LIST_OF_DATA_2D_ATTR:
1071	element = doc.createElement(item[0])
1072	element.setAttribute(item[0], str(getattr(datainfo, item[1])))
1073	new_node.appendChild(element)
1074
1075	for item in LIST_OF_DATA_2D_VALUES:
1076	root_node = doc.createElement(item[0])
1077	new_node.appendChild(root_node)
1078	temp_list = None
1079	temp_list = getattr(datainfo, item[1])
1080
1081	if temp_list is None or len(temp_list) == 0:
1082	element = doc.createElement(item[0])
1083	element.appendChild(doc.createTextNode(str(temp_list)))
1084	root_node.appendChild(element)
1085	else:
1086	for value in temp_list:
1087	element = doc.createElement(item[0])
1088	element.setAttribute(item[0], str(value))
1089	root_node.appendChild(element)
1090
1091	# Sample info
1092	sample = doc.createElement("SASsample")
1093	if datainfo.sample.name is not None:
1094	sample.setAttribute("name", str(datainfo.sample.name))
1095	entry_node.appendChild(sample)
1096	write_node(doc, sample, "ID", str(datainfo.sample.ID))
1097	write_node(doc, sample, "thickness", datainfo.sample.thickness,
1098	{"unit": datainfo.sample.thickness_unit})
1099	write_node(doc, sample, "transmission", datainfo.sample.transmission)
1100	write_node(doc, sample, "temperature", datainfo.sample.temperature,
1101	{"unit": datainfo.sample.temperature_unit})
1102
1103	for item in datainfo.sample.details:
1104	write_node(doc, sample, "details", item)
1105
1106	pos = doc.createElement("position")
1107	written = write_node(doc, pos, "x", datainfo.sample.position.x,
1108	{"unit": datainfo.sample.position_unit})
1109	written = written \| write_node(doc, pos, "y",
1110	datainfo.sample.position.y,
1111	{"unit": datainfo.sample.position_unit})
1112	written = written \| write_node(doc, pos, "z",
1113	datainfo.sample.position.z,
1114	{"unit": datainfo.sample.position_unit})
1115	if written == True:
1116	sample.appendChild(pos)
1117
1118	ori = doc.createElement("orientation")
1119	written = write_node(doc, ori, "roll", datainfo.sample.orientation.x,
1120	{"unit": datainfo.sample.orientation_unit})
1121	written = written \| write_node(doc, ori, "pitch",
1122	datainfo.sample.orientation.y,
1123	{"unit": datainfo.sample.orientation_unit})
1124	written = written \| write_node(doc, ori, "yaw",
1125	datainfo.sample.orientation.z,
1126	{"unit": datainfo.sample.orientation_unit})
1127	if written == True:
1128	sample.appendChild(ori)
1129
1130	# Instrument info
1131	instr = doc.createElement("SASinstrument")
1132	entry_node.appendChild(instr)
1133
1134	write_node(doc, instr, "name", datainfo.instrument)
1135
1136	# Source
1137	source = doc.createElement("SASsource")
1138	if datainfo.source.name is not None:
1139	source.setAttribute("name", str(datainfo.source.name))
1140	instr.appendChild(source)
1141
1142	write_node(doc, source, "radiation", datainfo.source.radiation)
1143	write_node(doc, source, "beam_shape", datainfo.source.beam_shape)
1144	size = doc.createElement("beam_size")
1145	if datainfo.source.beam_size_name is not None:
1146	size.setAttribute("name", str(datainfo.source.beam_size_name))
1147	written = write_node(doc, size, "x", datainfo.source.beam_size.x,
1148	{"unit": datainfo.source.beam_size_unit})
1149	written = written \| write_node(doc, size, "y",
1150	datainfo.source.beam_size.y,
