SectorSlicer.py @ 37f487e

ESS_GUIESS_GUI_DocsESS_GUI_batch_fittingESS_GUI_bumps_abstractionESS_GUI_iss1116ESS_GUI_iss879ESS_GUI_iss959ESS_GUI_openclESS_GUI_orderingESS_GUI_sync_sascalccostrafo411magnetic_scattrelease-4.1.1release-4.1.2release-4.2.2release_4.0.1ticket-1009ticket-1094-headlessticket-1242-2d-resolutionticket-1243ticket-1249ticket885unittest-saveload

Last change on this file since 37f487e was 7b73518, checked in by Jae Cho <jhjcho@…>, 16 years ago
added comments for delta
Property mode set to `100644`
File size: 22.1 KB

Line
1	#TODO: the line slicer should listen to all 2DREFRESH events, get the data and slice it
2	# before pushing a new 1D data update.
3
4	#
5	#TODO: NEED MAJOR REFACTOR
6	#
7
8
9	# Debug printout
10	import math
11	import wx
12	from copy import deepcopy
13
14	from BaseInteractor import _BaseInteractor
15	from sans.guicomm.events import NewPlotEvent, StatusEvent
16	from sans.guicomm.events import SlicerParameterEvent,EVT_SLICER_PARS
17
18
19	class SectorInteractor(_BaseInteractor):
20	"""
21	Draw a sector slicer.Allow to performQ averaging on data 2D
22	"""
23	def __init__(self,base,axes,color='black', zorder=3):
24
25	_BaseInteractor.__init__(self, base, axes, color=color)
26	## Class initialization
27	self.markers = []
28	self.axes = axes
29	## connect the plot to event
30	self.connect = self.base.connect
31
32	## compute qmax limit to reset the graph
33	x = math.pow(max(self.base.data2D.xmax,math.fabs(self.base.data2D.xmin)),2)
34	y = math.pow(max(self.base.data2D.ymax,math.fabs(self.base.data2D.ymin)),2)
35	self.qmax= math.sqrt(x + y)
36	## Number of points on the plot
37	self.nbins = 20
38	## Angle of the middle line
39	self.theta2= math.pi/3
40	## Absolute value of the Angle between the middle line and any side line
41	self.phi=math.pi/12
42
43	## Middle line
44	self.main_line = LineInteractor(self, self.base.subplot,color='blue', zorder=zorder, r=self.qmax,
45	theta= self.theta2)
46	self.main_line.qmax = self.qmax
47	## Right Side line
48	self.right_line= SideInteractor(self, self.base.subplot,color='black', zorder=zorder,
49	r=self.qmax,
50	phi= -1*self.phi,
51	theta2=self.theta2)
52	self.right_line.qmax = self.qmax
53	## Left Side line
54	self.left_line= SideInteractor(self, self.base.subplot,color='black', zorder=zorder,
55	r=self.qmax,
56	phi= self.phi,
57	theta2=self.theta2)
58	self.left_line.qmax = self.qmax
59	## draw the sector
60	self.update()
61	self._post_data()
62
63	## Bind to slice parameter events
64	self.base.Bind(EVT_SLICER_PARS, self._onEVT_SLICER_PARS)
65
66
67	def _onEVT_SLICER_PARS(self, event):
68	"""
69	receive an event containing parameters values to reset the slicer
70	@param event: event of type SlicerParameterEvent with params as
71	attribute
72	"""
73	wx.PostEvent(self.base.parent, StatusEvent(status="SectorSlicer._onEVT_SLICER_PARS"))
74	event.Skip()
75	if event.type == self.__class__.__name__:
76	self.set_params(event.params)
77	self.base.update()
78
79
80	def set_layer(self, n):
81	"""
82	Allow adding plot to the same panel
83	@param n: the number of layer
84	"""
85	self.layernum = n
86	self.update()
87
88
89	def clear(self):
90	"""
91	Clear the slicer and all connected events related to this slicer
92	"""
93	self.clear_markers()
94	self.main_line.clear()
95	self.left_line.clear()
96	self.right_line.clear()
97	self.base.connect.clearall()
98	self.base.Unbind(EVT_SLICER_PARS)
99
100
101	def update(self):
102	"""
103	Respond to changes in the model by recalculating the profiles and
104	resetting the widgets.
