source: sasmodels/sasmodels/models/elliptical_cylinder.py @ c612162

# pylint: disable=line-too-long
r"""
This function calculates the scattering from an elliptical cylinder.

Definition for 2D (orientated system)
-------------------------------------

The angles |theta| and |phi| define the orientation of the axis of the cylinder. The angle |bigpsi| is defined as the
orientation of the major axis of the ellipse with respect to the vector *Q*\ . A gaussian polydispersity can be added
to any of the orientation angles, and also for the minor radius and the ratio of the ellipse radii.

.. image:: img/elliptical_cylinder_geometry.gif

    *Figure.* *a* = *r_minor* and |nu|\ :sub:`n` = $r_ratio$ (i.e., $r_major / r_minor$).

The function calculated is

.. math::
    I(\mathbf{q})=\frac{1}{V_{cyl}}\int{d\psi}\int{d\phi}\int{p(\theta,\phi,\psi)F^2(\mathbf{q},\alpha,\psi)\sin(\theta)d\theta}

with the functions

.. math::
    F(\mathbf{q},\alpha,\psi)=2\frac{J_1(a)\sin(b)}{ab} 
    \\
    a = \mathbf{q}\sin(\alpha)\left[ r^2_{major}\sin^2(\psi)+r^2_{minor}\cos(\psi) \right]^{1/2}
    \\
    b=\mathbf{q}\frac{L}{2}\cos(\alpha)

and the angle |bigpsi| is defined as the orientation of the major axis of the ellipse with respect to the vector *q*\ .


Definition for 1D (no preferred orientation)
--------------------------------------------

The form factor is averaged over all possible orientation before normalized by the particle volume

.. math::
    P(q) = scale  <F^2> / V

The returned value is scaled to units of |cm^-1|.

To provide easy access to the orientation of the elliptical cylinder, we define the axis of the cylinder using two
angles |theta|, |phi| and |bigpsi|. As for the case of the cylinder, the angles |theta| and |phi| are defined on
Figure 2 of CylinderModel. The angle |bigpsi| is the rotational angle around its own long_c axis against the *q* plane.
For example, |bigpsi| = 0 when the *r_minor* axis is parallel to the *x*\ -axis of the detector.

All angle parameters are valid and given only for 2D calculation; ie, an oriented system.

.. image:: img/elliptical_cylinder_geometry_2d.jpg

    *Figure. Definition of angles for 2D*

.. image:: img/core_shell_bicelle_fig2.jpg

    *Figure. Examples of the angles for oriented elliptical cylinders against the detector plane.*

NB: The 2nd virial coefficient of the cylinder is calculated based on the averaged radius (= sqrt(*r_minor*\ :sup:`2` \* *r_ratio*))
and length values, and used as the effective radius for *S(Q)* when *P(Q)* \* *S(Q)* is applied.


.. image:: img/elliptical_cylinder_comparison_1d.jpg

    *Figure. 1D plot using the default values (w/1000 data point).*

Validation
----------

Validation of our code was done by comparing the output of the 1D calculation to the angular average of the output of
the 2D calculation over all possible angles. The figure below shows the comparison where the solid dot refers to
averaged 2D values while the line represents the result of the 1D calculation (for the 2D averaging, values of 76, 180,
and 76 degrees are taken for the angles of |theta|, |phi|, and |bigpsi| respectively).

.. image:: img/elliptical_cylinder_validation_1d.gif

    *Figure. Comparison between 1D and averaged 2D.*

In the 2D average, more binning in the angle |phi| is necessary to get the proper result. The following figure shows
the results of the averaging by varying the number of angular bins.

.. image:: img/elliptical_cylinder_averaging.gif

    *Figure. The intensities averaged from 2D over different numbers of bins and angles.*

Reference
---------

L A Feigin and D I Svergun, *Structure Analysis by Small-Angle X-Ray and Neutron Scattering*, Plenum,
New York, (1987)
"""

import math
from numpy import pi, inf

name = "elliptical_cylinder"
title = "Form factor for an elliptical cylinder."
description = """
    Form factor for an elliptical cylinder.
    See L A Feigin and D I Svergun, Structure Analysis by Small-Angle X-Ray and Neutron Scattering, Plenum, New York, (1987).
"""
category = "shape:cylinder"

# pylint: disable=bad-whitespace, line-too-long
#             ["name", "units", default, [lower, upper], "type","description"],
parameters = [["r_minor",     "Ang",        20.0,  [0, inf],    "volume",      "Ellipse minor radius"],
              ["r_ratio",     "",           1.5,   [1, inf],    "volume",      "Ratio of major radius over minor radius"],
              ["length",      "Ang",        400.0, [1, inf],    "volume",      "Length of the cylinder"],
              ["sld",         "1e-6/Ang^2", 4.0,   [-inf, inf], "",            "Cylinder scattering length density"],
              ["solvent_sld", "1e-6/Ang^2", 1.0,   [-inf, inf], "",            "Solvent scattering length density"],
              ["theta",       "degrees",    90.0,  [-360, 360], "orientation", "In plane angle"],
              ["phi",         "degrees",    0,     [-360, 360], "orientation", "Out of plane angle"],
              ["psi",         "degrees",    0,     [-360, 360], "orientation", "Major axis angle relative to Q"]]

# pylint: enable=bad-whitespace, line-too-long

source = ["lib/nr_bess_j1.c", "lib/gauss76.c", "lib/gauss20.c", "elliptical_cylinder.c"]

demo = dict(scale=1, background=0, r_minor=100, r_ratio=1.5, length=400.0,
            sld=4.0, solvent_sld=1.0, theta=10.0, phi=20, psi=30, theta_pd=10, phi_pd=2, psi_pd=3)

oldname = 'EllipticalCylinderModel'
oldpars = dict(theta='cyl_theta', phi='cyl_phi', psi='cyl_psi', sld='sldCyl', solvent_sld='sldSolv')

def ER(r_minor, r_ratio, length):
    """
        Equivalent radius
        @param r_minor: Ellipse minor radius
        @param r_ratio: Ratio of major radius over minor radius
        @param length: Length of the cylinder
    """
    r = math.sqrt(r_minor * r_minor * r_ratio)
    ddd = 0.75 * r * (2 * r * length + (length + r) * (length + pi * r))
    return 0.5 * (ddd) ** (1. / 3.)

tests = [[{'r_minor': 20.0, 'r_ratio': 1.5, 'length':400.0}, 'ER', 79.89245454155024],
         [{'r_minor': 20.0, 'r_ratio': 1.2, 'length':300.0}, 'VR', 1],

         # The SasView test result was 0.00169, with a background of 0.001
         [{'r_minor': 20.0,
           'r_ratio': 1.5,
           'sld': 4.0,
           'length':400.0,
           'solvent_sld':1.0,
           'background':0.0
          }, 0.001, 675.504402]]