source: sasview/installers/setup_exe.py @ 92df9cbd

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalcmagnetic_scattrelease-4.2.2ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload
Last change on this file since 92df9cbd was 92df9cbd, checked in by Paul Kienzle <pkienzle@…>, 3 years ago

bundler resources by directory

  • Property mode set to 100644
File size: 12.6 KB
Line 
1#!/usr/bin/env python
2
3#
4# The setup to create a Windows executable.
5# Inno Setup can then be used with the installer.iss file
6# in the top source directory to create an installer.
7#
8# Setuptools clashes with py2exe 0.6.8 (and probably later too).
9# For that reason, most of the code needs to have direct imports
10# that are not going through pkg_resources.
11#
12# Attention should be paid to dynamic imports. Data files can
13# be added to the distribution directory for that purpose.
14# See for example the 'images' directory below.
15from __future__ import print_function
16
17import os
18import sys
19from glob import glob
20import warnings
21import shutil
22
23from distutils.util import get_platform
24from distutils.core import setup
25from distutils.filelist import findall
26from distutils.sysconfig import get_python_lib
27
28#from idlelib.PyShell import warning_stream
29
30# Need the installer dir on the python path to find helper modules
31installer_dir = os.path.abspath(os.path.dirname(__file__))
32if installer_dir != os.path.abspath(os.getcwd()):
33    raise RuntimeError("Must run setup_exe from the installers directory")
34sys.path.append(installer_dir)
35
36# Need the installer dir on the python path to find helper modules
37if os.path.abspath(os.path.dirname(__file__)) != os.path.abspath(os.getcwd()):
38    raise RuntimeError("Must run setup_exe from the installers directory")
39sys.path.append(installer_dir)
40
41# put the build directory at the front of the path
42root = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
43platform = '%s-%s'%(get_platform(), sys.version[:3])
44doc_path = os.path.join(root, 'build', 'lib.'+platform, 'doc')
45build_path = os.path.join(root, 'sasview-install', 'Lib', 'site-packages')
46sys.path.insert(0, build_path)
47
48from sas.sasview import local_config
49from installer_generator import generate_installer
50
51import matplotlib
52try:
53    import tinycc
54except ImportError:
55    warnings.warn("TinyCC package is not available and will not be included")
56    tinycc = None
57
58if len(sys.argv) == 1:
59    sys.argv.append('py2exe')
60
61# When using the SasView build script, we need to be able to pass
62# an extra path to be added to the python path. The extra arguments
63# should be removed from the list so that the setup processing doesn't
64# fail.
65try:
66    if sys.argv.count('--extrapath'):
67        path_flag_idx = sys.argv.index('--extrapath')
68        extra_path = sys.argv[path_flag_idx+1]
69        sys.path.insert(0, extra_path)
70        del sys.argv[path_flag_idx+1]
71        sys.argv.remove('--extrapath')
72except Exception:
73    print("Error processing extra python path needed to build SasView\n  %s" %
74          sys.exc_value)
75
76
77# Solution taken from here: http://www.py2exe.org/index.cgi/win32com.shell
78# ModuleFinder can't handle runtime changes to __path__, but win32com uses them
79win32_folder = "win32comext"
80try:
81    # py2exe 0.6.4 introduced a replacement modulefinder.
82    # This means we have to add package paths there, not to the built-in
83    # one.  If this new modulefinder gets integrated into Python, then
84    # we might be able to revert this some day.
85    # if this doesn't work, try import modulefinder
86    try:
87        import py2exe.mf as modulefinder
88    except ImportError:
89        import modulefinder
90    import win32com
91    for p in win32com.__path__[1:]:
92        modulefinder.AddPackagePath(win32_folder, p)
93    for extra in ["win32com.shell", "win32com.adsi", "win32com.axcontrol",
94                  "win32com.axscript", "win32com.bits", "win32com.ifilter",
95                  "win32com.internet", "win32com.mapi", "win32com.propsys",
96                  "win32com.taskscheduler"]:
97        __import__(extra)
98        m = sys.modules[extra]
99        for p in m.__path__[1:]:
100            modulefinder.AddPackagePath(extra, p)
101
102except ImportError:
103    # no build path setup, no worries.
104    pass
105
106# Remove the build folder
107shutil.rmtree("build", ignore_errors=True)
108# do the same for dist folder
109shutil.rmtree("dist", ignore_errors=True)
110
111is_64bits = sys.maxsize > 2**32
112arch = "amd64" if is_64bits else "x86"
113manifest = """
114    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
115    <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
116      <assemblyIdentity
117        version="5.0.0.0"
118        processorArchitecture="%(arch)s"
119        name="SasView"
120        type="win32">
121      </assemblyIdentity>
122      <description>SasView</description>
123      <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3">
124        <security>
125          <requestedPrivileges>
126            <requestedExecutionLevel
127              level="asInvoker"
128              uiAccess="false">
129            </requestedExecutionLevel>
130          </requestedPrivileges>
131        </security>
132      </trustInfo>
133      <dependency>
134        <dependentAssembly>
135          <assemblyIdentity
136            type="win32"
137            name="Microsoft.VC90.CRT"
138            version="9.0.21022.8"
139            processorArchitecture="%(arch)s"
140            publicKeyToken="1fc8b3b9a1e18e3b">
141          </assemblyIdentity>
142        </dependentAssembly>
143      </dependency>
144      <dependency>
145        <dependentAssembly>
146          <assemblyIdentity
147            type="win32"
148            name="Microsoft.Windows.Common-Controls"
149            version="6.0.0.0"
150            processorArchitecture="%(arch)s"
151            publicKeyToken="6595b64144ccf1df"
152            language="*">
153          </assemblyIdentity>
154        </dependentAssembly>
155      </dependency>
156    </assembly>
157    """%{'arch': arch}
158
159class Target:
160    def __init__(self, **kw):
161        self.__dict__.update(kw)
162        # for the versioninfo resources
163        self.version = local_config.__version__
164        self.company_name = "SasView.org"
165        self.copyright = "copyright 2009 - 2016"
166        self.name = "SasView"
167
168data_files = []
169
170if tinycc:
171    data_files += tinycc.data_files()
172
173# Include data for supporting packages
174import periodictable
175data_files += periodictable.data_files()
176
177#
178# Adapted from http://www.py2exe.org/index.cgi/MatPlotLib
179# to use the MatPlotLib.
180#
181mpl_dir = matplotlib.get_data_path()
182for dirpath, dirnames, filenames in os.walk(mpl_dir):
183    target_dir = os.path.join("mpl-data", os.path.relpath(dirpath, mpl_dir))
184    source_files = [os.path.join(dirpath, f) for f in filenames]
185    data_files.append((target_dir, source_files))
186
187import sasmodels
188data_files += sasmodels.data_files()
189
190# precompile sas models into the sasview build path; doesn't matter too much
191# where it is so long as it is a place that will get cleaned up afterwards.
192import sasmodels.core
193dll_path = os.path.join(build_path, 'compiled_models')
194compiled_dlls = sasmodels.core.precompile_dlls(dll_path, dtype='double')
195
196# include the compiled models as data; coordinate the target path for the
197# data with installer_generator.py
198data_files.append(('compiled_models', compiled_dlls))
199
200# Data files for the different perspectives
201from sas.sasgui.perspectives import fitting
202data_files += fitting.data_files()
203
204from sas.sasgui.perspectives import calculator
205data_files += calculator.data_files()
206
207from sas.sasgui.perspectives import invariant
208data_files += invariant.data_files()
209
210from sas.sasgui import guiframe
211data_files += guiframe.data_files()
212
213# Copy the config files
214sasview_path = os.path.join('..', 'src', 'sas', 'sasview')
215data_files.append(('.', [os.path.join(sasview_path, 'custom_config.py')]))
216data_files.append(('config', [os.path.join(sasview_path, 'custom_config.py')]))
217data_files.append(('.', [os.path.join(sasview_path, 'local_config.py')]))
218
219# Copy the logging config
220sas_path = os.path.join('..', 'src', 'sas')
221data_files.append(('.', [os.path.join(sas_path, 'logging.ini')]))
222
223if os.path.isfile("BUILD_NUMBER"):
224    data_files.append(('.', ["BUILD_NUMBER"]))
225
226# Copying the images directory to the distribution directory.
227data_files.append(("images", findall(local_config.icon_path)))
228
229# Copying the HTML help docs
230data_files.append(("media", findall(local_config.media_path)))
231
232# Copying the sample data user data
233test_dir = local_config.test_path
234for dirpath, dirnames, filenames in os.walk(test_dir):
235    target_dir = os.path.join("test", os.path.relpath(dirpath, test_dir))
236    source_files = [os.path.join(dirpath, f) for f in filenames]
237    data_files.append((target_dir, source_files))
238
239# See if the documentation has been built, and if so include it.
240if os.path.exists(doc_path):
241    for dirpath, dirnames, filenames in os.walk(doc_path):
242        target_dir = os.path.join("doc", os.path.relpath(dirpath, doc_path))
243        source_files = [os.path.join(dirpath, f) for f in filenames]
244        data_files.append((target_dir, source_files))
245else:
246    raise Exception("You must first build the documentation before creating an installer.")
247
248# Copying opencl include files
249opencl_source = os.path.join(get_python_lib(), "pyopencl", "cl")
250opencl_target = os.path.join("includes", "pyopencl")
251data_files.append((opencl_target, findall(opencl_source)))
252
253# Numerical libraries
254python_root = os.path.dirname(os.path.abspath(sys.executable))
255def dll_check(dll_path, dlls):
256    dll_includes = [os.path.join(dll_path, dll+'.dll') for dll in dlls]
257    return [dll for dll in dll_includes if os.path.exists(dll)]
258
259# Check for ATLAS
260numpy_path = os.path.join(python_root, 'lib', 'site-packages', 'numpy', 'core')
261atlas_dlls = dll_check(numpy_path, ['numpy-atlas'])
262
263# Check for MKL
264mkl_path = os.path.join(python_root, 'Library', 'bin')
265mkl_dlls = dll_check(mkl_path, ['mkl_core', 'mkl_def', 'libiomp5md'])
266
267if atlas_dlls:
268    data_files.append(('.', atlas_dlls))
269elif mkl_dlls:
270    data_files.append(('.', mkl_dlls))
271
272if is_64bits:
273    msvcrtdll = glob(r"C:\Program Files\Microsoft Visual Studio 9.0\VC\redist\x86\Microsoft.VC90.CRT\*.*")
274else:
275    msvcrtdll = glob(r"C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\redist\x86\Microsoft.VC90.CRT\*.*")
276if msvcrtdll:
277    # install the MSVC 9 runtime dll's into the application folder
278    data_files.append(("Microsoft.VC90.CRT", msvcrtdll))
279
280# NOTE:
281#  need an empty __init__.py in site-packages/numpy/distutils/tests and site-packages/mpl_toolkits
282
283# packages
284#
285packages = [
286    'matplotlib', 'scipy', 'encodings', 'comtypes', 'h5py',
287    'win32com', 'xhtml2pdf', 'bumps', 'sasmodels', 'sas',
288    ]
289packages.extend([
290    'reportlab',
291    'reportlab.graphics.charts',
292    'reportlab.graphics.samples',
293    'reportlab.graphics.widgets',
294    'reportlab.graphics.barcode',
295    'reportlab.graphics',
296    'reportlab.lib',
297    'reportlab.pdfbase',
298    'reportlab.pdfgen',
299    'reportlab.platypus',
300    ])
301packages.append('periodictable.core') # not found automatically
302
303# For the interactive interpreter SasViewCom make sure ipython is available
304#packages.extend(['IPython', 'pyreadline', 'pyreadline.unicode_helper'])
305
306# individual models
307includes = ['site', 'lxml._elementpath', 'lxml.etree']
308
309if tinycc:
310    packages.append('tinycc')
311
312# Exclude packages that are not needed but are often found on build systems
313excludes = ['Tkinter', 'PyQt4', '_tkagg', 'sip', 'pytz', 'sympy']
314
315dll_excludes = [
316    # Various matplotlib backends we are not using
317    'libgdk_pixbuf-2.0-0.dll', 'libgobject-2.0-0.dll', 'libgdk-win32-2.0-0.dll',
318    'tcl84.dll', 'tk84.dll', 'QtGui4.dll', 'QtCore4.dll',
319    # numpy 1.8 openmp bindings (still seems to use all the cores without them)
320    # ... but we seem to need them when building from anaconda, so don't exclude ...
321    #'libiomp5md.dll', 'libifcoremd.dll', 'libmmd.dll', 'svml_dispmd.dll','libifportMD.dll',
322    'numpy-atlas.dll',
323    # microsoft C runtime (not allowed to ship with the app; need to ship vcredist
324    'msvcp90.dll',
325    # 32-bit windows console piping
326    'w9xpopen.exe',
327    # accidental links to msys/cygwin binaries; shouldn't be needed
328    'cygwin1.dll',
329    # no need to distribute OpenCL.dll - users should have their own copy
330    'OpenCL.dll'
331    ]
332
333target_wx_client = Target(
334    description='SasView',
335    script='sasview_gui.py',
336    icon_resources=[(1, local_config.SetupIconFile_win)],
337    other_resources=[(24, 1, manifest)],
338    dest_base="SasView"
339)
340
341target_console_client = Target(
342    description='SasView console',
343    script='sasview_console.py',
344    icon_resources=[(1, local_config.SetupIconFile_win)],
345    other_resources=[(24, 1, manifest)],
346    dest_base="SasViewCom"
347)
348
349#bundle_option = 3 if is_64bits else 2
350bundle_option = 3
351generate_installer()
352#initialize category stuff
353#from sas.sasgui.guiframe.CategoryInstaller import CategoryInstaller
354#CategoryInstaller.check_install(s)
355
356#import pprint; pprint.pprint(data_files); sys.exit()
357
358import py2exe
359setup(
360    windows=[target_wx_client],
361    console=[target_console_client],
362    options={
363        'py2exe': {
364            'dll_excludes': dll_excludes,
365            'packages': packages,
366            'includes': includes,
367            'excludes': excludes,
368            "compressed": 1,
369            "optimize": 0,
370            "bundle_files": bundle_option,
371            },
372    },
373    data_files=data_files,
374)
Note: See TracBrowser for help on using the repository browser.