105	"""
106	# Update locations
107	## Check if the middle line was dragged and update the picture accordingly
108	if self.main_line.has_move:
109	self.main_line.update()
110	self.right_line.update( delta= -self.left_line.phi/2,
111	mline= self.main_line.theta )
112	self.left_line.update( delta = self.left_line.phi/2,
113	mline= self.main_line.theta )
114	## Check if the left side has moved and update the slicer accordingly
115	if self.left_line.has_move:
116	self.main_line.update()
117	self.left_line.update( phi=None, delta=None, mline=self.main_line ,
118	side=True, left=True )
119	self.right_line.update( phi= self.left_line.phi, delta= None,
120	mline= self.main_line, side= True,
121	left=False, right= True )
122	## Check if the right side line has moved and update the slicer accordingly
123	if self.right_line.has_move:
124	self.main_line.update()
125	self.right_line.update( phi=None, delta=None, mline=self.main_line,
126	side=True, left=False, right=True )
127	self.left_line.update( phi=self.right_line.phi, delta=None,
128	mline=self.main_line, side=True, left=False )
129
130
131	def save(self, ev):
132	"""
133	Remember the roughness for this layer and the next so that we
134	can restore on Esc.
135	"""
136	self.base.freeze_axes()
137	self.main_line.save(ev)
138	self.right_line.save(ev)
139	self.left_line.save(ev)
140
141	def _post_data(self, nbins=None):
142	"""
143	compute sector averaging of data2D into data1D
144	@param nbins: the number of point to plot for the average 1D data
145	"""
146	## get the data2D to average
147	data = self.base.data2D
148	# If we have no data, just return
149	if data == None:
150	return
151	## Averaging
152	from DataLoader.manipulations import SectorQ
153	radius = self.qmax
154	phimin = -self.left_line.phi + self.main_line.theta
155	phimax = self.left_line.phi + self.main_line.theta
156
157	if nbins==None:
158	nbins = 20
159	sect = SectorQ(r_min= 0.0, r_max= radius ,
160	phi_min= phimin + math.pi,
161	phi_max= phimax + math.pi, nbins=nbins)
162
163	sector = sect(self.base.data2D)
164	##Create 1D data resulting from average
165	from sans.guiframe.dataFitting import Data1D
166	if hasattr(sector,"dxl"):
167	dxl= sector.dxl
168	else:
169	dxl= None
170	if hasattr(sector,"dxw"):
171	dxw= sector.dxw
172	else:
173	dxw= None
174
175	new_plot = Data1D(x=sector.x,y=sector.y,dy=sector.dy,dxl=dxl,dxw=dxw)
176	new_plot.name = "SectorQ" +"("+ self.base.data2D.name+")"
177
178	new_plot.source=self.base.data2D.source
179	#new_plot.info=self.base.data2D.info
180	new_plot.interactive = True
181	new_plot.detector =self.base.data2D.detector
182	# If the data file does not tell us what the axes are, just assume...
183	new_plot.xaxis("\\rm{Q}", 'A^{-1}')
184	new_plot.yaxis("\\rm{Intensity} ","cm^{-1}")
185	new_plot.group_id = "SectorQ"+self.base.data2D.name
186	new_plot.id = "SectorQ"+self.base.data2D.name
187	wx.PostEvent(self.base.parent, NewPlotEvent(plot=new_plot,
188	title="SectorQ"+self.base.data2D.name ))
189
190
191
192	def moveend(self, ev):
193	"""
194	Called a dragging motion ends.Get slicer event
195	"""
196	self.base.thaw_axes()
197	## Post parameters
198	event = SlicerParameterEvent()
199	event.type = self.__class__.__name__
200	event.params = self.get_params()
201	## Send slicer paramers to plotter2D
202	wx.PostEvent(self.base, event)
203	self._post_data()
204
205
206	def restore(self):
207	"""
208	Restore the roughness for this layer.
209	"""
210	self.main_line.restore()
211	self.left_line.restore()
212	self.right_line.restore()
213
214	def move(self, x, y, ev):
215	"""
216	Process move to a new position, making sure that the move is allowed.
217	"""
218	pass
219
220
221	def set_cursor(self, x, y):
222	pass
223
224
225	def get_params(self):
226	"""
227	Store a copy of values of parameters of the slicer into a dictionary.
228	@return params: the dictionary created
229	"""
230	params = {}
231	## Always make sure that the left and the right line are at phi
232	## angle of the middle line
233	if math.fabs(self.left_line.phi) != math.fabs(self.right_line.phi):
234	raise ValueError,"Phi left and phi right are different %f, %f"%(self.left_line.phi, self.right_line.phi)
235
236	params["Phi"] = self.main_line.theta
237	params["Delta_Phi"] = math.fabs(self.left_line.phi)
238	params["nbins"] = self.nbins
239	return params
240
241
242	def set_params(self, params):
243	"""
244	Receive a dictionary and reset the slicer with values contained
245	in the values of the dictionary.
246	@param params: a dictionary containing name of slicer parameters and
247	values the user assigned to the slicer.
248	"""
249	main = params["Phi"]
250	phi = math.fabs(params["Delta_Phi"] )
251	self.nbins = int(params["nbins"])
252	self.main_line.theta= main
253	## Reset the slicer parameters
254	self.main_line.update()
255	self.right_line.update( phi=phi,delta=None, mline=self.main_line,
256	side=True, right=True )
257	self.left_line.update( phi=phi, delta=None, mline=self.main_line, side=True )
258	## post the new corresponding data
259	self._post_data(nbins=self.nbins)
260
261
262	def freeze_axes(self):
263	self.base.freeze_axes()
264
265
266	def thaw_axes(self):
267	self.base.thaw_axes()
268
269
270	def draw(self):
271	self.base.draw()
272
273
274	class SideInteractor(_BaseInteractor):
275	"""
276	Draw an oblique line
277	@param phi: the phase between the middle line and one side line
278	@param theta2: the angle between the middle line and x- axis
279	"""
280	def __init__(self,base,axes,color='black', zorder=5, r=1.0,phi=math.pi/4, theta2= math.pi/3):
281
282	_BaseInteractor.__init__(self, base, axes, color=color)
283	## Initialize the class
284	self.markers = []
285	self.axes = axes
286	## compute the value of the angle between the current line and
287	## the x-axis
288	self.save_theta = theta2 + phi
289	self.theta= theta2 + phi
290	## the value of the middle line angle with respect to the x-axis
291	self.theta2 = theta2
292	## Radius to find polar coordinates this line's endpoints
293	self.radius = r
294	## phi is the phase between the current line and the middle line
295	self.phi = phi
296
297	## End points polar coordinates
298	x1= self.radius*math.cos(self.theta)
299	y1= self.radius*math.sin(self.theta)
300	x2= -1self.radiusmath.cos(self.theta)
301	y2= -1self.radiusmath.sin(self.theta)
302	## defining a new marker
303	try:
304	self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
305	marker='s', markersize=10,
306	color=self.color, alpha=0.6,
307	pickradius=5, label="pick",
308	zorder=zorder, # Prefer this to other lines
309	visible=True)[0]
310	except:
311	self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
312	marker='s', markersize=10,
313	color=self.color, alpha=0.6,
314	label="pick",
315	visible=True)[0]
316	message = "\nTHIS PROTOTYPE NEEDS THE LATEST VERSION OF MATPLOTLIB\n"
317	message += "Get the SVN version that is at least as recent as June 1, 2007"
318	owner=self.base.base.parent
319	wx.PostEvent(owner, StatusEvent(status="sectorSlicer: %s"%message))
320
321	## Defining the current line
322	self.line = self.axes.plot([x1,x2],[y1,y2],
323	linestyle='-', marker='',
324	color=self.color,
325	visible=True)[0]
326	## Flag to differentiate the left line from the right line motion
327	self.left_moving=False
328	## Flag to define a motion
329	self.has_move=False
330	## connecting markers and draw the picture
331	self.connect_markers([self.inner_marker, self.line])
332
333
334	def set_layer(self, n):
335	"""
336	Allow adding plot to the same panel
337	@param n: the number of layer
338	"""
339	self.layernum = n
340	self.update()
341
342	def clear(self):
343	"""
344	Clear the slicer and all connected events related to this slicer
345	"""
346	self.clear_markers()
347	try:
348	self.line.remove()
349	self.inner_marker.remove()
350	except:
351	# Old version of matplotlib
352	for item in range(len(self.axes.lines)):
353	del self.axes.lines[0]
354
355
356	def update(self, phi=None, delta=None, mline=None,
357	side=False, left= False, right=False):
358	"""
359	Draw oblique line
360	@param phi: the phase between the middle line and the current line
361	@param delta: phi/2 applied only when the mline was moved
362	"""
363	#print "update left or right ", self.has_move
364	self.left_moving=left
365	theta3=0
366	if phi !=None:
367	self.phi= phi
368	if delta==None:
369	delta = 0
370
371	if right:
372	self.phi = -1*math.fabs(self.phi)
373	#delta=-delta
374	else:
375	self.phi =math.fabs(self.phi)
376	if side:
377	self.theta= mline.theta + self.phi
378
379	if mline!=None :
380	if delta!=0:
381	self.theta2 = mline+delta
382	else:
383	self.theta2 = mline.theta
384	if delta==0:
385	theta3=self.theta+delta
386	else:
387	theta3=self.theta2+delta
388
389
390	x1= self.radius*math.cos(theta3)
391	y1= self.radius*math.sin(theta3)
392	x2= -1self.radiusmath.cos(theta3)
393	y2= -1self.radiusmath.sin(theta3)
394
395	self.inner_marker.set(xdata=[x1/2.5],ydata=[y1/2.5])
396	self.line.set(xdata=[x1,x2], ydata=[y1,y2])
397
398
399
400
401	def save(self, ev):
402	"""
403	Remember the roughness for this layer and the next so that we
404	can restore on Esc.
405	"""
406	self.save_theta= self.theta
407	self.base.freeze_axes()
408
409	def moveend(self, ev):
410
411	self.has_move=False
412	self.base.moveend(ev)
413
414	def restore(self):
415	"""
416	Restore the roughness for this layer.
417	"""
418	self.theta = self.save_theta
419
420	def move(self, x, y, ev):
421	"""
422	Process move to a new position, making sure that the move is allowed.
423	"""
424
425	self.theta= math.atan2(y,x)
426	self.has_move=True
427	#ToDo: Simplify below
428	if not self.left_moving:
429	if self.theta2-self.theta <= 0 and self.theta2>0:#>= self.theta2:
430	#print "my theta", self.theta
431	self.restore()
432	return
433	elif self.theta2 < 0 and self.theta < 0 and self.theta-self.theta2 >= 0:
434	self.restore()
435	return
436	elif self.theta2 < 0 and self.theta > 0 and self.theta2+2*math.pi-self.theta >=math.pi/2:
437	#print "my theta", self.theta
438	self.restore()
439	return
440	elif self.theta2 < 0 and self.theta < 0 and self.theta2-self.theta >=math.pi/2:
441	#print "my theta", self.theta
442	self.restore()
443	return
444	elif self.theta2>0 and (self.theta2-self.theta >= math.pi/2 or (self.theta2-self.theta >= math.pi/2)):#<= self.theta2 -math.pi/2:
445	#print "self theta encore"
446	self.restore()
447	return
448	else:
449	#print "left move"
450	if self.theta < 0 and self.theta+math.pi*2-self.theta2 <= 0:
451	self.restore()
452	return
453	elif self.theta2 < 0 and self.theta-self.theta2 <= 0:
454	self.restore()
455	return
456	elif self.theta > 0 and self.theta-self.theta2 <=0:
457	#print "my theta", self.theta
458	self.restore()
459	return
460	elif self.theta-self.theta2 >= math.pi/2 or (self.theta+math.pi*2-self.theta2 >= math.pi/2 and self.theta<0 and self.theta2>0):
461	#print "self theta encore"
462	self.restore()
463	return
464
465	self.phi= math.fabs(self.theta2 - self.theta)
466	if self.phi>math.pi:
467	self.phi= 2*math.pi-math.fabs(self.theta2 - self.theta)
468
469	#print "move , self.phi, self.theta,", self.theta180/math.pi,self.theta2180/math.pi,self.phi*180/math.pi
470
471
472
473	self.base.base.update()
474
475	def set_cursor(self, x, y):
476	self.move(x, y, None)
477	self.update()
478
479
480	def get_params(self):
481	params = {}
482	params["radius"] = self.radius
483	params["theta"] = self.theta
484	return params
485
486	def set_params(self, params):
487
488	x = params["radius"]
489	self.set_cursor(x, self._inner_mouse_y)
490
491
492
493	class LineInteractor(_BaseInteractor):
494	"""
495	Select an annulus through a 2D plot
496	"""
497	def __init__(self,base,axes,color='black', zorder=5, r=1.0,theta=math.pi/4):
498
499	_BaseInteractor.__init__(self, base, axes, color=color)
500	self.markers = []
501	self.axes = axes
502
503	self.save_theta = theta
504	self.theta= theta
505
506	self.radius = r
507
508	self.scale = 10.0
509
510	#raise "Version error", message
511
512	# Inner circle
513	x1= self.radius*math.cos(self.theta)
514	y1= self.radius*math.sin(self.theta)
515	x2= -1self.radiusmath.cos(self.theta)
516	y2= -1self.radiusmath.sin(self.theta)
517	try:
518	# Inner circle marker
519	self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
520	marker='s', markersize=10,
521	color=self.color, alpha=0.6,
522	pickradius=5, label="pick",
523	zorder=zorder, # Prefer this to other lines
524	visible=True)[0]
525	except:
526	self.inner_marker = self.axes.plot([x1/2.5],[y1/2.5], linestyle='',
527	marker='s', markersize=10,
528	color=self.color, alpha=0.6,
529	label="pick",
530	visible=True)[0]
531	message = "\nTHIS PROTOTYPE NEEDS THE LATEST VERSION OF MATPLOTLIB\n"
532	message += "Get the SVN version that is at least as recent as June 1, 2007"
533
534
535	self.line = self.axes.plot([x1,x2],[y1,y2],
536	linestyle='-', marker='',
537	color=self.color,
538	visible=True)[0]
539
540	self.npts = 20
541	self.has_move=False
542	self.connect_markers([self.inner_marker, self.line])
543	self.update()
544
545	def set_layer(self, n):
546	self.layernum = n
547	self.update()
548
549	def clear(self):
550	self.clear_markers()
551	try:
552	self.inner_marker.remove()
553	self.line.remove()
554	except:
555	# Old version of matplotlib
556	for item in range(len(self.axes.lines)):
557	del self.axes.lines[0]
558
559
560	def update(self, theta=None):
561	"""
562	Draw the new roughness on the graph.
563	"""
564
565	if theta !=None:
566	self.theta= theta
567	x1= self.radius*math.cos(self.theta)
568	y1= self.radius*math.sin(self.theta)
569	x2= -1self.radiusmath.cos(self.theta)
570	y2= -1self.radiusmath.sin(self.theta)
571
572	self.inner_marker.set(xdata=[x1/2.5],ydata=[y1/2.5])
573	self.line.set(xdata=[x1,x2], ydata=[y1,y2])
574
575
576
577	def save(self, ev):
578	"""
579	Remember the roughness for this layer and the next so that we
580	can restore on Esc.
581	"""
582	self.save_theta= self.theta
583	self.base.freeze_axes()
584
585	def moveend(self, ev):
586
587	self.has_move=False
588	self.base.moveend(ev)
589
590	def restore(self):
591	"""
592	Restore the roughness for this layer.
593	"""
594	self.theta = self.save_theta
595
596	def move(self, x, y, ev):
597	"""
598	Process move to a new position, making sure that the move is allowed.
599	"""
600
601	self.theta= math.atan2(y,x)
602	#print "main_line previous theta --- next theta ",math.degrees(self.save_theta),math.degrees(self.theta)
603
604	self.has_move=True
605
606	self.base.base.update()
607
608	def set_cursor(self, x, y):
609	self.move(x, y, None)
610	self.update()
611
612
613	def get_params(self):
614	params = {}
615	params["radius"] = self.radius
616	params["theta"] = self.theta
617	return params
618
619	def set_params(self, params):
620
621	x = params["radius"]
622	self.set_cursor(x, self._inner_mouse_y)
623
624
625

Note: See TracBrowser for help on using the repository browser.

SasView

source: sasview/guiframe/local_perspectives/plotting/SectorSlicer.py @ 37f487e

Download in other formats: