source: sasview/src/sas/sascalc/dataloader/readers/cansas_reader.py @ 1686a333

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2release_4.0.1ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload
Last change on this file since 1686a333 was 1686a333, checked in by krzywon, 8 years ago

Added compatibility with save/load projects and analysis.

  • Property mode set to 100644
File size: 60.6 KB
Line 
1"""
2    CanSAS data reader - new recursive cansas_version.
3"""
4############################################################################
5#This software was developed by the University of Tennessee as part of the
6#Distributed Data Analysis of Neutron Scattering Experiments (DANSE)
7#project funded by the US National Science Foundation.
8#If you use DANSE applications to do scientific research that leads to
9#publication, we ask that you acknowledge the use of the software with the
10#following sentence:
11#This work benefited from DANSE software developed under NSF award DMR-0520547.
12#copyright 2008,2009 University of Tennessee
13#############################################################################
14
15import logging
16import numpy as np
17import os
18import sys
19import datetime
20import inspect
21# For saving individual sections of data
22from sas.sascalc.dataloader.data_info import Data1D, DataInfo, plottable_1D
23from sas.sascalc.dataloader.data_info import Collimation, TransmissionSpectrum, Detector, Process, Aperture
24from sas.sascalc.dataloader.data_info import combine_data_info_with_plottable as combine_data
25import sas.sascalc.dataloader.readers.xml_reader as xml_reader
26from sas.sascalc.dataloader.readers.xml_reader import XMLreader
27from sas.sascalc.dataloader.readers.cansas_constants import CansasConstants, CurrentLevel
28
29# The following 2 imports *ARE* used. Do not remove either.
30import xml.dom.minidom
31from xml.dom.minidom import parseString
32
33PREPROCESS = "xmlpreprocess"
34ENCODING = "encoding"
35RUN_NAME_DEFAULT = "None"
36INVALID_SCHEMA_PATH_1_1 = "{0}/sas/sascalc/dataloader/readers/schema/cansas1d_invalid_v1_1.xsd"
37INVALID_SCHEMA_PATH_1_0 = "{0}/sas/sascalc/dataloader/readers/schema/cansas1d_invalid_v1_0.xsd"
38INVALID_XML = "\n\nThe loaded xml file, {0} does not fully meet the CanSAS v1.x specification. SasView loaded " + \
39              "as much of the data as possible.\n\n"
40HAS_CONVERTER = True
41try:
42    from sas.sascalc.data_util.nxsunit import Converter
43except ImportError:
44    HAS_CONVERTER = False
45
46CONSTANTS = CansasConstants()
47CANSAS_FORMAT = CONSTANTS.format
48CANSAS_NS = CONSTANTS.names
49ALLOW_ALL = True
50
51class Reader(XMLreader):
52    """
53    Class to load cansas 1D XML files
54
55    :Dependencies:
56        The CanSAS reader requires PyXML 0.8.4 or later.
57    """
58    ## CanSAS version - defaults to version 1.0
59    cansas_version = "1.0"
60    base_ns = "{cansas1d/1.0}"
61    cansas_defaults = None
62    type_name = "canSAS"
63    invalid = True
64    ## Log messages and errors
65    logging = None
66    errors = set()
67    ## Namespace hierarchy for current xml_file object
68    names = None
69    ns_list = None
70    ## Temporary storage location for loading multiple data sets in a single file
71    current_datainfo = None
72    current_dataset = None
73    current_data1d = None
74    data = None
75    ## List of data1D objects to be sent back to SasView
76    output = None
77    ## Wildcards
78    type = ["XML files (*.xml)|*.xml", "SasView Save Files (*.svs)|*.svs"]
79    ## List of allowed extensions
80    ext = ['.xml', '.XML', '.svs', '.SVS']
81    ## Flag to bypass extension check
82    allow_all = True
83
84    def reset_state(self):
85        """
86        Resets the class state to a base case when loading a new data file so previous
87        data files do not appear a second time
88        """
89        self.current_datainfo = None
90        self.current_dataset = None
91        self.current_data1d = None
92        self.data = []
93        self.process = Process()
94        self.transspectrum = TransmissionSpectrum()
95        self.aperture = Aperture()
96        self.collimation = Collimation()
97        self.detector = Detector()
98        self.names = []
99        self.cansas_defaults = {}
100        self.output = []
101        self.ns_list = None
102        self.logging = []
103        self.encoding = None
104
105    def read(self, xml_file, schema_path="", invalid=True):
106        """
107        Validate and read in an xml_file file in the canSAS format.
108
109        :param xml_file: A canSAS file path in proper XML format
110        :param schema_path: A file path to an XML schema to validate the xml_file against
111        """
112        # For every file loaded, reset everything to a base state
113        self.reset_state()
114        self.invalid = invalid
115        # Check that the file exists
116        if os.path.isfile(xml_file):
117            basename, extension = os.path.splitext(os.path.basename(xml_file))
118            # If the file type is not allowed, return nothing
119            if extension in self.ext or self.allow_all:
120                # Get the file location of
121                self.load_file_and_schema(xml_file, schema_path)
122                self.add_data_set()
123                # Try to load the file, but raise an error if unable to.
124                # Check the file matches the XML schema
125                try:
126                    self.is_cansas(extension)
127                    self.invalid = False
128                    # Get each SASentry from XML file and add it to a list.
129                    entry_list = self.xmlroot.xpath(
130                            '/ns:SASroot/ns:SASentry',
131                            namespaces={'ns': self.cansas_defaults.get("ns")})
132                    self.names.append("SASentry")
133
134                    # Get all preprocessing events and encoding
135                    self.set_processing_instructions()
136
137                    # Parse each <SASentry> item
138                    for entry in entry_list:
139                        # Create a new DataInfo object for every <SASentry>
140
141
142                        # Set the file name and then parse the entry.
143                        self.current_datainfo.filename = basename + extension
144                        self.current_datainfo.meta_data["loader"] = "CanSAS XML 1D"
145                        self.current_datainfo.meta_data[PREPROCESS] = \
146                            self.processing_instructions
147
148                        # Parse the XML SASentry
149                        self._parse_entry(entry)
150                        # Combine datasets with datainfo
151                        self.add_data_set()
152                except RuntimeError:
153                    # If the file does not match the schema, raise this error
154                    invalid_xml = self.find_invalid_xml()
155                    invalid_xml = INVALID_XML.format(basename + extension) + invalid_xml
156                    self.errors.add(invalid_xml)
157                    # Try again with an invalid CanSAS schema, that requires only a data set in each
158                    base_name = xml_reader.__file__
159                    base_name = base_name.replace("\\", "/")
160                    base = base_name.split("/sas/")[0]
161                    if self.cansas_version == "1.1":
162                        invalid_schema = INVALID_SCHEMA_PATH_1_1.format(base, self.cansas_defaults.get("schema"))
163                    else:
164                        invalid_schema = INVALID_SCHEMA_PATH_1_0.format(base, self.cansas_defaults.get("schema"))
165                    self.set_schema(invalid_schema)
166                    try:
167                        if self.invalid:
168                            if self.is_cansas():
169                                self.output = self.read(xml_file, invalid_schema, False)
170                            else:
171                                raise RuntimeError
172                        else:
173                            raise RuntimeError
174                    except RuntimeError:
175                        x = np.zeros(1)
176                        y = np.zeros(1)
177                        self.current_data1d = Data1D(x,y)
178                        self.current_data1d.errors = self.errors
179                        return [self.current_data1d]
180        else:
181            self.output.append("Not a valid file path.")
182        # Return a list of parsed entries that dataloader can manage
183        return self.output
184
185    def _parse_entry(self, dom):
186        """
187        Parse a SASEntry - new recursive method for parsing the dom of
188            the CanSAS data format. This will allow multiple data files
189            and extra nodes to be read in simultaneously.
190
191        :param dom: dom object with a namespace base of names
192        """
193
194        frm = inspect.stack()[1]
195        if not self._is_call_local(frm):
196            self.reset_state()
197            self.add_data_set()
198            self.names.append("SASentry")
199            self.parent_class = "SASentry"
200        self._check_for_empty_data()
201        self.base_ns = "{0}{1}{2}".format("{", \
202                            CANSAS_NS.get(self.cansas_version).get("ns"), "}")
203        tagname = ''
204        tagname_original = ''
205
206        # Go through each child in the parent element
207        for node in dom:
208            # Get the element name and set the current names level
209            tagname = node.tag.replace(self.base_ns, "")
210            tagname_original = tagname
211            # Skip this iteration when loading in save state information
212            if tagname == "fitting_plug_in" or tagname == "pr_inversion" or tagname == "invariant":
213                continue
214
215            # Get where to store content
216            self.names.append(tagname_original)
217            self.ns_list = CONSTANTS.iterate_namespace(self.names)
218            # If the element is a child element, recurse
219            if len(node.getchildren()) > 0:
220                self.parent_class = tagname_original
221                if tagname == 'SASdata':
222                    self._initialize_new_data_set()
223                ## Recursion step to access data within the group
224                self._parse_entry(node)
225                self.add_intermediate()
226            else:
227                data_point, unit = self._get_node_value(node, tagname)
228
229                ## If this is a dataset, store the data appropriately
230                if tagname == 'Run':
231                    self.current_datainfo.run.append(data_point)
232                elif tagname == 'Title':
233                    self.current_datainfo.title = data_point
234                elif tagname == 'SASnote':
235                    self.current_datainfo.notes.append(data_point)
236
237                ## I and Q Data
238                elif tagname == 'I':
239                    self.current_dataset.yaxis("Intensity", unit)
240                    self.current_dataset.y = np.append(self.current_dataset.y, data_point)
241                elif tagname == 'Idev':
242                    self.current_dataset.dy = np.append(self.current_dataset.dy, data_point)
243                elif tagname == 'Q':
244                    self.current_dataset.xaxis("Q", unit)
245                    self.current_dataset.x = np.append(self.current_dataset.x, data_point)
246                elif tagname == 'Qdev':
247                    self.current_dataset.dx = np.append(self.current_dataset.dx, data_point)
248                elif tagname == 'dQw':
249                    self.current_dataset.dxw = np.append(self.current_dataset.dxw, data_point)
250                elif tagname == 'dQl':
251                    self.current_dataset.dxl = np.append(self.current_dataset.dxl, data_point)
252                elif tagname == 'Qmean':
253                    pass
254                elif tagname == 'Shadowfactor':
255                    pass
256
257                ## Sample Information
258                elif tagname == 'ID' and self.parent_class == 'SASsample':
259                    self.current_datainfo.sample.ID = data_point
260                elif tagname == 'Title' and self.parent_class == 'SASsample':
261                    self.current_datainfo.sample.name = data_point
262                elif tagname == 'thickness' and self.parent_class == 'SASsample':
263                    self.current_datainfo.sample.thickness = data_point
264                    self.current_datainfo.sample.thickness_unit = unit
265                elif tagname == 'transmission' and self.parent_class == 'SASsample':
266                    self.current_datainfo.sample.transmission = data_point
267                elif tagname == 'temperature' and self.parent_class == 'SASsample':
268                    self.current_datainfo.sample.temperature = data_point
269                    self.current_datainfo.sample.temperature_unit = unit
270                elif tagname == 'details' and self.parent_class == 'SASsample':
271                    self.current_datainfo.sample.details.append(data_point)
272                elif tagname == 'x' and self.parent_class == 'position':
273                    self.current_datainfo.sample.position.x = data_point
274                    self.current_datainfo.sample.position_unit = unit
275                elif tagname == 'y' and self.parent_class == 'position':
276                    self.current_datainfo.sample.position.y = data_point
277                    self.current_datainfo.sample.position_unit = unit
278                elif tagname == 'z' and self.parent_class == 'position':
279                    self.current_datainfo.sample.position.z = data_point
280                    self.current_datainfo.sample.position_unit = unit
281                elif tagname == 'roll' and self.parent_class == 'orientation' and 'SASsample' in self.names:
282                    self.current_datainfo.sample.orientation.x = data_point
283                    self.current_datainfo.sample.orientation_unit = unit
284                elif tagname == 'pitch' and self.parent_class == 'orientation' and 'SASsample' in self.names:
285                    self.current_datainfo.sample.orientation.y = data_point
286                    self.current_datainfo.sample.orientation_unit = unit
287                elif tagname == 'yaw' and self.parent_class == 'orientation' and 'SASsample' in self.names:
288                    self.current_datainfo.sample.orientation.z = data_point
289                    self.current_datainfo.sample.orientation_unit = unit
290
291                ## Instrumental Information
292                elif tagname == 'name' and self.parent_class == 'SASinstrument':
293                    self.current_datainfo.instrument = data_point
294                ## Detector Information
295                elif tagname == 'name' and self.parent_class == 'SASdetector':
296                    self.detector.name = data_point
297                elif tagname == 'SDD' and self.parent_class == 'SASdetector':
298                    self.detector.distance = data_point
299                    self.detector.distance_unit = unit
300                elif tagname == 'slit_length' and self.parent_class == 'SASdetector':
301                    self.detector.slit_length = data_point
302                    self.detector.slit_length_unit = unit
303                elif tagname == 'x' and self.parent_class == 'offset':
304                    self.detector.offset.x = data_point
305                    self.detector.offset_unit = unit
306                elif tagname == 'y' and self.parent_class == 'offset':
307                    self.detector.offset.y = data_point
308                    self.detector.offset_unit = unit
309                elif tagname == 'z' and self.parent_class == 'offset':
310                    self.detector.offset.z = data_point
311                    self.detector.offset_unit = unit
312                elif tagname == 'x' and self.parent_class == 'beam_center':
313                    self.detector.beam_center.x = data_point
314                    self.detector.beam_center_unit = unit
315                elif tagname == 'y' and self.parent_class == 'beam_center':
316                    self.detector.beam_center.y = data_point
317                    self.detector.beam_center_unit = unit
318                elif tagname == 'z' and self.parent_class == 'beam_center':
319                    self.detector.beam_center.z = data_point
320                    self.detector.beam_center_unit = unit
321                elif tagname == 'x' and self.parent_class == 'pixel_size':
322                    self.detector.pixel_size.x = data_point
323                    self.detector.pixel_size_unit = unit
324                elif tagname == 'y' and self.parent_class == 'pixel_size':
325                    self.detector.pixel_size.y = data_point
326                    self.detector.pixel_size_unit = unit
327                elif tagname == 'z' and self.parent_class == 'pixel_size':
328                    self.detector.pixel_size.z = data_point
329                    self.detector.pixel_size_unit = unit
330                elif tagname == 'roll' and self.parent_class == 'orientation' and 'SASdetector' in self.names:
331                    self.detector.orientation.x = data_point
332                    self.detector.orientation_unit = unit
333                elif tagname == 'pitch' and self.parent_class == 'orientation' and 'SASdetector' in self.names:
334                    self.detector.orientation.y = data_point
335                    self.detector.orientation_unit = unit
336                elif tagname == 'yaw' and self.parent_class == 'orientation' and 'SASdetector' in self.names:
337                    self.detector.orientation.z = data_point
338                    self.detector.orientation_unit = unit
339                ## Collimation and Aperture
340                elif tagname == 'length' and self.parent_class == 'SAScollimation':
341                    self.collimation.length = data_point
342                    self.collimation.length_unit = unit
343                elif tagname == 'name' and self.parent_class == 'SAScollimation':
344                    self.collimation.name = data_point
345                elif tagname == 'distance' and self.parent_class == 'aperture':
346                    self.aperture.distance = data_point
347                    self.aperture.distance_unit = unit
348                elif tagname == 'x' and self.parent_class == 'size':
349                    self.aperture.size.x = data_point
350                    self.collimation.size_unit = unit
351                elif tagname == 'y' and self.parent_class == 'size':
352                    self.aperture.size.y = data_point
353                    self.collimation.size_unit = unit
354                elif tagname == 'z' and self.parent_class == 'size':
355                    self.aperture.size.z = data_point
356                    self.collimation.size_unit = unit
357
358                ## Process Information
359                elif tagname == 'name' and self.parent_class == 'SASprocess':
360                    self.process.name = data_point
361                elif tagname == 'description' and self.parent_class == 'SASprocess':
362                    self.process.description = data_point
363                elif tagname == 'date' and self.parent_class == 'SASprocess':
364                    try:
365                        self.process.date = datetime.datetime.fromtimestamp(data_point)
366                    except:
367                        self.process.date = data_point
368                elif tagname == 'SASprocessnote':
369                    self.process.notes.append(data_point)
370                elif tagname == 'term' and self.parent_class == 'SASprocess':
371                    self.process.term.append(data_point)
372
373                ## Transmission Spectrum
374                elif tagname == 'T' and self.parent_class == 'Tdata':
375                    self.transspectrum.transmission = np.append(self.transspectrum.transmission, data_point)
376                    self.transspectrum.transmission_unit = unit
377                elif tagname == 'Tdev' and self.parent_class == 'Tdata':
378                    self.transspectrum.transmission_deviation = np.append(self.transspectrum.transmission_deviation, data_point)
379                    self.transspectrum.transmission_deviation_unit = unit
380                elif tagname == 'Lambda' and self.parent_class == 'Tdata':
381                    self.transspectrum.wavelength = np.append(self.transspectrum.wavelength, data_point)
382                    self.transspectrum.wavelength_unit = unit
383
384                ## Source Information
385                elif tagname == 'wavelength' and (self.parent_class == 'SASsource' or self.parent_class == 'SASData'):
386                    self.current_datainfo.source.wavelength = data_point
387                    self.current_datainfo.source.wavelength_unit = unit
388                elif tagname == 'wavelength_min' and self.parent_class == 'SASsource':
389                    self.current_datainfo.source.wavelength_min = data_point
390                    self.current_datainfo.source.wavelength_min_unit = unit
391                elif tagname == 'wavelength_max' and self.parent_class == 'SASsource':
392                    self.current_datainfo.source.wavelength_max = data_point
393                    self.current_datainfo.source.wavelength_max_unit = unit
394                elif tagname == 'wavelength_spread' and self.parent_class == 'SASsource':
395                    self.current_datainfo.source.wavelength_spread = data_point
396                    self.current_datainfo.source.wavelength_spread_unit = unit
397                elif tagname == 'x' and self.parent_class == 'beam_size':
398                    self.current_datainfo.source.beam_size.x = data_point
399                    self.current_datainfo.source.beam_size_unit = unit
400                elif tagname == 'y' and self.parent_class == 'beam_size':
401                    self.current_datainfo.source.beam_size.y = data_point
402                    self.current_datainfo.source.beam_size_unit = unit
403                elif tagname == 'z' and self.parent_class == 'pixel_size':
404                    self.current_datainfo.source.data_point.z = data_point
405                    self.current_datainfo.source.beam_size_unit = unit
406                elif tagname == 'radiation' and self.parent_class == 'SASsource':
407                    self.current_datainfo.source.radiation = data_point
408                elif tagname == 'beam_shape' and self.parent_class == 'SASsource':
409                    self.current_datainfo.source.beam_shape = data_point
410
411                ## Everything else goes in meta_data
412                else:
413                    new_key = self._create_unique_key(self.current_datainfo.meta_data, tagname)
414                    self.current_datainfo.meta_data[new_key] = data_point
415
416            self.names.remove(tagname_original)
417            length = 0
418            if len(self.names) > 1:
419                length = len(self.names) - 1
420            self.parent_class = self.names[length]
421        if not self._is_call_local(frm):
422            self.add_data_set()
423            empty = None
424            if self.output[0].dx is not None:
425                self.output[0].dxl = np.empty(0)
426                self.output[0].dxw = np.empty(0)
427            else:
428                self.output[0].dx = np.empty(0)
429            return self.output[0], empty
430
431
432    def _is_call_local(self, frm=""):
433        """
434
435        :return:
436        """
437        if frm == "":
438            frm = inspect.stack()[1]
439        mod_name = frm[1].replace("\\", "/").replace(".pyc", "")
440        mod_name = mod_name.replace(".py", "")
441        mod = mod_name.split("sas/")
442        mod_name = mod[1]
443        if mod_name != "sascalc/dataloader/readers/cansas_reader":
444            return False
445        return True
446
447    def is_cansas(self, ext="xml"):
448        """
449        Checks to see if the xml file is a CanSAS file
450
451        :param ext: The file extension of the data file
452        """
453        if self.validate_xml():
454            name = "{http://www.w3.org/2001/XMLSchema-instance}schemaLocation"
455            value = self.xmlroot.get(name)
456            if CANSAS_NS.get(self.cansas_version).get("ns") == \
457                    value.rsplit(" ")[0]:
458                return True
459        if ext == "svs":
460            return True
461        raise RuntimeError
462
463    def load_file_and_schema(self, xml_file, schema_path=""):
464        """
465        Loads the file and associates a schema, if a schema is passed in or if one already exists
466
467        :param xml_file: The xml file path sent to Reader.read
468        :param schema_path: The path to a schema associated with the xml_file, or find one based on the file
469        """
470        base_name = xml_reader.__file__
471        base_name = base_name.replace("\\", "/")
472        base = base_name.split("/sas/")[0]
473
474        # Load in xml file and get the cansas version from the header
475        self.set_xml_file(xml_file)
476        self.cansas_version = self.xmlroot.get("version", "1.0")
477
478        # Generic values for the cansas file based on the version
479        self.cansas_defaults = CANSAS_NS.get(self.cansas_version, "1.0")
480        if schema_path == "":
481            schema_path = "{0}/sas/sascalc/dataloader/readers/schema/{1}".format \
482                (base, self.cansas_defaults.get("schema")).replace("\\", "/")
483
484        # Link a schema to the XML file.
485        self.set_schema(schema_path)
486
487    def add_data_set(self):
488        """
489        Adds the current_dataset to the list of outputs after preforming final processing on the data and then calls a
490        private method to generate a new data set.
491
492        :param key: NeXus group name for current tree level
493        """
494
495        if self.current_datainfo and self.current_dataset:
496            self._final_cleanup()
497        self.data = []
498        self.current_datainfo = DataInfo()
499
500    def _initialize_new_data_set(self, parent_list=None):
501        """
502        A private class method to generate a new 1D data object.
503        Outside methods should call add_data_set() to be sure any existing data is stored properly.
504
505        :param parent_list: List of names of parent elements
506        """
507
508        if parent_list is None:
509            parent_list = []
510        x = np.array(0)
511        y = np.array(0)
512        self.current_dataset = plottable_1D(x, y)
513
514    def add_intermediate(self):
515        """
516        This method stores any intermediate objects within the final data set after fully reading the set.
517
518        :param parent: The NXclass name for the h5py Group object that just finished being processed
519        """
520
521        if self.parent_class == 'SASprocess':
522            self.current_datainfo.process.append(self.process)
523            self.process = Process()
524        elif self.parent_class == 'SASdetector':
525            self.current_datainfo.detector.append(self.detector)
526            self.detector = Detector()
527        elif self.parent_class == 'SAStransmission_spectrum':
528            self.current_datainfo.trans_spectrum.append(self.transspectrum)
529            self.transspectrum = TransmissionSpectrum()
530        elif self.parent_class == 'SAScollimation':
531            self.current_datainfo.collimation.append(self.collimation)
532            self.collimation = Collimation()
533        elif self.parent_class == 'SASaperture':
534            self.collimation.aperture.append(self.aperture)
535            self.aperture = Aperture()
536        elif self.parent_class == 'SASdata':
537            self._check_for_empty_resolution()
538            self.data.append(self.current_dataset)
539
540    def _final_cleanup(self):
541        """
542        Final cleanup of the Data1D object to be sure it has all the
543        appropriate information needed for perspectives
544        """
545
546        ## Append errors to dataset and reset class errors
547        self.current_datainfo.errors = set()
548        for error in self.errors:
549            self.current_datainfo.errors.add(error)
550        self.errors.clear()
551
552        ## Combine all plottables with datainfo and append each to output
553        ## Type cast data arrays to float64 and find min/max as appropriate
554        for dataset in self.data:
555            if dataset.x is not None:
556                dataset.x = np.delete(dataset.x, [0])
557                dataset.x = dataset.x.astype(np.float64)
558                dataset.xmin = np.min(dataset.x)
559                dataset.xmax = np.max(dataset.x)
560            if dataset.y is not None:
561                dataset.y = np.delete(dataset.y, [0])
562                dataset.y = dataset.y.astype(np.float64)
563                dataset.ymin = np.min(dataset.y)
564                dataset.ymax = np.max(dataset.y)
565            if dataset.dx is not None:
566                dataset.dx = np.delete(dataset.dx, [0])
567                dataset.dx = dataset.dx.astype(np.float64)
568            if dataset.dxl is not None:
569                dataset.dxl = np.delete(dataset.dxl, [0])
570                dataset.dxl = dataset.dxl.astype(np.float64)
571            if dataset.dxw is not None:
572                dataset.dxw = np.delete(dataset.dxw, [0])
573                dataset.dxw = dataset.dxw.astype(np.float64)
574            if dataset.dy is not None:
575                dataset.dy = np.delete(dataset.dy, [0])
576                dataset.dy = dataset.dy.astype(np.float64)
577            np.trim_zeros(dataset.x)
578            np.trim_zeros(dataset.y)
579            np.trim_zeros(dataset.dy)
580            final_dataset = combine_data(dataset, self.current_datainfo)
581            self.output.append(final_dataset)
582
583    def _create_unique_key(self, dictionary, name, numb=0):
584        """
585        Create a unique key value for any dictionary to prevent overwriting
586        Recurse until a unique key value is found.
587
588        :param dictionary: A dictionary with any number of entries
589        :param name: The index of the item to be added to dictionary
590        :param numb: The number to be appended to the name, starts at 0
591        """
592        if dictionary.get(name) is not None:
593            numb += 1
594            name = name.split("_")[0]
595            name += "_{0}".format(numb)
596            name = self._create_unique_key(dictionary, name, numb)
597        return name
598
599    def _get_node_value(self, node, tagname):
600        """
601        Get the value of a node and any applicable units
602
603        :param node: The XML node to get the value of
604        :param tagname: The tagname of the node
605        """
606        #Get the text from the node and convert all whitespace to spaces
607        units = ''
608        node_value = node.text
609        if node_value is not None:
610            node_value = ' '.join(node_value.split())
611        else:
612            node_value = ""
613
614        # If the value is a float, compile with units.
615        if self.ns_list.ns_datatype == "float":
616            # If an empty value is given, set as zero.
617            if node_value is None or node_value.isspace() \
618                                    or node_value.lower() == "nan":
619                node_value = "0.0"
620            #Convert the value to the base units
621            node_value, units = self._unit_conversion(node, tagname, node_value)
622
623        # If the value is a timestamp, convert to a datetime object
624        elif self.ns_list.ns_datatype == "timestamp":
625            if node_value is None or node_value.isspace():
626                pass
627            else:
628                try:
629                    node_value = \
630                        datetime.datetime.fromtimestamp(node_value)
631                except ValueError:
632                    node_value = None
633        return node_value, units
634
635    def _unit_conversion(self, node, tagname, node_value):
636        """
637        A unit converter method used to convert the data included in the file
638        to the default units listed in data_info
639
640        :param node: XML node
641        :param tagname: name of the node
642        :param node_value: The value of the current dom node
643        """
644        attr = node.attrib
645        value_unit = ''
646        err_msg = None
647        default_unit = None
648        if 'unit' in attr and attr.get('unit') is not None and not self.ns_list.ns_optional:
649            try:
650                local_unit = attr['unit']
651                if not isinstance(node_value, float):
652                    node_value = float(node_value)
653                unitname = self.ns_list.current_level.get("unit", "")
654                if "SASdetector" in self.names:
655                    save_in = "detector"
656                elif "aperture" in self.names:
657                    save_in = "aperture"
658                elif "SAScollimation" in self.names:
659                    save_in = "collimation"
660                elif "SAStransmission_spectrum" in self.names:
661                    save_in = "transspectrum"
662                elif "SASdata" in self.names:
663                    x = np.zeros(1)
664                    y = np.zeros(1)
665                    self.current_data1d = Data1D(x, y)
666                    save_in = "current_data1d"
667                elif "SASsource" in self.names:
668                    save_in = "current_datainfo.source"
669                elif "SASsample" in self.names:
670                    save_in = "current_datainfo.sample"
671                elif "SASprocess" in self.names:
672                    save_in = "process"
673                else:
674                    save_in = "current_datainfo"
675                exec "default_unit = self.{0}.{1}".format(save_in, unitname)
676                if local_unit and default_unit and local_unit.lower() != default_unit.lower() \
677                        and local_unit.lower() != "none":
678                    if HAS_CONVERTER == True:
679                        ## Check local units - bad units raise KeyError
680                        data_conv_q = Converter(local_unit)
681                        value_unit = default_unit
682                        node_value = data_conv_q(node_value, units=default_unit)
683                    else:
684                        value_unit = local_unit
685                        err_msg = "Unit converter is not available.\n"
686                else:
687                    value_unit = local_unit
688            except KeyError:
689                err_msg = "CanSAS reader: unexpected "
690                err_msg += "\"{0}\" unit [{1}]; "
691                err_msg = err_msg.format(tagname, local_unit)
692                err_msg += "expecting [{0}]".format(default_unit)
693                value_unit = local_unit
694            except:
695                err_msg = "CanSAS reader: unknown error converting "
696                err_msg += "\"{0}\" unit [{1}]"
697                err_msg = err_msg.format(tagname, local_unit)
698                value_unit = local_unit
699        elif 'unit' in attr:
700            value_unit = attr['unit']
701        if err_msg:
702            self.errors.add(err_msg)
703        return node_value, value_unit
704
705    def _check_for_empty_data(self):
706        """
707        Creates an empty data set if no data is passed to the reader
708
709        :param data1d: presumably a Data1D object
710        """
711        if self.current_dataset == None:
712            x_vals = np.empty(0)
713            y_vals = np.empty(0)
714            dx_vals = np.empty(0)
715            dy_vals = np.empty(0)
716            dxl = np.empty(0)
717            dxw = np.empty(0)
718            self.current_dataset = plottable_1D(x_vals, y_vals, dx_vals, dy_vals)
719            self.current_dataset.dxl = dxl
720            self.current_dataset.dxw = dxw
721
722    def _check_for_empty_resolution(self):
723        """
724        A method to check all resolution data sets are the same size as I and Q
725        """
726        dql_exists = False
727        dqw_exists = False
728        dq_exists = False
729        di_exists = False
730        if self.current_dataset.dxl is not None:
731            dql_exists = True
732        if self.current_dataset.dxw is not None:
733            dqw_exists = True
734        if self.current_dataset.dx is not None:
735            dq_exists = True
736        if self.current_dataset.dy is not None:
737            di_exists = True
738        if dqw_exists and not dql_exists:
739            array_size = self.current_dataset.dxw.size - 1
740            self.current_dataset.dxl = np.append(self.current_dataset.dxl, np.zeros([array_size]))
741        elif dql_exists and not dqw_exists:
742            array_size = self.current_dataset.dxl.size - 1
743            self.current_dataset.dxw = np.append(self.current_dataset.dxw, np.zeros([array_size]))
744        elif not dql_exists and not dqw_exists and not dq_exists:
745            array_size = self.current_dataset.x.size - 1
746            self.current_dataset.dx = np.append(self.current_dataset.dx, np.zeros([array_size]))
747        if not di_exists:
748            array_size = self.current_dataset.y.size - 1
749            self.current_dataset.dy = np.append(self.current_dataset.dy, np.zeros([array_size]))
750
751
752    ####### All methods below are for writing CanSAS XML files #######
753
754
755    def write(self, filename, datainfo):
756        """
757        Write the content of a Data1D as a CanSAS XML file
758
759        :param filename: name of the file to write
760        :param datainfo: Data1D object
761        """
762        # Create XML document
763        doc, _ = self._to_xml_doc(datainfo)
764        # Write the file
765        file_ref = open(filename, 'w')
766        if self.encoding == None:
767            self.encoding = "UTF-8"
768        doc.write(file_ref, encoding=self.encoding,
769                  pretty_print=True, xml_declaration=True)
770        file_ref.close()
771
772    def _to_xml_doc(self, datainfo):
773        """
774        Create an XML document to contain the content of a Data1D
775
776        :param datainfo: Data1D object
777        """
778        if not issubclass(datainfo.__class__, Data1D):
779            raise RuntimeError, "The cansas writer expects a Data1D instance"
780
781        # Get PIs and create root element
782        pi_string = self._get_pi_string()
783        # Define namespaces and create SASroot object
784        main_node = self._create_main_node()
785        # Create ElementTree, append SASroot and apply processing instructions
786        base_string = pi_string + self.to_string(main_node)
787        base_element = self.create_element_from_string(base_string)
788        doc = self.create_tree(base_element)
789        # Create SASentry Element
790        entry_node = self.create_element("SASentry")
791        root = doc.getroot()
792        root.append(entry_node)
793
794        # Add Title to SASentry
795        self.write_node(entry_node, "Title", datainfo.title)
796        # Add Run to SASentry
797        self._write_run_names(datainfo, entry_node)
798        # Add Data info to SASEntry
799        self._write_data(datainfo, entry_node)
800        # Transmission Spectrum Info
801        self._write_trans_spectrum(datainfo, entry_node)
802        # Sample info
803        self._write_sample_info(datainfo, entry_node)
804        # Instrument info
805        instr = self._write_instrument(datainfo, entry_node)
806        #   Source
807        self._write_source(datainfo, instr)
808        #   Collimation
809        self._write_collimation(datainfo, instr)
810        #   Detectors
811        self._write_detectors(datainfo, instr)
812        # Processes info
813        self._write_process_notes(datainfo, entry_node)
814        # Note info
815        self._write_notes(datainfo, entry_node)
816        # Return the document, and the SASentry node associated with
817        #      the data we just wrote
818        # If the calling function was not the cansas reader, return a minidom
819        #      object rather than an lxml object.
820        frm = inspect.stack()[1]
821        doc, entry_node = self._check_origin(entry_node, doc, frm)
822        return doc, entry_node
823
824    def write_node(self, parent, name, value, attr=None):
825        """
826        :param doc: document DOM
827        :param parent: parent node
828        :param name: tag of the element
829        :param value: value of the child text node
830        :param attr: attribute dictionary
831
832        :return: True if something was appended, otherwise False
833        """
834        if value is not None:
835            parent = self.ebuilder(parent, name, value, attr)
836            return True
837        return False
838
839    def _get_pi_string(self):
840        """
841        Creates the processing instructions header for writing to file
842        """
843        pis = self.return_processing_instructions()
844        if len(pis) > 0:
845            pi_tree = self.create_tree(pis[0])
846            i = 1
847            for i in range(1, len(pis) - 1):
848                pi_tree = self.append(pis[i], pi_tree)
849            pi_string = self.to_string(pi_tree)
850        else:
851            pi_string = ""
852        return pi_string
853
854    def _create_main_node(self):
855        """
856        Creates the primary xml header used when writing to file
857        """
858        xsi = "http://www.w3.org/2001/XMLSchema-instance"
859        version = self.cansas_version
860        n_s = CANSAS_NS.get(version).get("ns")
861        if version == "1.1":
862            url = "http://www.cansas.org/formats/1.1/"
863        else:
864            url = "http://svn.smallangles.net/svn/canSAS/1dwg/trunk/"
865        schema_location = "{0} {1}cansas1d.xsd".format(n_s, url)
866        attrib = {"{" + xsi + "}schemaLocation" : schema_location,
867                  "version" : version}
868        nsmap = {'xsi' : xsi, None: n_s}
869
870        main_node = self.create_element("{" + n_s + "}SASroot",
871                                        attrib=attrib, nsmap=nsmap)
872        return main_node
873
874    def _write_run_names(self, datainfo, entry_node):
875        """
876        Writes the run names to the XML file
877
878        :param datainfo: The Data1D object the information is coming from
879        :param entry_node: lxml node ElementTree object to be appended to
880        """
881        if datainfo.run == None or datainfo.run == []:
882            datainfo.run.append(RUN_NAME_DEFAULT)
883            datainfo.run_name[RUN_NAME_DEFAULT] = RUN_NAME_DEFAULT
884        for item in datainfo.run:
885            runname = {}
886            if item in datainfo.run_name and \
887            len(str(datainfo.run_name[item])) > 1:
888                runname = {'name': datainfo.run_name[item]}
889            self.write_node(entry_node, "Run", item, runname)
890
891    def _write_data(self, datainfo, entry_node):
892        """
893        Writes the I and Q data to the XML file
894
895        :param datainfo: The Data1D object the information is coming from
896        :param entry_node: lxml node ElementTree object to be appended to
897        """
898        node = self.create_element("SASdata")
899        self.append(node, entry_node)
900
901        for i in range(len(datainfo.x)):
902            point = self.create_element("Idata")
903            node.append(point)
904            self.write_node(point, "Q", datainfo.x[i],
905                            {'unit': datainfo.x_unit})
906            if len(datainfo.y) >= i:
907                self.write_node(point, "I", datainfo.y[i],
908                                {'unit': datainfo.y_unit})
909            if datainfo.dy != None and len(datainfo.dy) > i:
910                self.write_node(point, "Idev", datainfo.dy[i],
911                                {'unit': datainfo.y_unit})
912            if datainfo.dx != None and len(datainfo.dx) > i:
913                self.write_node(point, "Qdev", datainfo.dx[i],
914                                {'unit': datainfo.x_unit})
915            if datainfo.dxw != None and len(datainfo.dxw) > i:
916                self.write_node(point, "dQw", datainfo.dxw[i],
917                                {'unit': datainfo.x_unit})
918            if datainfo.dxl != None and len(datainfo.dxl) > i:
919                self.write_node(point, "dQl", datainfo.dxl[i],
920                                {'unit': datainfo.x_unit})
921
922    def _write_trans_spectrum(self, datainfo, entry_node):
923        """
924        Writes the transmission spectrum data to the XML file
925
926        :param datainfo: The Data1D object the information is coming from
927        :param entry_node: lxml node ElementTree object to be appended to
928        """
929        for i in range(len(datainfo.trans_spectrum)):
930            spectrum = datainfo.trans_spectrum[i]
931            node = self.create_element("SAStransmission_spectrum",
932                                       {"name" : spectrum.name})
933            self.append(node, entry_node)
934            if isinstance(spectrum.timestamp, datetime.datetime):
935                node.setAttribute("timestamp", spectrum.timestamp)
936            for i in range(len(spectrum.wavelength)):
937                point = self.create_element("Tdata")
938                node.append(point)
939                self.write_node(point, "Lambda", spectrum.wavelength[i],
940                                {'unit': spectrum.wavelength_unit})
941                self.write_node(point, "T", spectrum.transmission[i],
942                                {'unit': spectrum.transmission_unit})
943                if spectrum.transmission_deviation != None \
944                and len(spectrum.transmission_deviation) >= i:
945                    self.write_node(point, "Tdev",
946                                    spectrum.transmission_deviation[i],
947                                    {'unit':
948                                     spectrum.transmission_deviation_unit})
949
950    def _write_sample_info(self, datainfo, entry_node):
951        """
952        Writes the sample information to the XML file
953
954        :param datainfo: The Data1D object the information is coming from
955        :param entry_node: lxml node ElementTree object to be appended to
956        """
957        sample = self.create_element("SASsample")
958        if datainfo.sample.name is not None:
959            self.write_attribute(sample, "name",
960                                 str(datainfo.sample.name))
961        self.append(sample, entry_node)
962        self.write_node(sample, "ID", str(datainfo.sample.ID))
963        self.write_node(sample, "thickness", datainfo.sample.thickness,
964                        {"unit": datainfo.sample.thickness_unit})
965        self.write_node(sample, "transmission", datainfo.sample.transmission)
966        self.write_node(sample, "temperature", datainfo.sample.temperature,
967                        {"unit": datainfo.sample.temperature_unit})
968
969        pos = self.create_element("position")
970        written = self.write_node(pos,
971                                  "x",
972                                  datainfo.sample.position.x,
973                                  {"unit": datainfo.sample.position_unit})
974        written = written | self.write_node( \
975            pos, "y", datainfo.sample.position.y,
976            {"unit": datainfo.sample.position_unit})
977        written = written | self.write_node( \
978            pos, "z", datainfo.sample.position.z,
979            {"unit": datainfo.sample.position_unit})
980        if written == True:
981            self.append(pos, sample)
982
983        ori = self.create_element("orientation")
984        written = self.write_node(ori, "roll",
985                                  datainfo.sample.orientation.x,
986                                  {"unit": datainfo.sample.orientation_unit})
987        written = written | self.write_node( \
988            ori, "pitch", datainfo.sample.orientation.y,
989            {"unit": datainfo.sample.orientation_unit})
990        written = written | self.write_node( \
991            ori, "yaw", datainfo.sample.orientation.z,
992            {"unit": datainfo.sample.orientation_unit})
993        if written == True:
994            self.append(ori, sample)
995
996        for item in datainfo.sample.details:
997            self.write_node(sample, "details", item)
998
999    def _write_instrument(self, datainfo, entry_node):
1000        """
1001        Writes the instrumental information to the XML file
1002
1003        :param datainfo: The Data1D object the information is coming from
1004        :param entry_node: lxml node ElementTree object to be appended to
1005        """
1006        instr = self.create_element("SASinstrument")
1007        self.append(instr, entry_node)
1008        self.write_node(instr, "name", datainfo.instrument)
1009        return instr
1010
1011    def _write_source(self, datainfo, instr):
1012        """
1013        Writes the source information to the XML file
1014
1015        :param datainfo: The Data1D object the information is coming from
1016        :param instr: instrument node  to be appended to
1017        """
1018        source = self.create_element("SASsource")
1019        if datainfo.source.name is not None:
1020            self.write_attribute(source, "name",
1021                                 str(datainfo.source.name))
1022        self.append(source, instr)
1023        if datainfo.source.radiation == None or datainfo.source.radiation == '':
1024            datainfo.source.radiation = "neutron"
1025        self.write_node(source, "radiation", datainfo.source.radiation)
1026
1027        size = self.create_element("beam_size")
1028        if datainfo.source.beam_size_name is not None:
1029            self.write_attribute(size, "name",
1030                                 str(datainfo.source.beam_size_name))
1031        written = self.write_node( \
1032            size, "x", datainfo.source.beam_size.x,
1033            {"unit": datainfo.source.beam_size_unit})
1034        written = written | self.write_node( \
1035            size, "y", datainfo.source.beam_size.y,
1036            {"unit": datainfo.source.beam_size_unit})
1037        written = written | self.write_node( \
1038            size, "z", datainfo.source.beam_size.z,
1039            {"unit": datainfo.source.beam_size_unit})
1040        if written == True:
1041            self.append(size, source)
1042
1043        self.write_node(source, "beam_shape", datainfo.source.beam_shape)
1044        self.write_node(source, "wavelength",
1045                        datainfo.source.wavelength,
1046                        {"unit": datainfo.source.wavelength_unit})
1047        self.write_node(source, "wavelength_min",
1048                        datainfo.source.wavelength_min,
1049                        {"unit": datainfo.source.wavelength_min_unit})
1050        self.write_node(source, "wavelength_max",
1051                        datainfo.source.wavelength_max,
1052                        {"unit": datainfo.source.wavelength_max_unit})
1053        self.write_node(source, "wavelength_spread",
1054                        datainfo.source.wavelength_spread,
1055                        {"unit": datainfo.source.wavelength_spread_unit})
1056
1057    def _write_collimation(self, datainfo, instr):
1058        """
1059        Writes the collimation information to the XML file
1060
1061        :param datainfo: The Data1D object the information is coming from
1062        :param instr: lxml node ElementTree object to be appended to
1063        """
1064        if datainfo.collimation == [] or datainfo.collimation == None:
1065            coll = Collimation()
1066            datainfo.collimation.append(coll)
1067        for item in datainfo.collimation:
1068            coll = self.create_element("SAScollimation")
1069            if item.name is not None:
1070                self.write_attribute(coll, "name", str(item.name))
1071            self.append(coll, instr)
1072
1073            self.write_node(coll, "length", item.length,
1074                            {"unit": item.length_unit})
1075
1076            for aperture in item.aperture:
1077                apert = self.create_element("aperture")
1078                if aperture.name is not None:
1079                    self.write_attribute(apert, "name", str(aperture.name))
1080                if aperture.type is not None:
1081                    self.write_attribute(apert, "type", str(aperture.type))
1082                self.append(apert, coll)
1083
1084                size = self.create_element("size")
1085                if aperture.size_name is not None:
1086                    self.write_attribute(size, "name",
1087                                         str(aperture.size_name))
1088                written = self.write_node(size, "x", aperture.size.x,
1089                                          {"unit": aperture.size_unit})
1090                written = written | self.write_node( \
1091                    size, "y", aperture.size.y,
1092                    {"unit": aperture.size_unit})
1093                written = written | self.write_node( \
1094                    size, "z", aperture.size.z,
1095                    {"unit": aperture.size_unit})
1096                if written == True:
1097                    self.append(size, apert)
1098
1099                self.write_node(apert, "distance", aperture.distance,
1100                                {"unit": aperture.distance_unit})
1101
1102    def _write_detectors(self, datainfo, instr):
1103        """
1104        Writes the detector information to the XML file
1105
1106        :param datainfo: The Data1D object the information is coming from
1107        :param inst: lxml instrument node to be appended to
1108        """
1109        if datainfo.detector == None or datainfo.detector == []:
1110            det = Detector()
1111            det.name = ""
1112            datainfo.detector.append(det)
1113
1114        for item in datainfo.detector:
1115            det = self.create_element("SASdetector")
1116            written = self.write_node(det, "name", item.name)
1117            written = written | self.write_node(det, "SDD", item.distance,
1118                                                {"unit": item.distance_unit})
1119            if written == True:
1120                self.append(det, instr)
1121
1122            off = self.create_element("offset")
1123            written = self.write_node(off, "x", item.offset.x,
1124                                      {"unit": item.offset_unit})
1125            written = written | self.write_node(off, "y", item.offset.y,
1126                                                {"unit": item.offset_unit})
1127            written = written | self.write_node(off, "z", item.offset.z,
1128                                                {"unit": item.offset_unit})
1129            if written == True:
1130                self.append(off, det)
1131
1132            ori = self.create_element("orientation")
1133            written = self.write_node(ori, "roll", item.orientation.x,
1134                                      {"unit": item.orientation_unit})
1135            written = written | self.write_node(ori, "pitch",
1136                                                item.orientation.y,
1137                                                {"unit": item.orientation_unit})
1138            written = written | self.write_node(ori, "yaw",
1139                                                item.orientation.z,
1140                                                {"unit": item.orientation_unit})
1141            if written == True:
1142                self.append(ori, det)
1143
1144            center = self.create_element("beam_center")
1145            written = self.write_node(center, "x", item.beam_center.x,
1146                                      {"unit": item.beam_center_unit})
1147            written = written | self.write_node(center, "y",
1148                                                item.beam_center.y,
1149                                                {"unit": item.beam_center_unit})
1150            written = written | self.write_node(center, "z",
1151                                                item.beam_center.z,
1152                                                {"unit": item.beam_center_unit})
1153            if written == True:
1154                self.append(center, det)
1155
1156            pix = self.create_element("pixel_size")
1157            written = self.write_node(pix, "x", item.pixel_size.x,
1158                                      {"unit": item.pixel_size_unit})
1159            written = written | self.write_node(pix, "y", item.pixel_size.y,
1160                                                {"unit": item.pixel_size_unit})
1161            written = written | self.write_node(pix, "z", item.pixel_size.z,
1162                                                {"unit": item.pixel_size_unit})
1163            written = written | self.write_node(det, "slit_length",
1164                                                item.slit_length,
1165                                                {"unit": item.slit_length_unit})
1166            if written == True:
1167                self.append(pix, det)
1168
1169    def _write_process_notes(self, datainfo, entry_node):
1170        """
1171        Writes the process notes to the XML file
1172
1173        :param datainfo: The Data1D object the information is coming from
1174        :param entry_node: lxml node ElementTree object to be appended to
1175
1176        """
1177        for item in datainfo.process:
1178            node = self.create_element("SASprocess")
1179            self.append(node, entry_node)
1180            self.write_node(node, "name", item.name)
1181            self.write_node(node, "date", item.date)
1182            self.write_node(node, "description", item.description)
1183            for term in item.term:
1184                if isinstance(term, list):
1185                    value = term['value']
1186                    del term['value']
1187                else:
1188                    value = term
1189                self.write_node(node, "term", value, term)
1190            for note in item.notes:
1191                self.write_node(node, "SASprocessnote", note)
1192            if len(item.notes) == 0:
1193                self.write_node(node, "SASprocessnote", "")
1194
1195    def _write_notes(self, datainfo, entry_node):
1196        """
1197        Writes the notes to the XML file and creates an empty note if none
1198        exist
1199
1200        :param datainfo: The Data1D object the information is coming from
1201        :param entry_node: lxml node ElementTree object to be appended to
1202
1203        """
1204        if len(datainfo.notes) == 0:
1205            node = self.create_element("SASnote")
1206            self.append(node, entry_node)
1207        else:
1208            for item in datainfo.notes:
1209                node = self.create_element("SASnote")
1210                self.write_text(node, item)
1211                self.append(node, entry_node)
1212
1213    def _check_origin(self, entry_node, doc, frm):
1214        """
1215        Return the document, and the SASentry node associated with
1216        the data we just wrote.
1217        If the calling function was not the cansas reader, return a minidom
1218        object rather than an lxml object.
1219
1220        :param entry_node: lxml node ElementTree object to be appended to
1221        :param doc: entire xml tree
1222        """
1223        if not frm:
1224            frm = inspect.stack()[1]
1225        mod_name = frm[1].replace("\\", "/").replace(".pyc", "")
1226        mod_name = mod_name.replace(".py", "")
1227        mod = mod_name.split("sas/")
1228        mod_name = mod[1]
1229        if mod_name != "sascalc/dataloader/readers/cansas_reader":
1230            string = self.to_string(doc, pretty_print=False)
1231            doc = parseString(string)
1232            node_name = entry_node.tag
1233            node_list = doc.getElementsByTagName(node_name)
1234            entry_node = node_list.item(0)
1235        return doc, entry_node
1236
1237    # DO NOT REMOVE - used in saving and loading panel states.
1238    def _store_float(self, location, node, variable, storage, optional=True):
1239        """
1240        Get the content of a xpath location and store
1241        the result. Check that the units are compatible
1242        with the destination. The value is expected to
1243        be a float.
1244
1245        The xpath location might or might not exist.
1246        If it does not exist, nothing is done
1247
1248        :param location: xpath location to fetch
1249        :param node: node to read the data from
1250        :param variable: name of the data member to store it in [string]
1251        :param storage: data object that has the 'variable' data member
1252        :param optional: if True, no exception will be raised
1253            if unit conversion can't be done
1254
1255        :raise ValueError: raised when the units are not recognized
1256        """
1257        entry = get_content(location, node)
1258        try:
1259            value = float(entry.text)
1260        except:
1261            value = None
1262
1263        if value is not None:
1264            # If the entry has units, check to see that they are
1265            # compatible with what we currently have in the data object
1266            units = entry.get('unit')
1267            if units is not None:
1268                toks = variable.split('.')
1269                local_unit = None
1270                exec "local_unit = storage.%s_unit" % toks[0]
1271                if local_unit != None and units.lower() != local_unit.lower():
1272                    if HAS_CONVERTER == True:
1273                        try:
1274                            conv = Converter(units)
1275                            exec "storage.%s = %g" % \
1276                                (variable, conv(value, units=local_unit))
1277                        except:
1278                            _, exc_value, _ = sys.exc_info()
1279                            err_mess = "CanSAS reader: could not convert"
1280                            err_mess += " %s unit [%s]; expecting [%s]\n  %s" \
1281                                % (variable, units, local_unit, exc_value)
1282                            self.errors.add(err_mess)
1283                            if optional:
1284                                logging.info(err_mess)
1285                            else:
1286                                raise ValueError, err_mess
1287                    else:
1288                        err_mess = "CanSAS reader: unrecognized %s unit [%s];"\
1289                        % (variable, units)
1290                        err_mess += " expecting [%s]" % local_unit
1291                        self.errors.add(err_mess)
1292                        if optional:
1293                            logging.info(err_mess)
1294                        else:
1295                            raise ValueError, err_mess
1296                else:
1297                    exec "storage.%s = value" % variable
1298            else:
1299                exec "storage.%s = value" % variable
1300
1301    # DO NOT REMOVE - used in saving and loading panel states.
1302    def _store_content(self, location, node, variable, storage):
1303        """
1304        Get the content of a xpath location and store
1305        the result. The value is treated as a string.
1306
1307        The xpath location might or might not exist.
1308        If it does not exist, nothing is done
1309
1310        :param location: xpath location to fetch
1311        :param node: node to read the data from
1312        :param variable: name of the data member to store it in [string]
1313        :param storage: data object that has the 'variable' data member
1314
1315        :return: return a list of errors
1316        """
1317        entry = get_content(location, node)
1318        if entry is not None and entry.text is not None:
1319            exec "storage.%s = entry.text.strip()" % variable
1320
1321
1322# DO NOT REMOVE Called by outside packages:
1323#    sas.sasgui.perspectives.invariant.invariant_state
1324#    sas.sasgui.perspectives.fitting.pagestate
1325def get_content(location, node):
1326    """
1327    Get the first instance of the content of a xpath location.
1328
1329    :param location: xpath location
1330    :param node: node to start at
1331
1332    :return: Element, or None
1333    """
1334    nodes = node.xpath(location,
1335                       namespaces={'ns': CANSAS_NS.get("1.0").get("ns")})
1336    if len(nodes) > 0:
1337        return nodes[0]
1338    else:
1339        return None
1340
1341# DO NOT REMOVE Called by outside packages:
1342#    sas.sasgui.perspectives.fitting.pagestate
1343def write_node(doc, parent, name, value, attr=None):
1344    """
1345    :param doc: document DOM
1346    :param parent: parent node
1347    :param name: tag of the element
1348    :param value: value of the child text node
1349    :param attr: attribute dictionary
1350
1351    :return: True if something was appended, otherwise False
1352    """
1353    if attr is None:
1354        attr = {}
1355    if value is not None:
1356        node = doc.createElement(name)
1357        node.appendChild(doc.createTextNode(str(value)))
1358        for item in attr:
1359            node.setAttribute(item, attr[item])
1360        parent.appendChild(node)
1361        return True
1362    return False
Note: See TracBrowser for help on using the repository browser.