gui_manager.py @ 998ca90

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 998ca90 was 998ca90, checked in by krzywon, 8 years ago
#189 #12 Saving and loading project now fully saves and loads a simultaneous fits. Loading a project will reset Sasview state to its base state (with a warning). One error on load to fix before calling this finished.
Property mode set to `100644`
File size: 125.6 KB

Line
1	"""
2	Gui manager: manages the widgets making up an application
3	"""
4	################################################################################
5	#This software was developed by the University of Tennessee as part of the
6	#Distributed Data Analysis of Neutron Scattering Experiments (DANSE)
7	#project funded by the US National Science Foundation.
8	#
9	#See the license text in license.txtz
10	#
11	#copyright 2008, University of Tennessee
12	################################################################################
13
14
15	import wx
16	import wx.aui
17	import os
18	import sys
19	import time
20	import imp
21	import warnings
22	import re
23	warnings.simplefilter("ignore")
24	import logging
25	import httplib
26	import traceback
27	import urllib
28	import urllib2
29	import json
30
31	from sas.sasgui.guiframe.events import EVT_CATEGORY
32	from sas.sasgui.guiframe.events import EVT_STATUS
33	from sas.sasgui.guiframe.events import EVT_APPEND_BOOKMARK
34	from sas.sasgui.guiframe.events import EVT_PANEL_ON_FOCUS
35	from sas.sasgui.guiframe.events import EVT_NEW_LOAD_DATA
36	from sas.sasgui.guiframe.events import EVT_NEW_COLOR
37	from sas.sasgui.guiframe.events import StatusEvent
38	from sas.sasgui.guiframe.events import NewPlotEvent
39	from sas.sasgui.guiframe.gui_style import GUIFRAME
40	from sas.sasgui.guiframe.gui_style import GUIFRAME_ID
41	from sas.sasgui.guiframe.data_panel import DataPanel
42	from sas.sasgui.guiframe.panel_base import PanelBase
43	from sas.sasgui.guiframe.gui_toolbar import GUIToolBar
44	from sas.sasgui.guiframe.data_processor import GridFrame
45	from sas.sasgui.guiframe.events import EVT_NEW_BATCH
46	from sas.sasgui.guiframe.CategoryManager import CategoryManager
47	from sas.sascalc.dataloader.loader import Loader
48	from sas.sasgui.guiframe.proxy import Connection
49	from matplotlib import _pylab_helpers
50
51
52	def get_app_dir():
53	"""
54	The application directory is the one where the default custom_config.py
55	file resides.
56
57	:returns: app_path - the path to the applicatin directory
58	"""
59	# First, try the directory of the executable we are running
60	app_path = sys.path[0]
61	if os.path.isfile(app_path):
62	app_path = os.path.dirname(app_path)
63	if os.path.isfile(os.path.join(app_path, "custom_config.py")):
64	app_path = os.path.abspath(app_path)
65	logging.info("Using application path: %s", app_path)
66	return app_path
67
68	# Next, try the current working directory
69	if os.path.isfile(os.path.join(os.getcwd(), "custom_config.py")):
70	logging.info("Using application path: %s", os.getcwd())
71	return os.path.abspath(os.getcwd())
72
73	# Finally, try the directory of the sasview module
74	# TODO: gui_manager will have to know about sasview until we
75	# clean all these module variables and put them into a config class
76	# that can be passed by sasview.py.
77	logging.info(sys.executable)
78	logging.info(str(sys.argv))
79	from sas import sasview as sasview
80	app_path = os.path.dirname(sasview.__file__)
81	logging.info("Using application path: %s", app_path)
82	return app_path
83
84	def get_user_directory():
85	"""
86	Returns the user's home directory
87	"""
88	userdir = os.path.join(os.path.expanduser("~"), ".sasview")
89	if not os.path.isdir(userdir):
90	os.makedirs(userdir)
91	return userdir
92
93	def _find_local_config(file, path):
94	"""
95	Find configuration file for the current application
96	"""
97	config_module = None
98	fObj = None
99	try:
100	fObj, path_config, descr = imp.find_module(file, [path])
101	config_module = imp.load_module(file, fObj, path_config, descr)
102	except:
103	logging.error("Error loading %s/%s: %s" % (path, file, sys.exc_value))
104	finally:
105	if fObj is not None:
106	fObj.close()
107	logging.info("GuiManager loaded %s/%s" % (path, file))
108	return config_module
109
110	# Get APP folder
111	PATH_APP = get_app_dir()
112	DATAPATH = PATH_APP
113
114	# GUI always starts from the App folder
115	#os.chdir(PATH_APP)
116	# Read in the local config, which can either be with the main
117	# application or in the installation directory
118	config = _find_local_config('local_config', PATH_APP)
119	if config is None:
120	config = _find_local_config('local_config', os.getcwd())
121	if config is None:
122	# Didn't find local config, load the default
123	import sas.sasgui.guiframe.config as config
124	logging.info("using default local_config")
125	else:
126	logging.info("found local_config in %s" % os.getcwd())
127	else:
128	logging.info("found local_config in %s" % PATH_APP)
129
130	from sas.sasgui.guiframe.customdir import SetupCustom
131	c_conf_dir = SetupCustom().setup_dir(PATH_APP)
132	custom_config = _find_local_config('custom_config', c_conf_dir)
133	if custom_config is None:
134	custom_config = _find_local_config('custom_config', os.getcwd())
135	if custom_config is None:
136	msgConfig = "Custom_config file was not imported"
137	logging.info(msgConfig)
138	else:
139	logging.info("using custom_config in %s" % os.getcwd())
140	else:
141	logging.info("using custom_config from %s" % c_conf_dir)
142
143	#read some constants from config
144	APPLICATION_STATE_EXTENSION = config.APPLICATION_STATE_EXTENSION
145	APPLICATION_NAME = config.__appname__
146	SPLASH_SCREEN_PATH = config.SPLASH_SCREEN_PATH
147	WELCOME_PANEL_ON = config.WELCOME_PANEL_ON
148	SPLASH_SCREEN_WIDTH = config.SPLASH_SCREEN_WIDTH
149	SPLASH_SCREEN_HEIGHT = config.SPLASH_SCREEN_HEIGHT
150	SS_MAX_DISPLAY_TIME = config.SS_MAX_DISPLAY_TIME
151	if not WELCOME_PANEL_ON:
152	WELCOME_PANEL_SHOW = False
153	else:
154	WELCOME_PANEL_SHOW = True
155	try:
156	DATALOADER_SHOW = custom_config.DATALOADER_SHOW
157	TOOLBAR_SHOW = custom_config.TOOLBAR_SHOW
158	FIXED_PANEL = custom_config.FIXED_PANEL
159	if WELCOME_PANEL_ON:
160	WELCOME_PANEL_SHOW = custom_config.WELCOME_PANEL_SHOW
161	PLOPANEL_WIDTH = custom_config.PLOPANEL_WIDTH
162	DATAPANEL_WIDTH = custom_config.DATAPANEL_WIDTH
163	GUIFRAME_WIDTH = custom_config.GUIFRAME_WIDTH
164	GUIFRAME_HEIGHT = custom_config.GUIFRAME_HEIGHT
165	CONTROL_WIDTH = custom_config.CONTROL_WIDTH
166	CONTROL_HEIGHT = custom_config.CONTROL_HEIGHT
167	DEFAULT_PERSPECTIVE = custom_config.DEFAULT_PERSPECTIVE
168	CLEANUP_PLOT = custom_config.CLEANUP_PLOT
169	# custom open_path
170	open_folder = custom_config.DEFAULT_OPEN_FOLDER
171	if open_folder != None and os.path.isdir(open_folder):
172	DEFAULT_OPEN_FOLDER = os.path.abspath(open_folder)
173	else:
174	DEFAULT_OPEN_FOLDER = PATH_APP
175	except:
176	DATALOADER_SHOW = True
177	TOOLBAR_SHOW = True
178	FIXED_PANEL = True
179	WELCOME_PANEL_SHOW = False
180	PLOPANEL_WIDTH = config.PLOPANEL_WIDTH
181	DATAPANEL_WIDTH = config.DATAPANEL_WIDTH
182	GUIFRAME_WIDTH = config.GUIFRAME_WIDTH
183	GUIFRAME_HEIGHT = config.GUIFRAME_HEIGHT
184	CONTROL_WIDTH = -1
185	CONTROL_HEIGHT = -1
186	DEFAULT_PERSPECTIVE = None
187	CLEANUP_PLOT = False
188	DEFAULT_OPEN_FOLDER = PATH_APP
189
190	DEFAULT_STYLE = config.DEFAULT_STYLE
191
192	PLUGIN_STATE_EXTENSIONS = config.PLUGIN_STATE_EXTENSIONS
193	OPEN_SAVE_MENU = config.OPEN_SAVE_PROJECT_MENU
194	VIEW_MENU = config.VIEW_MENU
195	EDIT_MENU = config.EDIT_MENU
196	extension_list = []
197	if APPLICATION_STATE_EXTENSION is not None:
198	extension_list.append(APPLICATION_STATE_EXTENSION)
199	EXTENSIONS = PLUGIN_STATE_EXTENSIONS + extension_list
200	try:
201	PLUGINS_WLIST = '\|'.join(config.PLUGINS_WLIST)
202	except:
203	PLUGINS_WLIST = ''
204	APPLICATION_WLIST = config.APPLICATION_WLIST
205	IS_WIN = True
206	IS_LINUX = False
207	CLOSE_SHOW = True
208	TIME_FACTOR = 2
209	MDI_STYLE = wx.DEFAULT_FRAME_STYLE
210	NOT_SO_GRAPH_LIST = ["BoxSum"]
211	PARENT_FRAME = wx.MDIParentFrame
212	CHILD_FRAME = wx.MDIChildFrame
213	if sys.platform.count("win32") < 1:
214	IS_WIN = False
215	TIME_FACTOR = 2
216	if int(str(wx.__version__).split('.')[0]) == 2:
217	if int(str(wx.__version__).split('.')[1]) < 9:
218	CLOSE_SHOW = False
219	if sys.platform.count("darwin") < 1:
220	IS_LINUX = True
221	PARENT_FRAME = wx.Frame
222	CHILD_FRAME = wx.Frame
223
224	class ViewerFrame(PARENT_FRAME):
225	"""
226	Main application frame
227	"""
228
229	def __init__(self, parent, title,
230	size=(GUIFRAME_WIDTH, GUIFRAME_HEIGHT),
231	gui_style=DEFAULT_STYLE,
232	style=wx.DEFAULT_FRAME_STYLE,
233	pos=wx.DefaultPosition):
234	"""
235	Initialize the Frame object
236	"""
237	PARENT_FRAME.__init__(self, parent=parent, title=title, pos=pos, size=size)
238	# title
239	self.title = title
240	self.__gui_style = gui_style
241	path = os.path.dirname(__file__)
242	temp_path = os.path.join(path, 'images')
243	ico_file = os.path.join(temp_path, 'ball.ico')
244	if os.path.isfile(ico_file):
245	self.SetIcon(wx.Icon(ico_file, wx.BITMAP_TYPE_ICO))
246	else:
247	temp_path = os.path.join(os.getcwd(), 'images')
248	ico_file = os.path.join(temp_path, 'ball.ico')
249	if os.path.isfile(ico_file):
250	self.SetIcon(wx.Icon(ico_file, wx.BITMAP_TYPE_ICO))
251	else:
252	ico_file = os.path.join(os.path.dirname(os.path.sys.path[0]),
253	'images', 'ball.ico')
254	if os.path.isfile(ico_file):
255	self.SetIcon(wx.Icon(ico_file, wx.BITMAP_TYPE_ICO))
256	self.path = PATH_APP
257	self.application_name = APPLICATION_NAME
258	## Application manager
259	self._input_file = None
260	self.app_manager = None
261	self._mgr = None
262	#add current perpsective
263	self._current_perspective = None
264	self._plotting_plugin = None
265	self._data_plugin = None
266	#Menu bar and item
267	self._menubar = None
268	self._file_menu = None
269	self._data_menu = None
270	self._view_menu = None
271	self._data_panel_menu = None
272	self._help_menu = None
273	self._tool_menu = None
274	self._applications_menu_pos = -1
275	self._applications_menu_name = None
276	self._applications_menu = None
277	self._edit_menu = None
278	self._toolbar_menu = None
279	self._save_appl_menu = None
280	#tool bar
281	self._toolbar = None
282	# Status bar
283	self.sb = None
284	# number of plugins
285	self._num_perspectives = 0
286	# plot duck cleanup option
287	self.cleanup_plots = CLEANUP_PLOT
288	## Find plug-ins
289	# Modify this so that we can specify the directory to look into
290	self.plugins = []
291	#add local plugin
292	self.plugins += self._get_local_plugins()
293	self.plugins += self._find_plugins()
294	## List of panels
295	self.panels = {}
296	# List of plot panels
297	self.plot_panels = {}
298	# default Graph number fot the plotpanel caption
299	self.graph_num = 0
300
301	# Default locations
302	self._default_save_location = DEFAULT_OPEN_FOLDER
303	# Welcome panel
304	self.defaultPanel = None
305	self.welcome_panel_class = None
306	#panel on focus
307	self.panel_on_focus = None
308	#control_panel on focus
309	self.cpanel_on_focus = None
310
311	self.loader = Loader()
312	#data manager
313	self.batch_on = False
314	from sas.sasgui.guiframe.data_manager import DataManager
315	self._data_manager = DataManager()
316	self._data_panel = None#DataPanel(parent=self)
317	if self.panel_on_focus is not None:
318	self._data_panel.set_panel_on_focus(self.panel_on_focus.window_caption)
319	# list of plot panels in schedule to full redraw
320	self.schedule = False
321	#self.callback = True
322	self._idle_count = 0
323	self.schedule_full_draw_list = []
324	self.idletimer = wx.CallLater(TIME_FACTOR, self._onDrawIdle)
325
326	self.batch_frame = GridFrame(parent=self)
327	self.batch_frame.Hide()
328	self.on_batch_selection(event=None)
329	self.add_icon()
330
331	# Register the close event so it calls our own method
332	wx.EVT_CLOSE(self, self.WindowClose)
333	# Register to status events
334	self.Bind(EVT_STATUS, self._on_status_event)
335	#Register add extra data on the same panel event on load
336	self.Bind(EVT_PANEL_ON_FOCUS, self.set_panel_on_focus)
337	self.Bind(EVT_APPEND_BOOKMARK, self.append_bookmark)
338	self.Bind(EVT_NEW_LOAD_DATA, self.on_load_data)
339	self.Bind(EVT_NEW_BATCH, self.on_batch_selection)
340	self.Bind(EVT_NEW_COLOR, self.on_color_selection)
341	self.Bind(EVT_CATEGORY, self.on_change_categories)
342	self.setup_custom_conf()
343	# Preferred window size
344	self._window_width, self._window_height = size
345
346	def add_icon(self):
347	"""
348	get list of child and attempt to add the default icon
349	"""
350
351	list_children = self.GetChildren()
352	for frame in list_children:
353	self.put_icon(frame)
354
355	def put_icon(self, frame):
356	"""
357	Put icon on the tap of a panel
358	"""
359	if hasattr(frame, "IsIconized"):
360	if not frame.IsIconized():
361	try:
362	icon = self.GetIcon()
363	frame.SetIcon(icon)
364	except:
365	logging.error("ViewerFrame.put_icon: could not set icon")
366
367	def get_client_size(self):
368	"""
369	return client size tuple
370	"""
371	width, height = self.GetClientSizeTuple()
372	height -= 45
373	# Adjust toolbar height
374	toolbar = self.GetToolBar()
375	if toolbar != None:
376	_, tb_h = toolbar.GetSizeTuple()
377	height -= tb_h
378	return width, height
379
380	def on_change_categories(self, evt):