1151	{"unit": datainfo.source.beam_size_unit})
1152	written = written \| write_node(doc, size, "z",
1153	datainfo.source.beam_size.z,
1154	{"unit": datainfo.source.beam_size_unit})
1155	if written == True:
1156	source.appendChild(size)
1157
1158	write_node(doc, source, "wavelength", datainfo.source.wavelength,
1159	{"unit": datainfo.source.wavelength_unit})
1160	write_node(doc, source, "wavelength_min",
1161	datainfo.source.wavelength_min,
1162	{"unit": datainfo.source.wavelength_min_unit})
1163	write_node(doc, source, "wavelength_max",
1164	datainfo.source.wavelength_max,
1165	{"unit": datainfo.source.wavelength_max_unit})
1166	write_node(doc, source, "wavelength_spread",
1167	datainfo.source.wavelength_spread,
1168	{"unit": datainfo.source.wavelength_spread_unit})
1169
1170	# Collimation
1171	for item in datainfo.collimation:
1172	coll = doc.createElement("SAScollimation")
1173	if item.name is not None:
1174	coll.setAttribute("name", str(item.name))
1175	instr.appendChild(coll)
1176
1177	write_node(doc, coll, "length", item.length,
1178	{"unit": item.length_unit})
1179
1180	for apert in item.aperture:
1181	ap = doc.createElement("aperture")
1182	if apert.name is not None:
1183	ap.setAttribute("name", str(apert.name))
1184	if apert.type is not None:
1185	ap.setAttribute("type", str(apert.type))
1186	coll.appendChild(ap)
1187
1188	write_node(doc, ap, "distance", apert.distance,
1189	{"unit": apert.distance_unit})
1190
1191	size = doc.createElement("size")
1192	if apert.size_name is not None:
1193	size.setAttribute("name", str(apert.size_name))
1194	written = write_node(doc, size, "x", apert.size.x,
1195	{"unit": apert.size_unit})
1196	written = written \| write_node(doc, size, "y", apert.size.y,
1197	{"unit": apert.size_unit})
1198	written = written \| write_node(doc, size, "z", apert.size.z,
1199	{"unit": apert.size_unit})
1200	if written == True:
1201	ap.appendChild(size)
1202
1203	# Detectors
1204	for item in datainfo.detector:
1205	det = doc.createElement("SASdetector")
1206	written = write_node(doc, det, "name", item.name)
1207	written = written \| write_node(doc, det, "SDD", item.distance,
1208	{"unit": item.distance_unit})
1209	written = written \| write_node(doc, det, "slit_length",
1210	item.slit_length,
1211	{"unit": item.slit_length_unit})
1212	if written == True:
1213	instr.appendChild(det)
1214
1215	off = doc.createElement("offset")
1216	written = write_node(doc, off, "x", item.offset.x,
1217	{"unit": item.offset_unit})
1218	written = written \| write_node(doc, off, "y", item.offset.y,
1219	{"unit": item.offset_unit})
1220	written = written \| write_node(doc, off, "z", item.offset.z,
1221	{"unit": item.offset_unit})
1222	if written == True:
1223	det.appendChild(off)
1224
1225	center = doc.createElement("beam_center")
1226	written = write_node(doc, center, "x", item.beam_center.x,
1227	{"unit": item.beam_center_unit})
1228	written = written \| write_node(doc, center, "y",
1229	item.beam_center.y,
1230	{"unit": item.beam_center_unit})
1231	written = written \| write_node(doc, center, "z",
1232	item.beam_center.z,
1233	{"unit": item.beam_center_unit})
1234	if written == True:
1235	det.appendChild(center)
1236
1237	pix = doc.createElement("pixel_size")
1238	written = write_node(doc, pix, "x", item.pixel_size.x,
1239	{"unit": item.pixel_size_unit})
1240	written = written \| write_node(doc, pix, "y", item.pixel_size.y,
1241	{"unit": item.pixel_size_unit})
1242	written = written \| write_node(doc, pix, "z", item.pixel_size.z,
1243	{"unit": item.pixel_size_unit})
1244	if written == True:
1245	det.appendChild(pix)
1246
1247	ori = doc.createElement("orientation")
1248	written = write_node(doc, ori, "roll", item.orientation.x,
1249	{"unit": item.orientation_unit})
1250	written = written \| write_node(doc, ori, "pitch",
1251	item.orientation.y,
1252	{"unit": item.orientation_unit})
1253	written = written \| write_node(doc, ori, "yaw", item.orientation.z,
1254	{"unit": item.orientation_unit})
1255	if written == True:
1256	det.appendChild(ori)
1257
1258	# Processes info
1259	for item in datainfo.process:
1260	node = doc.createElement("SASprocess")
1261	entry_node.appendChild(node)
1262
1263	write_node(doc, node, "name", item.name)
1264	write_node(doc, node, "date", item.date)
1265	write_node(doc, node, "description", item.description)
1266	for term in item.term:
1267	value = term['value']
1268	del term['value']
1269	write_node(doc, node, "term", value, term)
1270	for note in item.notes:
1271	write_node(doc, node, "SASprocessnote", note)
1272	# Return the document, and the SASentry node associated with
1273	# the data we just wrote
1274	return doc, entry_node
1275
1276	def _parse_state(self, entry):
1277	"""
1278	Read a fit result from an XML node
1279
1280	:param entry: XML node to read from
1281	:return: PageState object
1282	"""
1283	# Create an empty state
1284	state = None
1285	# Locate the P(r) node
1286	try:
1287	nodes = entry.xpath('ns:%s' % FITTING_NODE_NAME,
1288	namespaces={'ns': CANSAS_NS})
1289	if nodes:
1290	# Create an empty state
1291	state = PageState()
1292	state.fromXML(node=nodes[0])
1293
1294	except:
1295	logging.info("XML document does not contain fitting information.\n"
1296	+ traceback.format_exc())
1297
1298	return state
1299
1300	def _parse_simfit_state(self, entry):
1301	"""
1302	Parses the saved data for a simultaneous fit
1303	:param entry: XML object to read from
1304	:return: XML object for a simultaneous fit or None
1305	"""
1306	nodes = entry.xpath('ns:%s' % FITTING_NODE_NAME,
1307	namespaces={'ns': CANSAS_NS})
1308	if nodes:
1309	simfitstate = nodes[0].xpath('ns:simultaneous_fit',
1310	namespaces={'ns': CANSAS_NS})
1311	if simfitstate:
1312	from simfitpage import SimFitPageState
1313	sim_fit_state = SimFitPageState()
1314	simfitstate_0 = simfitstate[0]
1315	all = simfitstate_0.xpath('ns:select_all',
1316	namespaces={'ns': CANSAS_NS})
1317	atts = all[0].attrib
1318	checked = atts.get('checked')
1319	sim_fit_state.select_all = bool(checked)
1320	model_list = simfitstate_0.xpath('ns:model_list',
1321	namespaces={'ns': CANSAS_NS})
1322	model_list_items = model_list[0].xpath('ns:model_list_item',
1323	namespaces={'ns': CANSAS_NS})
1324	for model in model_list_items:
1325	attrs = model.attrib
1326	sim_fit_state.model_list.append(attrs)
1327
1328	constraints = simfitstate_0.xpath('ns:constraints',
1329	namespaces={'ns': CANSAS_NS})
1330	constraint_list = constraints[0].xpath('ns:constraint',
1331	namespaces={'ns': CANSAS_NS})
1332	for constraint in constraint_list:
1333	attrs = constraint.attrib
1334	sim_fit_state.constraints_list.append(attrs)
1335
1336	return sim_fit_state
1337	else:
1338	return None
1339
1340	def _parse_save_state_entry(self, dom):
1341	"""
1342	Parse a SASentry
1343
1344	:param node: SASentry node
1345
1346	:return: Data1D/Data2D object
1347
1348	"""
1349	node = dom.xpath('ns:data_class', namespaces={'ns': CANSAS_NS})
1350	if not node or node[0].text.lstrip().rstrip() != "Data2D":
1351	return_value, _ = self._parse_entry(dom)
1352	numpy.trim_zeros(return_value.x)
1353	numpy.trim_zeros(return_value.y)
1354	numpy.trim_zeros(return_value.dy)
1355	size_dx = return_value.dx.size
1356	size_dxl = return_value.dxl.size
1357	size_dxw = return_value.dxw.size
1358	if size_dxl == 0 and size_dxw == 0:
1359	return_value.dxl = None
1360	return_value.dxw = None
1361	numpy.trim_zeros(return_value.dx)
1362	elif size_dx == 0:
1363	return_value.dx = None
1364	size_dx = size_dxl
1365	numpy.trim_zeros(return_value.dxl)
1366	numpy.trim_zeros(return_value.dxw)
1367
1368	return return_value, _
1369
1370	#Parse 2D
1371	data_info = Data2D()
1372
1373	# Look up title
1374	self._store_content('ns:Title', dom, 'title', data_info)
1375
1376	# Look up run number
1377	nodes = dom.xpath('ns:Run', namespaces={'ns': CANSAS_NS})
1378	for item in nodes:
1379	if item.text is not None:
1380	value = item.text.strip()
1381	if len(value) > 0:
1382	data_info.run.append(value)
1383	if item.get('name') is not None:
1384	data_info.run_name[value] = item.get('name')
1385
1386	# Look up instrument name
1387	self._store_content('ns:SASinstrument/ns:name', dom,
1388	'instrument', data_info)
1389
1390	# Notes
1391	note_list = dom.xpath('ns:SASnote', namespaces={'ns': CANSAS_NS})
1392	for note in note_list:
1393	try:
1394	if note.text is not None:
1395	note_value = note.text.strip()
1396	if len(note_value) > 0:
1397	data_info.notes.append(note_value)
1398	except Exception:
1399	err_mess = "cansas_reader.read: error processing entry notes\n"
1400	err_mess += " %s" % sys.exc_value
1401	self.errors.append(err_mess)
1402	logging.error(err_mess)
1403
1404	# Sample info ###################
1405	entry = get_content('ns:SASsample', dom)
1406	if entry is not None:
1407	data_info.sample.name = entry.get('name')
1408
1409	self._store_content('ns:SASsample/ns:ID', dom, 'ID', data_info.sample)
1410	self._store_float('ns:SASsample/ns:thickness', dom, 'thickness',
1411	data_info.sample)
1412	self._store_float('ns:SASsample/ns:transmission', dom, 'transmission',
1413	data_info.sample)
1414	self._store_float('ns:SASsample/ns:temperature', dom, 'temperature',
1415	data_info.sample)
1416
1417	nodes = dom.xpath('ns:SASsample/ns:details',
1418	namespaces={'ns': CANSAS_NS})
1419	for item in nodes:
1420	try:
1421	if item.text is not None:
1422	detail_value = item.text.strip()
1423	if len(detail_value) > 0:
1424	data_info.sample.details.append(detail_value)
1425	except Exception:
1426	err_mess = "cansas_reader.read: error processing entry notes\n"
1427	err_mess += " %s" % sys.exc_value
1428	self.errors.append(err_mess)
1429	logging.error(err_mess)
1430
1431	# Position (as a vector)
1432	self._store_float('ns:SASsample/ns:position/ns:x', dom, 'position.x',
1433	data_info.sample)
1434	self._store_float('ns:SASsample/ns:position/ns:y', dom, 'position.y',
1435	data_info.sample)
1436	self._store_float('ns:SASsample/ns:position/ns:z', dom, 'position.z',
1437	data_info.sample)
1438
1439	# Orientation (as a vector)
1440	self._store_float('ns:SASsample/ns:orientation/ns:roll',
1441	dom, 'orientation.x', data_info.sample)
1442	self._store_float('ns:SASsample/ns:orientation/ns:pitch',
1443	dom, 'orientation.y', data_info.sample)
1444	self._store_float('ns:SASsample/ns:orientation/ns:yaw',
1445	dom, 'orientation.z', data_info.sample)
1446
1447	# Source info ###################
1448	entry = get_content('ns:SASinstrument/ns:SASsource', dom)
1449	if entry is not None:
1450	data_info.source.name = entry.get('name')
1451
1452	self._store_content('ns:SASinstrument/ns:SASsource/ns:radiation',
1453	dom, 'radiation', data_info.source)
1454	self._store_content('ns:SASinstrument/ns:SASsource/ns:beam_shape',
1455	dom, 'beam_shape', data_info.source)
1456	self._store_float('ns:SASinstrument/ns:SASsource/ns:wavelength',
1457	dom, 'wavelength', data_info.source)
1458	self._store_float('ns:SASinstrument/ns:SASsource/ns:wavelength_min',
1459	dom, 'wavelength_min', data_info.source)
1460	self._store_float('ns:SASinstrument/ns:SASsource/ns:wavelength_max',
1461	dom, 'wavelength_max', data_info.source)
1462	self._store_float('ns:SASinstrument/ns:SASsource/ns:wavelength_spread',
1463	dom, 'wavelength_spread', data_info.source)
1464
1465	# Beam size (as a vector)
1466	entry = get_content('ns:SASinstrument/ns:SASsource/ns:beam_size', dom)
1467	if entry is not None:
1468	data_info.source.beam_size_name = entry.get('name')
1469
1470	self._store_float('ns:SASinstrument/ns:SASsource/ns:beam_size/ns:x',
1471	dom, 'beam_size.x', data_info.source)
1472	self._store_float('ns:SASinstrument/ns:SASsource/ns:beam_size/ns:y',
1473	dom, 'beam_size.y', data_info.source)
1474	self._store_float('ns:SASinstrument/ns:SASsource/ns:beam_size/ns:z',
1475	dom, 'beam_size.z', data_info.source)
1476
1477	# Collimation info ###################
1478	nodes = dom.xpath('ns:SASinstrument/ns:SAScollimation',
1479	namespaces={'ns': CANSAS_NS})
1480	for item in nodes:
1481	collim = Collimation()
1482	if item.get('name') is not None:
1483	collim.name = item.get('name')
1484	self._store_float('ns:length', item, 'length', collim)
1485
1486	# Look for apertures
1487	apert_list = item.xpath('ns:aperture',
1488	namespaces={'ns': CANSAS_NS})
1489	for apert in apert_list:
1490	aperture = Aperture()
1491
1492	# Get the name and type of the aperture
1493	aperture.name = apert.get('name')
1494	aperture.type = apert.get('type')
1495
1496	self._store_float('ns:distance', apert, 'distance', aperture)
1497
1498	entry = get_content('ns:size', apert)
1499	if entry is not None:
1500	aperture.size_name = entry.get('name')
1501
1502	self._store_float('ns:size/ns:x', apert, 'size.x', aperture)
1503	self._store_float('ns:size/ns:y', apert, 'size.y', aperture)
1504	self._store_float('ns:size/ns:z', apert, 'size.z', aperture)
1505
1506	collim.aperture.append(aperture)
1507
1508	data_info.collimation.append(collim)
1509
1510	# Detector info ######################
1511	nodes = dom.xpath('ns:SASinstrument/ns:SASdetector',
1512	namespaces={'ns': CANSAS_NS})
1513	for item in nodes:
1514
1515	detector = Detector()
1516
1517	self._store_content('ns:name', item, 'name', detector)
1518	self._store_float('ns:SDD', item, 'distance', detector)
1519
1520	# Detector offset (as a vector)
1521	self._store_float('ns:offset/ns:x', item, 'offset.x', detector)
1522	self._store_float('ns:offset/ns:y', item, 'offset.y', detector)
1523	self._store_float('ns:offset/ns:z', item, 'offset.z', detector)
1524
1525	# Detector orientation (as a vector)
1526	self._store_float('ns:orientation/ns:roll', item,
1527	'orientation.x', detector)
1528	self._store_float('ns:orientation/ns:pitch', item,
1529	'orientation.y', detector)
1530	self._store_float('ns:orientation/ns:yaw', item,
1531	'orientation.z', detector)
1532
1533	# Beam center (as a vector)
1534	self._store_float('ns:beam_center/ns:x', item,
1535	'beam_center.x', detector)
1536	self._store_float('ns:beam_center/ns:y', item,
1537	'beam_center.y', detector)
1538	self._store_float('ns:beam_center/ns:z', item,
1539	'beam_center.z', detector)
1540
1541	# Pixel size (as a vector)
1542	self._store_float('ns:pixel_size/ns:x', item,
1543	'pixel_size.x', detector)
1544	self._store_float('ns:pixel_size/ns:y', item,
1545	'pixel_size.y', detector)
1546	self._store_float('ns:pixel_size/ns:z', item,
1547	'pixel_size.z', detector)
1548
1549	self._store_float('ns:slit_length', item, 'slit_length', detector)
1550
1551	data_info.detector.append(detector)
1552
1553	# Processes info ######################
1554	nodes = dom.xpath('ns:SASprocess', namespaces={'ns': CANSAS_NS})
1555	for item in nodes:
1556	process = Process()
1557	self._store_content('ns:name', item, 'name', process)
1558	self._store_content('ns:date', item, 'date', process)
1559	self._store_content('ns:description', item, 'description', process)
1560
1561	term_list = item.xpath('ns:term', namespaces={'ns': CANSAS_NS})
1562	for term in term_list:
1563	try:
1564	term_attr = {}
1565	for attr in term.keys():
1566	term_attr[attr] = term.get(attr).strip()
1567	if term.text is not None:
1568	term_attr['value'] = term.text.strip()
1569	process.term.append(term_attr)
1570	except:
1571	err_mess = "cansas_reader.read: error processing "
1572	err_mess += "entry notes\n %s" % sys.exc_value
1573	self.errors.append(err_mess)
1574	logging.error(err_mess)
1575
1576	note_list = item.xpath('ns:SASprocessnote',
1577	namespaces={'ns': CANSAS_NS})
1578	for note in note_list:
1579	if note.text is not None:
1580	process.notes.append(note.text.strip())
1581
1582	data_info.process.append(process)
1583
1584	# Data info ######################
1585	nodes = dom.xpath('ns:SASdata', namespaces={'ns': CANSAS_NS})
1586	if len(nodes) > 1:
1587	raise RuntimeError, "CanSAS reader is not compatible with" + \
1588	" multiple SASdata entries"
1589
1590	for entry in nodes:
1591	for item in LIST_OF_DATA_2D_ATTR:
1592	#get node
1593	node = get_content('ns:%s' % item[0], entry)
1594	setattr(data_info, item[1], parse_entry_helper(node, item))
1595
1596	for item in LIST_OF_DATA_2D_VALUES:
1597	field = get_content('ns:%s' % item[0], entry)
1598	value_list = []
1599	if field is not None:
1600	value_list = \
1601	[parse_entry_helper(node, item) for node in field]
1602	if len(value_list) < 2:
1603	setattr(data_info, item[0], None)
1604	else:
1605	setattr(data_info, item[0], numpy.array(value_list))
1606
1607	return data_info
1608
1609	def _read_cansas(self, path):
1610	"""
1611	Load data and fitting information from a CanSAS XML file.
1612
1613	:param path: file path
1614	:return: Data1D object if a single SASentry was found,
1615	or a list of Data1D objects if multiple entries were found,
1616	or None of nothing was found
1617	:raise RuntimeError: when the file can't be opened
1618	:raise ValueError: when the length of the data vectors are inconsistent
1619	"""
1620	output = []
1621	simfitstate = None
1622	basename = os.path.basename(path)
1623	root, extension = os.path.splitext(basename)
1624	ext = extension.lower()
1625	try:
1626	if os.path.isfile(path):
1627	if ext in self.ext or ext == '.xml':
1628	tree = etree.parse(path, parser=etree.ETCompatXMLParser())
1629	# Check the format version number
1630	# Specifying the namespace will take care of the file
1631	# format version
1632	root = tree.getroot()
1633	entry_list = root.xpath('ns:SASentry',
1634	namespaces={'ns': CANSAS_NS})
1635	name_map = {}
1636	for entry in entry_list:
1637	try:
1638	sas_entry, _ = self._parse_save_state_entry(entry)
1639	except:
1640	raise
1641	fitstate = self._parse_state(entry)
1642	simfitstate = self._parse_simfit_state(entry)
1643
1644	# state could be None when .svs file is loaded
1645	# in this case, skip appending to output
1646	if fitstate is not None:
1647	sas_entry.meta_data['fitstate'] = fitstate
1648	sas_entry.filename = fitstate.file
1649	output.append(sas_entry)
1650
1651	else:
1652	self.call_back(format=ext)
1653	raise RuntimeError, "%s is not a file" % path
1654
1655	# Return output consistent with the loader's api
1656	if len(output) == 0:
1657	self.call_back(state=None, datainfo=None, format=ext)
1658	return None
1659	else:
1660	for ind in range(len(output)):
1661	# Call back to post the new state
1662	state = output[ind].meta_data['fitstate']
1663	t = time.localtime(state.timestamp)
1664	time_str = time.strftime("%b %d %H:%M", t)
1665	# Check that no time stamp is already appended
1666	max_char = state.file.find("[")
1667	if max_char < 0:
1668	max_char = len(state.file)
1669	original_fname = state.file[0:max_char]
1670	state.file = original_fname + ' [' + time_str + ']'
1671
1672	if state is not None and state.is_data is not None:
1673	output[ind].is_data = state.is_data
1674
1675	output[ind].filename = state.file
1676	state.data = output[ind]
1677	state.data.name = output[ind].filename # state.data_name
1678	state.data.id = state.data_id
1679	if state.is_data is not None:
1680	state.data.is_data = state.is_data
1681	if output[ind].run_name is not None\
1682	and len(output[ind].run_name) != 0:
1683	if isinstance(output[ind].run_name, dict):
1684	name = output[ind].run_name.keys()[0]
1685	else:
1686	name = output[ind].run_name
1687	else:
1688	name = original_fname
1689	state.data.group_id = name
1690	# store state in fitting
1691	self.call_back(state=state,
1692	datainfo=output[ind], format=ext)
1693	self.state = state
1694	if simfitstate is not None:
1695	self.call_back(state=simfitstate)
1696
1697	return output
1698	except:
1699	self.call_back(format=ext)
1700	raise
1701
1702	def write(self, filename, datainfo=None, fitstate=None):
1703	"""
1704	Write the content of a Data1D as a CanSAS XML file only for standalone
1705
1706	:param filename: name of the file to write
1707	:param datainfo: Data1D object
1708	:param fitstate: PageState object
1709
1710	"""
1711	# Sanity check
1712	if self.cansas:
1713	# Add fitting information to the XML document
1714	doc = self.write_toXML(datainfo, fitstate)
1715	# Write the XML document
1716	else:
1717	doc = fitstate.toXML(file=filename)
1718
1719	# Save the document no matter the type
1720	fd = open(filename, 'w')
1721	fd.write(doc.toprettyxml())
1722	fd.close()
1723
1724	def write_toXML(self, datainfo=None, state=None, batchfit=None):
1725	"""
1726	Write toXML, a helper for write(),
1727	could be used by guimanager._on_save()
1728
1729	: return: xml doc
1730	"""
1731
1732	self.batchfit_params = batchfit
1733	if state.data is None or not state.data.is_data:
1734	return None
1735	# make sure title and data run are filled.
1736	if state.data.title is None or state.data.title == '':
1737	state.data.title = state.data.name
1738	if state.data.run_name is None or state.data.run_name == {}:
1739	state.data.run = [str(state.data.name)]
1740	state.data.run_name[0] = state.data.name
1741
1742	if issubclass(state.data.__class__,
1743	sas.sascalc.dataloader.data_info.Data1D):
1744	data = state.data
1745	doc, sasentry = self._to_xml_doc(data)
1746	else:
1747	data = state.data
1748	doc, sasentry = self._data2d_to_xml_doc(data)
1749
1750	if state is not None:
1751	doc = state.toXML(doc=doc, file=data.filename, entry_node=sasentry,
1752	batch_fit_state=self.batchfit_params)
1753
1754	return doc

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/src/sas/sasgui/perspectives/fitting/pagestate.py @ 998ca90

Download in other formats: