source: sasmodels/sasmodels/models/core_shell_parallelepiped.c @ 2222134

double form_volume(double length_a, double length_b, double length_c, 
                   double thick_rim_a, double thick_rim_b, double thick_rim_c);
double Iq(double q, double core_sld, double arim_sld, double brim_sld, double crim_sld,
          double solvent_sld, double length_a, double length_b, double length_c,
          double thick_rim_a, double thick_rim_b, double thick_rim_c);
double Iqxy(double qx, double qy, double core_sld, double arim_sld, double brim_sld,
            double crim_sld, double solvent_sld, double length_a, double length_b,
            double length_c, double thick_rim_a, double thick_rim_b,
            double thick_rim_c, double theta, double phi, double psi);

double form_volume(double length_a, double length_b, double length_c, 
                   double thick_rim_a, double thick_rim_b, double thick_rim_c)
{
    //return length_a * length_b * length_c;
    return length_a * length_b * length_c + 
           2.0 * thick_rim_a * length_b * length_c + 
           2.0 * thick_rim_b * length_a * length_c +
           2.0 * thick_rim_c * length_a * length_b;
}

double Iq(double q,
    double core_sld,
    double arim_sld,
    double brim_sld,
    double crim_sld,
    double solvent_sld,
    double length_a,
    double length_b,
    double length_c,
    double thick_rim_a,
    double thick_rim_b,
    double thick_rim_c)
{
    // Code converted from functions CSPPKernel and CSParallelepiped in libCylinder.c_scaled
    // Did not understand the code completely, it should be rechecked (Miguel Gonzalez)
    
    double t1, t2, t3, t4, tmp, answer;   
    double mu = q * length_b;
    
    //calculate volume before rescaling (in original code, but not used)
    //double vol = form_volume(length_a, length_b, length_c, thick_rim_a, thick_rim_b, thick_rim_c);            
    //double vol = length_a * length_b * length_c + 
    //       2.0 * thick_rim_a * length_b * length_c + 
    //       2.0 * thick_rim_b * length_a * length_c +
    //       2.0 * thick_rim_c * length_a * length_b;
    
    // Scale sides by B
    double a_scaled = length_a / length_b;
    double c_scaled = length_c / length_b;

    // DelRho values (note that drC is not used later)       
        double dr0 = core_sld-solvent_sld;
        double drA = arim_sld-solvent_sld;
        double drB = brim_sld-solvent_sld;
        //double drC = crim_sld-solvent_sld;

    //Order of integration
    int nordi=76;                               
    int nordj=76;
    
    // outer integral (with nordi gauss points), integration limits = 0, 1
    double summ = 0; //initialize integral

    for( int i=0; i<nordi; i++) {
                
        // inner integral (with nordj gauss points), integration limits = 0, 1
        
        double summj = 0.0;
            double sigma = 0.5 * ( Gauss76Z[i] + 1.0 );         
                
            for(int j=0; j<nordj; j++) {

            double uu = 0.5 * ( Gauss76Z[j] + 1.0 );
            double mudum = mu * sqrt(1.0-sigma*sigma);

                double Vin = length_a * length_b * length_c;
                //double Vot = (length_a * length_b * length_c +
            //            2.0 * thick_rim_a * length_b * length_c +
            //            2.0 * length_a * thick_rim_b * length_c +
            //            2.0 * length_a * length_b * thick_rim_c);
                double V1 = (2.0 * thick_rim_a * length_b * length_c);    // incorrect V1 (aa*bb*cc+2*ta*bb*cc)
                double V2 = (2.0 * length_a * thick_rim_b * length_c);    // incorrect V2(aa*bb*cc+2*aa*tb*cc)
        
            // ta and tb correspond to the definitions in CSPPKernel, but they don't make sense to me (MG)
            // the a_scaled in the definition of tb was present in CSPPKernel in libCylinder.c,
            // while in cspkernel in csparallelepiped.cpp (used for the 2D), all the definitions
            // for ta, tb, tc use also A + 2*rim_thickness (but not scaled by B!!!)            
            double ta = (a_scaled+2.0*thick_rim_a)/length_b; 
            double tb = (a_scaled+2.0*thick_rim_b)/length_b;
    
                double arg1 = (0.5*mudum*a_scaled) * sin(0.5*M_PI*uu);
                double arg2 = (0.5*mudum) * cos(0.5*M_PI*uu);
                double arg3=  (0.5*mudum*ta) * sin(0.5*M_PI*uu);
                double arg4=  (0.5*mudum*tb) * cos(0.5*M_PI*uu);

                if(arg1==0.0){
                        t1 = 1.0;
                } else {
                        t1 = (sin(arg1)/arg1);                //defn for CSPP model sin(arg1)/arg1    test:  (sin(arg1)/arg1)*(sin(arg1)/arg1)   
                }
                if(arg2==0.0){
                        t2 = 1.0;
                } else {
                        t2 = (sin(arg2)/arg2);           //defn for CSPP model sin(arg2)/arg2   test: (sin(arg2)/arg2)*(sin(arg2)/arg2)    
                }       
                if(arg3==0.0){
                        t3 = 1.0;
                } else {
                        t3 = sin(arg3)/arg3;
                }
                if(arg4==0.0){
                        t4 = 1.0;
                } else {
                        t4 = sin(arg4)/arg4;
                }
            
            // Expression in libCylinder.c (neither drC nor Vot are used)
                tmp =( dr0*t1*t2*Vin + drA*(t3-t1)*t2*V1+ drB*t1*(t4-t2)*V2 )*( dr0*t1*t2*Vin + drA*(t3-t1)*t2*V1+ drB*t1*(t4-t2)*V2 );   //  correct FF : square of sum of phase factors            
            
            // To note also that in csparallelepiped.cpp, there is a function called
            // cspkernel, which seems to make more sense and has the following comment:
            //   This expression is different from NIST/IGOR package (I strongly believe the IGOR is wrong!!!). 10/15/2010.
            //   tmp =( dr0*tmp1*tmp2*tmp3*Vin + drA*(tmpt1-tmp1)*tmp2*tmp3*V1+ drB*tmp1*(tmpt2-tmp2)*tmp3*V2 + drC*tmp1*tmp2*(tmpt3-tmp3)*V3)*
            //   ( dr0*tmp1*tmp2*tmp3*Vin + drA*(tmpt1-tmp1)*tmp2*tmp3*V1+ drB*tmp1*(tmpt2-tmp2)*tmp3*V2 + drC*tmp1*tmp2*(tmpt3-tmp3)*V3);   //  correct FF : square of sum of phase factors
            // This is the function called by csparallelepiped_analytical_2D_scaled,
            // while CSParallelepipedModel calls CSParallelepiped in libCylinder.c        
            
            summj += Gauss76Wt[j] * tmp;

        }
                
        // value of the inner integral
        answer = 0.5 * summj;

                // finish the outer integral 
                double arg = 0.5 * mu* c_scaled *sigma;
                if ( arg == 0.0 ) {
                        answer *= 1.0;
                } else {
                answer *= sin(arg)*sin(arg)/arg/arg;
                }
                
                // now sum up the outer integral
                summ += Gauss76Wt[i] * answer;

    }
    
        answer = 0.5 * summ;

        //convert from [1e-12 A-1] to [cm-1]
        answer *= 1.0e-4;
        
        return answer;
}

double Iqxy(double qx, double qy,
    double core_sld,
    double arim_sld,
    double brim_sld,
    double crim_sld,
    double solvent_sld,
    double length_a,
    double length_b,
    double length_c,
    double thick_rim_a,
    double thick_rim_b,
    double thick_rim_c,
    double theta,
    double phi,
    double psi)
{
    double tmp1, tmp2, tmp3, tmpt1, tmpt2, tmpt3;   

    double q = sqrt(qx*qx+qy*qy);
    double qx_scaled = qx/q;
    double qy_scaled = qy/q;

    // Convert angles given in degrees to radians
    theta *= M_PI_180;
    phi   *= M_PI_180;
    psi   *= M_PI_180;
    
    // Parallelepiped c axis orientation
    double cparallel_x = cos(theta) * cos(phi);
    double cparallel_y = sin(theta);
    
    // Compute angle between q and parallelepiped axis
    double cos_val_c = cparallel_x*qx_scaled + cparallel_y*qy_scaled;// + cparallel_z*qz;

    // Parallelepiped a axis orientation
    double parallel_x = -cos(phi)*sin(psi) * sin(theta)+sin(phi)*cos(psi);
    double parallel_y = sin(psi)*cos(theta);
    double cos_val_a = parallel_x*qx_scaled + parallel_y*qy_scaled;

    // Parallelepiped b axis orientation
    double bparallel_x = -sin(theta)*cos(psi)*cos(phi)-sin(psi)*sin(phi);
    double bparallel_y = cos(theta)*cos(psi);
    double cos_val_b = bparallel_x*qx_scaled + bparallel_y*qy_scaled;

    // The following tests should always pass
    if (fabs(cos_val_c)>1.0) {
      //printf("parallel_ana_2D: Unexpected error: cos(alpha)>1\n");
      cos_val_c = 1.0;
    }
    if (fabs(cos_val_a)>1.0) {
      //printf("parallel_ana_2D: Unexpected error: cos(alpha)>1\n");
      cos_val_a = 1.0;
    }
    if (fabs(cos_val_b)>1.0) {
      //printf("parallel_ana_2D: Unexpected error: cos(alpha)>1\n");
      cos_val_b = 1.0;
    }
    
    // cspkernel in csparallelepiped recoded here 
    double dr0 = core_sld-solvent_sld;
        double drA = arim_sld-solvent_sld;
        double drB = brim_sld-solvent_sld;
        double drC = crim_sld-solvent_sld;
        double Vin = length_a * length_b * length_c;
    // As for the 1D case, Vot is not used
        //double Vot = (length_a * length_b * length_c +
    //              2.0 * thick_rim_a * length_b * length_c +
    //              2.0 * length_a * thick_rim_b * length_c +
    //              2.0 * length_a * length_b * thick_rim_c);
        double V1 = (2.0 * thick_rim_a * length_b * length_c);    // incorrect V1 (aa*bb*cc+2*ta*bb*cc)
        double V2 = (2.0 * length_a * thick_rim_b * length_c);    // incorrect V2(aa*bb*cc+2*aa*tb*cc)
    double V3 = (2.0 * length_a * length_b * thick_rim_c);
    // The definitions of ta, tb, tc are not the same as in the 1D case because there is no
    // the scaling by B. The use of length_a for the 3 of them seems clearly a mistake to me,
    // but for the moment I let it like this until understanding better the code.
        double ta = length_a + 2.0*thick_rim_a;
    double tb = length_a + 2.0*thick_rim_b;
    double tc = length_a + 2.0*thick_rim_c;
    //handle arg=0 separately, as sin(t)/t -> 1 as t->0
    double argA = 0.5*q*length_a*cos_val_a;
    double argB = 0.5*q*length_b*cos_val_b;
    double argC = 0.5*q*length_c*cos_val_c;
    double argtA = 0.5*q*ta*cos_val_a;
    double argtB = 0.5*q*tb*cos_val_b;
    double argtC = 0.5*q*tc*cos_val_c;
    
    if(argA==0.0) {
        tmp1 = 1.0;
    } else {
        tmp1 = sin(argA)/argA;
    }
    if (argB==0.0) {
        tmp2 = 1.0;
    } else {
        tmp2 = sin(argB)/argB;
    }
    if (argC==0.0) {
        tmp3 = 1.0;
    } else {
        tmp3 = sin(argC)/argC;
    }
    if(argtA==0.0) {
        tmpt1 = 1.0;
    } else {
        tmpt1 = sin(argtA)/argtA;
    }
    if (argtB==0.0) {
        tmpt2 = 1.0;
    } else {
        tmpt2 = sin(argtB)/argtB;
    }
    if (argtC==0.0) {
        tmpt3 = 1.0;
    } else {
        tmpt3 = sin(argtC)*sin(argtC)/argtC/argtC;
    }

    // f uses Vin, V1, V2, and V3 and it seems to have more sense than the value computed
    // in the 1D code, but should be checked!
    double f = ( dr0*tmp1*tmp2*tmp3*Vin + drA*(tmpt1-tmp1)*tmp2*tmp3*V1 + 
               drB*tmp1*(tmpt2-tmp2)*tmp3*V2 + drC*tmp1*tmp2*(tmpt3-tmp3)*V3);
   
    return 1.0e-4 * f * f;
}