381	# ILL
382	fitpanel = None
383	for item in self.plugins:
384	if hasattr(item, "get_panels"):
385	if hasattr(item, "fit_panel"):
386	fitpanel = item.fit_panel
387
388	if fitpanel != None:
389	for i in range(0, fitpanel.GetPageCount()):
390	fitpanel.GetPage(i)._populate_listbox()
391
392	def on_set_batch_result(self, data_outputs, data_inputs=None,
393	plugin_name=""):
394	"""
395	Display data into a grid in batch mode and show the grid
396	"""
397	t = time.localtime(time.time())
398	time_str = time.strftime("%b %d %H;%M of %Y", t)
399	details = "File Generated by %s : %s" % (APPLICATION_NAME,
400	str(plugin_name))
401	details += "on %s.\n" % time_str
402	ext = ".csv"
403	file_name = "Batch_" + str(plugin_name) + "_" + time_str + ext
404	file_name = self._default_save_location + str(file_name)
405
406	self.open_with_localapp(file_name=file_name,
407	details=details,
408	data_inputs=data_inputs,
409	data_outputs=data_outputs)
410
411	def open_with_localapp(self, data_inputs=None, details="", file_name=None,
412	data_outputs=None):
413	"""
414	Display value of data into the application grid
415	:param data: dictionary of string and list of items
416	"""
417	self.batch_frame.set_data(data_inputs=data_inputs,
418	data_outputs=data_outputs,
419	details=details,
420	file_name=file_name)
421	self.show_batch_frame(None)
422
423	def on_read_batch_tofile(self, base):
424	"""
425	Open a file dialog , extract the file to read and display values
426	into a grid
427	"""
428	path = None
429	if self._default_save_location == None:
430	self._default_save_location = os.getcwd()
431	wildcard = "(.csv; .txt)\|.csv; .txt"
432	dlg = wx.FileDialog(base,
433	"Choose a file",
434	self._default_save_location, "",
435	wildcard)
436	if dlg.ShowModal() == wx.ID_OK:
437	path = dlg.GetPath()
438	if path is not None:
439	self._default_save_location = os.path.dirname(path)
440	dlg.Destroy()
441	try:
442	self.read_batch_tofile(file_name=path)
443	except:
444	msg = "Error occurred when reading the file; %s\n" % path
445	msg += "%s\n" % sys.exc_value
446	wx.PostEvent(self, StatusEvent(status=msg,
447	info="error"))
448
449	def read_batch_tofile(self, file_name):
450	"""
451	Extract value from file name and Display them into a grid
452	"""
453	if file_name is None or file_name.strip() == "":
454	return
455	data = {}
456	fd = open(file_name, 'r')
457	_, ext = os.path.splitext(file_name)
458	separator = None
459	if ext.lower() == ".csv":
460	separator = ","
461	fd_buffer = fd.read()
462	lines = fd_buffer.split('\n')
463	fd.close()
464	column_names_line = ""
465	index = None
466	details = ""
467	for index in range(len(lines)):
468	line = lines[index]
469	line.strip()
470	count = 0
471	if separator == None:
472	line.replace('\t', ' ')
473	#found the first line containing the label
474	col_name_toks = line.split()
475	for item in col_name_toks:
476	if item.strip() != "":
477	count += 1
478	else:
479	line = " "
480	elif line.find(separator) != -1:
481	if line.count(separator) >= 2:
482	#found the first line containing the label
483	col_name_toks = line.split(separator)
484	for item in col_name_toks:
485	if item.strip() != "":
486	count += 1
487	else:
488	details += line
489	if count >= 2:
490	column_names_line = line
491	break
492
493	if column_names_line.strip() == "" or index is None:
494	return
495
496	col_name_toks = column_names_line.split(separator)
497	c_index = 0
498	for col_index in range(len(col_name_toks)):
499	c_name = col_name_toks[col_index]
500	if c_name.strip() != "":
501	# distinguish between column name and value
502	try:
503	float(c_name)
504	col_name = "Column %s" % str(col_index + 1)
505	index_min = index
506	except:
507	col_name = c_name
508	index_min = index + 1
509	data[col_name] = [lines[row].split(separator)[c_index]
510	for row in range(index_min, len(lines) - 1)]
511	c_index += 1
512
513	self.open_with_localapp(data_outputs=data, data_inputs=None,
514	file_name=file_name, details=details)
515
516	def write_batch_tofile(self, data, file_name, details=""):
517	"""
518	Helper to write result from batch into cvs file
519	"""
520	self._default_save_location = os.path.dirname(file_name)
521	name = os.path.basename(file_name)
522	if data is None or file_name is None or file_name.strip() == "":
523	return
524	_, ext = os.path.splitext(name)
525	try:
526	fd = open(file_name, 'w')
527	except:
528	# On Permission denied: IOError
529	temp_dir = get_user_directory()
530	temp_file_name = os.path.join(temp_dir, name)
531	fd = open(temp_file_name, 'w')
532	separator = "\t"
533	if ext.lower() == ".csv":
534	separator = ","
535	fd.write(str(details))
536	for col_name in data.keys():
537	fd.write(str(col_name))
538	fd.write(separator)
539	fd.write('\n')
540	max_list = [len(value) for value in data.values()]
541	if len(max_list) == 0:
542	return
543	max_index = max(max_list)
544	index = 0
545	while index < max_index:
546	for value_list in data.values():
547	if index < len(value_list):
548	fd.write(str(value_list[index]))
549	fd.write(separator)
550	else:
551	fd.write('')
552	fd.write(separator)
553	fd.write('\n')
554	index += 1
555	fd.close()
556
557	def open_with_externalapp(self, data, file_name, details=""):
558	"""
559	Display data in the another application , by default Excel
560	"""
561	if not os.path.exists(file_name):
562	self.write_batch_tofile(data=data, file_name=file_name,
563	details=details)
564	try:
565	from win32com.client import Dispatch
566	excel_app = Dispatch('Excel.Application')
567	excel_app.Workbooks.Open(file_name)
568	excel_app.Visible = 1
569	except:
570	msg = "Error occured when calling Excel.\n"
571	msg += "Check that Excel installed in this machine or \n"
572	msg += "check that %s really exists.\n" % str(file_name)
573	wx.PostEvent(self, StatusEvent(status=msg,
574	info="error"))
575
576	def on_batch_selection(self, event=None):
577	"""
578	:param event: contains parameter enable. When enable is set to True
579	the application is in Batch mode otherwise the application is
580	in Single mode.
581	"""
582	if event is not None:
583	self.batch_on = event.enable
584	for plug in self.plugins:
585	plug.set_batch_selection(self.batch_on)
586
587	def on_color_selection(self, event):
588	"""
589	:param event: contains parameters for id and color
590	"""
591	color, event_id = event.color, event.id
592	for plug in self.plugins:
593	plug.add_color(color, event_id)
594
595	def setup_custom_conf(self):
596	"""
597	Set up custom configuration if exists
598	"""
599	if custom_config == None:
600	return
601
602	if not FIXED_PANEL:
603	self.__gui_style &= (~GUIFRAME.FIXED_PANEL)
604	self.__gui_style \|= GUIFRAME.FLOATING_PANEL
605
606	if not DATALOADER_SHOW:
607	self.__gui_style &= (~GUIFRAME.MANAGER_ON)
608
609	if not TOOLBAR_SHOW:
610	self.__gui_style &= (~GUIFRAME.TOOLBAR_ON)
611
612	if WELCOME_PANEL_SHOW:
613	self.__gui_style \|= GUIFRAME.WELCOME_PANEL_ON
614
615	def set_custom_default_perspective(self):
616	"""
617	Set default starting perspective
618	"""
619	if custom_config == None:
620	return
621	for plugin in self.plugins:
622	try:
623	if plugin.sub_menu == DEFAULT_PERSPECTIVE:
624
625	plugin.on_perspective(event=None)
626	frame = plugin.get_frame()
627	frame.Show(True)
628	#break
629	else:
630	frame = plugin.get_frame()
631	frame.Show(False)
632	except:
633	pass
634	return
635
636	def on_load_data(self, event):
637	"""
638	received an event to trigger load from data plugin
639	"""
640	if self._data_plugin is not None:
641	self._data_plugin.load_data(event)
642
643	def get_current_perspective(self):
644	"""
645	return the current perspective
646	"""
647	return self._current_perspective
648
649	def get_save_location(self):
650	"""
651	return the _default_save_location
652	"""
653	return self._default_save_location
654
655	def set_input_file(self, input_file):
656	"""
657	:param input_file: file to read
658	"""
659	self._input_file = input_file
660
661	def get_data_manager(self):
662	"""
663	return the data manager.
664	"""
665	return self._data_manager
666
667	def get_toolbar(self):
668	"""
669	return the toolbar.
670	"""
671	return self._toolbar
672
673	def set_panel_on_focus(self, event):
674	"""
675	Store reference to the last panel on focus
676	update the toolbar if available
677	update edit menu if available
678	"""
679	if event != None:
680	self.panel_on_focus = event.panel
681	if self.panel_on_focus is not None:
682	#Disable save application if the current panel is in batch mode
683	flag = self.panel_on_focus.get_save_flag()
684	if self._save_appl_menu != None:
685	self._save_appl_menu.Enable(flag)
686
687	if self.panel_on_focus not in self.plot_panels.values():
688	for ID in self.panels.keys():
689	if self.panel_on_focus != self.panels[ID]:
690	self.panels[ID].on_kill_focus(None)
691
692	if self._data_panel is not None and \
693	self.panel_on_focus is not None:
694	self.set_panel_on_focus_helper()
695	#update toolbar
696	self._update_toolbar_helper()
697	#update edit menu
698	self.enable_edit_menu()
699
700	def disable_app_menu(self, p_panel=None):
701	"""
702	Disables all menus in the menubar
703	"""
704	return
705
706	def send_focus_to_datapanel(self, name):
707	"""
708	Send focusing on ID to data explorer
709	"""
710	if self._data_panel != None:
711	self._data_panel.set_panel_on_focus(name)
712
713	def set_panel_on_focus_helper(self):
714	"""
715	Helper for panel on focus with data_panel
716	"""
717	caption = self.panel_on_focus.window_caption
718	self.send_focus_to_datapanel(caption)
719	#update combo
720	if self.panel_on_focus in self.plot_panels.values():
721	combo = self._data_panel.cb_plotpanel
722	combo_title = str(self.panel_on_focus.window_caption)
723	combo.SetStringSelection(combo_title)
724	combo.SetToolTip(wx.ToolTip(combo_title))
725	elif self.panel_on_focus != self._data_panel:
726	cpanel = self.panel_on_focus
727	if self.cpanel_on_focus != cpanel:
728	cpanel.on_tap_focus()
729	self.cpanel_on_focus = self.panel_on_focus
730
731	def reset_bookmark_menu(self, panel):
732	"""
733	Reset Bookmark menu list
734
735	: param panel: a control panel or tap where the bookmark is
736	"""
737	cpanel = panel
738	if self._toolbar != None and cpanel._bookmark_flag:
739	for item in self._toolbar.get_bookmark_items():
740	self._toolbar.remove_bookmark_item(item)
741	self._toolbar.add_bookmark_default()
742	pos = 0
743	for bitem in cpanel.popUpMenu.GetMenuItems():
744	pos += 1
745	if pos < 3:
746	continue
747	id = bitem.GetId()
748	label = bitem.GetLabel()
749	self._toolbar.append_bookmark_item(id, label)
750	wx.EVT_MENU(self, id, cpanel._back_to_bookmark)
751	self._toolbar.Realize()
752
753	def build_gui(self):
754	"""
755	Build the GUI by setting up the toolbar, menu and layout.
756	"""
757	# set tool bar
758	self._setup_tool_bar()
759
760	# Create the menu bar. To be filled later.
761	# WX 3.0 needs us to create the menu bar first.
762	self._menubar = wx.MenuBar()
763	if wx.VERSION_STRING >= '3.0.0.0':
764	self.SetMenuBar(self._menubar)
765	self._add_menu_file()
766	self._add_menu_edit()
767	self._add_menu_view()
768	self._add_menu_tool()
769	# Set up the layout
770	self._setup_layout()
771	self._add_menu_application()
772
773	# Set up the menu
774	self._add_current_plugin_menu()
775	self._add_help_menu()
776	# Append item from plugin under menu file if necessary
777	self._populate_file_menu()
778
779	if not wx.VERSION_STRING >= '3.0.0.0':
780	self.SetMenuBar(self._menubar)
781
782	try:
783	self.load_from_cmd(self._input_file)
784	except:
785	msg = "%s Cannot load file %s\n" % (str(APPLICATION_NAME),
786	str(self._input_file))
787	msg += str(sys.exc_value) + '\n'
788	logging.error(msg)
789	if self._data_panel is not None and len(self.plugins) > 0:
790	self._data_panel.fill_cbox_analysis(self.plugins)
791	self.post_init()
792	# Set Custom default
793	self.set_custom_default_perspective()
794	# Set up extra custom tool menu
795	self._setup_extra_custom()
796	self._check_update(None)
797
798	def _setup_extra_custom(self):
799	"""
800	Set up toolbar and welcome view if needed
801	"""
802	style = self.__gui_style & GUIFRAME.TOOLBAR_ON
803	if (style == GUIFRAME.TOOLBAR_ON) & (not self._toolbar.IsShown()):
804	self._on_toggle_toolbar()
805
806	# Set Custom deafult start page
807	welcome_style = self.__gui_style & GUIFRAME.WELCOME_PANEL_ON
808	if welcome_style == GUIFRAME.WELCOME_PANEL_ON:
809	self.show_welcome_panel(None)
810
811	def _setup_layout(self):
812	"""
813	Set up the layout
814	"""
815	# Status bar
816	from sas.sasgui.guiframe.gui_statusbar import StatusBar
817	self.sb = StatusBar(self, wx.ID_ANY)
818	self.SetStatusBar(self.sb)
819	# Load panels
820	self._load_panels()
821
822	def SetStatusText(self, args, *kwds):
823	"""
824	"""
825	number = self.sb.get_msg_position()
826	wx.Frame.SetStatusText(self, number=number, args, *kwds)
827
828	def PopStatusText(self, args, *kwds):
829	"""
830	"""
831	field = self.sb.get_msg_position()
832	wx.Frame.PopStatusText(self, field=field)
833
834	def PushStatusText(self, args, *kwds):
835	"""
836	.. todo:: No message is passed. What is this supposed to do?
837	"""
838	field = self.sb.get_msg_position()
839	wx.Frame.PushStatusText(self, field=field,
840	string="FIXME - PushStatusText called without text")
841
842	def add_perspective(self, plugin):
843	"""
844	Add a perspective if it doesn't already
845	exist.
846	"""
847	self._num_perspectives += 1
848	is_loaded = False
849	for item in self.plugins:
850	item.set_batch_selection(self.batch_on)
851	if plugin.__class__ == item.__class__:
852	msg = "Plugin %s already loaded" % plugin.sub_menu
853	logging.info(msg)
854	is_loaded = True
855	if not is_loaded:
856	self.plugins.append(plugin)
857	msg = "Plugin %s appended" % plugin.sub_menu
858	logging.info(msg)
859
860	def _get_local_plugins(self):
861	"""
862	get plugins local to guiframe and others
863	"""
864	plugins = []
865	#import guiframe local plugins
866	#check if the style contain guiframe.dataloader
867	style1 = self.__gui_style & GUIFRAME.DATALOADER_ON
868	style2 = self.__gui_style & GUIFRAME.PLOTTING_ON
869	if style1 == GUIFRAME.DATALOADER_ON:
870	try:
871	from sas.sasgui.guiframe.local_perspectives.data_loader import data_loader
872	self._data_plugin = data_loader.Plugin()
873	plugins.append(self._data_plugin)
874	except:
875	msg = "ViewerFrame._get_local_plugins:"
876	msg += "cannot import dataloader plugin.\n %s" % sys.exc_value
877	logging.error(msg)
878	if style2 == GUIFRAME.PLOTTING_ON:
879	try:
880	from sas.sasgui.guiframe.local_perspectives.plotting import plotting
881	self._plotting_plugin = plotting.Plugin()
882	plugins.append(self._plotting_plugin)
883	except:
884	msg = "ViewerFrame._get_local_plugins:"
885	msg += "cannot import plotting plugin.\n %s" % sys.exc_value
886	logging.error(msg)
887
888	return plugins
889
890	def _find_plugins(self, dir="perspectives"):
891	"""
892	Find available perspective plug-ins
893
894	:param dir: directory in which to look for plug-ins
895
896	:returns: list of plug-ins
897
898	"""
899	plugins = []
900	# Go through files in panels directory
901	try:
902	if os.path.isdir(dir):
903	file_list = os.listdir(dir)
904	else:
905	file_list = []
906	## the default panel is the panel is the last plugin added
907	for item in file_list:
908	toks = os.path.splitext(os.path.basename(item))
909	name = ''
910	if not toks[0] == '__init__':
911	if toks[1] == '.py' or toks[1] == '':
912	name = toks[0]
913	#check the validity of the module name parsed
914	#before trying to import it
915	if name is None or name.strip() == '':
916	continue
917	path = [os.path.abspath(dir)]
918	file = None
919	try:
920	if toks[1] == '':
921	mod_path = '.'.join([dir, name])
922	module = __import__(mod_path, globals(),
923	locals(), [name])
924	else:
925	(file, path, info) = imp.find_module(name, path)
926	module = imp.load_module(name, file, item, info)
927	if hasattr(module, "PLUGIN_ID"):
928	try:
929	plugins.append(module.Plugin())
930	msg = "Found plug-in: %s" % module.PLUGIN_ID
931	logging.info(msg)
932	except:
933	msg = "Error accessing PluginPanel"
934	msg += " in %s\n %s" % (name, sys.exc_value)
935	config.printEVT(msg)
936	except:
937	msg = "ViewerFrame._find_plugins: %s" % sys.exc_value
938	logging.error(msg)
939	finally:
940	if not file == None:
941	file.close()
942	except:
943	# Should raise and catch at a higher level and
944	# display error on status bar
945	logging.error(sys.exc_value)
946
947	return plugins
948
949	def _get_panels_size(self, p):
950	"""
951	find the proper size of the current panel
952	get the proper panel width and height
953	"""
954	self._window_width, self._window_height = self.get_client_size()
955	## Default size
956	if DATAPANEL_WIDTH < 0:
957	panel_width = int(self._window_width * 0.25)
958	else:
959	panel_width = DATAPANEL_WIDTH
960	panel_height = int(self._window_height)
961	if self._data_panel is not None and (p == self._data_panel):
962	return panel_width, panel_height
963	if hasattr(p, "CENTER_PANE") and p.CENTER_PANE:
964	panel_width = self._window_width * 0.45
965	if CONTROL_WIDTH > 0:
966	panel_width = CONTROL_WIDTH
967	if CONTROL_HEIGHT > 0:
968	panel_height = CONTROL_HEIGHT
969	return panel_width, panel_height
970	elif p == self.defaultPanel:
971	return self._window_width, panel_height
972	return panel_width, panel_height
973
974	def _load_panels(self):
975	"""
976	Load all panels in the panels directory
977	"""
978	# Look for plug-in panels
979	panels = []
980	if wx.VERSION_STRING >= '3.0.0.0':
981	mac_pos_y = 85
982	else:
983	mac_pos_y = 40
984	for item in self.plugins:
985	if hasattr(item, "get_panels"):
986	ps = item.get_panels(self)
987	panels.extend(ps)
988
989	# Set up welcome panel
990	# TODO: this needs serious simplification
991	if self.welcome_panel_class is not None:
992	welcome_panel = MDIFrame(self, None, 'None', (100, 200))
993	self.defaultPanel = self.welcome_panel_class(welcome_panel, -1, style=wx.RAISED_BORDER)
994	welcome_panel.set_panel(self.defaultPanel)
995	self.defaultPanel.set_frame(welcome_panel)
996	welcome_panel.Show(False)
997
998	self.panels["default"] = self.defaultPanel
999	size_t_bar = 70
1000	if IS_LINUX:
1001	size_t_bar = 115
1002	if self.defaultPanel is not None:
1003	w, h = self._get_panels_size(self.defaultPanel)
1004	frame = self.defaultPanel.get_frame()
1005	frame.SetSize((self._window_width, self._window_height))
1006	if not IS_WIN:
1007	frame.SetPosition((0, mac_pos_y + size_t_bar))
1008	frame.Show(True)
1009	#add data panel
1010	win = MDIFrame(self, None, 'None', (100, 200))
1011	data_panel = DataPanel(parent=win, id=-1)
1012	win.set_panel(data_panel)
1013	self.panels["data_panel"] = data_panel
1014	self._data_panel = data_panel
1015	d_panel_width, h = self._get_panels_size(self._data_panel)
1016	win.SetSize((d_panel_width, h))
1017	is_visible = self.__gui_style & GUIFRAME.MANAGER_ON == GUIFRAME.MANAGER_ON
1018	if IS_WIN:
1019	win.SetPosition((0, 0))
1020	else:
1021	win.SetPosition((0, mac_pos_y + size_t_bar))
1022	win.Show(is_visible)
1023	# Add the panels to the AUI manager
1024	for panel_class in panels:
1025	frame = panel_class.get_frame()
1026	wx_id = wx.NewId()
1027	# Check whether we need to put this panel in the center pane
1028	if hasattr(panel_class, "CENTER_PANE") and panel_class.CENTER_PANE:
1029	w, h = self._get_panels_size(panel_class)
1030	if panel_class.CENTER_PANE:
1031	self.panels[str(wx_id)] = panel_class
1032	_, pos_y = frame.GetPositionTuple()
1033	frame.SetPosition((d_panel_width + 1, pos_y))
1034	frame.SetSize((w, h))
1035	frame.Show(False)
1036	elif panel_class == self._data_panel:
1037	panel_class.frame.Show(is_visible)
1038	continue
1039	else:
1040	self.panels[str(wx_id)] = panel_class
1041	frame.SetSize((w, h))
1042	frame.Show(False)
1043	if IS_WIN:
1044	frame.SetPosition((d_panel_width + 1, 0))
1045	else:
1046	frame.SetPosition((d_panel_width + 1, mac_pos_y + size_t_bar))
1047
1048	if not IS_WIN:
1049	win_height = mac_pos_y
1050	if IS_LINUX:
1051	if wx.VERSION_STRING >= '3.0.0.0':
1052	win_height = mac_pos_y + 10
1053	else:
1054	win_height = mac_pos_y + 55
1055	self.SetMaxSize((-1, win_height))
1056	else:
1057	self.SetSize((self._window_width, win_height))
1058
1059	def update_data(self, prev_data, new_data):
1060	"""
1061	Update the data.
1062	"""
1063	prev_id, data_state = self._data_manager.update_data( \
1064	prev_data=prev_data, new_data=new_data)
1065
1066	self._data_panel.remove_by_id(prev_id)
1067	self._data_panel.load_data_list(data_state)
1068
1069	def update_theory(self, data_id, theory, state=None):
1070	"""
1071	Update the theory
1072	"""
1073	data_state = self._data_manager.update_theory(data_id=data_id,
1074	theory=theory,
1075	state=state)
1076	wx.CallAfter(self._data_panel.load_data_list, data_state)
1077
1078	def onfreeze(self, theory_id):
1079	"""
1080	Saves theory/model and passes to data loader.
1081
1082	..warning:: This seems to be the exact same code as the next
1083	function called simply freeze. This probably needs fixing
1084	"""
1085	data_state_list = self._data_manager.freeze(theory_id)
1086	self._data_panel.load_data_list(list=data_state_list)
1087	for data_state in data_state_list.values():
1088	new_plot = data_state.get_data()
1089
1090	wx.PostEvent(self, NewPlotEvent(plot=new_plot,
1091	title=new_plot.title))
1092
1093	def freeze(self, data_id, theory_id):
1094	"""
1095	Saves theory/model and passes to data loader.
1096
1097	..warning:: This seems to be the exact same code as the next
1098	function called simply freeze. This probably needs fixing
1099	"""
1100	data_state_list = self._data_manager.freeze_theory(data_id=data_id,
1101	theory_id=theory_id)
1102	self._data_panel.load_data_list(list=data_state_list)
1103	for data_state in data_state_list.values():
1104	new_plot = data_state.get_data()
1105	wx.PostEvent(self, NewPlotEvent(plot=new_plot,
1106	title=new_plot.title))
1107
1108	def delete_data(self, data):
1109	"""
1110	Delete the data.
1111	"""
1112	self._current_perspective.delete_data(data)
1113
1114
1115	def get_context_menu(self, plotpanel=None):
1116	"""
1117	Get the context menu items made available
1118	by the different plug-ins.
1119	This function is used by the plotting module
1120	"""
1121	if plotpanel is None:
1122	return
1123	menu_list = []
1124	for item in self.plugins:
1125	menu_list.extend(item.get_context_menu(plotpanel=plotpanel))
1126	return menu_list
1127
1128	def get_current_context_menu(self, plotpanel=None):
1129	"""
1130	Get the context menu items made available
1131	by the current plug-in.
1132	This function is used by the plotting module
1133	"""
1134	if plotpanel is None:
1135	return
1136	menu_list = []
1137	item = self._current_perspective
1138	if item != None:
1139	menu_list.extend(item.get_context_menu(plotpanel=plotpanel))
1140	return menu_list
1141
1142	def on_panel_close(self, event):
1143	"""
1144	Gets called when the close event for a panel runs.
1145	This will check which panel has been closed and
1146	delete it.
1147	"""
1148	frame = event.GetEventObject()
1149	for ID in self.plot_panels.keys():
1150	if self.plot_panels[ID].window_name == frame.name:
1151	self.disable_app_menu(self.plot_panels[ID])
1152	self.delete_panel(ID)
1153	break
1154	self.cpanel_on_focus.SetFocus()
1155
1156
1157	def popup_panel(self, p):
1158	"""
1159	Add a panel object to the AUI manager
1160
1161	:param p: panel object to add to the AUI manager
1162
1163	:returns: ID of the event associated with the new panel [int]
1164
1165	"""
1166	ID = wx.NewId()
1167	self.panels[str(ID)] = p
1168	## Check and set the size
1169	if PLOPANEL_WIDTH < 0:
1170	p_panel_width = int(self._window_width * 0.45)
1171	else:
1172	p_panel_width = PLOPANEL_WIDTH
1173	p_panel_height = int(p_panel_width * 0.76)
1174	p.frame.SetSize((p_panel_width, p_panel_height))
1175	self.graph_num += 1
1176	if p.window_caption.split()[0] in NOT_SO_GRAPH_LIST:
1177	windowcaption = p.window_caption
1178	else:
1179	windowcaption = 'Graph'
1180	windowname = p.window_name
1181
1182	# Append nummber
1183	captions = self._get_plotpanel_captions()
1184	# FIXME: Fix this awful loop
1185	while (1):
1186	caption = windowcaption + '%s' % str(self.graph_num)
1187	if caption not in captions:
1188	break
1189	self.graph_num += 1
1190	# protection from forever-loop: max num = 1000
1191	if self.graph_num > 1000:
1192	break
1193	if p.window_caption.split()[0] not in NOT_SO_GRAPH_LIST:
1194	p.window_caption = caption
1195	p.window_name = windowname + str(self.graph_num)
1196
1197	p.frame.SetTitle(p.window_caption)
1198	p.frame.name = p.window_name
1199	if not IS_WIN:
1200	p.frame.Center()
1201	x_pos, _ = p.frame.GetPositionTuple()
1202	p.frame.SetPosition((x_pos, 112))
1203	p.frame.Show(True)
1204
1205	# Register for showing/hiding the panel
1206	wx.EVT_MENU(self, ID, self.on_view)
1207	if p not in self.plot_panels.values() and p.group_id != None:
1208	self.plot_panels[ID] = p
1209	if len(self.plot_panels) == 1:
1210	self.panel_on_focus = p
1211	self.set_panel_on_focus(None)
1212	if self._data_panel is not None and \
1213	self._plotting_plugin is not None:
1214	ind = self._data_panel.cb_plotpanel.FindString('None')
1215	if ind != wx.NOT_FOUND:
1216	self._data_panel.cb_plotpanel.Delete(ind)
1217	if caption not in self._data_panel.cb_plotpanel.GetItems():
1218	self._data_panel.cb_plotpanel.Append(str(caption), p)
1219	return ID
1220
1221	def _get_plotpanel_captions(self):
1222	"""
1223	Get all the plotpanel cations
1224
1225	: return: list of captions
1226	"""
1227	captions = []
1228	for Id in self.plot_panels.keys():
1229	captions.append(self.plot_panels[Id].window_caption)
1230
1231	return captions
1232
1233	def _setup_tool_bar(self):
1234	"""
1235	add toolbar to the frame
1236	"""
1237	self._toolbar = GUIToolBar(self)
1238	# The legacy code doesn't work well for wx 3.0
1239	# but the old code produces better results with wx 2.8
1240	if not IS_WIN and wx.VERSION_STRING >= '3.0.0.0':
1241	sizer = wx.BoxSizer(wx.VERTICAL)
1242	sizer.Add(self._toolbar, 0, wx.EXPAND)
1243	self.SetSizer(sizer)
1244	else:
1245	self.SetToolBar(self._toolbar)
1246	self._update_toolbar_helper()
1247	self._on_toggle_toolbar(event=None)
1248
1249	def _update_toolbar_helper(self):
1250	"""
1251	Helping to update the toolbar
1252	"""
1253	application_name = 'No Selected Analysis'
1254	panel_name = 'No Panel on Focus'
1255	c_panel = self.cpanel_on_focus
1256	if self._toolbar is None:
1257	return
1258	if c_panel is not None:
1259	self.reset_bookmark_menu(self.cpanel_on_focus)
1260	if self._current_perspective is not None:
1261	application_name = self._current_perspective.sub_menu
1262	c_panel_state = c_panel
1263	if c_panel is not None:
1264	panel_name = c_panel.window_caption
1265	if not c_panel.IsShownOnScreen():
1266	c_panel_state = None
1267	self._toolbar.update_toolbar(c_panel_state)
1268	self._toolbar.update_button(application_name=application_name,
1269	panel_name=panel_name)
1270	self._toolbar.Realize()
1271
1272	def _add_menu_tool(self):
1273	"""
1274	Tools menu
1275	Go through plug-ins and find tools to populate the tools menu
1276	"""
1277	style = self.__gui_style & GUIFRAME.CALCULATOR_ON
1278	if style == GUIFRAME.CALCULATOR_ON:
1279	self._tool_menu = None
1280	for item in self.plugins:
1281	if hasattr(item, "get_tools"):
1282	for tool in item.get_tools():
1283	# Only create a menu if we have at least one tool
1284	if self._tool_menu is None:
1285	self._tool_menu = wx.Menu()
1286	if tool[0].lower().count('python') > 0:
1287	self._tool_menu.AppendSeparator()
1288	id = wx.NewId()
1289	self._tool_menu.Append(id, tool[0], tool[1])
1290	wx.EVT_MENU(self, id, tool[2])
1291	if self._tool_menu is not None:
1292	self._menubar.Append(self._tool_menu, '&Tools')
1293
1294	def _add_current_plugin_menu(self):
1295	"""
1296	add current plugin menu
1297	Look for plug-in menus
1298	Add available plug-in sub-menus.
1299	"""
1300	if self._menubar is None or self._current_perspective is None \
1301	or self._menubar.GetMenuCount() == 0:
1302	return
1303	#replace or add a new menu for the current plugin
1304	pos = self._menubar.FindMenu(str(self._applications_menu_name))
1305	if pos == -1 and self._applications_menu_pos > 0:
1306	pos = self._applications_menu_pos
1307	if pos != -1:
1308	menu_list = self._current_perspective.populate_menu(self)
1309	if menu_list:
1310	for (menu, name) in menu_list:
1311	self._menubar.Replace(pos, menu, name)
1312	self._applications_menu_name = name
1313	self._applications_menu_pos = pos
1314	else:
1315	self._menubar.Remove(pos)
1316	self._applications_menu_name = None
1317	self._applications_menu_pos = -1
1318	else:
1319	menu_list = self._current_perspective.populate_menu(self)
1320	if menu_list:
1321	for (menu, name) in menu_list:
1322	if self._applications_menu_pos == -1:
1323	# Find the Analysis position and insert just after it if possible
1324	analysis_pos = self._menubar.FindMenu("Analysis")
1325	if analysis_pos == -1:
1326	self._menubar.Append(menu, name)
1327	self._applications_menu_pos = -1
1328	else:
1329	self._menubar.Insert(analysis_pos+1, menu, name)
1330	self._applications_menu_pos = analysis_pos + 1
1331	else:
1332	self._menubar.Insert(self._applications_menu_pos, menu, name)
1333	self._applications_menu_name = name
1334
1335	def _add_help_menu(self):
1336	"""
1337	add help menu to menu bar. Includes welcome page, about page,
1338	tutorial PDF and documentation pages.
1339	"""
1340	# Help menu
1341	self._help_menu = wx.Menu()
1342	style = self.__gui_style & GUIFRAME.WELCOME_PANEL_ON
1343
1344	wx_id = wx.NewId()
1345	self._help_menu.Append(wx_id, '&Documentation', '')
1346	wx.EVT_MENU(self, wx_id, self._onSphinxDocs)
1347	self._help_menu.AppendSeparator()
1348
1349	if config._do_tutorial and (IS_WIN or sys.platform == 'darwin'):
1350	wx_id = wx.NewId()
1351	self._help_menu.Append(wx_id, '&Tutorial', 'Software tutorial')
1352	wx.EVT_MENU(self, wx_id, self._onTutorial)
1353	self._help_menu.AppendSeparator()
1354
1355
1356	if config._do_acknowledge:
1357	wx_id = wx.NewId()
1358	self._help_menu.Append(wx_id, '&Acknowledge', 'Acknowledging SasView')
1359	wx.EVT_MENU(self, wx_id, self._onAcknowledge)
1360	self._help_menu.AppendSeparator()
1361
1362
1363	if config._do_aboutbox:
1364	logging.info("Doing help menu")
1365	wx_id = wx.NewId()
1366	self._help_menu.Append(wx_id, '&About', 'Software information')
1367	wx.EVT_MENU(self, wx_id, self._onAbout)
1368	self._help_menu.AppendSeparator()
1369
1370
1371	# Checking for updates
1372	wx_id = wx.NewId()
1373	self._help_menu.Append(wx_id, '&Check for update',
1374	'Check for the latest version of %s' % config.__appname__)
1375	wx.EVT_MENU(self, wx_id, self._check_update)
1376	self._menubar.Append(self._help_menu, '&Help')
1377
1378	def _add_menu_view(self):
1379	"""
1380	add menu items under view menu
1381	"""
1382	if not VIEW_MENU:
1383	return
1384	self._view_menu = wx.Menu()
1385
1386	wx_id = wx.NewId()
1387	hint = "Display the Grid Window for batch results etc."
1388	self._view_menu.Append(wx_id, '&Show Grid Window', hint)
1389	wx.EVT_MENU(self, wx_id, self.show_batch_frame)
1390
1391	self._view_menu.AppendSeparator()
1392	style = self.__gui_style & GUIFRAME.MANAGER_ON
1393	wx_id = wx.NewId()
1394	self._data_panel_menu = self._view_menu.Append(wx_id,
1395	'&Show Data Explorer', '')
1396	wx.EVT_MENU(self, wx_id, self.show_data_panel)
1397	if style == GUIFRAME.MANAGER_ON:
1398	self._data_panel_menu.SetText('Hide Data Explorer')
1399	else:
1400	self._data_panel_menu.SetText('Show Data Explorer')
1401
1402	self._view_menu.AppendSeparator()
1403	wx_id = wx.NewId()
1404	style1 = self.__gui_style & GUIFRAME.TOOLBAR_ON
1405	if style1 == GUIFRAME.TOOLBAR_ON:
1406	self._toolbar_menu = self._view_menu.Append(wx_id, '&Hide Toolbar', '')
1407	else:
1408	self._toolbar_menu = self._view_menu.Append(wx_id, '&Show Toolbar', '')
1409	wx.EVT_MENU(self, wx_id, self._on_toggle_toolbar)
1410
1411	if custom_config != None:
1412	self._view_menu.AppendSeparator()
1413	wx_id = wx.NewId()
1414	hint_ss = "Select the current/default configuration "
1415	hint_ss += "as a startup setting"
1416	preference_menu = self._view_menu.Append(wx_id, 'Startup Setting',
1417	hint_ss)
1418	wx.EVT_MENU(self, wx_id, self._on_preference_menu)
1419
1420	wx_id = wx.NewId()
1421	self._view_menu.AppendSeparator()
1422	self._view_menu.Append(wx_id, 'Category Manager', 'Edit model categories')
1423	wx.EVT_MENU(self, wx_id, self._on_category_manager)
1424
1425	self._menubar.Append(self._view_menu, '&View')
1426
1427	def show_batch_frame(self, event=None):
1428	"""
1429	show the grid of result
1430	"""
1431	# Show(False) before Show(True) in order to bring it to the front
1432	self.batch_frame.Show(False)
1433	self.batch_frame.Show(True)
1434
1435	def on_category_panel(self, event):
1436	"""
1437	On cat panel
1438	"""
1439	self._on_category_manager(event)
1440
1441	def _on_category_manager(self, event):
1442	"""
1443	Category manager frame
1444	"""
1445	frame = CategoryManager(self, -1, 'Model Category Manager')
1446	icon = self.GetIcon()
1447	frame.SetIcon(icon)
1448
1449	def _on_preference_menu(self, event):
1450	"""
1451	Build a panel to allow to edit Mask
1452	"""
1453	from sas.sasgui.guiframe.startup_configuration \
1454	import StartupConfiguration as ConfDialog
1455
1456	dialog = ConfDialog(parent=self, gui=self.__gui_style)
1457	result = dialog.ShowModal()
1458	if result == wx.ID_OK:
1459	dialog.write_custom_config()
1460	# post event for info
1461	wx.PostEvent(self, StatusEvent(status="Wrote custom configuration", info='info'))
1462	dialog.Destroy()
1463
1464	def _add_menu_application(self):
1465	"""
1466	# Attach a menu item for each defined perspective or application.
1467	# Only add the perspective menu if there are more than one perspectives
1468	add menu application
1469	"""
1470	if self._num_perspectives > 1:
1471	plug_data_count = False
1472	plug_no_data_count = False
1473	self._applications_menu = wx.Menu()
1474	pos = 0
1475	separator = self._applications_menu.AppendSeparator()
1476	for plug in self.plugins:
1477	if len(plug.get_perspective()) > 0:
1478	id = wx.NewId()
1479	if plug.use_data():
1480	self._applications_menu.InsertCheckItem(pos, id, plug.sub_menu, \
1481	"Switch to analysis: %s" % plug.sub_menu)
1482	plug_data_count = True
1483	pos += 1
1484	else:
1485	plug_no_data_count = True
1486	self._applications_menu.AppendCheckItem(id, plug.sub_menu, \
1487	"Switch to analysis: %s" % plug.sub_menu)
1488	wx.EVT_MENU(self, id, plug.on_perspective)
1489
1490	if not plug_data_count or not plug_no_data_count:
1491	self._applications_menu.RemoveItem(separator)
1492	#Windows introduces a "Window" menu item during the layout process
1493	#somehow. We want it to be next to the last item with Help as
1494	#last. However Analysis gets stuck after Window in normal ordering
1495	#so force it to be next after the Tools menu item. Should we add
1496	#another menu item will need to check if this is still where we
1497	#want Analysis. This is NOT an issue on the Mac which does not
1498	#have the extra Window menu item.
1499	# March 2016 Code Camp -- PDB
1500	Tools_pos = self._menubar.FindMenu("Tools")
1501	self._menubar.Insert(Tools_pos+1,self._applications_menu,
1502	'&Analysis')
1503	self._check_applications_menu()
1504
1505	def _populate_file_menu(self):
1506	"""
1507	Insert menu item under file menu
1508	"""
1509	for plugin in self.plugins:
1510	if len(plugin.populate_file_menu()) > 0:
1511	for item in plugin.populate_file_menu():
1512	m_name, m_hint, m_handler = item
1513	wx_id = wx.NewId()
1514	self._file_menu.Append(wx_id, m_name, m_hint)
1515	wx.EVT_MENU(self, wx_id, m_handler)
1516	self._file_menu.AppendSeparator()
1517
1518	style1 = self.__gui_style & GUIFRAME.MULTIPLE_APPLICATIONS
1519	if OPEN_SAVE_MENU:
1520	wx_id = wx.NewId()
1521	hint_load_file = "read all analysis states saved previously"
1522	self._save_appl_menu = self._file_menu.Append(wx_id, '&Open Project', hint_load_file)
1523	wx.EVT_MENU(self, wx_id, self._on_open_state_project)
1524
1525	if style1 == GUIFRAME.MULTIPLE_APPLICATIONS:
1526	# some menu of plugin to be seen under file menu
1527	hint_load_file = "Read a status files and load"
1528	hint_load_file += " them into the analysis"
1529	wx_id = wx.NewId()
1530	self._save_appl_menu = self._file_menu.Append(wx_id,
1531	'&Open Analysis', hint_load_file)
1532	wx.EVT_MENU(self, wx_id, self._on_open_state_application)
1533	if OPEN_SAVE_MENU:
1534	self._file_menu.AppendSeparator()
1535	wx_id = wx.NewId()
1536	self._file_menu.Append(wx_id, '&Save Project',
1537	'Save the state of the whole analysis')
1538	wx.EVT_MENU(self, wx_id, self._on_save_project)
1539	if style1 == GUIFRAME.MULTIPLE_APPLICATIONS:
1540	wx_id = wx.NewId()
1541	self._save_appl_menu = self._file_menu.Append(wx_id, \
1542	'&Save Analysis', 'Save state of the current active analysis panel')
1543	wx.EVT_MENU(self, wx_id, self._on_save_application)
1544	if not sys.platform == 'darwin':
1545	self._file_menu.AppendSeparator()
1546	wx_id = wx.NewId()
1547	self._file_menu.Append(wx_id, '&Quit', 'Exit')
1548	wx.EVT_MENU(self, wx_id, self.Close)
1549
1550	def _add_menu_file(self):
1551	"""
1552	add menu file
1553	"""
1554	# File menu
1555	self._file_menu = wx.Menu()
1556	# Add sub menus
1557	self._menubar.Append(self._file_menu, '&File')
1558
1559	def _add_menu_edit(self):
1560	"""
1561	add menu edit
1562	"""
1563	if not EDIT_MENU:
1564	return
1565	# Edit Menu
1566	self._edit_menu = wx.Menu()
1567	self._edit_menu.Append(GUIFRAME_ID.UNDO_ID, '&Undo',
1568	'Undo the previous action')
1569	wx.EVT_MENU(self, GUIFRAME_ID.UNDO_ID, self.on_undo_panel)
1570	self._edit_menu.Append(GUIFRAME_ID.REDO_ID, '&Redo',
1571	'Redo the previous action')
1572	wx.EVT_MENU(self, GUIFRAME_ID.REDO_ID, self.on_redo_panel)
1573	self._edit_menu.AppendSeparator()
1574	self._edit_menu.Append(GUIFRAME_ID.COPY_ID, '&Copy Params',
1575	'Copy parameter values')
1576	wx.EVT_MENU(self, GUIFRAME_ID.COPY_ID, self.on_copy_panel)
1577	self._edit_menu.Append(GUIFRAME_ID.PASTE_ID, '&Paste Params',
1578	'Paste parameter values')
1579	wx.EVT_MENU(self, GUIFRAME_ID.PASTE_ID, self.on_paste_panel)
1580
1581	self._edit_menu.AppendSeparator()
1582
1583	self._edit_menu_copyas = wx.Menu()
1584	#Sub menu for Copy As...
1585	self._edit_menu_copyas.Append(GUIFRAME_ID.COPYEX_ID, 'Copy current tab to Excel',
1586	'Copy parameter values in tabular format')
1587	wx.EVT_MENU(self, GUIFRAME_ID.COPYEX_ID, self.on_copy_panel)
1588
1589	self._edit_menu_copyas.Append(GUIFRAME_ID.COPYLAT_ID, 'Copy current tab to LaTeX',
1590	'Copy parameter values in tabular format')
1591	wx.EVT_MENU(self, GUIFRAME_ID.COPYLAT_ID, self.on_copy_panel)
1592
1593
1594	self._edit_menu.AppendMenu(GUIFRAME_ID.COPYAS_ID, 'Copy Params as...',
1595	self._edit_menu_copyas,
1596	'Copy parameter values in various formats')
1597
1598	self._edit_menu.AppendSeparator()
1599
1600	self._edit_menu.Append(GUIFRAME_ID.PREVIEW_ID, '&Report Results',
1601	'Preview current panel')
1602	wx.EVT_MENU(self, GUIFRAME_ID.PREVIEW_ID, self.on_preview_panel)
1603
1604	self._edit_menu.Append(GUIFRAME_ID.RESET_ID, '&Reset Page',
1605	'Reset current panel')
1606	wx.EVT_MENU(self, GUIFRAME_ID.RESET_ID, self.on_reset_panel)
1607
1608	self._menubar.Append(self._edit_menu, '&Edit')
1609	self.enable_edit_menu()
1610
1611	def get_style(self):
1612	"""
1613	Return the gui style
1614	"""
1615	return self.__gui_style
1616
1617	def _add_menu_data(self):
1618	"""
1619	Add menu item item data to menu bar
1620	"""
1621	if self._data_plugin is not None:
1622	menu_list = self._data_plugin.populate_menu(self)
1623	if menu_list:
1624	for (menu, name) in menu_list:
1625	self._menubar.Append(menu, name)
1626
1627	def _on_toggle_toolbar(self, event=None):
1628	"""
1629	hide or show toolbar
1630	"""
1631	if self._toolbar is None:
1632	return
1633	if self._toolbar.IsShown():
1634	if self._toolbar_menu is not None:
1635	self._toolbar_menu.SetItemLabel('Show Toolbar')
1636	self._toolbar.Hide()
1637	else:
1638	if self._toolbar_menu is not None:
1639	self._toolbar_menu.SetItemLabel('Hide Toolbar')
1640	self._toolbar.Show()
1641	self._toolbar.Realize()
1642
1643	def _on_status_event(self, evt):
1644	"""
1645	Display status message
1646	"""
1647	# This CallAfter fixes many crashes on MAC.
1648	wx.CallAfter(self.sb.set_status, evt)
1649
1650	def on_view(self, evt):
1651	"""
1652	A panel was selected to be shown. If it's not already
1653	shown, display it.
1654
1655	:param evt: menu event
1656
1657	"""
1658	panel_id = str(evt.GetId())
1659	self.on_set_plot_focus(self.panels[panel_id])
1660	wx.CallLater(5 * TIME_FACTOR, self.set_schedule(True))
1661	self.set_plot_unfocus()
1662
1663	def show_welcome_panel(self, event):
1664	"""
1665	Display the welcome panel
1666	"""
1667	if self.defaultPanel is None:
1668	return
1669	frame = self.panels['default'].get_frame()
1670	if frame == None:
1671	return
1672	# Show default panel
1673	if not frame.IsShown():
1674	frame.Show(True)
1675
1676	def on_close_welcome_panel(self):
1677	"""
1678	Close the welcome panel
1679	"""
1680	if self.defaultPanel is None:
1681	return
1682	default_panel = self.panels["default"].frame
1683	if default_panel.IsShown():
1684	default_panel.Show(False)
1685
1686	def delete_panel(self, uid):
1687	"""
1688	delete panel given uid
1689	"""
1690	ID = str(uid)
1691	config.printEVT("delete_panel: %s" % ID)
1692	if ID in self.panels.keys():
1693	self.panel_on_focus = None
1694	panel = self.panels[ID]
1695
1696	if hasattr(panel, "connect"):
1697	panel.connect.disconnect()
1698	self._plotting_plugin.delete_panel(panel.group_id)
1699
1700	if panel in self.schedule_full_draw_list:
1701	self.schedule_full_draw_list.remove(panel)
1702
1703	#delete uid number not str(uid)
1704	if ID in self.plot_panels.keys():
1705	del self.plot_panels[ID]
1706	if ID in self.panels.keys():
1707	del self.panels[ID]
1708	else:
1709	logging.error("delete_panel: No such plot id as %s" % ID)
1710
1711	def create_gui_data(self, data, path=None):
1712	"""
1713	"""
1714	return self._data_manager.create_gui_data(data, path)
1715
1716	def get_data(self, path):
1717	"""
1718	"""
1719	log_msg = ''
1720	basename = os.path.basename(path)
1721	_, extension = os.path.splitext(basename)
1722	if extension.lower() not in EXTENSIONS:
1723	log_msg = "File Loader cannot "
1724	log_msg += "load: %s\n" % str(basename)
1725	log_msg += "Try Data opening...."
1726	logging.error(log_msg)
1727	return
1728
1729	#reading a state file
1730	for plug in self.plugins:
1731	reader, ext = plug.get_extensions()
1732	if reader is not None:
1733	#read the state of the single plugin
1734	if extension == ext:
1735	reader.read(path)
1736	return
1737	elif extension == APPLICATION_STATE_EXTENSION:
1738	try:
1739	reader.read(path)
1740	except:
1741	msg = "DataLoader Error: Encounted Non-ASCII character"
1742	msg += "\n(%s)" % sys.exc_value
1743	wx.PostEvent(self, StatusEvent(status=msg,
1744	info="error", type="stop"))
1745	return
1746
1747	style = self.__gui_style & GUIFRAME.MANAGER_ON
1748	if style == GUIFRAME.MANAGER_ON:
1749	if self._data_panel is not None:
1750	self._data_panel.frame.Show(True)
1751
1752	def load_from_cmd(self, path):
1753	"""
1754	load data from cmd or application
1755	"""
1756	if path is None:
1757	return
1758	else:
1759	path = os.path.abspath(path)
1760	if not os.path.isfile(path) and not os.path.isdir(path):
1761	return
1762
1763	if os.path.isdir(path):
1764	self.load_folder(path)
1765	return
1766
1767	basename = os.path.basename(path)
1768	_, extension = os.path.splitext(basename)
1769	if extension.lower() not in EXTENSIONS:
1770	self.load_data(path)
1771	else:
1772	self.load_state(path)
1773
1774	self._default_save_location = os.path.dirname(path)
1775
1776	def load_state(self, path, is_project=False):
1777	"""
1778	load data from command line or application
1779	"""
1780	if path and (path is not None) and os.path.isfile(path):
1781	basename = os.path.basename(path)
1782	if APPLICATION_STATE_EXTENSION is not None \
1783	and basename.endswith(APPLICATION_STATE_EXTENSION):
1784	if is_project:
1785	for ID in self.plot_panels.keys():
1786	panel = self.plot_panels[ID]
1787	panel.on_close(None)
1788	self.get_data(path)
1789	wx.PostEvent(self, StatusEvent(status="Completed loading."))
1790	else:
1791	wx.PostEvent(self, StatusEvent(status=" "))
1792
1793	def load_data(self, path):
1794	"""
1795	load data from command line
1796	"""
1797	if not os.path.isfile(path):
1798	return
1799	basename = os.path.basename(path)
1800	_, extension = os.path.splitext(basename)
1801	if extension.lower() in EXTENSIONS:
1802	log_msg = "Data Loader cannot "
1803	log_msg += "load: %s\n" % str(path)
1804	log_msg += "Try File opening ...."
1805	logging.error(log_msg)
1806	return
1807	log_msg = ''
1808	output = {}
1809	error_message = ""
1810	try:
1811	logging.info("Loading Data...:\n" + str(path) + "\n")
1812	temp = self.loader.load(path)
1813	if temp.__class__.__name__ == "list":
1814	for item in temp:
1815	data = self.create_gui_data(item, path)
1816	output[data.id] = data
1817	else:
1818	data = self.create_gui_data(temp, path)
1819	output[data.id] = data
1820
1821	self.add_data(data_list=output)
1822	except:
1823	error_message = "Error while loading"
1824	error_message += " Data from cmd:\n %s\n" % str(path)
1825	error_message += str(sys.exc_value) + "\n"
1826	logging.error(error_message)
1827
1828	def load_folder(self, path):
1829	"""
1830	Load entire folder
1831	"""
1832	if not os.path.isdir(path):
1833	return
1834	if self._data_plugin is None:
1835	return
1836	try:
1837	if path is not None:
1838	self._default_save_location = os.path.dirname(path)
1839	file_list = self._data_plugin.get_file_path(path)
1840	self._data_plugin.get_data(file_list)
1841	else:
1842	return
1843	except:
1844	error_message = "Error while loading"
1845	error_message += " Data folder from cmd:\n %s\n" % str(path)
1846	error_message += str(sys.exc_value) + "\n"
1847	logging.error(error_message)
1848
1849	def _on_open_state_application(self, event):
1850	"""
1851	"""
1852	path = None
1853	if self._default_save_location == None:
1854	self._default_save_location = os.getcwd()
1855	wx.PostEvent(self, StatusEvent(status="Loading Analysis file..."))
1856	plug_wlist = self._on_open_state_app_helper()
1857	dlg = wx.FileDialog(self,
1858	"Choose a file",
1859	self._default_save_location, "",
1860	plug_wlist)
1861	if dlg.ShowModal() == wx.ID_OK:
1862	path = dlg.GetPath()
1863	if path is not None:
1864	self._default_save_location = os.path.dirname(path)
1865	dlg.Destroy()
1866	self.load_state(path=path)
1867
1868	def _on_open_state_app_helper(self):
1869	"""
1870	Helps '_on_open_state_application()' to find the extension of
1871	the current perspective/application
1872	"""
1873	# No current perspective or no extension attr
1874	if self._current_perspective is None:
1875	return PLUGINS_WLIST
1876	try:
1877	# Find the extension of the perspective
1878	# and get that as 1st item in list
1879	ind = None
1880	app_ext = self._current_perspective._extensions
1881	plug_wlist = config.PLUGINS_WLIST
1882	for ext in set(plug_wlist):
1883	if ext.count(app_ext) > 0:
1884	ind = ext
1885	break
1886	# Found the extension
1887	if ind != None:
1888	plug_wlist.remove(ind)
1889	plug_wlist.insert(0, ind)
1890	try:
1891	plug_wlist = '\|'.join(plug_wlist)
1892	except:
1893	plug_wlist = ''
1894
1895	except:
1896	plug_wlist = PLUGINS_WLIST
1897
1898	return plug_wlist
1899
1900	def _on_open_state_project(self, event):
1901	"""
1902	"""
1903	path = None
1904	if self._default_save_location == None:
1905	self._default_save_location = os.getcwd()
1906	msg = "This operation will set SasView to its freshly opened state "
1907	msg += "before loading the project. Do you wish to continue?"
1908	if not self._data_panel.on_remove(None, msg):
1909	wx.PostEvent(self, StatusEvent(status="Loading Project file..."))
1910	dlg = wx.FileDialog(self,
1911	"Choose a file",
1912	self._default_save_location, "",
1913	APPLICATION_WLIST)
1914	if dlg.ShowModal() == wx.ID_OK:
1915	path = dlg.GetPath()
1916	if path is not None:
1917	self._default_save_location = os.path.dirname(path)
1918	dlg.Destroy()
1919
1920	# Reset to a base state
1921	self._on_reset_state()
1922
1923	# Load the project file
1924	self.load_state(path=path, is_project=True)
1925
1926	def _on_reset_state(self):
1927	"""
1928	Resets SasView to its freshly opened state.
1929	:return: None
1930	"""
1931	# Reset all plugins to their base state
1932	for plugin in self.plugins:
1933	plugin.clear_panel()
1934	# Reset plot number to 0
1935	self.graph_num = 0
1936	# Remove all loaded data
1937	self._data_panel.selection_cbox.SetValue('Select all Data')
1938	self._data_panel._on_selection_type(None)
1939
1940	def _on_save_application(self, event):
1941	"""
1942	save the state of the current active application
1943	"""
1944	if self.cpanel_on_focus is not None:
1945	try:
1946	wx.PostEvent(self,
1947	StatusEvent(status="Saving Analysis file..."))
1948	self.cpanel_on_focus.on_save(event)
1949	wx.PostEvent(self,
1950	StatusEvent(status="Completed saving."))
1951	except:
1952	msg = "Error occurred while saving: "
1953	msg += "To save, the application panel should have a data set.."
1954	wx.PostEvent(self, StatusEvent(status=msg))
1955
1956	def _on_save_project(self, event):
1957	"""
1958	save the state of the SasView as *.svs
1959	"""
1960	if self._current_perspective is None:
1961	return
1962	wx.PostEvent(self, StatusEvent(status="Saving Project file..."))
1963	path = None
1964	extension = '*' + APPLICATION_STATE_EXTENSION
1965	dlg = wx.FileDialog(self, "Save Project file",
1966	self._default_save_location, "sasview_proj",
1967	extension,
1968	wx.SAVE)
1969	if dlg.ShowModal() == wx.ID_OK:
1970	path = dlg.GetPath()
1971	self._default_save_location = os.path.dirname(path)
1972	else:
1973	return None
1974	dlg.Destroy()
1975	try:
1976	if path is None:
1977	return
1978	# default cansas xml doc
1979	doc = None
1980	for panel in self.panels.values():
1981	temp = panel.save_project(doc)
1982	if temp is not None:
1983	doc = temp
1984
1985	# Write the XML document
1986	extens = APPLICATION_STATE_EXTENSION
1987	fName = os.path.splitext(path)[0] + extens
1988	if doc != None:
1989	fd = open(fName, 'w')
1990	fd.write(doc.toprettyxml())
1991	fd.close()
1992	wx.PostEvent(self, StatusEvent(status="Completed Saving."))
1993	else:
1994	msg = "Error occurred while saving the project: "
1995	msg += "To save, at least one application panel "
1996	msg += "should have a data set "
1997	msg += "and model selected. "
1998	msg += "No project was saved to %s" % (str(path))
1999	logging.warning(msg)
2000	wx.PostEvent(self, StatusEvent(status=msg, info="error"))
2001	except:
2002	msg = "Error occurred while saving: "
2003	msg += "To save, at least one application panel "
2004	msg += "should have a data set.."
2005	wx.PostEvent(self, StatusEvent(status=msg, info="error"))
2006
2007	def on_save_helper(self, doc, reader, panel, path):
2008	"""
2009	Save state into a file
2010	"""
2011	if reader is not None:
2012	# case of a panel with multi-pages
2013	if hasattr(panel, "opened_pages"):
2014	for _, page in panel.opened_pages.iteritems():
2015	data = page.get_data()
2016	# state must be cloned
2017	state = page.get_state().clone()
2018	if data is not None:
2019	new_doc = reader.write_toXML(data, state)
2020	if doc != None and hasattr(doc, "firstChild"):
2021	child = new_doc.firstChild.firstChild
2022	doc.firstChild.appendChild(child)
2023	else:
2024	doc = new_doc
2025	# case of only a panel
2026	else:
2027	data = panel.get_data()
2028	state = panel.get_state()
2029	if data is not None:
2030	new_doc = reader.write_toXML(data, state)
2031	if doc != None and hasattr(doc, "firstChild"):
2032	child = new_doc.firstChild.firstChild
2033	doc.firstChild.appendChild(child)
2034	else:
2035	doc = new_doc
2036	return doc
2037
2038	def quit_guiframe(self):
2039	"""
2040	Pop up message to make sure the user wants to quit the application
2041	"""
2042	message = "\nDo you really want to exit this application? \n\n"
2043	dial = wx.MessageDialog(self, message, 'Confirm Exit',
2044	wx.YES_NO \| wx.YES_DEFAULT \| wx.ICON_QUESTION)
2045	if dial.ShowModal() == wx.ID_YES:
2046	return True
2047	else:
2048	return False
2049
2050	def WindowClose(self, event=None):
2051	"""
2052	Quit the application from x icon
2053	"""
2054	flag = self.quit_guiframe()
2055	if flag:
2056	_pylab_helpers.Gcf.figs = {}
2057	self.Close()
2058
2059	def Close(self, event=None):
2060	"""
2061	Quit the application
2062	"""
2063	logging.info(" --- SasView session was closed --- \n")
2064	wx.Exit()
2065	sys.exit()
2066
2067	def _check_update(self, event=None):
2068	"""
2069	Check with the deployment server whether a new version
2070	of the application is available.
2071	A thread is started for the connecting with the server. The thread calls
2072	a call-back method when the current version number has been obtained.
2073	"""
2074	version_info = {"version": "0.0.0"}
2075	c = Connection(config.__update_URL__, config.UPDATE_TIMEOUT)
2076	response = c.connect()
2077	if response is not None:
2078	try:
2079	#
2080	content = response.read().strip()
2081	logging.info("Connected to www.sasview.org. Latest version: %s"
2082	% (content))
2083	version_info = json.loads(content)
2084	except:
2085	logging.info("Failed to connect to www.sasview.org")
2086	self._process_version(version_info, standalone=event == None)
2087
2088	def _process_version(self, version_info, standalone=True):
2089	"""
2090	Call-back method for the process of checking for updates.
2091	This methods is called by a VersionThread object once the current
2092	version number has been obtained. If the check is being done in the
2093	background, the user will not be notified unless there's an update.
2094
2095	:param version: version string
2096	:param standalone: True of the update is being checked in
2097	the background, False otherwise.
2098
2099	"""
2100	try:
2101	version = version_info["version"]
2102	if version == "0.0.0":
2103	msg = "Could not connect to the application server."
2104	msg += " Please try again later."
2105	self.SetStatusText(msg)
2106	elif cmp(version, config.__version__) > 0:
2107	msg = "Version %s is available! " % str(version)
2108	if not standalone:
2109	import webbrowser
2110	if "download_url" in version_info:
2111	webbrowser.open(version_info["download_url"])
2112	else:
2113	webbrowser.open(config.__download_page__)
2114	else:
2115	msg += "See the help menu to download it."
2116	self.SetStatusText(msg)
2117	else:
2118	if not standalone:
2119	msg = "You have the latest version"
2120	msg += " of %s" % str(config.__appname__)
2121	self.SetStatusText(msg)
2122	except:
2123	msg = "guiframe: could not get latest application"
2124	msg += " version number\n %s" % sys.exc_value
2125	logging.error(msg)
2126	if not standalone:
2127	msg = "Could not connect to the application server."
2128	msg += " Please try again later."
2129	self.SetStatusText(msg)
2130
2131	def _onAcknowledge(self, evt):
2132	"""
2133	Pop up the acknowledge dialog
2134
2135	:param evt: menu event
2136
2137	"""
2138	if config._do_acknowledge:
2139	import sas.sasgui.guiframe.acknowledgebox as AcknowledgeBox
2140	dialog = AcknowledgeBox.DialogAcknowledge(None, -1, "")
2141	dialog.ShowModal()
2142
2143	def _onAbout(self, evt):
2144	"""
2145	Pop up the about dialog
2146
2147	:param evt: menu event
2148
2149	"""
2150	if config._do_aboutbox:
2151	import sas.sasgui.guiframe.aboutbox as AboutBox
2152	dialog = AboutBox.DialogAbout(None, -1, "")
2153	dialog.ShowModal()
2154
2155	def _onTutorial(self, evt):
2156	"""
2157	Pop up the tutorial dialog
2158
2159	:param evt: menu event
2160
2161	"""
2162	if config._do_tutorial:
2163	path = config.TUTORIAL_PATH
2164	if IS_WIN:
2165	try:
2166	from sas.sasgui.guiframe.pdfview import PDFFrame
2167	dialog = PDFFrame(None, -1, "Tutorial", path)
2168	# put icon
2169	self.put_icon(dialog)
2170	dialog.Show(True)
2171	except:
2172	logging.error("Error in _onTutorial: %s" % sys.exc_value)
2173	try:
2174	# Try an alternate method
2175	logging.error("Could not open the tutorial pdf, trying xhtml2pdf")
2176	from xhtml2pdf import pisa
2177	pisa.startViewer(path)
2178	except:
2179	logging.error("Could not open the tutorial pdf with xhtml2pdf")
2180	msg = "This feature requires 'PDF Viewer'\n"
2181	wx.MessageBox(msg, 'Error')
2182	else:
2183	try:
2184	command = "open '%s'" % path
2185	os.system(command)
2186	except:
2187	try:
2188	# Try an alternate method
2189	logging.error("Could not open the tutorial pdf, trying xhtml2pdf")
2190	from xhtml2pdf import pisa
2191	pisa.startViewer(path)
2192	except:
2193	logging.error("Could not open the tutorial pdf with xhtml2pdf")
2194	msg = "This feature requires the 'Preview' application\n"
2195	wx.MessageBox(msg, 'Error')
2196
2197	def _onSphinxDocs(self, evt):
2198	"""
2199	Bring up Sphinx Documentation at top level whenever the menu item
2200	'documentation' is clicked. Calls DocumentationWindow with the top
2201	level path of "index.html"
2202
2203	:param evt: menu event
2204	"""
2205	# Running SasView "in-place" using run.py means the docs will be in a
2206	# different place than they would otherwise.
2207	from documentation_window import DocumentationWindow
2208	_TreeLocation = "user/user.html"
2209	DocumentationWindow(self, -1, _TreeLocation, "", "SasView Documentation")
2210
2211	def set_manager(self, manager):
2212	"""
2213	Sets the application manager for this frame
2214
2215	:param manager: frame manager
2216	"""
2217	self.app_manager = manager
2218
2219	def post_init(self):
2220	"""
2221	This initialization method is called after the GUI
2222	has been created and all plug-ins loaded. It calls
2223	the post_init() method of each plug-in (if it exists)
2224	so that final initialization can be done.
2225	"""
2226	for item in self.plugins:
2227	if hasattr(item, "post_init"):
2228	item.post_init()
2229
2230	def set_perspective(self, panels):
2231	"""
2232	Sets the perspective of the GUI.
2233	Opens all the panels in the list, and closes
2234	all the others.
2235
2236	:param panels: list of panels
2237	"""
2238	for item in self.panels.keys():
2239	# Check whether this is a sticky panel
2240	if hasattr(self.panels[item], "ALWAYS_ON"):
2241	if self.panels[item].ALWAYS_ON:
2242	continue
2243	if self.panels[item] == None:
2244	continue
2245	if self.panels[item].window_name in panels:
2246	frame = self.panels[item].get_frame()
2247	if not frame.IsShown():
2248	frame.Show(True)
2249	else:
2250	# always show the data panel if enable
2251	style = self.__gui_style & GUIFRAME.MANAGER_ON
2252	if (style == GUIFRAME.MANAGER_ON) and self.panels[item] == self._data_panel:
2253	if 'data_panel' in self.panels.keys():
2254	frame = self.panels['data_panel'].get_frame()
2255	if frame == None:
2256	continue
2257	flag = frame.IsShown()
2258	frame.Show(flag)
2259	else:
2260	frame = self.panels[item].get_frame()
2261	if frame == None:
2262	continue
2263
2264	if frame.IsShown():
2265	frame.Show(False)
2266
2267	def show_data_panel(self, event=None, action=True):
2268	"""
2269	show the data panel
2270	"""
2271	if self._data_panel_menu == None:
2272	return
2273	label = self._data_panel_menu.GetText()
2274	pane = self.panels["data_panel"]
2275	frame = pane.get_frame()
2276	if label == 'Show Data Explorer':
2277	if action:
2278	frame.Show(True)
2279	self.__gui_style = self.__gui_style \| GUIFRAME.MANAGER_ON
2280	self._data_panel_menu.SetText('Hide Data Explorer')
2281	else:
2282	if action:
2283	frame.Show(False)
2284	self.__gui_style = self.__gui_style & (~GUIFRAME.MANAGER_ON)
2285	self._data_panel_menu.SetText('Show Data Explorer')
2286
2287	def add_data_helper(self, data_list):
2288	"""
2289	"""
2290	if self._data_manager is not None:
2291	self._data_manager.add_data(data_list)
2292
2293	def add_data(self, data_list):
2294	"""
2295	receive a dictionary of data from loader
2296	store them its data manager if possible
2297	send to data the current active perspective if the data panel
2298	is not active.
2299	:param data_list: dictionary of data's ID and value Data
2300	"""
2301	#Store data into manager
2302	self.add_data_helper(data_list)
2303	# set data in the data panel
2304	if self._data_panel is not None:
2305	data_state = self._data_manager.get_data_state(data_list.keys())
2306	self._data_panel.load_data_list(data_state)
2307	#if the data panel is shown wait for the user to press a button
2308	#to send data to the current perspective. if the panel is not
2309	#show automatically send the data to the current perspective
2310	style = self.__gui_style & GUIFRAME.MANAGER_ON
2311	if style == GUIFRAME.MANAGER_ON:
2312	#wait for button press from the data panel to set_data
2313	if self._data_panel is not None:
2314	self._data_panel.frame.Show(True)
2315	else:
2316	#automatically send that to the current perspective
2317	self.set_data(data_id=data_list.keys())
2318
2319	def set_data(self, data_id, theory_id=None):
2320	"""
2321	set data to current perspective
2322	"""
2323	list_data, _ = self._data_manager.get_by_id(data_id)
2324	if self._current_perspective is not None:
2325	self._current_perspective.set_data(list_data.values())
2326
2327	else:
2328	msg = "Guiframe does not have a current perspective"
2329	logging.info(msg)
2330
2331	def set_theory(self, state_id, theory_id=None):
2332	"""
2333	"""
2334	_, list_theory = self._data_manager.get_by_id(theory_id)
2335	if self._current_perspective is not None:
2336	try:
2337	self._current_perspective.set_theory(list_theory.values())
2338	except:
2339	msg = "Guiframe set_theory: \n" + str(sys.exc_value)
2340	logging.info(msg)
2341	wx.PostEvent(self, StatusEvent(status=msg, info="error"))
2342	else:
2343	msg = "Guiframe does not have a current perspective"
2344	logging.info(msg)
2345
2346	def plot_data(self, state_id, data_id=None,
2347	theory_id=None, append=False):
2348	"""
2349	send a list of data to plot
2350	"""
2351	data_list, _ = self._data_manager.get_by_id(data_id)
2352	_, temp_list_theory = self._data_manager.get_by_id(theory_id)
2353	total_plot_list = data_list.values()
2354	for item in temp_list_theory.values():
2355	theory_data, theory_state = item
2356	total_plot_list.append(theory_data)
2357	GROUP_ID = wx.NewId()
2358	for new_plot in total_plot_list:
2359	if append:
2360	if self.panel_on_focus is None:
2361	message = "cannot append plot. No plot panel on focus!"
2362	message += "please click on any available plot to set focus"
2363	wx.PostEvent(self, StatusEvent(status=message,
2364	info='warning'))
2365	return
2366	else:
2367	if self.enable_add_data(new_plot):
2368	new_plot.group_id = self.panel_on_focus.group_id
2369	else:
2370	message = "Only 1D Data can be append to"
2371	message += " plot panel containing 1D data.\n"
2372	message += "%s not be appended.\n" % str(new_plot.name)
2373	message += "try new plot option.\n"
2374	wx.PostEvent(self, StatusEvent(status=message,
2375	info='warning'))
2376	else:
2377	#if not append then new plot
2378	from sas.sasgui.guiframe.dataFitting import Data2D
2379	if issubclass(Data2D, new_plot.__class__):
2380	#for 2 D always plot in a separated new plot
2381	new_plot.group_id = wx.NewId()
2382	else:
2383	# plot all 1D in a new plot
2384	new_plot.group_id = GROUP_ID
2385	title = "PLOT " + str(new_plot.title)
2386	wx.PostEvent(self, NewPlotEvent(plot=new_plot,
2387	title=title,
2388	group_id=new_plot.group_id))
2389
2390	def remove_data(self, data_id, theory_id=None):
2391	"""
2392	Delete data state if data_id is provide
2393	delete theory created with data of id data_id if theory_id is provide
2394	if delete all true: delete the all state
2395	else delete theory
2396	"""
2397	temp = data_id + theory_id
2398	for plug in self.plugins:
2399	plug.delete_data(temp)
2400	data_list, _ = self._data_manager.get_by_id(data_id)
2401	_, temp_list_theory = self._data_manager.get_by_id(theory_id)
2402	total_plot_list = data_list.values()
2403	for item in temp_list_theory.values():
2404	theory_data, theory_state = item
2405	total_plot_list.append(theory_data)
2406	for new_plot in total_plot_list:
2407	for group_id in new_plot.list_group_id:
2408	wx.PostEvent(self, NewPlotEvent(id=new_plot.id,
2409	group_id=group_id,
2410	action='remove'))
2411	#remove res plot: Todo: improve
2412	wx.CallAfter(self._remove_res_plot, new_plot.id)
2413	self._data_manager.delete_data(data_id=data_id,
2414	theory_id=theory_id)
2415
2416	def _remove_res_plot(self, id):
2417	"""
2418	Try to remove corresponding res plot
2419
2420	: param id: id of the data
2421	"""
2422	try:
2423	wx.PostEvent(self, NewPlotEvent(id=("res" + str(id)),
2424	group_id=("res" + str(id)),
2425	action='remove'))
2426	except:
2427	logging.error(sys.exc_value)
2428
2429	def save_data1d(self, data, fname):
2430	"""
2431	Save data dialog
2432	"""
2433	default_name = fname
2434	wildcard = "Text files (.txt)\|.txt\|"\
2435	"CanSAS 1D files(.xml)\|.xml"
2436	path = None
2437	dlg = wx.FileDialog(self, "Choose a file",
2438	self._default_save_location,
2439	default_name, wildcard, wx.SAVE)
2440
2441	if dlg.ShowModal() == wx.ID_OK:
2442	path = dlg.GetPath()
2443	# ext_num = 0 for .txt, ext_num = 1 for .xml
2444	# This is MAC Fix
2445	ext_num = dlg.GetFilterIndex()
2446	if ext_num == 0:
2447	ext_format = '.txt'
2448	else:
2449	ext_format = '.xml'
2450	path = os.path.splitext(path)[0] + ext_format
2451	mypath = os.path.basename(path)
2452
2453	#Instantiate a loader
2454	loader = Loader()
2455	ext_format = ".txt"
2456	if os.path.splitext(mypath)[1].lower() == ext_format:
2457	# Make sure the ext included in the file name
2458	# especially on MAC
2459	fName = os.path.splitext(path)[0] + ext_format
2460	self._onsaveTXT(data, fName)
2461	ext_format = ".xml"
2462	if os.path.splitext(mypath)[1].lower() == ext_format:
2463	# Make sure the ext included in the file name
2464	# especially on MAC
2465	fName = os.path.splitext(path)[0] + ext_format
2466	loader.save(fName, data, ext_format)
2467	try:
2468	self._default_save_location = os.path.dirname(path)
2469	except:
2470	pass
2471	dlg.Destroy()
2472
2473
2474	def _onsaveTXT(self, data, path):
2475	"""
2476	Save file as txt
2477
2478	.. todo:: Refactor and remove this method. See 'TODO' in _onSave.
2479	"""
2480	if not path == None:
2481	out = open(path, 'w')
2482	has_errors = True
2483	if data.dy == None or data.dy == []:
2484	has_errors = False
2485	# Sanity check
2486	if has_errors:
2487	try:
2488	if len(data.y) != len(data.dy):
2489	has_errors = False
2490	except:
2491	has_errors = False
2492	if has_errors:
2493	if data.dx != None and data.dx != []:
2494	out.write("<X> <Y> <dY> <dX>\n")
2495	else:
2496	out.write("<X> <Y> <dY>\n")
2497	else:
2498	out.write("<X> <Y>\n")
2499
2500	for i in range(len(data.x)):
2501	if has_errors:
2502	if data.dx != None and data.dx != []:
2503	if data.dx[i] != None:
2504	out.write("%g %g %g %g\n" % (data.x[i],
2505	data.y[i],
2506	data.dy[i],
2507	data.dx[i]))
2508	else:
2509	out.write("%g %g %g\n" % (data.x[i],
2510	data.y[i],
2511	data.dy[i]))
2512	else:
2513	out.write("%g %g %g\n" % (data.x[i],
2514	data.y[i],
2515	data.dy[i]))
2516	else:
2517	out.write("%g %g\n" % (data.x[i],
2518	data.y[i]))
2519	out.close()
2520
2521	def show_data1d(self, data, name):
2522	"""
2523	Show data dialog
2524	"""
2525	try:
2526	xmin = min(data.x)
2527	ymin = min(data.y)
2528	except:
2529	msg = "Unable to find min/max of \n data named %s" % \
2530	data.filename
2531	wx.PostEvent(self, StatusEvent(status=msg,
2532	info="error"))
2533	raise ValueError, msg
2534	## text = str(data)
2535	text = data.__str__()
2536	text += 'Data Min Max:\n'
2537	text += 'X_min = %s: X_max = %s\n' % (xmin, max(data.x))
2538	text += 'Y_min = %s: Y_max = %s\n' % (ymin, max(data.y))
2539	if data.dy != None:
2540	text += 'dY_min = %s: dY_max = %s\n' % (min(data.dy), max(data.dy))
2541	text += '\nData Points:\n'
2542	x_st = "X"
2543	for index in range(len(data.x)):
2544	if data.dy != None and len(data.dy) > index:
2545	dy_val = data.dy[index]
2546	else:
2547	dy_val = 0.0
2548	if data.dx != None and len(data.dx) > index:
2549	dx_val = data.dx[index]
2550	else:
2551	dx_val = 0.0
2552	if data.dxl != None and len(data.dxl) > index:
2553	if index == 0:
2554	x_st = "Xl"
2555	dx_val = data.dxl[index]
2556	elif data.dxw != None and len(data.dxw) > index:
2557	if index == 0:
2558	x_st = "Xw"
2559	dx_val = data.dxw[index]
2560
2561	if index == 0:
2562	text += "<index> \t<X> \t<Y> \t<dY> \t<d%s>\n" % x_st
2563	text += "%s \t%s \t%s \t%s \t%s\n" % (index,
2564	data.x[index],
2565	data.y[index],
2566	dy_val,
2567	dx_val)
2568	from pdfview import TextFrame
2569	frame = TextFrame(None, -1, "Data Info: %s" % data.name, text)
2570	# put icon
2571	self.put_icon(frame)
2572	frame.Show(True)
2573
2574	def save_data2d(self, data, fname):
2575	"""
2576	Save data2d dialog
2577	"""
2578	default_name = fname
2579	wildcard = "IGOR/DAT 2D file in Q_map (.dat)\|.DAT"
2580	dlg = wx.FileDialog(self, "Choose a file",
2581	self._default_save_location,
2582	default_name, wildcard, wx.SAVE)
2583
2584	if dlg.ShowModal() == wx.ID_OK:
2585	path = dlg.GetPath()
2586	# ext_num = 0 for .txt, ext_num = 1 for .xml
2587	# This is MAC Fix
2588	ext_num = dlg.GetFilterIndex()
2589	if ext_num == 0:
2590	ext_format = '.dat'
2591	else:
2592	ext_format = ''
2593	path = os.path.splitext(path)[0] + ext_format
2594	mypath = os.path.basename(path)
2595
2596	#Instantiate a loader
2597	loader = Loader()
2598
2599	ext_format = ".dat"
2600	if os.path.splitext(mypath)[1].lower() == ext_format:
2601	# Make sure the ext included in the file name
2602	# especially on MAC
2603	fileName = os.path.splitext(path)[0] + ext_format
2604	loader.save(fileName, data, ext_format)
2605	try:
2606	self._default_save_location = os.path.dirname(path)
2607	except:
2608	pass
2609	dlg.Destroy()
2610
2611	def show_data2d(self, data, name):
2612	"""
2613	Show data dialog
2614	"""
2615	wx.PostEvent(self, StatusEvent(status="Gathering Data2D Info.",
2616	type='start'))
2617	text = data.__str__()
2618	text += 'Data Min Max:\n'
2619	text += 'I_min = %s\n' % min(data.data)
2620	text += 'I_max = %s\n\n' % max(data.data)
2621	text += 'Data (First 2501) Points:\n'
2622	text += 'Data columns include err(I).\n'
2623	text += 'ASCII data starts here.\n'
2624	text += "<index> \t<Qx> \t<Qy> \t<I> \t<dI> \t<dQparal> \t<dQperp>\n"
2625	di_val = 0.0
2626	dx_val = 0.0
2627	dy_val = 0.0
2628	len_data = len(data.qx_data)
2629	for index in xrange(0, len_data):
2630	x_val = data.qx_data[index]
2631	y_val = data.qy_data[index]
2632	i_val = data.data[index]
2633	if data.err_data != None:
2634	di_val = data.err_data[index]
2635	if data.dqx_data != None:
2636	dx_val = data.dqx_data[index]
2637	if data.dqy_data != None:
2638	dy_val = data.dqy_data[index]
2639
2640	text += "%s \t%s \t%s \t%s \t%s \t%s \t%s\n" % (index,
2641	x_val,
2642	y_val,
2643	i_val,
2644	di_val,
2645	dx_val,
2646	dy_val)
2647	# Takes too long time for typical data2d: Break here
2648	if index >= 2500:
2649	text += ".............\n"
2650	break
2651
2652	from pdfview import TextFrame
2653	frame = TextFrame(None, -1, "Data Info: %s" % data.name, text)
2654	# put icon
2655	self.put_icon(frame)
2656	frame.Show(True)
2657	wx.PostEvent(self, StatusEvent(status="Data2D Info Displayed",
2658	type='stop'))
2659
2660	def set_current_perspective(self, perspective):
2661	"""
2662	set the current active perspective
2663	"""
2664	self._current_perspective = perspective
2665	name = "No current analysis selected"
2666	if self._current_perspective is not None:
2667	self._add_current_plugin_menu()
2668	for panel in self.panels.values():
2669	if hasattr(panel, 'CENTER_PANE') and panel.CENTER_PANE:
2670	for name in self._current_perspective.get_perspective():
2671	frame = panel.get_frame()
2672	if frame != None:
2673	if name == panel.window_name:
2674	panel.on_set_focus(event=None)
2675	frame.Show(True)
2676	else:
2677	frame.Show(False)
2678	name = self._current_perspective.sub_menu
2679	if self._data_panel is not None:
2680	self._data_panel.set_active_perspective(name)
2681	self._check_applications_menu()
2682	#Set the SasView title
2683	self._set_title_name(name)
2684
2685	def _set_title_name(self, name):
2686	"""
2687	Set the SasView title w/ the current application name
2688
2689	: param name: application name [string]
2690	"""
2691	# Set SanView Window title w/ application anme
2692	title = self.title + " - " + name + " -"
2693	self.SetTitle(title)
2694
2695	def _check_applications_menu(self):
2696	"""
2697	check the menu of the current application
2698	"""
2699	if self._applications_menu is not None:
2700	for menu in self._applications_menu.GetMenuItems():
2701	if self._current_perspective is not None:
2702	name = self._current_perspective.sub_menu
2703	if menu.IsCheckable():
2704	if menu.GetLabel() == name:
2705	menu.Check(True)
2706	else:
2707	menu.Check(False)
2708
2709	def enable_add_data(self, new_plot):
2710	"""
2711	Enable append data on a plot panel
2712	"""
2713
2714	if self.panel_on_focus not in self._plotting_plugin.plot_panels.values():
2715	return
2716	is_theory = len(self.panel_on_focus.plots) <= 1 and \
2717	self.panel_on_focus.plots.values()[0].__class__.__name__ == "Theory1D"
2718
2719	is_data2d = hasattr(new_plot, 'data')
2720
2721	is_data1d = self.panel_on_focus.__class__.__name__ == "ModelPanel1D"\
2722	and self.panel_on_focus.group_id is not None
2723	has_meta_data = hasattr(new_plot, 'meta_data')
2724
2725	#disable_add_data if the data is being recovered from a saved state file.
2726	is_state_data = False
2727	if has_meta_data:
2728	if 'invstate' in new_plot.meta_data:
2729	is_state_data = True
2730	if 'prstate' in new_plot.meta_data:
2731	is_state_data = True
2732	if 'fitstate' in new_plot.meta_data:
2733	is_state_data = True
2734
2735	return is_data1d and not is_data2d and not is_theory and not is_state_data
2736
2737	def check_multimode(self, perspective=None):
2738	"""
2739	Check the perspective have batch mode capablitity
2740	"""
2741	if perspective == None or self._data_panel == None:
2742	return
2743	flag = perspective.get_batch_capable()
2744	flag_on = perspective.batch_on
2745	if flag:
2746	self._data_panel.rb_single_mode.SetValue(not flag_on)
2747	self._data_panel.rb_batch_mode.SetValue(flag_on)
2748	else:
2749	self._data_panel.rb_single_mode.SetValue(True)
2750	self._data_panel.rb_batch_mode.SetValue(False)
2751	self._data_panel.rb_single_mode.Enable(flag)
2752	self._data_panel.rb_batch_mode.Enable(flag)
2753
2754	def enable_edit_menu(self):
2755	"""
2756	enable menu item under edit menu depending on the panel on focus
2757	"""
2758	if self.cpanel_on_focus is not None and self._edit_menu is not None:
2759	flag = self.cpanel_on_focus.get_undo_flag()
2760	self._edit_menu.Enable(GUIFRAME_ID.UNDO_ID, flag)
2761	flag = self.cpanel_on_focus.get_redo_flag()
2762	self._edit_menu.Enable(GUIFRAME_ID.REDO_ID, flag)
2763	flag = self.cpanel_on_focus.get_copy_flag()
2764	self._edit_menu.Enable(GUIFRAME_ID.COPY_ID, flag)
2765	flag = self.cpanel_on_focus.get_paste_flag()
2766	self._edit_menu.Enable(GUIFRAME_ID.PASTE_ID, flag)
2767
2768	#Copy menu
2769	flag = self.cpanel_on_focus.get_copy_flag()
2770	self._edit_menu_copyas.Enable(GUIFRAME_ID.COPYEX_ID, flag)
2771	self._edit_menu_copyas.Enable(GUIFRAME_ID.COPYLAT_ID, flag)
2772
2773	flag = self.cpanel_on_focus.get_preview_flag()
2774	self._edit_menu.Enable(GUIFRAME_ID.PREVIEW_ID, flag)
2775	flag = self.cpanel_on_focus.get_reset_flag()
2776	self._edit_menu.Enable(GUIFRAME_ID.RESET_ID, flag)
2777	else:
2778	flag = False
2779	self._edit_menu.Enable(GUIFRAME_ID.UNDO_ID, flag)
2780	self._edit_menu.Enable(GUIFRAME_ID.REDO_ID, flag)
2781	self._edit_menu.Enable(GUIFRAME_ID.COPY_ID, flag)
2782	self._edit_menu.Enable(GUIFRAME_ID.PASTE_ID, flag)
2783	self._edit_menu.Enable(GUIFRAME_ID.PREVIEW_ID, flag)
2784	self._edit_menu.Enable(GUIFRAME_ID.RESET_ID, flag)
2785
2786	def on_undo_panel(self, event=None):
2787	"""
2788	undo previous action of the last panel on focus if possible
2789	"""
2790	if self.cpanel_on_focus is not None:
2791	self.cpanel_on_focus.on_undo(event)
2792
2793	def on_redo_panel(self, event=None):
2794	"""
2795	redo the last cancel action done on the last panel on focus
2796	"""
2797	if self.cpanel_on_focus is not None:
2798	self.cpanel_on_focus.on_redo(event)
2799
2800	def on_copy_panel(self, event=None):
2801	"""
2802	copy the last panel on focus if possible
2803	"""
2804	if self.cpanel_on_focus is not None:
2805	self.cpanel_on_focus.on_copy(event)
2806
2807	def on_paste_panel(self, event=None):
2808	"""
2809	paste clipboard to the last panel on focus
2810	"""
2811	if self.cpanel_on_focus is not None:
2812	self.cpanel_on_focus.on_paste(event)
2813
2814	def on_bookmark_panel(self, event=None):
2815	"""
2816	bookmark panel
2817	"""
2818	if self.cpanel_on_focus is not None:
2819	self.cpanel_on_focus.on_bookmark(event)
2820
2821	def append_bookmark(self, event=None):
2822	"""
2823	Bookmark available information of the panel on focus
2824	"""
2825	self._toolbar.append_bookmark(event)
2826
2827	def on_save_panel(self, event=None):
2828	"""
2829	save possible information on the current panel
2830	"""
2831	if self.cpanel_on_focus is not None:
2832	self.cpanel_on_focus.on_save(event)
2833
2834	def on_preview_panel(self, event=None):
2835	"""
2836	preview information on the panel on focus
2837	"""
2838	if self.cpanel_on_focus is not None:
2839	self.cpanel_on_focus.on_preview(event)
2840
2841	def on_print_panel(self, event=None):
2842	"""
2843	print available information on the last panel on focus
2844	"""
2845	if self.cpanel_on_focus is not None:
2846	self.cpanel_on_focus.on_print(event)
2847
2848	def on_zoom_panel(self, event=None):
2849	"""
2850	zoom on the current panel if possible
2851	"""
2852	if self.cpanel_on_focus is not None:
2853	self.cpanel_on_focus.on_zoom(event)
2854
2855	def on_zoom_in_panel(self, event=None):
2856	"""
2857	zoom in of the panel on focus
2858	"""
2859	if self.cpanel_on_focus is not None:
2860	self.cpanel_on_focus.on_zoom_in(event)
2861
2862	def on_zoom_out_panel(self, event=None):
2863	"""
2864	zoom out on the panel on focus
2865	"""
2866	if self.cpanel_on_focus is not None:
2867	self.cpanel_on_focus.on_zoom_out(event)
2868
2869	def on_drag_panel(self, event=None):
2870	"""
2871	drag apply to the panel on focus
2872	"""
2873	if self.cpanel_on_focus is not None:
2874	self.cpanel_on_focus.on_drag(event)
2875
2876	def on_reset_panel(self, event=None):
2877	"""
2878	reset the current panel
2879	"""
2880	if self.cpanel_on_focus is not None:
2881	self.cpanel_on_focus.on_reset(event)
2882
2883	def on_change_caption(self, name, old_caption, new_caption):
2884	"""
2885	Change the panel caption
2886
2887	:param name: window_name of the pane
2888	:param old_caption: current caption [string]
2889	:param new_caption: new caption [string]
2890	"""
2891	# wx.aui.AuiPaneInfo
2892	pane_info = self.get_paneinfo(old_caption)
2893	# update the data_panel.cb_plotpanel
2894	if 'data_panel' in self.panels.keys():
2895	# remove from data_panel combobox
2896	data_panel = self.panels["data_panel"]
2897	if data_panel.cb_plotpanel is not None:
2898	# Check if any panel has the same caption
2899	has_newstring = data_panel.cb_plotpanel.FindString\
2900	(str(new_caption))
2901	caption = new_caption
2902	if has_newstring != wx.NOT_FOUND:
2903	captions = self._get_plotpanel_captions()
2904	# Append nummber
2905	inc = 1
2906	# FIXME: fix this terrible loop
2907	while (1):
2908	caption = new_caption + '_%s' % str(inc)
2909	if caption not in captions:
2910	break
2911	inc += 1
2912	# notify to users
2913	msg = "Found Same Title: Added '_%s'" % str(inc)
2914	wx.PostEvent(self, StatusEvent(status=msg))
2915	# update data_panel cb
2916	pos = data_panel.cb_plotpanel.FindString(str(old_caption))
2917	if pos != wx.NOT_FOUND:
2918	data_panel.cb_plotpanel.SetString(pos, caption)
2919	data_panel.cb_plotpanel.SetStringSelection(caption)
2920	# New Caption
2921	pane_info.SetTitle(caption)
2922	return caption
2923
2924	def get_paneinfo(self, name):
2925	"""
2926	Get pane Caption from window_name
2927
2928	:param name: window_name in AuiPaneInfo
2929	:returns: AuiPaneInfo of the name
2930	"""
2931	for panel in self.plot_panels.values():
2932	if panel.frame.GetTitle() == name:
2933	return panel.frame
2934	return None
2935
2936	def enable_undo(self):
2937	"""
2938	enable undo related control
2939	"""
2940	if self.cpanel_on_focus is not None:
2941	self._toolbar.enable_undo(self.cpanel_on_focus)
2942
2943	def enable_redo(self):
2944	"""
2945	enable redo
2946	"""
2947	if self.cpanel_on_focus is not None:
2948	self._toolbar.enable_redo(self.cpanel_on_focus)
2949
2950	def enable_copy(self):
2951	"""
2952	enable copy related control
2953	"""
2954	if self.cpanel_on_focus is not None:
2955	self._toolbar.enable_copy(self.cpanel_on_focus)
2956
2957	def enable_paste(self):
2958	"""
2959	enable paste
2960	"""
2961	if self.cpanel_on_focus is not None:
2962	self._toolbar.enable_paste(self.cpanel_on_focus)
2963
2964	def enable_bookmark(self):
2965	"""
2966	Bookmark
2967	"""
2968	if self.cpanel_on_focus is not None:
2969	self._toolbar.enable_bookmark(self.cpanel_on_focus)
2970
2971	def enable_save(self):
2972	"""
2973	save
2974	"""
2975	if self.cpanel_on_focus is not None:
2976	self._toolbar.enable_save(self.cpanel_on_focus)
2977
2978	def enable_preview(self):
2979	"""
2980	preview
2981	"""
2982	if self.cpanel_on_focus is not None:
2983	self._toolbar.enable_preview(self.cpanel_on_focus)
2984
2985	def enable_print(self):
2986	"""
2987	print
2988	"""
2989	if self.cpanel_on_focus is not None:
2990	self._toolbar.enable_print(self.cpanel_on_focus)
2991
2992	def enable_zoom(self):
2993	"""
2994	zoom
2995	"""
2996	if self.cpanel_on_focus is not None:
2997	self._toolbar.enable_zoom(self.panel_on_focus)
2998
2999	def enable_zoom_in(self):
3000	"""
3001	zoom in
3002	"""
3003	if self.cpanel_on_focus is not None:
3004	self._toolbar.enable_zoom_in(self.panel_on_focus)
3005
3006	def enable_zoom_out(self):
3007	"""
3008	zoom out
3009	"""
3010	if self.cpanel_on_focus is not None:
3011	self._toolbar.enable_zoom_out(self.panel_on_focus)
3012
3013	def enable_drag(self, event=None):
3014	"""
3015	drag
3016	"""
3017	#Not implemeted
3018
3019	def enable_reset(self):
3020	"""
3021	reset the current panel
3022	"""
3023	if self.cpanel_on_focus is not None:
3024	self._toolbar.enable_reset(self.panel_on_focus)
3025
3026	def get_toolbar_height(self):
3027	"""
3028	"""
3029	size_y = 0
3030	if self.GetToolBar() != None and self.GetToolBar().IsShown():
3031	if not IS_LINUX:
3032	_, size_y = self.GetToolBar().GetSizeTuple()
3033	return size_y
3034
3035	def set_schedule_full_draw(self, panel=None, func='del'):
3036	"""
3037	Add/subtract the schedule full draw list with the panel given
3038
3039	:param panel: plot panel
3040	:param func: append or del [string]
3041	"""
3042
3043	# append this panel in the schedule list if not in yet
3044	if func == 'append':
3045	if not panel in self.schedule_full_draw_list:
3046	self.schedule_full_draw_list.append(panel)
3047	# remove this panel from schedule list
3048	elif func == 'del':
3049	if len(self.schedule_full_draw_list) > 0:
3050	if panel in self.schedule_full_draw_list:
3051	self.schedule_full_draw_list.remove(panel)
3052
3053	# reset the schdule
3054	if len(self.schedule_full_draw_list) == 0:
3055	self.schedule = False
3056	else:
3057	self.schedule = True
3058
3059	def full_draw(self):
3060	"""
3061	Draw the panels with axes in the schedule to full dwar list
3062	"""
3063
3064	count = len(self.schedule_full_draw_list)
3065	#if not self.schedule:
3066	if count < 1:
3067	self.set_schedule(False)
3068	return
3069
3070	else:
3071	ind = 0
3072	# if any of the panel is shown do full_draw
3073	for panel in self.schedule_full_draw_list:
3074	ind += 1
3075	if panel.frame.IsShown():
3076	break
3077	# otherwise, return
3078	if ind == count:
3079	return
3080	#Simple redraw only for a panel shown
3081	def f_draw(panel):
3082	"""
3083	Draw A panel in the full draw list
3084	"""
3085	try:
3086	# This checking of GetCapture is to stop redrawing
3087	# while any panel is capture.
3088	frame = panel.frame
3089
3090	if not frame.GetCapture():
3091	# draw if possible
3092	panel.set_resizing(False)
3093	#panel.Show(True)
3094	panel.draw_plot()
3095	# Check if the panel is not shown
3096	flag = frame.IsShown()
3097	frame.Show(flag)
3098	except:
3099	pass
3100
3101	# Draw all panels
3102	if count == 1:
3103	f_draw(self.schedule_full_draw_list[0])
3104	else:
3105	map(f_draw, self.schedule_full_draw_list)
3106	# Reset the attr
3107	if len(self.schedule_full_draw_list) == 0:
3108	self.set_schedule(False)
3109	else:
3110	self.set_schedule(True)
3111
3112	def set_schedule(self, schedule=False):
3113	"""
3114	Set schedule
3115	"""
3116	self.schedule = schedule
3117
3118	def get_schedule(self):
3119	"""
3120	Get schedule
3121	"""
3122	return self.schedule
3123
3124	def on_set_plot_focus(self, panel):
3125	"""
3126	Set focus on a plot panel
3127	"""
3128	if panel == None:
3129	return
3130	#self.set_plot_unfocus()
3131	panel.on_set_focus(None)
3132	# set focusing panel
3133	self.panel_on_focus = panel
3134	self.set_panel_on_focus(None)
3135
3136	def set_plot_unfocus(self):
3137	"""
3138	Un focus all plot panels
3139	"""
3140	for plot in self.plot_panels.values():
3141	plot.on_kill_focus(None)
3142
3143	def get_window_size(self):
3144	"""
3145	Get window size
3146
3147	:returns: size
3148	:rtype: tuple
3149	"""
3150	width, height = self.GetSizeTuple()
3151	if not IS_WIN:
3152	# Subtract toolbar height to get real window side
3153	if self._toolbar.IsShown():
3154	height -= 45
3155	return (width, height)
3156
3157	def _onDrawIdle(self, args, *kwargs):
3158	"""
3159	ReDraw with axes
3160	"""
3161	try:
3162	# check if it is time to redraw
3163	if self.GetCapture() == None:
3164	# Draw plot, changes resizing too
3165	self.full_draw()
3166	except:
3167	pass
3168
3169	# restart idle
3170	self._redraw_idle(args, *kwargs)
3171
3172
3173	def _redraw_idle(self, args, *kwargs):
3174	"""
3175	Restart Idle
3176	"""
3177	# restart idle
3178	self.idletimer.Restart(100 * TIME_FACTOR, args, *kwargs)
3179
3180
3181	class DefaultPanel(wx.Panel, PanelBase):
3182	"""
3183	Defines the API for a panels to work with
3184	the GUI manager
3185	"""
3186	## Internal nickname for the window, used by the AUI manager
3187	window_name = "default"
3188	## Name to appear on the window title bar
3189	window_caption = "Welcome panel"
3190	## Flag to tell the AUI manager to put this panel in the center pane
3191	CENTER_PANE = True
3192	def __init__(self, parent, args, *kwds):
3193	wx.Panel.__init__(self, parent, args, *kwds)
3194	PanelBase.__init__(self, parent)
3195
3196
3197
3198	class SasViewApp(wx.App):
3199	"""
3200	SasView application
3201	"""
3202	def OnInit(self):
3203	"""
3204	When initialised
3205	"""
3206	pos, size, self.is_max = self.window_placement((GUIFRAME_WIDTH,
3207	GUIFRAME_HEIGHT))
3208	self.frame = ViewerFrame(parent=None,
3209	title=APPLICATION_NAME,
3210	pos=pos,
3211	gui_style=DEFAULT_STYLE,
3212	size=size)
3213	self.frame.Hide()
3214	if not IS_WIN:
3215	self.frame.EnableCloseButton(False)
3216	self.s_screen = None
3217
3218	try:
3219	self.open_file()
3220	except:
3221	msg = "%s Could not load " % str(APPLICATION_NAME)
3222	msg += "input file from command line.\n"
3223	logging.error(msg)
3224	# Display a splash screen on top of the frame.
3225	try:
3226	if os.path.isfile(SPLASH_SCREEN_PATH):
3227	self.s_screen = self.display_splash_screen(parent=self.frame,
3228	path=SPLASH_SCREEN_PATH)
3229	else:
3230	self.frame.Show()
3231	except:
3232	if self.s_screen is not None:
3233	self.s_screen.Close()
3234	msg = "Cannot display splash screen\n"
3235	msg += str(sys.exc_value)
3236	logging.error(msg)
3237	self.frame.Show()
3238
3239	self.SetTopWindow(self.frame)
3240
3241	return True
3242
3243	def maximize_win(self):
3244	"""
3245	Maximize the window after the frame shown
3246	"""
3247	if self.is_max:
3248	if self.frame.IsShown():
3249	# Max window size
3250	self.frame.Maximize(self.is_max)
3251
3252	def open_file(self):
3253	"""
3254	open a state file at the start of the application
3255	"""
3256	input_file = None
3257	if len(sys.argv) >= 2:
3258	cmd = sys.argv[0].lower()
3259	basename = os.path.basename(cmd)
3260	app_base = str(APPLICATION_NAME).lower()
3261	if os.path.isfile(cmd) or basename.lower() == app_base:
3262	app_py = app_base + '.py'
3263	app_exe = app_base + '.exe'
3264	app_app = app_base + '.app'
3265	if basename.lower() in [app_py, app_exe, app_app, app_base]:
3266	data_base = sys.argv[1]
3267	input_file = os.path.normpath(os.path.join(DATAPATH,
3268	data_base))
3269	if input_file is None:
3270	return
3271	if self.frame is not None:
3272	self.frame.set_input_file(input_file=input_file)
3273
3274	def clean_plugin_models(self, path):
3275	"""
3276	Delete plugin models in app folder
3277
3278	:param path: path of the plugin_models folder in app
3279	"""
3280	# do it only the first time app loaded
3281	# delete unused model folder
3282	model_folder = os.path.join(PATH_APP, path)
3283	if os.path.exists(model_folder) and os.path.isdir(model_folder):
3284	if len(os.listdir(model_folder)) > 0:
3285	try:
3286	for filename in os.listdir(model_folder):
3287	file_path = os.path.join(model_folder, filename)
3288	if os.path.isfile(file_path):
3289	os.remove(file_path)
3290	except:
3291	logging.error("gui_manager.clean_plugin_models:\n %s" \
3292	% sys.exc_value)
3293
3294	def set_manager(self, manager):
3295	"""
3296	Sets a reference to the application manager
3297	of the GUI manager (Frame)
3298	"""
3299	self.frame.set_manager(manager)
3300
3301	def build_gui(self):
3302	"""
3303	Build the GUI
3304	"""
3305	#try to load file at the start
3306	self.open_file()
3307	self.frame.build_gui()
3308
3309	def set_welcome_panel(self, panel_class):
3310	"""
3311	Set the welcome panel
3312
3313	:param panel_class: class of the welcome panel to be instantiated
3314
3315	"""
3316	self.frame.welcome_panel_class = panel_class
3317
3318	def add_perspective(self, perspective):
3319	"""
3320	Manually add a perspective to the application GUI
3321	"""
3322	self.frame.add_perspective(perspective)
3323
3324	def window_placement(self, size):
3325	"""
3326	Determines the position and size of the application frame such that it
3327	fits on the user's screen without obstructing (or being obstructed by)
3328	the Windows task bar. The maximum initial size in pixels is bounded by
3329	WIDTH x HEIGHT. For most monitors, the application
3330	will be centered on the screen; for very large monitors it will be
3331	placed on the left side of the screen.
3332	"""
3333	is_maximized = False
3334	# Get size of screen without
3335	for screenCount in range(wx.Display().GetCount()):
3336	screen = wx.Display(screenCount)
3337	if screen.IsPrimary():
3338	displayRect = screen.GetClientArea()
3339	break
3340
3341	posX, posY, displayWidth, displayHeight = displayRect
3342	customWidth, customHeight = size
3343
3344	# If the custom size is default, set 90% of the screen size
3345	if customWidth <= 0 and customHeight <= 0:
3346	if customWidth == 0 and customHeight == 0:
3347	is_maximized = True
3348	customWidth = displayWidth * 0.9
3349	customHeight = displayHeight * 0.9
3350	else:
3351	# If the custom screen is bigger than the
3352	# window screen than make maximum size
3353	if customWidth > displayWidth:
3354	customWidth = displayWidth
3355	if customHeight > displayHeight:
3356	customHeight = displayHeight
3357
3358	# Note that when running Linux and using an Xming (X11) server on a PC
3359	# with a dual monitor configuration, the reported display size may be
3360	# that of both monitors combined with an incorrect display count of 1.
3361	# To avoid displaying this app across both monitors, we check for
3362	# screen 'too big'. If so, we assume a smaller width which means the
3363	# application will be placed towards the left hand side of the screen.
3364
3365	# If dual screen registered as 1 screen. Make width half.
3366	# MAC just follows the default behavior of pos
3367	if IS_WIN:
3368	if displayWidth > (displayHeight * 2):
3369	if customWidth == displayWidth:
3370	customWidth = displayWidth / 2
3371	# and set the position to be the corner of the screen.
3372	posX = 0
3373	posY = 0
3374
3375	# Make the position the middle of the screen. (Not 0,0)
3376	else:
3377	posX = (displayWidth - customWidth) / 2
3378	posY = (displayHeight - customHeight) / 2
3379	# Return the suggested position and size for the application frame.
3380	return (posX, posY), (customWidth, customHeight), is_maximized
3381
3382
3383	def display_splash_screen(self, parent,
3384	path=SPLASH_SCREEN_PATH):
3385	"""Displays the splash screen. It will exactly cover the main frame."""
3386
3387	# Prepare the picture. On a 2GHz intel cpu, this takes about a second.
3388	image = wx.Image(path, wx.BITMAP_TYPE_PNG)
3389	image.Rescale(SPLASH_SCREEN_WIDTH,
3390	SPLASH_SCREEN_HEIGHT, wx.IMAGE_QUALITY_HIGH)
3391	bm = image.ConvertToBitmap()
3392
3393	# Create and show the splash screen. It will disappear only when the
3394	# program has entered the event loop AND either the timeout has expired
3395	# or the user has left clicked on the screen. Thus any processing
3396	# performed in this routine (including sleeping) or processing in the
3397	# calling routine (including doing imports) will prevent the splash
3398	# screen from disappearing.
3399	#
3400	# Note that on Linux, the timeout appears to occur immediately in which
3401	# case the splash screen disappears upon entering the event loop.
3402	s_screen = wx.SplashScreen(bitmap=bm,
3403	splashStyle=(wx.SPLASH_TIMEOUT \|
3404	wx.SPLASH_CENTRE_ON_SCREEN),
3405	style=(wx.SIMPLE_BORDER \|
3406	wx.FRAME_NO_TASKBAR \|
3407	wx.FRAME_FLOAT_ON_PARENT),
3408	milliseconds=SS_MAX_DISPLAY_TIME,
3409	parent=parent,
3410	id=wx.ID_ANY)
3411	from sas.sasgui.guiframe.gui_statusbar import SPageStatusbar
3412	statusBar = SPageStatusbar(s_screen)
3413	s_screen.SetStatusBar(statusBar)
3414	s_screen.Bind(wx.EVT_CLOSE, self.on_close_splash_screen)
3415	s_screen.Show()
3416	return s_screen
3417
3418
3419	def on_close_splash_screen(self, event):
3420	"""
3421	When the splash screen is closed.
3422	"""
3423	self.frame.Show(True)
3424	event.Skip()
3425	self.maximize_win()
3426
3427
3428	class MDIFrame(CHILD_FRAME):
3429	"""
3430	Frame for panels
3431	"""
3432	def __init__(self, parent, panel, title="Untitled", size=(300, 200)):
3433	"""
3434	comment
3435	:param parent: parent panel/container
3436	"""
3437	# Initialize the Frame object
3438	CHILD_FRAME.__init__(self, parent=parent, id=wx.ID_ANY, title=title, size=size)
3439	self.parent = parent
3440	self.name = "Untitled"
3441	self.batch_on = self.parent.batch_on
3442	self.panel = panel
3443	if panel != None:
3444	self.set_panel(panel)
3445	self.Show(False)
3446
3447	def show_data_panel(self, action):
3448	"""
3449	Turns on the data panel
3450
3451	The the data panel is optional. Most of its functions can be
3452	performed from the menu bar and from the plots.
3453	"""
3454	self.parent.show_data_panel(action)
3455
3456	def set_panel(self, panel):
3457	"""
3458	"""
3459	self.panel = panel
3460	self.name = panel.window_name
3461	self.SetTitle(panel.window_caption)
3462	self.SetHelpText(panel.help_string)
3463	width, height = self.parent._get_panels_size(panel)
3464	if hasattr(panel, "CENTER_PANE") and panel.CENTER_PANE:
3465	width *= 0.6
3466	self.SetSize((width, height))
3467	self.parent.put_icon(self)
3468	self.Bind(wx.EVT_SET_FOCUS, self.set_panel_focus)
3469	self.Bind(wx.EVT_CLOSE, self.OnClose)
3470	self.Show(False)
3471
3472	def set_panel_focus(self, event):
3473	"""
3474	"""
3475	if self.parent.panel_on_focus != self.panel:
3476	self.panel.SetFocus()
3477	self.parent.panel_on_focus = self.panel
3478
3479	def OnClose(self, event):
3480	"""
3481	On Close event
3482	"""
3483	self.panel.on_close(event)
3484
3485	if __name__ == "__main__":
3486	app = SasViewApp(0)
3487	app.MainLoop()

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/src/sas/sasgui/guiframe/gui_manager.py @ 998ca90

Download in other formats: